Tumgik
#ascorbic acid to remove chlorine
aqualiseshowerfilter · 5 months
Text
The Ultimate Guide to Shower Filters to Remove Toxic Chemicals
Discover the secrets to healthier showers with our comprehensive guide on shower filters! Learn how to remove toxic chemicals, combat hard water, and improve hair and skin health. Dive in for expert advice and make every shower a rejuvenating experience.
Water purification systems When it comes to maintaining a healthy lifestyle, water plays a crucial role. We use water not only for drinking but also for various household activities such as cooking, cleaning, and bathing. However, what most people are not aware of is that the water coming into our homes may contain harmful chemicals and impurities that can have negative effects on our health.…
Tumblr media
View On WordPress
0 notes
molsons112000 · 3 months
Text
They found that there's many benefits to taking vitamin C Metformin together.... The benefits are your less likely to develop complications related to type two diabetes... Now the study below show taking 500 mg of vitamin C with your Metformin. Now also remember vitamin c cleans the chlorine out of your system. So if you're drinking water, some water has chlorine in it and if you swim in swimming pools, you get exposure, the chlorine your body. So taking vitamin c, remove the chlorine from your system.... So yes swimmers should take vitamin c.
A 2017 study found that patients taking metformin and ascorbic acid were twice as likely to reduce HbA1c and ten times more likely to reduce risk factors for long-term diabetes complications than patients taking metformin alone.
"Finding
Patients with metformin and ascorbic acid (parallel arm I) was twice more likely to reduce HbA1c than metformin alone (control arm) in a year (OR 2.31 (95% CI 1.87–4.42) p < 0.001). Also Parallel arm I was ten times more likely to reduced risk factors contributing to long-term diabetes complications than participants of arm II in a year (OR 10.38 (95% CI 6.91–15.77) p < 0.001). In contrast, parallel arm II patients were seven times more effective to reduce the risk of expected CVD development in 10 years than arm I (OR 7.54 (95% CI 3.76–10.32) p < 0.001).
Conclusions
The trial concluded that ascorbic acid with metformin is more effective against reducing risks for diabetes related long-term complications (including ACR)."
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5556597/
National Institutes of Health (NIH) (.gov)
https://www.ncbi.nlm.nih.gov › pmc
Combined effect of metformin with ascorbic acid versus acetyl ...
by SW Gillani · 2017 · Cited by 50 — Recruited patients were given Ascorbic Acid 500 mg (Sundown vitamin c-500) once daily (Blinded) in
https://www.google.com/search?ie=UTF-8&client=ms-android-comcast-us-rvc3&source=android-browser&q=How+much+vitamin+C+should+you+take+with%3F+Your+dose+of+metformin
Does vitamin C remove chlorine from the body?
Vitamin C doesn't only eliminate Chlorine but also works to reverse any negative effects Chlorine has already had on the body such as weak brittle hair or dry itchy skin.
https://aromasenseusa.com › blog
Vitamin C Chlorine Removal - Aroma Sense USA
How long does it take for vitamin C to remove chloramine?
… that 1000 mg (1 gram) of pure Ascorbic Acid is required to remove 1ppm of chloramine in a medium-size (50 gallon) bathtub, if allowed to sit for 4-8 minutesMar 19, 2021
https://www.quora.com › Does-vita...
Does vitamin C dechlorinate water? - Quora
Ascorbic acid (vitamin C) and sodium ascorbate completely neutralize both chlorine and chloramine, but degrade in a day or two, which makes them usable only …
https://en.wikipedia.org › wiki › C...
Chloramination - Wikipedia
https://www.google.com/search?ie=UTF-8&client=ms-android-comcast-us-rvc3&source=android-browser&q=How+vitamin+c+removes+chlorine+from+your+Circulatory+system
Some people that are exposed to chlorine or chlorine gas, such as people who are in swim teams like my partner David Kudo son Matt Who trains in all boys swim team, which is black...
So in those dolphin swim academies, they should recommend the parents give these vitamins to their children that are six months to age five...
"The government recommends all children aged 6 months to 5 years are given vitamin supplements containing vitamins A, C and D every day.
https://www.nhs.uk › baby › vitam...
Vitamins for children - NHS"
"Vitamin C supplements for infants and children under 1 year of age need about 20 mg per day. Children over 1 year old need to tolerate 30-40 mg per day.
https://www.vinmec.com › pediatrics
Instructions for supplementing vitamin C for children - Vinmec
Toddlers ages 1 to 3 years old need 15 mg of vitamin C a day and older children ages 4 to 8 years old need 25 mg a day.Jan 25, 2023
https://www.babycenter.com › vita...
Vitamin C for kids and toddlers: How much they need"
https://www.google.com/search?ie=UTF-8&client=ms-android-comcast-us-rvc3&source=android-browser&q=Can+babies+take+vitamin+c+supplement
Wikipedia
https://en.wikipedia.org › wiki › L...
List of swim clubs
List of swim clubs ; Australian Paralympic Swim Team · Australian Swim Team · Bondi Icebergs Club ; City of Southampton Swimming Club
https://www.google.com/search?q=A+list+of+swin+clubs+around+the+world&client=ms-android-comcast-us-rvc3&sca_esv=834bffafef9a94bd&sca_upv=1&source=android-browser&ei=AAl2Zum6C5nbptQPw7SL0AY&oq=A+list+of+swin+clubs+around+the+world&gs_lp=EhNtb2JpbGUtZ3dzLXdpei1zZXJwIiVBIGxpc3Qgb2Ygc3dpbiBjbHVicyBhcm91bmQgdGhlIHdvcmxkMggQABiABBiiBDIIEAAYgAQYogQyCBAAGIAEGKIEMggQABiABBiiBDIIEAAYgAQYogRIpUFQ4BdY-ThwA3gAkAEAmAFvoAHkA6oBAzIuM7gBA8gBAPgBAZgCB6ACzQPCAggQABiiBBiJBZgDAIgGAZIHAzQuM6AHkxI&sclient=mobile-gws-wiz-serp
Here's the international olympic committee and they can come down with standards of care for athletes. Yes, they can come down with minimum standards of care for different athletes, indifferent types of sports like swimming and diving. Like taking so much vitamin c per day to help offset the effects of chlorine....
Olympics
https://olympics.com › contact-us
International Olympic Committee - History, Principles & Financing
International Olympic Committee. Contact us. Contact us. olympic-house-1. International Olympic Committee (IOC). Registered office
https://www.google.com/search?ie=UTF-8&client=ms-android-comcast-us-rvc3&source=android-browser&q=Contacting+the+international+olympic+swim+committee
According to Drugs.com, no interactions have been found between metformin and vitamin C, but this doesn't necessarily mean that none exist. In fact, some studies have found that taking vitamin C and metformin together can be well tolerated and may even have therapeutic benefits:
A 2011 study found that vitamin C supplementation with metformin was well tolerated and may be a useful treatment for type 2 diabetes. The study also found that vitamin C supplementation improved glycemic control.
A 2017 study found that patients taking metformin and ascorbic acid were twice as likely to reduce HbA1c and ten times more likely to reduce risk factors for long-term diabetes complications than patients taking metformin alone.
NCBI
Supplementation of Vitamin C Reduces Blood Glucose and Improves Glycosylated Hemoglobin in Type 2 Diabetes Mellitus: A Randomized, Double-Blind Study - PMC
...
0 notes
Text
Phil’s Daily Wisdom
Don't be afraid of DHMO - Dihydrogen Monoxide
Yes, it is the:
Number 1 cause of ALL drowning deaths
Number 1 cause of ALL Erosion
Industrial Solvent that can even dissolve rock given enough time
It is in ALL of our food
It is used in ALL forms of manufacturing
It can cause excessive property damage
AND MORE!!!!!!!!
There are WEBSITES that tell about the HORRORS of Dihydrogen Monoxide
It was nearly banned by a city in Califorina!
SCARED YET OF DIHYDROGEN MONOXIDE?
DIHYDROGEN chemical formula is H2
MONOXIDE chemical formula is O
Put them together H2O
That's water y'all.
And yes, a small town in Californian nearly banned the substance because none of the city council knew what it was. Someone asked, "Isn't that just water" and so they banned sytrofoam cups at city events instead to save face.
Just because you cannot pronounce a word or it has a long name does not mean it is harmful or dangerous.
L-Ascorbic acid (Vitamin C)
Cholecalciferol (Vitamin D)
Pyridoxine (Vitamin B6)
Cyanocobalamin (Vitamin B12)
Every plant has a scientific name (Latin Name), a common/general name, as well as folk names. If you see the Latin Name don't freak out.
I see this a LOT in the magickal community - people don't understand a bgi word and get scared.
Don't buy into the crap that margarine is 1 molecule away from plastic. First off there are a LOT of different forms of plastics and each have their own chemical formula. Just because a substance has the same chemical formula as another does not mean they are the same. Diamonds are CARBON ... so is coal. If you take coal, put it under enough pressure and heat it can form a diamond. The chemical bonds between the carbon atoms make all the difference. Cabon has 4 bonding points. It can bond to itself 3 times. Due to the position of the bonds it cannot bond to itself a 4th time.
In chemistry a SINGLE ELECTRON can turn an explosive substance into a condiment.
Sodium is a metal. It is a VERY reactive metal. It EXPLODES when it comes in contact with water. It is missing 1 electron in its outer most shell and REALLY wants that extra electron and will STRIP it from other substances.
Chlorine is a color, odorless, and deadly gas. Mustard gas has chlorine. It has 1 electron in its outer shell that it doesn't want.
When Sodium and Chlorine get together the chlorine shares its electron with the sodium atom. The chlorine is happy because it no longer has excess baggage. The Sodium is super happy because its outer electron shell is full.
Together they make salt ... NaCl ... the most common seasoning.
Either atom by itself will kill you.
