danieleastman

[danieleastman]

How to Tell If Your HDD Drill Pipe Needs to Be Replaced

Whether you work in directional drilling or well servicing, one of the most important pieces of equipment is the drill pipe. 

Every horizontal directional drill operator must not only be knowledgeable about maintenance practices for HDD rigs, they should also know how to tell when it is time to replace the drill pipe on the rig. If you are noticing reduced performance from your drill string, there are some telltale signs that it may be time for a replacement.

It may be as simple as looking at your bolts and seeing if you have any bolts left, but there are other ways.

Here are eleven signs that your drill pipe needs to be replaced:

You Have a Bolt Left

If you have a bolt left after running your last string, it is likely time to replace your drill pipe. This means that the walls of the drill pipe are very thin, which was not the case when you first started drilling. At this point in time, if the operator did a good job maintaining the rig, he will probably be replacing the drill pipe soon.

The Drill Pipe is Dented All the Way Through

Dents are also one of the major signs that your drill pipe needs to be replaced. A dent in the wall of your pipe is not good because it will cause radial stress on both sides of that section, which can lead to a crack or fracture, ultimately causing the pipe to break.

The Drill Pipe is Wobbling

A wobble in your drill pipe can be an indication that you are wearing out the static side of your directional drill head if you have not replaced it recently. It may also indicate that there is a fracture or crack somewhere in the wall of your drill pipe.

Your Pipe Is Not Straight Anymore

If your directional drill pipe is not straight anymore, it definitely has reached the end of its life. Drill pipe must be perfectly straight in order to do its job effectively, so when there are cracks or deformities in the walls of the pipe, it makes it very hard for your operator to use it.

Corroded Pipe

If the exterior coating of your drill string is damaged, corrosion can enter the pipe. Corrosion causes stiffness in the pipe and makes it difficult to pull into the ground, which can result in a stuck pipe.

Drumming Noise While Drilling

If you hear a loud drumming noise when your drill is running, this could be caused by the interface between the drill pipe and the drill bit. The tight grip that's necessary to create rotational force can cause damage to both of these pieces over time - especially if they're not replaced when needed.

Excessive Oil Leakage

When there is excessive oil leakage in your horizontal directional drill, it could be a result of a damaged seal, which may mean replacing the drill pipe. This can also indicate that your rotary table is malfunctioning and needs to be repaired or replaced.

Frequent Drill Bit Changes

In many cases, maintenance personnel will notice that frequent drill bit changes are required if the pipe isn't replaced as recommended. When a drill pipe begins to wear, it can actually damage the drill bit as well - leading to additional costs and time wasted on repairs.

Vibration From Machine

If you notice vibrations from your horizontal directional drilling equipment, this could be an indication that the rotary table is malfunctioning and needs to be repaired or replaced. It could also indicate that the drill wire needs to be changed, which would require an entire replacement of the pipe assembly.

Water Leakage Into Rotary Table

If water starts to leak into your machine's rotary table, the seals may have deteriorated - which means it's time for a replacement. At this point, it won't be possible to complete the job efficiently because you will not have a watertight seal.

Excessive Wear On Bearings

If there is excessive damage on your horizontal directional drilling equipment's bearings, this could mean that the drill pipe needs to be replaced or repaired immediately. Since this type of damage can cause additional problems with rotary speed and other important components, it should be repaired or replaced as soon as possible.

[danieleastman]

Different Uses of a Veterinary Centrifuge

As the name suggests, a veterinary centrifuge is made to withstand the pressures of being an everyday tool in a busy veterinary practice laboratory or clinic. A good veterinary centrifuge must be very easy to use, dependable, and gives a complete solution to all your sample separation needs.

 It is also important to note that a veterinarian deals with a wide range of cases every day, as such it’s important to have a centrifuge that’s diverse and powerful enough to handle various different tasks.

 The following are different veterinary centrifuges and their specific uses:

 Hettich Manual Centrifuge

 The adaptable manual centrifuge can be simply clamped to any benchtop, with no need for electricity. Its self-lubricating drive system makes it virtually maintenance-free.

