#High-Speed Connector Market

[tritonmarketresearchamey]

Global High Speed Connector: 2024-2032 Market Evaluation

As per Triton Market Research, the Global High Speed Connector Market report is sectioned into Product (Board-To-Cable, Board-To-Board, Other Products), Application (Communication, Aerospace & Avionics, Energy & Power, Automotive, Electronics, Other Applications), and Regional Outlook (Asia-Pacific, Middle East and Africa, Europe, North America, Latin America).

The report further includes the Market Summary, Industry Outlook, Porter’s Five Forces Analysis, Market Attractiveness Index, Supply Chain Analysis, Regulatory Framework, Key Market Strategies, Market Drivers, Challenges, Opportunities, Analyst Perspective, Competitive Landscape, Research Methodology and scope, Global Market Size, Forecasts & Analysis (2024-2032).

As per Triton’s report, the global high speed connector market is set to advance at a CAGR of 9.15% during the forecast period 2024-2032.

High-speed connectors are created to facilitate the swift and dependable transmission of data among electronic devices. Their significance lies in fostering effective and smooth communication across a range of applications, such as telecommunications, computing, automotive systems, etc.

Factors such as increasing demand for data transmission, rapid growth in IoT, demand for high-performance computing, and advancements in automotive electronics. Automotive manufacturers are increasingly incorporating electronic and infotainment systems into vehicles to enhance connectivity. This trend presents opportunities for connector manufacturers to devise streamlined and space-efficient solutions that align with the evolving requirements.

However, compatibility issues with legacy systems and challenges in miniaturization hamper the high speed connector market’s development.

Furthermore, carmakers are progressively integrating electronic and infotainment systems into vehicles to improve connectivity. This development offers opportunities for connector manufacturers to create efficient solutions that meet the changing requirements.

The notable companies in the high speed connector market consist of TE Connectivity, Yamaichi, Neoconix Inc, Electronics Co Ltd, Hirose Electric Co Ltd, Oupiin Enterprise Co Ltd, Omron Corporation, Molex LLC, IMS Connector Systems, Samtec, and Fujitsu.

As the demand for greater data rates persists, connectors must evolve to accommodate higher bandwidths while safeguarding signal integrity. The market for connectors adept at facilitating high-speed data transmission is on the rise, driven by the needs of applications such as data centers, telecommunications, and high-performance computing. This surge is contributing to the growth of the connector market.

[govindhtech]

MSI MAG 271QPX E2 Boasts Gen 3 QD-OLED Panel

A new iteration of MSI’s gaming monitor, the MAG 271QPX QD-OLED E2, has been quietly unveiled. Remarkably, one of the first gaming monitors with a brand-new, never-before-released Gen 3 QD-OLED panel is the MAG 271QPX QD-OLED E2.

MSI released the MAG 271QPX QD-OLED ($749.99 on Amazon) months ago.MSI monitors use Gen 3 QD-OLED panel with 360 Hz refresh rates and 1440p resolution. Samsung may have secretly debuted a Gen 3 QD-OLED panel with a reduced refresh rate.

MSI has added the MAG 271QPX QD-OLED E2 to its US website, although prices are unknown. To the best of their knowledge, the panel is shared by the Gigabyte AORUS FO27Q2 and MAG 271QPX QD-OLED E2.

Thus, the MAG 271QPX QD-OLED E2 outputs at 1440p with a full panel brightness of 250 nits and a 0.03 ms GtG reaction time. The display also achieves VESA ClearMR 13000 and DisplayHDR True Black 400 standards, peaking with 1,000 nits when watching HDR material (APL 3%) overall.

The MAG 271QPX QD-OLED E2 differs from the MAG 271QPX QD-OLED in that it provides a refresh rate of 240 Hz. Nevertheless, MSI offers a three-year warranty against OLED burn-in in addition to its unique fan-less cooling system and OLED Care 2.0 technology.

MAG 271QPX QD-OLED

Strong connectivity possibilities are also offered by two HDMI 2.1 connectors, each of which can handle 48 Gbps of bandwidth. In order to work with PlayStation 5 and Xbox Series S|X consoles, the MAG 271QPX QD-OLED E2 supports Auto Low Latency Mode (ALLM) and Variable Refresh Rate (VRR) technology. For further connecting possibilities, please refer to the figure below.

Although the exact release date for any TV or monitor utilizing the Gen 3 QD-OLED panel is unknown, the following is known:

Announcement: In early 2024, Samsung Display made the Gen 3 QD-OLED panel official. Product Availability: These Gen 3 panels were already used in a number of ASUS, MSI, and Dell monitor models that were released in 2024.

As of May 2024, there are a few new Gen 3 QD-OLED displays on the market. Here are two instances:

MSI 271QPX QD-OLED E2.This 27-inch 1440p display with a 360Hz refresh rate is ideal for competitive gamers.

ROG Swift OLED ASUS PG32UCDM4K-resolution 32-inch monitor with 240 Hz refresh rate.

A large, smooth-refreshing display with good quality is ideal for gaming.

Both displays provide deep blacks, rich colours, and fast response speeds.

For tear-free gaming, they support G-Sync and FreeSync.

Consider these extras when buying a Gen 3 QD-OLED display:

Cost: Gen 3 QD-OLED displays are still somewhat pricey and new. These are premium displays, so be prepared to pay more.

Dimensions and Resolution: Gen 3 QD-OLED panels are currently available in 27-inch 1440p and 32-inch 4K sizes.

Select a refresh rate based on what you require. For competitive gamers, a 360Hz refresh rate monitor may be ideal. Professional creatives and casual gamers can handle 240Hz refresh rates.

That’s right! You have cutting-edge display technology. New gaming monitor MSI MAG 271QPX QD-OLED E2 has a Gen 3 QD-OLED screen.

Gen 3 QD-OLED Panel has these notable features:

Gen 3 QD-OLED Panel has vivid colours, deep blacks, and 0.03ms GtG for fast-paced gameplay.

1440p (2560 x 1440): Most gamers like this resolution’s performance and clarity.

High 360Hz refresh rate guarantees smooth graphics in tough games.

VESA DisplayHDR True Black 400 boosts contrast and highlights on the monitor.

Ergonomic stands tilt, swivel, raise, and pivot for viewing comfort.

It has two HDMI 2.1 ports, one DisplayPort 1.4 port, a 15W PD USB 3.2 Type-C port, and a 3.5mm headphone jack.

This premium gaming monitor, the MSI MAG 271QPX QD-OLED E2, gives competitive players great features and performance.

Gen 3 QD-OLED screens are expensive

Seeing static images for long durations can cause burn-in, as with other OLED screens. For dedicated gamers wanting best performance and visual quality, the MSI MAG 271QPX QD-OLED E2 is ideal.

Gen 3 QD-OLED panel gives the MSI MAG 271QPX QD-OLED E2 outstanding specs

Show:

Dimensions: (flat panel) 27 inches

Resolution: WQHD, 2560 x 1440

Type of Panel: QD-OLED Next-Gen (Gen 3)

16:9 aspect ratio

Achievement:

360 Hz refresh rate – The exceptionally smooth images produced by this ultra-fast refresh rate make it perfect for competitive gaming.

Response Time: 0.03 ms (GtG) – This blazingly quick response time reduces ghosting and blurring, making it ideal for action-packed, quick-paced games.

Image Quality:

High contrast, rich blacks, and vivid colours are guaranteed by the VESA DisplayHDR True Black 400 certification, providing an amazing HDR experience.

Excellent colour accuracy is claimed by MSI (precise numbers are not yet available).

Interface:

48Gbps HDMI 2.1 ports – Supports high frame rates (up to 120Hz) for PS5 and Xbox Series X consoles.

DisplayPort USB Type-C (functionality specifics not available yet)

Extras:

For customisation, use the MSI Arsenal Gaming OSD (On-Screen Display).

Compatible with VESA mounts

Technology that doesn’t flicker to lessen eye strain

OLED Care 2.0: A solution developed by MSI to lessen the possibility of OLED burn-in

Read more on govindhtech.com

[suntelecomcn]

Data Center Cabling Solution: Active Optical Cable

As data rates rise and data center grows in size, copper cable is getting stretched to its limits. However,  active optical cable (AOC) has emerged to replace copper cable in data centers and high-performance computing (HPC) applications. It provides high-speed, high reliability, high flexibility, and low power consumption. This article will provide some knowledge of AOC cable. 

What is an Active Optical Cable?

Active optical cable (AOC) is an optical fiber jumper cable terminated with optical transceivers on both ends. It uses electrical-to-optical conversion on the cable ends to improve the speed and distance performance of the cable without sacrificing compatibility with standard electrical interfaces.

Active Optical Cable Structure

AOC cable consists of the fiber optic connector and fiber cable. The connection between fiber cable and fiber optic connectors is not separable. If the fiber optic connector or fiber cable needs to be changed, they should be removed together. The electrical and optical signal conversion can be achieved right through each end of the optical fiber.

Active Optical Cable Types

There are several varieties of AOC cable available on the market , including 10G SFP+ AOC, 25G SFP28 AOC,40G QSFP+ AOC, 56G QSFP+ AOC, 40G QSFP+ to 4x SFP+ breakout AOC, 40G QSFP+ to 8x LC breakout AOC, 100G QSFP28 AOC, 100G QSFP28 to 4x SFP28 breakout AOC and 120G CXP AOC, etc. These AOC cables are commonly used for short-range multi-lane data communication and interconnect applications between two devices, such as rack-to-rack, shelf-to-shelf interconnect, storage, hubs, switches, routers, servers, etc.

Features and Benefits

AOC cable provides low power consumption, high density, high speed, high reliability, high security, small size, strong heat dissipation, low electromagnetic interference, long transmission distance, low energy consumption, low latency, lightweight, and ease of installation.