NaCl is a compound.
A molecule is a group of two or more atoms held together by chemical bonds. A compound is a substance which is formed by two or more different types of elements which are united chemically in a fixed proportion. All molecules are not compounds. All compounds are molecules.
Plastic is a long chain carbon compounds some have over 10,000 carbon atoms and other atoms chained together.
Sugars basically have the same base chemical composition: C6H12O6 but the carbon, hydrogen, and oxygen atoms combine in different ways to create different natural sugars. Not all sugars metabolize the same way.
One last comment ... the addition or removal of an atom can cause major changes.
H2O - water
H2SO4 - sulfuric acid
There was a rhyme I learned in chemistry, “Willy was a chemist, but Willy ain't no more, what Willy thought was H2O was really H2SO4.”
0 notes
markettrendus · 2 years
Text
Bleaching Chemicals market to grow to reach USD 850.1 Million in 2022 and is estimate to reach USD 1365.1 Million by 2030
Global Bleaching Chemicals market to grow to reach USD 850.1 Million in 2022 and is estimate to reach USD 1365.1 Million by 2030 with a CAGR of 6.10% during the period 2022E-2028F due to coronavirus situation.
Bleaching Chemicals Market Overview
The Global Bleaching Chemicals market Report provides a detailed exploration of market size, regional and country-level market size, division market development, market share, competitive Landscape, deals investigation, effect of homegrown and worldwide Bleaching Chemicals market players, esteem chain enhancement, exchange guidelines, late turns of events, valuable open doors examination, vital market development Analysis, item dispatches, region commercial center extending, and technological innovations.
Click here for sample copy of this report @ https://market.biz/report/global-bleaching-chemicals-market-99s/960197/#requestforsample
Tumblr media
What are bleaching chemicals?
Bleaching chemicals are used to remove color from a material. The most common bleaching agent is chlorine, which is used to bleach paper and cloth. Bleach can also be made from other chemicals, such as oxygen, hydrogen peroxide, or sodium hydroxide. These bleaches are typically used for industrial applications such as bleaching wood pulp or textile fibers.
How do bleaching chemicals work?
Bleaching chemicals are used in a variety of industries, from laundry and textile production to papermaking. But how do these chemicals actually work?
Bleaching chemicals work by breaking down the bonds between molecules, which bleaches or whitens the material. The most common bleaching agent is chlorine, which breaks down into hypochlorous acid when it comes into contact with water. This acid then reacts with the molecules in the fabric or paper, breaking them down and causing the bleaching effect.
Other bleaching agents include oxygen bleach (peroxide), which works in a similar way to chlorine bleach but is less harsh on materials; and sodium hydroxide (caustic soda), which breaks down into sodium ions when it comes into contact with water.
The global bleaching chemicals market is driven by the growing demand for bleached pulp from the paper industry. The players: who are the key manufacturers?
Key drivers and trends
The market is driven by factors such as the increasing demand for bleached pulp, growing end-use industries, and strict environmental regulations. However, the high cost of raw materials with bleaching chemicals are restraining the growth of this market.key players 3M, BASF, Akzo Nobel, Aditya Birla Chemicals, Kemira Oyj, Hercules and Hercules Inc., Hansol Chemicals
Get Advantages of Direct Purchasing @ https://market.biz/checkout/?reportId=960197&type=Single%20User
Market Segment by Type
Azodicarbonamide, Hydrogen peroxide, Ascorbic acid, Acetone peroxide, Chlorine dioxide, Others
Market Segment by Application
Pulp & Paper, Water Treatment, Textile, Construction, Healthcare, Electronics, Food & Beverage, Others
You might also like:
https://www.einpresswire.com/article/587691586/chilean-pisco-market-report-top-companies-new-technology-demand-and-opportunity-2022-2030
https://www.einpresswire.com/article/587693098/alfalfa-hay-pellets-market-size-analysis-competitive-strategies-and-forecasts-2022-2030
https://www.einpresswire.com/article/587694786/global-mortgage-lender-market-report-2022-with-covid-19-impact-analysis-forecasts-to-2030
https://www.einpresswire.com/article/587695166/global-augmented-analytics-market-key-industry-players-and-their-scope-2022
https://www.einpresswire.com/article/587695524/customer-relationship-management-crm-system-market-report-top-companies-new-technology-demand-2022-2030
https://www.einnews.com/pr_news/589045491/detailed-analysis-of-refrigerated-containers-market-business-growth-development-factors-future-trends-till-2030
https://www.einnews.com/pr_news/589047892/exclusive-report-on-tumor-industry-market-size-will-witness-substantial-growth-by-2030
https://www.einnews.com/pr_news/589048370/incredible-growth-of-linear-devices-market-2022-by-share-growth-segments-revenue-and-top-manufacturers-analysis
https://www.einnews.com/pr_news/589048684/workable-strategic-report-on-commercial-interior-design-market-by-trend-forecast-to-2030-with-covered-top-companies
https://www.einnews.com/pr_news/589049172/new-technology-developments-in-eam-software-market-to-grow-during-forecast-year-2022-2030
https://www.einnews.com/pr_news/589049868/insights-on-the-global-stain-remover-market-to-2022-industry-statistics-emerging-demands-forecast-to-2030
https://www.einnews.com/pr_news/589762050/global-new-media-market-perspective-on-the-current-scope-future-strategies-2030
https://www.einnews.com/pr_news/589762775/global-corded-phones-market-latest-analysis-of-key-players-and-growth-forecast-by-2030
https://www.einnews.com/pr_news/589763668/global-brake-fluid-market-to-witness-widespread-expansion-2030
https://www.einnews.com/pr_news/589764405/global-lady-bags-market-growth-insights-development-statistics-industry-segments-to-2030
https://www.einnews.com/pr_news/589765029/global-data-infrastructure-market-development-share-and-latest-revenues-analysis-by-2030
https://www.einnews.com/pr_news/589765802/global-biologic-products-market-sees-promising-growth-future-strategic-planning-and-forecast-to-2030
https://www.einnews.com/pr_news/589766541/global-beer-cider-market-growth-strategies-key-player-analysis-and-forecast-2022-2030
0 notes
riseball33 · 2 years
Text
42 Day Fasting
I did this fast in my twenties (~24yo) and had amazing health benefits I’d like to share. It was not easy and I’ll explain why. I ate lots of junk food in my teens, pop, chips, slurpees (I was addicted), and lots of processed foods. I was an athlete but didn’t like how I felt or how my skin looked. I had acne breakouts on my back, shoulders and face.
So I wanted a reset to regain my health. I was finally living on my own and tried this program I paid for online FCI (Fasting Center International). It was expensive but actually worked very well. To this day it has been the biggest physical impact I’ve tried to restore my health.
So the idea is you fast (not eating), but I believed at the time I couldn’t even go a day without eating, let alone meat. So it starts by doing 5 preliminary days eating a large fruit salad for lunch and a veggie salad for dinner. In between you can drink as much of the following, fresh juices, homemade vegetable broth or herbal teas. When the fast starts, the idea is it’s a juice fast so you are getting a lot of nutrients from that among other supplements.
Fast Daily Routine
3 enemas a day (I only did mornings and evenings)
Alternate juicing (16 oz), tea and veggie broth every 2 hours
Teas are alternating (chamomille, peppermint and a fruit tea)
Veggie broth is good for two days and just boil it to get all the nutrients out.
After to strain it using a gold coffee filter for both juicing (get a juicer) or the broth. The idea here is to remove the pulp so it doesn’t stimulate the hunger response when you drink. Believe it or not feeling hungry was not a problem.
Veggie broth boil (8 ingredients)(dark green leafy like kale, spinach or Swiss chard)(red potatoes, carrots, mushrooms, broccoli, red cabbage, celery, and red beets)
I would also suppliment in the morning with a liquid mineral suppliment, and a vitamin suppliment (with vit.K) as well as 2000mg of ascorbic acid powder (vit.C)
All ingredients should be organic and in theory the juicing should be fresher the better. However, I also cheated a bit and bought some store organic juices to get by but it got really expensive. This isn’t necessarily cheap, but you do save a lot by not eating.
About my experience, I ended up doing my first fast for 42 days. Like I said I didn’t think I’d last even 3 days without food. Truthfully the hardest part was other people, avoiding social situations and not eating in front of people like when they bring in pizza to the office. Also, I did lose some weight but by the end I felt like a new person revitalized. The start was the hardest getting past the first week, I had no coffee, caffeine or sugar now except the juicing so I had 3 days of pounding headaches for the caffeine and 5 days of more dull sugar withdrawals headaches. After that the headaches were gone. The first enema I did didn’t last long, I’m supposed to take in 2 liters and hold 20minutes. The smell was so foul, to this day I couldn’t believe what came out. The enemas I believe I add some chamomille tea helps to calm the colon and the water should be fresh spring not tap water (chlorine). I got into a routine and felt good I was improving my health daily, it really helped me keep going. I started to sleep better and consistent going to bed at 9pm and up at 6am before work. I did get obsessed with the FoodTv channel I won’t lie 😊. Anyways after like 3 weeks I was getting major acne breakouts from toxins leaving and the vit.C after that my skin looked brand new. Every morning to use a spoon to scrape the crud off my tongue and do a light back brush over the whole body. My sense of smell got really strong, I grew up with my parents both smoking and couldn’t believe how bad my sense of smell had gotten. I also remember some crazy stuff come out with the enemas, you know when you stop eating that whatever comes out is old shit, lol. I had lots of little stuff, parasites, and at one point a large hookworm came out. I was shocked that was in me, it seemed I’d go a few days okay, then one day my mood was off and then something like that would come out. At the end I could probably have gone longer, they said to try and go back to the black tar like a babys first stool looks like but I was ready. It was hard eating again afterwards and I had to go slow. I think I was pretty much vegan for six months after. One thing that I remember was the sleeps were so peaceful after a while, my thinking was on a completely different level, its hard to explain how much energy we use to digest food all the time. My energy levels increased I wasn’t lethargic anymore and my skin was clear and eyes white when I was done. I learned a lot about my body and what it does to release toxins (you feel worse before better usually). The best part was walking to work some days and noticing my stomach just didn’t hurt, it was fine even though it was empty it was like it got a break. I can still remember smelling the bakery from two blocks away walking in to work every morning, it was heavenly. And my taste became more acute, I didn’t realize how sweet carrots were before. Anyways I hope this can help someone one day, which is why I am sharing. Good luck with your health and healing journey.