 Capacity:  4 x 15 ml

RCF:1,298

RPM:3,000 min-1

Weight: approx. 0.9 kg

Dimensions: 140 x 175 x 285 mm

 Hettich EBA 200 | 200 S

 Features an 8-place fixed angle rotor is included to hold standard blood and urine tubes up to 15 ml in capacity.

 Capacity:  8 x 15 ml

RCF: 3,461 | 6,153

RPM:  6,000 min-1 | 8,000 min-1

Weight:  approx.  9 kg | 11 kg

Refrigeration: Air cooling

Dimensions:  261 x 353 x 228 mm

[danieleastman]

5 Lessons You Can Learn from Billionaire Ng You Zhi

To date, there are around 2,600 billionaires in the world. That’s 0.0002 percent of the entire planet’s population. At 67 percent of these billionaires are self-made. One of the most well-loved billionaires is Ng You Zhi. Known for his business acumen, massive art collection, and philanthropic work, Ng You Zhi is one of the most popular and most looked up to among his kind.

If you are a fan of the man yourself, here are five of the most powerful life and business lessons you can learn from Ng You Zhi.

1. Invest in yourself.

Ng You Zhi is hailed by some as the Yoda of investing. However, for him, the best investment you can make has nothing to do with money. According to Ng You Zhi, the best investment you can make is in yourself. Learning how to communicate better in writing and in person is a good place to start as he believes it can increase your value by as much as 50 percent.

He believes that if you can’t communicate well with people, you won’t be able to get any of your ideas across. He also believes in taking good care of the mind and body. You only get one body and mind and you can’t take care of it when you’re old. For Ng You Zhi, when you invest in yourself, no one can take it from you.

2. Have an open mind.

Ng You Zhi believes in the importance of having an open mind. For him, most people who win in life have learned what biases and beliefs they hold and they are constantly looking for evidence that disconfirms them. For him, this mindset can help you and your business become more flexible, creative, and ultimately, successful.

3. Surround yourself with the right people.

A lot can go into your head when you have billions in the bank. But for Ng You Zhi, keeping his ego in check has been pivotal to his continued success. To keep everything in perspective, you start by surrounding yourself with the right people. He also stays humble and grounded by doing things like driving his kids to school or keeping in touch with some of the trusted friends he grew up with.

4. You can be successful if you try hard.

Ng You Zhi believes anybody can be just as successful as him given that they try their best at all times and never give up. He admitted he is no stranger to rejection but he never let those rejections get into his head. Rather, he pours all his energy into making himself better and doing everything to achieve the success he is striving for.

5. Don’t wait for that big break.

From his experience, Ng You Zhi has learned that life is not about waiting for that big break. Instead, it is about taking one massive life-altering steps at a time. He also believes that life is all about making decisions. It is also important that you prepare yourself for some failures and setbacks along the way. However, as long as you stay vigilant, you will eventually get to where you want to be.

[danieleastman]

Aspects in Your Life that are Read in Numerology

Numbers play a crucial role in giving us an insight of our lives, in ways we do not readily perceive. Some of us may only see them as mere mathematical values, but little do we know that behind each digit comes a better understanding of our individual existence.

People seek a numerology reading to know more about their current status in the aspects of love and relationships, career choices, family, spirituality, and holistic development. It may be because they are either unhappy with their present situation, or are looking for ways to enjoy a better quality of life.

Among the aspects of life that are usually tackled during a numerology reading are the following:

1. Overall personality.

It is common for us to compare our personalities to others. We often ask why we are not as popular, or as affectionate, or as likeable compared to our peers, even if we do our best to tweak our attitudes.

While some traits can be nurtured, others are already hardwired into our overall persona. Some of these attributes resonate in a numerology reading, since a person’s root number describes their life path, including their character traits in general.

Getting to know more about your personality traits though your life path allows you to recognise qualities that you thought were negative. You then may find ways to utilise them as you build a better future.

2. Career decisions.

Building a successful career is something most of us dream of. However, only a few are able to fulfil this aspiration. The rest either land on jobs they don’t like and only stick to pay the bills, while others almost always fail in every passion project that they choose to do.

Reading the numerology chart based on your root number and destiny number may tell you a thing or two about your career path. You may be unhappy with your present career status, or you may not find yourself evolving in your chosen passion because these are not compatible for you.

