#hand reamer

[yancherrysoda]

The Faux Divine of Freedom

Took me long enough 🧍‍♂️

I had a lot of fun writing this! I will for sure cringe at this in like a month or two, but whatever. It was originally going to be 2.500 words; I don’t know how it turned out to be more than twice as long. The 2-month hiatus did me good lol

There’s a scene where Venti admires your lips; I really tried my best to describe them in a way that doesn’t go too much into detail since the reader is you, and your skin color might not be the same as mine, so if it sounds a little bit weird, it’s because of that.

This is part 2 of my yandere Venti oneshot series

Warnings: none

Word count: 6.273

Venti's feet made no sound on the stairs, his slender fingers gripping onto the banister with every step. His gaze was fixed ahead as he descended, unseeing but knowing where each stair ended and began. When he reached the bottom of the stairs, he slowly approached your bedroom door and raised one hand to knock lightly against it three times. When you did not answer, he slowly turned the doorknob and peeked inside, only to be greeted with an empty room. This was not a strange occurrence; when you first arrived here, you would spend the majority of your time locked in your bedroom, unwilling to talk or spend any time with him at all. However, lately, you opted to leave the house, preferring instead to spend time outside—and that is where he found you.

Stepping out of the house, his eyes immediately focused on your figure, curled up on a rock at the edge of the shore. Your legs were pressed tightly to your chest as your arms wrapped around them in a comforting hug. He cautiously approached you, taking in your presence before settling down not too far from you.

“Can we talk?” His voice was soothing, barely audible over the sound of the waves crashing against the shore.

You turned your head to look at him; your eyes narrowed and lips pressed tightly together as your body shook ever so slightly.

He tried scurrying closer to you, but you moved away sharply.

“Don’t touch me.”

Ignoring your warning, he tried once again to close the gap between the two of you, which made you grab him by the collar of his shirt as you reached into the pocket of your shorts, your hand wrapping around the cool metal handle of a violin peg reamer. With a swift motion, you withdrew it and pressed its tip against his neck. While it was not sharp, he was sure that with enough strength, you could break his skin if you were to put enough force behind it.

“I said don’t touch me,” you hissed, “Or I’ll drive this through your throat.”

“When did you get—” You tightened your grip around his collar, cutting off his words as you pressed the tool below his jawline, right where his head connected to the neck. “Yeah. Yeah, okay.”

You retreated the reamer back into your pocket and released him. His hands came up to rub at the tender spot where you had held him.

He didn’t try to move closer again.

The both of you sat there in silence, watching the waves come in and crash against some of the rocks before it was eventually broken by your rumbling stomach. You wrapped your arms around it, hoping to keep it still.

Venti’s eyes stayed fixed ahead. “I know what you’re trying to achieve by going on a hunger strike. Do you think that’s going to set you free?” He sighed. “Not only is it childish and very ineffective as a form of protest, but you could also potentially harm yourself, and I wouldn’t want that for you.” He eyed the peg reamer that you clutched tightly beside you. “You can also try and stab me as many times as you want; it’s not going to change anything.”

An awkward silence settled in between you both yet again. Venti felt the tension in the air, wishing he could break it but not knowing what to say or do. He thought about all the things he had wanted to discuss with you, and yet now he knew better than to breach those topics, as you were clearly not in the mood to talk to him.

“How long have I been here?” You asked after a while.

He shrugged. “A month, give or take.”

“My family, have they tried looking for me?”

Venti jolted, his face going pale as if he had stepped straight into a freezer. He lowered his head, fidgeting with his fingers. “I haven’t talked to them.”

You scoffed. “Of course you haven’t. What would you have told them anyway? That I ran away? They wouldn’t have believed you.” You paused for a moment, looking out into the sea. “And when I die, you can just disappear for a couple more centuries. By the time you decide to come back, nobody we knew will be there to tell you anything.” You looked back at him, your expression unreadable. “Sounds like the perfect plan, doesn’t it?” You lifted your legs from the ground, pressing them against your chest once again as you rested your chin on your knees. “I wish I never met you.”

His breath hitched. “Please don’t say that.” He leaned towards you, his hands pressing against the bumpy surface of the rock. “Haven’t you felt something for me?”

Your lip curled into a sneer. “Whether I felt something for you or not doesn’t matter anymore; thanks to this brilliant idea of yours, all of that is gone now.”

He knew this would not be easy, of course he did. You would not expect someone who had been taken away from their home and forced to be exiled until the end of their days to be happy about it, yet he could not help but feel how his heart broke at your words. Seeing you switch from showering him with love and affection straight to hostility tore him apart in ways he had not expected. Despite his best efforts these past few weeks, he could not seem to bridge the huge gap that had formed between the two of you.

But that was fine; he could rebuild the previous life he had with you. Sure, it would take time, but he was willing to wait; he knew how to do that very well.

He stood up, offering you a hand. “Care to join me inside?”

-

The two of you stepped through the door, his cape billowing out behind him like a sail in the wind. He removed it slowly, then hung it on the coat rack you had just at the entranceway. He carefully placed his hat next to it, then straightened it with a gentle touch of his fingers before turning to stand in front of you.

“I told you that you may get into my room any time you want, but not to take things out of it that could potentially be used to commit murder.” He extended his hand in your direction, his palm facing up. “The peg reamer, hand it to me.”

You took a couple of steps back, hiding the tool behind your back. “Huh?”

“I can’t risk you lashing out at me like during that kitchen knife incident the other day. I really don’t want to deal with that again.” He placed his free hand on his hip. “You might also hurt yourself with it.”

“I’m not a child.”

“You’ve been behaving like one lately, so hand it to me.” He moved his fingers slightly, indicating that you should hand over the reamer.

You slowly pulled it out from behind your back and placed it on his hand.

“Good, we’re making progress.”

You then stepped into the kitchen, a cozy space with white walls adorned with wooden wainscotting on the lower half—just like in every other part of the house. You took a seat at the old wooden table with your head propped on your hand, clearly not in the best of moods, as you carefully watched Venti walk towards the sink to wash his hands.

He hummed as he moved around the room—here plucking an onion from its little basket, there taking out apples from their box. Opening the fridge, he took out a piece of meat and some butter before searching through drawers filled with spoons and forks until he found a knife. Then, he took one of the hanging pans and placed it on the stove before adding the butter and some spices like pepper, garlic, and rosemary. While he waited for the butter to melt, he grabbed the knife and started cutting the apples.

“We’ve known each other for over two years now and you still haven’t told me what your favorite dish is,” he said, trying to make small talk as he chopped the apples. He peeked at you over his shoulder, then continued, “Maybe if you did, I could have cooked it for you.”

“I don’t have a favorite dish.”

Once the butter melted, he added the meat and waited for it to cook before finally adding in the sliced apples.

The aroma quickly filled the room, making your stomach rumble once again.

He stirred the pan. “Is that so? Then I guess I’ll have to make something that you would consider your favorite.”

You shifted your position, crossing one leg over the other as you leaned back against the chair. “But I did like the Buoyant Breeze at that restaurant we went to before,” you added.

Venti smiled at your response. “You have good taste.” He took a plate, scooped some of the food onto it, then walked over to you.

“Aren’t you going to eat as well?”

“I don’t need to, not as much as a human. I do get hungry, but hunger won’t kill me; it will only make my stomach hurt and cause some fatigue, which are symptoms I don’t like to deal with, and I doubt you do either so,” he set the dish down before taking a seat across from you, “I would advise you to stop this nonsense and eat when you have to,” he said, his voice coming out louder than he had intended.

You looked down at the plate and immediately recognized the dish as Northern Apple Stew.

Venti propped his chin on the back of his hands as his elbows rested on the surface of the table. He tilted his head to the side. “By the way, the dish you mentioned; Buoyant Breeze, did you know it’s Barbatos’?”

You stopped mid-bite. “That’s your—”

“Yep. I thought it would have been nice to cook something of my own and share it with other people. It took me many years to find the perfect ingredients.”

“It’s just carrots, potatoes, and onions,” you remarked before taking the first bite.

“Ah, but the secret lies in the combination of all three. Each has its own unique taste that complements the others.” He leaned in closer to you, his emerald eyes sparkling with enthusiasm as he spoke, “It’s a dish that represents my identity as Barbatos.”

You took a bite of the apple, tapping the fork thoughtfully against the edge of your plate. “I guess that’s why it’s so simple.”

He pretended to be deeply offended, but the corners of his mouth curled into a smirk. Crossing his arms, he leaned back against his chair. “How dare you say that? Do you not appreciate the taste of high-class cuisine when it’s presented before you?”

His fake indignation made you chuckle. “I do, I absolutely do. It’s incredibly delicious,” you said, “When it’s prepared by experienced chefs instead of you.”

“Oh ho! Alright, I get it,” he chuckled, running his hand through his dark hair. “How about you let me try my luck and cook it for you next time? You actually never tried eating it from the very Anemo Archon himself.”

"Sure,” you replied. It was the kind of 'sure' that meant 'yeah, right'. Your voice had a tinge of sarcasm to it, and he knew from your expression that you were not convinced.

“Then it’s settled. I’ll cook it for you tomorrow night,” he declared confidently.

The evening continued with Venti taking on a storyteller’s demeanor, regaling you with stories of his past exploits and sharing his deep-rooted philosophy on life.

At some point, he delved into the history of wine—how could he not—and how it came to be in Mondstadt. He described a certain mischievous wind spirit that took the form of a fox and fermented some apples under a negligent guard's care. When the guard awoke, he bit into one of those apples and, finding that he enjoyed the flavor, squeezed the sack that contained the apples to create wine.

His tales flowed like the finest wines, and as you finished your meal, he cleared the table and placed the dishes in the sink.

You got to your feet and headed to your room, with him walking right beside you like a persistent thorn in your side. You were about to open the door when you paused, hand still on the doorknob. “Why are you following me?”

“I don’t have anything to do.”

