#Mold Clean Up Rochester NY

[lozierenvironmentalconsulting]

Mold-Free Living: Lozier Environmental Consulting, Inc.'s Strategies in Rochester, NY

Mold Problems? Lozier Environmental Consulting, Inc. Has You Covered. When it comes to suspected mold problems in Rochester NY, Lozier Environmental Consulting, Inc. stands out as a reliable partner.

A Common-Sense Approach to Mold Investigations

Lozier Environmental Consulting, Inc. takes a practical and common-sense approach to mold investigations. Their aim is to assess mold issues with a sensitivity to all parties involved. A thorough investigation and sampling process, Lozier Environmental strives to identify the cause of moisture damage and confirm or refute the presence of mold in both residential and commercial buildings.

Comprehensive Sampling Methods

Samples are obtained through direct testing of visible mold colonies on a structure using the tape-lift method or swab/culture. Fungal air sampling is also part of their arsenal and can be performed using viable or non-viable methodologies.

Detailed Mold Assessor’s Report

The mold assessor’s report plays a crucial role in the process. It defines site conditions and observations, interprets sample results, and provides a remediation protocol in line with the requirements of the NYS Dept. of Labor.

Post-Remediation Inspections for Peace of Mind

Lozier Environmental Consulting, Inc. goes the extra mile by conducting post-remediation inspections. This involves non-viable air sampling to determine the completeness of the remediation performed by contractors. It ensures that the building is safe for re-occupation.

So, if you’re facing mold removal problems in Rochester NY, Lozier Environmental Consulting, Inc. offers a comprehensive and effective solution. Their experienced team, common-sense approach, and commitment to following industry guidelines make them a trusted partner in assessing and remedying mold issues in both residential and commercial settings. Don’t let mold problems linger — let the experts at Lozier Environmental Consulting, Inc. guide you through a thorough assessment and remediation process for a healthier indoor environment.

[onthespotcleanersblog]

How Often Should You Get Duct Cleaning in Rochester, NY?

Air ducts play a crucial role in your home’s air quality and overall efficiency, especially in areas like Rochester, NY, where weather conditions can be extreme. But how often should you get them cleaned? We’ll delve into the factors that influence duct cleaning frequency, why it’s essential, and how to know when it’s time for maintenance.

Why Duct Cleaning is Essential for Your Home

Air ducts serve as the respiratory system of your home, circulating warm and cool air throughout your living spaces. Over time, these ducts can accumulate dust, allergens, and other debris, impacting both air quality and HVAC system efficiency. Regular duct cleaning not only helps maintain a cleaner living environment but also extends the life of your HVAC system.

In Rochester, NY, where seasonal changes can range from hot, humid summers to freezing winters, having clean ducts becomes even more vital. Poor indoor air quality can aggravate allergies, asthma, and other respiratory conditions. Regular cleaning helps to eliminate these risks, ensuring that your family breathes fresh, clean air year-round.

How Often Should You Get Your Ducts Cleaned?

While the frequency of duct cleaning depends on several factors, the National Air Duct Cleaners Association (NADCA) recommends having your ducts cleaned every 3 to 5 years. However, this timeline can change based on specific conditions in your household or environment.

Here are some scenarios where you may need more frequent cleaning:

Pets in the home: If you have furry friends, their hair and dander can easily get trapped in the ducts, requiring more frequent cleaning.

Allergies or asthma: If anyone in your household suffers from allergies or asthma, more regular cleaning (every 2 to 3 years) may be necessary to improve air quality.

Recent renovations: If you’ve recently remodeled or renovated your home, dust and debris can infiltrate your ducts, necessitating a cleaning soon after.

Visible mold or mildew: If you notice signs of mold growth inside your ducts, immediate cleaning is essential for health reasons.

Unpleasant odors: If your home has persistent odors, it could be a sign that contaminants are trapped in the ducts, and cleaning is necessary.

Signs That Your Ducts Need Immediate Cleaning

Sometimes, waiting for the standard cleaning interval isn’t enough. If you notice any of the following signs, it’s time to schedule a duct cleaning as soon as possible:

1. Dusty Air Vents

When dust builds up around your air vents or on surfaces around your home, even after cleaning, this could indicate that your ducts are circulating dust and debris.

2. Unexplained Increase in Energy Bills

A sudden spike in your utility bills could be due to your HVAC system working harder to circulate air through clogged ducts. Cleaner ducts allow the system to run more efficiently, reducing energy consumption.

3. Poor Airflow

If certain rooms in your home seem to have less airflow than others, it could be due to blockages in your ducts. Cleaning the ducts can restore proper airflow and improve overall comfort.

4. Allergy Flare-Ups

If you or someone in your home is experiencing more frequent or severe allergy symptoms, your dirty air ducts might be circulating allergens like dust mites, pollen, or pet dander.

5. Persistent Musty Odors

A musty or stale smell could indicate the presence of mold or mildew inside your ductwork. Mold spores can spread through the air, posing serious health risks. A professional cleaning can eliminate this problem.

The Importance of Professional Duct Cleaning

Though it might be tempting to clean your ducts on your own, professional duct cleaning services are essential to ensure a thorough job. Trained professionals use specialized equipment to reach deep into your duct system, removing dust, debris, and contaminants that standard home cleaning tools can’t reach.

Health Benefits of Duct Cleaning

Reduction of Allergens: Dust, pet dander, and pollen can easily build up in your ducts. Regular cleaning minimizes these contaminants and helps reduce allergy symptoms.

Mold Prevention: Moisture buildup in your duct system can lead to mold growth. Professional cleaning helps to remove mold spores and prevent further growth.

Odor Elimination: Musty odors caused by mold, mildew, or other contaminants in your ducts can linger in your home. Duct cleaning eliminates the source of these unpleasant smells.

Energy Efficiency

A clean duct system allows air to flow freely, reducing the amount of work your HVAC system needs to do. This can result in lower energy bills and a longer lifespan for your heating and cooling equipment. In a place like Rochester, NY, where HVAC systems are used heavily throughout the year, the energy savings can be significant.

DIY vs. Professional Duct Cleaning: What’s the Difference?

You may wonder if DIY duct cleaning is a viable option. While there are some steps you can take to maintain cleaner ducts, such as regularly changing your air filters and vacuuming vent covers, DIY methods cannot compare to the thoroughness of a professional service.

DIY Cleaning: This can help maintain cleanliness in between professional cleanings but won’t remove deeply embedded dirt and contaminants.

