mikey-n64

[mikey-n64]

guys are we genuinely cooked

[mikey-n64]

Reblog if your art project has not, does not, and never will make use of generative ai at any point in your creative process.

[mikey-n64]

Spoiler-based Theory! Check tags before reading!

So I just finished the game yesterday and then rambled about it with my friend. But today I had an epiphany.

Gerson was Destroying the Prophecy Panels he didn't like.

-Since he used the Prophecy as the base of his book, he's well aware about the ENTIRE thing.

-Those panels were either 1; hiding something behind them, or 2; Something either he didn't put in his story by choice, or something he knew was coming up and didn't want the Squad to see.

-He's been on both sides of Inspiration; He based Hammer Lord on the Prophecy, which then further inspired Dragon Blazers.

-And now that the prophecy is happening in front of him, with it setting him up to be a boss, with the power to do things, He sees what's coming and says;

'Oh no you don't, I know my stories buddy. Mine changed, that video game changed, and no matter how much steel yarn you're spinning with fate's loom, you are a story. And that means you can change like any other tale. Now if you'll excuse me I gotta get this letter out, and do some editorial work.'

[mikey-n64]

a writing competition i was going to participate in again this year has announced that they now allow AI generated content to be submitted

their reasoning being that "we couldn't ban it even if we wanted to, every writer already uses it anyway"

"Every writer"?

come on

[mikey-n64]

Spread this like wildfire. Thank goodness.

[mikey-n64]

Netanyahu decided today to continue the war. This means more children will be killed and many lives will be lost.

And don't forget the difficult humanitarian conditions of hunger and lack of basic resources for life. Let us be understanding and logical and take a serious stand with the oppressed Palestinian people. Let's come together toward justice and humanity. Don't get tired of standing by our side and supporting us financially by donating here and supporting us morally by participating and interacting. From the bottom of my heart, my family and I say thank you to everyone.

[mikey-n64]

🇺🇸🇨🇦🇲🇽recall of more than one million 90 quart rolling igloo coolers due to crushing and amputation hazard🇲🇽🇨🇦🇺🇸

multiple finger injuries, lacerations, bone fractures, and amputations have been reported.

CPSC recall link for the united states

health canada recall link for canada

(no official government recall link for mexico was included in this announcement, and I could not find one.)

dozens of model numbers are being recalled, and this is only a few of them. for a more complete recall announcement and complete list of recalled coolers, check the CPSC or health canada link.

Name of Product: Igloo 90 Qt. Flip & Tow Rolling Coolers Hazard: The tow handle can pinch consumers’ fingertips against the cooler, posing fingertip amputation and crushing hazards. Remedy: Replace Recall Date: February 13, 2025 Units: About 1,060,000 (In addition, about 47,000 in Canada and 23,000 in Mexico)

the problem here is the handle. it was designed in a way that has caused a lot of injuries. all of the reported injuries were in the united states. according to the full recall listing, this recall only affects coolers manufactured before january 2024.

The date of manufacture is imprinted on the bottom of the cooler in a circular pattern with an arrow pointing to the month of manufacture and the last two digits of the year of manufacture inside the circle.

here is how to locate the date of manufacture.

Remedy: Consumers should immediately stop using the recalled coolers and contact Igloo for a free replacement handle. Incidents/Injuries: The firm has received 12 reports of fingertip injuries, including fingertip amputations, bone fractures, and lacerations. Sold At: Costco, Target, Academy, Dick’s and other stores nationwide, and online at Amazon.com, Igloocoolers.com, and other websites from January 2019 through January 2025 for between $80 and $140.

yeah. some people had their fingers amputated. and considering they were able to make better handles, these should have been designed better.

keep as many of your fingers as possible! check your cooler!

for a full list of models being recalled, check out whichever link is most relevant to you!

[mikey-n64]

Funny about that...

[mikey-n64]

[mikey-n64]

it’s-friday.avi

[mikey-n64]

General PSA's for begginer alt crafting

- superglue heats up when in contact with fiber, your craft can start smoking or even catch on fire

- you can wash clothing painted with acrylic paint in the washing machine if you turn it inside out and use the lowest temperature

- don't put painted clothes in the dryer.

- you can wash clothes with metal bits in the washing machine but use the handwashing setting, dry the metal bits with a paper towel before hanging them to dry, and know that it WILL be loud

- synthetic dye is needed to dye synthetic fibers and requires a long time simmering in a boiling pot. This WILL stink up the house and you NEVER want to make food in that pot again

- faux leather is vinyl not leather. Get vinyl paint to paint on it

- don't use your teeth as tools, they don't regenerate. Reconstructing enamel costs a small fortune (ask me how I know.)

