#terminal block accessories

[mich2lig]

Socket Contact, Cable Crimp, usb connector, crimping tool, circular connector

AMPSEAL 16-20 AWG Wire to Cable Crimp Socket Contact

[siam2dli]

Terminal Blocks & Accessorie, crimping tools, coaxial compression tools

AMPSEAL 16-20 AWG Wire to Cable Crimp Socket Contact

[glowcircuit]

I built a miniature Va11 Hall-A Bar inside of my PC!!

Va11 Hall-A PC Parts & Build list

PC:

CPU : Intel I9 14900k

GPU: Intel Arc A770 16gb

Ram: Corsair Dominator 64gb 5600

Mobo: Maxsun Terminator Z790 D5 wifi

Hard drives M.2: Samsung 990 pro 2tb, Samsung 970 evo plus 1tb, CT 1tb,                                 Adata 500gb

PSU: ROG Thor 850 P2

Cables: Cablemod.com custom shortened and sleeved

Water loop distro : EKWB FLT 120 reservoir + D5 pump

Water loop cpu block: ThermalTake Pacific Mx2 Ultra 

Water loop radiators: Alphacool HPE 20 x 2

Water loop hardware: 15 Alphacool, 3 EKWB, 2 Alphacool soft, 2 granzon    

Water loop tubes: EKWB Acrylic tube 14mm, Alphacool 13/10 soft

Air Cooling : ThermalTake Toughfan 120mm x 3  + Controller

Air Cooling : Noctua 40mm pwm server fan x 2 (non visible)

Additional RGB Control : Coolermaster controller

Case:

Lian Li PC V600, left side mount, released in 2006, I acquired it in 2015 from PC Recycle in sodo Seattle.

I had to track down a new foot, one had been missing since I acquired the case (ebay)

Mods:These are the case mods I did personally

Cut a hole for the cpu mounts in the Motherboard mount plate as this case was designed for older hardware 

Cut two 120mm blowholes and added aluminum covers (Dremel)

Cut Front and rear windows into side panels (Dremel Max)

Moved PSU from vertical placement in the lower right side of the case in front of the CPU  to horizontal placement in the top left in old drive bays. 

The PSU bracket had to be cut to show the OLED on the side. 

Modded the side panel rail slide to accommodate the PSU, I used the original aluminum stand the psu was on, cut in half and epoxied with JB weld. 

Changed and moved Power/ Reset switch to the back of the case, shortened and spliced the cable

I cut and bent my own 14mm acrylic tubes (hobby miter, heat gun). 

Cut and made two way mirror for the front panel

Plastic "truss" is both functional and aesthetic. It came from a Gunpla accessory kit and has two cables passing through it and it acts as the GPU support. I could only get red and had to paint it.

Notice that some logos are missing/ covered, I dislike having a case as an advertisement. The Rog eye on the PSU is mostly covered but iykyk, most of the word "Intel" on the ARC GPU, Two of the Thermaltake logos on the fan edges, the Paint on the Thermaltake Mx2 Ultra and Maxsun terminator heatsink. (I will eventually cover the visible SSD with a heat sink, cover the fan info on the rear and work a cover for the word "dominator"). the one logo explicitly unchanged is the LianLi case badge, if I think of a perfect replacement, maybe then.

Mod I did not do:

I did NOT shorten and sleeve my own cables, I used cable-mod.com. I am not confident in my ability to do this.

BAR:

"Bar Tiny" Re-ment sets from Japan, 17 sets involved. 

 I customized the color of the bar and chairs and shortened one table for the mezzanine. The whole bar, minus barback- is on a removable 7 inch piece of black acrylic for cleaning.

Jill Stingray Nendoroid

Jils Cat, it sleeps on the GPU

Jill Stool: Jill is glued to a cute doll stool to see over the bar

Jill Accessories non-Nendoroid: cellphone, purse, coat (ebay)

Dorothy Haze Nendoroid

will be added on release.

Bar Back:I made this myself

Black acrylic sheet, and frosted acrylic rods.

Doll Light power kit: 8 Led lights, 4 incandescent lights

USB Doll light power strip

Other Bar Accessories:

Overhead Hanging farmhouse light

trash, mop, broom, pan, mop bucket, 

2 blue fuzzy chairs 

Miniature plants

Miniature Microphone

Mini bottle Dom Perignon, an xmas gift from my friend nemo, it's

 on the top shelf 

Problems and changes:

1. ARGB, pretty pretty pain in the ass. 4 pieces of software........

2. The water loop was changed extensively as hardware came in and space limitations were discovered. The biggest change is that I originally planned to have one radiator on the front of the case, the tubes running over Jills head and to light the tubes as lighting for the bar, to do this the fan would have been in the case proper pushing the whole bar to far into the mobo, it didn't work, so the loop was moved to the top of the case and caused me to have one complex bent tube 

 Second, I had planned the loop to use one sideport on the distro, but space limitation moved both ports to the top causing the complex fittings setup in that corner.   

3. The MOBO, sigh. This has been clearly the most challenging choice I made in this build, I really wanted it to work perfectly too, but I rolled those dice because: Aesthetic+function, the board I wanted (https://en.colorful.cn/en/home/product?mid=84&id=400d19bc-5655-49e1-b391-df00b60935ef) was to great a risk for the cost. This was a silver medal. 

I generally dislike the design options I had in the Z790 series of the big board makers (I  HATE big logos), especially the full ATX, there was one M that interested me, I should have picked it . This board has potential, but the BIOS is underdeveloped and compatibility has been problematic, I had to do a tricky outdated style BIOS update right from the box, and have had to reset the cmos a couple times. It skips BIOS on general boot and though stable, it will have to be addressed eventually, it doesn't have a proper sleep because of some issue between uefi & legacy. It may end up replaced, which will require a full build teardown.

the Turbo fan built into the board doesn't seem to function

Alos, the two argb connections on the mobo dont work, or I can't get them to recognize anything, necessitating the Coolermaster controller for the PSU and Distro. it is shoved behind the distro along with a Noctua 40mm

[duckedoesartstuff]

HOWARD CHARLES!!!!!! HE IS HERE!!!!!!!!!!!

IM SO SORRY THIS ART IS ASS 😭😭😭 I FINISHED EVERYTHING AND I REALIZED I MESSED UP THE ANATOMY SO I HAD TO GO BACK AND SNAP HIS SPINE!!!!!!!!!!!! thas why everything is in 144p quality. (also shoutout to anyone who recognizes the lyrics in the art) Ok anyways well its time for character info!!! (um, it's kind of a lot)

Howard Charles (Charlie):

I gave a brief amount of info on him on my last post so its time to elaborate!! He works at the CCC, he's not exactly on the forefront of dealing with chaos, he is more or less just a repair man. Although he is just a repairman, he is experienced with electrical work. (this would come back to help Luccille later) He just chills out in their facilities, repairing stuff and making sure all equipment runs smoothly.

