#WerFault.exe application error | Explore Tumblr posts and blogs

awesomemiolikzendus-blog · 5 years ago

Text

Réparer Facilement l'Erreur WerFault.exe (7 Méthodes)

Les erreurs sont la partie la plus frustrante de l'utilisation du système d'exploitation Windows, mais toutes les erreurs doivent être corrigées. "WerFault.exe " est un problème courant dans Windows 7, 8, 8.1 et 10. Dans cet article, je vais vous fournir toutes les informations sur ce problème ainsi que les solutions pour y remédier. Si vous rencontrez des problèmes comme WerMgr.exe et WerFault, vous êtes au bon endroit.

erreur WerFault.exe

Qu'est-ce que WerFault.exe ?

Un processus responsable des Rapports de problèmes Windows sous Microsoft Windows. Cette fonction fournit des mises à jour et notifications aux utilisateurs concernant les défauts d'application et du kernel , les applications non réactives et d'autres problèmes liés aux diverses applications Windows. Le processus peut également fournir aux utilisateurs des fonctions de dépannage et des fonctions d'information. Windows Error Reporting fondamentalement un service qui obtiendra et enverra les journaux des erreurs survenant dans les systèmes Windows à l'adresse suivante Microsoft. Grâce à cette fonctionnalité Microsoft diagnostique le problème et donne également la solution sous la forme de toute mise à jour à installer.

Pourquoi "WerFault.exe Error" se produit-il ?

Erreur WerFault.exe ou erreur WerMgr.exe est généralement rencontré sur Windows 7, 8, 8, 8.1 et 10, car ces derniers systèmes d'exploitation ont un système d'exploitation essentiel. connue sous le nom de " Système de rapport d'erreurs Windows ". Si les erreurs WerMgr.exe et WerFault.exe apparaissent sur votre écran, il y a de fortes chances que ces fichiers ont été corrompus,ou supprimés de leur emplacement ou qu'un virus ou Malware ont infecté votre système. Ces erreurs peuvent ralentir les performances de votre système et causer d'autres erreurs si elles ne sont pas réparées plus tôt, car elles entraînent un niveau de performance très élevé. Utilisation du CPU (environ 90-100%). Il est donc très important que ce problème soit résolue sans délai.

Méthodes pour corriger une erreur WerFault.exe

Je vous fournis les 5 moyens qui vont sûrement réparer l'erreur WerFault.exe ou WerMgr.exe présenté sur votre ordinateur. Vous êtes libre d'essayer chacun d'entre eux ou vous pouvez les essayer un par un. Pour appliquer une méthode, vous devez suivre attentivement les étapes simples qui y sont mentionnées. Méthode 1: Désactiver le service de rapport d'erreurs Windows Maintenez la touche Windows enfoncée et appuyez sur R. Dans la boîte de dialogue d'exécution, tapez services.msc Faites défiler la liste des services sur votre ordinateur et localisez et faites double-cliquez sur le service rapport d'erreurs Windows. Cliquez sur Arrêter. Ouvrez le menu déroulant en face de Type de démarrage et mettez en surbrillance et cliquez sur Désactivé. Cliquez sur Appliquer. Cliquez sur OK. Redémarrez votre ordinateur.

arrêter service de rapport d'erreurs Méthode 2 : Trouver le programme responsable du dysfonctionnement de Werfault.exe et s'en débarrasser Ouvrez le menu Démarrer. Recherchez eventvwr.msc et ouvrez le programme qui s'affiche. Dans L'Observateur des événements ,Sous Résumé des événements administratifs développez la section Erreurs en double-cliquant dessus.

observateur d'événement Trouvez la source responsable de la plupart des erreurs enregistrées dans l'Observateur d'événements au cours de la dernière heure ou lorsque l'erreur est apparue et double-cliquez sur celle-ci. Cliquez sur les cinq-six premières erreurs de la liste qui apparaît dans la nouvelle fenêtre. dans la partie inférieure de la fenêtre qui apparaît dans les champs du nom de l'application de défaut. Trouvez le programme ou l'application auquel le coupable est lié. Vous pouvez soit naviguer sur Internet, soit passer manuellement au crible de votre ordinateur pour trouver le programme ou l'application avec laquelle le coupable est lié.