Application Scenarios

AOC Cable is used to connect top-of-row (ToR) switches to end-of-row aggregation switches, and to connect the ToR switch with storage subsystems at reaches greater than direct attach copper (DAC) limits of 3-7 meters. The following three scenarios show the specific applications.

Scenario 1:  AOC cable is used to connect two switches directly.

Scenario 2: The breakout AOC cable provides a highly cost-effective way to connect within racks and across adjacent racks. The following figure shows 40GbE QSFP+ to 4 x SFP+ AOC cable connecting to a 40G QSFP+ port switch on one end, and to four 10G SFP+ port switches on the other end.

Scenario 3: For the long-haul transmission between the two switches, a suitable solution is recommended to use single-mode patch cable, OEO converters, and AOC cables, which can provide seamless integration of different fiber types by converting multi-mode fiber to single-mode fiber.

Conclusion

AOC cable achieves high data rates over long reaches interconnection, which is the best solution for data centers and high-performance computing applications. Sun Telecom specializes in providing one-stop total fiber optic solutions for all fiber optic application industries worldwide. Contact us if any needs.

[forlinx]

Introduction to RK3588

What is RK3588?

RK3588 is a universal SoC with ARM architecture, which integrates quad-core Cortex-A76 (large core) and quad-core Cortex-A55(small core). Equipped with G610 MP4 GPU, which can run complex graphics processing smoothly. Embedded 3D GPU makes RK3588 fully compatible with OpenGLES 1.1, 2.0 and 3.2, OpenCL up to 2.2 and Vulkan1.2. A special 2D hardware engine with MMU will maximize display performance and provide smooth operation. And a 6 TOPs NPU empowers various AI scenarios, providing possibilities for local offline AI computing in complex scenarios, complex video stream analysis, and other applications. Built-in a variety of powerful embedded hardware engines, support 8K@60fps H.265 and VP9 decoders, 8K@30fps H.264 decoders and 4K@60fps AV1 decoders; support 8K@30fps H.264 and H.265 encoder, high-quality JPEG encoder/decoder, dedicated image pre-processor and post-processor.

RK3588 also introduces a new generation of fully hardware-based ISP (Image Signal Processor) with a maximum of 48 million pixels, implementing many algorithm accelerators, such as HDR, 3A, LSC, 3DNR, 2DNR, sharpening, dehaze, fisheye correction, gamma Correction, etc., have a wide range of applications in graphics post-processing. RK3588 integrates Rockchip's new generation NPU, which can support INT4/INT8/INT16/FP16 hybrid computing. Its strong compatibility can easily convert network models based on a series of frameworks such as TensorFlow / MXNet / PyTorch / Caffe. RK3588 has a high-performance 4-channel external memory interface (LPDDR4/LPDDR4X/LPDDR5), capable of supporting demanding memory bandwidth.

RK3588 Block Diagram

Advantages of RK3588?

Computing: RK3588 integrates quad-core Cortex-A76 and quad-core Cortex-A55, G610 MP4 graphics processor, and a separate NEON coprocessor. Integrating the third-generation NPU self-developed by Rockchip, computing power 6TOPS, which can meet the computing power requirements of most artificial intelligence models.

Vision: support multi-camera input, ISP3.0, high-quality audio;

Display: support multi-screen display, 8K high-quality, 3D display, etc.;

Video processing: support 8k video and multiple 4k codecs;

Communication: support multiple high-speed interfaces such as PCIe2.0 and PCIe3.0, USB3.0, and Gigabit Ethernet;

Operating system: Android 12 is supported. Linux and Ubuntu will be developed in succession;

FET3588-C SoM based on Rockchip RK3588

Forlinx FET3588-C SoM inherits all advantages of RK3588. The following introduces it from structure and hardware design.

1. Structure:

The SoM size is 50mm x 68mm, smaller than most RK3588 SoMs on market;

100pin ultra-thin connector is used to connect SoM and carrier board. The combined height of connectors is 1.5mm, which greatly reduces the thickness of SoM; four mounting holes with a diameter of 2.2mm are reserved at the four corners of SoM. The product is used in a vibration environment can install fixing screws to improve the reliability of product connections.

2. Hardware Design:

FET3568-C SoM uses 12V power supply. A higher power supply voltage can increase the upper limit of power supply and reduce line loss. Ensure that the Forlinx’s SoM can run stably for a long time at full load. The power supply adopts RK single PMIC solution, which supports dynamic frequency modulation.

FET3568-C SoM uses 4 pieces of 100pin connectors, with a total of 400 pins; all the functions that can be extracted from processor are all extracted, and ground loop pins of high-speed signal are sufficient, and power supply and loop pins are sufficient to ensure signal integrity and power integrity.

The default memory configuration of FET3568-C SoM supports 4GB/8GB (up to 32GB) LPDDR4/LPDDR4X-4266; default storage configuration supports 32GB/64GB (larger storage is optional) eMMC; Each interface signal and power supply of SoM and carrier board have been strictly tested to ensure that the signal quality is good and the power wave is within specified range.

PCB layout: Forlinx uses top layer-GND-POWER-bottom layer to ensure the continuity and stability of signals.

RK3588 SoM hardware design Guide

FET3588-C SoM has integrated power supply and storage circuit in a small module. The required external circuit is very simple. A minimal system only needs power supply and startup configuration to run, as shown in the figure below:

The minimum system includes SoM power supply, system flashing circuit, and debugging serial port circuit. The minimum system schematic diagram can be found in "OK3588-C_Hardware Manual". However, in general, it is recommended to connect some external devices, such as debugging serial port, otherwise user cannot judge whether system is started. After completing these, on this basis, add the functions required by user according to default interface definition of RK3588 SoM provided by Forlinx.

RK3588 Carrier Board Hardware Design Guide

The interface resources derived from Forlinx embedded OK3588-C development board are very rich, which provides great convenience for customers' development and testing. Moreover, OK3588-C development board has passed rigorous tests and can provide stable performance support for customers' high-end applications.

In order to facilitate user's secondary development, Forlinx provides RK3588 hardware design guidelines to annotate the problems that may be encountered during design process of RK3588. We want to help users make the research and development process simpler and more efficient, and make customers' products smarter and more stable. Due to the large amount of content, only a few guidelines for interface design are listed here. For details, you can contact us online to obtain "OK3588-C_Hardware Manual" (Click to Inquiry)

[nakshtechnology]

SINAMICS V90: Future-Proofing Your Automation System

Automation systems are central to achieving heightened efficiency, precision, and scalability across various sectors. However, as  important as these systems are, they face significant challenges—complex installation processes, integration issues with existing technologies, and a constant need for upgrades to handle evolving industrial demands.  

A good example of this technological breakthrough is the Siemens SINAMICS V90 servo drive system, which provides a reliable solution suited to modern industrial requirements. This article explores how the SINAMICS V90 not only enhances current operational capabilities but also ensures businesses are equipped for future challenges, setting a new standard in automation excellence. 

What is SINAMICS V90?

The SINAMICS V90 is a highly optimized servo drive system designed to meet the versatile demands of motion control applications. This system, comprising the Siemens V90 servo drive and the SIMOTICS S-1FL6 servo motor, is engineered for a wide range of applications, making it a cost-effective solution that enhances the competitive edge of businesses by reducing time-to-market. 

Performance: With features like a 1 MHz pulse train setpoint and 20-bit encoder resolution, the system achieves high positioning accuracy, essential for precision-driven processes. The drive and motor offer a 300% overload capacity, which, along with fast acceleration and braking capabilities, significantly boosts productivity.

Design: The robust design of the Siemens V90 includes PCB coating and high-quality bearings, enhancing the system's reliability even in harsh environmental conditions. Integrated safety functions like STO (Safe Torque Off) provide additional security, preventing unexpected motor movement and ensuring the safety of both machinery and operators. 

Ease of Use: Commissioning the SINAMICS V90 is straightforward, thanks to the SINAMICS V-Assistant, a standalone graphic configuration software that simplifies setting parameters, jogging, troubleshooting, and monitoring. This user-friendly approach ensures quick setup and minimal downtime.

SINAMICS V90 Servo Drive Capabilities 

The V90 servo drive system, designed for optimal performance and easy operation, includes a range of features tailored for efficient automation. Below is a table highlighting key attributes and capabilities of the system: 

Feature

Description

Power Range

0.05 to 7.0 kW, accommodating both single and three-phase networks.

Motor Compatibility

Specifically paired with SIMOTICS S-1FL6 servo motors for enhanced performance.

Communication Interfaces

Multiple options including PTI, PROFINET, USS, or Modbus RTU for versatile integration.

Drive Sizes

Available in eight converter frame sizes and seven motor shaft heights to suit various applications.

Cooling

Designed to operate without external cooling; heat dissipation through the motor surface.

Installation

Features quick-release connectors for fast and straightforward installation.

Overload Capability

Capable of handling a threefold overload, ensuring robust operation under demanding conditions.

Commissioning

Plug-and-play setup with minimal configuration needed for quick commissioning.

Control Compatibility

Integrates seamlessly with Siemens SIMATIC PLC control systems for streamlined automation.

Application Across Industries 

The Siemens V90 is suitable for diverse applications such as pick & place, labeling, horizontal packaging, and printing. Its ability to manage both simple and complex motion control tasks makes it a preferred choice for industries looking for a reliable and efficient automation solution. 

Coupled with the SIMOTICS S-1FL6 servo motor, the V90 servo drive system showcases its flexibility and efficiency across a broad spectrum of industries. 

