evol0v3-blog

[evol0v3-blog]

How To Deal with a Gas Leak in Bridge City

A gas leak inside the home is not something to be taken lightly. Sadly, thousands of homes experience this every year. It is expected to happen after a disaster, such as an earthquake. Then again, it can happen any time.  Treat this post as your primer on how to deal with a gas leak in Bridge City.

When You Suspect a Gas Leak

The first thing that you should do is gather your family and evacuate the house as soon as possible. Gas leaks transform your home into a time bomb waiting to explode. To avoid passing out from gas inhalation, wrap a wet towel over your face.

After getting everyone out of the house, call a licensed Bridge City plumber to find the location of the leak.  Make sure that you are in a safe distance because even mobile phone signal waves can cause a spark. Better if you use a phone from a neighbor’s house.

If you know how to shut off the main valve of the gas line, do it to stop the supply of gas leaking inside your house while waiting for your gas leak repair plumber to come.

Next thing to do is to open all windows and doors to let the gas out. A word of caution, though, be wary of people trespassing your property. Stay nearby because you’re exposing your home to strangers with the windows and doors as an easy entry point.

It is not wise to shut off or even switch on your home appliances. Do not unplug electrical devices. Let them be. Never ever light a matchstick or a lighter. These could cause a spark that will lead to an explosive fire.

Let Plumbers 911 Help Fix Your Gas Leak in Bridge City

Plumbers 911 can help you find a licensed Bridge City plumber that can help fix your home’s gas leak problem. Save this number for emergency gas repair services: (409) 237-3137.

Meanwhile, watch this video to know more about Plumbers 911 Texas:

[evol0v3-blog]

Things Your Coconut Creek Plumbing Technician Doesn’t Tell You

Homeowners normally experience plumbing problems. It is actually expected. Thankfully, most common plumbing issues are simple and can be fixed with just a few plumbing tools and limited plumbing knowledge. Moreover, it helps to know this plumbing information:

Septic tank pumping should be done every five years to ensure that it is in proper working condition. Five years is enough to have sediments building up in your septic tank. Better pay the price of septic tank pumping than spending money on repairing the whole septic tank.

Always have a strainer over your kitchen sink’s drain. This will prevent large pieces of food waste and whatnots in passing through your sink’s drain. A strainer should also be placed on your bathtub’s drain to prevent hair from clogging the bathtub’s pipes.

Do not pour used oil down the drain. Oils solidify once cooled and, if this happens, you will have a very serious plumbing problem. Oils also affect the sharpness of the blades of your kitchen sink’s garbage disposal.

Avoid using those toilet tablet or disc odor removers. Yes, they can eliminate bad odors in your toilet. But since these are made of chemicals, they can also affect your toilet’s rubber fixtures over time.

Know that these are only simple plumbing tips. For major plumbing issues, however, you gotta hire a licensed Coconut Creek plumber. I recommend calling Douglas Orr Plumbing, Inc at 954-522-8282 to schedule a visit right away.

[evol0v3-blog]

Helpful Leak Detection Tips in Independence MO

We all need common knowledge on water leak detection to save on water bills in Independence MO. By doing this, we are not only saving dollars but we are also doing our share to save planet Earth from more water wastage. Having water leakage in your plumbing system can be very costly so I came up with these little tips in managing this kind of issue.

When determining water leak, listen carefully for any hissing sound as this is a clear indication that our pipes have problems.

Water Leak Detection System Installation in Independence MO

You can use two systems to detect water leaks: Passive Leak Detection System and Active Leak Detection System 

Passive Leak Detection System - a battery-operated device capable of sounding an alarm when the moisture system detects something wet.

Active Leak Detection System - a device that sounds when it detects moisture, but it also shuts off the water supply.  

Sometimes, toilet flushes without anyone around. No, there's no ghost in your toilet, but it could be a sign of leaking. To determine a leak in the bowl itself, you can put food color in the water and avoid flushing in the next few hours. If the floor in near the toilet shows signs of colored water, then we can conclude that there is a leak in the area. 

Carefully check hoses, taps, and drip irrigations found in your garden. Check your water bill and if you notice a sudden shoot up in your bill, try checking the concealed piping systems to check for any leakage. 

These are some of the ways to check for any leak in your home. These are small and easy steps but could actually help you in saving resources and money. Once you find that your suspicions are true, call a reliable Independence plumber immediately. 

[evol0v3-blog]

Green Plumbing Tips for your Laurel MT Home

A lot of companies understand that the future of the Earth is placed squarely on the shoulders of society. And that includes plumbing technicians who bring the Green Screen Mark and educate individuals about the advantages of having a green plumbing system, offer homeowners product or services that can enhance energy and water effectiveness. 