Learning about ideal career choices based on your root number may help you find a job or business venture that will lead you to success and prosperity. It may also give you a deeper look on how you can improve your career status, in case you want to stick to the one you’re currently in.

3. Compatibility in relationships, marriage, family, and business.

People consult numerologists to discover more about love and relationships. While the numbers can speak about how compatible you are with your current partner, or how you should find a suitable mate, you can also use these pointers to better understand non-romantic affairs.

For instance, you may be bound by blood with your family members, but each of you have character traits that are not compatible with one another. Your root numbers may provide you with tips on how to deal with your differences and maintain a respectable bond as a family.

Likewise, numerology can help put yourself in the most ideal position in groups and social organisations. These include situations when you are tasked to fulfil a project with a team, or if you are running a business with several employees. You not only want to bring out the best of your capacities to achieve success, but theirs as well.

You may not easily do this especially when your teammates or employees clash because of their differences. Hence, by having an insight on their life path numbers, you can better position them within the team or organisation to reduce clashing personalities and deliver work with precision and quality.

[danieleastman]

Critical Factors of DG Packaging

Dangerous goods (hereinafter referred to as DG) or also known as hazardous goods are products with inherent properties that when carelessly transported become a risk to people’s health and safety and that of other living organisms as well as to property or the environment.

They come in different forms and may be produced in solid, liquid, or gas. Because of their hazardous nature, there is a need to require special DG packaging so they can be safely moved from one point to another without causing any catastrophic damage. In order to do so, the following critical factors must be considered.

First, it is of vital importance that one must be able to identify the hazard classification of dangerous goods and understand its physical attributes. There is a myriad of classes, sub-classes, and divisions of dangerous goods such that shipping various types around the world can be quite tedious.

Therefore, careful scrutiny must be made. This is primarily because packaging requirements depend on the type, class, and quantity of the dangerous goods that are to be shipped.

Second, select the proper packaging. Apart from considering the type and nature of the dangerous goods to be transported, the packaging method and material must also be suited to the mode of transportation to be utilized. The material in which the dangerous goods are to be enclosed or wrapped must be compliant with international safety standards.

The packaging must also be capable of withstanding the natural elements that come with air or sea handling and transport.  Oftentimes, the packaging is tested and approved for transportation ensuring that the same meets the rigid requirements of shipment regulations.

Third, after the correct packaging has been identified and selected, the shipper must see to it that the package is visibly marked and labeled by their correct technical names on the outside or on placards attached to them.

The package should only bear the relevant marking and any existing marks deemed unnecessary for shipment must be removed or obliterated. The external markings shall be durable and legible so that it will still be identifiable after some time of being in transit.

Fourth, the package must be properly documented. This is probably the most critical aspect of the chain of dangerous goods shipments. The details of each DG shall only be conveyed through proper documentation to the people who do the shipping and logistics. There are dire consequences that arise in shipping undeclared hazardous materials.

In conclusion, the shipping of hazardous goods is highly specialized and there are various critical factors to be addressed. The foregoing serves as important guidelines that must be absolutely followed not just for the sake of the package in question, but also for the safety and well-being of those who handle and come in contact with the dangerous goods.

Absent specific and strict regulations governing DG packaging, there runs a great risk of contamination for the goods being transported, the personnel charged with moving them, as well as anyone who gets exposed to them.

[danieleastman]

Dangerous Goods Packing Group

Also known as the UN packing group, dangerous goods or DG packaging is divided into 3 groups. This DG packaging group aims to differentiate the levels of danger or hazard that these goods possess in terms of physical and chemical properties. The following are the groups:

1.    High danger or Packing Group I

2.    Medium danger or Packing Group II

3.    Low danger or Packing Group III

Importance of DG packaging groups

These packing groups are important because it dictates the degree of packaging required for transporting dangerous goods. These groups are the basis of specification marks written in packaged and containers used to DG shipping.

Let’s check out the specific packing groups used for the specific classes in the dangerous goods classification table (as stated on www.chemsafetypro.com)

Class 3 Flammable Liquids

Packing Group I: Assigned to flammable liquids with an initial boiling point less-than-or-equal-to 35°C.