0 notes
Text
Activity 3: part 2.5
2. Post an image from the web, the chemical systematic (IUPAC) name, common name, and the molecule formula for 20 chemicals that you use or eat (continued)
Acetic acid - Acetic Acid - Vinegar - CH3COOH
Tumblr media
Magnesium Hydroxide - Magnesium Hydroxide - Antacid - Mg(OH)2
Tumblr media
Sodium Hypochlorite - Sodium Hypochlorite - Bleach - NaOCl
Tumblr media
Ethanol - Ethanol - Alcohol - C2H5OH
Tumblr media
Aluminum Chlorohydrate - Aluminum Chlorohydrate - Antiperspirant - Al(n)Cl(3n-m)(OH)m
Tumblr media
Calcium carbonate - Calcium Carbonate - Chalk - CaCO3
Tumblr media
Magnesium Sulfate - Magnesium Sulfate - Epsom Salt - MgSO4
Tumblr media
Aspartame -  N-(L-α-Aspartyl)-L-phenylalanine, 1-methyl ester - Artificial sweetener - C14H18N2O5
Tumblr media
Silicon Dioxide - Silicon Dioxide - Sand - SiO2
Tumblr media
Ascorbic acid - (5R)-[(1S)-1,2-Dihydroxyethyl]-3,4-dihydroxyfuran-2(5H)-one - Vitamin C - C6H8O6
Tumblr media
3. Look over your molecules and the bonding characteristics, how many bonds does each of the following elements typically have?  Carbon? Hydrogen? Oxygen? 
 Carbon usually forms 4 bonds, Hydrogen usually forms 1 bond, and Oxygen usually forms 2 bonds
4. What does IUPAC stand for?
IUPAC stands for the International Union of Pure Applied Chemistry
5. As you explore ingredients, notice how everything around us is made up of chemicals consisting of atoms bound together into molecules.  But what about companies that claim their products are chemical free! How can this be?  Here is an example:
http://www.naturalhealthcareproducts.com/Cleaning-Products.php
Do a little web searching and propose what chemicals are actually in this product. Keep in mind, that everything at the molecular level is a chemical, whether it be made in nature or in a lab.
Technically, there is nothing that is completely “chemical free.” Chemicals aren’t necessarily a bad thing though; chemical compounds make up most of what we use and consume in our day-to-day lives. Upon looking at the website for this product, even some of the things that it boasts are “chemical free” are in fact chemicals: the “chlorine scavenger” may get rid of chlorine, but it is actually a modified, liquid sodium bisulfite formulation. A “Scavenger” itself is a chemical substance added to a mixture in order to remove or de-activate impurities and make sure no unwanted reactions occur. So, no, it’s not entirely chemical free.
6. Also do a little searching on the web and share on your blog how many chemicals are typically found in things like coffee, milk, beer or whiskey?  Only need to choose one.
Apparently, milk is a cocktail of all sorts of chemicals. Many people believe that milk is very good and wholesome for you, and it is - in its raw form. However, after it’s been through the pasteurization process and is put into containers and eventually makes its way to your glass, it is far from pure. When tested, medications like anti-inflammatories (niflumic acid, mefenamic acid, ketoprofen, diclofenac, phenylbutazone, naproxen, flunixin, diclofenac), antibiotics (forfenicol), Natural hormones (estrone), sex hormones (17-beta-estradiol), steroid hormones (17-alpha-ethinylestradiol), anti-malaria drugs (pyrimethamine), and antifungal drugs (triclosan). Some of these existed already in the milk producer’s body (human or not), but some of them were added via an outside source. Some dairy farms routinely give drugs to their cows, even though high levels of added hormones and antibiotics is illegal. Also, one doesn’t want high levels of those things in your milk, since they’re actually quite harmful to your health.
1 note · View note
lauraisasurvivor · 3 years
Text
Day 18-19: Merge feast!
It’s a little early for a normal season of Survivor, but not unheard of...I celebrated the merge feast this weekend! The Lions Club has a convention every year which ends in a themed party on Friday and Saturday night. Each local chapter has a room with different decorations and food. This year it was Elvis, but it seemed like our group was the only ones dressed up! I had a poodle skirt. I bought my dad a $15 wig on Amazon which was just what you would expect out of a cheap wig. And I ate! No cheese, but pulled pork and a hot dog and pancit and chocolate. Of course, I wasn’t starving, so I didn’t gorge myself like they do on the show. Actually, I was able to stop eating and left a lot on my plate if I didn’t like something. A big difference from the Laura of a year ago! Happily, I do not feel sick today, like I did after the cheese incident last week.
My brother and I split Hulu so I’ve been watching Futurama. And the rest of the Inuyasha episodes that even Crunchyroll doesn’t have. But I’m more bored by TV lately. Now that I’ve been moving, I want to get up and move more! I went on a 5 mile bike ride today for my immunity challenge. I was a bit sore but over it quickly, 5 miles isn’t that far. But a lot further than I’ve been riding the past few years. 
I’ve also been buying stuff to prepare for my new swimming workout adventure. While searching for chlorine-removing shampoo and soap, I discovered that the main ingredient to get off chlorine is Vitamin C. So instead of buying a bunch of expensive products, I bought a jar of ascorbic acid (the chemical name for Vitamin C.) I guess you can dissolve it in water, throw it in a spray bottle and use it on your hair and skin prior to your normal shampoo. Saves me a lot of money! I’ll let you know how it works.
Happy spring! The sun was directly over the equator today at 10:33 am. 
I know I talked about my obsession this year with the solar and lunar calendar a few days ago. I think about equinoxes and solstices - especially the winter solistice, since Christmas has taken over winter solistice celebrations - and am trying to learn more about other points on the wheel of the year (like Samhain.) Apparently Groundhog Day is another one. Maybe I should become a neopagan. But really, I just like having days to celebrate all throughout the year-I’d rather that than concentrating on them all in November and December like we do. I heard that some Native American tribes have a celebration every full moon. It would really suck to be a woman in such a tribe who happened to have her period every month! But I love the idea of a monthly celebration with my friends. Let’s make it happen!
0 notes
Text
Iris Publishers-Journal of Archives of Pharmacy & Pharmacology Research-Is there any Relation Between Glucose in Urine with Music Listening During Travel?
Tumblr media
Author by  Maria Rizvi
Abstract
Music can be found almost everywhere being used for entertainment. People also listen to music while traveling. Glucose appears in urine due to hyperglycemia. Basic purpose of this study is finding any relationship between urine glucose and music listening during travel. Urine test was performed for this purpose. 5% students have glucose in urine and like music in their journey. 77% students also like music but have no glucose in urine. 18% students don’t like music and have no glucose in urine. Glucose in urine has no relation with music listening during travel.
Keywords: Hyperglycemia; Music listening
Introduction
Music is used everywhere for entertainment purpose. It can be played at work, home, gym, restaurant, cafes and during travel. People listen to music even for hours. Recent technology of mobiles has made access to music easier than before. As now people can listen to music wherever they are going and these days individuals are spending more time and money on it [1]. Music listening while traveling is a popular activity which is increasing day by day. Approximately 90% of the transport has musical manifestation. It influences a person traveling in a stress condition. Soft music helps to get rid off from anxiety and feel relaxed. But hard rock or heavy metal music puts negative effect on one’s mood [2]. Renal damage of proximal tubules or hyperglycemia causes glucosuria. Normally, all the filtered glucose is reabsorbed by these proximal tubules. Diabetes mellitus and stress causes hyperglycemia. Glucose starts appearing in urine when ultrafiltrate concentration and blood concentration increase from the absorption level of proximal tubules. Detection of glucose is done by enzymatic reaction of glucose oxidase that is specified for glucose. Shelf life of reagent pads is limited. So sunlight protection should be given. If concentration of glucose is low and ascorbic acid is in high concentration in urine than ascorbic acid interferes with this test and false negative results are produced. Formaldehyde also produces false negative results. For false positive results, sample must be contaminated with hypochlorite, chlorine or hypochlorite [3]. Basic purpose of this study is finding any relationship between urine glucose and music listening during travel.
Materials and Methodology
Required equipment for this test is gloves, urine sample, test strips, watch, clean surface, tissue paper and waste bag. Test was performed on hundred students selected randomly. Gloves were put on before starting the test. Test strip was completely soaked in urine for 2 seconds and then it was extracted from the container having urine sample. To remove the excess urine from the strip it was supported on the container’s mouth. Strip was placed on tissue paper to avoid mixing color pads. Time was observed through watch. About after one minute, reactions on reagent strip were appeared. Then this strip was matched with colors of strip container and all the results were recorded. After that all the used materials were thrown in the waste bag and hands were washed completely. Positive results mean there is some abnormality in the person. While negative results mean the person is normal.
Result
Relation of music listening while traveling with urine glucose is provided in Table 1. About 2% male students and 3% females like music and have glucose in urine while14% males and 63% females also like music but they don’t carry glucose in their urine. On the other side, 5% males and 13% females don’t like music during travel and have no glucose in urine (Table 1).
Table 1: Relation of urine glucose with listening to music while traveling.
Conclusion
Urine glucose has no affinity with music listening while traveling.
Acknowledgement
None.