Charlie is actually quite interested in investigating anomalies, mostly cause he is an anomaly himself. His chaos levels are too low for the CCC to exterminate him. The CCC hired him in order to monitor him incase something happens with his chaos levels. His "anomalous property" is literally just having a brick head... Absolutely no one knows how or why he has it, not even himself. His abnormality is so pointless that he just functions like your average stickman, infact it leans more towards being an inconvienence cause he needs to get head accessories specifically tailored to fit his block head... He wants to figure out why he has a block head.

"What am I..... Why do I even exist..... Why am I like this???" -Howard having an existential crisis probably

^^^such a miniscule detail but his hair is fluffy and when he puts his hat on it makes his hair sad and flat (this is visible in the last post i made of him and Luccille)

In terms of personality, he's a chaotic fella and he likes to do dubious things. He's not exactly stupid, he just likes pulling stupid stunts. He is kinda selfish and doesn't really care for other's lives that much. He doesn't mind killing people, which is kinda reflective on how the CCC would do anything to terminate chaos. If its for the better, he'd hurt someone without thinking much about it. (Meeting Luccille makes him start to question this way of thinking)

Oh and some miscellaneous stuff, his primary weapon choice is a pipe wrench. He also uses other tools like crowbars and regular wrenchs, its just that he prefers the pipe wrench out of all of his choices. When he's not busy trying to figure out what he is, Charlie is particulary interested in the Toppat Clan. The toppat clan is a chaotic nightmare for the CCC!!!! (genuine question, how does the CCC respond to anomalous things in the toppat clan..) Anyways, Charlie is quite fascinated by the process of fusion, it seems that fusion is an advantage used by the toppats in battle.

Idk what else to add.... If i remember any missing info I'll edit this post!!!

[itcamefromthetoybox]

Action Master Galvatron

Back in the 1980’s, Hasbro’s Transformers toy designs and how they looked in the cartoon and comics didn’t always match up. Sometimes, this would be as drastic as Ironhide, where the figure didn’t even have a head, or Bumblebee, who didn’t have a mouth. And sometimes it would be like Galvatron, where the colors were just wildly different. The thing is, lately, Galvatron’s toy colors have been making a comeback, so when I saw this figure, I wanted to take a look and see how the colors hold up! So this week, we’re looking at “Transformers ReAction Figure Galvatron G1 Retro!”

Once upon a time, Hasbro decided they needed to make more money and that the best way to do that was to clean the slate of their Transformers cast to bring in new characters to sell to kids. So, they put out an animated movie and traumatized kids all over the world by graphically killing almost all their favorite characters from the hit cartoon and by having Optimus Prime die in a hospital bed, surrounded by the new guys and the very few of his friends who were still alive. …Yeah, this went over with kids and parents as well as you would expect. Megatron, meanwhile, had a slightly different fate: A giant space-monster-robot shaped like a planet “transformed” him (See what I did there? My English degree at work.) into the mighty Galvatron, who would be the main villain of season 3 of the original cartoon and would go down in history as the most psychotic Decepticon of all.

The ReAction Figures are a line of retro-styled toys created by Super7, a company known for retro-style toys and generally fun nerd stuff. The figures are meant to emulate the toys of the 1970’s-80’s, and include just a massive amount of stuff. He-Man, The Simpsons, Terminator, Big Trouble In Little China, and even heavy metal band mascots are just a few of the many, many franchises you can find in the ReAction line.

The way the line approaches Transformers is pretty interesting. Since the figures aren’t able to transform, the toys are instead incredibly faithful recreations of the animation character models, with the exception of Unicorn, who is based off an unreleased figure. This actually has precedent in Transformers; in the 1980’s, Hasbro did a line called “Action Masters,” which were Transformers that didn’t transform and instead came with transforming accessories, resulting in a higher level of show accuracy. The ReAction Transformers don’t come with the accessories, but the lack of the need to turn into something means that the toy makers can put more effort towards recreating the character from the TV screen.

Galvatron’s sculpt is an almost exact replica of his TV appearance, which looks really great. The one real exception is that his arm-mounted gun is mounted at an angle, and that’s due to the laws of physics necessitating that compromise to keep the gun looking good without clipping into his arm, Color-wise, he’s very different from the usual all-purple Galvatron. Like I said earlier, these are the colors of the original Galvatron toy, but they’re applied to Galvatron’s character model. Personally, I love these colors on him. They go together well, making for a striking figure, and make me really see this guy as an upgraded Megatron. The translucent barrel of his gun’s a really nice touch, as well. It’s clear a lot of work went into this paint job. My one complaint, though, is Galvatron’s face. 

How do you know he’s an improvement from Megatron? He actually killed Starscream.

The dark grey used for his face makes it hard to make out the sculpting on it, though there is sculpting, and the dark red of his eyes makes his eyes blend into his face. I have to hold him up to my eyes to even make out any details.

Galvatron shares the same articulation as most ReAction figures: his arms swivel up and down, his legs move, and his head turns. Nothing too dynamic. There are a few things to watch out for. His shoulder pieces actually block his arms from a full 360 motion, though that’s not something that would really come up much in play, and you need to be careful how you grip his head to turn it so you don’t bend his horns.

Galvatron! With the power to shake his fist in rage!

Galvatron comes with no accessories, and this is very much a good thing. His hands are solid, with no way to hold anything, so any accessories he did come with would have to be set aside. It does irk me a bit, honestly, because I would have liked him to be able to hold something, and I feel this limits him a bit.

Just gonna sit here and chill.

“Reaction Figure Galvatron G1 Retro” stands at about 3.75 inches, which makes his $18 price tag, the standard price for ReAction figures, hurt. He’s a Target exclusive and is very much a collector’s item, with his packaging recommending him for ages 14+. I feel that his limited articulation and inability to transform mean that he’s a collectable best suited for people who display their toys on shelves or in the packaging, since he can’t pose or hold anything. Would I recommend him? Honestly, while I do really like him as a collectable, that price tag really irks me. I just can’t recommend him for that price. Wait until he’s on sale or you have a gift card. This is JS signing off and wishing you Happy Toy Hunting!

[theverumproject]

Writeblr Interview Tag!

Thanks for the tag @darekasama

Tags: @teamarine777 + open tag!

Get on my tag list here

Short stories, novels, or poems?

Short stories are my good night and good morning stories. And I absolutely love to read novels. I loved to write short stories as a child, now I prefer to work on one big project, which is currently almost novel sized (Just need a few thousand more words!)

What genre do you prefer reading?