“Then why don’t you go find something?” As you stepped through the doorway, Venti placed his foot against the door, preventing it from being closed.

“I want to talk to you, like how we always did.”

“I don’t, so get out of my room.” You attempted to push him back and out of the room, but he caught both of your hands in his, holding them still. He gently shoved you inside, then kicked the door shut.

“It’s been a month, [Name], this can’t keep going on.”

You pulled yourself free from his grasp, turning to face him with an obviously fake smile. “You’re right, this can’t keep going on, so let me out.”

A deep, exasperated sigh escaped his lips. “We’ve talked about this.”

“Then I guess there’s nothing more to say.” You crossed your arms, the fake smile growing wider as he stepped closer.

“[Name], come on now; if there’s anything you’d want me to do, I’ll do it.”

“Didn’t I already tell you what I wanted?”

“That has nothing to do with setting you free.”

He carefully watched your movements as you wandered around your room; it remained the same as when you arrived here, only having a couple of extra things here and there like books, scented candles, and other trinkets. There were also three frames hanging on one of the walls, perfectly aligned one after another. Originally, Venti had placed photos of the two of you from your previous adventures in them, but due to the rage you felt towards him for what he had done, you took them out of the frames and tore them into little pieces.

“Is there any way you could help me communicate with my family? To let them know that I’m alive and well?”

Venti exhaled heavily, reaching out to rub the back of his neck. “That’s going to be a pain in the ass.”

“The least you could do is grant me this request,” you said. “Or do I have to pray to you?”

He chuckled. “That would be nice.”

“Fuck off.”

He crossed his arms over his chest. “Your temper sure has gotten worse over your stay here.” He stared out the window, turning the thought over in his mind. If he agreed to let you contact your parents, he would have to talk to them first, which would be a pretty awkward experience. Of course, he could not allow you to have direct contact with them, so it would have to be done through notes. “I guess I could help you, but only if you agree to do something.” After all, you would not pass on such an opportunity, right? He might as well get something from you in return.

“Agree to do something? Do you think you’re in the right to make any demands of me?”

Venti smiled in amusement, his lips curling up into a grin. “I just want you to let me hug you; it’s a small price to pay for what you’re asking me for.”

You turned your head away from him. “This is something I would call a pain in the ass, and not what I asked for.” You looked back at him. “Fine.”

He giggled, taking a step towards you. “There’s one thing I forgot to mention, though. You see, I’m a little bit tired, so if you could allow me to hold you as you…” he leaned in slowly, “Sit on my lap, that would make me very happy.”

“You’re delusional.”

“Your request is rather complicated, as I’ll have to think of something to tell your family about your whereabouts.” He placed a hand over his heart as he said in a pitiful tone of voice, “Not to mention the humiliation I’ll have to go through if I did that.”

“Aren’t there any other options?”

“Oh, there sure are, but I doubt you’ll say yes.”

You uttered a string of curses under your breath. “Whatever.” You raised an eyebrow at him, “What are you tired of anyway? Doing nothing all day just like how you do nothing as the patron God of Mondstadt?”

It was a fact that he had not been very active in terms of leadership in his nation over the past centuries, but he had never given up on it. If the day ever came when his people would need him—no matter what shape or form the situation may take—he will always be there to step in.

“What’s with that sassy attitude?”

“What’s with that sassy attitude?” You mimicked his words in a mocking tone. “Oh, I’m very sorry! I didn’t know I had to exhibit a good attitude towards my kidnapper!” You grabbed him by the shoulders and, with an effortless motion, pushed him onto a nearby chair, planting yourself on his lap. You placed a hand over his chest, pushing him further into it. “Tell me, oh great God of Freedom—if I dare call you so myself—doth this please you?”

Your actions caught him off guard, and he almost missed his grip on the chair. He looked slightly dazed by your boldness but quickly recovered.

“Huh? Oh, your switch in behavior, or you sitting on my lap?” He let out a hearty chuckle, his shoulders bouncing slightly. He rested his hands on your hips to help balance you. “Either way, yes, very much so.”

Your jaw was visibly clenched, and your throat bobbed as you gulped. It looked as if you were about to jump at his throat right then and there. Your hand got ahold of the back of the chair as you leaned in, “We’re not lovers; we’re not friends either, not anymore, so don’t talk to me as if our relationship was still the same.”

Venti's gaze met yours with seriousness, his brows drawn together. “I get it.”

Carefully, you slipped further away from him until you were nearly perched on his lap.

“I can’t hug you when you’re that far away.”

“Sucks.”

Venti dropped his legs so suddenly and sharply that you almost slipped off him, which made you quickly react and reach out to wrap your arms around his neck to steady yourself.

He gave you a light kiss on your ear before whispering, “That’s more like it.”

You quickly pulled yourself away from him. “You’re a little shit, you know that?”

He stuck out his tongue, his eyes narrowing cheekily.

You dug your fingers into his shoulders.

“Ow ow ow ow! Alright, I’m very sorry!” He moved one of his hands behind his back, his fingers subtly crossed. “I won’t do anything like that again, I promise.”

Apologies exchanged, Venti’s hands shook ever so slightly as he wrapped them around your frame. The second he nested his head on your chest, it felt like his body had found its home. Nothing around him mattered; his worries and cares all seemed to dissolve away the moment he touched you. He closed his eyes and sighed, listening to your heartbeat. It thumped strong and steady, with a rhythm that could beat on forever—or so he wished.

“I missed holding you like this,” he uttered.

This was the only time you let him even come an inch closer to you; normally you would avoid or scowl at him. He understood that his actions disgusted you, yet he won’t lie and say that the past month has not been excruciating. The change in your behavior reminded him of a human he considered his friend long ago—a red-headed warrior that came to live in Old Mondstadt under Decarabian's dictatorial rule. When Decarabian was defeated and Venti ascended to godhood under the name of Barbatos, for reasons he has yet to comprehend, the warrior then turned his back on Venti.

He nuzzled closer to you. “I know you don’t understand why I did this to you, and I have a feeling that you never will, but let me at least explain myself.” He drew a breath, releasing it slowly. “The life of an immortal is a dreadfully lonely one, for it is marked by an eternity of watching the ones you hold dear grow old and leave this world, drifting away like echoes of a song in the breeze while you remain unchanged,” he began, his voice carrying an unbearable weight to it, one that endured centuries of loneliness and sorrow. “Not being able to experience the love you desire so much for such a long time can be really hard, and it can make you do unspeakable things, desperate to find someone who can stay with you for more than just a fraction of time.”

Your hands balled into fists. “So you decided to restrict my freedom because you wanted to be loved? You’ve been alive for so long, yet you never learned how to properly get into a relationship?”

He pulled away to have a proper look at your face. “When you say it like that, you make me sound like a loser.”

“Probably because you are.”

“How rude.”

You huffed. “Don’t you have any friends?”

His face softened. “Yes, I do have friends. But if you’re asking me about people who have had a significant impact on my life like you did, then no—they have long since perished.” He tugged at the corner of his lips in an attempt to hide the sadness that had started spreading across his features. “It’s quite tragic if you think about it; being forced to live for eternity and not being able to form meaningful connections with people because they eventually pass away. You’d cry day and night, wishing you could have done something to make them stay by your side.” He gently reached out, brushing a stray strand of hair away from your face. “You’d think I would have gotten used to it by now, but it keeps hitting me like a wave every single time. Oh, they died, too.” He laughed wistfully. “Why? Why am I alone again?”

You didn’t say anything.

“You’re a very kind person, one that I am very fortunate to have met. I’ve never experienced the warmth and affection that you’ve shown me. I never knew what it felt like to be loved in such a way before.” He smiled sheepishly. “I wanted to be with you, [Name], but I didn’t know what else to do. All I knew was that the only way for me to prevent you from potentially falling in love with someone else was to bind you to me.”

“But that’s not how love works; it cannot be forced; it has to come from both people’s hearts willingly.” Placing your hands on his shoulders, you asked, “What did you do all this time that you were alive? Did you not learn anything?”

He gently brushed the back of his fingers against your cheek. “I learned that love is the most precious thing a person can have. As an Archon; immortality and power mean nothing; at least to me, they don’t.” His eyes softened, and he continued, “Of course, I don’t expect you to forgive me for what I’ve done—I can’t even forgive myself—but I hope that you at least understand my struggles.”

You glanced out the window; the sun was setting and the night sky was beginning to blanket the island in darkness. “Have you done something like this to anyone before?”

Venti’s eyes widened slightly at your question, and for a moment he said nothing. He looked around your room, seeming to take in his surroundings anew before focusing back on you. “No,” he replied simply. “I never clicked with anyone before.” He pulled you closer to him. “I did want to have a partner at some point—someone who I would love and who would love me in return—but I never so thought of doing this to anyone.” He cleared his throat. “I don’t really have any experience in… courting someone. So I did plenty of research on how to show the person I love that I had feelings for them by doing things like holding hands, hugging, giving presents, and such.”

To say that Venti had no experience with being in a relationship was an understatement. He had seen how others treated their love interests and was able to pick up on some patterns—the Windblume Festival was a particularly great time to learn about human love—but he also wanted to make sure he did not screw things up, so he took the time to read up on what he should do and how he should act. Sure, he was a master at writing love poems, but he was no expert when it came to managing his own emotions.

When he first began to develop feelings for you, his first thought was to make you a gift. It was the first thing he tried to do for his departed friend—to gift him the feather of a bird. So would gifting you a bunch of flowers show you how much Venti valued your presence in his life? Would cooking for you or taking you on dates to Windrise make you understand that he viewed you as more than just a friend? Would showing you that he was capable of protecting you make you less likely to push him away if his limits were tested and he had to take drastic measures? Guess not.

You raised an eyebrow in response. “Did that research also include kidnapping people?”

Venti looked away, quickly covering his mouth with one hand in an attempt to stifle the choked laughter that threatened to escape.

“Not funny.”