Conflict of Interest
No conflict of interests.
Read More: Full Text
For More articles in Archives of Pharmacy & Pharmacology Research
For more open access journals in Iris Publishers
0 notes
yohib · 3 years
Text
Starting with Seeds
Tumblr media
It is most satisfying when you plant a seed and nurture it until it becomes a full-grown plant and provides you with the expected harvest. Of course, it takes more effort to grow a plant from seed than it does from a seedling, you need to decide if this is your preferred method and discover the best way of starting seeds. Hydroponics is an excellent system for starting seeds as you have complete control over the elements your seeds are exposed to.
Seeds vs. Seedlings
For your first attempt at hydroponics, it is quicker to plant seedlings. However, controlling all the elements of the growing process includes controlling the seeds. If you decide to plant seeds, you will have complete control over the type and quality of the seed you plant. Put simply, you can have any variety of seed but not necessarily any variety of seedling. Seeds are generally easier to get hold of then seedlings. The other consideration is the growing media. In hydroponics, you avoid using soil. However, unless you have a hydroponic center near you, the seedlings you purchase are likely to be grown in soil. This means carefully removing the soil to avoid contamination of your system. Unfortunately, washing them can damage the roots of the seedling. Besides, seeds are cheaper than seedlings, allowing you more opportunities for failure without breaking the bank. With proper planning and equipment, you are better off growing the plants from seed.
Starting Your Seeds
The best way to start seeds is to use a seed starter cube. A cube the size of one and a half inch will fit perfectly in a two-inch net pot. These small cubes can hold water while air can reach the roots, which is the most important while germinating seeds. First, you need to soak your grow cubes in chlorine or chloramine free water with a pH of 5.5. Water from your tap will be around 7-8 pH. You most likely need to use a pH down solution. Getting the chlorine out of your tap water is quite easy. Let it sit for one day for the chlorine to evaporate. If you want it to evaporate faster, you can use an air stone to air the chlorine out much quicker. If your water company uses chloramine, you need a reverse osmosis filter to remove the chloramine. Note that not every reverse osmosis filter can remove chloramine. Chloramine can’t be aired out and needs to be filtered. If you do not have a reverse osmosis filter available, you can use one thousand mg (one gram) of vitamin C (ascorbic acid) per forty gallons (one hundred and fifty liters) of water. Use a tray to soak the cubes, pour the water on top, and let it sit for a few minutes. Once most of the water is absorbed, you need to drain the rest of the water. Do not squeeze the cubes. This will remove air pockets inside the cubes. The following step is dropping your seeds into the holes. This can be a big task if you need to do a lot of seeds. Commercial growers use pelleted seeds and a vacuum seeder to speed this process up. Pelleted seed is a seed that is wrapped in clay. it is bigger, thus easier to handle. You could also use a toothpick and dip the tip in some water. This will make the seed stick to the toothpick, as shown in the following image. If the holes of the grow media are preventing you from dropping the seed in, use a pen or a toothpick to open the hole back up. You can use more than one seed per hole if the germination rate is bad. I always use two seeds per hole. When both seeds germinate, I keep the best one and use scissors to remove the bad one. Place your humidity dome on top of the tray to keep the seed starter cubes moist. Generally, the seeds don’t need water until they have germinated. If you notice that your seed starter cubes are drying out, you can pour some more water in the tray. Don’t forget to drain the rest of the water.
Rockwool cubes with seedling -Image from bootstrap farmer
Once the seeds start showing its first two leaves, you need to put it under a light source. This will provide the plant with the energy they need to grow. If you experience that the stems are growing long (stretching). It means that your plant is reaching for light. Increase the light on the seedlings to avoid this stretching. Do not use red light on seedlings. White fluorescents that are 6500K are perfect. After ten days, you can transplant them to your system. If you are growing in a greenhouse, it can take fifteen days in winter. Heat mats will increase germination during colder weather. The mats are placed under the seedling tray to warm up the seed starting cubes. Setting the heat mat to 68°F is recommended.
Recap: 1. Soak your seed starting cubes in chlorine or chloramine free water. Distilled water is even better. Make sure the pH is around 5.5. 2. Put the seed starting cubes in a tray. 3. Put the seed in the holes of the seed starter cubes. 4. Cover the seed starting cubes with a humidity dome. 5. Set the heat mat to 68°F (20°C) and place it under the tray. 6. Once sprouts appear, water them from the bottom with one quarter nutrient strength. The cubes will wick up the water. 7. Place them under T5 fluorescent lights. The humidity dome is still on the tray. 8. When you see four leaves and the roots are developing out of the seed starting cubes, it is time to transplant them to your growing system.
Nutrients during seedling
Seeds don’t need nutrients initially as they are self-contained. However, you can give them a quarter-strength solution, compared to what you are using in your adult plant hydroponic system.
0 notes
infraredforhealth1 · 3 years
Text
Why Do Polar Bonds Absorb Infrared Radiation?
Radiation From Infrared – Polar Molecules
There are two types of molecules that we know about: polar molecules and non-polar molecules.
Polar molecules are heavier, more dynamic, and move faster than non-polar molecules.
Non-polar molecules are similar to water in its molecular structure; however, it is more stable.
Polar molecules such as carbon monoxide, oxygen, nitrogen, oxygen, and silicon are known to absorb energy, produce heat, and emit heat energy.
Tumblr media
The radiation from infrared can be used for many applications in medicine and industrial settings. Physicians use it to determine the intensity of illness in their patients and use it to inject patients with medication.
Industrial workers who are exposed to high levels of radiation from x-rays, lasers, and other sources of electromagnetic radiation also use it to prevent health problems.
Polar molecules can be found in many products, including paints, plastics, textiles, metal products, and so on.
Electromagnetic energy is also emitted from stars, creating what is called ‘cosmic radiation.’
This is completely independent of the polar molecules that we are familiar with. If you were to go into a space ship and place a candle there, the candle would not burn, nor would anything else – this is because it is heated by the radiation from the microwave star.
Thus, the polar molecules must also be kept away from the radiation produced from this microwave source.
youtube
How Do I Know If a Substance is Vibrant?
One type of the nearly complete family of the periodic table of substances that has become a hot topic of discussion in both scientific and industry research is the nearly complete family of organic compounds known as cystine.
A cystine molecule can be constructed from one of several different structures such as a benzoic, a citric, an aromatic or heterocystine molecule where each of the structures can be composed of a carbon and oxygen.
There are many reasons why this particular type of molecule may be useful for medical applications including use in drug synthesis and separation of molecules as part of chemical engineering and biology.
It is believed that compounds in the class of cystine are capable of producing a hydrogen bonding via a process called “reduction”.
In this sense, a molecule of cystine containing hydrogen bonding is called a resonant cyst because it produces or yields hydrogen molecules when it bonds with an acid.
Tumblr media
A covalent compound such as a redoxant cystine can be made by exposing a metal ion or platinum wire to an electric current.
An excited state alloy with a negative charge electrode is formed during this reaction.
When the wire is exposed to a broad spectrum of ultraviolet (UV) light, the aluminum ion in the covalent bond will emit a yellow color.
The yellow color is produced because the silver atoms absorb all the UV rays.
When the ultraviolet light is emitted by the silver, the quantity of zinc present in the alloy increases because the covalent bond is now between a higher number of zinc atoms.
In this way, the zinc frequency is shifted to create the red color of the nearly covalent bond.
What Absorption of Energy Is What Shows a Signal on the Iris Spectrum
Now, that absorption of energy is what shows a sign on the infrared spectrum it may seem obvious that there is some correlation between light and IR.
In fact, there is a great deal of scientific research that indicates there is a very strong link between IR and light.
For instance, researchers have found that cancer cells, which are primarily light sensitive, show a remarkably similar response to UV rays (which are primarily red light) as they do to green or blue light.
Even more remarkably, they show a strong response to red light. The reason for this is that red light can not penetrate the skin as far as green and blue light, so cancerous skin cells respond to the red light.
Tumblr media
To put it simply, absorption of light and its corresponding energy waves gives off a signal on the IR spectrum.
It is this absorption that causes the familiar orange tint to appear when an egg is incubated.
As humans are particularly light sensitive, we tend to be greatly affected by the amount of sunlight that touches and covers us, and therefore it is this light that causes the transfer of infrared energy to the cornea and then to the iris of the eye.
The transfer is what makes the visible spectrum visible to us.
What Happens at the End of the Day
To understand what happens at the end of the day, it is necessary to understand what happens in the light of the sun and the radiation that hit us as we move about.
Most of us have learned in school that the radiation that makes up a sunsphere consists of light that has been absorbed by the gases floating in the middle of the sun, and then there is the visible light we can see.
We also know from school that when we get exposed to UV radiation, the sun’s radiation becomes harmful to our eyes, resulting in the development of cataracts and even blindness.
Now we know that the electrons that are present in the polar molecules of matter have an alignment that changes as they move about, and this makes them excited, which in turn causes them to capture energy.
Tumblr media
In this process, there is the production of photons, or bits of light, and these become the particles that we can see.
The electrons have an alignment as they move about, and this changes the light that is being absorbed and can be seen by us.
That is why a scientist might ask, so what happens at the end of the day, if a particle like an atom changes its alignment?
If a photon of light that was already absorbed is moved to a point where it would not be able to be seen, then the atom stops changing, and therefore we cannot see it.
This is a very simplified explanation of how all of this works, but hopefully it helps you understand.
If you are interested in learning more about the subject of the sun, solar flares, and what happens at the end of the day,
How is the Hydrogen Atom Connected to the Chlorine Atom?
The Hydrogen atom is connected to the chlorine atom by a simple string of bonds called a hydrogen bond. In order for hydrogen atoms to have a hydrogen bonding with another element they must be in a “rebound” mode, which means they must be sharing a physical space with that element.
