#MagicPrefs

[tittaend]

Shake mouse pointer to locate not working magicprefs

Shake mouse pointer to locate not working magicprefs install#

Shake mouse pointer to locate not working magicprefs full#

Shake mouse pointer to locate not working magicprefs software#

Firefox made some adjustments or updates of its own regarding record just as it does for modules, I saw it happen a couple of times before. It seems that something mysterious happened in the relationship between Firefox and the original installation of set point. To my surprise, after the set point has been uninstalled the old mouse M305 scroll normally on pages of text and Web pages.

Shake mouse pointer to locate not working magicprefs software#

I wanted a new installation of the software for the mouse to go with the new mouse. Yesterday, before installing the new mouse M325, I decided to uninstall the Logitech SetPoint software.

Shake mouse pointer to locate not working magicprefs install#

I use the same exact type of install now on another machine with a mouse Logitech M510 and normally scrolls on all pages. So the question is, what would make the mouse wheel behave differently on the Web pages and pages of text, and how can I solve this problem?īTW, this is a clean install of Windows 7 64-bit. It is troubling to move the mouse wheel and don't have anything happen until the third click. On Web pages, it changes and it takes 3 clicks of the mouse wheel to get the page to scroll. Normally, a page will scroll 3 lines for each click of the mouse wheel. I ordered a new mouse, but today I noticed the old mouse normally scroll in text documents, even though the text document is displayed in Firefox (such as the "subject: config" page). I have a Logitech M305 mouse on another machine which is too slow scrolling on Web pages. What would cause the mouse to scroll slowly on Web pages, but normally on text documents?

Shake mouse pointer to locate not working magicprefs full#

You will need to buy the new Magic Mouse (MM2) to ensure full functionality with El Cap and his successors. What is a former Magic Mouse 1 or the new Magic Mouse 2? Now that you have upgraded, the MM1 only partially work with El Capitan. Any help appreciated.īut you did not provide key information. I watched a lot of historic messages with similar problems, but nothing has solved the problem yet. The only way to restore full functionality of the mouse is by restarting the computer. My magic mouse stopped scrolling when I wake my MacBook to sleep 2016. I downloaded a free software called "StartupBooster" and using this to disable or remove some programs, problems with the gel (Take on wood), is gone. Suddenly, the keyboard and the mouse do not respond and I have to restart manually. I installed the new BIOS and Shipset, but that does not change. Given that this only happens when I'm online I make this question to the FireFox support. The keyboard and mouse bluetooth suddenly stops working. I asked this question before using Dell, but none of the answers provided. Kext rejected due to system policy: ĭiagnostics for /Library/Extensions/.VirtualHIDDevice.The keyboard and mouse bluetooth suddenly stops working Mymac:extensions admin$ sudo kextutil .VirtualHIDDevice.kext Library/Extensions/.VirtualHIDDevice.kext failed to load - (libkern/kext) system policy prevents loading check the system/kernel logs for errors or try kextutil(8). Mymac:extensions admin$ sudo kextload .VirtualHIDDevice.kext > Karabiner version: Karabiner-Elements 11.0.0 > even after hours and restarts and reinstallations > the message on the left side of the button and the button itself stay there > the window "System Preferences" appears > I press the button "Open System Preferences > Security & Privacy" Problem in Step 2 of the installation procedure:

[dritaautos]

Windows magicprefs equivilent

Windows magicprefs equivilent for mac#

Windows magicprefs equivilent mac os x#

Windows magicprefs equivilent archive#

Windows magicprefs equivilent full#

Windows magicprefs equivilent software#

HoudahSpot – HoudahSpot helps you manage your files by assigning tags to them. Unlike Quick Look, DropLook windows stay open when you switch to another application, and you can open multiple preview windows at a time. It supports the popular image file formats JPEG, PDF, TIFF and PNG, as well as digital camera formats from Canon, Kodak, Sony, Nikon, Olympus and Fuji cameras.ĭropDMG – The easiest way to create and work with Mac disk images.ĭropLook – Unfortunately, Quick Look is a little bit shy and lonesome: if you’re viewing a Quick Look preview and switch to another application, the preview goes into hiding, and you can only ever have one Quick Look preview open at a time.