Here are some green plumbing tips to help you:

One tip is to set up efficient tankless or solar hot water heater, which can conserve up to 33-51 percent in water and energy usage.

Insulate around available warm water pipes, especially those within 3 feet of your hot water tank. This will assist keep the water in your pipes warm so you won't need to run as much water from the tap waiting for the hot to arrive.

Add low circulation aerators, about $5, to all the faucets in your house. Faucets installed prior to 1994 use an extreme amount of water compared with today's models. An aerator can cut waste by 25 percent.

Check for toilet leaks by including some food coloring (or even cold coffee) to the tank and wait a couple of minutes. If the food coloring shows up in the bowl, the toilet is leaking.

Lower the temperature level on your warm water heating system. Decreasing the temperature level by a few degrees will save you cash on your energy expenses. Professionals suggest setting your hot water heater temperature level no higher than 120 degrees Fahrenheit.

Install a low-flow shower head. Advances in low circulation showerhead innovation imply you most likely will not feel any distinction, however your water use will drop considerably. The most recent models still produce strong water pressure while utilizing much less water.

To help you maintain the plumbing system in your Laurel home, call a trusted Laurel plumber today. This ensures your plumbing system getting the proper care and you not spending on back jobs because of inefficient plumbing job.

[evol0v3-blog]

Fun Facts about Air Conditioners Every Amesbury Homeowner Should Know

Air conditioner offers a whole lot of benefits in our daily lives. Regardless of the job you perform or where you are, we yearn for the comfort an air conditioner brings. This is especially true in areas with severe temperatures or in the summer season.

Yet despite its popularity, we know very little about air conditioners. Here are some facts about air conditioning that not so many people know about:

·         An anonymous millionaire in California was the first one to use air conditioning to cool one of his rooms in 1892. The size of the room? 6 by 9 feet and it required a fabricated partition to conceal the machinery, majority of which were placed in the roof.

·         Ever wondered how the term “air conditioning” came about? A North Carolina textile manufacturer coined this phrase in 1906 because somehow at that time, this piece of technology increased the condition and quality of the cloth his plant was producing. There’s a resistor called thermistor inside a thermostat capable of changing resistance as the temperature changes.

·         The sales of modern air conditioner took off in the 50s, because by 1953 there has been a record of 10 million room air conditioner units sold. In 1998, a solid 35 years later, a total of 6.2 million heat pumps and air conditioners where shipped to both homes and offices as a sign of the growing demand of air conditioning units.

·         This jumpstart in the modern air conditioning opened doors for so many things such as longer life expectancy, advances in the medical technology field, decrease in the cases of contagious diseases, and created a huge leap in employee productivity.

·         60% of US homes rely on gas-fired furnaces for heat.

·         Before the invention of air conditioning, a lot of government offices and business leave during summer vacation because of the extreme heat.

If you need any help in the installation, maintenance, and repair of your HVAC system in Amesbury, call a reliable Amesbury contractor immediately.

[evol0v3-blog]

Tools of the Trade: Selecting a Plumbing Wrench in Bourbonnais IL

A pipe wrench is a simple tool used for tightening and removing pipes in the plumbing fixtures of your Bourbonnais IL home . A pipe wrench differs from other wrenches as it has an adjustable head or jaw with teeth that move up and down. When selecting a plumbing wrench, consider the following factors:

Choose the right tool for the job. Pipe wrenches come in all sizes but the most popular seems to be the 14 inch one. It is long enough to have good leverage but short enough to fit in tight places. The wrench needs to go completely around the pipe and fitting and be able to grasp securely. If the wrench is too wide it will slip and possibly injure the user. If the wrench is too tight it could actually bend the pipe or break the fitting, another unhappy consequence.

Position your body so that you pull on the wrench, not push on it. Pushing could cause injury if your arm slips; if you are forced to push the wrench, use the palm of your hand for better leverage. Don’t use another pipe or cheater bar for leverage. Adding extra torque beyond the original design of the wrench could result in a bent pipe, or a rounded fastener. If you need extra torque use a longer wrench or liquid wrench, a type of oil that loosens the fastenings.

Choose a good quality wrench from a reputable manufacturer with a lifetime guarantee. This guarantee will originally cost more for the tool, but will save big over the length of time you will use this tool. Any problem with the tool, like bending, etc., and a guaranteed replacement will benefit you for years.

Use a pipe wrench for your under the sink repairs, because the teeth in the jaws of the wrench will leave slight press marks on your pipes. You don’t want to mar your fixtures and handles with teeth marks. Also, don’t use a pipe wrench on nuts and bolts because you may damage the fasteners.