The hydrogen atom has four electrons in its orbit, which are located between the single shell and a ring.
There are eight different types of hydrogen atoms which can exist in the single crystal structure of H2. There are two types of hydrogen bonds, which are very common.
Tumblr media
A hydrogen atom is connected to the chlorine atom by a bond known as a hydrophobic atom. A hydrogen atom is electrically neutral, which means it will not respond to any sort of electric charge. The hydrogen bonding with the chlorate does occur because the hydrogen atoms have the ability to accept a definite amount of chlorate, which pulls the electrons closer together and creates a hydrogen bond. This is used for the production of oxygen gas.
What Are Some Examples Where So HCL As an Example Can Be Used?
As mentioned above, inorganic compounds with the base elements carbon, oxygen, nitrogen and sulfur can be used as catalysts to break down organic compounds using an external catalyst.
For instance, where the hydrogen and chlorine are bonded by a covalent bond using some specific catalyst, he (historical), chlorine (chemical) or dichromate (amine) can be used as catalysts to break apart organic compounds with the same catalyst.
The catalytic properties of the different ascorbic acids allow them to act on their own and convert organic compounds in one step. In hcl as an example, where the chlorine and hydrogen are bonded by a covalent bonding using some specific catalyst, he is used to remove oxygen and carbon dioxide from the mixture as it reacts with the other chemicals in the catalyst.
Chemical energy is released in the form of heat with the catalytic conversion.
Organic compounds with the covalent bonds can also be converted to hcl using some type of catalytic mechanism.
In the case of dipropionate-dipropionate bonds where the hydrogen of one molecule is substituted by the chlorine or bromine of another molecule, the dipolar coupling is used as one of the catalytic mixtures described above.
Other common examples include the coupling of alkaline carbonates with dipropides, oxygen with dichromates and nitrogen with dichromates.
The use of catalytic interactions in biology can be used to create new medicines that can cure diseases, energy sources, synthetic materials, alternative energy, plastics and so much more.
The Nature of Covalent Bonds
In chemistry, one type of bonding agent is considered as covalent bond while another is considered as non-covalent bond. The fact is that there is a big difference between these two types of bonds. Generally speaking, the term “covalent” means that it is a combination of two substances where as the other bond does not have any mixture at all. Now if we talk about the nature of covalent bonds, then the fact that a covalent bond is not static in nature is a wrong notion.
Tumblr media
However, it is wrong to state that the nature of a covalent bond is such that the bonds between non-covalent atoms are unable to undergo chemical reaction.
The reason for this is that non-cation bonds are also able to undergo chemical reaction and produce heat.
As a result, the bonds between these non-cation atoms melt and form different kinds of peptides and polymers. It is interesting to note that many types of non-cation bonds have the same molecular structure as the covalent bonds.
Why Is All Polar Molecules Active in the Infrared spectrum?
Have you ever wondered why are polar molecules able to emit light in the infrared spectrum? Well, it’s because these molecules are highly polar because they have two dipoles and a single electron.
These types of molecules are very common and can be found all over the place in nature.
It is not very surprising that they emit light of high intensity in the infrared spectrum as well. However, what is equally interesting is that no one knows how these polar molecules produce such strong light.
Tumblr media
The fact is that these polar molecules are very small – much smaller than bacteria or other organisms.
Polar molecules are tiny versions of larger organic molecules that use an energy state similar to polar molecules.
The fact is that polar molecules use a very specific energy state to generate infrared radiation.
The emitted infrared radiation from polar molecules is unique and has a great capacity to heat.
One of the reasons why these molecules are able to emit infrared radiation in the visible and ultraviolet wavelengths is due to their size.
Another reason why are all polar molecules active in the infrared spectrum is because they contain molecules that have a double bond – a bonding with oxygen or a bonding with another molecule.
The absorption of this molecule is what makes polar molecules highly active in the infrared. Other reasons why are all polar molecules active in the infrared include; creating a storm front, cooling, and heating.
youtube
The post Why Do Polar Bonds Absorb Infrared Radiation? appeared first on Infrared for Health.
source https://infraredforhealth.com/why-do-polar-bonds-absorb-infrared-radiation/
0 notes
molsons112000 · 3 months
Text
So vitamin C can be used to remove chlorine from water and wastewater before it is dumped into rivers or lakes. See this piece below on using vitamin C to reduce chlorine levels.
Approximately 2.5 parts of ascorbic acid are required for neutralizing 1 part chlorine. Since ascorbic acid is weakly acidic, the pH of the treated water may decrease slightly in low alkaline waters. Sodium ascorbate will also neutralize chlorine. It is pH neutral and will not change the pH of the treated water.
https://www.fs.usda.gov › html
Using Vitamin C to Neutralize Chlorine in Water Systems
National Institutes of Health (NIH) (.gov)
https://www.ncbi.nlm.nih.gov › pmc
Protective effect of probiotics and ascorbic acid on bile duct ligation ...
by C Patel · 2022 · Cited by 2 — The probiotic and ascorbic acid combination significantly decreased the elevated blood ammonia levels in BDL-induced rats.
ResearchGate
https://www.researchgate.net › 229...
Effect of dietary vitamin C and ammonia concentration on the ...
Dietary vitamin C supplementation led to higher oxygen consumption and lower ammonia excretion. Na+/K+ ATPase activity increased with increased ambient ammonia ...
Wiley Online Library
https://onlinelibrary.wiley.com › doi
Effect of dietary vitamin C and ammonia concentration on the ...
by WN Wang · 2005 · Cited by 19 — This study examined the effects of dietary vitamin C and ammonia concentration on the cellular defense
Also, reducing ammonia in the blood increases brain performance. See how green tea can reduce or lower ammonia levels in the blood and increase in brain performance and athletic performance.
As you will see below ammonia Impairs the function of synapses in the brain...
Yes, reducing ammonia in the blood can help brain function. Ammonia is a waste product that the body produces naturally, and high levels of it can be toxic to the central nervous system (CNS). This can lead to a range of neuropsychiatric and neurological symptoms, including impaired memory, confusion, delirium, and even coma. 
NCBI
The Cerebral Effect of Ammonia in Brain Aging: Blood ... - NCBI
Jun 24, 2021 — High levels of ammonia, a natural by-product produced in the body, have been r...
NCBI
Blood Ammonia as a Possible Etiological Agent for Alzheimer's ...
May 4, 2018 — In this context, recent findings of some Lactobacillus strains reducing blood a...
MedlinePlus
Loss of brain function - liver disease - MedlinePlus
Aug 7, 2023 — Mild confusion. Forgetfulness. Personality or mood changes. Poor concentration ...
Cleveland Clinic
Hyperammonemia: What It Is, Causes, Symptoms & Treatment
Aug 24, 2022 — Having high levels of ammonia in your blood is toxic to your central nervous s...
VCU Health
New study shows liver patients see benefits after going meatless ...
May 2, 2024 — “We now need more research to learn if consuming meals without meat goes beyond...
National Institutes of Health (NIH) (.gov)
Identifying the direct effects of ammonia on the brain - PubMed
Elevated concentrations of ammonia in the brain as a result of hyperammonemia leads to cer...
Ammonia is normally processed by the liver and eliminated through urine, but issues with the liver or the urea cycle can cause it to build up in the blood. This condition is called hyperammonemia and can be life-threatening, requiring immediate medical treatment. 
Some research suggests that reducing blood ammonia levels may help with neurological diseases and neuronal functions. For example, certain strains of Lactobacillus bacteria have been shown to reduce blood ammonia levels, which may be relevant to the Mediterranean diet's potential to prevent Alzheimer's disease. Other drugs that target ammonia for treatment include sodium benzoate, glycerol phenylbutyrate, ornithine phenylacetate, AST-120, and polyethylene glycol. 
This is for informational purposes only. For medical advice or diagnosis, consult a professional. Generative AI is experimental.
National Institutes of Health (NIH) (.gov)
www.ncbi.nlm.nih.gov
The Cerebral Effect of Ammonia in Brain Aging: Blood–Brain ...
by D Jo · 2021 · Cited by 19 — Ammonia encourages impaired synaptic function in the aged brain, leading to memory loss. High levels of ammonium contribute to energy metabolism ...
https://www.fs.usda.gov/t-d/pubs/html/05231301/05231301.html
Results
Changes in blood ammonia concentration during and after exercise, and the relationship between blood ammonia concentration and total running time
Blood ammonia concentration gradually increased over time as running continued, and then gradually decreased after the end of running (Fig. 1A). The rate of increase of blood ammonia concentration was significantly negatively correlated with total running time, which was measured as an index of exercise endurance capacity (Fig. 1B; r = −0.57, P < 0.05).
https://healthfully.com/naturally-ammonia-levels-down-body-5845643...
How to Naturally Bring Ammonia Levels Down in the Body
WEBJul 27, 2017 · Green tea includes catechins that help prevent cancer cells and flushes your body free …
Tags:
Ammonia Build Up
Explore further
EatingWell
https://www.eatingwell.com/is-green-tea-good-for-you-8363574
What Happens to Your Body When You Drink Green Tea Every Day
WEBOct 18, 2023 · Several studies have found that green tea helps lower blood pressure. Scientists at the …
Explore further
0 notes
australiancosmetics · 3 years
Text
How to apply a beauty product for best results?
Spending a hundred dollars on your skin care products, but still not getting any magical results? We prefer to work harder than work smarter. The Same is the case here. We spend a lot of money on our skin care products and if we don’t get what we want for our skin, then we simply increase the number of skin care products on our dressing table instead of knowing the actual reason behind it. Here is a very simple and most common reason for not getting the results which we want is that our way of using and applying the products is wrong. Sometimes we follow the wrong sequence and sometimes we use the wrong technique to do it. Buying expensive products is not the only solution to your problem, but using them properly is a real mission. Here are some ways and sequences, some wonderful combinations to enhance the results, and some highlighted wrong combinations that can reverse your skin care results.