Windows magicprefs equivilent archive#

It hides all the icons and leaves nothing but the pure wallpaper.Ĭompress Files – Compress Files is an easy-to-use tool for compress, archive, encrypt files and omit Mac-specific invisible files.ĭragoman – Dragoman batch converts image, photo, music, sound and archive files. When you save a window state, Breeze remembers the relative size and position of the focused window.Ĭamouflage – Do you have way too many items on your desktop? Do you hate cleaning up that mess? Camouflage is the right utility for you.

Windows magicprefs equivilent mac os x#

Acts like another dock.īreeze – Breeze gives you simple window management on Mac OS X through a concept called “window states”. Of sight but yet close at hand and ready to be launched.īlast – Blast keeps track of the files you’ve been using on your computer and gives you super easy and lightning fast access to them.īoxtop – Launch and quit applications from the menubar. Keep windows afloat on top of all others, pin windows to the desktop, turn a window into an “overlay” on your screen that doesn’t hinder your work and more!īerokyo – Berokyo lets you take control over your desktop and organize all your favorite and frequently used applications, documents, files, folders and webpages into one or more customizable multi-shelf cabinets that will keep them out Files and WindowsĪ Better Finder Attributes – Change the file attributes that the Finder won’t let you touch.Īfloat – Download it and it will add many window management features to most Mac applications. Watts – Why use Watts? The battery needs to be recalibrated from time to time to keep the onscreen battery time and percent display accurate, and to keep the battery operating at maximum efficiency. The attributes can be used to detect when a hard drive is having mechanical or electrical problems, and can indicate when the hard drive is failing. SMART (Self-Monitoring, Analysis, and Reporting Technology) is a system built into hard drives by their manufacturers to report on various measurements(called attributes) of a hard drive’s operation. SMART Utility – SMART Utility is an application to scan the internal hardware diagnostics system of hard drives. This is done by ignoring the operating system setting of hiding potentially unsafe resolutions.ĭrive Genius – Try Drive Genius 3, the best hard drive utility on the Mac platform – DrivePulse, Enhanced Defrag, DriveSlim, Enhanced Repartition are only a few of the award-winning features of Drive Genius 3.

Windows magicprefs equivilent full#

Don’t worry… I know that there’s two special keys on the keyboard that do that for you, but currently there are 17 different brightness options for you to select on a Mac which, by all means is enough.ĭisplay Maestro – Display Maestro gives you full control over attached displays, allowing the usage of all available resolutions and bit depths.

Windows magicprefs equivilent for mac#

Hardware Utilitiesĭimmer for Mac – Dimmer is a free application that allows you to adjust the brightness of your display.

Windows magicprefs equivilent software#

Below you’ll find almost every kind of utility you could need, from hardware controllers to maintenance software and file organization tools. We’ve rounded up most handy utilities to improve the basic functionality of your Mac in a number of ways. If you are not into that, I particularly like the design of the Corsair Carbide 540 ( ).Macs are awesome straight out of the box, but that doesn’t mean that you can’t make them a lot better with a few quality downloads. If you are really bold and have the money to spare, you can get a design piece such as the In-Win Z-Tower ( ). Some of them are compact and others are large. There are plenty of nice options, some colorful with bright lights, others austere and elegant. They tend not to be as beautiful or elegant as the Mac Mini, but they are OK.Īlso, the PC towers have evolved a lot since the grey boring cases of the 1990s. Look at a list here of small form factors here. Also, Intel has the so-called Next Unit of Computing (NUC), barebones small factor computers ( (NUC,computer kits designed by Intel). There are several small form factor PCs, some of which are of a size comparable to the Mac Mini.

[pinersup]