I love Sci fi and Horror mixed with romance (I am a ✨monsterfucker✨). Scientific literature is also embedded deeply into my heart. I swear I can feel my intelligence leveling up, like the green bar in The Sims, lol.

Are you a planner or a “write as I go” kind of person?

I'm a planner. Before I began writing The Robotic Era, I wrote down every major thing that's gonna happen and every single idea that came to my mind. 

What music do you listen to while writing?

I don't listen to any music. Thoughts are like noise to me. So when I write, I can't have more actual noise in my ears than in my head. Music is more like a tool to block inside and outside noises.

Favorite books/movies?

I just finished 21 Lessons for the 21st Century by Yuval Noah Harari a few weeks ago. I really enjoyed reading it! It gave me a lot of insight into our world and how we work. I really recommend it! Definitely up there with my favorites. I also read the autobiography of an African Woman a few years ago. From her childhood, when she fled from being married, to how she became a model. It is beyond me how I read a book of such size in one afternoon. Sadly I forgot what it was called.

As for movies, my favorite one is Interstellar. I also love Bumblebee, the Alien movies, the Terminator movies, Wall-E and more of the sorts. I'm also a sucker for horror, especially the classic slasher movies. While no horror movie really scares me, there was only one that ever chilled me; The Blair Witch Project. I still slept like a baby afterwards though, lol. But I guess atmospheric horror (or whatever you call it) gets me the most.

Any current WIPs?

The Robotic Era is the second book I'm working on. It's part of the Verum Series.

If someone were to make a cartoon out of you what would your standard outfit be?

I have a few personas, so I'm gonna show two of them. The one for this account and the one that I call my IRL sona.

The one for this account is just a black entity that's drawn with minimal effort.

The IRL sona is also drawn with minimal effort. It wears a black shirt with “Slapknutz” written on it three times. The text is too big for the shirt, so it always hangs halfway in the air. There's a black long sleeve shirt underneath it. The jeans are black with a chain/s attached to it. It wears black leather boots on its feet. The mustache, beard and top hat are all optional accessories.

Awww look! They're holding hands!

Create a character description of yourself: 

Oh no… Oh nooo… I'll just do appearance and personality, you don't need to know much more than that, lol. Well, actually, you don't need to know anything about me, since I'm just here to write, technically. But oh well… 

I'm gonna do this in first person though, since any other way would feel a little weird.

Man, that would just be me talking about myself, fuck. Now stop yapping, me, and tell something about yourself! (Is this procrastination?)

Appearance: Everything about me is loooong. My hair (which reaches just past my butt), my legs, my fingers, my nose, my forehead, my clothes (always long jeans and sleeves), hell, even my toes are fucking long for some reason! My clothes are always black and a friend always calls me a “langer, schwarzer Strich in der Landschaft” (long, black line in the landscape), also because of how tall and thin I am. My skin is pale, my hair is brown and my eyes are green brown (in a certain lighting I think they are a shade of unhealthy piss, lol), there's not much more color to me than that. Except for the band T's that I always wear, the pictures on it often have color. When you see me, it's pretty obvious that I'm a metalhead. A coworker once told me that I look like a “badass elf”.

Personality: I did a Myers-Brigg personality test a few years ago and it said that I'm an INFJ, but Idk if it was/still is accurate. 

The first thing that I always say is that I am a creative person. I think my creativity is what makes me me, without it, I'm dead. Then there's curiosity, I love to learn about all kinds of fields of science. This is also were a lot of my inspiration (as a Sci fi author) comes from. I'm very quiet. I went to a LGBTQ place thingie once (been there before, but that was the first time alone). I sat there for three hours and said nothing, couldn't say anything. I was told by a guy that he had never met such a quiet person as me. I do like to talk, but I'm horrible at it when there's a group of people. I also need a person that is more talkative than I am.

I really like to work. I don't feel like I am, but I've been told that I am a very trustworthy and punctual individual. If I have a job, I will finish it with good quality. Though I think that's just a basic trait that everybody should have. I feel like I am almost a perfectionist, but if something frustrates me too much, I will give up/leave it be. 

I also constantly daydream and listen to the music in my head. I truly live in my own world, while still functioning normally in the real one.

This monday, a person told me that I remind them of Ozzy Osbourne, something about “the way I'm standing there”. She said it makes her think of that one video.

Ok, this is already wayyyy to much…

Do you like incorporating actual people you know into your writing?

Nope, never done it.

Are you kill happy with your characters?

Ohhhh yes! People die in most parts of TRE.

Coffee or Tea while writing?

Coffee makes me nauseous, but I like tea! Drink it every morning and evening.

Slow or fast writer?

I'm rather slow. I'm slow in everything that I do, actually.

Where/who/what do you draw inspiration from?

Science and random other things that I encounter in the world. Sometimes characters and other things randomly appear in my head though. Just today, while on the bus, a robot that I have never seen or thought about in my entire life just appeared in my head. Who the fuck are you and what do you want? You look cool, but please let me forget you, I already have way too many robot characters.

If you were in a fantasy world, what would you be?

Like fantasy fantasy? I'd be a scientist, doing my science stuff, like staring at the stars, thinking about atoms and electricity, making hydrochloric acid and finding uranium for fun. But then the church starts to think I'm doing witchcraft and burns me at the stake :(

Most fav book cliche:

I have always liked reading books where the MC is absolutley traumatized, depressed and suicidal with a future love interest that absolutley hates them. Fuck, suffering tastes good!

Least favorite cliche:

Misunderstandings/miscommunication. Just fucking talk to each other, idiots!

Favorite scene to write?

I kind of enjoy writing dialogues where two characters are just having some fun. Something that's lighthearted with a little teasing and some non serious bickering

Reason for writing?

Science and having to let everything out of my brain before it gets overfilled, stuff falls out and gets lost.

[blackbox0]

Elevate Your Travel Experience with The Black Box Co.’s Passport Holder Cover

Traveling can be one of life’s greatest joys, offering opportunities for exploration, relaxation, and adventure. However, managing the essentials of your journey, like your passport, can sometimes become a hassle. This is where The Black Box Co.’s passport holder cover steps in to simplify and enhance your travel experience.

Why a Passport Holder Cover?

A passport holder cover is more than just a stylish accessory. It serves a practical purpose by protecting your passport from wear and tear, ensuring that it remains in pristine condition. For frequent travelers, this is particularly important as passports are exposed to various conditions, from bustling airport terminals to crowded city streets.

The Black Box Co. understands the significance of this small but crucial item. Their passport holder cover combines functionality with elegance, designed to cater to the modern traveler’s needs. Let’s delve into what makes their passport holder cover a must-have for anyone embarking on a journey.