Manufacturing and Production Control In the manufacturing sector, the Siemens V90 drive system is frequently utilized for precise position and speed control, essential for assembly lines and automated production processes. The integration with SIMATIC S7-1200 and S7-1500 PLCs via PROFINET enhances its functionality, allowing for seamless communication and synchronization of complex manufacturing operations​. 

Packaging and Assembly: For industries focused on packaging and assembly, the SINAMICS V90 motor provides reliable solutions for conveyor systems and automated assembly lines. The drive's ability to perform with high dynamic responses ensures that operations are not only fast but also accurate, which is crucial for maintaining throughput and reducing downtime.

Robotics and CNC Machines: The adaptability of the V90 extends to robotics and computer numerical control (CNC) machining. Here, the drive system excels in applications requiring complex motion sequences and high precision, such as in robotic arm positioning and CNC machining centers.

Material Handling: The v90 also finds its application in material handling systems, where smooth and controlled motion is necessary. Its robust design supports the demands of applications like cranes and lifting equipment, providing the necessary control to handle materials safely and efficiently. 

Textile and Woodworking: These industries require precise control for processes like weaving, cutting, and engraving. The V90's ability to handle complex motion sequences makes it a valuable asset, improving productivity and product quality.

Benefits of the SINAMICS V90 

The SINAMICS V90 servo drive system, integral to Siemens' SINAMICS product line, delivers notable advantages across a range of industrial applications. Here are some key benefits detailed through real-world use cases and statistical data:

Energy Efficiency and Cost Savings: The Siemens v90 motor is designed to optimize energy use, particularly in applications like pumps, fans, and compressors. By transitioning from mechanical control systems to variable-speed drives, the V90 significantly reduces power consumption, especially under partial load conditions. This shift can result in up to 70% savings on energy costs, making a substantial economic impact for businesses focused on sustainability and efficiency.

Scalability and Flexibility: With a broad spectrum of power ratings (0.05 to 7.0 kW) and the ability to operate across single and three-phase networks, the Siemens V90 offers remarkable scalability. This flexibility is further enhanced by its compatibility with various communication interfaces such as PTI, PROFINET, USS, and Modbus RTU, allowing seamless integration into existing automation systems.

Operational Efficiency: The SINAMICS V90 system is known for its quick commissioning features and high reliability, which significantly reduce downtime and maintenance costs. The drive system is not only easy to install but also ensures continuous, trouble-free operation across diverse environmental conditions.

Diverse Industrial Applications: From manufacturing and robotics to packaging and material handling, the Siemens V90 motor proves its versatility. For example, in manufacturing, it facilitates precise control over machinery, enhancing product quality and production rates. In material handling, it provides the necessary control to manage operations smoothly and safely.

Integration in Automation Systems: As part of Siemens' Totally Integrated Automation (TIA) philosophy, the v90 drive system works cohesively within a larger automation framework. This integration capability allows for centralized control and management of various drive tasks, streamlining operations and reducing complexity.

Conclusion: Your Next Steps with Naksh Technology

Naksh Technology Solutions LLP is committed to driving innovation and efficiency in automation through the SINAMICS V90 and its comprehensive suite of automation solutions. As industries evolve, partnering with a leader like Naksh ensures that your automation systems are not only up to date but also future-proof. For more information or to schedule a consultation, explore our website and discover how we can make a significant impact on your operational success.

[shopyvision01]

Essential Mobile Accessories and Devices: Apple Charger Cables, Jio Phones, and Samsung Guru Music

In today’s fast-paced world, mobile phones and their accessories have become essential for staying connected and enhancing our daily lives. From smartphones to feature phones, the right accessories can make all the difference in terms of functionality, convenience, and longevity of your device. This blog will explore popular mobile accessories and devices such as the Apple charger cable, Apple lightning cable, Jio Phone 2, Jio phone keypads, and the reliable Samsung Guru Music series, all of which cater to various needs and preferences.

The Importance of High-Quality Charging Cables: Apple Charger Cable and Lightning Cable

One of the most critical accessories for any mobile device is the charger cable. For Apple users, the Apple charger cable and Apple lightning cable are indispensable. These cables are designed to not only charge your device but also to facilitate data transfer between your iPhone, iPad, or iPod and other devices like laptops and desktop computers.

What Makes the Apple Lightning Cable Unique?

The Apple lightning cable is the proprietary connector developed by Apple, introduced in 2012. It is used in almost all of Apple's portable devices, including iPhones, iPads, and some iPods. Here are some of the reasons why the Apple lightning cable stands out:

Compact Design: Unlike older connectors, the lightning cable is compact and reversible, which means you can plug it in any direction, making it user-friendly.

High-Speed Data Transfer: The lightning cable supports fast data transfer, allowing users to sync their devices with computers quickly.

Durable Build: Apple lightning cables are known for their durability. While there are third-party alternatives, many users prefer the original Apple charger cable for its superior quality and longer lifespan.

Compatibility with Apple Ecosystem: If you own multiple Apple devices, the lightning cable can be used across your iPhones, iPads, and even some older models of iPods, making it a versatile accessory.

However, like any accessory, the Apple lightning cable can be prone to wear and tear. It’s crucial to handle it with care and avoid pulling it from the cord, which can lead to damage. Opting for a high-quality, original Apple charger cable ensures you won’t have to replace it frequently.

Jio Phone 2: Revolutionizing Affordable Mobile Communication

Moving from accessories to feature phones, the Jio Phone 2 has revolutionized the mobile phone market in India by offering a combination of affordability and smart features. Launched by Reliance Jio, the Jio Phone 2 is an upgraded version of the original Jio Phone, offering several new features and improvements that make it a popular choice for users looking for a budget-friendly option with essential smartphone functionalities.

Key Features of Jio Phone 2

QWERTY Keypad: One of the most notable upgrades in the Jio Phone 2 is the inclusion of a QWERTY keypad. This makes typing and navigating much easier, especially for users accustomed to smartphones but who still prefer physical keypads.

4G Connectivity: The Jio Phone 2 offers 4G VoLTE support, ensuring fast internet browsing, video calling, and smooth streaming on popular apps like YouTube and Facebook.

KaiOS: The phone operates on KaiOS, which allows users to access popular apps like WhatsApp, YouTube, and Google Maps, giving the feel of a basic smartphone at a much lower price.

Dual SIM Support: Unlike its predecessor, the Jio Phone 2 offers dual SIM support, making it convenient for users who need to manage personal and professional contacts on the same device.

Affordable Price: Perhaps the most attractive feature of the Jio Phone 2 is its price. For users looking for an affordable yet functional mobile device, this phone is hard to beat.

Jio Phones Keypad: Classic and Convenient

While smartphones dominate the market, feature phones like Jio Phones still maintain a loyal user base due to their simplicity and convenience. The Jio phones keypad is a key reason why many users opt for this device. Unlike touchscreen phones, a physical keypad provides tactile feedback, making it easier for some users, especially the elderly or those unfamiliar with smartphones, to operate their phones efficiently.

Benefits of Jio Phone Keypads

Tactile Feedback: The physical Jio phones keypad offers a satisfying tactile response, ensuring you know when you've pressed a button, reducing the chances of mistyping.

Durability: Keypad phones are often more durable than touchscreens. They are less prone to screen damage from drops, making them a reliable option for rough use.

Extended Battery Life: Since feature phones like Jio Phones don’t rely on power-hungry touchscreens, they often have longer battery life, making them ideal for users who need their phones to last longer between charges.

Ease of Use: For users who prefer simplicity, the keypad offers straightforward navigation without the complexities of touch gestures and multitasking found in smartphones.

Samsung Guru Music: The Go-To Feature Phone for Music Lovers

In a market dominated by smartphones, Samsung’s Guru Music series stands out as a reliable, budget-friendly feature phone that caters to music lovers. The Samsung Guru Music is a perfect choice for those who prioritize battery life and basic functionalities over advanced features.

Why Choose the Samsung Guru Music?

Long Battery Life: One of the most appealing features of the Samsung Guru Music phone is its impressive battery life. The phone is equipped with a long-lasting battery that can easily last several days on a single charge, even with regular use.

FM Radio and MP3 Support: As the name suggests, the Samsung Guru Music is designed for music lovers. It comes with FM radio support and the ability to play MP3 files, allowing users to listen to their favorite tunes on the go.

Lightweight and Portable: The phone's compact design makes it easy to carry around, and its lightweight build ensures it doesn’t feel cumbersome in your pocket or bag.

Affordable Pricing: Like the Jio Phone, the Samsung Guru Music is priced to suit budget-conscious consumers who still want a reliable phone for calls, messages, and music.

Durability: Feature phones like the Samsung Guru Music are known for their durability. With fewer complex components than smartphones, they are less prone to damage and last longer with minimal maintenance.

Conclusion

In a world where technology evolves rapidly, mobile devices and accessories like the Apple charger cable, Apple lightning cable, Jio Phone 2, Jio phones keypad, and Samsung Guru Music provide versatile and budget-friendly options for a variety of users. Whether you are looking for high-quality charging accessories for your Apple devices or seeking reliable, feature-packed phones like the Jio Phone 2 and Samsung Guru Music, these products offer functionality, convenience, and value.

For those who prefer the simplicity of feature phones or need a budget-friendly backup device, the Jio Phone 2 and Samsung Guru Music provide excellent choices. Meanwhile, Apple users can enjoy the reliability of the Apple charger cable and lightning cable, ensuring their devices are always charged and ready to go.

As technology continues to advance, these mobile accessories and devices will remain essential tools, helping us stay connected, entertained, and productive in our daily lives. Whether you’re a tech-savvy user or someone who prefers simplicity, the right combination of devices and accessories can enhance your mobile experience.