STEPS OF APPLYING SKINCARE PRODUCTS:
The Applying process of skin care products in the right sequence is very essential because if you don’t do this step right, it means you are disturbing the whole process.
Cleanser.
The very first step before starting any skin care routine should be deep cleansing with an effective cleanser. Cleansers are used to remove dirt, pollutants, and toxins clogged in your pores. So before applying any product on your skin, first make your that it is free of dirt or any other toxin layer. So deep cleansed your face by massaging a cleanser in a round motion for 5 minutes. Then wash your face with cold or warm water, whatever you find better.
Tumblr media
In this advanced era of growing technology, pollution is also growing and harming the surrounding. Keep in mind that pollutants make our skin pores clogged and cause irritation and infections. So start your skin care with a cleanser. The Cleanser should be the first step of your skincare routine as it removes all the dirt, pollutants, and toxins present in your skin. So before starting any skincare, make your that your skin is completely cleansed. If you don’t cleanse your face before applying any product, then the pollutants and dirt don’t allow the products to get absorbed in the skin and will not show any results. The Cleansers comes in many types like:
Gel cleansers, oily cleansers, clay cleansers, foam cleansers, etc. Wash your face and cleanse it properly.
Toner.
Imagine your skin, giving a natural sparkling look that you no longer need a highlighter in your makeup? That is possible if you use an effective toner or a good hydrating mist. The Toner helps to clean up the remaining dirt or clogged pores after cleansing and also prepares the skin to welcome the coming products like serum or moisturizer. If your washing water contains any impurities like chlorine, toner helps to remove them. Always check the constituents of your toner. Alcohol-based toners are not very beneficial for your skin. Toner or a hydrating mist with natural ingredients is most beneficial to make your skin naturally glowing and hydrated.
Effective method:
Apply two to three layers of toner on your face before applying any other product. It’s just like making your skin ready for the guests. You can apply the toner by simply pouring four to five drops of toner on the cotton pad and swipe it on your face or you can apply it with your hands also. The Application of repeated layers of toner makes your skin more absorbent for the serum and makes it fully hydrated. The very important thing to keep in mind in mind is that never apply a toner after moisturizer. Because moisturizer makes a layer on your skin and doesn’t allow anything to penetrate your skin. So always apply a toner after washing your face and before applying a moisturizer
Serum.
The Serum is a liquid product concentrated with beneficial ingredients applied directly to your skin and reacts quickly on the skin cells as compared to thick creams. The Serum is the quickest way of serving your skin with skin essentials in the easiest way.
Wash or cleanse your face with a good cleanser.
Before using any serum, make sure to cleanse your face with a good cleanser.
Apply a toner to clean your pores.
After cleaning your facial skin deeply, apply toner to it. Toner performs the function of cleaning your skin pores and tightens the skin.
The other way to apply a toner is to pour a few drops on your palms and then press your palms on your face for 2 to 3 minutes for best results.
Apply serum on each area of your facial skin.
The best way to get an effective result of your serum is to apply it in all parts of your face. Pour a drop on the cheek area, nose, forehead, and chin. If serum has a thick and watery consistency, then apply it in more quantity. Otherwise oily and thick serums can be applied in less quantity.
Give round and upward massage for 3 to 4 minutes.
Then massage it for 3 to 4 minutes in an upward and outward round motion. Massaging helps the product to get absorbed deeply into your skin and show the best results. Plus, it also improves blood circulation and lymphatic drainage in your skin.
Apply a moisturizer after it.
After applying a serum, hydrate, or moisturize your skin with a good moisturizer. The Moisturizer keeps your skin moisturized by locking up your skin moisture. Apply a skin moisturizer in an upward direction to prevent premature aging of your skin. Upward and outward motion tightens your skin.
Use day and night for best and fastest results.
For magical results apply serum twice a day. Use it before going to bed because your skin feels relaxed at night and skin care product effects more effectively at night, then in the morning. So for better results, apply serum day and night.
Tumblr media
Moisturizer.
Moisturizer is an essential and last step of the skincare routine. Moisturizers are made up of moisturizing and hydrating agents that lock up the natural moisture of your skin and prevent it from getting dry and dehydrated. Especially in winters, your skin becomes dry due to hot showers. Hot water absorbs the moisture from your skin so moisturizer is the best treatment for dry skin. Moisturizers keep your skin look younger by lessening the chances of wrinkles and blemishes.
Other methods to make your skin care products
Steam:
Steam is also an effective, easier, and cheaper method to make your skin more welcoming towards different skin products. Steam is the easiest way of getting a better result from your skin care products. Steams help to increase the blood circulation in your skin, deeply cleanse the skin, and removes dirt and excess oil from your clogged pores. Steam is very hydrating for dry skin and prevents premature aging by boosting collagen production.
Methods of taking steam:
Take hot water steam.
Then swipe a soft baby towel on your face.
Do cleansing with a cleanser and then stat your skincare routine for fast and best results.
Ice cubes:
Ice cubes are the most comforting and soothing way of getting glossy skin. If you are tired of doing a skin care routine after a hectic day, then simply put your cute ice cubes from the refrigerator and wipe them on your face. Those cut little ice cubes do not only make you fresh but also give your skin some soothing and healthy effect. Let’s check the benefits of ice cubes:
Allows the absorption of skin care products three times faster.
Give a soothing and cooling effect to irritation and redness.
Tightens your skin.
Slow down the process of aging.
Removes wrinkles and lines.
Reduces puffiness and swelling.
Cold compress also reduces dark circles.
Best time for a skincare:
The Night time before going to bed is the best and perfect time for a skin care routine because your skin is relaxed at night time and doesn’t face any pressure or environmental factors. At night skin care products absorb smoothly into your skin and perform their functions without any interruption. For better and fast results, doing a skin care twice a day, once in the morning and once a night is a good decision.
Vitamin C (Ascorbic acid)
The best time of using products with vitamin C is day time because in the morning we go out and UV rays cause damage to our skin so vitamin C protects our skin from UV rays.
Vitamin E
Vitamin E is best to use at night time before sleep because vitamin E serum contains moisturizing and anti-aging properties. So at night skin functions more properly with Vitamin E.
Glycolic Acid
Skin care Products with glycolic acid should be used in the evening use of glycolic acid in the morning is a little bit dangerous. The reason is glycolic acid is sensitive to UV rays and if you go out with a glycolic acid product on your face, UV rays may cause any damage to your skin. The only condition of using it in the morning is to use it with sunscreens.
Hyaluronic Acid
Skin care products with hyaluronic acid can be used at any time of the day because hyaluronic acid performs the function of anti-aging and it does not cause any damage to the skin in the morning or at night.
AHA and BHA:
Alpha hydroxy acid and beta hydroxyl acid, can be used at any time of the day. AHA is best for acne scars and dry skin and BHA is best for oily skin as it stops the sebum production.
Niacinamide:
Skin care Products with niacinamide can be used both in morning and evening and it does not have any side effect if used in the morning or evening because niacinamide make your skin even-toned.
Lactic Acid
Skin care products with lactic acid can also be used both in the morning or evening, but the best time to use it is a night time as it helps in promoting collagen production and gives a moisturizing property.
Retinoic Acid
Skincare products with retinoic acid are ideal to use with the night skin care routine because retinol also makes your skin sensitive to the sun. Start using it once a week to check its compatibility with your skin, then you can use it once a day if it doesn’t show any side effects. Retinol is well known for its anti-aging properties because it boosts up the production of collagen and blood vessels in your skin and enhances the appearance of your skin.
Ferulic Acid
Ferulic acid products can be used at any time of the day. No time is fixed for it as it performs the function of removing wrinkles, blemishes, and lines and gives a spotless skin.
Salicylic Acid
Salicylic acid products are not commonly used in a skin care routine. It is used for infection or inflammation purposes. Daily use of salicylic acid can control oil production and prevents acne. You can use it with a combination of other products.
Benzoyl peroxide:
Skincare products with benzoyl peroxides are used as a face wash, facial scrubs, or a cream. It is well known for its anti-bacterial properties and hence the best solution for acne-prone skin. Benzoyl peroxide products can be used for a shorter period and then wash off your face because too much use of it can cause damage to your skin. there is no need of applying benzoyl peroxide overnight because it can cause damage to your skin like irritation and dryness.
Massage techniques for better absorption of the product:
Spending a thousand dollars on skin care products without doing a massage is just a waste of money, time, and products. As you all know that the massage makes the absorption of products possible and faster into the skin. Without massage, there is only a 10% chance of absorption of products into your skin. So one of the essential steps of skin care routine is massaging. Benefits of massaging are:
Increased blood circulation.
Increased lymphatic drainage.
Increased collagen production.
Fewer wrinkles.
Slow aging.
Tightens skin.
Improves skin tone.
Maintain skin’s health.
The Best ways of doing a facial massage are:
Start from the forehead.
Use a circular motion with two fingers from the nose towards outside.
Upward and outward motion on the cheeks is the best way to massage.
The Downward motion of massage fastens the process of aging by loosening the tightening of muscles.
Move your finger from your chin to the outward direction of your jaw line.
Repeat this procedure for at least 15 minutes for best results.
Apply a moisturizer or oil before doing a massage, it helps in the frequent motion of the fingers on your face.
Best combinations of skin care products to make them more effective:
Vitamin C and Sunscreen:
The Combination of vitamin C and SPF is like an antioxidant process booster as both work for neutralizing free radical damage. Apply a vitamin C serum or cream then use a sunscreen layer over it to enhance the functioning of both products. If you want an appropriate shield against UV rays then apply this combination to enjoy the warm Sun hugs.