erreur d'application Vous pouvez soit naviguer sur Internet, soit passer manuellement au crible votre ordinateur pour trouver le programme ou l'application que le coupable est lié à. Désinstallez et supprimez toutes les traces du programme ou de l'application que vous avez trouvé le coupable. Voir aussi: Réparer l’Erreur Esrv.exe Facilement (3 Solutions) Méthode 3: Exécuter l'analyseur de fichiers du système SFC Ouvrir l'invite de commande. Maintenant, écrivez sfc /scannow et appuyez sur Entrée. La commande sfc /scannow analyse tous les fichiers système, et remplace les fichiers corrompus avec une version en cache déjà stockée dans le dossier du cache de Windows. attendez un peu jusqu'à ce que le scan soit terminé. Ensuite, redémarrez votre PC.

commande scannow Méthode 4: Utiliser l'outil de diagnostic de la mémoire Windows Recherche diagnostic de mémoire Windows dans la boîte de recherche Windows 10. Lancez cet outil en cliquant sur l'icône de résultat de recherche. Ensuite, cliquez sur redémarrer maintenant et rechercher les problèmes éventuels(recommandé).

outil diagnostic de mémoire Cet outil s'exécutera et puis trouvera et réparera automatiquement les problèmes liés à la mémoire dans votre système d'exploitation Windows. Voir aussi: Réparer l’Erreur 0x8024a105 Windows Update Méthode 5: Réinstaller les pilotes d'affichage pour réparer WerFault.exe Appuyez sur la touche Windows et maintenez-la enfoncée, puis appuyez sur R pour ouvrir la boîte de commande d'exécution. Puis tapez devmgmt.msc dedans et tapez Entrer . Une fois le gestionnaire de périphériques ouvert, cliquez sur Adaptateurs d'affichage. Désinstallez le pilote. Cliquez sur l'onglet Action. Finalement, cliquez sur recherche les modifications sur le matériel.

désinstaller pilote d'affichage Méthode 6: Désactiver tout logiciel antivirus L'erreur peut être causée par un logiciel antivirus. Si vous avez installé un logiciel antivirus, désactivez-le et voyez si le problème persiste. Si le problème persiste, désinstallez-le.

désactiver Avast Méthode 7: Effectuer la restauration du système Tapez Récupération dans la barre de recherche et sélectionnez Récupération dans la liste. Sélectionnez Ouvrir la restauration du système. La fenêtre Restauration du système s'ouvre. Cliquez sur Suivant pour continuer. Si disponible, Afficher plus de points de restauration. Sélectionnez le point de restauration souhaité et cliquez sur sur Suivant. Suivez les instructions à l'écran pour terminer le processus de restauration.

restauration système Conclusion Si vous avez des doutes ou des questions concernant le sujet, commenter dans la section ci-dessous sans délai. J'espère vous avoir aidé à trouver ce que que vous cherchiez. Read the full article

0 notes

saji7928 · 6 years ago

Text

How to fix Werfault.exe application error in Windows

Reporting Windows Errors in WerFault.exe is a common problem of Windows users. When you are facing errors related with the operating system, Windows features and Applications, It will report to Microsoft and then you’ll receive information about the solutions. In this article, we’ll show you how to permanently disable this error or disable Windows Error Reporting.

Solution 1: Disable the Windows Error Reporting Service

Press "Win+R" at the same time to open "Run" dialog box. Type "services.msc " on the run and hit Enter. Find "Windows Error Reporting Service" in the services list and double click to open it. In the "General Tab", set Startup as "Disable".

Click Apply and Okay.

Solution 2: Update Drivers

Right-Click on the "This PC" and click on the Manage. Click "Device Manager" on the left sidebar. Find "Display adapter", expand it and you will see your graphic driver.

Right-click on your graphics driver and click on the update. Select "Search automatically for updated driver software".

Windows will automatically update your driver. If you have no time or skills to update drivers manually, you can use Driver booster to update drivers automatically. It's super easy and no time-wasting. The software automatically finds your outdated drivers and update them instantly.

Solution 3: Disable Your Antivirus Software

If you did install any Antivirus Software, it might be the problem. So you can disable and try to check the error is still coming. If the problem not solved, try to uninstall them and check. The error definitely solved. If you installed any Antivirus software, I will show you how to uninstall in Windows 10. Also, you can see how to disable Antivirus here. Go to "This PC". Click on the "computer" at the top of the explorer. Find and click "Uninstall or change the program".

Now you can find installed Antivirus software and uninstall it. I hope you solved the problem with these solutions. If you have any further questions? please post a comment. I would love to help you! Read the full article

#app #windows10

0 notes

sofiamartineme · 6 years ago

Text

How to Fix WerFault.exe Application Error

You will face the WerFault.exe application error when you try to use the Microsoft applications like Mail, Settings, Calendar and many others. This issue can be very irritating, but you can solve it by following some simple methods. Go through the instructions mentioned below to get rid of this issue.

