#lcd display fpc

[zylcd]

How to clean and maintain industrial control displays?

You need to be extra careful when cleaning and maintaining industrial control displays, because industrial environments are usually more severe, with dust, oil, chemicals, static electricity, etc. Moreover, the display may have integrated touch functions. It is best to follow the correct steps to clean and maintain it in order to effectively extend its service life and avoid damage. Below, the editor will explain to you how to clean and maintain industrial control displays.

1. Preparation before cleaning is crucial: Before cleaning the industrial control display, be sure to disconnect the power supply and confirm the screen material. Prepare cleaning tools such as microfiber cloth/dust-free cloth, special screen cleaner or distilled water/purified water, air blower, etc. Avoid using corrosive cleaners such as alcohol and ammonia.

2. Correct cleaning steps are key: First, blow away the dust with an air blower, then spray a small amount of detergent on a clean microfiber cloth and gently wipe the screen in one direction. Use a cotton swab to clean the edge gaps, and finally wipe the screen with a dry, clean cloth to ensure that there are no water stains and detergent residues.

3. Daily maintenance cannot be ignored: Regular cleaning (once a week/month) is a must. Reduce the number of times you touch the screen, avoid liquid splashing, and avoid direct sunlight. Keeping the environment clean and reducing static electricity can effectively extend the life of the display.

4. Special screens require special treatment: Be more careful when cleaning touch screens (capacitive screens/resistive screens), avoid using corrosive detergents, and pay attention to strength control. It is crucial to understand the characteristics of different screens and choose the right cleaning method.

5. Avoid wrong cleaning methods: Do not use ordinary paper towels or rough cloth to wipe to avoid scratching the screen. Do not spray detergent directly on the screen to prevent liquid from penetrating. Avoid pressing the screen too hard to damage the LCD panel. Choosing the right cleaning tools and methods is the key to ensuring screen safety.

In short, regular and correct cleaning and maintenance, combined with good environmental control and operating habits, can effectively extend the service life and reliability of industrial control displays in harsh industrial environments. If you are not sure what to do, you can first refer to the equipment manual and consult the equipment supplier.

With over 18 years of expertise, Shenzhen Zhiyan Optronics Co., Ltd. (zylcdshop.com) is a trusted supplier based in China, specializing in high-performance LCD screens. We deliver tailored display solutions, consistent quality, and competitive factory-direct pricing to meet diverse industry needs.

[rocktechsbc]

A Practical Guide to Customizing TFT LCD Displays for Embedded Projects

When designing an embedded system, picking the right display module is more than a technical choice — it directly shapes how users interact with your product.

From medical devices and HMIs to industrial controllers and smart panels, standard TFT LCD modules may not always be enough. That’s where custom displays come in — offering flexibility in electrical interface, mechanical layout, and visual performance.

This guide covers the five key areas you should consider when customizing a TFT LCD for your embedded project.

1. FPC Layout and Pin Mapping

The Flexible Printed Circuit (FPC) connects your LCD module to the mainboard, and in custom designs, this interface is often the first thing to change.

Ask yourself:

Do you need a uniquely shaped or angled FPC to fit inside your housing?

Are there ICs, resistors, or other components on the backlight or CTP that require mechanical clearance?

Is your SBC’s connector pinout compatible with the LCD’s FPC layout?

A mismatch here can lead to signal errors, mechanical stress, or even damage to components.

2. Backlight Brightness and Color Temperature

Not all embedded devices live under the same lighting.

If your product is used outdoors or in industrial lighting, consider high-brightness backlights (≥800 nits). For environments where aesthetics and color warmth matter (like smart mirrors or indoor kiosks), choose the right LED color temperature:

3000K (Warm White): Soft, suitable for medical or ambient lighting

5000K (Neutral White): Balanced tone, accurate colors

6500K+ (Cool White): Sharper, more industrial feel

A poorly lit display can make a great device feel underwhelming.

3. Touch Panel Shape and Bonding Options

If your display includes a touch interface, customizing the Capacitive Touch Panel (CTP) is critical.