Shake mouse pointer to locate not working magicprefs

#SHAKE MOUSE POINTER TO LOCATE NOT WORKING MAGICPREFS INSTALL#

#SHAKE MOUSE POINTER TO LOCATE NOT WORKING MAGICPREFS TV#

#SHAKE MOUSE POINTER TO LOCATE NOT WORKING MAGICPREFS INSTALL#

So I resorted to that repository of all that is Apple OS hacking, InsanelyMac, and one suggested solution was to install the SteerMouse utility this I duly did, rebooted as instructed and, lo and behold, the MagicMouse was now recognized as a Bluetooth device, even though I did not even enable the SteerMouse utility, which appears in the Systems Preferences pane. IoGear Bluetooth adapter – smaller than a fingernail. The HackPro runs OS Snow Leopard 10.6.6 and you need at least 10.6.4 for the Mighty Mouse. At first, System Preferences->Mouse simply refused to recognize the Magic Mouse, even though System Profiler confirms that the minuscule IoGear Bluetooth adapter I have installed in one of the HackPro’s dozen USB ports enables Bluetooth. Needless to add, curiosity got the better of me and I decided to try the Magic Mouse with my desktop HackPro – the desktop computer for the rest of us. On a desktop work computer these are very nice to have. When you are using a mouse to control a MacMini whose primary purpose is to play DVDs and Netflix, you don’t need to access features like the Desktop or the Dashboard with its widgets. Only one finger is needed though Apple’s System Preferences ->Mouse pane shows two being used for sideways scrolling. Scrolling with the MagicMouse is accomplished by dragging one finger vertically on the surface side scrolling by swiping the same finger laterally. I wasn’t too impressed with the specifications on paper as all that multi-touch technology seemed counterintuitive on a mouse, but came to like the Magic Mouse when used on the sofa with the MacMini.Īpple Magic Mouse. Like the Mighty Mouse the Magic Mouse uses a sensor for tracking.

#SHAKE MOUSE POINTER TO LOCATE NOT WORKING MAGICPREFS TV#

Still, I thought no more of all these mouse failures until a MacMini came along to drive the home TV Apple, squeezing the margins as usual, did not ship a mouse with the MacMini so I though, what the heck, I’ll give the new Magic Mouse a shot. You could also program a push on the scroll ball to perform other actions and mine was set to display Dashboard widgets. One really nice feature of the Mighty Mouse was that when you squeezed the sides you could get enhanced actions I had mine set to display the desktop. The Apple Mighty Mouse with the poorly designed scroll wheel. I even tried blasting contact cleaner into the small space around the ball and the thing would fail soon afterwards, shortly after my eyesight recovered from the backwash of toxic spray. While you could vigorously run the little ball around a bit on a piece of paper with the mouse held upside down, after about two or three attempts at this the scrolling feature would fail completely, and given that the mouse was sealed – except for the space around the ball – there was no realistic way of dismantling it to clean the innards. You see, the Magic Mouse worked fine until the scroll sphere would fail owing to the ingress of dirt and grease. That one came in wired and wireless designs and after three of each I finally threw up my hands and gave up on the Apple Mouse. Then along came the Mighty Mouse with that neat little scroll sphere in the top and finally supporting left and right clicks. In the last decade we have had the clear plastic case single-click wired mouse which came with iMacs through maybe 2005. For a company which prides itself on design, past mouse offerings from Apple have been pretty poor.

[pinercardio]

Ishowu audio capture obs

#Ishowu audio capture obs install#

#Ishowu audio capture obs drivers#

#Ishowu audio capture obs driver#

#Ishowu audio capture obs pro#

#Ishowu audio capture obs trial#

Then, you need to add an audio source for OBS audio recording. On your OBS, add a new scene first and name the new scene with your preference. 'Allowed' extensions are stored in a SQLite DB, which can be modified. Just follow these steps, and make your OBS audio recording easier. This is for people that know what they are doing.

#Ishowu audio capture obs install#

See: iShowU Audio Capture kext install problems I want my 'Allow' button back

#Ishowu audio capture obs trial#

Unfortunately it has been through trial and error. All that I know how have eventually gotten the Allow button to show up. I've written a much longer article on other things I've tried with various customers. There doesn't seem to be a particular pattern to this. Some users have reported not having an Allow button at all. Prior to disabling theMacPrefs, I would click allow and nothing would happen. The issue was that I use MacPrefs for my Magic Mouse 2 to give it more functionality and user friendliness and that “program” had to be disabled for me to be able to allow the kext to be fully installed. "I actually just got it figured out early this morning. MagicPrefs: This, from a user recently:.In fact, you can't use any 'assistive' tech at all. Waycom Tablet: Make sure you're not trying to click 'Allow' with the pen.Make 100% sure the kexts are loaded! (the Allow button only shows if you've recently attempted to load a new kext).Go to Security & Privacy in System Preferences.This is covered in steps 5/6/7 of Installing iShowU Studio