Premium Quality and Design

The Black Box Co. is renowned for its commitment to high-quality craftsmanship. Their passport holder cover is no exception. Crafted from premium materials, the cover ensures durability and long-lasting use. The choice of materials not only provides a luxurious feel but also offers protection against the rigors of travel.

The design is both sleek and practical. Available in various colors and finishes, it appeals to diverse tastes while maintaining a professional and sophisticated look. The cover is designed to fit most standard passports, ensuring compatibility and ease of use.

Features That Enhance Your Travel Experience

Durable Protection: The passport holder cover shields your passport from damage. Whether it’s spills, scratches, or general wear, this cover acts as a barrier, preserving the integrity of your important document.

Multiple Compartments: Beyond holding your passport, The Black Box Co.’s cover typically includes additional compartments for other essentials such as boarding passes, credit cards, and travel documents. This feature helps keep everything organized and easily accessible.

RFID Protection: In today’s digital age, security is paramount. Some passport holder covers from The Black Box Co. include RFID-blocking technology, which protects your sensitive information from unauthorized scans and potential theft.

Elegant Aesthetics: The Black Box Co. excels in combining style with functionality. Their passport holder cover boasts a refined appearance that complements any travel attire. The attention to detail in design ensures that you travel with a touch of class.

Compact and Lightweight: The cover is designed to be slim and lightweight, fitting comfortably into your pocket or travel bag. This ensures that it’s easy to carry without adding bulk to your luggage.

The Perfect Travel Companion

Whether you’re heading out on a business trip or a leisurely vacation, The Black Box Co.’s passport holder cover is an ideal travel companion. It not only protects your passport but also adds a level of sophistication to your travel essentials. The thoughtful design and premium quality reflect The Black Box Co.’s dedication to enhancing your travel experience.

How to Choose the Right Passport Holder Cover

When selecting a passport holder cover, consider your specific needs and preferences. Evaluate factors such as material, color, and additional features like RFID protection. The Black Box Co. offers a range of options, ensuring that you find a cover that aligns with your style and requirements.

In conclusion, a passport holder cover from The Black Box Co. is more than just a protective accessory; it’s a blend of style and practicality that enhances your travel experience. With its superior quality, elegant design, and functional features, it’s an investment in both convenience and sophistication. As you prepare for your next journey, consider The Black Box Co.’s passport holder cover as a valuable addition to your travel essentials.

Whether you’re a frequent flyer or an occasional traveler, make your trips smoother and more stylish with a passport holder cover from The Black Box Co. Your passport — and your travels — deserve the best.

[samirtrading]

Control Panel Accessories Supplier in Ahmedabad - Samir Trading

Electrical Control Panel Accessories Wholesalers in Ahmedabad - Samir Trading

Samir Trading stands as a premier wholesaler in Ahmedabad, specialising in Electrical Control Panel Accessories. We take pride in offering a comprehensive range of high-quality products that cater to the diverse needs of panel assembly across various industries.

As a reliable supplier, we understand the critical role that control panel accessories play in ensuring the functionality and safety of electrical systems. Our inventory includes a wide selection of accessories such as cable glands, terminal blocks, indicators, push buttons, enclosures, and more. Each product is sourced from reputable manufacturers known for their commitment to excellence and adherence to industry standards.

OUR PRODUCTS

1.Cable Ties:

2. Control Panel Accessories

3. Cooling Solution:

4.Copper lugs:

5.Heat Shrinkable sleeves:

6.Wiring accessories :

What sets Samir Trading apart is our dedication to customer satisfaction. We strive to provide not only top-notch products but also personalised service and support. Our knowledgeable team is ready to assist you in selecting the right accessories that best suit your specific requirements, ensuring seamless integration and optimal performance of your electrical control panels.

Whether you are involved in industrial automation, manufacturing, construction, or any sector that relies on efficient electrical systems, we have the expertise and resources to meet your needs effectively. Our competitive pricing and commitment to timely delivery further reinforce our reputation as a preferred supplier in Ahmedabad.

At Samir Trading, we prioritise building long-term relationships with our clients based on trust, reliability, and mutual success. We continually update our product offerings to keep pace with technological advancements and industry trends, ensuring that you have access to the latest innovations in control panel accessories.

Partner with Samir Trading for your electrical control panel accessory needs and experience firsthand our dedication to quality, service, and satisfaction. Contact us today to learn more about how we can support your projects with our extensive range of products and expertise in Ahmedabad and beyond.

For More Information:

666/5A, Mamunayak's Pole, Nr. Jagat Agencies, Gandhi Road, Ahmedabad - 380001.

792217 0118

samirtradingcorp@gmail.com

[heaterssensors]

As a leading Thermocouple Accessories Manufacturer, we specialize in producing high-quality components that enhance the performance and reliability of thermocouples used in various industries. Our product range includes thermocouple connectors, terminal blocks, extension and compensating cables, mounting brackets, protection tubes, and other essential accessories designed to meet the rigorous demands of temperature measurement applications.

[electronalytics]

Cord-end Ferrules Market Analysis, Outlook & Forecast till 2033

Introduction

Cord-end ferrules, also known as wire-end ferrules or bootlace ferrules, are small cylindrical metal tubes used to terminate stranded wires. They are typically made from tin-plated copper and are designed to provide a secure connection and prevent fraying of the wire strands when connected to terminal blocks or other electrical connectors. These components are essential in various industries, including electrical, automotive, telecommunications, and industrial machinery, ensuring reliable and efficient electrical connections.

Market Dynamics

Drivers

Growth in Industrial Automation: The increasing adoption of industrial automation and control systems is driving the demand for cord-end ferrules. These systems require reliable and secure electrical connections, which ferrules provide by preventing wire fraying and ensuring consistent connectivity.

Expansion of Electrical Infrastructure: The expansion and upgrading of electrical infrastructure, particularly in developing regions, are boosting the demand for cord-end ferrules. They are crucial for ensuring safe and reliable connections in electrical installations.

Stringent Safety Regulations: Regulatory standards that emphasize safety and reliability in electrical connections are driving the adoption of cord-end ferrules. These components help meet these standards by providing secure terminations and reducing the risk of electrical failures.

Increasing Adoption in Automotive Industry: The automotive industry is a significant user of cord-end ferrules, especially in wiring harnesses and electrical systems. The growing complexity of automotive electronics and the shift towards electric vehicles (EVs) are further fueling demand.

Challenges

High Competition and Price Pressure: The cord-end ferrules market is highly competitive, with many manufacturers offering similar products. This competition can lead to price pressure, affecting the profit margins of manufacturers.

Quality Control Issues: Ensuring consistent quality in mass production can be challenging. Poor-quality ferrules can lead to unreliable connections, posing risks in critical applications.