Professional Cleaning: Certified technicians use high-powered vacuums, brushes, and blowers to reach every part of your duct system, ensuring a comprehensive clean. They also inspect for any issues such as leaks, blockages, or mold growth.

Choosing the Right Duct Cleaning Service in Rochester, NY

When selecting a professional duct cleaning company, there are a few factors to keep in mind:

Certifications: Look for companies that are NADCA certified. This ensures they follow industry standards and use proper cleaning techniques.

Experience: Choose a company with years of experience in the industry, as this typically means better quality service.

Customer Reviews: Check online reviews and testimonials to ensure the company has a solid reputation for customer satisfaction.

Pricing: While price is important, remember that the cheapest option isn’t always the best. Look for a company that provides a balance of quality service and fair pricing.

Conclusion: Keep Your Air Clean and Your HVAC Efficient

In Rochester, NY, duct cleaning is essential for maintaining good air quality and ensuring your HVAC system runs efficiently year-round. While general guidelines suggest cleaning every 3 to 5 years, factors such as pet ownership, allergies, and recent home renovations can affect how often you need this service. Keep an eye out for signs like increased dust, musty odors, and rising energy bills, as these could indicate your ducts are overdue for a cleaning.

[ultimatepestonline]

5 Key Advantages of Regular Pest Management

If the house is tidy and well-maintained, it must be pest-free, right? The answer is no.

Bugs and pests can come into homes for various reasons, even if the house is clean. Some pests are clearly visible, while others can hide without anyone noticing.

Therefore, all homeowners should consider regular pest control.

Regular pest checks allow experts to find potential issues before they become major infestations. Once spotted, they can take steps to keep pests away. By looking closely at your home, these pros can suggest ways to block entry points, fix problem areas, and make changes to reduce what attracts pests to your home.

Health Improvements

Pests can spread diseases, trigger allergies and asthma, and contaminate food and surfaces in your home. Many pests are drawn to damp areas. If you have leaks, wet or rotting wood, or other moist spots, this can lead to mold and germs, which are also very unhealthy for your family. Regular pest control helps fix these unhealthy conditions that can attract pests.

Lower Pest Control Costs

Catching pest problems early saves you money over time. It costs less to treat a small issue than a big infestation. Also, if pests are left unchecked for a long time, they can cause major damage to your home. This means you'll pay not just for pest treatment, but also for costly repairs to fix the damage they've caused.

Better Home Quality

Pest control experts can spot problem areas like damp spots, leaks, cracks in the foundation, gaps around doors and windows, roof damage, and crawlspace issues. These problems can lead to water damage, higher utility bills, extra strain on your HVAC systems (causing them to wear out faster), and even structural damage to your home. By finding these issues sooner, you can fix them earlier, hopefully preventing more damage that could happen if left untreated.

Regular Visits

With routine pest control, you don't need to wait until a pest problem shows up. Visits are set up on a regular basis, saving you the hassle of calling around to find someone who can come out quickly. This also means you get priority if an issue comes up between your scheduled visits. Your technician will also get to know you and your home, making it easier to spot where a problem might have started and how to fix it quickly and effectively.

Get Your Free Quote Today!

Are you ready to take the first step towards a pest-free home in Rochester, NY?  Contact Ultimate Pest Control now to request a free quote. We can help you with pest control solution that meets your specific needs. Here’s how you can reach us:

Give Us a Call: Prefer to speak with someone directly? Call to discuss your pest control needs and schedule an inspection. Our team will respond to your queries as quickly as possible.

Don't wait for pests to become a bigger problem. Contact today and enjoy the peace of mind that comes with having a protected, pest-free home.

[acleanerimagerochester-blog]

How To Get Rid Of Mold

Mold is a common problem in homes and can cause health issues such as allergies, asthma, and respiratory problems. It can also damage your property and belongings. If you suspect that you have mold in your home, it's important to take action to get rid of it. In this blog, we'll discuss some effective ways to get rid of mold and prevent it from coming back.

Identify the source of the mold

Before you can get rid of mold, you need to identify the source of the problem. Mold needs moisture to grow, so it's often found in areas that are damp or have high humidity. Common sources of moisture include leaks, condensation, and poor ventilation. Look for signs of water damage such as discoloration, peeling paint or wallpaper, and a musty odor.

Clean up the mold

Once you've identified the source of the mold, you can start to clean it up. Small areas of mold can be cleaned with a solution of one part bleach to ten parts water. Wear gloves and protective eyewear when handling bleach, and make sure the area is well-ventilated. Scrub the affected area with the bleach solution using a stiff-bristled brush, and then rinse with clean water. Allow the area to dry completely.

For larger areas of mold, or if you have health issues that make it difficult to handle bleach, it's best to call a Professional Mold Remediation Company in Rochester, NY. They have the expertise and equipment to safely and effectively remove mold from your home.

Prevent mold from coming back

To prevent mold from returning, you need to address the source of the problem. Fix any leaks or water damage, and make sure your home is properly ventilated. Use exhaust fans in the bathroom and kitchen to remove moisture, and open windows when weather permits. Use an air conditioner to keep humidity levels below 50 percent.

It's also important to keep your home clean and dry. Wipe up spills and leaks promptly, and don't leave wet towels or clothing lying around. Clean bathrooms and kitchens regularly to prevent mold from growing on surfaces.

With a little effort, you can enjoy a mold-free home that is safe and healthy for you and your family. All you have to do is remember to identify the source of the mold, clean it up using a bleach solution or call a professional remediation company, and take steps to prevent it from coming back.

If you need professional help with mold removal or remediation, consider contacting A Cleaner Image. They have years of experience in Mold Remediation in Rochester NY, and can help you get rid of mold safely and effectively. Contact today!

[roofing-contractors]

Tips for Commercial Roofing Repair

When it comes to commercial roofing repair, the thought that strikes our mind is that it will be a costly expense. But if we say that these expenses can be reduced if we take proper measures to protect the roofs. Most people make the mistake that they ignore small leakage in the roof & don't take immediate action to resolve them which will further result in large roofing leakage. The cost of repair also increases as per the size of the leakage, to avoid unwanted expenses you can just follow the precautionary steps to take proper care of your office roofs.

Identify the Leakage Area- 

The first step in this process is to identify the area where the leakage has started. Initiate a quick inspection of the roof by wearing a proper kit & avoid putting pressure on roofs during the inspection because excess pressure on the roof can cause damage to it. Identify whether the leakage is big or small. If it is a small leakage then look at the underside of the roof for 'shiners.' Shiners are nails that miss the framing member, in this case when the carpenter nailed the roof sheathing to the rafters. In the cold attic, moisture that escapes from the rooms below can condense on nails. This can sometimes be seen if you climb into your attic on a cold night. Because of the frost on the nails, they will all appear white. As the attic heats up during the day, the frost melts and drips, then the nails frost up at night again. Clipping the nail with side-cutting pliers is the best solution.