Make sure you are using the correct size wrench for your job. The pipe wrench for certified plumbers in Kankakee County, should have a small gap between the pipe and the back of the jaw on the wrench. Allowing the jaw to confine the pipe reduces the leverage of the pipe wrench, so allow a gap of one-half inch between the pipe and the jaw. As you move the wrench forward, the jaws and the back of the wrench close onto the pipe.

[evol0v3-blog]

Plumbing Cost Estimator for Essex MA

Before deciding to contract a plumber for your next plumbing project, whether it is repairing a slab leak, clearing a drain, remodeling a bathroom in Essex MA or any other tasks, consider using a plumbing cost estimator to ensure you will be paying a fair price. Estimators can often be found for free on a plumber’s website, however, you can also purchase plumbing software. There are also home improvement websites that will consider the data of your specific area and give you an appropriate estimate based on the data they have collected from previous plumbing customers in that area.

There are three parts to estimating the cost for a plumbing job; the cost of labor per hours, the cost of materials that will be needed on the job, and the cost of equipment. Good estimating software will be able to break down your estimate into each of these categories.

However, while cost estimating software will be able to give an accurate overview of general prices, these are only based on averages. To get the most accurate price for a repair or project, ask the plumbers in your area. A plumber should be able to break down the costs into these categories as well, and provide a general estimate over the phone, based on the specifics of your plumbing job. Additionally, if you are unsure of what the problem is with your plumbing, then you may not be able to use plumbing estimate software at all. Before panicking, call an Essex MA plumber to receive a price quote.

When seeking a price quote, you should ask for two prices. The first should be the cost of the initial appointment, as there will be a charge just for a plumber to come out to your home. The next price you should ask for is the total cost of the repair, including materials, equipment, and labor. A plumber should be able to break the information down into these three categories. Finally, before choosing a plumber, call around to different companies in your area to receive price quotes for services from them as well. This will ensure you receive the most accurate estimate.

[evol0v3-blog]

Four Easy Steps to Garbage Disposal Repair in Your Miami Home

Okay, so you know that there’s something wrong with your garbage disposer, but just not sure what’s causing it.  No power? Clogged? Something jammed in there? 

Here are a few steps on garbage disposal repair in Miami:

The first thing you need to do is make sure your disposal is plugged in. Some people fail to do this and panic immediately without even checking. Look for the manual of your disposal system. This can help you with the initial troubleshooting of this plumbing appliance. It can show you a diagram to look for the reset button.  It’s usually found at the bottom of the unit.  You can press this button and see if it will solve the problem.

If this doesn’t work, try this next step but you have to bear in mind that you should NEVER put your bare hands in the mechanism. That’s the cardinal rule. Make sure your unit is turned off.  Get a flashlight handy and also grab the hex that came with the disposal.

Remove the drain cover and try to see if you can find the clog by pointing the flashlight in that area.  Then, insert the hex.  This has around six sides which tightens the bolts in your plumbing appliance. Rotate it clockwise and vice versa to remove the jam.

Turn the power back on once the disposal has been unclogged.  Turn on the water to see if it will function correctly.

If these steps do not solve the dilemma, you may have to call in a professional to handle the problem.  A licensed miami plumber may repair your garbage disposal by servicing leaking hoses or fixing the flywheel.  

[evol0v3-blog]

DIY Florida Faucet Repair: A Guide To Homeowners

A lot of things can go wrong when it comes to faucets whether it's broken parts, incessant leaks, or a scalding hot tap. In this handy guide, we'll give you tips to help you troubleshoot and repair a leaky faucet.

Who isn't familiar with the annoying and incessant drip brought by the leaky faucet. Thankfully, this typical irritant has some pretty simple solutions and quick fixes.

If you're looking to getting rid of the noise while waiting for your plumber or at the very least, the next day before you can get it fixed, try tying a string around the faucet and leading the string towards the source of the drip. Secure the string so it leads the drops of water down the string instead of annoying you by dripping on your sink.

Now, for a more permanent fix:

It's highly likely that the source of the leak is an errant washer. Don't you worry. These things are pretty easy to replace.

First, turn off water supply. You wouldn't want water gushing all over your kitchen.

Next, you can begin by disassembling your faucet, starting with the handle knobs. Remove whatever ornamental parts there are using a screwdriver. Under the knob, unscrew the screw that is used to mount the handle to the stem. Remove the rest of the handle.

From there, you can use a wrench to loosen the packing nut and the stem. Remove both.

Take note if any of the parts you removed show signs of damage. If they do, take them to your local hardware store to look for a suitable replacement. If everything seems to be in order, check the O-ring and washer. If these items prove to be the culprit, double check with your handyman to make sure you're getting the right size and type. These things need to be a perfect fit so you have to be as accurate as you possibly can.