Technological Advancements: Rapid advancements in connector technology may pose a challenge as newer, more efficient connection methods could potentially reduce the reliance on traditional cord-end ferrules.

Market Trends

Miniaturization and High-Density Applications: As electronic devices and systems become smaller and more complex, there is a growing demand for miniaturized cord-end ferrules that can handle high-density applications while maintaining reliable connections.

Sustainability and Eco-Friendly Solutions: There is a trend towards using environmentally friendly materials and manufacturing processes. This includes the development of ferrules made from recyclable materials and processes that minimize environmental impact.

Enhanced Safety Features: Manufacturers are focusing on enhancing the safety features of cord-end ferrules, such as developing products with better insulation properties and more secure connections to meet stringent safety standards.

Customized Solutions: Increasing demand for customized solutions to cater to specific applications and requirements is a significant trend. Manufacturers are offering tailored ferrules with specific dimensions, materials, and insulation types to meet diverse customer needs.

Receive the FREE Sample Report of Cord-end Ferrules Market Research Insights @ https://stringentdatalytics.com/sample-request/cord-end-ferrules-market/15892/ 

Market Segmentations:

Global Cord-end Ferrules Market: By Company Partex HUA WEI Optimas Molex Weidmuller Truex CPC Ease Cable Accessories ABB 3M Miromar DKSH Cembre Hubbell Global Cord-end Ferrules Market: By Type Insulated Non-insulated Global Cord-end Ferrules Market: By Application Residential Industrial Commercial

Regional Analysis of Global Cord-end Ferrules Market

All the regional segmentation has been studied based on recent and future trends, and the market is forecasted throughout the prediction period. The countries covered in the regional analysis of the Global Cord-end Ferrules market report are U.S., Canada, and Mexico in North America, Germany, France, U.K., Russia, Italy, Spain, Turkey, Netherlands, Switzerland, Belgium, and Rest of Europe in Europe, Singapore, Malaysia, Australia, Thailand, Indonesia, Philippines, China, Japan, India, South Korea, Rest of Asia-Pacific (APAC) in the Asia-Pacific (APAC), Saudi Arabia, U.A.E, South Africa, Egypt, Israel, Rest of Middle East and Africa (MEA) as a part of Middle East and Africa (MEA), and Argentina, Brazil, and Rest of South America as part of South America.

Click to Purchase Cord-end Ferrules Market Research Report @ https://stringentdatalytics.com/purchase/cord-end-ferrules-market/15892/?license=single 

Key Report Highlights:

Key Market Participants: The report delves into the major stakeholders in the market, encompassing market players, suppliers of raw materials and equipment, end-users, traders, distributors, and more.

Comprehensive Company Profiles: Detailed company profiles are provided, offering insights into various aspects including production capacity, pricing, revenue, costs, gross margin, sales volume, sales revenue, consumption patterns, growth rates, import-export dynamics, supply chains, future strategic plans, and technological advancements. This comprehensive analysis draws from a dataset spanning 12 years and includes forecasts.

Market Growth Drivers: The report extensively examines the factors contributing to market growth, with a specific focus on elucidating the diverse categories of end-users within the market.

Data Segmentation: The data and information are presented in a structured manner, allowing for easy access by market player, geographical region, product type, application, and more. Furthermore, the report can be tailored to accommodate specific research requirements.

SWOT Analysis: A SWOT analysis of the market is included, offering an insightful evaluation of its Strengths, Weaknesses, Opportunities, and Threats.

Expert Insights: Concluding the report, it features insights and opinions from industry experts, providing valuable perspectives on the market landscape.

Report includes Competitor's Landscape:

➊ Major trends and growth projections by region and country ➋ Key winning strategies followed by the competitors ➌ Who are the key competitors in this industry? ➍ What shall be the potential of this industry over the forecast tenure? ➎ What are the factors propelling the demand for the Cord-end Ferrules? ➏ What are the opportunities that shall aid in significant proliferation of the market growth? ➐ What are the regional and country wise regulations that shall either hamper or boost the demand for Cord-end Ferrules? ➑ How has the covid-19 impacted the growth of the market? ➒ Has the supply chain disruption caused changes in the entire value chain? Customization of the Report:

This report can be customized to meet the client’s requirements. Please connect with our sales team (sales@stringentdatalytics.com), who will ensure that you get a report that suits your needs. You can also get in touch with our executives on +1 346 666 6655 to share your research requirements.

About Stringent Datalytics

Stringent Datalytics offers both custom and syndicated market research reports. Custom market research reports are tailored to a specific client's needs and requirements. These reports provide unique insights into a particular industry or market segment and can help businesses make informed decisions about their strategies and operations.

Syndicated market research reports, on the other hand, are pre-existing reports that are available for purchase by multiple clients. These reports are often produced on a regular basis, such as annually or quarterly, and cover a broad range of industries and market segments. Syndicated reports provide clients with insights into industry trends, market sizes, and competitive landscapes. By offering both custom and syndicated reports, Stringent Datalytics can provide clients with a range of market research solutions that can be customized to their specific needs.

Reach US

Stringent Datalytics

sales@stringentdatalytics.com

+1 346 666 6655

Social Channels:

Linkedin | Facebook | Twitter | YouTube

[digitalspellcraft]

Travel Essentials- The Best Backpacks and Luggage for Digital Nomads

In the wanderlust-driven life of a digital nomad, every destination is a new office and every journey is an untold story. For those who carry their work wherever they go, finding the right travel gear is not just a matter of convenience, it is a necessity. At DigitalSpellCraft LLC, we understand that the tools you carry influence the magic you create. Today, we delve into the realm of travel-friendly backpacks and luggage that stand as reliable companions for every digital nomad.

1. The Tech-Savvy Trekker: Smart Backpacks

For those who blend the art of travel with the science of technology, a smart backpack is an indispensable ally. Designed with the digital nomad in mind, these backpacks come equipped with built-in USB charging ports, RFID-blocking pockets, and ample compartments for gadgets. One such marvel is the Nomadic Life SmartPack. Crafted from water-resistant fabric and featuring ergonomic design, this backpack charges your devices on the go while keeping them secure from the elements and potential theft.

2. The Minimalist Mover: Sleek Carry-Ons

Embracing the minimalist philosophy can make your nomadic ventures not only lighter but more profound. The Jetsetter Slim Carry-On offers a sleek, compact design ideal for those who travel light but pack powerful. Its compartments are perfectly sized for laptops, tablets, and essential tech accessories, all secured in stylish, durable material. Its 360-degree rotating wheels and adjustable handle make navigating through busy terminals a breeze, and its overhead bin compatibility makes it perfect for quick getaways.