“It is kinda funny.” He looked back at you, checking your expression before quickly saying, “I mean, the way you said it, not the situation itself.” He shifted his body slightly. “I assumed you got my intentions, and that’s why you treated me with such kindness.”

“I treat everyone with kindness.”

“I’m sure I was the most, and that's why I thought that you wouldn’t be so opposed to what I did and would at least try and understand the position I was in.” He sighed. “Anyway. I actually took some time to plan this all out, but I ended up jumping into action way too soon, which is also the reason why I didn’t come up with an excuse to tell your family as to what could have happened to you. I admit I acted prematurely. I wish I didn’t let my intrusive thoughts win,” he paused and then added, “Tell me, did I do something against your will during your stay here?”

“No,” you admitted. “Because if you did, you would have been six feet underground by now.”

“Oh wow! That has got to be the best comeback I heard from you so far. Who did you learn this from?”

“He’s sitting right in front of me.”

Venti giggled. “Did you get anything else from me?”

“Not your insanity that’s for sure.”

“Do you think I’m too far gone? My ideals are still freedom, even after what I’ve done, that’s why I give you the freedom to go anywhere you want—within this realm, that is. If I were completely out of it, I would have kept you chained, but I don’t.”

“Am I supposed to be grateful?”

“I would be.”

You shook your head in disbelief. “You’re in fact far gone; you just don’t realize that.”

As much as he would have loved to put you in your place for your cheeky remark earlier, he had to control himself; you were still in the early stages of getting used to your new life.

His grip on your thighs tightened, a physical reminder of the power he held over you. “Hmph. Come to think of it, maybe I should have kept you chained when I brought you to the tower; a slip on my part,” he mused. “I almost got a heart attack when I came back and discovered you weren’t there.”

“Fuck you.”

Venti tucked a piece of hair behind your ear, his fingertips gliding against your cheek. “Don’t you think it’s a little bit early for that?” He giggled. “You know, judging our relationship before this whole situation, I thought you’d stay to listen to what else I had to say instead of doing your silly little escape. I really thought you’d have some compassion.”

A loud slap landed on his cheek, its sharp sound reverberating through the air. His head whipped to the side, and he felt the heat radiating off of his cheek like an open flame.

“Compassion?” you said through gritted teeth. “You made me think I was safe with you, and then you drugged and kidnapped me!” You lifted your hand to smack him again, but he was quick to get ahold of it. “You selfish piece of shit!” Your breath caught in your throat as tears began to roll down your cheeks. “When you took me to that tower, I didn’t fully register your motives, even after you explained them to me. All I thought was; what did I do wrong to deserve this? To be locked away?”

His heart tugged at the sight of you in so much distress; he tried cupping your face, but you knocked his hands away.

“Is this what I get for being nice to you?” You quickly swiped away the tears with the back of your hands. “You don’t deserve to be called the God of Freedom.”

“Do you really think I was going to let go now that I finally found the person I was looking for for so long?” He didn’t wait for you to answer; instead, he once again brought his hand up and gently wiped away your tears. “[Name], I wanted to be loved, too.” He wrapped his arms around you, holding you in a tight embrace. “I love you, so much,” he whispered softly.

You hiccuped a few times as the tears kept rolling down your cheeks. “I’m not saying you don’t love me, but trapping me here isn’t a good way of showing that.”

“You’ve been very distant with me, so it has been difficult to do that.” He leaned back, taking your hands in his. “Could you give me a chance? After all, I told you I’d make you happy, didn’t I?”

You hesitated, wavering between one state of thinking and another. “How are you going to do that?”

The answer was obvious, but he felt like teasing you.

“When two people love each other…”

You quickly covered his mouth with your hand, accidentally snorting a laugh. “I wish you’d shut up.”

That was not the real answer—at least not at this point in time.

His eyes looked intently into yours as though he were trying to hold onto the sound of that laugh forever, not sure when he would ever hear it again. He grabbed the hand that covered his mouth, brushing his lips against your fingers before kissing them one after the other. “I wish you’d make me.”

“Stop talking like that.”

He couldn’t help but chuckle. “Sorry, I was just trying to make you laugh.”

“That was supposed to make me laugh?”

“You just did.”

“I said shut up or I’ll end you.”

He laughed again. “You seem to forget I’m not human, and as such, there’s no way for you to get rid of me. But hey, there are other ways to stop me from talking,” he said as he pointed at his lips with a mischievous glint in his eye.

You stared at him with a blank expression on your face. “I’m done with the conversation.” You attempted to get off him, but he placed his hands on your waist, holding you still.

“Where are you going? We still have got to discuss a few things. First,” he said, holding up a finger, “No more hunger strikes. I don’t want you lying to me and saying that you ate when you didn’t. It’s painfully obvious anyway.” He grabbed your chin, directing you to look at him. His expression was stern, but it also had a hint of concern. “Did you hear me?”

“I wasn’t trying to hide it. I thought that you’d get tired of dealing with me soon enough and would end up setting me free. You can still do that, you know, I won’t tell anybody that their God has gone insane and went against his own beliefs by kidnapping a person.”

“How tempting.”

You huffed. “Why does the God of Freedom need to set rules anyway? What happened to go forth and establish a city of freedom without rule?”

Venti clasped his hands together, his eyes lighting up. “You’re such a devotee!” He giggled. “I totally understand what you mean, though, but sometimes rules are necessary; you humans just don’t seem to know how to behave properly sometimes.” His mind drifted back to the aristocracy that had taken over Mondstadt shortly after Decarabian's fall, ruling the region with an iron fist for 1.600 years. They went from being noble protectors to tyrannical rulers whose influence was spread far and wide.

“Ironic.”

“Alright, second rule; stop trying to kill me. Do you know how creepy it is to wake up in the middle of the night to see you standing beside my bed, holding a knife above my throat?”

“Mr. Big Anemo God Barbatos fears he might get his throat slit?”

“Hey! That won’t kill me alright, but I still feel pain, and you know that.”

“Oh, I sure know.”

“So?”

You hummed in thought, a yawn escaping as your exhaustion began to catch up with you.

“[Name]…”

“Yeah, okay, whatever.” Another yawn interrupted your reply.

“You look tired.” He smiled. “Why not rest your head on my shoulder?” He cocked his head to the side. “Or does your pride get in the way?”

“Keep pushing your limits; I don’t mind slapping you a second time.”

He wagged his finger from side to side. “One of these days I’ll have to properly punish you.”

There it was again; the clenching of your jaw and irritated swallow.

Defeated, you laid your head on his shoulder.

As soon as your body touched him again, Venti's breath hitched, and his grip on your waist tightened slightly. He felt his face heat up as his braids radiated a dim teal hue, resembling a flickering lightbulb. He looked into your eyes, his expression softening. “Giving up?” He sighed. “Oh, what am I gonna do with you…” He blew out a breath, pushing a stray lock of hair away from his eyes. “You sure have given me quite some trouble.”

Gradually, he began rambling about various random topics, like a song he performed on that specific day of autumn where he got plenty of tips and even a free bottle of wine. He recounted a funny incident where he had tried to dance on one of the tables of the tavern and then broke it, which prompted Diluc to kick him out of the building and leave him standing out in the rain like a wet rat.

As he spoke, he did not notice that your breathing had slowed and your eyes were gently closed. With a smile on his face, Venti finally fell silent. He looked down to find you asleep on his shoulder. “Did my speech bore you?” A soft chuckle escaped his lips. “You should have spent some time with a friend of mine; that old blockhead keeps on talking and talking about the same stuff every time!” He felt a sudden sting on his cheek. He reached up to touch it, but quickly flinched away. “I’m gonna have to use some ice on this…”

Venti slowly and gently stood up from the chair, cradling you in his arms, then walked towards the bed, careful not to make too much noise so as not to wake you up. He laid your head on the pillow and then tucked a blanket around your body, making sure it was snugly fit.

His gaze fell on your lips; they were slightly parted as the softest sighs left your mouth. They looked full and inviting, with just the slightest hint of a curve inwards at the corners. The hint of color made them all the more attractive—a hue that looked as if it had been painted on with care. He brushed his thumb against your bottom lip, slightly tracing it as his mind replayed his previous words; ‘I wish you’d make me.’

He chuckled to himself. “Maybe another time.” He leaned closer, his hand tenderly enveloping yours as he placed a light kiss on your forehead. “I love you.”

He watched you with bated breath, wondering if you would stir, if your features would relax or tense. He waited for a moment, for any sign, even the subtlest, that his heartfelt confession had reached you, but you were still just as peacefully dreaming as when he laid you on that bed.

[wikirobot]

Spent the last week slowly building another stool, this time completely by hand. This came out of my last post where there was a discussion about how hard it would be. Overall it wasn't that much harder then the first one. Only arduous part was ripping the legs out of the stock, and part of that was my rip saw needed sharpening.

I think it turned out pretty great, but my leg placement makes it look a bit wonky. The grain pattern on the seat is nice though.

Full pictures and process below the break

Step one find (or glue up) a large slab of wood, this one was sitting out in the garage. It's a piece of Ash.

Step two cut off part of the slab for the seat. (Also I still haven't made a proper handle for my vice. It's fine. It's only been 6 months)

Step three mark and cut the corners to make an octagon. I tried cutting a couple as I did in the picture, and a couple across the face. Both ways worked.

End up with a nice octagon, now plane it smooth

Then take the remaining bit of the original slab and rip it into three legs. (Forgetting to take a picture is optional.) Also take a break half way through and sharpen your saw. It makes the second half a lot easier

Finally end up with three legs, turn those legs into octagons and shave down the ends, My previous posts have a bit more info on that process.

Glue some legs on, and you have yourself a stool. All it needs now is some bits cut off, some sanding, and it’s ready for some shellac.