Here’s How to Fix WerFault.exe Application Error

• Restarting the Windows Error Reporting Service

1. Go to the Run Utility.

2. For this, you have to press on the Windows and R keys together given on the system keyboard.

3. Enter “services.msc” in the given box without the exclamation mark.

4. Press on the OK button.

5. It will launch the Services tool.

6. The additional way to go to the Control Panel.

7. Find the Control Panel in the Start menu.

8. Find it through the Start menu search option.

9. Once the Control Panel menu gets open, start changing the View by option.

10. It is given at the upper right-hand side of the screen.

11. Go down till you find the Administrative Tools option.

12. Press on the Administrative Tools option.

13. Find the Services shortcut located at the end of the display.

14. Press on the Services shortcut option.

15. Find the Windows Error Reporting Service option located on the menu list.

16. You need to right-click on the Windows Error Reporting Service option.

17. Choose the properties option.

18. It is located on the prompt box.

19. After starting the service, you need to prevent it by pressing on the Stop option.

20. It is located in the center of the window.

21. Ensure that the option is given below the Startup type tab.

22. It is located in the service properties menu.

23. Verify the prompt box which will show after adjusting the type of the startup.

24. Press on the Start option

25. It is located at the end of the screen.

26. You will get the error text after pressing on the Start menu.

If you are getting the Windows Error Reporting Service on your system. Then you need to follow the steps mentioned below:

1. Go to the service properties menu.

2. Click on the Sign In option.

3. Press on the Browse option.

4. Below the “Enter the object name to select” checkbox.

5. Enter the name of the account.

6. Press on the Check Names option.

7. Wait until the name displays on the system.

8. Press on the OK button.

9. Enter the password in the password section.

• Updating the Windows to Its Latest Version

1. Start using the Windows and I keys together.

2. It will launch the Settings tab on the Windows computer.

3. Additionally, find the Settings tab through the text field given at the toolbar.

4. Find and go to the Update and Security column.

5. It is located in the settings tab.

6. You will find this in the Windows Update option.

7. Press on the Check for updates option given below the Update status.

8. Check if there is the latest version of Windows is available or not.

9. You need to start installing the Windows latest version.

Lily Johnsol is a self-professed security expert; He has been making the people aware of the security threats. His passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. He writes for Norton security products at norton.com/setup.

Source: http://my-nortonsetup.com/blog/how-to-fix-werfault-exe-application-error/

#Fix WerFault.exe Application Error #norton setup #norton.com/setup #www.norton.com/setup

0 notes

terabitweb · 6 years ago

Text

Original Post from McAfee Author: Debasish Mandal

Expert Rules are text-based custom rules that can be created in the Exploit Prevention policy in ENS Threat Prevention 10.5.3+. Expert Rules provide additional parameters and allow much more flexibility than the custom rules that can be created in the Access Protection policy. It also allows system administration to control / monitor an endpoint system at a very granular level. Expert rules do not rely on Use-Mode hooking; hence they have very minimal impact on a system’s performance. This blog is created as a basic guide to show our customers how to create them and which threats they can help block. Further detailed information can be found in the conclusion.

How Expert Rules work

The following sections show how to add Expert rules via EPO and ENS.

Adding an Expert Rule from EPO

1. Select System Tree | Subgroup (e.g.: ens_10.6.0) | Assigned Policies | Product (Endpoint Security Threat Prevention) | Exploit Prevention (My Default)

2. Navigate to Signatures and click on Add Expert Rule.

3. In the Rules section, complete the fields.

a. Select the severity and action for the rule. The severity provides information only; it has no select on the rule action.

b. Select the type of rule to create. The Rule content field is populated with the template for the selected type.

c. Change the template code to specify the behavior of the rule.

When you select a new class type, the code in the Rule content field is replaced with the corresponding template code. Endpoint Security assigns the ID number automatically, starting with 20000. Endpoint Security does not limit the number of Expert Rules you can create.

