ascentgateacademy02-blog

[ascentgateacademy02-blog]

Sewer Blockage/Clogged Drain In Milford, Ma Part - III

MAIN LINE SEWER TRAPS

The Old Method of Trapping Sewer Gas.

In areas of Massachusetts and Rhode Island, sewer blockages and clogged drains are often the result of having a main line trap. Main line sewer traps were originally installed with a few purposes in mind. One reason to install a trap on the sewer line was to literally trap debris or objects accidentally finding their way into the sewer line. Intended to be easy, trap cleanouts were installed with the idea of a home owner being able to remove the obstruction by removing clean out plugs and physically removing the items in the trap. The vision was lost somewhere in history and main line sewer traps have shown up in places where they are difficult to service from day one of their installation.

Throughout Rhode Island, a drain cleaning technician will encounter difficulty with main line traps being buried in such cities as Pawtucket, Cranston, Providence and Woonsocket. The locations around South Eastern Massachusetts where a sewer trap may or may not be installed are not consistent. For Example, throughout New Bedford, the drain cleaning technician may find a street where a few houses have traps and others do not have main line sewer traps.

Reasons for drain cleaning difficulty

•             the trap itself inhibits the ability of the sewer and drain cleaning technician from getting the sewer cleaning cable across the trap. So, the outlet side of the trap must be opened.

•             the trap may not have been opened in decades. For the sewer and drain cleaning tech., this often means cutting the cap out or using a chisel to pry it out.

•             the trap is often buried in the ground, making the task of opening the trap impossible for sewer and drain cleaning technicians. This would then mean the technician will have to play a game of skill against the trap to manipulate a cable or a jet hose through the trap to clear the clogged sewer line.

More purpose was given to main line sewer traps. Traps were installed in mainline residential sewers to prevent sewer gas and rodents from entering the house and allow the home owner an opportunity to prevent sewer blockage by trapping foreign objects that are not flushable. However, if the trap is not serviceable, and buried in the earth, one of the advantages to having a trap is gone.

House traps are also irrelevant due to the fact once the piping on the house side of the trap becomes soiled, noxious and dangerous gases still infiltrate the home. So, the practice of installing a trap at every fixture in the house was implemented.

Having a house trap in the mainline and a trap at a fixture is what is known by plumbers and drain cleaners as double trapping. The international plumbing code forbids double trapping. Double trapping in itself can inhibit the flow of sewage and promote sewer and drain back-ups. So, it is worth having the main line trap removed in order to avoid inconvenience and costly sewer clogs.

House traps are very common in Pawtucket, Rhode Island; Cranston, Rhode Island; Providence and Woonsocket. However, they are spotty and often unpredictable as to where the sewer and drain cleaning professionals will find them with in the cities of Massachusetts.

Diagnosing and fixing the drainage problem for a sink, shower or bathtub may be a long and difficult process. Be safe. If fixing the issue is something that is risky or not being understood, contact a drain service company. The range of pricing for a company who cares to do the job correctly is within $145.00 – $225.00. Main sewer line cleaning service can cost $245-$365. This depends on material used in piping, age of the house which would help the plumber understand the plumbing code that was used in assembling the plumbing system, access to the plumbing and what is assumed to be creating the blockage.

For more details on our products and services, please feel free to visit us at Garbage Disposal Not Working in Franklin, Ma, Septic Tank Problems in Franklin, Ma & Septic Tank Maintenance in Franklin, Ma

[ascentgateacademy02-blog]

Sewer Blockage/Clogged Drain In Milford, Ma Part - II

DIAGNOSE A GARBAGE DISPOSAL

Garbage disposers are among the worst offenders when having kitchen sink back ups. This is usually the result of an object, inadvertently being washed into the sink drain and impeding the grinding chamber. (NOTE: Garbage disposers are intended as a companion to the dishwasher. Therefore, garbage disposals are to be used for disposal of small food particles and biodegradable organic matter that arrives in the sink while rinsing dishes.) In the event the garbage disposal is jammed due to a foreign object falling into the grinding chamber, without notice, the disposer’s circuitry will overload and cut out power before the garbage disposer will overheat and self destruct. If your disposal does not make a sound when turned on, the internal circuit breaker has tripped. Do not attempt to reset this until you have determined why the circuit has been interrupted. Resolve the cause first. Though the circuit breaker is tripped, be sure the switch supplying power is in the off position. You may even want to disconnect power from the main circuit panel as an extra safety precaution.