3. The Enduring Explorer: Durable Luggage

Sometimes, the journey demands more than just a backpack. For extended travels, the VoyagePro Roller Suitcase stands out as a fortress for your belongings. With high-density, weather-resistant material, it protects against the harshness of travel. Its spacious interior, coupled with segmented pockets, allows for organized packing of both tech gear and personal items. The smooth glide wheels and strong telescopic handle are designed to handle cobblestones and corridors alike.

4. The Hybrid Hiker: Convertible Bags

Why choose between a backpack and a suitcase when you can have both? The TravelFlex 2-in-1 Hybrid offers the ultimate versatility with its transformable features. It starts as a rolling suitcase, perfect for those airport sprints, then converts into a backpack for hands-free mobility on uneven terrains. This hybrid comes with padded laptop sleeves, hidden pockets for valuables, and a modular design to adapt to both urban landscapes and rugged adventures.

Bringing It All Together

Each journey is unique, and so is each digital nomad. Choosing the right travel gear involves considering your specific needs, destinations, and the nature of your work. Whether you opt for a smart backpack, a sleek carry-on, durable luggage, or a convertible bag, ensure it aligns with your travel style and functional necessities.

At DigitalSpellCraft LLC, we celebrate the spirit of adventure mingled with creativity. As you traverse the globe, let your travel gear be as adaptable and proficient as you are. Remember, in the right bag, lies the secret to a journey’s success. Safe travels and happy nomading!

For the digital nomads who visit every corner of the world, yet find their place everywhere they go, DigitalSpellCraft LLC offers not just services but experiences that enchant and empower your digital lifestyle. Let’s keep crafting spells, one digital solution at a time.

[contentpassstory]

Clorinces Travel Bag BDO: Unveiling the Perfect Travel Companion

Introduction: The Ultimate Travel Gear

At Clorinces, we understand the essence of seamless travel experiences. That's why we're proud to introduce our latest innovation, the Clorinces Travel Bag BDO. Designed to cater to the needs of modern travelers, this meticulously crafted bag offers unparalleled convenience, functionality, and style.

Superior Quality Craftsmanship

Crafted from premium materials, the Clorinces Travel Bag BDO exemplifies superior quality craftsmanship. Every stitch, seam, and detail is meticulously executed to ensure durability and longevity. Whether you're embarking on a weekend getaway or a globetrotting adventure, rest assured that your belongings are securely housed in a bag built to withstand the rigors of travel.

Innovative Design Features

Ergonomic Design for Comfort

The Clorinces Travel Bag BDO is thoughtfully engineered with an ergonomic design to provide maximum comfort during extended periods of use. Padded shoulder straps and a cushioned back panel alleviate pressure points, allowing you to carry your essentials with ease.

Ample Storage Capacity

Say goodbye to the hassle of packing and unpacking with the Clorinces Travel Bag BDO. Featuring multiple compartments, pockets, and organizers, this bag offers ample storage capacity for all your travel essentials. From clothing and toiletries to gadgets and documents, everything has its designated place, keeping your belongings neatly organized and easily accessible.

Versatile Functionality

Versatility is key when it comes to travel gear, and the Clorinces Travel Bag BDO delivers on all fronts. Whether you're navigating bustling city streets or traversing rugged terrain, this bag adapts to your needs. With convertible carrying options and adaptable storage solutions, it effortlessly transitions from backpack to duffel bag, providing unparalleled versatility for any travel scenario.

Enhanced Security Features

RFID-Blocking Technology

Protect your sensitive information from unauthorized access with the Clorinces Travel Bag BDO. Equipped with RFID-blocking technology, this bag safeguards your credit cards, passports, and other electronic devices from identity theft and fraud, giving you peace of mind wherever your travels take you.

Lockable Zippers for Added Security

Keep your belongings secure at all times with the Clorinces Travel Bag BDO. Featuring lockable zippers, this bag allows you to safeguard your valuables and deter potential thieves, ensuring that your possessions remain safe and secure throughout your journey.

Stylish and Functional

Sleek and Modern Aesthetic

Elevate your travel style with the Clorinces Travel Bag BDO. With its sleek lines, modern silhouette, and premium finishes, this bag exudes sophistication and elegance wherever you go. Whether you're strolling through airport terminals or exploring exotic destinations, you'll turn heads with this stylish travel companion by your side.

Practical Features for On-the-Go Convenience

In addition to its aesthetic appeal, the Clorinces Travel Bag BDO is designed with practical features to enhance on-the-go convenience. From built-in USB charging ports to detachable laundry bags, every detail is carefully considered to streamline your travel experience and make life on the road more enjoyable.

Conclusion: Your Ultimate Travel Companion Awaits

In summary, the Clorinces Travel Bag BDO is more than just a travel accessory—it's a lifestyle essential for the modern explorer. With its superior quality craftsmanship, innovative design features, enhanced security measures, and stylish aesthetic, this bag is the perfect companion for all your adventures near and far. Experience the ultimate in travel convenience and style with the Clorinces Travel Bag BDO.

[hkxytech]

Siemens 6GK5980-5EB00-0AA5 SCALANCE X accessory

Siemens 6GK5980-5EB00-0AA5 5-pole terminal block for PROFIBUS OLM V4; 1 pack = 5 units; spare part. Model: 6GK5980-5EB00-0AA5Categories: Industrial EthernetBrand: SiemensSiemens 6GK59805EB000AA5 SCALANCE X accessorySiemens 6GK5980-5EB00-0AA5 SCALANCE X accessory 100% New & Original. Quick Quote. Fast Delivery. Competitive Price. One year Warranty.Buy Siemens Industrial Ethernet products for your…

[twatkcox]

[The Keihancarl Diaries: February 10, 2024]

Kung Hei Fat Choi! Gong Xi Fa Cai! It’s me, Keihancarl, and today I’m going on yet another mall-hopping trip. To be honest, I’m both excited and nervous at the same time.

xxxxxxxxxx

For my second mall-hopping trip this year, I’m heading to Makati (Ayala Center) and Manila (Binondo), with a last-minute visit to Cubao (Araneta City). I’ve got lots to do, but my main goal is to visit the newly-opened One Ayala Mall (plus Gateway 2), and later, witness the scenes along Ongpin and the dragon dance. Hey, it’s the Year Of The Dragon, right?

I wear mostly black clothing, and I feel like wearing the Naruto shirt I bought at Uniqlo during my previous mall-hopping trip to the North. Actually, most of my outfit consists of the stuff I bought from Uniqlo in the past few months, plus some awesome accessories I bought online.

I left home at exactly 10:00 AM, and managed to get to MRT North Avenue a quarter past 11:00. Traffic is incredibly light along the way. It didn't take me long to get on the train as well.