4. Save the rule, then save the settings.

5. Enforce the policy to a client system.

6. Validate the new Expert Rule on the client system.

Adding an Expert Rule directly at the Endpoint:

If we need to add an expert rule from EPO it will be pushed to all endpoints of an entire EPO “WORKGROUP”. There could be situations where expert rules are required to be applied in one/two systems or ENS systems which are not managed by EPO (non-corporate environment where ENS is installed from a standalone setup); in those cases, the expert rule must be added directly at the endpoint. Expert rules can be written and applied directly at the Endpoint system using McAfee Endpoint Security UI. Steps are below:

1. Open McAfee Endpoint Security. Go to Settings.

2. Go to Threat Prevention | Show Advanced.

3. Scroll Down to Expert Rule Section and then click on Add Expert Rule.

4. The expert rule compiler should pop up where an end user can directly write and compile expert rules and, upon compilation, enforce the rules to the system.

If there is no syntax error in the expert rule it can be applied in the system by clicking on the Enforce button. In case there is a syntax error, the details can be found in log file %ProgramData%McAfeeEndpoint SecurityLogsExploitPrevention_Debug.log

Testing the Rules

When new rules are created, they should first be tested in ‘Report’ mode so that the detections can be observed. When enough confidence in the rule has been gained, it can be turned to ‘Block’ mode.

Expert Rule Examples:

Basic Rule:

The following rule will detect an instance of cmd.exe creating any file at c:temp. Please note that cmd.exe might be run by any user and from any part of the system.

Rule {

Process {

Include OBJECT_NAME { -v “cmd.exe” }

}

Target {

Match FILE {

Include OBJECT_NAME { -v “c:\temp\**” }

Include -access “CREATE”

}

Rules which target specific malicious behavior:

The following rules can be created to help block specific malicious activity which is performed by various malware families and attack techniques.

Expert Rule to Block Remote Process Injection [MITRE Technique Process Injection T1055]:

Rule {

Process {

Include OBJECT_NAME { -v “**” }

Exclude OBJECT_NAME { -v “SYSTEM” }

Exclude OBJECT_NAME { -v “%windir%\System32\WBEM\WMIPRVSE.EXE” }

Exclude OBJECT_NAME { -v “%windir%\System32\CSRSS.EXE” }

Exclude OBJECT_NAME { -v “%windir%\System32\WERFAULT.EXE” }

Exclude OBJECT_NAME { -v “%windir%\System32\SERVICES.EXE” }

Exclude OBJECT_NAME { -v “*\GOOGLE\CHROME\APPLICATION\CHROME.EXE” }

}

Target {

Match THREAD {

Include OBJECT_NAME { -v “**” }

Exclude OBJECT_NAME { -v “**\MEMCOMPRESSION” }

Exclude OBJECT_NAME { -v “%windir%\System32\WERFAULT.EXE” }

Include -access “WRITE”

}

Expert Rule which prevents powershell.exe and powershell_ise.exe process from dumping credentials by accessing lsass.exe memory [ MITRE Technique Credential Dumping T1003 ]:

Rule {

Process {

Include OBJECT_NAME { -v “powershell.exe” }

Include OBJECT_NAME { -v “powershell_ise.exe” }

Exclude VTP_PRIVILEGES -type BITMASK { -v 0x8 }

}

Target {

Match PROCESS {

Include OBJECT_NAME { -v “lsass.exe” }

Include -nt_access “!0x10”

Exclude -nt_access “!0x400”

}

Expert Rule which prevents creation of a suspicious task (PowerShell script or batch file) using “SchTasks.exe” utility [MITRE Technique Scheduled Task T1053]:

Rule {

Process {

Include OBJECT_NAME { -v “SchTasks.exe” }

Include PROCESS_CMD_LINE { -v “*/Create*” }

}

Target {

Match PROCESS {

Include PROCESS_CMD_LINE { -v “**.bat**” }

}

Match PROCESS {

Include PROCESS_CMD_LINE { -v “**.ps1**” }

}

Expert Rule to prevent Start Up Entry Creation [ MITRE Technique Persistence T1060]:

Adversaries can use several techniques to maintain persistence through system reboots. One of the most popular techniques is creating entries in the Start Up folder. The following expert rule will prevent any process from creating files in the Start Up folder. Recently, the internet has witnessed a full-fledged exploit of a decade old WinRAR vulnerability (CVE-2018-20251) which can be exploited by dropping files in the Start Up directory. The following expert rule will also block such an attempt.

Rule {

Process {

Include OBJECT_NAME { -v ** }

}

Target {

Match FILE {

Include OBJECT_NAME { -v “**\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup\**” }

Include -access “CREATE WRITE”

}

Expert Rule which blocks JavaScript Execution within Adobe Reader:

Exploiting a client-side software vulnerability to gain an initial foothold in a network is not new [MITRE Technique T1203]. Adobe Reader is a very popular target because, like any other browser, it supports JavaScript which makes exploitation much easier. The following expert rule can be deployed in any network to prevent Adobe Reader from executing any kind of JavaScript.