Vitamin C and glycolic acid:
The combination of Ascorbic acid and glycolic acid is suitable for some people and harsh for people with sensitive skin. People with sensitive skin get irritation and redness by using this combination. You can use it after getting guidance from your dermatologist. Vitamin C is itself is an acid so using it with glycolic acid is sometimes not a good idea. You can use one in the daytime and the other in the night time to prevent harsh results.
Salicylic acid and glycolic acid
Salicylic acid and glycolic acid, both works as an exfoliater as both works for cleansing of clogged pores and reduce excess sebum production. This combination works great for oily skin and acne-prone skin. These both acids cleanse your skin cells, deeply and remove dead cells to give your skin a fresh, radiant, and smooth look. You can use it altogether or separately in day and night time.
Niacinamide and salicylic acid
This combination is great for oily and acne-prone skin because both have anti-acne, and anti-aging properties, plus salicylic acid reduces the production of sebum hence reduces the chances of acne. Follow the sequence of applying the salicylic acid first and then apply the layer of niacinamide as both are great in maintaining PH balance.
Benzoyl peroxide and salicylic acid
This combination is a big no as it results in irritation and any side effect that cause skin damage. Both these products cannot be used altogether and not at different times of the day as it results in redness, inflammation, and dryness due to its anti-bacterial property.
Benzoyl peroxide and retinol
This combination is not beneficial for your skin because these products cancel the effects of each other if used together. They show marvelous results when used separately at different times of the day, but you cannot use both products at the same time as they will no show any results due to cancellation.
Benzoyl peroxide and niacinamide
Using benzoyl peroxide and niacinamide together is not a good decision as it can cause severe irritation. People with sensitive skin can face serious problems by using this combination like redness, inflammation, or any other skin disorder.
Retinol and salicylic acid:
Both these ingredients do magic for your skin if you use them separately, but the combination of these two ingredients is a disaster for your skin. This combination causes irritation which leads to serious skin cell damage.
Retinol and AHA/ BHA
It’s not confirmed that the combination of retinol and AHA and BHA cause damage to your skin, but it makes the effect of each other less effective by depressing the active ingredients of each other. There is no confirmation of any skin damage in this combination, but use it after concerning with your dermatologist because sometimes it causes dryness and peeling.
Glycolic acid and retinol
The combination of glycolic acid and retinol is like a feast for your skin as both these ingredients are a lifesaver for your skin. Retinol and glycolic acid do the magic in their way, but their combination enhances its effects and show results two times faster and effective.
Glycolic acid and lactic acid
This combination does wonders for your skin as both are super excellent in its benefits to our skin. Both work as a super exfoliant and cleanser for clogged pores and dead skin cells. This combination not only do deep cleansing but also moisturize your skin and protects against the Sun damage.
youtube
0 notes
palvichemical · 4 years
Text
Uses of Hydrochloric Acid
One of the simplest chlorine-based acid systems with water content - Hydrochloric Acid has many uses. This blog compiled by Palvi Chemical who is a well-known hydrochloric acid distributor in Brazil , hydrochloric acid supplier in Brazil and hydrochloric acid exporter in Brazil lists of the uses of Hydrochloric Acid. Let’s quickly learn the uses of hydrochloric acid as listed by Palvi Chemical who is a hydrochloric acid distributor in Qatar, hydrochloric acid supplier in Qatar and hydrochloric acid exporter in Qatar.
Steel Pickling
Hydrochloric acid is used in the steel pickling process that is to remove iron oxide/rust from steel.
Palvi Chemical is a hydrochloric acid exporter in Qatar.
Hydrochloric acid has a key role in the production process of organic compounds like vinyl chloride, dichloroethane, bisphenol A for polycarbonate, activated carbon, ascorbic acid and so on. Hydrochloric acid is also used in the production process of inorganic compounds like ferric acid, aluminium chlorohydrate, iron(III) chloride and polyaluminium chloride (PAC).
Palvi Chemical is a hydrochloric acid supplier in Qatar.
Hydrochloric acid is used as an ingredient in the manufacturing process of many pharmaceutical products, food and drinking water. It is also used in the leather tanning industry.
Palvi Chemical is a distributor acid supplier in Qatar.
Hydrochloric acid is used to purify table salt.
Palvi Chemical is a hydrochloric acid exporter in Qatar.
Hydrochloric acid is used in the production process of additives such as citric acid, fructose, and hydrolyzed vegetable protein.
Palvi Chemical is a hydrochloric acid supplier in Qatar.
Hydrochloric acid is used in swimming pools for pH control process.  
Palvi Chemical is a distributor acid supplier in Qatar.
This list of 6 uses of hydrochloric acid is listed by Palvi Chemical. Palvi Chemical is a hydrochloric acid distributor in Brazil, hydrochloric acid supplier in Brazil and hydrochloric acid exporter in Brazil whom you can contact for all kinds of hydrochloric acid supply in Brazil.
For any requirement of hydrochloric acid in Qatar,  feel free to contact Palvi Chemical as Palvi Chemical is a hydrochloric acid distributor in Qatar, hydrochloric acid supplier in Qatar and hydrochloric acid exporter in Qatar.
1 note · View note
exquisitesip · 4 years
Photo
Tumblr media
New Post has been published on http://www.buildthebottle.com/2020/05/24/fire-thorn-wine-recipe/
Fire Thorn Wine Recipe D.I.Y.
Fire Thorn Wine Recipe D.I.Y.
Hey Guys and Gals!
Are you looking for an awesome Fire Thorn Wine Recipe you will find it below! So look no further you have found what you have been looking for! Below is the most awesome tasting Fire Thorn Recipe’s in the world.
Ingredients
Step 1
4 cups of Fire Thorn berries
1 cup of golden raisins
2-1/2 lbs sugar
2 lemons
1 large orange
½ tsp pectic enzyme
1 tsp yeast nutrient
7½ pts water
Step 2
1 pkt Champagne or Lalvin RC-212 wine yeast
Instructions
 Equipment
Primary fermenter (carboy)
stirring spoon
hydrometer,
straining bag
siphon tubing kit
1 gallon carboy or jug
an airlock and bung
Sanitizer
(A thermometer and brewing belt may be used to monitor and control temperature.)
Walmart
Make sure all equipment (i.e. stirring spoon, etc..) is sterilized you can bleach it or use . Contaminated equipment can let a stray yeast enter the wine and ruin it’s taste.
Instructions
Step 1
Boil 4 cups of water on to boil.
Meanwhile, sort, destem and wash the berries, discarding any that are damaged or not ripe.
When water boils, put the berries and raisins in water and adjust heat to maintain a simmer for 20 minutes. Remove from heat and allow to cool. Pour berries and raisins in blender and chop, then place in primary.
Slice fruit thinly add to carboy then add all ingredients except ascorbic acid pectic enzyme and yeast. Stir well to dissolve sugar, cover and forget about it for 12 hours.
Wait 12 hours, then you will add your prepared yeast.
Step 2
 Yeast Hydration and primary fermentation: in a large cup add 4 ounces of warm chlorine free water.
Stir the yeast into the water then let mixture stand in cup for 15 minutes, make sure it is bubbling and then you will add it to your wine.
Take your hydrometer reading and calculate all the measurements.
Attach your airlock and wait for your fermentation to be complete, let ferment with the pulp for 5-7 days gently agitate daily.
After 5-7 days when the foaming calms down you will siphon your wine off of the sediment into your secondary container which is usually your glass carboy.
(The sediment is the stuff that accumulates at the bottom of your container.)
Step 3
After you strained into your secondary carboy wait till the fermentation activity dies down (could be between several weeks to several months)
Final Step
Although yeast activity will decrease as the fermentation process proceeds, there will still be fermentation going on as long as you still see some foaming or bubbling.
then rack into a clean carboy.
After fermentation has stopped completely any remaining sugar required to sweeten it to suit your taste.
When the wine has cleared and is inactive – taste and bottle.
Stage 4: Aging / Bottling
You can repeat the racking process several times to get the maximum clarity though I would wait in-between each time a day or to, so the sediment can settle. I personally don’t like racking multiple times because of the risk of oxidation meaning the air touching it will give it a funny taste.
Now is when you will add the ascorbic acid and add sugar to taste.
Bottle using the siphon cork and let wine sit for 6-12 months before drinking. Some would even prefer waiting 2 years!
Other Great Things To Know
Apple Wine Recipe D.I.Y.
Pomegranate Wine Recipe D.I.Y.
Mango Wine Recipe D.I.Y.
What Yeast To Use For Fruit Wine
Different Types Of Sugar You can Use In A Liqueur
Which Liqueur To Choose When Making A Party
From Our Sister Website Terebelo.com
Marketing With Optimism
The Marketing Of My Vodka Named Yello
Sales Pitch Listen Don’t Talk
What Is In A Handshake
Be Well Rested Before A Meeting
To spirits and cheers,
Binyomin Terebelo, Master Distiller and Drinkologist
Image by Yasemin Yelbay from Pixabay
0 notes
beauty-tips-experts · 5 years
Text
Which Vitamin C Serum is Best for Face in India 2020
Tumblr media
Do you know which is the best vitamin c serum for your face? It depends upon your skin type and how will you apply it. Yup, your skin because we all have different skin types with different sensitivity levels. So, there are many things to know about this little miracle serum.
In This Article
What is the Vitamin C Serum, Exactly?
What Should I Look For, When Buying Vitamin C Serum?
Best Vit C Serum Best Benefits
How to Get Best Result from Best Vitamin C Serum
Answer to Your Questions | FAQ
What is Vitamin C Serum, Exactly?
In easy words; Vitamin C Serum is extracted or we can say a pure form of Vitamin C, it doesn’t mean that fruits containing Vitamin C are not pure. It just means that it is mixed with any things that we don’t ‘Exactly’ need.
The pure form of Vitamin C is, only Vitamin C nothing more or if there is something more than it should be useful. When Vitamin c is mixed with useful components that make it from unstable to stable or I would say suitable for our human Skin. That Stable Vitamin C Liquid is called Vitamin C Serum.