Arriving at MRT Ayala Station, I noticed a Valentine’s Day set up right in front of the turnstiles. Once I got off the paid area, I loaded up my Beep card first since I'd be taking the LRT-1 going to Carriedo later, as well as the LRT-2 on the way back. After loading my card, I visited One Ayala Mall first.

The mall had a direct connection to the MRT, as well as a passenger terminal on the ground floor. There’s a supermarket and some food stalls at the basement level.

I visited a couple of bookstores, Fully Booked (which I almost missed due to its somewhat hidden location) and Biblio (relocated from Ayala Malls Cloverleaf). The latter had an impressive selection of books, including vintage ones.

Of course, the vintage ones are more pricey, but they’re more aesthetic-looking.

I also checked the MN+LA branch right beside it but couldn't find the drape jacket (the kimono-style jacket) like the one I saw at the SM North EDSA branch.

There's a dragon dance inside the mall, visiting every shop on each floor.

The mall centerpiece, an art installation called “The Course Of The Sun”, looks magnificent. There’s an awesome explanation about it in the railing.

The uppermost level (probably the mall's fifth floor) has not opened yet. Could that be the cinema area?

I then head to my next stop, SM Makati, via the bridgeway from One Ayala. I only checked Uniqlo, Crate And Barrel, and a couple of shops at the Cyberzone.

The entrance to Cyberzone feels kind of similar to the ones at The Block (SM North EDSA) bridgeway going to the City Center, but the LED screen is on the floor instead of the ceiling.

Next stop, Glorietta. I checked a few shops inside the mall, as well as the event at the Activity Center.

I decided to have lunch at MOS Burger. I ordered a Beef Yakiniku Rice Burger and a regular Salted Caramel Sumiyaki (iced). The yakiniku rice burger is great. It’s kind of weird that they also provided utensils considering that the rice burger is meant to be eaten like an actual burger, but I suppose not all people can eat it like that.

There's a standee featuring One Piece characters (the straw hat crew) right by the entrance. They also have some merch inside.

I then checked the Top Of The Glo (rooftop park), with K-Town on the left, and Japan Town on the right. I visited the latter first.

There were Japanese and Korean restaurants in the area. The Japan Town area had some (artificial) sakura (cherry blossom) trees, I think, along with the white lanterns. I wonder how it looked at night, I'll probably need to check it out on my next visit.

I then decided to head to Glorietta 5 and check out Uniqlo's flagship store. There's Uniqlo Cafe on the second level and an area where you can make your customized shirts.

I then proceed to my next stop, Greenbelt. I visited a few shops, including Muji and Fully Booked.

I managed to check Greenbelt 1 before they closed that area down for redevelopment. Unfortunately, Booksale had vacated their space. And so are a handful of shops, including National Book Store (they already closed that branch a long time ago). Most of the shops and restaurants are still open, but they’re expected to move out within a couple of months due to the redevelopment of the area (along with Greenbelt 2). Guess this will be the last time I get to see GB1 in its original form and design.

I stopped by Waltermart Makati on the way to the LRT-1 Libertad station. I only checked the National Book Store branch there.

I took the LRT-1 to Carriedo Station (from Libertad Station) and decided to walk from there to my next stop, Lucky Chinatown Mall.

Getting off the LRT station, I noticed that BPI had already moved out of the Art Deco Don Roman Santos building, hence the lack of signage. Moving on, I took a moment to check some interesting scenes near Ongpin.

Going there, I also noticed some dragon lamp posts along the way, and they looked awesome.

There were a lot of people in the area where a parade was being held. There were some giveaways too, from candies to red envelopes (containing money), bottled water to tikoy (rice cake).

I also get to see Tugue Zombie in one of the floats, and later, Samantha Bernardo in the Mestiza Beauty Soap float.

I was quite exhausted from dehydration and the crowd so I decided to take an alternate route leading to Soler. I reached the mall a few minutes later.

There's a dragon centerpiece at the atrium. And a luxury car (not pictured, unfortunately).

At the annex, I passed by Chapters And Pages. Like the other bookstores I visited earlier, I didn't find anything interesting.

I head to 999 Mall to have an early dinner at Chowking (food court). I was about to order my meal when the sound of the drums and the gong blared from the dragon and lion dance, making it harder for the cashier to understand what I was saying. It took me about 5 minutes before I could finally start choosing my order. I even had to repeat my order to make sure she got it right. I ate my food as soon as I got my order, not wanting to waste any more time.

I also passed by the stall where I used to buy my anime shirts, but it appears that they were closed for the Chinese New Year. I could hardly see any anime shirts on that stall, though, at least the ones that I used to buy.

Come to think of it, 999 Mall isn’t as crowded as before. It was the same situation during my last visit to the mall last year. I’m pretty sure it was the same thing with 168 Mall, but I could be wrong since I didn’t actually visit that mall during this trip. I didn’t bother to check some of the fashion stalls, as I don’t feel like shopping at the moment.

I went back to Lucky Chinatown Mall to take more selfies. The one by the bridgeway to the main mall was crowded with people who were also taking selfies. I tried taking a few selfies using my selfie stick, but it didn't turn out well. I simply gave up and went to the cinema area, but no luck taking selfies there either. The Prosperity Wing could be my last chance, and I somehow came up with a bunch of good selfies plus a 360 view of the area.

I passed by Metro Supermarket to buy a bottle of Pocari Sweat. The supermarket’s space was reduced, with the (former) second level now being occupied by Planet Sports and Abenson.

And it's time to go home. I decided to take the LRT-2 to Araneta Center-Cubao since I hadn't ridden that train for a very long time (still amused at the condom ads, though). Also, I feel like checking the Gateway Mall 2, which is actually a brand new extension to the original Gateway Mall. The extension also had access to the Araneta Coliseum as well.

While there, I passed by the Fully Booked branch and bought the book "No Longer Human" by Osamu Dazai–both the novel and the manga, which were both published by Tuttle. I’ve been eyeing these books since the MIBF 2023, those could’ve been awesome souvenirs from the event. Anyway, the cashier suggested the one with the other cover from a different publisher (the one with the pink cover), but upon checking the price, I just decided on the one I had in hand instead.

I checked some parts of Gateway Mall 2 for a while and later headed to the terminal and took the minibus to SM Fairview. Traffic was light along the way, not to mention that it was Chinese New Year. The trip only took less than an hour, just like earlier. I got home at exactly 10:00 PM.

xxxxxxxxxx

This is the first time I didn't encounter such an inconvenience on a mall-hopping trip. I managed to enjoy every single place I visited throughout the day, especially in Binondo. Despite getting only four hours of sleep last night, I somehow managed to make it through the entire day. It was pretty exhausting, but I really enjoyed it. And I get to ride all three rail lines on the same day for the first time since the pandemic. Not to mention that I get to visit two new malls, one of them is actually the extension of the original mall.

