howtosetup-this

[howtosetup-this]

How to setup Netgear Router For A Cable Internet Connection With The Smart Wizard- howtosetupthis

Firstly, connect the modem to the internet port of the Netgear router and to your computer in any of the four LAN ports.

Press the router, computer, and boardband cable modem, off and on again. Wait until it finishes booting up.

Open the web browser page and type the router’s IP address http://192.168.01 or http://192.168.1.1 in the address bar and hit Enter.

Now you will be permitted to log into the router.

The default user name is the admin, and the default passwordis is password. The user name and password are case sensitive.

If the default user name and password is not working, try other passwords, or you may need to change the password. Or else you need to perform a factory reset to restore the router settings.

Click the Setup Wizard option. The Setup Wizard screen appears.

Select Yes and click Next option.

The Setup Wizard finds the type of internet connection. If you have a cable internet connection, the setup wizard detects a Dynamic IP address.

Click Next. The router will save the settings.

Don’t try to change the default settings unless your internet service provider gives you specific DNS information that must be configured.

Select Router Status under Maintenance to check if you are connected to the internet.

View the IP address field to see if the correct IP address is entered.

Please Visit Our Website: https://www.howtosetupthis.com/

[howtosetup-this]

How to setup A Netgear DSL Modem Router For Internet Connection With Netgear Genie- howtosetupthis

Connect the DSL port of Netgear to the Netgear DSL router to the phone line through the DSL Microfilter.

Use the Ethernet cable to connect the computer to any of the LAN ports in the Netgear DSL Modem Router.

Connect the Netgear DSL modem router to the wall socket for power supply and wait until it boots up.

Now open the browser, you will immediately be taken to the Netgear genie setup screen. If the Netgear genie page doesn’t show up, access the screen by

entering http://192.168.01 or http://www.routerloginns.net.

Configuring the Internet connection page appears. You will find a prompt asking, Do you want Netgear Genie to help? Click the option Yes. In the bottom of the page you will find the option Next, click on it to continue with next step of how to install Netgear router.

Choose the Country from the list and click Next.

Now the Setup Wizard will detect the type of internet connection.

The DSL connections which need a login to connect to the internet will be detected as PPPoE/ PPPoA.

The Internet service provider will provide your login details like username, password to access their service. Type these details in the respective field and then click Next.

The router will apply the settings. Once completed, you can check whether you are connected to the internet by clicking on the option Take me to the Internet.

If the configuration fails, contact your Internet Service Provider to obtain the correct login credentials and then click Try again to complete the setup process. know more please visit our website:https://www.howtosetupthis.com/

[howtosetup-this]

Howtosetupthis is a public technology company and provides the techinical knowledge about gadgets, servers, internet and etc. howtosetupthis gives the most recent news about innovation, yet in addition gives a top to bottom investigation of the items that are available today. Accordingly, you become a superior buyer as in you are settling on an educated decision. Through item audits, you become more acquainted with an item well.

[howtosetup-this]

How to setup EX7000 As Wireless Range Extender

Firstly, connect your system to the EX7000 via a wired or wireless connection and follow next steps of how to install Netgear router EX7000.

For a wired connection: Use the Ethernet cable to connect your computer to any one of the available Ethernet ports of the EX7000.

To perform a wireless connection, use the Wi-Fi network manager on your wireless computer or any other Wi-Fi device to connect to the NETGEAR-EXT Wi-Fi network.

Once connected, the device Extender LED will turn green.

Open any internet browser such as Internet Explorer, Mozilla Firefox, or Google Chrome.

Now type www.my.wifiext.net in the address bar.

Tap the NEW EXTENDER SETUP option.

Complete the extender setup by filling the required details on the screen and then click Next.

This account is created for your EX7000 GUI user name and password.

The Netgear genie page appears, select the option Wi-Fi Range Extender.

Choose your Wi-Fi which you wish to extend and then click Next. Note: If the router doesn’t support the 5GHz band, uncheck the 5Ghz option before clicking Next.

Type your Network pass-phrase or key and click Next. You can now also change the SSID and pass-phrase of your Wi-Fi range extender, or continue with the existing network and password.

Click the Next option to save the settings.

Once you finish saving the settings, connect the wireless device to the EX7000 SSID before clicking Continue.

The Extender is now connected to the existing Wi-Fi network successfully. Click the Next option to proceed further.

Now fill the product registration form to access product support, information on new products, software update & notifications. After filling in the form, click the Finish option.

Note: If your device is already registered, you can click on the Skip registration option, which is found on the top of the page.

Get more information for how to install Netgear router, connect with the technical experts. know more go to https://www.howtosetupthis.com/