#Ishowu audio capture obs drivers#

Stop streaming, recording in OBS, stop streaming at Youtube.Assuming you're using OS 10.13 or later (High Sierra/Mojave), it's likely you havn't enabled the KEXT.Īpple has become somewhat obsessed with security (probably a good thing at the end of the day), and when installing new drivers you have to confirm that the OS can load them.Start streaming in both OBS and youtube.GoToWebinar, has its own sound management, make sure set the audio output to ‘Muti-Output Device’. In fact, OBS is more efficient in capturing the entire screen.iShowU audio: Audio MIDI setup, system sound preference panel set to Muti-output device.Youtube Schedule event, copy streaming name and server URL, configure settings.If necessary, the video can be found in youtube video manager, for later list editing. In youtube Live Control Room-> Stop streaming.

#Ishowu audio capture obs driver#

This new-and-improved audio driver replaces Soundflower and provides new features and improvements in order to make recording audio more stable and easy to do.

When finished, in OBS, stop streaming, stop recording. iShowU Audio Capture is an extension to OS X to record audio from your computer.

Now the video is live! It’s showing my computer windows (the one I captured in step 4) and any sound coming from my system speaker. In youtube ‘Live Control Room’, there should be a stream status displayed now.

In the Mixer, if any system sound is playing, the signal level will show here (Current, system Mic is not mixed, if necessary, reconfigure iShowU Audio to include a Mic).

Select Windows Capture, select desired windows to be capture.

Add a new Scenes, then add a new Source.

In ‘Audio’ Section: Mic/Aux Audio Device -> iShowU audio Capture.

In ‘Output’ section, select ‘Output Mode’ ->Advanced Select ‘Encoder’ -> x264 Rate Control -> CBR (if more motion pictures) / VBR (if less motion, presentation style) Bitrate -> 6000 Use Custom buffer Size -> 8000 Keyframe Interval -> 3 CPU -> Very fast (Birate 6000kbps is base on my actual internet upload speed capability).

In the ‘Streaming’ section, choose ‘Custom Streaming Server’ Paste previous Youtube ‘Primary Server URL ‘ in ‘URL’ Paste ‘Stream Name’ to ‘Stream key’ section.

(Select these two in case bad internet connection)

In ‘General’ -> select Automatically record when streaming and keep recording when stream stops.

Go to system Sound Preference panel, select output to be Multi-Output Device.(Ref: ).

Select drift correction for iShowU Audio Capture. This will mirror Build-in output to iShowU Audio. In the right panel, select both ‘Built-in Output’ and ‘iShowU Audio’.

in Mac, open system ‘Audio MIDI setup’ in Utility under Application in the left panel, add a ‘Multi-Output Device’.

Install OBS and iShowU Audio Capture ( ).

Save changes and to go ‘Live Control room’ setting panel, stay here Select Basic Ingestion -> 3000kbps (1080p)Ĭopy Stream Name and Primary Server URL for later OBS Settings In the proceeding window, in ‘Main Camera’ section Select ‘optimize for less viewer buffing’ In ‘Advanced settings’, Enable live chat, disable Promotions, disable public video statistics. Youtube-> Creator Studio-> Live Streaming -> Events -> New Live Event:įill the basic info (Title, Descriptions) with start and stop time. Internet: 100Mbps download 7Mbps upload First, schedule a Youtube Live Event: OS X El Capitan 10.11.6 + OBS 0.15.1 (Mac Version)

#Ishowu audio capture obs pro#

2015 Macbook pro 13 with 2.7Ghz Intel Core i5 & 8Gb Ram

[hizayamasan]