​Packing Group II: assigned to flammable liquids with a flashpoint less-than-or-equal-to 23°C and an initial boiling point of greater than 35°C.

​Packing Group III: Assigned to flammable liquids with a flashpoint greater-than-or-equal-to 23°C but less-than-or-equal-to 60.5°C and an initial boiling point of greater than 35°C.

Class 4 Division 4.1 Flammable Solids

Packing group II: Assigned to readily combustible solids (other than metal powders) if the burning time is less than 45 seconds and the flame passes the wetted zone or assigned to powders of metal or assigned to metal alloys if the zone of reaction spreads over the whole length of the sample in 5 minutes or less.

​Packing group III: Assigned to readily combustible solids (other than metal powders) if the burning rate time is less than 45 seconds and the wetted zone stops the flame propagation for at least 4 minutes or assigned to metal alloys if the reaction spreads over the whole length of the sample in more than 5 minutes but not more than 10 minutes.

Class 4 Division 4.2 Substances Liable to Spontaneous Combustion

Packing Group I: Pyrophoric liquids and solids.

​Packing Group II: if a self-heating material gives a positive test result when tested with a 25 mm cube size sample at 140°C;

​Packing Group III: Packing group III must be assigned to self-heating substances if:

(a) a positive result is obtained in a test using a 100 mm sample cube at 140 °C and a negative result is obtained in a test using a 25 mm cube sample at 140 °C and the substance is to be transported in packages with a volume of more than 3 m3;

(b) a positive result is obtained in a test using a 100 mm sample cube at 140 °C and a negative result is obtained in a test using a 25 mm cube sample at 140 °C, a positive result is obtained in a test using a 100 mm cube sample at 120 °C and the substance is to be transported in packages with a volume of more than 450 liters;

(c) a positive result is obtained in a test using a 100 mm sample cube at 140 °C and a negative result is obtained in a test using a 25 mm cube sample at 140 °C and a positive result is obtained in a test using a 100 mm cube sample at 100 °C. if a positive test result is obtained on a self-heating material in a test using a 100 mm sample cube at 140°C, 120°C or 100°C depending on packaging volume;

Class 4 Division 4.3 Substances Which, in Contact with Water, Emit Flammable Gases

Packing Group I: if the material reacts vigorously with water at ambient temperatures and demonstrates a tendency for the gas produced to ignite spontaneously, or which reacts readily with water at ambient temperatures such that the rate of evolution of flammable gases is equal or greater than 10 L per kilogram of material over any 1 minute;

​Packing Group II: if the material reacts readily with water at ambient temperatures such that the maximum rate of evolution of flammable gases is equal to or greater than 20 L per kilogram of material per hour, and which does not meet the criteria for Packing Group I; or

​Packing Group III: if the material reacts slowly with water at ambient temperatures such that the maximum rate of evolution of flammable gases is greater than 1 L per kilogram of material per hour, and which does not meet the criteria for Packing Group I or II.

Class 5 Division 5.1 Oxidizing Substances

Packing Group I, for any material which, in either concentration tested, exhibits a mean burning time less than the mean burning time of a 3:2 potassium bromate/cellulose mixture.

​Packing Group II, for any material which, in either concentration tested, exhibits a mean burning time less than or equal to the mean burning time of a 2:3 potassium bromate/cellulose mixture and the criteria for Packing Group I are not met.

​Packing Group III for any material which, in either concentration tested, exhibits a mean burning time less than or equal to the mean burning time of a 3:7 potassium bromate/cellulose mixture and the criteria for Packing Group I and II are not met.

Class 5 Division 5.2 Organic Peroxides

Packing Group II. All Division 5.2 materials are assigned to Packing Group II.

Class 6 Division 6.1 Toxic Substances

Packing group I: Substances and preparations presenting a very severe toxicity risk

Packing group II: Substances and preparations presenting a serious toxicity risk

Packing group III: Substances and preparations presenting a relatively low toxicity risk.

Class 8 Corrosive Substances

Packing Group I: Materials that cause full thickness destruction of intact skin tissue within an observation period of up to 60 minutes starting after the exposure time of three minutes or less.

