#D-Link Extender Blinking Orange Light Issue

[fatkinson2901]

D-Link Extender Blinking Orange? Here’s How to Fix It!

The D-Link Extender Blinking Orange Light Issue often indicates a problem with the connection to your main router. However, to fix it, ensure the extender is within range and try power cycling both devices. You might need to reconfigure the extender using the D-Link setup wizard. For more details, visit our website.  

[dlinklocalrouter]

How To Fix The D-Link Extender Light Blinking Issue?

Presently, the D-link extender is prevalent as one of the most noteworthy extenders. However, this networking device offers a myriad of exclusive benefits to users, but still  D-link extender light blinking issue could be more frustrating.

Generally, the D-Link extender’s LED lights can show red and orange lights. Each light blinks for a specific reason.  If you are eager to have an idea about the key troubleshooting tips for blinking red and orange lights on your D-Link extender, must go through the information given in this blog post.

Let’s explore the blog!

Troubleshooting Tips For The D-Link Extender Light Blinking Issue

If you are one of the users who don’t know the solutions for the blinking red and orange lights on the LED lights of your D-Link extender, this section is for you to read thoroughly. Let’s have a glance at the key fixes mentioned for both the red and orange light blinking.

Fixes For The D-Link Extender Red Light Issue

It lets you know about the network problem with your D-Link extender. This issue can be resolved-

Ensure your D-Link Extender is connected to a functioning electrical outlet. 

Repair the wall socket 

Plug the extender into a different working outlet

Consider using an Uninterruptible Power Supply (UPS)

Find out the reasons for frequent power outages.

Position the extender within the Wi-Fi router’s range.

Verify Network Connection

Check for the latest firmware version available 

Perform a factory reset on the extender.

Solutions For D-Link Extender Blinking Orange Light Issue

This light indicates that your D-Link extender is recovering due to the corrupted firmware. Helpful fixes are-

Check if there’s a newer firmware version available for your extender to resolve compatibility issues and improve performance.

Reset the extender 

If the orange light persists, consider reaching out to D-Link customer support for additional troubleshooting tips and guidance.

Bottom-line 

Hopefully, after walking through the information given in this blog post, you will be familiar with the D-link extender light blinking issue. The best part is that here you will get knowledge about the troubleshooting tips to get rid of the D-link extender blinking red light and orange light issue.

[lisa-mathew]

How to Fix D-Link Wifi Extender Blinking Orange Light?

When the D-Link wifi extender blinking orange light, it is because of a firmware fault. There could be some other small issues with your extender as well. You don’t have to worry, it doesn’t mean there’s anything majorly wrong with your extender. The D-Link extender flashing orange light is quite common.

You need to fix this issue as soon as possible. As you don’t want it to get too worst. If you want to fix this issue, you don’t need to worry! In this blog, we’ll guide you through the troubleshooting methods.

Troubleshooting D-Link Extender Flashing Orange Light Issue

There are three ways to fix the D-Link wifi extender blinking orange. You need to follow these methods carefully so as to not worsen the issue. These methods are as follows:

Power Cycle the Router

First, you need to power off the D-Link wifi extender.

Next, unplug it from the electrical outlet.

Then, wait for some time and then plug it back in and power it on.

Afterward, give it some time to come back to life.

Update the Firmware

First, you need to download the latest firmware of the extender.

Next, the file can be downloaded from the official website.

You just need to go to downloads enter the model number and download the file.

Then, using a web browser, log into the extender’s admin panel.

After that, go to the ‘Firmware Upgrade’ page and then you can follow the given instructions.

When the upgrade is complete, the D-Link extender flashing orange light issue should be resolved.

Reset the Extender

Firstly, you need to locate the reset button on the extender.

Secondly, using a pin or a similar sharp object, press the reset button.

Thirdly, release the button after 10 seconds.

Then, give the extender some time to turn back on.

These are the methods that you can try to fix the D-Link Wifi extender blinking orange. Just keep in mind, after the reset, you will have to configure the extender again. Resetting the router restores the factory default settings of the extender.

If you are still facing any issues, you can contact our team. We’ll help you resolve the issue.

[richardsmith74roy]

How do I connect my D-Link Wi-Fi extender to my router without WPS?

If you have bought the d���link wi-fi extender (Dlinkap – 1520) and you don’t have a WPS button in your Dlink router then there is no need to get worried, because in this article we brief about the step-by-step method for How do I connect my D-Link Wi-Fi extender to my router without WPS?

Follow these steps to get connected with my Dlinkap wi-fi extender to the router without WPS:

Connect one end of the ethernet cable with dlinkap extender’s internet port and other ends of ethernet cable get connected with the internet port of the Dlink router.