These were all the tools I used. (Yes I did cheat a bit with the hand drill, but I don’t have the right bits to put into my brace). Tools: 1. Marking Gauge (Could use a combination square as well) 2. Compass 3. 5/8th drill Bit, and 5/8th reamer, 5/8th tenon cutter. 4. Power Drill 5. Jack Plane 6. Block Plane 7. Spokeshave 8. Rip Saw 9. Crosscut saw 10. Bevel Gauge.

[autobotmedic]

🔥? whichever of my muse(s) you feel inspired to do

appearance judging

@luminantreverie & @atlas-ordained

Lovingly, "Absolutely."

@regalium-gravitas

Weakly quietly, "Yes."

@reforged-lionheart

He makes a 'so-so' motion with one hand.

@conflagratedheart

"Not really, but I do think your frame is intriguing due to the age of its design."

@aeon-eiulatus

"No, but you are adorable."

@rivenedwaltz

Reamer shoves Ratchet aside to declare, "The most attractive!"

[thelastdiamondpiratealchemist]

Big Brave Bravern

Superbowl Confessions.

Braven x Female SO

“The Superbowl?” Isami tilted his head to the side, and Lewis Smith and Arial exchanged glances.

“Yeah, it’s the biggest football game of the year,” Arial replied, curling her lips into a bright smile,

“It’s like a national holiday in the United States.”

Isami’s brow furrowed slightly, his confusion evident; Bravern walked over to his massive body, shaking the ground as he approached the small group of humans.

“What is football?” Bravern asked, placing his hands on his hips. Isami, Lewis, and Arial exchanged glances, trying to find the best way to explain the sport to the towering Bravern.

“Well, football is a game played between two teams of eleven players each,” Isami began, echoing through the spacious room. “The goal is to score points by carrying or passing the ball into the opposing team’s end zone.”

Bravern’s brow creased slightly as he absorbed Isami’s words. “And how do you score points?” he inquired, his deep voice rumbling.

“You can score points in a few ways,” Arial said, her enthusiasm evident. “You can score a touchdown by carrying the ball into the end zone, or you can kick a field goal by kicking the ball through the goalposts.”

Bravern nodded slowly, eyes scanning the group as he processed the information.

“I see,” he said thoughtfully. “So, it’s a game of strategy and skill.”

“Exactly,” Lewis agreed, a grin spreading across his face. “And it’s also a lot of fun to watch.”

Isami shrugged his shoulders; he leaned back on his head and let out a sigh.

“I’ve never seen a match, Bravern; it’s an American thing.” He explained. Arial clapped her hands together, making Isami flinch.

“Well, then we’ll have a party!” She pumps her fist, “We’re talking food, games, trivia!”

Bravern’s eyes widened with excitement as Arial’s words painted a vibrant picture in his mind.

“A party?” he repeated, his voice echoing through the room. “That sounds delightful!”

“I don’t know…” Isami hesitated, “Parties aren’t really my thing…”

Lewis’s smile grew more expansive, and she wrapped his arm around the Japanese man’s shoulder.

“Oh, come on, Isami,” Lewis chuckled, playfully nudging his friend. “It’ll be a great time. Trust me.”

Isami sighed, knowing he couldn’t resist Lewis’ infectious enthusiasm. “Fine,” he relented, a hint of a smile tugging at the corners of his lips. “But I’m not making any promises.”

Arial squealed with delight, her eyes sparkling with excitement.

“This is going to be the best Superbowl party ever!” she declared. Bravern agreed, pumping his fist in the air following Arial’s gesture.

“Yes, I’m very excited to see more human and earth cultures!” He shouted, his voice booming, making everyone flinch slightly.

The day of the Superbowl arrived: Arial and Lewis decorated a wear house reamers and balloons in vibrant colors adorned the walls. At the same time, tables were laden with various delectable snacks and refreshments.

As the guests began to arrive, the atmosphere crackled with excitement. Friends and colleagues from Isami’s dorm and some of Arial’s family members filled the warehouse, their laughter and chatter creating a symphony of joy.

Bravern set up a large projector to show the game on the massive smooth wall, transforming the warehouse into a makeshift stadium. The room fell silent as the players took to the field, their helmets gleaming under the bright lights.

Bravern sits on the ground, watching Arial from the corner of his optic. Something about her made him feel…

Different.

It wasn’t just her physical beauty, although she was undeniably attractive. It was her energy, her passion, her infectious enthusiasm. She made him feel alive in a way he had never felt before.

He felt himself freeze as he glanced back at her; a smile printed across her pink lips made his body slightly overheat.

“Who are you watching, Bravern?” Asked Lewis, “The game or Arial?”

Bravern’s massive frame shifted uncomfortably under Lewis’ teasing gaze.

“I’m watching the game, of course.” He cleared his throat, his optics darting back to the game.

“Sure, you are, big guy.” Lewis chuckled, nudging him playfully.

Bravern couldn’t help but feel flustered. He had never experienced these strange, exhilarating emotions before. He stole another glance at Arial, who was engrossed in the game, her eyes sparkling excitedly.

As the game progressed, Bravern found himself cheering along with the crowd. He was amazed by the athleticism and skill of the players, the strategic plays, and the sheer intensity of the competition. He began to understand why this event was so beloved by humans.

However, he couldn’t deny the pull he felt towards Arial. Every time she laughed, every time she gasped in surprise, every time she leaned forward in anticipation, his heart pounded in his chest. He longed to reach and touch her, to feel her soft skin against his.

Halftime arrived, and the crowd cheered as the performers took to the stage. Bravern watched in awe as they danced and sang, creating a mesmerizing and exhilarating spectacle.

But his attention kept drifting back to Arial. She was standing close to him, her body swaying to the music. He could smell her light, floral scent that intoxicated him. He wanted to wrap his arms around her and pull her close.

“Bravern, are you having fun?” Arial questioned, making his heart freeze for a moment.

“Yes, I am,” Bravern replied honestly, his voice slightly husky. “The game is exciting, and the halftime show is spectacular.”

Arial smiled, her eyes crinkling at the corners.

“I’m glad you’re enjoying it,” she said. “This is one of my favorite events of the year.”

Bravern nodded, unable to take his eyes off her. He felt a strange urge to tell her how he felt, but he wasn’t sure how she would react. He had never expressed his emotions well, especially to someone he cared about.

The second half of the game began, and Bravern needed help to focus on the action on the field. His mind kept wandering back to Arial, and he couldn’t shake the feeling that he needed to say something to her.

Finally, during a lull in the game, he turned to her and took a deep breath. “Arial,” he said, his voice trembling slightly, “there’s something I need to tell you.”

Arial turned to him, her eyes wide with curiosity.

“What is it, Bravern?” she asked. Bravern hesitated for a moment, then blurted out,

“I like you, Arial. A lot!”

Arial’s eyes widened even further, and a slow smile spread.

“You do?” she asked.

Bravern nodded, his heart pounding in his chest. “Yes, I do,” he said. “I’ve liked you for a while now, but I was afraid to say anything.”

Arial laughed softly, a beautiful sound that made Bravern’s heart melt.

“You don’t have to be afraid, Bravern,” she said. “I like you too.”

Bravern’s eyes lit up with joy. He leaned forward and gently took Arial’s hand in his.

“Really?” he asked.

Arial nodded, her smile growing wider.

“Really,” she said, kissing his cheek, sending shivers down Bravern’s massive frame. He felt a surge of happiness and relief wash over him. He didn’t have to hide his feelings or worry about rejection for once. Arial felt the same way.

[itgr]

OH I LOVE THIS SCENE SO MUCH. Basically confirms and reiterates everything I've been suspecting. Reamer has no real friends or connections and it's eventually going to eat him alive. Brek was so based. Love him for consistently calling out his full bullshit and their friendship is disingenuous but like, it's sad because it could've been genuine if Reamer didn't suck. Like Brek could understand how Reamer felt and you can tell maybe if he had just opened up to his friends and been vulnerable and dealt with his insecurities and borderline abusive relationship with his mother in a healthier way, he could still have friends and support system, except he literally couldn't help himself. He HAD to abuse those friendships. He HAD to have the upper hand (which is what he was taught to value, control and power). He couldn't even just have empty and follow friendships, no, he HAD to exploit them 😭 ough. He is so tragic to me and everything that is coming to him is 100% his fault. Poor Brek tbh. I hope he has nice things and gets on better terms with Tiraa

[sanyparts]

