laszloremi

[laszloremi]

How do I check if my Linksys router is working?

If you are passing through difficult times to connect to the internet using your router, then you have launched on the right website. Your Linksys Velop tri-band router is the center of all internet-related activity. If you are messing up with a fast, reliable, and strong connection, it's always better to check your router and its settings. You should work on the following suggestions given in this article to test whether your Linksys Velop tri-band device is the cause of your connection woes. The underlying solution on this page will surely troubleshoot it. You can get back online as quickly as possible.

Linksys Velop tri-band router obvious stuff

Before moving ahead to the more complicated techniques, let's try a few simple and easy fixes. Sometimes a simple and easy technique will be enough to resolve your troubles. You can also restore your internet connection.

1. Switch off and switch on the router

First of all, switch off your Linksys Velop tri-band device and wait for a few minutes. After a few minutes, turn the device on and check whether the internet connection is back up and running.

2. Check whether there is an issue with the ISP

Using the status page of your internet service provider, you can access the entire information about your router. If you are unaware of your ISP, try Google the name of your service provider. Visit the search bar of Google and type in a phrase such as 'Service Status' or 'Outage map'.

3. Try connecting using a different device

If you are experiencing any issues with a single configuration device, the possibility is that the problem may lie with your configuration device, like a computer, PC, or laptop, not the internet connection. It is a good way to test your connection using at least two-three internet-enabled devices. If this device manages to connect without any issue, then your router might not have any fault.

4. Connect to the Ethernet cable

While struggling to get the internet connection for your Linksys Velop tri-band device, connecting your computer directly to the LAN port of your router will surely provide you positive results. Moreover, many factors may interrupt a WIFI connection, including physical barriers, such as heavy electronic gadgets, fridge, AC, microwave, oven, thick walls, etc. Removing physical barriers will help you resolve your Linksys router setup issues with the internet connection.

 5. Try a Different Ethernet cable

If still, you are getting Linksys router setup internet connection issues, try replacing your existing Ethernet cable. Sometimes rats damage the cables thus resulting in a lost internet connection problem. In this situation, try to replace your damaged Ethernet cable and get a new one. Also, check that the cable is firmly connected to the router, modem, and computer.

6. Linksys Router setup- Change the WIFI connection

However, you are managing to communicate to the network over WIFI, getting slow performance, then check your WIFI channel may be busy with traffic due to overuse in your locality. If so, then manually change your WIFI network channel through the settings of your Linksys Velop support. Grabbing your Linksys Velop tri-band router's settings will require an IP address of your router. Usually, most of the routers use the following IP addresses to get on the default login page:

192.168.1.1, 192.168.0.1, 1.0.0.0.1, 192.168.1.2.254, or similar. Enter these details into your browser and click the enter switch on your keyboard. You will be prompted for the default login name and password. As in most cases, it is the phrase ADMIN and PASSWORD. If you have not changed the default login credentials, then the phrases ADMIN and PASSWORD will surely work.  

7. Reset your Linksys Velop Tri-Band

Resetting your Linksys router to factory default configuration is the more radical step up from power cycling or rebooting your router. Reset will restore all the default configuration settings of your device. The reset steps may vary depending on the model number of your Linksys Velop tri-band device. Commonly, most of the WIFI devices have the same reset process, which is by pressing the hard reset button on it. Pick a reset pin or a refill of a pen, and then press the reset button located inside a tiny hole. Keep on pressing and holding the reset button for about twenty seconds, and then release. After reset, check whether your device has connected to the network or not.

8. Linksys Velop support- Firmware Update

Another solution for this problem is updating the firmware of your device. An older or expired version of the firmware may cause an internet connection issue in your device. You can find the firmware update option under the settings of your device. Go to the settings section, check for the firmware update, and then update the firmware of your Linksys Velop tri-band device.