Roof Needs Permanent Replacement Or Repair-

The second step is to decide whether the identified roof leakage requires a permanent replacement or repair. If you are in confusion whether to replace or repair the roofing then it is better to take the help of the roofing professionals as they can guide you to make the proper decision. 

Periodic Roof Cleaning-

To avoid any breakage or leakage of roofing, it is advisable to periodically clean the roofs, especially flat commercial roofs, as they tend to collect debris from the surrounding areas especially if it’s a windy location. It may not seem like a pile of leaves could do damage, but those kinds of piles are the perfect place for water to hang out and eventually cause mold or rot.

Ensure Proper & Quick Repair Of Your Roofing- 

The best way to avoid further roofing problems is to make a quick decision related to the repair or replacement of roofs. If you think that your roof needs proper replacement then you should take quick action as prevention is better than cure. The faster you make a decision, the less will be the cost of repair. 

High-Quality Material Should Be Used-

The best way to avoid any kind of issues in your roofing for the long term is to ensure that high-quality material is used. The material used in the roofings decides its durability. 

Ensure Timely Inspection-

To maintain your roofings for a long period, you should initiate a timely inspection of the roofs. As timely inspection helps you detect any minor or major defects in the roofing so that you can resolve them as soon as possible.

At last, we can say that if we take proper care of the roof and follow these steps we can avoid the heavy expenses which occur in case of reinstallment of roofings. And if you are looking for a professional who can help you with any roofing-related issue then you can consider experts at Cameron Roofing in Rochester NY. Being in the business for 22 yrs, they can help you with all professional roofing and you can apply for a free estimate available on their site.

[corey634]

Hire a Concrete Contractor

Concrete contractor hire

It is always best to hire a contractor to carry out a concrete job. Concrete today is the most commonly used man made material in the entire world. First developed by the Romans, concrete is essentially a mixture of cement, aggregate consisting of granite or limestone gravel and sand. When mixed with water, concrete may be poured into a mold to form predetermined shapes, something that is essential and useful for innovative and yet simple construction. The thing about concrete is that mixing it requires precision and specific knowledge of the ratios in which to mix the concrete. This along with the experience professionals have, make it a good reason to hire a contractor to have a concrete job done Concrete Contractors Rochester NY .

Common concrete jobs

The most called for concrete job by homeowners is to have a concrete driveway installed. Concrete being a hardy material lasts for years, and often decades with minimal maintenance. Because of this, homeowners demand concrete driveways on which to enter garages or to simply park vehicles. Also, having a concrete driveway offers a clean and simple looking landscape to a home. Concrete walkways across front and backyards too are high in demand since these too offer a pedestrian function similar to a concrete driveway and enhance the look of a home.

Other major concrete jobs often called for would be installing a concrete basement. Concrete basements are useful since concrete being a waterproof material once set, provides a dry area for storage or additional space. Many homeowners also like to have concrete decks and patios installed on their front or backyards. These provide and extended outdoor living space that is convenient and easy to maintain. Many people even have fireplaces and barbecues built right onto their decks, on which to enjoy a cookout. Whatever the need, it is always best to have a professional contractor do the job.

Hiring a contractor

Before going about hiring a contractor, make sure you know exactly what you want. Also ensure that your community civic authorities allow the kind of construction you have in mind. Once you have these details chalked out and any permission appropriately documented, go ahead and get hold of a contractor. The best way to reach a good contractor is through references, so canvass all your friends and relatives in the area. If this is not a viable option, call up the local commercial directory and gather a list of contacts for contractors who operate within the area. Speak to each of these, explain the job, and ask them for quotes and references.

When selecting a contractor, always go with one that has a balance of experience and low cost. This means utilizing the services of a contractor who is not too expensive and yet has enough jobs successfully accomplished to qualify the person. Narrow down your list to three most preferable contractors.

Finally, always ensure that you call up at least two references provided by each of the shortlisted contractors to ensure that your confidence in them is well place. Then ask the final three to bid on your project and go with the one that seems most suitable.

[clean-pro-gutters-rochesterny]

Your Gutters Deserve The Very Best Care: Clean Pro Gutters Rochester Is Here To Help You

Spending an afternoon struggling to clean your gutters isn't something most homeowners look forward to. It is dangerous work and takes all the right tools and ladders to do correctly. Regular gutter cleaning is required to keep your roof, house, and landscaping free from water, debris, and damage throughout the year.

Clean Pro Gutters Rochester is here to take care of them for you with our quick and budget-friendly service. We make the entire procedure effective and simple for homeowners similar to you every day of the year.

Why You Need To Have Your Gutters Professionally Cleaned

Gutters are built to collect rainwater from the roof and carry it far from the foundation of the house through downspouts. Because they both need to be clear in order to do this, having obstructed gutters could cause them to overflow.

If the water has no place to go, it will naturally fill up the gutter and ultimately overflow onto the foundation of your home! It could leak into your basement or crawl space. Foundation repairs can cost thousands and your house could be at risk of mold.

Blocked gutters can likewise strain your roof and the fascia (the boards behind the gutters) if they are clogged. They could collapse off the roof of your home, triggering damage to the shingles of the roof and the outside of your house.

Routine expert cleaning of your gutters can avoid damage to your roof, outside and foundation, conserving you thousands in possible repair expenses.

Why Clean Pro Gutters Rochester Is Your Best Choice

We have been in the gutter cleaning business for over twenty years offering fast, budget-friendly, and fully guaranteed services to homeowners much like you throughout the nation. We guarantee all of our local specialists with a full guarantee of their work. We make getting a quote easy and totally free without wasting your time with a home consultation. Our local specialists are totally geared up to handle any kind of gutter and any sized home securely and run the risk of complimentary.

At the end of the day, you would like to have clean gutters and not a lot of trouble or problems. Gutter cleaning isn't fancy however it does need an expert touch and the best equipment to be done properly and safely and securely. You also don't want to invest a fortune to get it done.

Clean Pro Gutters Rochester checks all the boxes! Now is the time to get a free quote online or by phone (877) 325-2162 and get scheduled prior to any rainy weather condition ahead. Our schedules fill throughout the season so don't delay. We guarantee that you will be more than happy with our service and your gutters again!