macOS 10.14 MojaveではHigh Sierraで導入されたセキュリティ機能「SKEL」のブロック通知プロンプトが改善され、プロンプトから環境設定を開くことが可能になっているそうです。詳細は以下から。 AppleがmacOS 10.13 High Sierraから導入した新しいセキュリティ機能「Secure Kernel Extension Loading (以下、SKEL)」はサードパーティー製のカーネル拡張(KEXT:Kernel Extensions)をユーザーの許可なくインストールすることを禁じる新しい機能ですが、この機能はユーザーには導入が通知されておらず、Kextのロードをブロックした際に表示される通知プロンプトも開発者や会社名で表示され、許可方法も起動したアプリからではなく、macOSのシステム環境設定から30分以内に行わなければならないという制約があったため、開発者の方々はこのSKELを許可する様々なチュートリアルを作成していましたが、次期macOS MojaveではこのSKELがもう少し開発者フレンドリーになるそうです。 macOS MojaveのSKEL 　ドイツIOSPIRIT GmbHのエンジニアでRemote Buddyアプリなどを開発しているFelix Schwarzさんは、macOS 10.13 Betaの段階からこのSKELの問題をAppleに指摘(rdar://32922559)しており、以下のようなSKELプロンプトはユーザーに混乱を招くとしてAppleに改善を求めていたそうですが、結局、macOS 10.13 High Sierraではこのプロンプトが採用されたものの、Appleが2018年08月27日にリリースした「macOS Mojave 10.14 beta 9 Build 18A377a」では、ようやくこのSKELのブロック通知プロンプトにシステム環境設定アプリの[セキュリティとプライバシーを開く]ボタンが採用されたそうです。 また、SKELについてはGoogle ChromeやMagicPrefs、SteerMouseなどのアプリを起動していると[許可]ボタンが押せないという不具合や2回のマウスイベントでバイパス出来てしまう脆弱性も確認されていますが、これらもmacOS Mojaveでは��正されているようです。

macOS 10.14 MojaveではHigh Sierraで導入されたセキュリティ機能「SKEL」のブロック通知プロンプトが改善され、プロンプトから環境設定を開くことが可能に。

[helloloading313]

Tuio Mouse Driver For Mac

Boot Camp requires a Mac with an Intel processor.

Tuio Mouse Driver For Mac Windows 7

Mouse Drivers

Ventuz Designer

When you install Microsoft Windows on your Mac, Boot Camp Assistant automatically opens the Boot Camp installer, which installs the latest Windows support software (drivers). If that doesn't happen, or you experience any of the following issues while using Windows on your Mac, follow the steps in this article.

Your Apple mouse, trackpad, or keyboard isn't working in Windows. Force Touch isn't designed to work in Windows.

You don't hear audio from the built-in speakers of your Mac in Windows.

The built-in microphone or camera of your Mac isn't recognized in Windows.

One or more screen resolutions are unavailable for your display in Windows.

You can't adjust the brightness of your built-in display in Windows.

You have issues with Bluetooth or Wi-Fi in Windows.

You get an alert that Apple Software Update has stopped working.

You get a message that your PC has a driver or service that isn't ready for this version of Windows.

Your Mac starts up to a black or blue screen after you install Windows.

Mac Apps for Mouse Drivers Filter. Add customizable gestures to Magic Mouse or MacBook trackpad. BetterTouchTool MagicPrefs. For software and drivers select your product from the list below. Mac OS 10.4.x-10.7 (32-bit and 64-bit). SteerMouse 5.5.4 - Powerful third-party mouse driver. Download the latest versions of the best Mac apps at safe and trusted MacUpdate.

If your Mac has an AMD video card and is having graphics issues in Windows, you might need to update your AMD graphics drivers instead.

Install the latest macOS updates

Before proceeding, install the latest macOS updates, which can include updates to Boot Camp.

Format a USB flash drive

To install the latest Windows support software, you need a 16GB or larger USB flash drive formatted as MS-DOS (FAT).

Start your Mac from macOS.

Plug the USB flash drive into your Mac.

Open Disk Utility, which is in the Utilities folder of your Applications folder.

Choose View > Show All Devices from the menu bar.

From the sidebar in Disk Utility, select your USB flash drive. (Select the drive name, not the volume name beneath it.)

Click the Erase button or tab.

Choose MS-DOS (FAT) as the format and Master Boot Record as the scheme.

Click Erase to format the drive. When done, quit Disk Utility.

Download the Windows support software

After preparing your USB flash drive, complete these steps:

Make sure that your Mac is connected to the Internet.

Open Boot Camp Assistant, which is in the Utilities folder of your Applications folder.

From the menu bar at the top of your screen, choose Action > Download Windows Support Software, then choose your USB flash drive as the save destination. When the download completes, quit Boot Camp Assistant.