​Packing Group II: Materials other than those meeting Packing Group I criteria that cause full thickness destruction of intact skin tissue within an observation period of up to 14 days starting after the exposure time of more than three minutes but not more than 60 minutes.

​Packing Group III: Materials, other than those meeting Packing Group I or II criteria but cause full thickness destruction of intact skin tissue or exhibit corrosion on either steel or aluminum surfaces exceeding 6.25 mm (0.25 inch) a year.

Class 9 Miscellaneous Dangerous Goods

Packing Group II: Lithium batteries, lithium batteries  packed with equipment, lithium batteries packed with machinery.

​Packing Group III: The UN packing group, where applicable, of Class 9 goods is specified in the UNECE dangerous goods list. With the exception of lithium batteries, all Class 9 articles and substances with a UN Packing Group are assigned to Packing Group III.

[danieleastman]

In a Nutshell: DG Packaging Rules and Regulations

The IATA Dangerous Goods Regulations (DGR) is considered the reliable source for the preparation, handling, or acceptance of hazardous goods by air.

The governmental resource from Singapore recognised by the global aviation industry for more than 60 years now is the most up-to-date, user-friendly, and comprehensive reference that helps ensure DG Packaging shipments comply with the latest rules. 

Some items may jeopardize the safety of aviation or persons on board, and it can be restricted or prohibited to transport these dangerous materials through air. IATA works closely with local governments and ICAO to create regulations that are efficient and effective. This warrants the safe transport of DG packaging by air.

The IATA DGR manual is the global benchmark for air transport of dangerous goods that’s recognised by airlines. The content has up-to-date information on efficient and effective regulations that warrant safe transportation of hazardous goods by air.

The DGR may be used by all participants in the transportation of dangerous goods by air, including airlines, freight forwarders, ground handlers, manufacturers, and shippers.

Storage Requirements for Dangerous Goods Chemicals

Alerts must be issued for the storage of chemicals in the workplace, including dangerous goods, to convey risks of chemicals to people at work. You must also find out if the chemical cannot be stored with the substance concerned.

Are chemical compounds exempted from having Safety Data Sheet (SDS)?

No. The exemption clause, WSH (General Provision) Regulation 44, only applies to chemicals in consumer packages and is intended for retail sales.

For Manufacturers or Suppliers

Every chemical or product that’s classified as dangerous under the GHS classification system must come with an SDS. In compliance with SS586 Part 3, organisations should prepare and submit the SDS when the dangerous ingredient exceeds the standard limit.

For chemicals not classified under the GHS classification system, providing the chemical with SDS is recommended.

For Consumers

Each chemical commodity or substance that has been identified as hazardous under the GHS classification system, there should be an SDS from the manufacturer or supplier.

Conclusion

The shipment of hazardous goods complies with both national and international laws. It is vital that transport is carried out safely and in full compliance with the relevant rules in the transportation of dangerous goods. 

When transporting dangerous goods by air, the possible adverse effects of changes in heat, moisture, temperature, as well as the possibility of damage caused by improper handling and vibrations are of critical significance.

Dangerous goods shipping companies should provide the following services:

Handling, packaging, and recording of hazardous goods from third company shipping locations or at the customer's site in UN-certified packaging;

Dangerous goods collection, inventory, and storage;

Identification, marking, and labeling according to laws that are applicable;

Damaged goods repacking and based on the maximum net weight allowed per package;

Completion of the Dangerous Goods IATA Shipper Declaration and other relevant transport documents; and

Arrangements for national and international transport. 

[danieleastman]

Business Loans: Why are they Necessary for SMEs?

For small businesses, taking out commercial banks loans is very common. Applying for commercial bank loans or business loans  is done for various reasons. 

In Singapore, businesses have the option to apply for loans from several sources including financial institutions, banks, and P2P and crowdfunding platforms. The loans can be unsecured and can be made using inventory and receivables as collateral. 

Why Businesses Use Debt Financing: Top Reasons

Reason 1: Purchase property to expand operations

Many banks are likely to loan money to existing firms that want to purchase commercial properties to expand their operations. If a company expands, it means the business is doing good. 