ODT004769554 Engine Left Front Support for SANY machinery

ODT004769554 Engine Left Front Support SANY spare parts Mail:imeppon@gmail.com 10031573 Plate 10477486 油缸KTB1.3-1 168899000308 flange bolt 160102040050A008 Thermostat Assembly 10056577L SANY PARTS 10603981 Control console assembly 10014381 Fixation block 9181204000146 四氟垫片DN200PN10 δ=5 67331270938 8 pin connector SPEEA-0687M AMP776280-1 22032358 Stop plate3 AWPHI-0043B 10214276 底板SFY758.6.1.2-2 10275714 SANY PARTS 21009035 Tube 10475601 Steel tube assembly 168899003490A Pressure Sensor 9190314000216 电动阀门直行程DN20-WCB衬F46 918083000022 leaf spring third leaf 10667888 SANY PARTS 10446173 Cover Plate 523304 LEVER ARM 501926 SANY PARTS 61019676 Flat cable 21002869 Fitting, Elbow 10105982 从动轮盖板J2H.2.13 24916273 Mirror plate 10174869 SANY PARTS 59008837 PPR内丝直接25×20 10445487M 缸底锻坯ZXQAY220.2.12.1-1(M) 918071300019 螺杆式空压机SG-18A 660V/50HZ 10100047 SANY PARTS 24905111 SANY PARTS 10268600B SANY PARTS 22008826 Shaft clamp plate W560-04-00-A 22021215 Screw mounting assembly SPKMG-00166A 922011000018A Cylinder 10116507 Cushion 21025981 Base, Bearing 160102310003B080 Rubber Ring 59000161 / 21006070 Convex plate 10055128 SANY PARTS 160102080029B019 Fuel Pump Mounting Part 61005544R Right boom cylinder 160102150020A133 Screw Hex Flange Head Cap 10015131 handle of hand pump 921070600004A SYYT-20YT 919090300055A F夹UP605M* 61028691 Gasket 22053764 Block assembly SPPCH040KA50 21083551 SANY PARTS 180399000029A Connecting piece 160507060107A Adblue Pump 10493982 SANY PARTS 9181218000059 external friction plate 10189819 Sleeve 61005250 Expansion Io 918080800030 磁翻板液位计DN25-304衬四氟-800mm 10113089 SANY PARTS 10004149L - 22010643 HIG 288 HIG288 180102090322A Milling Blade 160102030072A414 Container Door Lock 24902565 SANY PARTS 160102230002A661 Lubricating Oil Pump 180103030541A Turnable Bits 10463843 / 10182004 Battery switch connectionYL25C.5.12 180106030191A Module Boring Tool 10586503M 铲板槽帮铸坯TBGB.04-2(M) 10169108 SANY PARTS imeppon@gmail.com 21029271 SANY PARTS 10129212 SANY PARTS 10530375 SANY PARTS 24901604 Diagonal riser 181399000464A Other Steel Plates imeppon@gmail.com 10080377 Left mirror plate 10207090 煤安标志牌ZB1.13.9-6 10205707 SY230C9C excavator body 67324073048 End cover SPEV-0475C /EV-4462 10432901 右前支撑组件FC3.1.5 24907196 SANY PARTS 10058798 Front cover plate of transformer chamber 180104080018A Reamer Tools 180299000144A Teflon tapy 00001651L 板(11)料坯QY26A.1.1.1.1-12(L) 10131862 SANY PARTS 160101140004A234 Bolt, Socket Head Cap 51001203 NPG-36 碳粉 10490662 JM11.2.2.6-1 10194802 Asphalt steelyard Connection 530975 A22134X SEAL KIT 22021327 SPS10000 standard mounting kits SP300-ST 21036155 Pipe 10488060L SANY PARTS 22050188 Side plate SP108MT0401 22024369 Truck mounted crane SPS30000_DP_41A 920060800086A Reel filter element 160102050035B076 Performance Part 533922 SY335 Maintenance Manual DE 21019443 Copper sleeve 67310989994 Lift cyclinder SPUP-0200A Boom110-70-514 22044374 Welding Pipe SPHLR-1286 /HLR19817 920032100015A intelligent eyes 160102130019A485 Single Wire Seal 10055361 beam 10060461 Door upper foldout GTB9.10.7 180109010390A Full Type Tool Holder System 22047995 Strengthen Plate SPPBA003-A2110 10108370 Right guide key 61026722 Plunger pump 59009164 SANY PARTS 10165804 SANY PARTS 10268563 Bracket 10647566 133直管2.55mBCB66Ⅱ.3.2.4 530879 53131-0001 BEARING CAR ASSY 160801010315A005 Shunt Tank 507544 SANY PARTS 10203998 Crossbeam 59010821 SYT63塔式起重机零部件图册 10432620 - 10235401P Wear Parts 61013477 从齿2 61011654 Turn The Shaft 10680907 斜梁Z11.11 21085398 16 head-changeable torque spanner 10035822Ｂ 主弦管SH350C.6.2-2（料坯） 22009543 Lifting Chart of SPS10500 SPEB-0227 10691145 SANY PARTS 22051380 Peri frame 6 SPPCH034-A21001 21029978 SANY PARTS 10035433L 立板(2)料坯SDJ90.2.1-17(L) 528674 SANY PARTS 502592A TILTROTATOR PROP+ W/ HOSES SY215/225 9190314000020 调节阀-气动直行程DN20-WCB衬F46 160603010088A Oil-water Separator 10208942L 连接板料坯HQC5290JB.26B.2-1(L) 10475829 SANY PARTS 10262410 SANY PARTS imeppon@gmail.com 22025078 Crane ZJ00262 10058813 main controller installation plate GTB9. 24901085 Piston Rod Component 22020020 AWPSPHA-0845 180999000039A CPVC胶水714TM 10079239 Hydraulic piping diagram of chassis 10486196 SANY PARTS 22020478 Plate SPA202G-1-2001 10447626 Piston Rod Assem. 51003723 SANY PARTS 168899002922A Nipple 10488960 steel tube assem. 10455099 堵头SY5412B.6.6.5-2 21022898 弯管Q400-3002 7201 00 22051063 Pin shaft SPHI-0578 180110030307A Screw 21036672 Plate 10648904 SANY PARTS 10079135 WJ10EFB Front carriage 21012739 Screw Q400.52.1-20Grade 10.9 21028979 Reinforced plate 160801030115A001 Net 920040300006A 液压站SHD-204B 上海七洋 921072900012A PHTJG 22062696 1st boom section SP408T06-A 61027263 no name 61018666J1 electric drawing 10043124 B61 Components of cylinder drum 10214147 SANY PARTS 160801090070A Shroud, Fan 24912093 Flange 61001579 Scr Catalytic Silencer 10083357 Angle stay ⅠRC1.4.2.1.4-1 10661671 Sealing plate 180103021249B Solid Carbid Bits 10079390344 SCC500 Crawler Crane body 21083934 SANY PARTS 24902677 Handle 67340727178 Fitting SPTM-0515 EA1266M 10105481 Left Board 10040516 左边梁料坯HZS120G.4.1-1L 24915032 Base Plate 22019995 TUBE CROSS AWPSPHA-0826 10182008 Battery Motor connection Wire 10050247 Brattice 181399000543A Rebar Sleeve 10641940 SANY PARTS 160102030072A108 Generator Set Controller 920071600040A Nut 10485979 assembly of platform wiring harness Ⅲ 10449106 给水管接头三SP120.1.15LS 921031900020A 手扳葫芦2T6M 10100140 SANY PARTS 21024620 Seesaw switch JK931-0027.43 yellow 61023381 die 10591137 SANY PARTS Read the full article

[craftwithlathe16]

Mastering the Art of Machining: Using a Lathe Methods Guide

If you're passionate about precision, shaping materials, or creating something entirely from scratch, learning how to use a lathe is an essential skill. A lathe isn’t just a tool, it’s a gateway to mastering metalworking, woodworking, and countless creative projects. Whether you're crafting a custom doorknob, shaping a metal ring, or producing machine threads, a lathe is your key to efficiency, accuracy, and artistry.

So what exactly is a lathe?

At its core, a lathe is a powerful machine tool that rotates a workpiece along its axis while various cutting tools shape it. This shaping method allows for symmetry, consistency, and a professional-grade finish. Originally created to shape cylindrical metal objects, lathes have evolved dramatically. Today, modern lathes come with adjustable speeds, precision control, and advanced safety features that cater to both manual and automated machining needs.

Getting Started with a Lathe

Before you begin using a lathe, preparation is critical. Ensure your machine is stable, your cutting tools are aligned, and your workpiece is firmly secured in the headstock using a jaw chuck. Once you've installed the protective chuck guard and selected the appropriate spindle speed (RPM), you’re ready to begin shaping.

Always wear protective eyewear and avoid loose clothing. As you advance your tool toward the rotating material, make sure to proceed with a gentle, controlled pass. Whether you're creating smooth curves or precise cuts, your hand position, tool angle, and speed all matter.

Machining Methods with a Lathe

Among the most common methods is lathe drilling, which includes:

Center Drilling: For precise hole placement at the center axis.

Pilot Drilling: Used to guide larger drill bits and ensure chip clearance.

Larger Size Drilling: Gradually enlarges the hole while reducing RPM.

Reamer Drilling: Delivers the final polished hole size with strict precision.

Each technique demands control and consistency. A small error in alignment or feed rate can impact the entire operation. That’s why understanding each method and its purpose is so important.

Drill Bit Sharpening

You can even use a lathe to sharpen your drill bits, but you'll need to understand back rake angles and maintain alignment throughout the process. It’s technical, yes but incredibly satisfying once mastered.

Safety First

Safety is never optional when operating a lathe. Always stop the machine before adjusting the tool or changing spindle speed. Never use your hands to remove metal chips; instead, use a brush or pliers. Loose clothing, jewelry, and distractions are common causes of accidents and should be avoided at all costs.

Lathe Maintenance

Your lathe needs care, just like any precision tool. Regular lubrication, tightening of fasteners, and checking alignment should be part of your daily routine. A well-maintained lathe not only performs better but lasts much longer and keeps you safe.

Ready to dive deeper into the world of lathe machining? Click here for the full guide on Using a Lathe Methods for Machining

[ultimatepandapsion]

Top 10 Precision Jewellery Making Tools Every Artisan Needs

Imagine this: you’re working on a custom engagement ring for a couple who met in college, and they want a hidden heart-shaped engraving under the setting. Your heart’s racing because you know any slip-up could mean starting over—and they’re on a tight deadline. Enter precision tools, your safety net.

Digital Caliper for Jewellery Measuring

Why it rocks: You’ll never second-guess a 0.02 mm tolerance again.

Story moment: I once misread a ruler and cut a shank too small. The digital caliper saved me from a grounding call to the client that afternoon.

Adjustable Ring Mandrel

Why it rocks: Shapes rings with perfect roundness—no more wonky circles.

Anecdote: After my first year in business, a customer returned complaining his ring felt “off.” A mandrel reshaped it, and he became a repeat client.

Beading and Stringing Tools

Why it rocks: Crimpers, bead reamers, cutters—everything in one kit so you can whip up necklaces and bracelets in minutes.

Tip: Keep rubber-tipped pliers handy to protect delicate beads from scratches.

Micro-Motor Polishing Machine

Why it rocks: Hand-polishing tiny crevices is a workout—and not in a good way.

Story moment: I polished a filigree pendant for hours by hand only to have a customer comment, “It’s … nice.” Lesson learned: tools matter.

Gemstone Engraving Tools

Why it rocks: Add personal flourishes or monograms with surgical precision.