[kovaionconsulting]

How Angular and Low-Code Platforms Simplify Mobile App Development

In today’s fast-paced world of mobile app development, speed and efficiency are key to staying competitive. The rise of low-code platforms and Angular has transformed how applications are built, offering developers and businesses powerful tools to streamline the process and deliver results faster. In this blog, we’ll explore how combining Angular with low-code platforms simplifies mobile app development while maintaining high performance and flexibility.

The Benefits of Angular for Mobile App Development

Angular, a popular framework developed by Google, has become a top choice for building modern mobile and web applications. Here’s why it stands out in mobile app development:

1. Component-Based Architecture

Angular’s component-based architecture allows developers to build apps with reusable modules, simplifying app creation and maintenance. This modular approach makes it easy to manage and update various components without affecting the entire application, which speeds up development and reduces bugs.

2. Cross-Platform Development

With Angular, you can build Progressive Web Apps (PWAs) that work seamlessly across platforms like Android and iOS. This eliminates the need for separate codebases for each platform, drastically cutting down development time and allowing developers to focus on delivering an exceptional user experience.

3. Rich Ecosystem and Tools

Angular’s extensive ecosystem includes a powerful Command Line Interface (CLI) that automates development tasks. Combined with TypeScript, which enhances code quality with static typing, Angular ensures smooth and error-free development. The framework also benefits from a strong community and comprehensive documentation, making it easier for developers to find solutions and best practices.

4. Enhanced Performance

Angular’s Ahead-of-Time (AOT) compilation speeds up app performance by compiling the code during the build process, resulting in faster load times. This performance boost is critical for mobile apps, where user experience hinges on speed and responsiveness.

The Advantages of Low-Code Platforms in Mobile App Development

Low-code platforms are revolutionizing mobile app development by providing tools that allow users to create applications with minimal coding knowledge. Here’s how they bring value:

1. Accelerated Development

Low-code platforms offer a visual development environment with drag-and-drop functionality, enabling rapid app creation. Developers can customize features quickly and deploy apps faster, significantly reducing time-to-market. For more insight into how low-code platforms enable rapid app creation, check out our blog on how to Build an Enterprise App Without Coding.

2. Cost Savings

By minimizing the need for extensive coding and large development teams, low-code platforms reduce the overall cost of mobile app development. Companies can allocate resources more efficiently, focusing on enhancing user experience rather than managing lengthy development cycles.

3. Seamless Integration

Low-code platforms come with built-in connectors and tools that make it easy to integrate apps with existing systems, databases, and third-party services. This ensures your mobile app connects effortlessly with other business applications. Read more on how these platforms integrate with existing systems in The Rise of AI-Powered Low-Code Platforms for Innovation.

4. Empowering Non-Technical Users

Low-code platforms empower non-technical users, such as business analysts or project managers, to contribute to the development process. By allowing stakeholders to participate, businesses can ensure that the final product aligns more closely with business needs. Find out how low-code platforms allow greater collaboration and reduce technical barriers in our blog, How Low-Code is Revolutionizing SaaS.

How Angular and Low-Code Platforms Complement Each Other

When Angular is combined with low-code platforms, the result is a powerful synergy that transforms how mobile apps are developed. Here’s how they complement each other:

1. Customization and Flexibility

Low-code platforms provide a foundation with pre-built components, but customization can be limited. With Angular, developers can extend these components, adding advanced functionalities and unique features that meet specific business requirements.

2. Optimized Performance

The performance enhancements of Angular, like AOT compilation and efficient change detection, ensure that apps built on low-code platforms perform at optimal levels. This leads to high-quality, responsive mobile apps that deliver a smooth user experience. Discover how Angular’s performance capabilities enhance low-code platforms in our blog, The Future of App Development with Low-Code and Angular.

3. Efficient Prototyping and Iteration

Low-code platforms enable rapid prototyping, allowing businesses to quickly visualize and test their mobile apps. By integrating Angular, developers can further refine and customize the app, leading to faster iterations and improvements based on user feedback.

4. Scalability and Maintainability

Angular’s modular approach and strong tooling ensure that mobile apps remain scalable and maintainable over time. Paired with low-code platforms, this provides businesses with a sustainable solution to manage growing user demands and complex functionalities. Explore more on how low-code platforms ensure scalability and efficiency in our article, Top Low-Code Platforms for Web App Development.

Conclusion

Angular and low-code platforms offer a winning combination for simplifying mobile app development. Angular’s powerful features and flexibility, coupled with the speed and accessibility of low-code platforms, provide a comprehensive solution for building high-quality mobile applications efficiently.

By leveraging the strengths of both Angular and low-code platforms, developers and businesses can streamline their app development processes, reduce costs, and deliver exceptional mobile experiences.

Kovaion’s low-code platform is at the forefront of this innovation, offering a robust solution that integrates seamlessly with Angular to help you build and deploy mobile apps with ease. Embrace the future of app development with these cutting-edge technologies and stay ahead in the competitive landscape.

[engineoilcompany]

Expert Tips for Selecting the Ideal Grease for Your Machinery

One of the major precautions regarding machinery maintenance is lubrication. Grease as a lubricant has an important role in lessening friction from jolts and reducing wear and tear in equipment to ensure any type of equipment would last longer than expected. But with many grease types in the market, making a selection may pose much more difficulty. Ensuring to select the best grease means being able to give top-notch performance and longevity to your equipment. Following are a few expert tips to select the perfect grease for your machinery.

1. Know What Grease Lubricants Do

It is important to understand the role of grease lubricants in machines. Grease acts as a barrier between the moving parts in contact, thus reducing friction and wear. It provides a seal to prevent intrusion from dirt, dust, or water. The best grease will accord your machine the most flow in its operation, thus enhancing its efficiency through reduced chances of malfunction. Besides, the lubricants of grease provide huge resistance to environmental factors like changes in temperature and resistance toward chemical contact, which is appropriate for industrial use.

2. Types of Grease Lubricants

Understanding the different types of grease is important in choosing the most suitable type for use in your machines. Generally, grease lubricants are classified based on the thickener, base oil, and additives that make them up. The following are some of the most common types:

Lithium Grease: This is one of the most-used greases and offers good multi-purpose performance, not only at a wide temperature range but also for stability, water resistance, and durability, making it ideal in automotive and general machinery applications.

Calcium Grease: Calcium-based grease enjoys very good water resistance and is suitable for marine equipment and applications entailing high moisture exposure. Calcium-based greases tend to have a limited operating temperature range and are not normally used in high-temperature applications.

Aluminum Complex Grease: This kind of grease has very, very good temperature resistance and excellent oxidation stability, thus being ideal for use in severe applications. It is also good for water resistance and can be applied to both automotive and industrial applications.

Polyurea Grease: Polyurea-based greases typically have long-lasting performance under difficult conditions such as high temperatures; hence, they apply in sealed-for-life bearings, electric motors, and high-speed applications.

Silicone Grease: It is waterproof, chemical-resistant, and withstands a wide range of temperatures; hence, it is quite suitable in special applications such as electrical connectors, seals, and even medical devices.

Each of them has different features, and their use depends on matching the right type of grease to the particular needs of your machinery.

3. Operating Conditions

The operating conditions in the area where your machinery works form the basis on which the correct grease will be selected. Consider environmental exposure, along with temperature, speed and load, among other factors. For example:

Temperature: The machinery which operates under high temperatures requires greases that will not break down in maintaining consistency and performance. Generally, aluminium complexes or polyurea greases usually work great with applications involving high temperatures.

Speed: The requirement for greases is to have low viscosity to reduce friction so that high-speed machinery can operate smoothly. Lighter base oils are used in greases in most high-speed applications, such as lithium-based grease.

Load: Those under high load conditions will have requirements to apply greases with extreme pressure additives that prevent wear and tear. Aluminium complex and polyurea greases are the normally applied ones in those situations.

Environment: Other environmental factors affecting the performance of greases are water, dust, and chemicals. Calcium and silicone greases have better water resistance, while polyurea and aluminium complex greases are resistant to chemicals.

4. Additives in Grease

Most greases carry additives to improve performance. Such additives may allow the grease to operate in more extreme conditions of temperature, pressure, etc., and may provide additional protection to machinery. Common additives are:

Anti-Wear Additives: Anti-wear additives decrease wear on contacting surfaces of machinery components under heavy load.

Oxidation Inhibitors: Greases with oxidation inhibitors prevent the thickener and base oil from breaking down, hence prolonging the life of the lubricant.

Rust and Corrosion Inhibitors: For machinery that could be subjected to moisture or being in heavy environmental conditions, rust and corrosion inhibitors prove quite important in protecting metal surfaces.

Extreme Pressure (EP) Additives: These are necessary where machinery is under heavy loads; the additives form a film of protection that would ensure no surface damage occurs under pressure.

5. Consistency and Viscosity of the Grease

The consistency and viscosity of the grease are other factors in selecting the proper product. The consistency of grease is measured by a scale proposed by the National Lubricating Grease Institute, and the rating varies from 000-colloquially speaking, very fluid-up to 6-very hard. For most industrial and automotive applications, NLGI 2 grease is normally used because its consistency gives a very good balance that performs satisfactorily under most conditions.

The viscosity of the base oil in the grease will affect its flow characteristics in applications, which in turn will determine the extent of friction reduction between moving parts. High-speed machinery applications call for a lower-viscosity grease, while applications with low operating speeds or carrying high loads should be treated with thicker greases with higher viscosity to provide the needed protection.

6. Compatibility with Seals and Materials

Incompatible grease degrades the seals and further causes leaks and equipment failure. Always check the manufacturer's guidelines to determine the type of grease that can be safely used with your equipment.

7. Application Method

Application method will also have a bearing on which type of grease you use. Some greases are only compatible with automatic lubrication systems, while others may be better suited for use in manual applications. Be sure the grease you decide on is compatible and can be readily applied via a grease gun, automated system or by hand.