We cover all of Rochester, NY and surrounding areas, check here:

Check our social media page: Facebook

[sylviajackson5]

Removing A Tree Stump Rochester Ny

Contents

Removal cost guide

Plastic tablecloth. replace

Tree service contractors

Latest coronavirus news

With the coronavirus pandemic ravaging New York’s economy … collection of organic waste will be suspended. Tree pruning and tree stump removal will be curtailed. There will be a hiring …

A tree stump can be removed by good old-fashioned manual labor, or you can assist it in the natural process of rotting away. If you have the ability to let the stump remain in place for a full year or even two, the dried wood may be easier to cut out than when working on a new stump with greenwood.

Опубликовано: 8 авг. 2018 г. Rochester Hills Tree Stump Removal and Grinding www.mrstump.net (Mr Stump). Следующее. Tree Stump Removal – Продолжительность: 13:40 Pete B. Recommended for you. Removing Stump with Small Excavator – Продолжительность: 9:38…

Related Guides: Stump removal cost guide, Tree Removal Cost Guide, Stump Grinding. Although cutting down a tree may seem like a major project, it's actually straightforward when compared with removing a stump. Stump removal is a lot more involved, which is why it's not usually included in…

Ryan Keeling hears how, despite the almost unbelievable range of essential work he creates, the last person to celebrate his …

Tree Removal Techniques Rochester Ny Tree And Stump Removal Cost Rochester Ny Facing a $7.4 billion loss in tax revenue, Mayor Bill de Blasio warned Thursday that New York City will need … $3M in FY21 –Reduction of Tree Stump Removal Program – contract reduction … Treecare Rochester Ny ted collins offers the best tree care services in the Rochester

Mayor de Blasio proposed an $89.3 billion executive budget for New York City on Thursday … meant to boost bicyclist safety, cut tree pruning and stump removal, scale back sanitation and cleaning …

Before the advent of herbicides and stump grinders, removing tree stumps was a laborious and … home improvement and New York travel.

Urban Arborist Rochester Ny Professional Service with a Personal Touch. Urban Tree Service offers premier tree, plant and lawn health care services as well as horticultural consulting year … Get directions, reviews and information for Urban Arborists in Brooklyn, NY. I had Urban Arborists remove a HUGE Norway Maple from the back of my brownstone years ago. A really difficult

Reasons to remove tree stumps or leave a tree stump in the ground. Can't decide whether to hold on to your stump or haul it out for good? Brian Cox from Davey's Dallas, Texas office recommends removing a stump if you can. "An old tree stump might not cause problems at first, but the longer…

Consulting Arborist Rochester Ny University of New Hampshire forward Taylor Wenczkowski of Rochester on Wednesday was selected in the third round of the … Tree And Stump Removal Cost Rochester Ny Facing a $7.4 billion loss in tax revenue, Mayor Bill de Blasio warned Thursday that New York City will need … $3M in FY21 –Reduction of Tree Stump

This article shows you how to remove a tree stump without breaking your back. This method is safe and effective, and doesn't require a lot of manual labor. The stump removal will smolder for days, eventually leaving a charcoal-filled hole. It's dangerous having a giant, smoldering ember in your yard…

Hypertufa can be molded into a plant container that will fit the exact size of a tree stump … the planter and remove the plastic tablecloth. replace the planter on the stump.

Hire the Best Tree Services in Rochester, NY on HomeAdvisor. We Have 650 Homeowner Reviews of Top Tree Removal – For Business, Tree Stump Removal, Shrubs – Trim or Remove, Tree Stump Removal – For If you're looking for tree service contractors that serve a different city in New York…

Sign up for our COVID-19 newsletter to stay up-to-date on the latest coronavirus news throughout New York City New Yorkers won’t be able to beat the heat by diving …

The post Removing A Tree Stump Rochester Ny appeared first on Rochester Tree Service Pros.

source https://rochestertreeservicepros.com/removing-a-tree-stump-rochester-ny/ from Rochester Tree Service Pros https://rochestertreeservicepros.blogspot.com/2020/05/removing-tree-stump-rochester-ny.html

[haloburns]

it seems my family does much better without me around. all they’ve done is snipe at each other and me, and my mom has made my sister feel like shit bc apparently she isn’t living up to some sort of ideal my mother has created of me??? i barely made As and Bs in high school, i spent an entire month’s worth of weekends out drinking and grinding on guys at college. im essentially working two jobs and??? paying for nothing???? i honestly want to move out and get my own apartment but at the same time im not ready to handle bills and lack of access to comfort. like that was my biggest thing in rochester was the fact that i was essentially touch starved. im not comfortable enough with the people im friends with to go up to them and just hug them for no reason. and my art feels stunted here. i cant write, i cant draw. i can barely get out of bed in the mornings. it feels like my depression and all the bad shit thats happened to me keeps weighing on me and i dont want to leave bc i love my family with all of my heart, but i also don’t know what to do!!!

the magic here is becoming suffocating again, i can feel its weight and it makes things difficult for me. nothing is the fucking same anymore. i don’t work mornings, i work nights instead. i cant even bring myself to clean up my room, which desperately needs to be done. im not bothering to upack my suitcases. why bother?? im leaving in like three weeks. and part of me doesn’t want to come back. its the same part of me that doesn’t miss winchester anymore, and the part that is glad that i left. there’s something so freeing about moving away, and coming back feels awkward. it feels like it SHOULD fit, that i should fit right into this old mold that was me. but i don’t. and i dont know how to tell my mom bc she will probably think im “getting above my raising” which is an idea we’ve talked about in ref to other people and the way they treat me when they learn that ive moved to ny for school.

but at the same time, things are still too similar. i still know which lights i can and can’t speed through on yellow. i know that i have to press hard with the hopper for the espresso at work. that the blender does a weird thing when it makes fraps. i know when traffic gets busy and know what roads to take to avoid it. it feels like i should forget these things, even after only four months. but i can still zip through town and know which lights are a bitch and how to avoid them.

i just want to know why i fucking feel like this and why i seem to be the dissenting piece in my family.

[lozierenvironmentalconsulting]

Mold Sampling Rochester NY | Mold Remediation

We provide expert mold removal services for your business or property. Ensure a mold-free environment by consulting, sampling, and remediating. Trust us to safeguard your space and preserve its integrity. Contact now!