Rule {

Process {

Include OBJECT_NAME { -v “AcroRd32.exe”}

}

Target {

Match SECTION {

Include OBJECT_NAME { -v “EScript.api” }

}

The table below shows how the above four Expert Rules line up in the Mitre Att&ck matrix.

Conclusion

There are many more rules which can be created within Exploit Prevention (part of McAfee’s ENS Threat Prevention) and they can be customized depending on the customer’s environment and requirements. For example, the Expert Rule which blocks JavaScript Execution within Adobe Reader will be of no use if an organization does not use “Adobe Reader” software. To fully utilize this feature, we recommend our customers read the following guides:

https://kc.mcafee.com/resources/sites/MCAFEE/content/live/PRODUCT_DOCUMENTATION/27000/PD27227/en_US/ens_1053_rg_ExpertRules_0-00_en-us.pdf

https://kc.mcafee.com/corporate/index?page=content&id=KB89677

Disclaimer: The expert rules used here as examples can cause a significant number of False Positives in some environments, hence we recommend those rules to be explicitly applied only in an environment where better visibility of above (or similar) events at granular level is required.

Acknowledgement:

The author would like to thank following colleagues for their help and inputs authoring this blog.

Oliver Devane

Abhishek Karnik

Cedric Cochin

The post Using Expert Rules in ENS 10.5.3 to Prevent Malicious Exploits appeared first on McAfee Blogs.

#gallery-0-5 { margin: auto; } #gallery-0-5 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 33%; } #gallery-0-5 img { border: 2px solid #cfcfcf; } #gallery-0-5 .gallery-caption { margin-left: 0; } /* see gallery_shortcode() in wp-includes/media.php */

Go to Source Author: Debasish Mandal Using Expert Rules in ENS 10.5.3 to Prevent Malicious Exploits Original Post from McAfee Author: Debasish Mandal Expert Rules are text-based custom rules that can be created in the Exploit Prevention policy in ENS Threat Prevention 10.5.3+.

#McAfee Security

0 notes

asithafan-blog · 6 years ago

Link

#windows 10

0 notes

desperate4friends · 7 years ago

Text

so svp isn’t working and i keep on getting a werfault.exe - application error and i’m really scared if i have a virus bc i have so much stuff and this computer doesn’t even belong to me smh

so . . .

yeah?

#d4f is cray #d4f rants

0 notes

thomasbdyer-blog · 8 years ago

Text

Exactly how To Safeguard Your System From DLL File Errors?

Even when you're taking utmost care of one's Computer and laptop, there stands probabilities for bugs, virus, and malicious application to attack your devices. Troubles like werfault.exe error, explorer.exe error and comparable other problems can impact your device at any point of time. How you can maintain your device secure from such threats? Paragraphs underneath shall extend you some efficient suggestions within this regard.

You need to create the habit to scan the device often

Because it gets stated that prevention is much better than to remedy, you have to create these habits which will stop the probabilities of malicious problems, affecting your method. The simplest however the mot efficient habit will probably be to scan the device often. This may get rid of the threats in the onset and stop its entry in to the systems This way, placing the minimum work and time, you are able to safeguard your device and information in the threats of probable perils like explorer.exe error and exe error.

Make sure that your device has got not viruses or Trojan applications prior to you scan the pc

Prior to you do the werfault scanning, you have to make sure that your method, do not have any viruses or Trojan applications. Scanning the device within the presence of those malicious components will harm the method additional.

Get DLL Completely Totally free Of Price

You are able to go for DLL download that you could do completely totally free of price. DLL will allow you to to repair all these problems and maintain your method and information secured in the threats from the probable perils. Customers who've utilized such applications, evaluation it on extremely higher notes and therefore, you are able to go for it with self-confidence.

Most importantly, you need to adopt the perfect usage that you simply will get within the user manual. Adopting these practices, you are able to safeguard your pc and retain its functionality towards the optimum level.

0 notes

saji7928 · 6 years ago

Text

How to fix Werfault.exe application error in Windows

Solution 1: Disable the Windows Error Reporting Service

Click Apply and Okay.

Solution 2: Update Drivers

Right-Click on the "This PC" and click on the Manage. Click "Device Manager" on the left sidebar. Find "Display adapter", expand it and you will see your graphic driver.

Right-click on your graphics driver and click on the update. Select "Search automatically for updated driver software".

Solution 3: Disable Your Antivirus Software

#app #windows10

0 notes