8. Lubrication Frequency

Consider the greasing frequency of the machinery. For instance, some greases have longer service intervals, such as polyurea and silicone greases that may seldom need replacement. On the other hand, extremely severe conditions that affect the machinery may require more frequency of lubrication.

You may also like: Points To Keep In Mind For Choosing Royal Enfield Engine Oil

Conclusion

The right type of grease for the machinery will save it and give it a long life. Knowing the variants of grease lubricants, considering the operating conditions, and getting the right additives will help in smooth functioning and increased efficiency. Always consult your machinery manufacturer's recommendations and take expert advice to select an ideal grease which would meet all the specific demands of your equipment.

[tritonmarketresearchamey]

High-Speed Connector Market: Transforming Networks & Connectivity

The demand for digital services, and consequently data transmission, has witnessed explosive growth. As per IEA, since 2010, global internet traffic has expanded twenty-five-fold. This surge underpins the escalating need for high speed cable connectors, crucial for efficient data handling and transmission across various sectors. This growth is a direct response to the increasing need for robust connectivity solutions that can keep pace with the exponential growth of data generation and transmission. According to our report, the Global High Speed Connector Market is expected to grow significantly, driven by a CAGR of over 9.15% over 2024-2032.

High speed connectors also address compatibility issues with legacy systems, providing seamless integration that is essential for modernizing existing technology infrastructures. This capability is not only enhancing operational efficiencies but is also projected to boost market growth substantially in the near future.

Explore in detail about this market in our FREE sample

High Speed Connector Market: Spotlight on Key Products

Board-to-Cable Connectors

Among the various products, board-to-cable connectors witness significant traction due to their critical role in ensuring continuous and reliable connectivity in complex electronic assemblies. These connectors are particularly favored for their flexibility and durability, which are essential for applications involving frequent disconnection and reconnection.

Latest developments in board-to-cable connectors have showcased several innovations, particularly in terms of performance and application adaptability. Notably, in October 2023, Molex introduced the KickStart Connector System that combines low transmission loss and a compact design, making it the first Open Compute Project (OCP)-compliant solution of its kind.

Board-to-Board Connectors

Board-to-board connectors are also gaining prominence as they are vital for creating secure and efficient connections between printed circuit boards (PCBs) within a single device. This is increasingly important in compact electronic devices such as smartphones and tablets.

New innovations in board-to-board connectors have been noteworthy. For instance, in Market 2023, Hirose Electric introduced the IT14 Series, designed for telecommunications, supporting high-speed data transmission up to 112Gbps using PAM4 technology.

In the field of advanced automotive, board-to-board connectors play a crucial role. These connectors are essential for connecting multiple electronic control units (ECUs) within vehicles, which are central to the functionality of ADAS.

Connect with our experts for a simplified analysis!

USB Type-C: A Catalyst for High Speed Connector Evolution

The adoption of USB Type-C connectors has been a game-changer in the field of high-speed connectivity. Known for their reversibility and high-speed data transfer capabilities, USB Type-C connectors are becoming a standard in new devices, fueling further development and innovation in the high-speed connector market. Their versatility across various platforms and devices underscores the shift towards more universal, efficient connection solutions in technology hardware.

Trends and Investment Opportunities Ahead

Advancements in the high-speed connector market are focused on enhancing connector design to reduce electromagnetic interference and improve signal integrity. Innovations such as connectors supporting up to 400 Gbps are transforming data center operations with faster, more reliable cloud services.

Looking ahead, further developments are expected in nanotechnology and advanced materials science, promising more efficient connectivity solutions. This makes sectors like cloud computing and artificial intelligence particularly ripe for investment. Hence, monitoring these technological shifts is essential for businesses and investors to invest in high speed cable connect solutions.

Explore Our Latest Release for the 2024-2032 Market Analysis

 

FAQs

Q1) What advantages do high-speed connectors provide over traditional connectors?

High-speed connectors offer superior performance in terms of data transmission speed and reliability, which is critical for modern digital applications.

Q2) Can high-speed connectors be used with any device?

While high-speed connectors are versatile, compatibility with specific devices depends on the connector type and device specifications.

Q3) What are the future trends in the high-speed connector market?

Future trends include the development of connectors with higher speed capacities, enhanced durability, and improved EMI resistance, all crucial for the next generation of digital devices.

[businessindustry]

Asia Pacific USB Cable Market Demand, Industry Market, Growth, Size, Report by 2024 to 2032

The Reports and Insights, a leading market research company, has recently releases report titled “Asia Pacific USB Cable Market: Industry Trends, Share, Size, Growth, Opportunity and Forecast 2024-2032.” The study provides a detailed analysis of the industry, including the Asia Pacific USB Cable Market share, size, trends, and growth forecasts. The report also includes competitor and regional analysis and highlights the latest advancements in the market.

Report Highlights:

How big is the Asia Pacific USB Cable Market?

The Asia Pacific USB cable market was valued at US$ 5.7 Billion in 2023 and is expected to register a CAGR of 15.6% over the forecast period and reach US$ 21.01 Bn in 2032.

What are Asia Pacific USB Cable?                                                                                                                                                                            

A USB cable is a common interface used for both data transfer and power delivery between devices like computers, smartphones, and peripherals such as printers or external drives. It provides a universal solution for connecting different types of devices, eliminating the need for multiple ports and connectors. USB cables are available in various types, including USB-A, USB-B, and the increasingly popular USB-C, which offers faster data transfer and improved charging efficiency. USB-C, in particular, has become the standard for many modern devices due to its enhanced performance and versatility.

Request for a sample copy with detail analysis: https://www.reportsandinsights.com/sample-request/2435

What are the growth prospects and trends in the Asia Pacific USB Cable industry?

The Asia Pacific USB cable market growth is driven by various factors and trends. The USB cable market in the Asia Pacific region is witnessing significant growth, fueled by the rising demand for electronics such as smartphones, laptops, and tablets. The increasing use of USB Type-C cables, known for their high-speed data transfer and fast charging capabilities, is accelerating this trend. The expanding digital landscape and the surge in IoT devices have heightened the need for dependable connectivity solutions. Additionally, the region's strong manufacturing base and technological advancements are supporting the development of more efficient USB cables, with countries like China, Japan, and India playing pivotal roles in the market's growth. Hence, all these factors contribute to Asia Pacific USB cable market growth.

What is included in market segmentation?

The report has segmented the market into the following categories:

By Type

USB-A

USB-B

USB-C

Mini-USB

Micro-USB

By USB Version

USB 1.0

USB 2.0

USB 3.0/3.1/3.2

USB 4.0

By Length

Up to 1M

1-3M

3-5M

By Application

Consumer Electronics

Industrial Equipment

Medical Devices

Others

By End-User

Individual Consumers

Business and Enterprises

Original Equipment Manufacturers

Who are the key players operating in the industry?

The report covers the major market players including:

Promate

Infineon Technologies AG

Anker

ERD Technologies Private Limited

Ambrane

C.I. Cables

Bluesmart technologies

BMA technologies Ltd

View Full Report: https://www.reportsandinsights.com/report/Asia Pacific USB Cable-market

If you require any specific information that is not covered currently within the scope of the report, we will provide the same as a part of the customization.

About Us:

Reports and Insights consistently mееt international benchmarks in the market research industry and maintain a kееn focus on providing only the highest quality of reports and analysis outlooks across markets, industries, domains, sectors, and verticals. We have bееn catering to varying market nееds and do not compromise on quality and research efforts in our objective to deliver only the very best to our clients.

Our offerings include comprehensive market intelligence in the form of research reports, production cost reports, feasibility studies, and consulting services. Our team, which includes experienced researchers and analysts from various industries, is dedicated to providing high-quality data and insights to our clientele, ranging from small and medium businesses to Fortune 1000 corporations.

Contact Us:

Reports and Insights Business Research Pvt. Ltd. 1820 Avenue M, Brooklyn, NY, 11230, United States Contact No: +1-(347)-748-1518 Email: sales@reportsandinsights.com Website: https://www.reportsandinsights.com/ Follow us on LinkedIn: https://www.linkedin.com/company/report-and-insights/ Follow us on twitter: https://twitter.com/ReportsandInsi1

[suntelecomcn]

MTP/MPO Fiber Optic Cable: Types and Their Applications

With ever-greater bandwidths and network connections to deal with in data centers, traditional duplex fiber patch cords like LC fiber patch cords no longer meet the demands. To solve this issue, MTP/MPO fiber optic cable that houses more fibers in a multi-fiber MTP/MPO connector was introduced in the market as a practical solution for 40G/100G/400G high-density cabling in data centers. This article will introduce different MTP/MPO cable types and their applications.

What is MTP/MPO Cable?

MPO (multi-fiber push-on) is the first generation of clip-clamping multi-core fiber optic connectors. MTP is an advanced version of MPO with the better mechanical and optical performance. They look similar and are fully compatible and interchangeable.

MTP/MPO cable consists of MTP/MPO connector and optical fiber. MTP/MPO connector has a female type (without pins) or a male type (with pins). MTP/MPO connector increases the fiber optic cable density and saves circuit card and rack space, which is well suited for current data center cabling and future network speed upgrades.

MTP/MPO Cable Types

MTP/MPO cable types are classified based on function, polarity, fiber count, fiber mode, and jacket rating.

By Function

Based on function, MPO/MTP cable type is divided into MTP/MPO trunk cable, MTP/MPO breakout cable, and MTP/MPO conversion cable.

MTP/MPO Trunk Cable

MTP/MPO trunk cable is terminated with an MTP/MPO connector (female/male) on both ends, which is available in 8-144 fiber counts for users’ choices. Typically, MTP/MPO trunk cable is ideal for creating a structured cabling system, including backbone and horizontal interconnections such as 40G-40G and 100G-100G direct connections.