Visit: https://www.lozierenv.com/services/mold-sampling-and-consulting

[manuelclapid]

Why Your House is Cold and Stop Patio Algae and Moss

Main heating supply ducts need to get smaller the farther away they are from the furnace. Note how the large duct on the left narrows down. (C) Copyright 2018 Tim Carter

Why Your House Is Cold

Question #1: Tim, I’ve got a forced-air furnace. Several rooms in my house are cold in the winter and are hot and stuffy in the summer when the AC is on. Most of the rooms are comfortable. Why do you think this is the case? What can be done to fix it and if I build a new home how can I prevent it? Kelly S., Rochester, NY

Do you have the same heating and cooling problems that Kelly has? I know many do based on the number of people who email me each week when it gets cold and hot!

There are several possible reasons why a few rooms in your home might not be as comfortable as others. Let’s assume that the vent covers in the rooms are wide open, the damper controls in the branch ducts are wide open and there are no stuffed animals being held prisoners down in the ducts.

It’s important to realize that furnaces and AC units are like shoes and clothes. They are matched to the heating and cooling requirements of your home. If you buy shoes that are too small, you bet you’ll be uncomfortable. A professional heating and cooling contractor will do calculations that tell him exactly how many cubic feet per minute of conditioned air must go into each room to keep you comfortable.

The supply air duct system in your home needs to mimic the blood vessels in your body. The reason your blood pressure is the same throughout your entire body, even at your fingertip, is because the blood vessels get smaller and smaller the farther away they are from your heart.

Your main supply duct needs to do the same or otherwise, there’s not enough energy in the remaining forced air to push into the rooms at the far end of your home. If your basement is unfinished, look at your main supply duct to see if it gets smaller as branch ducts go off towards the other rooms that are comfortable.

You might be able to fix your existing supply ducts with relative ease if they’re accessible. The first step in the process is to have a contractor do the calculations to see if enough air is getting to each room. There are online help aids if you want to do this yourself. Look for a Manual J guidebook should you want to attempt to do all the calculations.

The second step is to make sure your furnace or AC units are indeed the correct sizes. A professional contractor will probably have to assist you with this. If your furnace and AC unit are sized properly, then make sure your main supply duct does get smaller and smaller. If it doesn’t, then you’ll have to modify it.

Stop Patio Algae and Moss

Question #2: Mr. Tim, can you help me? I’m in a constant battle fighting mold, mildew, and algae on my outdoor patio and sidewalks. I’m tired of scrubbing them. Is there some magic liquid I can spray on the concrete and paver brick? David L., Orlando, FL

I don’t know about you, but I have the same problem as David. On the north side of my home, I’ve got a paver stone pad outside a door from my garage. It constantly has slippery green algae I have to clean off, well I used to clean it!

Mold, mildew, algae, and who-knows-what likes to grow where they can get abundant food and moisture. Shaded patios and sidewalks can be prime candidates. These organisms will grow on vertical surfaces too such as siding and brick.

I decided to solve the problem using technology from shipbuilders of old. Go back more than 200 years and the shipbuilders used thin copper plating on the hulls of sailing ships to prevent the growth of barnacles that would create drag and slow down the ships.

Copper is a natural, safe biocide. As with most things you don’t want too much as it can cause problems. I’ve discovered a safe way to put copper on my pavers so it doesn’t leach into the pure water of the lake I live on here in New Hampshire.

I mix up about 1.75 pounds of blue copper sulfate crystals with a gallon of hot water. The crystals dissolve very fast as you stir them. I then put this solution in a standard hand-pump sprayer and apply a fine mist of the liquid just on the pavers and concrete.

I’m careful to make sure I don’t have any get in the grass and I only put on enough so it doesn’t puddle. You’ll discover it almost always soaks into the masonry in a few minutes.

After it dries, I apply more. I do this about three or four times so the copper soaks down into the surface of the masonry. The surface of the concrete does end up with a blueish color, but the color fades away in a week or two. The best part is I don’t have any algae, mold or mildew problems and neither will you!

The post Why Your House is Cold and Stop Patio Algae and Moss appeared first on Ask the Builder.

from Home https://www.askthebuilder.com/why-your-house-is-cold-and-stop-patio-algae-and-moss/ via http://www.rssmix.com/

[thegregorybruce]

Why Your House is Cold and Stop Patio Algae and Moss

Main heating supply ducts need to get smaller the farther away they are from the furnace. Note how the large duct on the left narrows down. (C) Copyright 2018 Tim Carter

Why Your House Is Cold

Question #1: Tim, I’ve got a forced-air furnace. Several rooms in my house are cold in the winter and are hot and stuffy in the summer when the AC is on. Most of the rooms are comfortable. Why do you think this is the case? What can be done to fix it and if I build a new home how can I prevent it? Kelly S., Rochester, NY

Do you have the same heating and cooling problems that Kelly has? I know many do based on the number of people who email me each week when it gets cold and hot!

There are several possible reasons why a few rooms in your home might not be as comfortable as others. Let’s assume that the vent covers in the rooms are wide open, the damper controls in the branch ducts are wide open and there are no stuffed animals being held prisoners down in the ducts.

It’s important to realize that furnaces and AC units are like shoes and clothes. They are matched to the heating and cooling requirements of your home. If you buy shoes that are too small, you bet you’ll be uncomfortable. A professional heating and cooling contractor will do calculations that tell him exactly how many cubic feet per minute of conditioned air must go into each room to keep you comfortable.

The supply air duct system in your home needs to mimic the blood vessels in your body. The reason your blood pressure is the same throughout your entire body, even at your fingertip, is because the blood vessels get smaller and smaller the farther away they are from your heart.

Your main supply duct needs to do the same or otherwise, there’s not enough energy in the remaining forced air to push into the rooms at the far end of your home. If your basement is unfinished, look at your main supply duct to see if it gets smaller as branch ducts go off towards the other rooms that are comfortable.

You might be able to fix your existing supply ducts with relative ease if they’re accessible. The first step in the process is to have a contractor do the calculations to see if enough air is getting to each room. There are online help aids if you want to do this yourself. Look for a Manual J guidebook should you want to attempt to do all the calculations.

The second step is to make sure your furnace or AC units are indeed the correct sizes. A professional contractor will probably have to assist you with this. If your furnace and AC unit are sized properly, then make sure your main supply duct does get smaller and smaller. If it doesn’t, then you’ll have to modify it.

Stop Patio Algae and Moss

Question #2: Mr. Tim, can you help me? I’m in a constant battle fighting mold, mildew, and algae on my outdoor patio and sidewalks. I’m tired of scrubbing them. Is there some magic liquid I can spray on the concrete and paver brick? David L., Orlando, FL

I don’t know about you, but I have the same problem as David. On the north side of my home, I’ve got a paver stone pad outside a door from my garage. It constantly has slippery green algae I have to clean off, well I used to clean it!