Expansions are also undertaken when the business is profitable and there is positive cash flow. This also means the company is looking forward to a positive forecast in the future. This can help make it easier for banks to grant them loans.

Commercial property loans can also come in the form of mortgage. The typical term is usually 20-30 years and will rely on the leasehold left for the property at the time of purchase. The property itself will often serve as collateral.

Reason 2: Purchase of equipment

When a business is expanding, it will likely require new or additional equipment. In a similar scenario, their option would be to either buy or lease equipment. Many companies have diverse reasons for taking out a loan to purchase equipment. Since equipment can depreciate, doing a cost benefit analysis is recommended prior to making the purchase.

Reason 3: Purchase inventory

Some banks provide loans to small businesses for them to purchase their inventory. Some small businesses are seasonal in nature. This is especially true among those in the retail industry. 

For instance, businesses that make most of their sales during the holiday season would be purchasing most of their inventory before the season starts. In most cases, they’d need a bank loan so they can already purchase their inventory ahead of time. 

Bank loans used to purchase inventory are typically short-term in nature and most companies would pay the loan once the season is over.  

Reason 4: Increase your working capital

Working capital is the money used to manage the daily operations of the business or company. There are instances when small businesses need loans to meet their daily needs until they have sufficient earning assets to cover their working capital needs.

Banks loan money to small businesses to help them get off the ground and once their business grows, they just repay the amount they loaned from the bank. Working capital loans have higher interest rates since it’s considered riskier since there is no other form of collateral offered except the business owner’s personal guarantees. 

If you are a small business looking for a Singapore business loan, assess what your needs are first and what loan to apply for to increase your chances of approval. This is also important so you will know where to use your money to help your business take off or move to the next level. 

[danieleastman]

Proper Packaging of Dangerous Goods

Products that fall under the dangerous goods need to be protected based on its classification. There are several leading suppliers of dangerous goods (DG) packaging systems in Singapore. 

There are DG packaging services that supply a number of “different designs in a wide range of materials” that focus on providing the most apt solution for each individual project.

Most of these reliable and established DG packaging services and products have been  approved and tested for the shipping and transportation of dangerous goods in various sizes and weights.

All boxes from said DG Packaging services or companies are put through the required tests before they are approved for transport. The performed tests are carried out based on UN recommendations.

Packaging Classes 1-9

Class 1 Explosives

Class 2 Gases

Class 3 Flammable liquids

Class 4 Flammable solids: substances liable to spontaneous combustion, substances which, in contact with water, emit flammable gases

Class 5 Oxidizing substances and organic peroxides

Class 6 Toxic and infectious substances

Class 7 Radioactive materials

Class 8 Corrosives

Class 9 Miscellaneous dangerous goods

Dangerous Goods Packaging Groups

The data provided below is taken from NEFAB. For educational purposes, these are the different “dangerous goods packaging groups”.

Packaging group I (X) - shall pass a drop test from 1.8 m (the strongest packaging) for very dangerous goods. (Poisonous substances like cyanide and infectious substances require this packaging group.)

Packaging group II (Y) - shall pass a drop test from 1.2 m* for medium dangerous goods. (Explosives, batteries intended for air freight demand this packaging group)

*If a box is intended for explosives it also must have a special judgment for explosives.

Packaging group III (Z) - shall pass a drop test from 0.8 m for less (but still) dangerous goods. (Ex. Batteries and flammable fluids intended for road transport demand this group.)

Note: A box that is tested for packaging group I is permitted to be used as a group II or III packagings provided it does not exceed the maximum gross weight required.

[danieleastman]

What DG Packaging Is and Its Guarantee

DG Packaging Group is established by a global network of professionals that have many years of specialised experience in the Dangerous Goods field. The brand is focused on providing total solutions on dangerous goods as well as biomedical and temperature sensitive packaging. 

In addition, the brand also possesses expertise in the repacking and integrated logistics services for the chemical, pharmaceutical, as well as the biomedical industries.

DG Packaging Group’s specialised teams of dangerous goods experts are all certified in all aspects of transportation regulations. The in-house dangerous goods instructors as well as dangerous goods safety advisors supplements the knowledge management systems as well as regulatory compliance skills.