2.MTP/MPO Breakout Cable

MTP/MPO breakout cable (aka. harness cable or fanout cable) is terminated with a female/male MTP/MPO connector on one end and 4/6/8/12 duplex LC/FC/SC/ST connectors on the other end, such as 8-fiber MTP/MPO to 4 LC harness cables and 12-fiber MTP/MPO to 6 LC harness cables.  Typically, MTP/MPO breakout cable is ideal for short-range 10G-40G and 25G-100G direct connections or for connecting backbone assemblies to a rack system in the high-density backbone cabling.

3.MTP/MPO Conversion Cable

MTP/MPO conversion cable has the same fanout design as MTP/MPO breakout cable but is different in fiber counts and types. MTP/MPO conversion cable is terminated with MTP/MPO connectors on both ends.  MTP/MPO conversion cable is available in 24-fiber to 2×12-fiber, 24-fiber to 3×8-fiber, and 2×12-fiber to 3×8-fiber types, and is ideal for 10G-40G, 40G-40G, 40G-100G, and 40G-120G connections, which eliminate fiber wasting and largely increase the flexibility of the MTP/MPO cabling system.

By Polarity

Polarity refers to the difference between the optical transmitters and receivers at both ends of the fiber link. Due to the special design of MTP/MPO connectors, polarity issues must be addressed in high-density MTP/MPO cabling systems. To guarantee the correct polarity of the optical path, the TIA 568 standard defines three connection methods, called Type A, Type B, and Type C. The cables of the three MTP/MPO connector types have different structures.

By Fiber Count

Based on fiber count, MTP/MPO cable type is divided into 8/12/16/24 fiber. The 8-fiber MTP/MPO cable can transmit the same data rate as 12-fiber, but with lower cost and insertion loss, making it a more cost-effective solution. 12-fiber MTP/MPO cable is the earliest developed and most commonly used solution in 10G-40G and 40G-100G connections. If it is used in 40G QSFP+ or 100G QSFP28 transceivers, 4 fibers will be idle, resulting in low fiber utilization.16-fiber MTP/MPO is designed for 800G QSFP-DD/OSFP DR8 and 800G OSFP XDR8 optics direct connection and supporting 800G transmission for hyperscale data center. 24-fiber fiber MTP/MPO cable is used to establish a 100GBASE-SR10 connection or 400G connection between CFP and CFP transceivers.

By Fiber Mode

Based on fiber mode, MTP/MPO cable includes single-mode (SM) and multi-mode (MM). SM MTP/MPO cable is suitable for long-distance transmissions, such as in metropolitan area networks (MANs) and passive optical networks PONs (PONs), with less modal dispersion, and it is available in OS2 type. While MM MTP/MPO cable is suitable for short-distance transmission, allowing 40 Git/s maximum transmission distance of 100m or 150m, and it is available in OM3/OM4 types.

By Jacket Rating

According to different fire rating requirements, the jackets of MTP/MPO cable types are divided into low smoke zero halogen (LSZH), optical fiber non-conductive plenum (OFNP), communications multipurpose cable plenum (CMP), etc. LSZH MTP/MPO cable is free of halogenated materials (toxic and corrosive during combustion), provides better protection for personnel and equipment in a fire, and is suitable for closed places. OFNP MTP/MPO cable contains no electrically conductive elements and is designed with the highest fire rating, which can be installed in ducts, plenums, and other spaces for building airflow. CMP MTP/MPO cable can restrict flame propagation and smoke exhaust rate during a fire, which is suitable for plenum spaces, where air circulation for heating and air conditioning systems are facilitated.

Conclusion

MTP/MPO cables provide stable transmission, high performance, high-density cabling for various environments, and prevent network bottlenecks, reduce network latency, and expand bandwidth and scalability for future network expansion.  Sun Telecom provides total and customized solutions of fiber optic products to the global market. Contact us if you have any needs.

[vashiislblog]

Ceiling Fans: A Breeze of Fresh Air

As the heat of summer sets in, staying cool at home can feel like heaven.

Luckily, a ceiling fan can be your best ally, it provides a soothing breeze. It helps to beat the heat and keeps your space cool. A ceiling fan is an easy, effective way to create a breeze. It helps you stay comfortable, no matter how high the temperature rises. — it’s a soothing, natural way to keep your home comfortable and cozy.

But do you know how ceiling fans work? Let’s look at how ceiling fans blend beauty with practicality in the simplest way. This article explains how ceiling fans work all year.

What is Ceiling Fan

Components Of Ceiling Fans

Motor : At the ceiling fan’s core, the motor transforms electricity into motion. This vital component drives the blades, propelling air through the room. Its silent conversion of power to spin forms the essence of the fan’s cooling function.

Fan Blades: The fan blades are responsible for moving the air. Their shapes, sizes, and materials vary. These factors can affect airflow and the fan’s look.

Blade Arms (or Brackets) These connectors attach the blades to the motor housing. They ensure the blades are positioned for optimal airflow.

Mounting System: The mounting system attaches the ceiling fan to the ceiling. It includes a downrod for high ceilings or a flush mount for lower ones. Additionally, it has a canopy that covers the hardware.

Capacitor: The capacitor controls the fan’s speed. It boosts the motor to ensure smooth operation.

Control System: Ceiling fans can be controlled via a wall switch, remote control, or pull chain. More modern fans may have smart controls, allowing you to adjust settings using an app.

Ball Bearings: They are in the motor. They reduce friction between moving parts. This helps ensure smooth, quiet operation.

Types Of Ceiling Fans Available in Market

Ceiling fans come in various types and styles to suit different needs and preferences. Here are some common types available in the market:

Standard Ceiling Fans These are the most common and widely used. They come in various sizes and designs and typically feature a pull chain or wall switch for operation.

Low-Profile (or Hugger) Fans Designed for rooms with low ceilings, low-profile fans have a compact design that hugs close to the ceiling. They provide effective airflow without hanging too low.

High-Vaulted Ceiling Fans These fans are designed for rooms with high or sloped ceilings. They often come with a longer downrod to ensure proper airflow and balance.

Dual-Motor Ceiling Fans Featuring two separate motors, these fans allow for dual blades or a dual-blade configuration, offering customizable airflow and enhanced cooling.

Smart Ceiling Fans Equipped with technology that allows for control via smartphone apps, voice assistants (like Alexa or Google Assistant), or remote controls. They often include energy-saving features and programmable settings.

Outdoor Ceiling Fans Designed for use in outdoor spaces like patios and porches, these fans are built with weather-resistant materials to withstand moisture and outdoor conditions.

Industrial Ceiling FansThese heavy-duty fans are used in large industrial spaces, warehouses, or commercial buildings. They are designed to move large volumes of air and are built to be more durable.

Ceiling Fans with Light Kits These fans come with integrated lighting, combining a ceiling fan and light fixture in one unit. They are ideal for adding both cooling and illumination to a room.

Function and Benefits

Air Circulation: Ceiling fans circulate air in a room. This cools it in warm weather and improves heat distribution in cooler months.

Energy Efficiency: They can cut energy bills by using less air conditioning and heating. Using ceiling fans in conjunction with HVAC systems can increase overall energy efficiency.

Comfort: Fans create a breeze that can cool a room. It enhances evaporative cooling on the skin.

Choosing the Right Fan

Room Size: Select a fan size appropriate for the room’s dimensions. Larger rooms may need larger fans or multiple units.

Blade Pitch: The angle of the blades affects airflow. A greater pitch generally results in more air movement.

Style: Match the fan’s design with the room’s decor. Fans come in various styles, from sleek modern designs to traditional or ornate looks.

Features: Also, consider features like remote controls, dimmable lights, and reversible motors. They help for seasonal use.

Choose Your Perfect Fans With Vashi Integrated Solution Your Trusted Partner

Energy Efficiency and Environmental Impact

Efficiency: Ceiling fans use less energy than air conditioners. They can lower utility bills.

Sustainability: Ceiling fans reduce reliance on HVAC systems. This lowers the environmental impact of energy use.

Ceiling fans are versatile appliances that provide both practical and aesthetic benefits. Knowing their parts, types, and upkeep can help you. It can help you choose the right fan and keep it running well for years.

[evc-installs]

Efficient EV Charging With Wallbox Pulsar Plus 

For usage at home, the Wallbox Pulsar Plus is a multipurpose and effective electric car charger. Its many features can be managed via the myWallbox app, and its small size and simple design make it ideal for any garage. Wallbox Pulsar Plus offers high-power charging capabilities that are ideal for regular use. 

Wallbox was established in 2015 by Enric Asunción and Eduard Castaeda in Barcelona, Spain. The aim of developing it was to transform global power use. 

Wallbox creates intelligent charging solutions that combine beautiful design and technology effortlessly. The car and charger communicate with each other via easy-to-use smartphone apps.  

They also have another noteworthy distinction: Wallbox was the first company to advertise during Super Bowl LVI as an EV charging provider! 

Essential Features Of Pulsar Plus  

Here is a list of a few Pulsar Plus features: 

Power: 7.4 kW (a three-phase, 22 kW version is available)  

Small-scale layout  

Voice control: Google Home and Amazon Alexa  

Sharing of Power - enables multiple Pulsar Plus 166 x 163 x 82 mm connections (without cable)  

DC leakage prevention integrated  

Constantly linked with Bluetooth or Wi-Fi, Wallbox App management  

Scheduling Charges  

Speed Of Charging/Power Output  

With the ability to charge Type 1 or Type 2 vehicles at 7.4kW on single-phase electricity and electric cars at 11kW and 22kW on three-phase power, the Wallbox Pulsar Plus is comparable to the quickest chargers currently on the market.  