After this point, you can begin by replacing the parts in reverse of the order by which you removed them. (Didn't we tell you to take note?) Turn on your water supply again and check to see if you've remedied the problem. If, after these attempts, and your faucet is still leaking, there might be other problems with your plumbing. It's best that you consult a professional so they can address these concerns and more.

Now you know the basics of Florida faucet repair. For professional help, check out Douglas Orr Plumbing. Call them at 305-887-1687 or 954-522-828 OR 1-800-DOUG-ORR. Check out this link on how to install two-handle faucets.

You can also watch this video on tips for your next outdoor shower:

[evol0v3-blog]

Handy Toilet Repair DIY Tips for your Great Falls Home

Having the toilet repaired by yourself can conserve you great deals of money from employing a plumbing. There are common issues associating with toilet repair work like blocking or dripping, and you can really repair it yourself with just a little know-how attitude and ability for pipes. Here are some

useful toilet repair work Do It Yourself techniques

that you can really attempt:

Unclogging the toilet The simplest way to resolve this would be with the use of plunger. Have enough water in the bowl so the rubber suction cup is covered, then move the manage in an up and down movement. You would have to remove the blockage inside. You may be able to determine the blockage nearby from the drain. If the clog can not be moved, attempt hooking it with a hanger and after that pulling it up.

Difficulties with the Toilet Tank Having a toilet tank problem can trigger bothersome and odd noises, and worst of all, a definite waste of water The water generally fails to shut down and continues to flow out of the tank. The float ball could be rubbing versus the side of the tank, which, in this case, you ought to bend the arm a little. This will move the float ball far from the tank side. If everything else fails, just check the tank ball discovered at the flush valve seat and discover the cause. It might be because of chemical residues, or the decay of the float ball itself.

Flushes insufficient water. First, check if the water level in the tank is not too low currently. Just bend up the arm somewhat and this will let more water to enter into the tank. Likewise, there might be a clog stuck down someplace, which may cause an insufficient quantity of water lacking the bowl.

If all else fail, call a local Great Falls plumber right away. By doing so, you will no longer be spending money on extra services, materials, equipment and time.

[evol0v3-blog]

Top Tips to Consider When Remodeling Your Home's Bathroom

Remodeling a bathroom in Miami need not be an overwhelming task. With research and help from the pros, things can go pretty easy. Follow these four essential tips for a stress and error-free remodeling.

Hire an interior designer.

Or better yet, consult with an interior designer. This is one of the most important steps and worthy investment when you want to remodel your home’s bathroom, especially if you are planning to sell your house in the near future. With interior designers, you won’t be having miscalculated risks, wrong decisions, or costly errors. Plus, you will be shown several clever designs they can suggest for your new bathroom.

Update your lighting.

New and bright lights will definitely up your bathroom to new heights. Plan your lighting system before you start fixing the bathroom walls and ceilings just in case you need to install a new cable. Choose lighting fixtures that are rated for bathroom use. And always go for styles that are in-tune with the overall bathroom design.

Call the professionals.

Same with tip number one, hiring professional Miami plumbers will save thousands of dollars on errors and cheap alternatives. This doesn’t discourage you to go cheaper when there is really room for it. But make sure that you are 100% right with your judgment when remodeling your bathroom as DIY mistakes can be a lot more costly than hiring a professional plumber, painter, or technicians.

Choose tiles that are low maintenance, highly resistant.

A bathroom is one of the most-used places in homes and offices. Thus, choosing tiles that are low maintenance will save you time from regularly cleaning and polishing it. Your selected tiles should also be water, scratch, fade, and germ-free. If your bathroom walls and flooring materials are not this durable, you will only be renovating your bathroom anytime soon.  

 �z�9x�

[evol0v3-blog]

Septic Pumping in Your Chicago Home

The ultimate purpose of a septic tank is for waste water treatment, thus its maintenance is necessary every one to three years. To remove the scum build-up and sludge thoroughly, cleaning must be completed in the tank. This preventive maintenance is important to avoid expensive problems in the future.

But do you know that DIY septic pumping is not recommended? This is because the removal of solid and liquid materials could cause an explosion if not properly done. You need the help of a licensed Chicago plumber.

The assigned plumber will start the cleaning through the opening of the manhole. It is a must that the other openings are closed to ensure that it gets thoroughly cleaned. Check if the plumbing has inspected the baffles inside the tank as well. Once the cleaning is done, you should only see a black film on the walls and a small amount of liquid. Both has bacteria that will help start the decomposition once again.

Remember that it’s a no-no to clean your septic tank. Never do it. There are combustible gases present inside the tanks and could cause severe damage to properties and lives. The safest way to acknowledge and address this issue to hire a licensed, highly trained and bonded Chicago plumbing professional to do the cleaning for you.

eed_lo��>.���