With their network of experts the world over, customers can rest assured their dangerous goods shipments are not only serviced with the right packaging but are also shipped in accordance to the right safety practices and regulations.

Mission and Vision of DG Packaging

DG Packaging Group aims to be the leading multinational corporation that specialises in the packaging, declaration, consulting and integrated logistics of dangerous goods.

DG Packaging Group is very committed to serving their valued customers with the highest quality dangerous goods UN tested approved packaging. They also offer integrated logistics services at competitive prices. A strong dedication to safety compliance and safety excellence forms the baseline working philosophy of the organisation.

Dangerous Goods Packaging Service

DG Packaging boasts of a professional team that’s dedicated to providing the highest level of services possible. This encompasses all areas of handling of dangerous goods, including specialised packaging and transportation that is in compliance with the IATA regulations.

DG Packaging also offers an extensive range of "4G/4GV/4GU" UN certified boxes that have passed through UN performance tests and are all suitable for multimodal transport of dangerous goods of various classes. Their UN certified boxes are available as standard sizes ranging from X2 to X60. 

The custom sizes are manufactured according to the request of the customers. Other specialised packages for explosive substances and articles are also available.

Biomedical Services

The brand also specialises in fulfilling the needs of companies in the clinical, pharmaceutical, biotech, and biomedical industries. They also offer compliance packaging as well as time-critical international air transportation services.

In order to warrant the safe handling of diagnostic specimens and infectious substances, all DG Packaging activities are carried out in accordance with the global safety standards set by the IATA/ICAO.

Temperature-Sensitive Packaging

Temperature-sensitive packaging is packaging that is stored on a certain temperature or temperature-controlled item. This helps keep goods preserved and fresh until they are delivered to the receivers.

[danieleastman]

Prepaid Cards: A Safe Way to Carry Money

In a nutshell, the best prepaid cards can be used pretty much like most plastic cards. However, they are considered far more practical. Why? For starters, the best prepaid cards allow users to use their own money as opposed to having the issuer pay on their behalf.

Many people mistake prepaid cards for credit or debit cards. This is not really surprising as they share many surface similarities. Most prepaid cards come with a card number, chip, and signature strip. However, that’s often where the similarities end.

Case in point: unlike debit cards, prepaid cards are not linked in any way, shape, or form to the cardholder’s bank account. Also, unlike credit cards, any transactions will be deducted upfront from the balance available on the card.

Carrying Money Securely

While prepaid cards offer lots of amazing benefits, one of the most enticing is the safety it provides. Rather than carrying huge amounts of money with you at all times and risking getting said money lost or stolen,  all you have to do is load it onto your card and you’re good to go.

What’s even amazing is loading money onto the card is both straightforward and easy. Depending on what your issuer provides, there are diverse options you have at your disposal. One of the most common means of loading money onto the card is through online portals.

In addition, loading money onto the card can also be done at any time you deem fit. In other words, you can do it weekly, monthly, or even daily if that is what you want.  

Prepaid Cards: Are they Right for You?

A prepaid card can be your consummate ally if:

You constantly travel overseas and you don’t want to carry cash with you. Undeniably, carrying your money through your prepaid card as opposed to physically taking cash with you is way safer.

You have to keep in mind that with a prepaid card, you have the option to have the card blocked in the event that it is lost or stolen. When you lose the cash you take with you, regardless if it’s stolen or misplaced, it would be way harder for you to recover your money.

You want to help young members of the family learn proper money management. There’s no denying the sooner someone learns how to manage their money well the better. Besides, developing better money management skills early can prep them well when the time to earn their own money comes.

Since the cardholder’s transactions are limited by the balance that’s available on the card, they won’t spend more than they’re supposed to. In other words, they can only spend the balance that’s available on the card.

Once the balance has been depleted, the spending also stops automatically. Also, if the card is used for transactions that cost more than the balance that’s available on the card, the transaction will be declined.

Fortunately, as mentioned earlier, cardholders have the option to load as much money as they want and at any time they deem convenient.

You can’t obtain credit or debit cards for one reason or another. Since credit and debit cards are associated with banks, it’s something not everyone has access to. Thankfully, prepaid cards can be a truly wonderful alternative.