Here are the steps to trouble shooting the garbage disposer:

1.            Before looking into the disposer, be sure power is disengaged and there is no way anyone will inadvertently supply power to the garbage disposal while you are working on it.

2.            Use a flashlight and peer into the grinding chamber of the disposer.

3.            If you see an object that would obstruct the ability for the grinding chamber to move, look for a 1/4″ allen wrench. Most garbage disposals come with a 1/4″ allen wrench.

4.            Beneath the garbage disposer, in the center, you will see a hexagonal hole. This is where you will use the 1/4″ allen wrench. Turn the kitchen sink faucet on, if the sink still drains. Insert the allen wrench in the hexagonal hole beneath the disposer. Begin working the wrench clockwise and counter clockwise. This should help work the obstruction loose. When the chamber feels it is moving more freely than when you first started working with the wrench, turn the faucet off. Reach into the disposer (all power off) and remove the obstruction.

5.            Back to the bottom of the disposer, find a button. This is the internal circuit breaker for the garbage disposal. Push it. Resupply current to the garbage disposer switch if you turned it off at the breaker panel. Turn the water on, then the switch. The garbage disposer should work if it has not burned itself out. If there is still debris left in the grinding chamber, you will need to repeat these steps.

Avoid using a plunger. Only plunge the disposer as a last option. Plunging could force the seals in the disposer out of place and create leaks.

Diagnosing and fixing the drainage problem for a sink, shower or tube may be a long and difficult process. Be safe. If fixing the issue is something that is risky or not being understood, contact a drain service company. The range of pricing for a company who cares to do the job correctly is within $145.00 – $225.00. This depends on material used in piping, age of the house which would help the plumber understand the plumbing code that was used in assembling the plumbing system, access to the plumbing and what is assumed to be creating the blockage.

Adding a garbage disposal unit to an old drain line, composed of cast iron or galvanized pipe is not recommended. This can be done. However, the piping material will develop pitting inside the pipe. This will provide a place for food particles to lodge. Then, more particles are added. You may not see a problem for quite a while. However, where the food particles are building, bio-mat is also building in the line. Here, you now have the problem of carbon material and moisture stuck in place. Using the idea of having a protein stain on an article of clothing being laundered; you would use a protein detergent to remove the stain. The same principle applies here, carbon material such as decaying food, lies against the pipe, which is also a carbon material. This aides in weakening the walls of the pipe.

For more details on our products and services, please feel free to visit us at

Clogged Sink in Franklin, Ma

,

Clogged Toilet in Franklin, Ma

&

Septic problems in Franklin, Ma

[ascentgateacademy02-blog]

Sewer Blockage/Clogged Drain In Milford, Ma Part - I

WATER JETTING

Sewer and drain back ups occur for a variety of reasons. Grease build up is probably among the worst of all sewer and drain clogs.

If your sewer line has grease buildup, cabling the sewer to restore flow is an option. However, cabling a grease laden drain does not offer optimum results. The grease may remain soft, in which case, the cable passes through and extracts as a table knife does in peanut butter. Meaning, the grease closes behind the cable. If grease hardens, (it will, given enough time) be penetrable. However, the blockage reacts much the same way as clay would to a tooth brush. The hardened grease can be eroded away, against the friction of the cable and cutting blade. The question remains, how much of the grease remains and how big of an opening did the sewer cable make in the hardened grease?

Fortunately, by today’s standards of drain and sewer cleaning technology, we have “high pressure water jetting”. Take a look at the following video by Super Jet Hydrojetting as seen on YouTube…

Hydro jetting is done by forcing high pressure water through orifices as fine as a human hair. A jet may be as powerful as 4000 psi.. Forcing this much pressure through an orifice as narrow as a hair produces a violent lashing on whatever is within the range and effective reach of the jet. In this video, the whole chicken placed in the sewer line was completely shredded.