Tip: Practice on scrap metal—your first initials will look like a kindergartner’s until you get the hang of it.

Bench Pin

Why it rocks: Your portable work surface supports sawing, filing, and setting all in one spot.

Anecdote: That little wooden V-shape saved me from buzzing through half my ring when I slipped during a sawing session.

Soldering Pick & Tweezers

Why it rocks: Keeps your hands steady and your solder placements exact.

Tip: Treat them like your favorite pen—clean, oil, and store them properly to avoid misalignments.

Jeweller’s Magnifying Visor

Why it rocks: Two hands free, one workbench, and your eyesight magnified by 3x or more.

Anecdote: After squinting over a clasp for half an hour, I gifted myself a visor—and it was a game-changer.

High-Speed Rotary Tool

Why it rocks: From drilling to carving to micro-polishing, it’s like having a mini power tool for delicate work.

Tip: Always stock up on varied bits—each shape serves a different purpose.

Pro Scriber & Center Punch

Why it rocks: Marks drilling and cutting locations with pinpoint accuracy.

Story moment: Dropped a ring I was setting and lost my mark. A scriber prevented many reruns of that mistake.

Looking for the "5 Essential Jewellery Tools to Boost Store Efficiency and Precision." This list is your go-to guide for agencies that combine strategy, creativity, and proven results.

[anonymous-whiteguy]

The fact that they named it a citrus REAMER.... they knew what they were doing. they should have at least put a flared base for safety. You don't want to get citrussy juices on your hands. 😂

Citrus Reamer

[gyanfactory]

Best Electrical Hand Tools

Best Electrical hand tools

Introduction:

Electrical hand tools are not limited to just electronic work; they play a crucial role in everyday hobby projects, repairs, and small-scale production industries. With the integration of modern technology, the efficiency and accuracy of these tools have improved, helping to ensure high-quality work.

As the demand for electronic devices continues to grow, hand tools are being upgraded and developed with new technologies to enhance their capabilities. These tools are not only becoming more advanced but also smarter. Using the right hand tool for a specific task allows for faster and more precise completion of work. The addition of modern sensors, automatic calibration, and digital displays has significantly increased the performance and functionality of these tools.

Electrical hand tools list:

Electric drill and drill bits: Electric drills and drill bits in the range of 0.31 cm to 1.27 cm will come in handy when you need to drill holes on the printed circuit board (PCB) that has been etched. Drilling of plastic or metal enclosures that house the PCB is sometimes necessary. A suitable PCB high speed drill can be easily obtained from any electronics shop.

Soldering iron: A 20-watt to 30-watt soldering iron with tips of 0.31 cm to 1.27 cm can be used for soldering through-hole components. Soldering surface mount components may require smaller tips, depending on their size. Soldering irons normally last a long time if taken care of properly by keeping the tips clean and well tinned.

Wire stripper: This is used to strip off the wire insulator from its conductor before it is used to connect t another wire or soldered into the PCB. Some wire strippers or cutters have a measurement engraved on them to indicate the length that will be stripped.

Long nose pliers: Nose pliers of 10 cm length will come in handy when you have to hold components that have short leads and need to be soldered onto the PCB but it will be too hot to handle with bare hands. It can also be used to hold the component that needs to be de-soldered from the board.

Side-cutting pliers: A pair of 10 cm side cutting pliers is handy to trim off excess component leads on the PCB and cut wires into shorter lengths before being used.

Tweezers: Small tweezers are used to hold small components, especially when soldering and de-soldering surface mount components.

Flat head screwdrivers: These tools come in various sizes since there are many different screw sizes.

Socket wrench sets: These include nut drivers, hex drivers and starters in assorted sizes which are handy during the assembly work of electronics projects.

Pocket knives: These are useful to cut PCBs, wires or remove some coper from the board.

Electrical hand tools can be divided into several groups:

Laying out tools – used for measuring and marking.

Impact or striking tools – hammers, mallets and sledges

Twisting tools or fastening tools – wrenches and screwdrivers

Metal-cutting tools – dies, drills, files, punches, reamers, taps

Holding tools – clamps, pliers, vices

ESD safe equipment – goggles, gloves

Grinding and sharpening tools

Finishing tools and abrasives

Tool storage and accessory containers

Advantages of electrical hand tools:

Hand tools are faster than machines. Of course, if many identical parts need to be cut, hand tools are definitely slower. But if you work on a unique project, it will surely be easier to perform some operations with hand tools, rather than waste time in setting up and configuring a machine.

One advantage of hand tools is that they are cheaper than power tools. Another benefit is that they are much safer than power tools, which is important for both beginners and amateurs, who use hand tools for quick repairs.

Important things to look in electrical hand tools:

Safety in work:

Though it is difficult to make improvements to tools such as hammers, wrenches, pliers and screwdrivers, but there have been some products which have to be come improvements so that electric work can be done with much safety way. The utility of knife is a great example of a hand tool that has been given a lot of attention, and there have been some great safety enhancements made to it recently.

Testing process:

A lot of communication and electronic systems are deployed on the field, and this requires live testing in active conditions. With the advent of new technology, nearly 80 per cent of the actual testing can today be caried out with handheld tools.

Easy to handle:

Small changes to hand tools go a long way making them safer as well easy to handle. One major safety feature of most hand tools is insulation with rubber or plastic materials. This not only protects those working with live electricity but also gives them an extra grip, making the tool easier to handle and reducing the chance of it slipping from their hands.

Multi-functional uses:

Tool manufacturers are working hard to design electrical hand tools that not only work better, but are multi-functional as well. One of the most common multi-functional tools used today is a multi-bit screwdriver. It works in one of two ways – by either storing multiple bits in its base which can be snapped on magnetically when needed, or by using a slide system by which you can simply slide the bits up from a track on the inside of the screwdriver’s base.

Read: Maintenance of Electrical Hand Tools

[podjewellery]

Jewellery Making Tools: Essential Equipment for Crafting Stunning Pieces

Jewellery making is an intricate and rewarding craft that requires skill, creativity, and the right tools. Whether you're a beginner or an experienced artisan, having the proper jewellery making tools can make a significant difference in the quality and ease of your work. This guide explores the essential tools needed to create beautiful handmade jewellery.

1. Basic Hand Tools

Pliers: Essential for bending, shaping, and holding wires and metals. Types include:

Round-nose pliers (for creating loops and curves)

Flat-nose pliers (for gripping and bending)

Chain-nose pliers (for precision work in tight spaces)

Wire Cutters: Used for cutting metal wires and chains cleanly and precisely.

Tweezers: Handy for picking up small components such as beads and jump rings.

2. Metalworking Tools

Jeweller’s Saw: A small, fine-toothed saw for cutting metal sheets and intricate designs.

Files and Sanding Tools: Used to smooth rough edges and refine details.

Hammer and Anvil: Essential for shaping and texturing metal.

Bench Pin: A small wooden support that provides stability while working on metal pieces.

3. Soldering and Joining Tools

Soldering Iron or Torch: Used to heat and join metal pieces with solder.

Pickle Pot: A solution used to clean oxidation from metal after soldering.

Third Hand Tool: A clamp that holds pieces in place while soldering.

4. Beading and Stringing Tools

Bead Reamer: Helps in enlarging and smoothing bead holes.

Crimping Pliers: Used to secure crimp beads and clasps in place.

Knotting Tools: Ideal for creating professional-looking knots in pearl or bead jewellery.

5. Measurement and Marking Tools

Calipers: Provides precise measurements of beads, wires, and metals.

Ruler and Measuring Tape: Essential for accurate dimensions and design alignment.

Metal Stamps and Engraving Tools: Used for adding personalized text or patterns.

6. Polishing and Finishing Tools

Polishing Cloths and Compounds: Used to bring out a high shine on metal surfaces.

Rotary Tool or Dremel: Speeds up polishing, drilling, and finishing tasks.

Tumbler: Used for smoothing and shining metal pieces efficiently.

Conclusion

Having the right jewellery making tool is crucial for producing high-quality, professional pieces. Investing in durable and reliable equipment ensures precision, efficiency, and creative flexibility. Whether you’re working with beads, metals, or wire, equipping yourself with the right tools will help bring your jewellery designs to life with ease and perfection.

For more info visit here:- Mandrel

[theworldcigarr]

How to Maintain and Clean Your Cigar Pipe

Introduction

Cigar pipes are a classic choice for cigar enthusiasts who enjoy a unique smoking experience. Much like cigars themselves, cigar pipes require proper care and attention to maintain their quality and ensure a long lifespan. Regular cleaning and maintenance not only extend the life of your pipe but also enhance the flavor and smoothness of your smoking sessions. Whether you’re new to the world of cigar pipes or a seasoned smoker, understanding how to properly maintain and clean your cigar pipe is essential.

In this guide, we will cover everything you need to know about maintaining and cleaning your cigar pipe, including essential tips, tools, and step-by-step instructions to keep your pipe in perfect condition.

Why Regular Maintenance is Essential for Your Cigar Pipe

Maintaining your cigar pipe is crucial for several reasons. First and foremost, a well-maintained pipe ensures that you get the best smoking experience. Over time, residue from tobacco and oils can build up, altering the flavor of your smoke and potentially making your pipe harder to draw. Cleaning your cigar pipe regularly helps to preserve its structure, flavor, and functionality.

Furthermore, proper care helps prevent the formation of mold and mildew, which can be detrimental to both your pipe and health. A clean cigar pipe is essential for an enjoyable and safe smoking experience. Let’s dive into how to properly maintain and clean your cigar pipe.

Tools Needed to Maintain and Clean Your Cigar Pipe

Before you start cleaning your cigar pipe, it's important to have the right tools at hand. The following list will help ensure you have everything you need:

Pipe Cleaner

A pipe cleaner is essential for cleaning the inside of your cigar pipe, especially the stem. It’s designed to remove dirt, oils, and moisture without damaging the interior of your pipe.