Mold, mildew, algae, and who-knows-what likes to grow where they can get abundant food and moisture. Shaded patios and sidewalks can be prime candidates. These organisms will grow on vertical surfaces too such as siding and brick.

I decided to solve the problem using technology from shipbuilders of old. Go back more than 200 years and the shipbuilders used thin copper plating on the hulls of sailing ships to prevent the growth of barnacles that would create drag and slow down the ships.

Copper is a natural, safe biocide. As with most things you don’t want too much as it can cause problems. I’ve discovered a safe way to put copper on my pavers so it doesn’t leach into the pure water of the lake I live on here in New Hampshire.

I mix up about 1.75 pounds of blue copper sulfate crystals with a gallon of hot water. The crystals dissolve very fast as you stir them. I then put this solution in a standard hand-pump sprayer and apply a fine mist of the liquid just on the pavers and concrete.

I’m careful to make sure I don’t have any get in the grass and I only put on enough so it doesn’t puddle. You’ll discover it almost always soaks into the masonry in a few minutes.

After it dries, I apply more. I do this about three or four times so the copper soaks down into the surface of the masonry. The surface of the concrete does end up with a blueish color, but the color fades away in a week or two. The best part is I don’t have any algae, mold or mildew problems and neither will you!

The post Why Your House is Cold and Stop Patio Algae and Moss appeared first on Ask the Builder.

from Home https://www.askthebuilder.com/why-your-house-is-cold-and-stop-patio-algae-and-moss/ via http://www.rssmix.com/

[allardjeremyballard]

Why Your House is Cold and Stop Patio Algae and Moss

Main heating supply ducts need to get smaller the farther away they are from the furnace. Note how the large duct on the left narrows down. (C) Copyright 2018 Tim Carter

Why Your House Is Cold

Question #1: Tim, I’ve got a forced-air furnace. Several rooms in my house are cold in the winter and are hot and stuffy in the summer when the AC is on. Most of the rooms are comfortable. Why do you think this is the case? What can be done to fix it and if I build a new home how can I prevent it? Kelly S., Rochester, NY

Do you have the same heating and cooling problems that Kelly has? I know many do based on the number of people who email me each week when it gets cold and hot!

There are several possible reasons why a few rooms in your home might not be as comfortable as others. Let’s assume that the vent covers in the rooms are wide open, the damper controls in the branch ducts are wide open and there are no stuffed animals being held prisoners down in the ducts.

It’s important to realize that furnaces and AC units are like shoes and clothes. They are matched to the heating and cooling requirements of your home. If you buy shoes that are too small, you bet you’ll be uncomfortable. A professional heating and cooling contractor will do calculations that tell him exactly how many cubic feet per minute of conditioned air must go into each room to keep you comfortable.

The supply air duct system in your home needs to mimic the blood vessels in your body. The reason your blood pressure is the same throughout your entire body, even at your fingertip, is because the blood vessels get smaller and smaller the farther away they are from your heart.

Your main supply duct needs to do the same or otherwise, there’s not enough energy in the remaining forced air to push into the rooms at the far end of your home. If your basement is unfinished, look at your main supply duct to see if it gets smaller as branch ducts go off towards the other rooms that are comfortable.

You might be able to fix your existing supply ducts with relative ease if they’re accessible. The first step in the process is to have a contractor do the calculations to see if enough air is getting to each room. There are online help aids if you want to do this yourself. Look for a Manual J guidebook should you want to attempt to do all the calculations.

The second step is to make sure your furnace or AC units are indeed the correct sizes. A professional contractor will probably have to assist you with this. If your furnace and AC unit are sized properly, then make sure your main supply duct does get smaller and smaller. If it doesn’t, then you’ll have to modify it.

Stop Patio Algae and Moss

Question #2: Mr. Tim, can you help me? I’m in a constant battle fighting mold, mildew, and algae on my outdoor patio and sidewalks. I’m tired of scrubbing them. Is there some magic liquid I can spray on the concrete and paver brick? David L., Orlando, FL

I don’t know about you, but I have the same problem as David. On the north side of my home, I’ve got a paver stone pad outside a door from my garage. It constantly has slippery green algae I have to clean off, well I used to clean it!

Mold, mildew, algae, and who-knows-what likes to grow where they can get abundant food and moisture. Shaded patios and sidewalks can be prime candidates. These organisms will grow on vertical surfaces too such as siding and brick.

I decided to solve the problem using technology from shipbuilders of old. Go back more than 200 years and the shipbuilders used thin copper plating on the hulls of sailing ships to prevent the growth of barnacles that would create drag and slow down the ships.

Copper is a natural, safe biocide. As with most things you don’t want too much as it can cause problems. I’ve discovered a safe way to put copper on my pavers so it doesn’t leach into the pure water of the lake I live on here in New Hampshire.

I mix up about 1.75 pounds of blue copper sulfate crystals with a gallon of hot water. The crystals dissolve very fast as you stir them. I then put this solution in a standard hand-pump sprayer and apply a fine mist of the liquid just on the pavers and concrete.

I’m careful to make sure I don’t have any get in the grass and I only put on enough so it doesn’t puddle. You’ll discover it almost always soaks into the masonry in a few minutes.

After it dries, I apply more. I do this about three or four times so the copper soaks down into the surface of the masonry. The surface of the concrete does end up with a blueish color, but the color fades away in a week or two. The best part is I don’t have any algae, mold or mildew problems and neither will you!

The post Why Your House is Cold and Stop Patio Algae and Moss appeared first on Ask the Builder.

from RSSMix.com Mix ID 8247360 https://www.askthebuilder.com/why-your-house-is-cold-and-stop-patio-algae-and-moss/ via http://www.rssmix.com/

[andrewmawby]

Why Your House is Cold and Stop Patio Algae and Moss

Main heating supply ducts need to get smaller the farther away they are from the furnace. Note how the large duct on the left narrows down. (C) Copyright 2018 Tim Carter

Why Your House Is Cold

Question #1: Tim, I’ve got a forced-air furnace. Several rooms in my house are cold in the winter and are hot and stuffy in the summer when the AC is on. Most of the rooms are comfortable. Why do you think this is the case? What can be done to fix it and if I build a new home how can I prevent it? Kelly S., Rochester, NY

Do you have the same heating and cooling problems that Kelly has? I know many do based on the number of people who email me each week when it gets cold and hot!

There are several possible reasons why a few rooms in your home might not be as comfortable as others. Let’s assume that the vent covers in the rooms are wide open, the damper controls in the branch ducts are wide open and there are no stuffed animals being held prisoners down in the ducts.