Moreover, Power Boost is an optional feature that monitors your home's energy use in real-time using a dynamic load and modifies charging rates accordingly. Stated differently, it keeps your charger from overheating and damaging other essential electrical items! 

Type Of Connector  

The Pulsar Plus electric vehicle charging device has to be attached because there isn't an untethered version. For either type 1 or type 2, a 5 m cable is standard, and a 7 m cable is optional. The plastic finish may not be to everyone's taste, but the manufacturing quality is decent. Despite its small size, the charger is still appealing overall in this price range. One benefit of not having an earth rod is that it reduces installation costs and improves the aesthetics of the final result. 

Size 

Pulsar Plus EV home charger is small at just 166 x 163 x 82 mm without the cord! That little stature, meanwhile, has no bearing on performing ability. All you have to do is plug the cable into your electric vehicle to see its present state since it features an inventive LED ring. The myWallbox app controls everything, assuming your planned charging mode is prepared.  

Design  

The Wallbox Pulsar Plus's gloss black front and matte black sides help it blend in, but the LED ring makes it easy to see whether it's charging. The best way to describe the appearance is "polished."  

166 x 163 x 82 mm makes it one of the smallest home chargers on the market. The EO Mini Pro 2, which boasts a thickness of 125mm and was introduced as the "world's smallest smart home charger," is 82mm thicker than the Pulsar Plus. The Wallbox Pulsar Max has added the ability to muffle or turn off the LED ring while charging, making it a very bright night light, even if it is a valuable function.  

Connectivity 

Your home Wi-Fi is required for the Wallbox Pulsar Plus to connect, and the smart features won't work without a strong connection. All W-Fi chargers can potentially have communication problems, but you may also connect to it using Bluetooth.  

Bluetooth ensures that you can always recharge your car if your Wi-Fi fails. When Bluetooth is enabled, the Wallbox Pulsar Plus may be monitored and controlled without a Wi-Fi connection; voice control requires Wi-Fi. 

Voice Command Control 

The Wallbox Voice Assistant integrates with Google Assistant, allowing you to set up a charging schedule, lock or unlock your charger, and begin or finish a charging session. Voice commands may be used to control your charger once they are enabled. The voice control is simple and may be programmed using Google Home or Android. 

Charging 

You can program the Pulsar Plus to charge your EV at predetermined intervals. By choosing this option, you may charge your electric car as cheaply as possible by doing it late at night, when electricity prices are at their lowest. Utilising the Pulsar Plus requires the Wallbox smartphone app. It has a highly user-friendly UI that was designed to be straightforward.   

You may charge and stop from anywhere.  

Keep an eye on your car's charge as it occurs.  

Schedule fees to correspond with less expensive tariffs  

Shut off or turn on the charger.  

Updates automatically  

Available on iOS or Android 

Balancing Of Load 

Connect two or more Pulsar Plus chargers to the same electrical circuit to securely charge numerous EVs simultaneously. Power Boost protects the primary fuse in your 7kW EV charger against overload. It tracks the amount of power you consume and distributes the remaining amount to your vehicle—a technique frequently referred to as dynamic load balancing.  

Measurement is done with a power metre or optional sensor clamp. Turning a gadget on and off in one place? Power Boost automatically adjusts the power to provide the best possible charging experience. Power Boost is crucial for houses with electric showers, heat pumps, or other high-load electrical equipment! 

Conclusion 

Our most compact and powerful smart electric car charger is the Wallbox Pulsar Plus. You can quickly determine when your car is ready to travel or needs charging thanks to its adjustable design, which also changes colour based on the energy level. It can power any EV up to 22 kW and comes with a range of power supply and charging cords.  

The myWallbox app makes home charging easier and lets you use Bluetooth or Wi-Fi to operate your charger from any smart device. In addition to receiving notifications, you may plan tasks, handle charges, and more. You can manage your EV charge with Pulsar Plus and wake up to a fully charged battery daily. 

[govindhtech]

Samsung Galaxy Book4 Edge 15-inch Display Is Now Available

Samsung Galaxy Book4 Edge

Samsung’s Next-Gen AI PC, the Galaxy Book4 Edge 15-inch display, is now available. With the linked Galaxy ecosystem, you can access Galaxy AI capabilities and enjoy all the power of Copilot+ PCs in a lightweight, portable package.

Samsung Electronics introduced the Galaxy Book4 Edge 15-inch, the first Galaxy Book with Qualcomm’s modern Snapdragon X Plus 8-core CPU, today. This revolutionary Copilot+ PC smoothly integrates advanced AI, resulting in exceptional creativity and productivity.

Improved access to the ground-breaking Galaxy AI tools is also made possible by enhanced connection with the Samsung Galaxy ecosystem, which enables a single, simple, and effective workflow across several devices. With a 15.6-inch FHD display, a long-lasting battery with Super-Fast Charging, and Samsung’s multi-layer Samsung Knox security, all of these advances are contained in a thin design. Starting in October, a few areas will be able to purchase the Galaxy Book4 Edge 15-inch with the recognizable Sapphire Blue hue.

Galaxy Book4 Edge

Dr. Hark-Sang Kim, EVP & Head of New Computing R&D Team, Mobile experience Business at Samsung Electronics, stated, “Galaxy Book4 Edge series changed the game by bringing together Samsung Galaxy’s seamless mobile and PC integration with AI-driven productivity and creativity, and now it’s available at another great size to encompass every user’s unique preferences and needs.” With each addition to their lineup of next-generation AI PCs, they’re promoting AI innovation and giving everyone access to useful AI tools.

Design Portable and Features All-Day Battery

One of the most portable 15.6-inch laptops on the market is the Galaxy Book4 Edge 15-inch. A beautiful FHD display with anti-glare technology is housed in a slim, light chassis, providing a pleasant viewing experience in any lighting scenario. There are several connectors on the thin design, including USB-C, USB-A, HDMI, headphone/microphone, and a Micro SDcard, so connectivity isn’t compromised for mobility. Extended work periods are supported by a long-lasting battery with Super-Fast Charging, which also keeps the device ready to go whenever inspiration strikes.

Advanced Processing Enabled by Snapdragon X Plus

The industry-leading AI processing power and snappy speed of the Snapdragon X Plus 8-core architecture enable the Galaxy Book4 Edge 15-inch to fully use the extensive range of Copilot+ PC features.

Cocreator can quickly and easily bring ideas to reality

A high-definition camera and Wi-Fi 7 compatibility, together with Windows Studio Effects, allow for the unambiguous expression of visual concepts.

Use Live Captions to simplify taking notes or overcome obstacles to communication

“With its innovative on-device AI processing and responsive performance, the Snapdragon X Plus 8-core redefines possibilities,” stated Kedar Kondap, SVP & GM of Qualcomm Technologies, Inc.’s compute and gaming division. Its exceptional power economy allows it to keep up with busy lives and put users in the zone, whether they’re creating presentations on the go or launching innovative initiatives that will increase productivity to new levels.

An Unmatched Mobile AI Ecosystem

Access to the continually expanding Galaxy device ecosystem from Samsung opens up an easy-to-use working environment where productivity is unaffected by access restrictions and data may be transmitted with previously unheard-of simplicity. By letting technology do the hard lifting, users may work effortlessly between their phone and PC at any time. By giving you access to your Galaxy phone via Microsoft Phone Link, you can use your PC to access popular AI phone features like Live Translate, Photo Assist, and Circle to Search with Google. This opens up new avenues for communication, creativity, and discovery.

Samsung Knox, Samsung’s multi-layer security platform, protects the Samsung galaxy Book4 Edge 15-inch with end-to-end secure hardware, real-time threat detection, and collaborative protection to protect critical data and vulnerabilities. All Galaxy ecosystem smartphones and tablets have this protection. Microsoft Windows 11 includes data, credential, virus, and reliability protection, so your Copilot+ PC is protected.

Galaxy Book4 Edge Release Date

It will sell the Galaxy Book4 Edge 15-inch in Sapphire Blue, a vibrant, stylish, and unique hue, starting in October.

Read more on Govindhtech.com

[shubhampawrainfinium]

The Future of Communication: Fiber Optic Connectivity and Beyond

Market Overview and Report Coverage

The fiber optic connectivity market is a key segment of the telecommunications and data transmission industry, offering high-speed, high-capacity, and reliable communication solutions. Fiber optic technology uses light to transmit data through flexible glass or plastic fibers, providing superior performance compared to traditional copper cables. The growing demand for high-speed internet, increased data consumption, and advancements in network infrastructure are driving the expansion of the fiber optic connectivity market.

According to Infinium Global Research, the global fiber optic connectivity market is expected to grow significantly from 2023 to 2030. Factors such as the increasing adoption of fiber-to-the-home (FTTH) networks, the rise in data center deployments, and the need for enhanced network performance contribute to market growth. Additionally, the integration of fiber optic technology in emerging applications such as 5G and IoT is influencing market dynamics.

Market Segmentation

By Type:

Single-Mode Fiber (SMF): Single-mode fiber is designed for long-distance data transmission with a small core diameter, allowing the transmission of signals over long distances with minimal signal loss. It is commonly used in telecommunications, data centers, and high-speed network applications.

Multi-Mode Fiber (MMF): Multi-mode fiber has a larger core diameter and is used for shorter-distance data transmission. It is typically employed in local area networks (LANs), data centers, and enterprise networks. MMF is suitable for applications where high bandwidth and shorter distances are required.

Fiber Optic Cables: Fiber optic cables include various types of cables, such as loose-tube cables, tight-buffered cables, and ribbon cables. These cables are used for different applications and environments, including indoor and outdoor installations, and play a crucial role in network infrastructure.