In any case, if you don’t have a Dlinkap extender and you only have the same site system for some time then no need to get worried you just have to set up your Wi-Fi extender.

Connect your one end of the ethernet cable in the LAN port of the extender, and then connect the other end of the ethernet cable to the Ethernet socket of each device that can access the internet.

Now, after setting up the connection with the dlinkap extender and LAN extender turn on your system > open the default web browser and enter the IP address of Dlinkap extender in the address bar or enter the link dlinkap.local.

Once you enter the IP address of the Dlinkap extender and press enter. That IP address will redirect your Dlink router login page and one pop-up box will display on your screen.

Enter the default username and password of the dlinkap extender, which is mentioned on the backside of the extender.

You will successfully get logged in dlinkap admin panel.

Select Wireless option in that and type the network name in the SSID field and press the save button.

Now, we will go for the Wireless Security section, those the security type, and set the password.

Please remember that your choice may vary with the variant operating system you are using. And if you follow the proper instructions then, you can easily connect your dlinkap extender with Dlink router without WPS.

Now, unplug both the dlinkap extender and router from the ethernet.

And get place the dlinkap extender in the zone of the router.

Now, click on the wi-fi symbol and get the scan the network, wait till the system detect the network name.

After getting detected the network name enter the password which you had set in the security panel and press connect.

Now your dlinkap extender successfully connected with your Dlink router.

How do I set up my Dlink Wi-Fi extender?

Here, we have mentioned two ways for How do I set up my Dlink Wi-Fi extender? Let’s go through those setups one by one:

WPS Setup

If you go with WPS dlinkap wi-fi extender then you should have that compatible router with yourself.

Note: when you go for configuration of your range extender with WPS, that will create a new network name for an extended signal with an existing network which one you are extending. Both contain the same name (the extender network name and the Wi-Fi network name) the difference is the extended network has _EXT with the network name and the password is the same for both of them.

Step 1: Plug in the dlinkap extender in the vicinity of the router. Press the WPS button and wait till the LED light blink in amber color

Step 2: Press the WPS button of the router and 3 sec

Step 3: Once you confirm that the WPS LED light blinking in your router then check the WPS light of dlinkap extender if it's not turned on then press it for 3 sec. 

Step 4: If the LED light will blink green in color in solid form, then we can say that it gets connected successfully with the router. 

Step 5: LED light will turn solid green form as result, now you can unplug your extender and place that wherever you want to work wirelessly with well speed network

Step 6: If you want to connect with your dlinkap extender wirelessly, then use the wireless network device and click on the wi-fi icon to scan the list of networks that are active at that time

Step 7: Now, detect the network name with -EXT and select that network and enter their password and the password would be the same as the extended network.

Manual Set-up

Step1: Plug in the range extender (First -the light will turn red and after a couple of minutes that will turn orange)

Step 2: Now, turn on your wireless computer/mobile device and scan the wi-fi network, which wi-fi network is active that time and press on your network SSID name and get connect with the network

Step 3: Open the web browser and enter the dlink login link: http://dlinkap.local or http://dlinkap and press enter

Step 4: That link will redirect you to the range extender configuration page and the Install Wizard window will appear

Step 5: If you can’t get accessed the  http://dlinkap.local, try http://192.168.0.50

Step 6: Select the favorable language and click next

Step 7: Now, tap on Extend an Existing Wireless network

Step 8: Now, the dlinkap extender available for the scan of the network, select the network which you want to extend

Step 9: If the selected network is security enabled then after selecting that network they prompted you for the password, So enter that password for that and click next

Step 10: Here you have to enter the network name which your extender will broadcast

Enter the name for 2.4 GHz Wi-fi Network name, 5ghz field name, and the wi-fi password which will be the same for both of them.

Note: Please enter the distinguished name for both the 2.4 GHz and 5 GHz networks that will help you to analyze the network easily and create a password for the future if you want to make changes in the setting of those extended networks.

Step 11: Now, Review the whole setting click save, and finish

Step 12: Now, the WPS LED light will turn green solid, and now you can unplug your extender and place it wherever you want.

Conclusion: Hope so, these all steps for How do I connect my D-Link Wi-Fi extender to my router without WPS? How do I set up my D-Link Wi-Fi extender? Help you out with all your queries, if still, you face any issue then go through the link: dlinkap-local

[dlinklocalrouter]

"D-Link Router Blinking Orange? Top Fixes for Internet Light Problems"

When your d'link orange light flashing on the range extender, it typically indicates a poor or lost connection to your main router. To resolve this, ensure the extender is placed within the optimal range of your router. Try restarting both the extender and your router to re-establish the connection. For persistent issues, drop a line to our experts in the chat box!