Learn what to do if you can't download or save the Windows support software.

Install the Windows support software

After downloading the Windows support software to your flash drive, follow these steps to install the software. (If you're attempting to resolve issues with a Bluetooth mouse or keyboard, it might be easier to use a USB mouse or keyboard until these steps are complete.)

Make sure that the USB flash drive is plugged into your Mac.

Start up your Mac in Windows.

From File Explorer, open the USB flash drive, then open Setup or setup.exe, which is in the WindowsSupport folder or BootCamp folder. When you're asked to allow Boot Camp to make changes to your device, click Yes.

Click Repair to begin installation. If you get an alert that the software hasn't passed Windows Logo testing, click Continue Anyway.

After installation completes, click Finish, then click Yes when you're asked to restart your Mac.

Learn more

If you can't download or save the Windows support software:

If the assistant says that the Windows support software could not be saved to the selected drive, or that the USB flash drive can't be used, make sure that your USB flash drive has a storage capacity of at least 16GB and is formatted correctly.

If the assistant doesn't see your USB flash drive, click Go Back and make sure that the drive is connected directly to the USB port on your Mac—not to a display, hub, or keyboard. Disconnect and reconnect the drive, then click Continue.

If the assistant says that it can't download the software because of a network problem, make sure that your Mac is connected to the Internet.

Make sure that your Mac meets the system requirements to install Windows using Boot Camp.

If a Mac feature still doesn't work after updating the Windows support software, search for your symptom on the Apple support website or Microsoft support website. Some features of your Mac aren't designed to work in Windows.

PD7DXT-WR / PD7DXT

How do I grip the DXT mouse?

Start by placing the tip of the ring finger over the black plastic triangular area beneath the bottom click button. The remaining finger tips and thumb will naturally position themselves on the first half of the front and back mouse surfaces, respectively, with the pinkie finger tucked in. The fingers should be comfortably curled (e.g. holding a pen) versus extended or lying flat.

The resulting hand and finger posture facilitates precision movements and avoids the fingers being placed one upon the other and coming into contact with the cable. It should be noted that the body of the mouse is not placed parallel to the side of the keyboard but at an angle to the side of the keyboard.

What operating systems is the DXT2 compatible with?

The DXT is designed to work on all USB operating systems including Windows, Mac OS X and Linux.

I lost my dongle, can I get a replacement?

Yes, we offer replacement dongles for wireless DXT mice. Please contact sales@kinesis.com. See the Troubleshooting section below for instructions on pairing the new dongle with your mouse.

How do I use my DXT with my left hand?

Simply tap the “L/R” switch on the back of the mouse to switch between left and right handed modes.

How do I charge the wireless DXT mouse?

Connect the includes micro-usb charging cable to the mouse and an available USB port on your computer. The DXT’s rapid-charge system was designed to be charged from a PC, not from another charging devices which could lead to damage.

A full-charge (120 minutes of uninterrupted charging) should last approximately 2 weeks with normal mouse usage. To extend your battery life, use the on/off switch on the underside to turn the mouse off when not in use.

How do I change the cursor speed?

Flip the mouse over and tap the DPI button on the underside to cycle between the four sensititivity levels (500 | 1000 | 1500 | 2000) until you find the one that is right for you. The higher the sensitivity, the more the cursor will move in response to hand movements.

500: 1 Flash

1000: 2 Flashes

1500: 3 Flashes

2000: 4 Flashes

Does the wireless DXT require a bluetooth connection?

No, the wireless DXT uses RF-wireless technology. Simply plug the included RF “dongle” into an available full-size USB port on your PC

Does the DXT require any special drivers?

No, neither DXT Wireless or Wired require any special drivers.

What type of charging cable does the DXT wireless use?

Tuio Mouse Driver For Mac Windows 7

The DXT wireless utilizes a micro USB charging cable.

If your DXT2 ergonomic mouse is not working as expected please reference the FAQs above and the Troubleshooting Tips at right. If your issue persists, please submit a Trouble Ticket using the link at the bottom of the page.