- when handsewing a lot through thick fabric get thin needles, it will require less force and be less taxing on your wrists. When machine sewing get a higher grade needle (~130 for jean)

- embroidery floss is overpriced and not as strong as it looks. For sewing on heavy stuff get denim thread, it will last forever

- don't feed a 60$ home sewing machine ten layers of denim before you learn how much a servicing fee costs, these things are dellicate

- spray paint is best applied from 30-40cm away, in swift movements. Putting too much or applying from too close will cause drips. You can sand them down and apply a new layer of paint AFTER they dry. Wipe the can nozzle after painting if it's messy, you don't want it to clog and become unusable

- water based markers on fabric will bleed, if not instantly then with time, alcohol markers will fade with time

- most fabric glues are machine washable up to a certain temperature. modgepodge is not waterproof, hitack is handwash only. Check the instructions

- the flatter the surface the easier hot glue will peel off. Faux leather stands no chance, fibers like yarn will hold it best, but is impossible to remove the glue from them in the future

- rivets are a thing that exists, only require a hammer to install and can be used as permanent fabric attachment

- studs, gromets and other metal junk at small fabric stores are laughably overspriced

- acetone (found in nail polish remover) will remove acrylic stains out of furniture, flooring and faux leather, if used in excess can damage the laquer. Can also be used to remove prints and glue off of plastic (do a small test before commiting, might melt the plastic it it's grade is low)

- residue from stickers (and k-tape) can be removed with oil

- acrylic stains cannot be removed out of clothing or carpet so protect your area before painting and don't wear clothes you care about

- if your thread keeps getting tangled or snagging while handsewing try waxing it

- you can lock in screw-in spikes with screw lock glue if you're scared of them falling off because they unscrew

- you can add washers to screw-in spikes if you're scared of them falling through flimsy fabric or too big of a hole

- if you're making anything out of soda cans have a metal file on hand, they are deceptively sharp and will hurt you and rip through fabric you're installing them in

- bleach can be found in mold killing spray (don't touch that shit with bare hands. chemical burn.)

- fabric paints are no different from slightly dilluted acrylic. You can make it yourself by adding a bit of fabric softener to acrylic or honestly even water

- if you are setting anything with an iron use parchment paper or a pressing cloth to pervent your stuff from sticking to your iron and ruining it

- if you want a safety pin somewhere permanently pinch it shut with pliers

- as much as you can, avoid putting glue on clothing, it makes it really hard to change your decisions later on and upcycle the project in the future

- kiss your friends

[mikey-n64]

it may take me a month to put out a chapter but at least im not using ai to write it.

it may take me a month to put out a chapter but at least im not using ai to write it.

it may take me a month to put out a chapter but at least im not using ai to write it.

it may take me a month to put out a chapter but at least im not using ai to write it.

it may take me a month to put out a chapter but at least im not using ai to write it.

IT MAY TAKE ME A MONTH TO PUT OUT A CHAPTER BUT AT LEAST IM NOT USING AI TO WRITE IT

[mikey-n64]

Dragons of the Exonox

A story of Dragons, Humans, and a special festival known as the Exonox. We follow the family of a mother dragon and her two cubs, Kiros and Ayama as they prepare for the annual human Exonox festival. Things are not as they seem however, as their mother requests her children do not meet with the human Elders this time. Ayama, who has gone before, is upset as she now has to care for her younger brother Kiros and keep him out of trouble.

This comic was exclusively on my Patreon... but... Patreon hasn't worked out. I've been wanting to show this comic off for a while, so I decided to show it off here 🥰

This extremely rough comic truly only came out of a want to draw dragons. 🐉 I love drawing anthropomorphic type caricatures and everybody loves dragons! I really like this premise and I can leave it as it is or expand it, which is a great opportunity for comic making.

When I’m done with my current project(s), I may make my plans for this one! Though it is very expansive, so we‘ll have to see if I actually want to draw it in the future.

If you look close enough, I made sure these dragons have fruit bat like type teeth. So they are mainly Frugivores, which are animals that eat only fruit!

[mikey-n64]

If I Had One More Chance, I’d Live It With You  - Submitted by waluigis-elbow

#6960BD #514297 #764D98 #521466 #9A94BB #E6E4FF

[mikey-n64]

I'm almost done cooking new brushes 🧎🏿‍♀️

[mikey-n64]

goomba