taeweoncrane

[taeweoncrane]

Overview of Taeweon  Crop, high Quality Sheave Products

Taeweon manufacture all Sheave according customer's requirements and JIS standard. Also provide satisfaction to user with high quality, competitive price, and good performance of product and delivery in time. Always doing R&D works for improvement what customer's need.

FF Type

•        Full forging

•        Non-Welding

•        Small size

Using raw forged material and Machine work FF model can make any shape of sheave which according customer's design. But consider of competitiveness, proper at small size

RF-1 Type

•        Rolling & Forging

•        2 Welding spot

•        Hot Forging

•        No crack-risk at Rim(No-welding)

RF type of sheave is our company major production method. This method provides best competitive goods with high quality. Using less welding spot compare with Tp type, it can be risk-reduction of crack defect at Rim parts. Guaranteed long term life of products

RF-2 Type

•        Rolling and Forging

•        2 Welding spot

•        Hot Forging

•        Improve loads capacity

Improved welding skill of RF-1 type it can obtain more stable performance and load capacity, due to weld at among plate instead of Boss and plate. Get rid of cause of crack-risk at Boss's welding spot.

TP Type

•        Two Plate

•        4 Welding spot

•        Roll Forging(groove)

•        Large size

Using Groove of forged material and two plates it can more disperse press which according to heavy loads. Proper using at Oil-field with large-sizes

Feature

•        High quality & strength

•        Low cost

•        Longer life cycle

•        Strong wear-resistance

•        Reduction of weight

•        Shorter lead time (delivery)

Reliability - hardness

•        High Frequency

•        HRC 45-55 (surface)

•        Depth 3-5mm

•        Minimum 20 HRC (5mm)

Compare of abrasion loss by materials

•        The results of cast products show deep pressure scarring.

•        The best results were obtained with S45C with heat-treatment.

•        That is, S45C (RF Type) is considered the best standard material.

In same condition, Carbon-steel has an excellent abrasion resistance than Cast-iron; Case of carbon-steel, there is little variation at initial stage (Until 300,000 cycles)

Are you looking for sheave, lifting and rigging equipment and crane drum brake supplier in Korea? Taeweon - Best sheave manufacturer in Korea. They provide reliable core parts of transport equipment to customer and partners. We support our customer’s business with competitive price and high quality.

[taeweoncrane]

Overview of Taeweon Corp - Core parts of transport equipment

Taeweon Corp Provide reliable core parts of transport equipment to customer and partners. They support our customer’s business with competitive price and high quality.

Market Application

·         Port facilities

·         Container crane

·         Transfer crane (RMQC, RMGC, and RTGC)

Mega Industry

·         Goliath Crane - Ship Yard

·         Gantry Crane - Ship Yard

·         Floating Crane

·         Polar Crane – Nuclear Power Plants

·         Unloader – Harbor, Mine

·         Life facilities

Still Works

·         Ladle Crane

·         Over Head Crane (EOC, EOTC)

·         Tong Crane

·         Crab

·         Loader, Coil Lift

Sheave

·         Materials: S35C (AISI 1035, CF35), S45C

·         Specification: Φ500~Φ2000

·         Application: Crane for Maritime, Iron Works, MRO

Hook Block

·         Materials: Forged material

·         Specification: 10Ton~900Ton

·         Application: Crane for Maritime, Iron Works, MRO

Wheel

·         Materials: Forged material

·         Specification: Φ300~Φ1050

·         Application: Crane for Maritime, Iron Works, MRO

Drum

·         Materials: S45C

·         Specification: 10Ton~500Ton

·         Application: Crane for Maritime, Iron Works, MRO

Are you looking for sheave, Crane, lifting and rigging equipment supplier in Korea? Taeweon - Best transport Equipment Company in Korea. They provide reliable core parts of transport equipment to customer and partners.