It’s important to realize that furnaces and AC units are like shoes and clothes. They are matched to the heating and cooling requirements of your home. If you buy shoes that are too small, you bet you’ll be uncomfortable. A professional heating and cooling contractor will do calculations that tell him exactly how many cubic feet per minute of conditioned air must go into each room to keep you comfortable.

The supply air duct system in your home needs to mimic the blood vessels in your body. The reason your blood pressure is the same throughout your entire body, even at your fingertip, is because the blood vessels get smaller and smaller the farther away they are from your heart.

Your main supply duct needs to do the same or otherwise, there’s not enough energy in the remaining forced air to push into the rooms at the far end of your home. If your basement is unfinished, look at your main supply duct to see if it gets smaller as branch ducts go off towards the other rooms that are comfortable.

You might be able to fix your existing supply ducts with relative ease if they’re accessible. The first step in the process is to have a contractor do the calculations to see if enough air is getting to each room. There are online help aids if you want to do this yourself. Look for a Manual J guidebook should you want to attempt to do all the calculations.

The second step is to make sure your furnace or AC units are indeed the correct sizes. A professional contractor will probably have to assist you with this. If your furnace and AC unit are sized properly, then make sure your main supply duct does get smaller and smaller. If it doesn’t, then you’ll have to modify it.

Stop Patio Algae and Moss

Question #2: Mr. Tim, can you help me? I’m in a constant battle fighting mold, mildew, and algae on my outdoor patio and sidewalks. I’m tired of scrubbing them. Is there some magic liquid I can spray on the concrete and paver brick? David L., Orlando, FL

I don’t know about you, but I have the same problem as David. On the north side of my home, I’ve got a paver stone pad outside a door from my garage. It constantly has slippery green algae I have to clean off, well I used to clean it!

Mold, mildew, algae, and who-knows-what likes to grow where they can get abundant food and moisture. Shaded patios and sidewalks can be prime candidates. These organisms will grow on vertical surfaces too such as siding and brick.

I decided to solve the problem using technology from shipbuilders of old. Go back more than 200 years and the shipbuilders used thin copper plating on the hulls of sailing ships to prevent the growth of barnacles that would create drag and slow down the ships.

Copper is a natural, safe biocide. As with most things you don’t want too much as it can cause problems. I’ve discovered a safe way to put copper on my pavers so it doesn’t leach into the pure water of the lake I live on here in New Hampshire.

I mix up about 1.75 pounds of blue copper sulfate crystals with a gallon of hot water. The crystals dissolve very fast as you stir them. I then put this solution in a standard hand-pump sprayer and apply a fine mist of the liquid just on the pavers and concrete.

I’m careful to make sure I don’t have any get in the grass and I only put on enough so it doesn’t puddle. You’ll discover it almost always soaks into the masonry in a few minutes.

After it dries, I apply more. I do this about three or four times so the copper soaks down into the surface of the masonry. The surface of the concrete does end up with a blueish color, but the color fades away in a week or two. The best part is I don’t have any algae, mold or mildew problems and neither will you!

The post Why Your House is Cold and Stop Patio Algae and Moss appeared first on Ask the Builder.

from builders feed https://www.askthebuilder.com/why-your-house-is-cold-and-stop-patio-algae-and-moss/ via http://www.rssmix.com/

[emoryjrice71]

Why Your House is Cold and Stop Patio Algae and Moss

Main heating supply ducts need to get smaller the farther away they are from the furnace. Note how the large duct on the left narrows down. (C) Copyright 2018 Tim Carter

Why Your House Is Cold

Question #1: Tim, I’ve got a forced-air furnace. Several rooms in my house are cold in the winter and are hot and stuffy in the summer when the AC is on. Most of the rooms are comfortable. Why do you think this is the case? What can be done to fix it and if I build a new home how can I prevent it? Kelly S., Rochester, NY

Do you have the same heating and cooling problems that Kelly has? I know many do based on the number of people who email me each week when it gets cold and hot!

There are several possible reasons why a few rooms in your home might not be as comfortable as others. Let’s assume that the vent covers in the rooms are wide open, the damper controls in the branch ducts are wide open and there are no stuffed animals being held prisoners down in the ducts.

It’s important to realize that furnaces and AC units are like shoes and clothes. They are matched to the heating and cooling requirements of your home. If you buy shoes that are too small, you bet you’ll be uncomfortable. A professional heating and cooling contractor will do calculations that tell him exactly how many cubic feet per minute of conditioned air must go into each room to keep you comfortable.

The supply air duct system in your home needs to mimic the blood vessels in your body. The reason your blood pressure is the same throughout your entire body, even at your fingertip, is because the blood vessels get smaller and smaller the farther away they are from your heart.

Your main supply duct needs to do the same or otherwise, there’s not enough energy in the remaining forced air to push into the rooms at the far end of your home. If your basement is unfinished, look at your main supply duct to see if it gets smaller as branch ducts go off towards the other rooms that are comfortable.

You might be able to fix your existing supply ducts with relative ease if they’re accessible. The first step in the process is to have a contractor do the calculations to see if enough air is getting to each room. There are online help aids if you want to do this yourself. Look for a Manual J guidebook should you want to attempt to do all the calculations.

The second step is to make sure your furnace or AC units are indeed the correct sizes. A professional contractor will probably have to assist you with this. If your furnace and AC unit are sized properly, then make sure your main supply duct does get smaller and smaller. If it doesn’t, then you’ll have to modify it.

Stop Patio Algae and Moss

Question #2: Mr. Tim, can you help me? I’m in a constant battle fighting mold, mildew, and algae on my outdoor patio and sidewalks. I’m tired of scrubbing them. Is there some magic liquid I can spray on the concrete and paver brick? David L., Orlando, FL

I don’t know about you, but I have the same problem as David. On the north side of my home, I’ve got a paver stone pad outside a door from my garage. It constantly has slippery green algae I have to clean off, well I used to clean it!

Mold, mildew, algae, and who-knows-what likes to grow where they can get abundant food and moisture. Shaded patios and sidewalks can be prime candidates. These organisms will grow on vertical surfaces too such as siding and brick.

I decided to solve the problem using technology from shipbuilders of old. Go back more than 200 years and the shipbuilders used thin copper plating on the hulls of sailing ships to prevent the growth of barnacles that would create drag and slow down the ships.

Copper is a natural, safe biocide. As with most things you don’t want too much as it can cause problems. I’ve discovered a safe way to put copper on my pavers so it doesn’t leach into the pure water of the lake I live on here in New Hampshire.

