lisungrp06

[lisungrp06]

the salt spray test is a method of artificially simulating salt spray environmental conditions to accelerate the corrosion resistance evaluation. Usually, the test only takes a few days or even a few hours, greatly improve the efficiency of the experiment.

[lisungrp06]

The Salt Spray Test Chamber can be used to evaluate the salt spray corrosion resistance of materials and their protective coatings, compare the process quality of similar protective coatings, and evaluate the salt spray corrosion resistance of certain products. It is used for salt spray corrosion testing of protective layers of parts, electronic components and metal materials and industrial products.

[lisungrp06]

The Salt Spray Test Chamber is an environmental test equipment that evaluates the corrosion resistance of products or metal materials by artificially simulating salt spray environmental conditions. The chloride concentration in the salt spray environment can be several or tens of times the salt spray content of the general natural environment, which greatly increases the corrosion rate.

[lisungrp06]

The salt spray test chamber mainly tests the corrosion resistance of various materials after the surface treatment of various materials, including coating, electroplating, inorganic and surface film, anodizing, anti-rust oil and other anti-corrosion treatments.

[lisungrp06]

The principle of the Spectroradiometer & Integrating Sphere test system is to measure the illuminance of a certain point on the integrating sphere, calculate the radiant flux at a certain wavelength, and finally calculate the total luminous flux of the light source, but the Goniophotometer generally measures the light intensity distribution of the luminaires and calculates the luminous flux of the luminaires.

[lisungrp06]

The salt spray test machine is also called the salt spray test chamber, the full name is the salt spray test chamber, which is mainly used to test the corrosion resistance of the samples. At present, it is widely used in the aerospace industry, automotive electronics, electronics and electrical, mobile phone digital, plastic products, metal materials and other industries to test its corrosion resistance.

[lisungrp06]

This customer is a leading manufacturer of LED industry in India. The company began to produce and develop LED lamps, power converters, fans, PCB assembly, etc. for railways very early. In addition, all equipment in this customer factory is certified and calibrated to produce high-quality products required by the railway.

[lisungrp06]

The client is an Australian designer and manufacturer of innovative lighting. In addition, the company has been engaged in the lighting industry for many years. While we were producing the equipment, customers were decorating dark rooms. Due to the epidemic, we cannot provide on-site installation training services for customers.

[lisungrp06]

The client is an importer in Italy. Due to the development trend of the epidemic and the continuous expansion of market demand, the company’s business has turned to KN95 masks and melt blown cloth required for KN95 masks.

[lisungrp06]

This customer entered the LED industry in India relatively early. They started as a retailer of lighting products. With a strong economic foundation and customer’s satisfaction, the company has developed rapidly over the years and has become one of the country’s largest manufacturers of LED lights.

[lisungrp06]

Although this Indian customer factory has just been established, their engineers and boss are all experienced and have been in the LED industry for more than ten years. This customer mainly LED bulbs, small street lights, flood lights, drivers, etc. manufacturer.

[lisungrp06]

This customer is a relatively large-scale LED manufacturer in France. They weren’t professionally engaged in the LED industry at the beginning. Later, they realized the importance of the LED lighting industry and they are also professional for the lighting industry, so they focused on the LED lighting products The company is an expert in the design and manufacture of various lamps, ceiling lamps and LED lighting. 

[lisungrp06]

The goniophotometer and other products are effectively manufactured in the company. Our items are passed in all types of testing and then and delivered to the customers. We are the leading one for delivering the testing items to the people in the market.

[lisungrp06]

The full name of IEC 60068-2-75 is Glowing/hot-wire based test methods-Glow wire apparatus and common test procedure. It has been prepared by IEC technical committee 89:Fire hazard testing. The following is the original content of IEC60695-2-10 -1 Scope.

[lisungrp06]

The full name of IEC 60068-2-75 is Glowing/hot-wire based test methods-Glow wire apparatus and common test procedure. It has been prepared by IEC technical committee 89:Fire hazard testing. The following is the original content of IEC60695-2-10 -1 Scope.

[lisungrp06]

The full name of IEC 60068-2-75 is Glowing/hot-wire based test methods-Glow wire apparatus and common test procedure. It has been prepared by IEC technical committee 89:Fire hazard testing. The following is the original content of IEC60695-2-10 -1 Scope.

[lisungrp06]

The full name of IEC 60068-2-75 is Glowing/hot-wire based test methods-Glow wire apparatus and common test procedure. It has been prepared by IEC technical committee 89:Fire hazard testing. The following is the original content of IEC60695-2-10 -1 Scope.