[taeweoncrane]

Overview of Taeweon Sheave manufacturer in Korea

Sheave

Taeweon manufacture all Sheave according customer's requirements and JIS standard. Also provide satisfaction to user with high quality, competitive price, and good performance of product and delivery in time. Always doing R&D works for improvement what customer's need.

FF Type

•        Full forging

•        Non-Welding

•        Small size

Using raw forged material and Machine work FF model can make any shape of sheave which according customer's design. But consider of competitiveness, proper at small size

RF-1 Type

•        Rolling & Forging

•        2 Welding spot

•        Hot Forging

•        No crack-risk at Rim(No-welding)

RF type of sheave is our company major production method. This method provides best competitive goods with high quality. Using less welding spot compare with Tp type, it can be risk-reduction of crack defect at Rim parts. Guaranteed long term life of products

RF-2 Type

•        Rolling and Forging

•        2 Welding spot

•        Hot Forging

•        Improve loads capacity

Improved welding skill of RF-1 type it can obtain more stable performance and load capacity, due to weld at among plate instead of Boss and plate. Get rid of cause of crack-risk at Boss's welding spot.

TP Type

•        Two Plate

•        4 Welding spot

•        Roll Forging(groove)

•        Large size

Using Groove of forged material and two plates it can more disperse press which according to heavy loads. Proper using at Oil-field with large-sizes

Feature

•        High quality & strength

•        Low cost

•        Longer life cycle

•        Strong wear-resistance

•        Reduction of weight

•        Shorter lead time (delivery)

Reliability - hardness

•        High Frequency

•        HRC 45-55 (surface)

•        Depth 3-5mm

•        Minimum 20 HRC (5mm)

Compare of abrasion loss by materials

•        The results of cast products show deep pressure scarring.

•        The best results were obtained with S45C with heat-treatment.

•        That is, S45C (RF Type) is considered the best standard material.

In same condition, Carbon-steel has an excellent abrasion resistance than Cast-iron; Case of carbon-steel, there is little variation at initial stage (Until 300,000 cycles)

Are you looking for sheave, lifting and rigging equipment and crane drum brake supplier in Korea? Taeweon - Best sheave manufacturer in Korea. They provide reliable core parts of transport equipment to customer and partners. We support our customer’s business with competitive price and high quality.

[taeweoncrane]

Overview of a leading transport equipment manufacturing company in Korea - Taeweon

Taeweon, a leading transport equipment company in Korea. They provide reliable core parts of transport equipment to customer and partners. We support our customer’s business with competitive price and high quality.

Market - Application

Port Facilities

Container Crane

Transfer Crane ( RMQC, RMGC, RTGC )

Still Works

Ladle Crane

Over Head Crane ( E0C, EOTC )

Tong Crane

Crab

Loader, Coil Lift

Mega Industry

Goliath Crane

Ship Yard

Gantry Crane

Ship Yard

Floating Crane

Polar Crane

Nuclear Power Plants

Unloader

Harbor, Mine

Lift facilities

Business

Forging

Hook, Wheel, Shaft

Forging - Rolling & Forging

Sheave (Max 02000)

Machining

MCT, CNC, Boiling

Heat Treatment

High Frequency

- HRC 45-55, Hardness of depth 3-5mm

Spray Quenching

Painting

SA2.5+ 1st layer + 2nd layer+3rd layer

Total thickness 225- 275 micron

Assembly

Hook Block

Wheel Assembly, Bogie, Balancer, Saddle

Trolley, Head block, Lift beam.

Sheave

We are the leading sheave manufactures in Korea. Get the best quality items from us

Materials: S35C (AISI 1035, CF35), S45C

Specification: F500~F2000

Application: Crane for Maritime, Iron Works, MRO

Hook Block

Materials: Forged material

Specification: 10Ton~900Ton

Application: Crane for Maritime, Iron Works, MRO

Wheel

Materials: Forged material

Specification: F300~F1050

Application: Crane for Maritime, Iron Works, MRO

Drum

Materials: S45C

Specification: 10Ton~500Ton

Application: Crane for Maritime, Iron Works, MRO