I mix up about 1.75 pounds of blue copper sulfate crystals with a gallon of hot water. The crystals dissolve very fast as you stir them. I then put this solution in a standard hand-pump sprayer and apply a fine mist of the liquid just on the pavers and concrete.

I’m careful to make sure I don’t have any get in the grass and I only put on enough so it doesn’t puddle. You’ll discover it almost always soaks into the masonry in a few minutes.

After it dries, I apply more. I do this about three or four times so the copper soaks down into the surface of the masonry. The surface of the concrete does end up with a blueish color, but the color fades away in a week or two. The best part is I don’t have any algae, mold or mildew problems and neither will you!

The post Why Your House is Cold and Stop Patio Algae and Moss appeared first on Ask the Builder.

[olivereliott]

Motorworks’ Ducati 900: The SuperSport revival continues

Ducati’s back catalog is littered with hits and misses. Consider the Ducati 900 SuperSport: the early 1990s version is a classic beauty; the early 2000s version, not so much.

Pierre Terblanche‘s 1998 revamp of the 900SS was an acquired taste, and hasn’t dated well. So it’s in no danger of becoming an overpriced collector’s item.

For now, you can still pick one up for under $3,000 in the States, peel back the layers, and enjoy a custom bike with decent performance. Which is probably why so many Ducati 900SS projects have been creeping out of the woodwork lately.

This latest example comes out of Rochester, NY, and it’s the first Ducati build by Sean Pelletier, sole proprietor of The Motorworks.

“I’ve historically built Japanese vintage bikes,” he explains, “but when I started playing with Italian v-twins, I fell in love with the way they make power and the no frills design. This was an exercise in reducing weight and seeing what I could build in-house.”

The donor was a 2001-model 900SS, with an older motor wedged in. And it was in a state. “The previous owner liked wheelies and hated routine maintenance,” explains Sean, “so it needed a thorough going-through.”

Sean often calls in his friend Toby to help with engine work. Toby stripped the 900’s motor, inspected everything, and replaced anything that wasn’t within spec. “I got a lot of info from Bruce Meyers about those motors,” says Sean. “Things not in the shop manuals. So I would consider it a semi-blueprinted engine built to be ridden pretty hard.”

The cylinders were rebored and plated, and fitted with 94mm Pistal Racing pistons—pushing the displacement out to 944 cc. The guys also installed new valves, recut the seats, then installed a Barnett clutch assembly. They built covers for the clutch, belt and sprocket out of carbon, and ditched the air box in favor of a pair of pod filters.

Sean didn’t wedge the hot-rodded motor back into the original frame though. Instead, he picked up a truly exotic upgrade: a Walt Siegl Leggero frame. “His shop is about five miles from where I grew up, and I went to high school with his lead fabricator. I visited, and was really impressed with how light and small the Leggero was.”

All that was needed now was a redesigned subframe to hold the tail section Sean planned to build. “I welded on two side frame mounts and brazed on some weld nuts and that was it,” he says. “Working with Walt’s frame was so much nicer than spending hours grinding pounds of steel tabs and mounts off stock frames.”

Sean hooked the chassis up to a set of Suzuki GSX-R750 forks, using custom triples CNC machined in-house. The forks were resprung and fitted with Race Tech ‘Gold’ valves.

The 900SS’s stock Öhlins shock felt great out the box, so it was left alone. And the donor came with upgraded front brakes, so there was no need to swap those out either. Sean simply switched the master cylinders for Brembo units, to improve braking feel.

All the bodywork is Sean’s handiwork—starting with the carbon fiber fairing and tail section. It’s the first time he’s shaped with carbon fiber, and that meant a steep learning curve. “To make nice, light parts, you need to build them in a flawless mold,” he explains.

Step one was to mock up the shapes with steel wire and a MIG welder (“sort of sketching in 3D”). Sean then took photos and measurements, used 3D software to create the final design, and CNC cut molds from high-density urethane foam. Then he coated the molds in primer, polished them, and shaped up a final set of molds from fiberglass. The carbon was then vacuum infused.

“Aside from the design time,” says Sean, “building patterns this way is much faster than older techniques and hand carving. Ironically though, weeks before going to the 2017 Handbuilt Show, I got an itch that the front fairing wasn’t shaped the way it should be.

“I reworked the patterns with thickened bondo, wood carving tools and sandpaper, because I didn’t want to completely throw away what I already had done. So the bike is still a mix of old and new techniques.”

Sean has way more experience bending metal, so he opted for aluminum for the tank. The metalwork was done with an English wheel that Sean built himself, along with a small electric power hammer and hand tools.

The number of one-off pieces on this Ducati is staggering. Sean machined up a whole stack of aluminum parts, including the gas cap, rear-set hangers, heel guards, muffler caps and fairing mount bracket.

The taillight and license plate arrangement is custom too, and is kitted with lighting from Dime City Cycles. Then there’s that exhaust; hand-made stainless steel headers, flowing into hand-made mufflers, wrapped in carbon fiber with a high heat resin.

There’s a lot of practical thought too. The custom clip-ons can be adjusted up and down just by rotating them. And the foot controls were built with a locating pin, which can be moved to adjust the angle in 12-degree increments.

The handlebar switches are also custom, with the throttle reel integrated into the right side cluster. And there’s an RFID keyless ignition from Motogadget integrated into the top tripe clamp. “If I can find something on the market that I really like, I use it without fail,” says Sean. “But when that doesn’t happen, I wind up spending (probably a bit too much) time making my own.”

The Ducati’s new speedo takes this philosophy to the extreme. Sean had a really specific look in mind—and couldn’t find something off-the-shelf to match it. So he built his own housing, designed the circuitry, and programmed an Arduino microcontroller kit to drive an analog needle and run the LCD display.

Naturally, Sean tackled the upholstery and paint too. “I get to use this cool old Singer 29-4 treadle machine I got from my grandfather,” he says, “He used it to repair saddles and it works like a charm for thick vinyl and leather.”

“I also did the paint—there weren’t any available bike painters in town. My shop is hardly clean enough to do A-plus work, but at a pinch, I can do it—and wet sand and polish out any bugs that land in the clear.”

It looks very good from where we’re standing. And apparently it goes well too—Sean’s been using it as both a show bike and a track day weapon.

“It’s quite a blast on the track,” he reports. “I love how well it handles, the light weight helps keep the speed up through corners and chicanes.

“I’m now planning on building a dedicated track bike based on this design, with a more developed engine and lighter weight. I estimate I can get the track bike down to less than 300lbs.”

Well…we’re waiting.

Images by Michael Hanlon