Before you submit a trouble ticket, try connecting the mouse to another computer. If the mouse works on another computer it suggests there is a problem with the original computer. Try reconnecting the mouse and restarting your computer. If that doesn’t work, try removing any custom mouse drivers you may have downloaded for other mice which could be affecting the DXT. If the mouse doesn’t work on the other computer, it suggests there may be a failure with the mouse itself. Please submit a trouble ticket using the link at the bottom of the page.

Mouse Drivers

Confirm the mouse has a battery charge. The mouse will flash the L/R LEDs when the battery is low. If you suspect the battery maybe low, or even dead, connect the charging cable between the mouse and your PC for 120 minutes to restore the mouse to a full charge. The L/R LEDs will illuminate steady when the batter is charging. When the battery is fully charged, the L/R LEDs will turn off.

Before you submit a trouble ticket, try connecting the mouse to another computer. If the mouse works on another computer it suggests there is a problem with the original computer. Try reconnecting the mouse and restarting your computer. If that doesn’t work, try removing any custom mouse drivers you may have downloaded for other mice which could be affecting the DXT. If the mouse doesn’t work on the other computer, it suggests there may be a failure with the mouse itself. Please submit a trouble ticket using the link at the bottom of the page.

The process for pairing a DXT mouse with a replacement dongle depends on what generation mouse you have. Flip the mouse over and take note of the last 5 digits of the serial number.

Serial Number: 07,001 – 09,000

Download Pairing Program Version 1 for Windows:

Switch off the mouse

Plug the new USB dongle into the PC

Switch on the mouse

Run Pairing Program Version 1 and click “PAIR”

Press and hold the upper button and scroll wheel

The Pairing Program will display “Pairing” and then “Success”

Ventuz Designer

Serial Number: 09,001 – 19,999

Download Pairing Program Version 2 for Windows

Switch off the mouse

Plug the new USB dongle into the PC

Switch on the mouse

Run Pairing Program Version 2 and click “PAIR”

Press and hold the upper button and scroll wheel.

The Pairing Program will display “Pairing” and then “Success”

Serial Number: 20,000 and above

Switch off the mouse

Plug the new USB dongle into the PC

Switch on the mouse

Place mouse next to the USB dongle

Press and hold the left, right, and scroll wheel buttons at the same time for 5-10 seconds

All DXT2 mice are backed by a TWO YEAR limited warranty

Not finding your answer?

Submit a trouble ticket and a support technician will respond to you in a timely manner.

[whyhellomynameismary]

fun computer tips with k.

If you’re editing using anything like after effects on a laptop, a mouse increases workflow tenfold - I’m lazy and I use the trackpad too often, but it slows workflow.

A mouse with middle click capability increases that workflow even more when rotoscoping. If you have an apple magic mouse like me, which normally doesn’t have middle click, then a free application like MagicPrefs will SAVE.LIVES. and enable middle click on a magic mouse.

I should go to bed, but I just watch a very intense college game, and there’s no way I’m going to sleep, so its time to do more R O T O S C O P I N G

[micas-blog]

If you like to configure your Magic Mouse to single finger tap as the trackpad does, this is the tool you need.

If you search for a tool with even more features like window snapping or keyboard shortcut configuration or controlling your Mac's mouse from remote by iphone/ipad try https://www.boastr.net/

[dicherri]

For all you Mac + Maya users . . .

Steve Jobs doesn't think we need 3 mouse buttons, but he is very, very wrong. 

I've spent the last month tearing my hair out over the perfect Maya Macbook Pro mouse setup. It's just not convenient to have my Wacom tablet 100% of the time.

I've settled on MagicPrefs over all other tools - with a Magic Mouse.

Here's why- it gives you an option for a middle and right CLICK, not tap. Tap is worthless. WORTHLESS!

Happy MacbookPro Maya-ing.

[maxixam]

My Custom settings of Magic Mouse using “MagicPrefs”.

AppleのMagic Mouseがないと生きていけない。

MagicPrefsというユーティリティを使ってこんな感じにカスタマイズしています。

3本指クリックでウィンドウ閉じる

左指2回タップでスマートズーム

2本指で腹を2回タップでMission Control

手のひらでリンゴマーク上部タップでNotification Center

2本指左右スワイプで戻る・進む

3本指左右スワイプで操作スペース（バーチャルデスクトップ）移動

[thephotoq]

Slap it up side the head and get it to behave with MagicPrefs.