Soft Cloth

A soft, lint-free cloth is ideal for wiping the exterior of your cigar pipe. It helps remove oils and residues that can accumulate on the surface of the pipe during use.

Bristle Cleaner

A bristle cleaner is a slightly more specialized tool that is useful for scrubbing away stubborn residue from hard-to-reach areas inside the pipe. It’s great for giving your pipe a deep clean.

Pipe Reamer

A pipe reamer is used to maintain the bowl of your cigar pipe. It removes the buildup of carbon, which can accumulate from repeated use and create uneven burning.

Alcohol (Isopropyl Alcohol)

Alcohol is an effective cleaning agent for removing sticky residues from your cigar pipe, especially from the stem. Make sure to use a 90% or higher isopropyl alcohol solution to ensure it evaporates quickly and does not damage your pipe.

Pipe Polish

For an extra shine and added protection, a high-quality pipe polish can help restore the look of your cigar pipe, leaving it glossy and well-maintained.

Step-by-Step Guide to Cleaning Your Cigar Pipe

Cleaning your cigar pipe doesn’t have to be a complicated process. With the right tools and techniques, you can keep your pipe in excellent condition. Follow these simple steps to clean your cigar pipe thoroughly.

Step 1: Disassemble the Cigar Pipe

The first step is to carefully disassemble your cigar pipe. Remove the stem from the bowl to prevent any unnecessary force from being applied. Set the two pieces aside separately, as each part will need to be cleaned individually.

Step 2: Clean the Stem

The stem of your cigar pipe can accumulate moisture and oils from repeated use, which can affect the flavor and smoking experience. To clean the stem:

Take a pipe cleaner and dip it into a small amount of isopropyl alcohol.

Gently push the pipe cleaner through the stem, twisting it as you go. This will help to dislodge any moisture and residue inside the stem.

Repeat this process until the pipe cleaner comes out clean.

Allow the stem to dry completely before reattaching it to the bowl.

Step 3: Clean the Bowl

The bowl of your cigar pipe is where most of the tobacco residue will accumulate. This area requires a bit more attention, especially if you’ve been smoking for an extended period.

Use a pipe reamer to gently remove any buildup of carbon from the interior of the bowl. Turn the reamer slowly to avoid damaging the bowl.

After removing the carbon buildup, use a bristle cleaner to scrub the inside of the bowl. Gently twist and turn the bristle cleaner to reach all areas.

For stubborn residue, you can use a small amount of isopropyl alcohol on a cloth to wipe the inside of the bowl. Be sure not to oversaturate the cloth to avoid damaging the wood.

Finally, allow the bowl to air dry for several hours to ensure no moisture remains inside.

Step 4: Clean the Exterior of the Cigar Pipe

The exterior of your cigar pipe is just as important to maintain. Over time, oils from your hands and smoke can leave residue on the pipe’s surface. To clean the exterior:

Use a soft cloth to gently wipe down the surface of your cigar pipe.

For deeper cleaning, apply a small amount of pipe polish to the cloth and buff the pipe to a glossy shine. This will not only make your cigar pipe look great but also provide a layer of protection against future wear.

Step 5: Allow the Pipe to Dry

Once you have finished cleaning both the stem and the bowl, it’s important to allow your cigar pipe to dry completely. This prevents any moisture from affecting the pipe’s structure or flavor. Place your pipe in a well-ventilated area, and give it ample time to dry before reassembling.

How Often Should You Clean Your Cigar Pipe?

The frequency with which you clean your cigar pipe depends on how often you use it. For regular smokers, it’s advisable to clean your cigar pipe after every 3 to 5 uses to ensure it performs at its best. If you’re a more occasional smoker, cleaning your pipe every 10 to 15 uses should suffice.

However, if you notice any changes in the flavor of your smoke or difficulty drawing through the pipe, it may be time for a thorough cleaning, regardless of the number of uses.

Common Issues and How to Fix Them

Even with regular maintenance, your cigar pipe may experience certain issues. Here are some common problems and their solutions:

Difficulty Drawing

If you find it difficult to draw air through your cigar pipe, the stem or bowl may be clogged with residue. This can be resolved by cleaning the pipe thoroughly, especially the stem, with a pipe cleaner. If the clog persists, check for any cracks or blockages inside the pipe.

Sour Flavor

A sour or unpleasant flavor can occur if there is an excessive buildup of tobacco residue in the bowl or stem. Cleaning the pipe thoroughly and reaming the bowl should help remove this buildup. Additionally, allowing your pipe to dry completely between uses can prevent moisture from contributing to this issue.

Cracks or Damage

If you notice cracks or visible damage on your cigar pipe, it’s essential to repair or replace it as soon as possible. Cracks can lead to air leaks, affecting the overall smoking experience. Depending on the extent of the damage, a pipe repair kit might help, but it’s often best to consult a professional or replace the pipe.

Conclusion

Maintaining and cleaning your cigar pipe is an essential part of being a true cigar enthusiast. By following these steps and tips, you can ensure your pipe lasts longer, performs better, and provides a more enjoyable smoking experience. Remember, the key to keeping your cigar pipe in prime condition is regular cleaning and careful maintenance. Whether you're a beginner or a seasoned smoker, a well-maintained cigar pipe will always deliver a smooth, flavorful experience.

[vibra1]

How do you deburr internal holes or threads in metal?

Introduction

Deburring involves removing burrs—sharp edges, splinters, or unwanted protrusions—formed during drilling, threading, or machining. These imperfections compromise part integrity, lead to wear, and pose safety hazards. For components with internal holes or threads, a metal deburring tool is particularly important to ensure compatibility with other parts and maintain structural soundness.

Why Is Deburring Necessary?

Enhances Component Performance: Eliminates sharp edges that cause misalignments or stress points.

Improves Safety: Prevents cuts or injuries during handling or assembly.

Ensures Dimensional Accuracy: Removes excess material that could alter hole diameter or thread specifications.

Techniques for Deburring Internal Holes

Here are some reliable methods for achieving burr-free internal holes:

1. Manual Deburring Tools

Manual tools like deburring blades and countersinks are popular for small-scale operations or precision work. They allow careful removal of material without damaging the hole’s edges.

Best For: Small holes, intricate parts, and prototypes.

Tools Required: Hand deburrers, reamers, and needle files.

2. Rotary Deburring

Rotary deburring uses tools such as burr bits or brushes attached to a rotary tool or drill. The spinning motion effectively removes burrs while maintaining consistent results.

Best For: Cylindrical holes with shallow depths.

Tools Required: Rotary deburring brushes, carbide burrs.

3. Thermal Deburring

Thermal energy method (TEM) involves igniting a gas mixture to instantly burn off burrs. It’s ideal for removing burrs from hard-to-reach places.

Best For: Complex geometries and batch processing.

Considerations: Requires specialized equipment and expertise.

4. Electrochemical Deburring

This method uses electrolytes and electrical current to dissolve burrs. It’s precise and excellent for deburring delicate components without mechanical stress.

Best For: Precision parts, aerospace components, and medical devices.

Tools Required: Electrochemical setup, customized electrodes.

Techniques for Deburring Internal Threads

Deburring threaded areas requires extra care to preserve the integrity of the threads. Below are the top approaches:

1. Tap and Die Sets

Passing a tap through internal threads can effectively clean and deburr them. This method is simple yet reliable for lightly burr-affected threads.

Best For: Standard threads and minor burr removal.

Tools Required: Correctly sized taps.

2. Thread Files

Thread files are excellent for manually refining threads by aligning with the pitch and removing excess material.

Best For: Manual corrections or non-standard threads.

Tools Required: Thread files matching thread profile.

3. Abrasive Brushes

Abrasive brushes are mounted on drills or other rotary tools and passed through the threads. They remove burrs efficiently while maintaining thread precision.

Best For: Consistent thread cleaning.

Tools Required: Abrasive nylon or wire brushes.

Choosing the Right Deburring Tool

When selecting tools, consider:

Material Type: Steel, aluminum, and titanium may require different tools.

Part Complexity: Intricate designs may necessitate advanced deburring methods.

Volume Requirements: Batch processing benefits from automated or thermal methods.

Tips for Effective Deburring

Inspection: Use magnifying tools to identify burrs and verify removal.

Tool Maintenance: Ensure tools are sharp and properly calibrated.

Workpiece Stabilization: Secure parts to prevent movement during deburring.

Operator Training: Skilled handling minimizes risks of over-deburring or damaging components.

Conclusion

Deburring internal holes and threads is a vital step in manufacturing that ensures quality, functionality, and safety. From manual methods to high-tech solutions, a variety of techniques cater to different needs. By choosing the right tools and processes, you can achieve a polished finish and maintain the integrity of your metal components.

Frequently Asked Questions (FAQs)

1. What is the most cost-effective method for deburring internal holes?

Manual deburring tools like blades or countersinks are budget-friendly and effective for small-scale tasks or prototypes.

2. Can thermal deburring damage my part?

Thermal deburring is safe for most metals but unsuitable for heat-sensitive materials like certain plastics or composites.

3. How do I deburr small-diameter holes?

Use micro-deburring tools or abrasive brushes designed for precision in tight spaces.

4. What are common mistakes in deburring threads?

Applying too much force, using incorrect tools, or failing to match the thread pitch can damage threads during deburring.

5. How often should deburring tools be replaced?

Replace tools when they become dull or produce inconsistent results. Regular inspection ensures optimal performance.