If your sewer or drain lines have soft or hardened grease clogs or, blockages formed by sludge, water jetting is the way to go to ensure a clean, viable sewer or drain line.

Diagnosing and fixing the drainage problem. Be safe. If fixing the issue is something that is risky or not being understood, contact a drain service company. The range of pricing to clear branch lines for a company who cares to do the job correctly is within $145.00 – $225.00. This depends on material used in piping, age of the house which would help the plumber understand the plumbing code that was used in assembling the plumbing system, access to the plumbing and what is assumed to be creating the blockage. Sewer cleaning service can be from $225-$365. Jetting, $465-$700 (for non-franchised companies). A franchised company like Roto Rooter may cost as much as $1,200.00 to have jetting done.

For more details on our products and services, please feel free to visit us at Septic Remediation in Cumberland, RI, Sewer Blockage/Clogged Drain in Cumberland, RI & Sewer Blockage/Clogged Drain in Milford, Ma

[ascentgateacademy02-blog]

Video Lectures For Gate Mechanical Engineering

The Graduate Aptitude Test in Engineering, GATE, is a premier examination for securing admission into higher education programmers, commonly referred to as Masters, at technical and research institutions. The GATE is organized by the consortium of the elite IITs and IIScs. It is tipped as the pioneering instrument in advancing technical education at master's level in India. Over 400 institutes including IITs ,IISc and NITs require GATE score for admission to M.Tech, M.E. and M.S. programmes. The purpose of GATE is not just to conduct test for seeking admissions but also to identify the potential engineers in various disciplines and assist them in choosing their areas of research to pursue. The IITs and IIScs constantly innovate and introduce new systems to test the basic knowledge of candidates in various fields

Sample Description The GATE examination consists of a single paper of 3 hours duration which contains 65 questions carrying a maximum of 100 marks. GATE 2016 would contain questions of two different types in various papers: (i) Multiple Choice Questions (MCQ) carrying 1 or 2 marks each in all papers and sections. These questions are objective in nature, and each will have a choice of four answers, out of which the candidate has to mark the correct answer(s). (ii) Numerical Answer Questions of 1 or 2 marks each in all papers and sections. For these questions the answer is a real number, to be entered by the candidate using the virtual keypad. No choices will be shown for this type of questions. The examination for all the papers will be carried out in an ONLINE Computer Based Test (CBT) mode where the candidates will be shown the questions in a random sequence on a computer screen. The candidates are required to either select the answer (for MCQ type) or enter the answer for numerical answer type question using a mouse on a virtual keyboard (keyboard of the computer will be disabled). Candidates will be provided with blank paper sheets for rough work and these have to be returned back after the examination. At the end of the 3-hour window, the computer will automatically close the screen from further actions.

All the papers will contain few questions that test the General Aptitude (Language and Analytical Skills), apart from the core subject of the paper. A candidate appearing in the XE paper has to answer the following 1. Section A – Engineering Mathematics (compulsory) 2. GA – General Aptitude (compulsory) 3. Any two of XE sections B to G The choice of two sections from B to G can be made during the examination after viewing the questions. Only two optional sections can be answered at a time. A candidate wishing to change midway of the examination to another optional section must first choose to deselect one of the previously chosen optional sections (B to G). A candidate appearing in the XL paper has to answer the following Section H – Chemistry (compulsory) GA – General Aptitude (compulsory) Any two of XL sections I to M The choice of two sections from I to M can be made during the examination after viewing the questions. Only two optional sections can be answered by the candidate. A candidate wishing to change midway of the examination to another optional section must first choose to deselect one of the previously chosen optional sections (I to M). The GATE examination consists of a single paper of 3-hour duration that contains 65 questions carrying a maximum of 100 marks. The question paper will consist of both multiple choice questions (MCQ) and numerical answer type questions. Click here for the pattern of question papers. The examination for all the papers will be carried out in an ONLINE Computer Based Test (CBT) mode where the candidates will be shown the questions in a random sequence on a computer screen. The candidates are required to either select the answer (for MCQ type) or enter the answer for numerical answer type question using a mouse on a virtual keyboard (keyboard of the computer will be disabled). Candidates will be provided with blank paper sheets for rough work and these have to be returned back after the examination. At the end of the 3-hour window, the computer will automatically close the screen from further actions.