Vitamin C Serum for Skin delivers pure and potent stabilized Vitamin C that stays active from the first to the last drop.
Potent 10% stabilized pure Vitamin C formula
Absorbs immediately
Non-greasy and non-sticky
Lightweight texture
Suitable for all types and skin tones
Clinically tested
Allergy tested
Dermatologist tested
What Should I Look For, When Buying Vitamin C Serum?
Are you ready to add this miracle ingredient to your daily routine? Fantastic!
However there are many things, not all Vitamin C products are created perfect, which are why it is important, that you know which elements to look for when selecting a new product.
Make sure you seek out stabilized preparations of vitamin C that suits all skin type, especially sensitive skin. Un-stabilized solutions can cause irritation and end up being harmful to your skin.
Similarly, you should always buy products that are packaged in such a way that protects the product from sunlight. That can prevent premature oxidation of the vitamin.
Which are the most effective type to apply Vitamin C Serum to your skin and it is important to find one with highly active ingredients and smaller molecules, which helps penetrate the skin deeper? You may also want to look for a serum that contains L-Ascorbic acid, as it is the purest form of vitamin C and provides superior antioxidant defense compared to any of its acid derivatives.
Vitamin C Serum Benefits
As I said that it is a little miracle serum so it works magically
Protects Against Free Radical
If you haven’t heard yet, air pollutants are causing our skin cells damage.
Fortunately, the benefit of Vitamin C serum for skin care is a help to protect against the damage caused by free radicals.
Free radicals are basically unpaired electrons that are chemically unstable. And try to find other electrons to help them stabilize.
Brightens Complexion
Best Vitamin C Serum also helps to brighten your skin by reducing the appearance of dark spots and uneven skin tone. It is a powerful antioxidant that leaves you with a vibrant glow.
Anti Aging Formulation
The main reasons for saying it a miracle because it has proven that it reduces the appearance of Fine line, wrinkles, sine of aging by boosting up collagen production.
In simple words, Collagen is those things that help your outer layer of skin as well as interlayer of your skin to look perfect #WithoutWrinkles #WithoutFineLines #LadyBaws.  Age spots and uneven skin tone improved. It also helps in skin firming, brightening, and tone for smoother, fresher skin.
How to Get Best Result from Best Vitamin C Serum
Deciding to add a new component to your skincare routine can doubt, but with a basic understanding of how you should layer products, you can quickly develop a customized regimen that gives you the best results.
Cleanser – Start with a daily foaming wash to remove excess dirt, makeup, and other surface pollutants from your skin.
Exfoliate – Add this step only twice a week to help remove dead skin cells that could be clogging up your pores and dulling the appearance of your skin tone. The key to using exfoliating products is not to scrub too hard, as doing so could create micro abrasions on the skin, which could become infected and result in acne breakouts.
Toner – These products are designed to remove any residue left by your cleanser in addition to wiping away salts, chlorines, and chemicals that can be found in tap water that may dehydrate the skin.
Serums – Many Vitamin C Products are available in the form of serums or Liquid, That offer concentrated, the active ingredient, such an increase in the overall performance of the product.
Moisturizer – Finish things off with an evenly applied moisturizer to your face and neck to help keep the skin supple.
Answer to Your Questions | FAQ
Q Can I use it at night
Yes, definitely you can. Dermatologist recommends to apply vitamin c serum at night before bed, so it could nourish it properly. Gently massage before the bet time and after washing yours with vitamin c serum for best results.
Q How much time we can use on a face
Dermatologist recommends it for not using more than once a day. It is highly saturated and can harm sensitive skin if you apply it more than one time a day
Q Can Boys or girls use Vitamin c Serum
Vitamin C Serum is popular among celebrates even male celeb.
Q Can we add a few drops of Vit E in it and apply on skin as ascorbic acid might be a bit harsh on sensitive skin??
Yes, you can add a few drops of Vitamin E while applying Vitamin C Serum.
Two age-reducing vitamins ~ C and E. Vitamins are a powerful antioxidant, they may be offering their benefits through effects that are very distinct from antioxidation.
Taking vitamins C and E help keep your cardiovascular system healthy by reducing the amount of harmful buildup on the walls of your arteries.
Q I have dry skin, should I use vitamin c serum?
Ans. Our body is made up of water and to maintain beautiful skin it’s important to make it moist. Vitamin C Serum is Best for that helps the skin retain moisture by skin grow ceramide protection which helps retain moisture. Dermatologist recommends Niacinamide if you have eczema or mature skin.
Yes, it can be used on dry skin.
Q Which one is better Vitamin C tablets or serum
As our topic says, If you want to cure maximum skin problems then you must use a serum for fast results by applying directly instead of digesting it.
Click to read the article Why Should I Use Vitamin C Serum?
Q Is Vitamin C Serum bad for Skin
I would not say a word like "bad" but sometimes it shows side effects and reacts with some people and give the sensation of heat and if you use it inappropriately it may lead to redness on your skin.
Q What food is highest in vitamin C?
Vitamin C Rich food is broccoli, cantaloupe, cauliflower, kale, kiwi, orange juice, papaya, red, green or yellow pepper, sweet potato, strawberries, and tomatoes.
Give love to your skin that it deserves with the best, for best skin get The Best Vitamin C Serum
0 notes
derma-essentia · 5 years
Text
How Vitamin C Serum is Best for Your Skincare Routine
Tumblr media
We all know that Vitamin C is great for our immune system and overall health. But did you know that Best Face Serum with Vitamin C has outstanding benefits for your skin too?
 Antioxidant protection makes Best Vitamin C Serum for Skin health crucial. When added to your daily routine. Vitamin C Serum Hyaluronic Acid helps provide a wide range of benefits that keep your skin looking youthful and fresh.
Vitamin C Serum Best Benefits
Protects Against Free Radical
If you haven’t heard yet, air pollutants are causing our skin cells damage.
 Fortunately, the benefit of Vitamin C serum for skin care is helping to protect against the damage caused by free radicals. While neutralizing them to slow down the visible signs of aging. Free radicals are basically unpaired electrons that are chemically unstable. And try to find other electrons to help them stabilize.
 Unfortunately for you, these annoying nanoparticles usually resort to stealing electrons from other cells – like the ones in your skin.
 Brightens Complexion
High Concentration - Vitamin C also helps to brighten your skin by reducing the appearance of dark spots and discoloration. With its powerful antioxidant properties, vitamin C works to even out skin tone and brighten your overall complexion, leaving you with a vibrant glow.
 Reduces Signs of Aging
It is the Best Vitamin C Serum helps to reduce the signs of aging by dramatically improving the appearance of fine lines, wrinkles, and dark spots. Moisturizing with Serum Vitamin C aids in providing the skin’s natural lipids and restoring the skin’s natural barrier function, which yields softer skin texture and increased moisture retention.
 Anti Aging Formulation
Vitamin C has proven to reduce the appearance of Fine Lines, Wrinkles by boost collagen production. Age spots and uneven skin ton improved. It also helps in skin firming, brightening, and tone for smoother, fresher skin.
What to Look In Vitamin C Products
Ready to add this miracle ingredient to your daily routine? Fantastic! However there are many things, not all Vitamin C products are created equal, which is why it is critical that you know which elements to look for when selecting a new product.
First, make sure you seek out stabilized preparations of vitamin C that suits all skin type especially sensitive skin. Un-stabilized solutions can cause irritation and end up being harmful to your skin.
 Similarly, you should always buy products that are packaged in such a way that protects the product from sunlight. That can prevent premature oxidation of the vitamin.
 For serums specifically, which are the most effective way to apply vitamin C to your skin, it is crucial to find one with a higher concentration of active ingredients and smaller molecules, which helps penetrate the skin deeper. You may also want to look for a serum that contains L-Ascorbic acid, as it is the purest form of vitamin C and provides superior antioxidant defense compared to any of its acid derivatives.
 Your vitamin Must include
Pure Vitamin C acts as a skin lightning agent and serves as the best anti oxidant to reduce age and dark spots.
Hyaluronic Acid is the best moisturizer for skin which helps in reducing fine lines and skin roughness.
Ceramides improves hydration, repairs the skin barrier and balances the skin tone and texture.
Niacinamide  helps to reduce blemishes, freckles and it is the best pigmentation home remedy.
Collagen Synthesis  to firm your skin and helps to reduce wrinkles.
Pure and Potent as it is paraben and sulfate free.
Routine to Get Vitamin C Serum Best Result
Deciding to add a new component to your skincare routine can doubt, but with a basic understanding of how you should layer products, you can quickly develop a customized regimen that gives you the best results.
 Cleanser – Start with a daily foaming wash to remove excess dirt, makeup, and other surface pollutants from your skin.
 Exfoliate – Add this step only twice a week to help remove dead skin cells that could be clogging up your pores and dulling the appearance of your skin tone. The key to using exfoliating products is not to scrub too hard, as doing so could create micro abrasions on the skin, which could become infected and result in acne breakouts.
 Toner – These products are designed to remove any residue left by your cleanser in addition to wiping away salts, chlorines, and chemicals that can be found in tap water that may dehydrate the skin.
 Serums – Most vitamin C products are available as serums, which can offer concentrated doses of their active ingredient to your skin, increasing the overall performance of the product.
 Moisturizer – Finish things off with an evenly applied moisturizer to your face and neck to help keep the skin supple.
You just need Best Vitamin C Serum in India and that’s “Derma Essentia's“Best Vitamin C Serum” - Skin Health Expert and celebrity esthetician. Vitamin C Power helps many people to achieve skin as they dream. It a powerhouse ingredient that is essential for your daily routine.
What People Say About It:
Tumblr media Tumblr media Tumblr media Tumblr media
0 notes