So, where to next? As always, I’m living in an uncertain time so there’s no telling when will the next mall-hopping trip happen. Hopefully, by April or May, depending on the situation. Will it be BGC next? Who knows?

Well then, time to conclude this one. Again, love, peace, and prosperity for the Year Of The Dragon! Xià cì jiàn! Until next time!

Most of the pics are from my Instagram account, @kcox_105. The selfie pics are exclusively uploaded to my private Instagram account, @kcox105.

[grad604chloeharrington]

20 Elements Body Copy

Book

I read the sequel to these books and really changed my perspective on books. These books really connected with me on a deeper level as many of the events that the characters went through were quite similar to my own and events that have happened in my family.  I want to use this process of connecting with an audience in my future designs to make more emotional connections with the audience.

Dog

This was my second teddy that I loved as a child. My childhood best friend and I both got these as our dream dogs were golden retrievers due to their friendly and gentle nature. I’ve always taken good care of this toy and she's still in great condition. This reflects back to myself as a creative as I take good care of my creative tool kit so it's lasted so long.

Poodle

This little poodle was my first-ever teddy and my favourite one in my childhood. This little dog came everywhere with me. To this day I have no clue why I gave it such a strange name and never really thought it was weird until I got older and really thought about it. Lamb-chop. It’s stuck through all my moves of different homes and cities I’ve lived in and still, somehow it’s sitting on my bed in my flat now… 20 years later. 

Fitness

Weights from a gym class I really enjoy. This Les Mills pump class is something that I and a couple of my close friends all do together and we all really enjoy it. To me, they represent self-growth and bonding closer as I don’t always enjoy or want to go but when my friends make me go with them I feel great after the class and spending time with them.  Its also a good mind reset for me as I often go when I’m struggling to think of new creative concepts.

Bracelet

My oldest sister gave me this bracelet for Christmas one year. Both of my sisters have this same bracelet that has been engraved with my name and my older sister’s name Brooke on the side. This is my most significant and meaningful piece of jewellery as I received it right before she was diagnosed with her terminal illness.

Headphones

My Beats headphones allow me to block out my surroundings and focus on whatever I put my mind to. They are my go to when I’m getting into my creative zone as they make me feel like the worlds stopped. They are also a huge help when I’m procrastinating as I will use them to go on a walk and reset my mind. 

Rings

My rings are something that I not only an accessories, but also as something I play with when I get anxious and stressed out.  They help me to feel secure and now I feel weird when I don’t have them on as I can’t fiddle with something if I get nervous. They all were given as gifts and most of them aren’t able to be replaced so they have that sense of uniqueness to me.

Shoes

These ceramic shoes are something that represents me and my sister when we were little. We always thought hers was the right and my one was the left shoe, as I’m left-handed and she is right-handed. These little shoes are always on display in our house ever since we have grown up no matter what house we have lived in.

Heart Bowl

I got this bowl crafted from wood and shells in Bali, which was a real eye-opening trip for me. The man who made the bowl didn’t have much and was the most happy and lovely person I had talked to in a while. He showed me how effortless it is just to be a great person, and this is something I’d like to put more into my design work to share to the future world.  

Wall

 Queenstown was always the place we went to escape Christchurch. I ended up moving there for a year after my parents split and I absolutely loved it. This wall in particular was something me and my sister spent a lot of holidays and hours sitting by. It was a place that just felt super safe. 

Glasses

I got these blue light glasses back in lockdown as I was pretty much glued to my device all day every day for way too long. They are also my go-to accessorise when I don’t feel amazing about myself as I feel like I can hide behind them in some sense. These glasses help me get into my creative zone as they add another layer to my having to focus as part of the process. 

Scrapbook

These are my scrapbooks I made while I was in preschool. These have always help so much importance to me as they captured and hold so many amazing memories and milestones in my childhood when times were not always so easy. I love flicking through them and seeing all my little drawings and art pieces i crafted. The collage style art was something I did often growing up and would like to start using it as a planning tool in future projects.

Waterbottle

I’ve recently noticed my habit I’ve picked up on always having my water bottle on me at all times. This was something a year ago i really wanted to improve on to benefit my overall health and wellbeing. It helps me feel like I’m staying in routine and is something I’m proud of now. I invested into a more expensive drink bottle as it keep my water really cold however its turned out to be average quality.  

Pens

These marker pens are my go to when I’m trying to create concepts or rough ideas in my initial start of any design process. They have these brush like tips that give me a sense of freedom when I’m just trying to get my ideas onto my paper. I originally started using them back in my graphics glass in high school when rendering building designs but now they are my all rounder.

Perfume

I received this perfume from my mum as my 18th birthday present and its one of my favourite perfume scents I’ve owned. Its one of the scents that a few of my great friends use that i met in uni halls last year and was something that we both immediately noticed as we meet. 

Laptop

My laptop is one of my more proud purchases at the end of last year my previous one broke. I decided to invest into a more design friendly version with higher specs which meant i had to work harder to get it. Its one of my assets I own that helps me do everything and without it id really struggle as now I also do a lot of my job in my laptop.

Sleep mask

My sleep masks are an essential for me when it comes to having a good sleep. They are my go to when i just want to escape any problems and fall asleep faster as i find them super comforting. All of the ones I own my mum has brought for me as stocking fillers for Christmas and they range from nice silk ones to funny animal ones. 

Candle

This candle is the same one that’s used in my home in Christchurch where all my family lives. Its the scent of lemon-grass and it just makes me have a piece of home in my flat. Its quite a comforting and fresh scent to me that is a really nice reminder of home when I’m missing it, as i don’t have any family in the north island. 

Highlighters

Highlighters are a key component when it comes to trying to process concepts in my head. I always have to print and highlight information to be able to fully understand the context of what I’m trying to learn. Also I love adding any sort of colour to a plain and boring document if its possible. 

Makeup brushes

My makeup brushes are used nearly everyday so they are a key component of my day to day assets. I have brushes for different products and applications, just like if i were doing any other sort of painting. Most of my brushes are all from the same Morphe brand collection however i do have a few rouge ones i have collected over the years that are amazing. 

[sasikumarppts]

Molex Distributor

Molex, the world's second-largest manufacturer of connectors, is a leader in interconnect technology currently offering over 100,000 products supporting the full range of electronics markets including: medical electronics, automotive, non-automotive transportation, industrial controls and datacom. Heilind Electronics, Inc. (www.heilind.com) is one of the world's leading distributors of connectors, relays, switches, thermal management & circuit protection products, terminal blocks, wire & cable, wiring accessories and insulation & identification products.