For more details on our products and services, please feel free to visit us at GATE  classes online, Online classes for GATE Mechanical & video lectures for gate mechanical engineering

[ascentgateacademy02-blog]

Top GATE Coaching Institutes In India

[ascentgateacademy02-blog]

Made Easy Video Lectures For Gate

GATE (ME) Part 1 PenDrive course

Take this course and get:

1.            Study materials:-

(a) Theory booklet containing extensive theory, concepts and short cut tricks of all the topics according to GATE & IES syllabus.

(b) Objective booklet containing more than 700 questions in each subject .Test paper is also provided at the end of each unit. Previous 25 years GATE and previous 15 year IES questions are covered.

2. Video Lectures containing explanation of every topic in PenDrive

3. Video solutions for all classroom objective questions in PenDrive

4. 5 Live classes for doubt clearing

5. 22 Online tests with complete performance analysis.

6. 100% return guarantee

Course Description

Maximize your chances of getting a high score. Master  basic Subjects “Strength of Materials”, “Thermodynamics/RAC”, “Theory of Machines” and “ Engineering Maths”  Subjects for your upcoming Gate Examination! These subjects have almost 50% weight age in GATE exam

This course is ideal for Mechanical engineering students who want to master Basic Subjects  for their forthcoming Gate Examination. This online course covers all the concepts through a series of video lecture with detailed explanations of every topic and live doubt clearing sessions. Through the package being offered we have tried to cover the best study material for reference and test series to help you prepare well. This Gate course is suitable for all those who wants expert guidance for preparation at their home .Enroll Now in this online course and get taught by an experienced instructor for the GATE

Why should you enroll in the course?

• Learn at your own pace. Lectures by highly knowledgeable and experienced technical experts with 7+ years of experience in GATE teaching in PenDrive  which can be viewed number of times till exam and even after it.

• Well prepared study material which covers all theoretical aspects, highlighting the important topics from where questions are frequently asked in GATE, IES and other PSU exams.

• Quick guide with video tutorials, doubt clearing sessions and test series.

• Self-evaluation test provided after each topic to analyze performance.

• Previous year papers for GATE & IES included in the study materials provided.

• Learn from a well-qualified instructor with 8+ years of experience in GATE teaching

GATE (ME) Part 2 PenDrive course

Maximize your chances of getting a high score. Master basic Subjects “Fluid Mechanics”, “Machine Design”, “Production” ,“Heat Transfer”  and “Industrial Management/ Operation Research” Subjects for your upcoming Gate Examination!

This course is ideal for Mechanical engineering students who want to master Basic Subjects for their forthcoming Gate Examination. This online course covers all the concepts through a series of video lecture with detailed explanations of every topic and live doubt clearing sessions. Through the package being offered we have tried to cover the best study material for reference and test series to help you prepare well. This Gate course is suitable for all those who wants expert guidance for preparation at their home .Enroll Now in this online course and get taught by an experienced instructor for the GATE

For more details on our products and services, please feel free to visit us at GATE  classes online, GATE Lectures for Mechanical&made easy video lectures for gate

[ascentgateacademy02-blog]

GATE (ME) Part 1 Pen Drive course

Take this course and get:

1.            Study materials:-

(a) Theory booklet containing extensive theory, concepts and short cut tricks of all the topics according to GATE & IES syllabus.

(b) Objective booklet containing more than 700 questions in each subject .Test paper is also provided at the end of each unit. Previous 25 years GATE and previous 15 year IES questions are covered.

2. Video Lectures containing explanation of every topic in PenDrive

3. Video solutions for all classroom objective questions in PenDrive

4. 5 Live classes for doubt clearing

5. 22 Online tests with complete performance analysis.

6. 100% return guarantee

Course Description

Maximize your chances of getting a high score. Master  basic Subjects “Strength of Materials”, “Thermodynamics/RAC”, “Theory of Machines” and “ Engineering Maths”  Subjects for your upcoming Gate Examination! These subjects have almost 50% weight age in GATE exam

This course is ideal for Mechanical engineering students who want to master Basic Subjects  for their forthcoming Gate Examination. This online course covers all the concepts through a series of video lecture with detailed explanations of every topic and live doubt clearing sessions. Through the package being offered we have tried to cover the best study material for reference and test series to help you prepare well. This Gate course is suitable for all those who wants expert guidance for preparation at their home .Enroll Now in this online course and get taught by an experienced instructor for the GATE

Why should you enroll in the course?