[atplblog]

Price: [price_with_discount] (as of [price_update_date] - Details) [ad_1] Product Description AMZING JUICER AMZING JUICER EXTRA 90% OF THE JUICE FORM BEST JUICER This juicer maker is an electric juice press that can produce juice instantly and purely. It has a spiral reamer that can squeeze citrus fruits like orange, lemon, lime, pomegranate and grapefruit For durability, this fruit squeezer is constructed with an engineered ABS sleek stainless steel and stain resistant housing WONDERFUL JUICER COMPACT DESIGN: The size is highly compact and portable. It does not take up any Space. Use it at home or take it to the picnic so you can have a nutritious juice any time of the day. WIRELESS & PORTABLE DESIGN: The electric citrus juicer uses USB-C technology for charging. Take our wireless citrus juicer to the outdoor camp and don't worry about running out of power. Enjoy delicious juice anytime and anywhere with one click! EASY TO USE & CLEAN: The juicer extractor is assembled in several parts, all detachable for easy separation and cleaning. It's equipped with a brush to help clean. But please do not use the dishwasher to clean all the parts and do not wash the main body, it's recommended to wipe it with a wet cloth, other parts can be washed by hand. USB Charging??USB charging design, cordless and portable, you can squeeze juices anytime, anywhere, so you can use it with confidence. ✅【FASHION & PORTABLE DESIGN】Our juicer is portable, allowing you to take it with you wherever you go. The electric juicer uses USB-C technology for charging, making it more convenient to charge your juicer while you're on the go or traveling, without having to worry about running out of power. (Note: For safety, it cannot be used while charging.

✅【SAFETY & HIGH QUALITY MATERIAL】The electric juicer is made from BPA-free ABS material so that can juicing fresh and healthy juice for both kids and adults. ✅【EASY TO USE & CLEAN】Our electric juicer is super easy to clean because of its detachable parts. It comes equipped with a brush to help clean it, but please do not wash the electric main body, other parts can be washed by hand. ✅【One-click juicing】: Orange juice squeezer only needs one button to control the startup, instead of the traditional hand pressing,press the switch for two seconds to turn on the power, and press the switch again to automatically squeeze the juice , with clear scale marks for easy viewing ✅【WHY CHOOSE MABRON JUICER】The electric juicer has excellent quality and aesthetics. Its 45-watt motor allows you to make a cup of juice in 20 seconds with less noise and no shaking or tipping. With MABRON juicer, you can give your loved ones fresh juice every day and enjoy your time together [ad_2]

[sanyparts]

61009238 Angle Sensor for SANY machinery

61009238 Angle Sensor SANY spare parts Mail:imeppon@gmail.com 21007288 - 59012780 碱面 10137715 Plate 10243502 Thread seat 10421963 Grease nippple 59012555 秋葵 10258792 Tail sealing board 52001256 SANY PARTS 10286650B SANY PARTS 10260912 SANY PARTS 10263035 Lower bent plate 52001721 SANY PARTS 168899003652A Bracket 10139259 280A Centre gear 1802773 输料管法兰螺丝(AMS) 10474703 SANY PARTS 180104070114B Compound Reamer 160102150017A120 Intake Air Heater 10135169 Bending plate 160102010020A034 KEY,WOODRUFF 10028450 Right baffle 10046391 Shaft Sleeve 59001674 SANY PARTS 61008120 Fan 53000258 SANY PARTS 919090300020A bracket 22028965 Spare part SPYS-0338 55x60x25 ÉÛÒººé¸ñ 10110710L Front end sleeve 61005686 zhujiyouqifang motor 61025727 Planet Gear Washer 10125147 SANY PARTS 22040337 12M Side Label 1 SPEB-0643 61026792 gripper counterweight bucket rod Str 160602010190HBA Air Filter 10015415 Ear Plate 919082800012A 座椅宽扶手FF12宽120 10693597 Block the plank RMG5502.5.10-1 61025300 Snap Ring 22014821 Electrical system for boom SPKET00004 10459559 支座FHJ2000.18.1.1 10235548 密封垫YL1Z.1.6-11 10666221 outer side plate 10474843L SANY PARTS 61011749 Hydraulic floating joint 22066920 Cylinder tube SPHY-0467_TUBE /HY2921_TU 180103010291A High Speed Steel Bits 10503005 SANY PARTS 10448966 SANY PARTS 10277144 flange 24920614 Acoustic generator flange 9181102000002 空气储罐2m 22004728 Conductive ring harness SPEEA-0039 10190013L SANY PARTS 21012246 Side riser 24900739 SANY PARTS 10460184 SANY PARTS imeppon@gmail.com 160102040050A235 Rubber Sleeve 10183649327 Crawler Crane assemly 526204 RACE-THRUST 180109010051A Adaptor 169900000283A Starter 10570742 SANY PARTS 24903448 Retainer board 10460822 SANY PARTS 160101020002A281 Nitrogen Oxide Sensor 10239484 reinforced tube 10033425M 衬套铸坯（H1A.6-7）- imeppon@gmail.com 21038811 Steel Pipe Assy. 22061365 2rd boom upper wing plate SP447P0102 160102140001A172 Intake Valve Bridge 918090300027 cab final assembe card 160801040141A Hydraulic Radiator Y1000×516×145-61 10133942 Right Support 918072400002 双头螺柱 M20*150GB901 181500002583A Return Label 10010507 pipe nip 10046032 Bridge heat-conducting oil tube DL014.24 21024858 SANY PARTS 10204112 Bracket 10118566 SANY PARTS 52000045 泸州老窖 52%vol 500ml/瓶 160101080048A092 Articulated Blot 921110400029A SYHJ-2021-ML-DJ 10413027 SANY PARTS 181299000737A Wood 160101060007A053 Connection Ⅲ 180110990489A spring collet 10125825L 销轴料坯J1C.11.31-5(L) 918071500012 2018010项目板框压滤机漏斗V1111 67341649775 Winch SPBW-0041A (J02.52.5485W)IYJ2.52.5 10244484 前灯罩总成LCZ1.11.1 160101100020B086 Sleeve, Pressure & Lubrication Tube 10473632B SANY PARTS 181604000441A 130TB shielding materials 160104000794A Stud 530587 WASHER, BEARING LOCK 21035652 Plate 61023640 浮台（固定侧）630*270*20 10266018 Semi-finished product of Earring(ZXSRT55 168807000039A hose 10425120 SANY PARTS 21029639 Connector 67312862022 Cylinder SPUP-0229A imeppon@gmail.com 527140 PISTON-BRAKE 67335962540 Nut M24x1.5_DIN582 M24¡Á1.5 ´ï¿ËÐâ´¦Àí / 10124998 Attached tools and spare parts 10117405 Connecting board Ⅰ 180102010466B Endmill imeppon@gmail.com 10268685 Assembly, rod, threaded, left-hand 919051600028A SRSC40H1-6H type marking 10047212 Transverse RodFG1503500.3-1 160102030041B061 Oil Cooler Water Piping 181604001427A Rubber coating 59000928 SANY PARTS 160701000015A Supercharge 160101100054A022 Air Compressor Return Water Pipe 10230477 plate 920112600011A Container Yard Access Control System 160101110026A030 Lock Plate 21015680 Draw cord seat 10633838 Type the steel RMG5001.11.1.1-1 59011408 SANY PARTS 180302000248A Nozzle 22044193 Threaded rod mounting plate SP501G0112 24002292 Stud Bolt 180109010467A Full Type Tool Holder System 61030462 press brake tool 61017822 Copper Tube 10614490 Cylinder Body 10450562 Flange interface Read the full article

[potaunderscore]

guitar status update 1: documenting the headstock; planning

here are two pictures of the front and back of the headstock of my guitar:

first, let's tackle the front, going from top to bottom:

the epiphone and 'les paul model' silkscreens: i'll be leaving those alone. while it'd be cool to do some custom logo work, using an alternate epiphone logo, or installing a 'bikini' badge, i don't want to bloat this project beyond what i already have planned. both logos are in good shape, and won't look out of place when this project is done, so they can stay (for now).

the tuner holes: these hole measure 7.5mm across. the ferrules for the tuners that i purchased measure 9mm across. i looked at a few guides online, and it seems like the best course of action would be to purchase a hand reamer. it's slower than a drill, but with slowness comes control. to prevent tearout or finish cracking, i will be putting tape across the holes before beginning the process, and will slowly remove material, checking often with digital calipers, until the desired diameter is achieved.

the truss rod cover: i have no memory of ever removing the truss rod cover, so it seems as if the two extra screw-holes are a factory defect. since the holes will be covered up, i don't see any need to plug them, unless some circumstance in the future demands it. i have no plans right now to replace the truss rod cover with something else, but i'm open to the idea if i see one for sale that i find interesting enough.

the nut: i don't see any reason to replace the nut. the depth of the slots never caused me trouble, and i feel confident that i can file the slots if i want to switch to a heavier string gauge. if i install a vibrato system, i can address binding issues with a string butler, lubricant, and a set of files.

now, for the back, proceeding in the same fashion:

the serial number: this is not a valuable guitar, and i don't see myself ever selling it, so i don't see a need to preserve the serial number to prove authenticity down the road. i also don't see any reason to remove it, either. my position is the same as with the silkscreens on the front.

the tuner mounting screw holes: these screw holes are not in the correct places for the new tuners i will be installing. i will need to plug the old holes and drill new ones. i'll tackle the plugging first: toothpicks and wood glue will easily do the job. the harder question is what to do afterwards. i will do a light sand to bring the plugs flush with the surface, but i don't know how (or if) i should touch up the clear coat. if i choose the wrong clear coat to touch up with, there could be a bad reaction with the existing polyurethane, turning the entire back of the headstock into a gloopy mess and potentially producing toxic fumes. i'll need to research this thoroughly to avoid that. as for the new screw holes that i'll be making, i'll need to be very careful choosing their locations, as i would hate to have crooked tuners. this would be easy if the tuner holes were actually in two straight lines parallel to each other, but that's unfortunately not the case. i'll need to bust out some straight edges and pencil for this one. once the locations are marked, the question arises: hand drill or power tools? a battery-powered drill is faster than a pin vise, but as with the ferrule holes, any mistake is likely to be much more difficult to fix. this, too, will need to be considered.

the plan for the headstock moving ahead, listed in numbered steps:

ream the holes for the ferrules

plug the tuner screw holes

spray new clear coat over the plugs (maybe)

drill new holes for the new tuners

install the tuners