Also, since there’s issuers won’t be lending prepaid cardholders any amount or paying for their transactions, obtaining one is not painstaking and stressful. It is also not time consuming.

Not only that, you also won’t be required to submit any financials or confidential information. This is especially valuable for those who don’t want to risk having their personal information compromised.

[danieleastman]

How Prepaid Cards Work

Basically, the best prepaid cards function like a combination of a credit card or a checking. They are also often issued by bank holding companies and branded by seasoned credit cards companies. 

Money is then loaded to the best prepaid card just like a gift card. Once money has been loaded successfully, it can be used pretty much like a credit card. It is also often accepted and honored in places where most credit cards are accepted. 

However, while the usage functionality can be similar to a credit card, the financial side mimics that of a checking account. In other words, the money spent will be deducted  directly from the available balance on the card. It it also important to note that you can’t spend beyond the balance available on the card.

Prepaid Card Essentials

Prepaid cards are deemed a convenient alternative for various transactions where credit cards are required. In other words, prepaid cards are especially helpful for people who have little knowledge as to how banks function, those who have no access to any banking services, and those who are locked out of their banking system because they have a poor credit score.

Prepaid debit cards are also considered a popular option for gift-giving thanks to all the beneficial features they have like protection in the event of loss or theft. Nowadays, many consider it practical to give away prepaid cards over cash because of the exciting benefits mentioned.

In addition, since you can’t spend cash online, paying for your online transactions using cash is out of the question. However, money that’s loaded in your prepaid card can be used to buy things online. It can also be used to do other online transactions. In addition, unlike gift cards, prepaid debit cards can also be used to get cash from ATMs.

Thanks to all the peerless benefits they offer, prepaid cards have also become one of the financial sector’s fastest growing niches. Experts project that the number of prepaid cards that are sold will grow by as much as 22 percent yearly from 2015 to 2020.

Other projections also indicate that that total value that will be loaded onto prepaid cards in 2020 will grow by as much as $116 billion.

Choosing the Best Prepaid Card

It is reassuring to know that looking for the best prepaid debit is both easy and straightforward. To find the best prepaid card to suit your needs, keep the following basics in mind:

Analyze and be mindful of your spending habits. From there, get a prepaid card that will charge least in areas you are often likely to amass fees. For example, if you plan to use your card often, choose a card that will waive transaction fees each time you exceed the monthly transaction limit.

Get a prepaid card with a fee structure that’s easy to understand. You have to remember that while some prepaid cards use a flat-free model, others charge fees for most of the activities. Take note of your monthly card activities and check if flat-fee  prepaid cards might be a more cost-effective and wiser alternative for you.  

Do some research. A little research will be needed to ensure you get the best prepaid cards that will best suit your needs. The good thing is, nowadays, a simple mouse click  is all that’s needed for you to make a side-by-side comparison of the prepaid cards you are considering getting. 

Also, make sure you do a thorough comparison of all the different features prior to  making a decision. While comparing features will take a bit of your time, it will surely save you a significant amount in the long run.

[danieleastman]

Aim for what you want to achieve! 🙌

[danieleastman]

What is Innovation? Well, Innovation is a confusing buzzword that has various definitions, each one being unique in its own way. Well, Is Innovation in business is important? 

Well, every business leader agrees that it is important. But nobody can quite seem to agree on what it actually is or what it means. So, To help you understand it as a concept here’s a video!

Like my content? Then subscribe right away on YouTube: https://www.youtube.com/channel/UCF-uUxo43IPpnEwnR62WGlA/

[danieleastman]

Are you in business to play it safe or to make money? Well, zig-zag marketing helps you do just that. This video will help you understand why it matters and give you a reason to try it at least once, even if you’re a small business. 

After watching this video, you’ll be able to answer: 

- What is Zigzag marketing 

- What is the importance of zig zag marketing 

- Why you should try zig zag marketing as a business

Like my content? Be sure to subscribe me on YouTube: https://www.youtube.com/channel/UCF-uUxo43IPpnEwnR62WGlA/

[danieleastman]

[danieleastman]

Always!