• Learn at your own pace. Lectures by highly knowledgeable and experienced technical experts with 7+ years of experience in GATE teaching in PenDrive  which can be viewed number of times till exam and even after it.

• Well prepared study material which covers all theoretical aspects, highlighting the important topics from where questions are frequently asked in GATE, IES and other PSU exams.

• Quick guide with video tutorials, doubt clearing sessions and test series.

• Self-evaluation test provided after each topic to analyze performance.

• Previous year papers for GATE & IES included in the study materials provided.

• Learn from a well-qualified instructor with 8+ years of experience in GATE teaching

The Graduate Aptitude Test in Engineering, GATE, is a premier examination for securing admission into higher education programmers, commonly referred to as Masters, at technical and research institutions. The GATE is organized by the consortium of the elite IITs and IIScs. It is tipped as the pioneering instrument in advancing technical education at master's level in India. Over 400 institutes including IITs ,IISc and NITs require GATE score for admission to M.Tech, M.E. and M.S. programmes. The purpose of GATE is not just to conduct test for seeking admissions but also to identify the potential engineers in various disciplines and assist them in choosing their areas of research to pursue. The IITs and IIScs constantly innovate and introduce new systems to test the basic knowledge of candidates in various fields

For more details on our products and services, please feel free to visit us at Online Coaching for GATE Mechanical, Top GATE Coaching in India, Top GATE Coaching institutes in India

[ascentgateacademy02-blog]

Best GATE Coaching In Delhi

The Graduate Aptitude Test in Engineering, GATE, is a premier examination for securing admission into higher education programmers, commonly referred to as Masters, at technical and research institutions. The GATE is organized by the consortium of the elite IITs and IIScs. It is tipped as the pioneering instrument in advancing technical education at master's level in India. Over 400 institutes including IITs ,IISc and NITs require GATE score for admission to M.Tech, M.E. and M.S. programmes. The purpose of GATE is not just to conduct test for seeking admissions but also to identify the potential engineers in various disciplines and assist them in choosing their areas of research to pursue. The IITs and IIScs constantly innovate and introduce new systems to test the basic knowledge of candidates in various fields

All the papers will contain few questions that test the General Aptitude (Language and Analytical Skills), apart from the core subject of the paper. A candidate appearing in the XE paper has to answer the following 1. Section A – Engineering Mathematics (compulsory) 2. GA – General Aptitude (compulsory) 3. Any two of XE sections B to G The choice of two sections from B to G can be made during the examination after viewing the questions. Only two optional sections can be answered at a time. A candidate wishing to change midway of the examination to another optional section must first choose to deselect one of the previously chosen optional sections (B to G). A candidate appearing in the XL paper has to answer the following Section H – Chemistry (compulsory) GA – General Aptitude (compulsory) Any two of XL sections I to M The choice of two sections from I to M can be made during the examination after viewing the questions. Only two optional sections can be answered by the candidate. A candidate wishing to change midway of the examination to another optional section must first choose to deselect one of the previously chosen optional sections (I to M). The GATE examination consists of a single paper of 3-hour duration that contains 65 questions carrying a maximum of 100 marks. The question paper will consist of both multiple choice questions (MCQ) and numerical answer type questions. Click here for the pattern of question papers. The examination for all the papers will be carried out in an ONLINE Computer Based Test (CBT) mode where the candidates will be shown the questions in a random sequence on a computer screen. The candidates are required to either select the answer (for MCQ type) or enter the answer for numerical answer type question using a mouse on a virtual keyboard (keyboard of the computer will be disabled). Candidates will be provided with blank paper sheets for rough work and these have to be returned back after the examination. At the end of the 3-hour window, the computer will automatically close the screen from further actions.

For more details on our products and services, please feel free to visit us at

video lectures for gate mechanical engineering, made easy video lectures for gate & Top GATE Coaching institutes in India