Fiber Optic Connectors and Adapters: Fiber optic connectors and adapters are essential components for joining fiber optic cables and ensuring proper signal transmission. They include connectors such as SC, LC, ST, and MTP/MPO, and are used in various network configurations.

By Application:

Telecommunications: Fiber optic connectivity is widely used in telecommunications networks for high-speed data transmission and internet services. It forms the backbone of modern communication networks, enabling reliable and fast connectivity for voice, video, and data services.

Data Centers: Fiber optics play a crucial role in data centers, providing high-bandwidth connections between servers, storage systems, and network equipment. The increasing demand for data storage and cloud services drives the need for advanced fiber optic solutions in data center environments.

Enterprise Networks: Fiber optic connectivity is used in enterprise networks to enhance data transmission speeds, support high-bandwidth applications, and improve network reliability. It is employed in both local area networks (LANs) and wide area networks (WANs) to support various business operations.

Broadcasting and Media: In the broadcasting and media industry, fiber optics are used for high-quality video transmission, live broadcasting, and content distribution. The technology supports high-definition and ultra-high-definition video streaming, contributing to the growth of media and entertainment applications.

Others: This category includes specialized applications such as military and defense communications, smart grid infrastructure, and medical imaging. Fiber optics are used in these sectors for high-speed data transmission, reliability, and precision.

Sample pages of Report: https://www.infiniumglobalresearch.com/form/1479?name=Sample

Regional Analysis:

North America: North America, led by the United States and Canada, is a major market for fiber optic connectivity due to advanced telecommunications infrastructure, high demand for high-speed internet, and extensive data center deployments. The region’s focus on technology innovation and 5G network expansion drives market growth.

Europe: Europe is a significant market, with countries such as Germany, the UK, and France leading in fiber optic adoption. The region’s emphasis on network modernization, high-speed broadband, and digital transformation contributes to market expansion.

Asia-Pacific: The Asia-Pacific region is expected to experience substantial growth due to increasing urbanization, rising internet penetration, and the expansion of telecommunications networks. Countries like China, India, and Japan are key players in the market, driving demand for fiber optic solutions.

Latin America and Middle East & Africa: These regions are witnessing growth in the fiber optic connectivity market due to improving telecommunications infrastructure, increased investments in network expansion, and rising demand for high-speed internet services. The expanding IT and communication sectors contribute to market development.

Emerging Trends in the Fiber Optic Connectivity Market

Several trends are shaping the future of the fiber optic connectivity market. The deployment of 5G networks is driving the demand for high-capacity fiber optic solutions to support increased data traffic and faster speeds. The growth of data centers and cloud computing is also influencing market dynamics, as data centers require high-bandwidth fiber connections for efficient operations. Additionally, the integration of fiber optics in smart city projects and IoT applications is expanding the scope of fiber optic technology. The development of new fiber optic technologies, such as bend-insensitive fibers and advanced optical networking solutions, is further driving market innovation.

Major Market Players

Corning Incorporated: Corning is a leading provider of fiber optic products and solutions, including optical fibers, cables, and connectors. The company’s focus on innovation and advanced technology supports its market leadership.

OFS Fitel, LLC: OFS offers a range of fiber optic products, including cables, connectors, and splicing solutions. The company’s expertise in optical communications and commitment to quality contribute to its market success.

Prysmian Group: Prysmian provides a comprehensive portfolio of fiber optic cables and solutions for telecommunications, data centers, and industrial applications. The company’s global presence and technological expertise enhance its market position.

Nexans S.A.: Nexans offers a variety of fiber optic products and solutions, including cables and connectors, for telecommunications and data networking applications. The company’s focus on innovation and customer satisfaction supports its role in the market.

Huanghe Whirlwind Co., Ltd.: Huanghe Whirlwind specializes in fiber optic cables and related products, serving telecommunications and industrial markets. The company’s emphasis on technological development and quality assurance contributes to its market presence.

Report Overview : https://www.infiniumglobalresearch.com/market-reports/global-fiber-optic-connectivity-market

[boldcompanynews]

TE Connectivity (TE) Empowers the Innovative Future of Service Robotics with Wireless Connectivity Solutions, Business News - Information Today Internet - BLOGGER https://www.merchant-business.com/te-connectivity-te-empowers-the-innovative-future-of-service-robotics-with-wireless-connectivity-solutions-business-news/?feed_id=183676&_unique_id=66d200706e9ac , /PRNewswire/ — The rapid expansion of the application of artificial intelligence (AI) and machine learning has accelerated vigorous development of the robot market. With its extensive engineering proficiency, TE Connectivity (TE) has built a strategic portfolio for the field of service robots to meet customers’ diverse demands. With the acquisition of Laird Connectivity’s external antenna business and Linx Technologies, TE further refines a high-performance product portfolio of antenna, connectors, etc., strengthening technological advantages and innovation capabilities to support automation across sectors. TE is committed to the continuous development of the service robot field and creating greater collaborative value for customers.Since the advent of industrial production, demands for higher and more precise productivity have continually grown. Robotics answer many of these demands with the rapid development of technologies internationally. Through robotics breakthroughs in the United States, super manufacturing plants in China, and widespread adoption in Japan, the global robotics industry is advancing on both the supply and demand sides. Robotics can help increase production, sales, and quality by offering viable solutions to provide a more effective division of labor and pressures for cost reductions. The potential applications of the robotics industry continue to increase, creating vast market opportunities.   The global robotics market size reached USD 46 billion in 2023, and the International Federation of Robotics expects the market to reach USD 66 billion for the full year 2024. In the market, commercial service robots are becoming increasingly popular across a wide range of use cases to address the challenges of labor shortages and rising minimum wages. Currently, there are six main application areas for commercial service robots:Professional cleaningLogistics and transportHospitalityAgricultureHealthcareInspection and maintenanceCompared to industrial robots, there is more emphasis on the interaction experience with service robots. Frequent interactions between users and robots require efficient feedback speeds, placing higher demands on the stability of the wireless connection, high-speed transmission, shock resistance of antennas and other components, and miniaturization technology.As a global industrial technology company, TE Connectivity plays a crucial role in the service robot field. TE’s antennas – using wireless connectivity solutions help enable service robots to perform efficiently in various environments, meeting automation needs across fields and building an innovative ecosystem for intelligent robots. TE’s industry-leading antenna and connector technologies provide a broad portfolio of products that support wireless data delivery. These technologies have the high stability and high-speed transmission capabilities needed to address the stringent wireless connectivity requirements of service robots.Antennas and connectors are undoubtedly two key technologies in the service robot ecosystem. Based on the varying operating environments of service robots, it is critical to select the appropriate antennas. For example, TE’s wireless connection technologies – such as Wi-Fi, Bluetooth, NFC and RFID for high-security, short-range indoor communication environments – provide stable data transmission and moderate power consumption. For both indoor and outdoor operations, solutions such as TE’s antennas for LoRaWAN applications suitable for long-range communication with low power consumption. For longer-range, highly mobile outdoor operations, TE provides products

such as ultra-wideband (UWB) and cellular antennas, to support long-distance communication and precise positioning navigation systems.In addition to wireless connectivity, service robots need connectors that account for a wide range of factors. The choice of connectors should be made during the design phase with consideration given to the environment, adaptability, durability, reliability, ease of installation and maintenance, and matching sizes and interfaces. They may also need to be waterproof and dust-proof with electrical performance and future scalability. TE’s broad connector portfolio offers solutions to address these concerns. For example, warehouse transport robots require GPS positioning, which in turn requires data transmission and environment deployment. TE products, such as RF coax connectors, D-Subminiature connectors, or FPC connectors – which can withstand vibration, high temperatures and other environmental variables – are viable options for consistent and efficient operation.TE also provides diverse solutions to meet different needs, which can accelerate the speed to market of their products. As a leading company in embedded antenna solutions, TE can support adapting to the mechanical constraints of clients and helping select the appropriate connectors, cables, and frequencies according to requirements. TE antenna solutions using  Laser Direct Structuring (LDS) technology can be adapted around existing components or structures to save equipment space.With years of experience in engineering, TE has global manufacturing capabilities, material science experience and signal integrity analysis. TE is committed to creating value through innovative solutions supporting our customers. A future-focused strategy, diversified product solutions, high quality and reliability, and strong global brand recognition have always been TE’s core competencies. As a global industrial technology leader, TE will continue to work together with its customers to create a safer, sustainable, productive, and connected future.ABOUT TE CONNECTIVITY TE Connectivity (“TE”) headquartered in Switzerland, is a global industrial technology leader creating a safer, sustainable, productive, and connected future. Our broad range of connectivity and sensor solutions enable the distribution of power, signal and data to advance next-generation transportation, renewable energy, automated factories, data centers, medical technology and more. With more than 85,000 employees, including over 8,000 engineers, working alongside customers in approximately 140 countries, TE ensures that EVERY CONNECTION COUNTS. Learn more at www.te.com.Link: Service Robot Solutions | TE Connectivity“SHANGHAI, Aug. 30, 2024 /PRNewswire/ — The rapid expansion of the application of artificial intelligence (AI) and machine learning has accelerated vigorous development of the robot market. With its extensive…”Source Link: https://www.asiaone.com/business/te-connectivity-te-empowers-innovative-future-service-robotics-wireless-connectivity http://109.70.148.72/~merchant29/6network/wp-content/uploads/2024/08/ged4c86ffc22c08cf0a17958d29a16769109378d8251ef88ec210153ebf9ac88d13d5bed06f3b64947c590dbb45b6fcac_64.jpeg #GLOBAL - BLOGGER , /PRNewswire/ — The rapid expansio... BLOGGER - #GLOBAL