Typical customizations include:

Round corners, logo cutouts, button holes

Bonding methods:

Optical bonding: Improves visibility, reduces reflections, stronger seal

Air bonding: More affordable and easier to assemble

The bonding method directly impacts touch accuracy, display clarity, and long-term reliability.

4. Surface Treatments: AG, AR, and AF

For devices exposed to bright light or frequent finger contact, display surface treatments make a noticeable difference.

AG (Anti-Glare): Scatters reflected light, improving readability

AR (Anti-Reflection): Enhances contrast in sunlight or strong lighting

AF (Anti-Fingerprint): Reduces smudges, improves touch feel

Combining AG+AF is a common choice for public-facing touchscreen displays.

5. Want to Learn More?

If you’re building with platforms like RK3566, PX30, or Allwinner boards and need a reliable display solution — including driver compatibility and electrical tuning — check out our full technical article:

👉 Read the Full Custom TFT LCD Guide

You can also browse driver/device tree examples on GitHub:

📂 rocktech-tft-display-configs

[cartronix1]

Digital Dashboard and LCD Pixel Repair: Quality, specialized and reliable services

A digital dashboard is an advanced electronic instrument cluster that replaces traditional analog gauges with a screen. It displays important vehicle information such as speed, RPM, fuel level, temperature, and diagnostics. Many modern vehicles now come with digital dashboards because they offer better graphics, flexibility, and customization options. These dashboards usually include components like LCD panel, protective screen, optional touchscreen, backlight, and electronic circuits.

However, over time, digital dashboards can face display issues. One common problem is dead or fading pixels on the LCD screen. This can affect readability and overall functionality. Pixel issues are often caused by faulty connections within the LCD assembly, such as zebra or FPC (Flexible Printed Circuit) connections, rather than the screen itself. Cartronix, a leading automotive electronic repair provider in the UK offers comprehensive digital dashboard and LCD pixel repair service.

Why Choose Us

Cartronix offers full-scale digital dashboard and LCD pixel repairs. There is a team of fully qualified electronic engineers make sure that every repair is done with precision and care. It has built a strong reputation in the automotive industry through years of reliable service and commitment to quality. It repairs various instrument clusters that may suffer from failing gauges, backlight issues, flashing warning lights, or total power failure. They also offer solutions for unreadable LCD displays or missing pixels on the speedometer, radio, or other dashboard components.

Featured Repair Services

One of their popular services is the BMW 3 Series E90, E91, E92, E93 Professional Radio LCD Pixel Repair. This service is for vehicles manufactured 2006-12 with an Alpine CD73 unit. The most common problems include missing pixels or blank LCD screens. Cartronix replaces the LCD screen to restore full functionality.

Another key service is the Audi A4 B8 Full Colour LCD Pixel Repair, covering models from 2008-15. This service also involves replacing the LCD screen to fix pixelated or blank displays. All repairs are performed by experienced and trained engineers, ensuring the highest standard of service.

Two convenient ways of repairing

Cartronix offers two convenient ways to get your instrument cluster repaired. Customers can choose the "while you wait" service by visiting their premises. The repair process takes around 40 minutes, although more time may be needed if removal and refitting are required. Customers are advised to call ahead and book an appointment. All repairs come with a Lifetime Warranty and are typically completed with a next working day turnaround when using the postal service.

Alternatively, customers can use the postal repair service. To do this, the customer must first remove the instrument cluster from the vehicle. Then, fill out the job form available on the Cartronix website. The cluster should be securely packaged and sent via Royal Mail Special Delivery to ensure safe delivery. Once Cartronix receives the unit, they complete the repair. It stands out in the UK automotive repair market by offering specialized and reliable digital dashboard and LCD pixel repairs services and other electronic components. Their focus on quality and customer satisfaction makes them a trusted name in the industry.

[salvationrepair]

Lcd Fpc Connector Compatible For Iphone 5S (J5: 22 Pin)

New LCD flex FPC replacement parts for iPhone 5S to replace the cracked, damaged or non working touch panel flex connector. This FPC connector For iPhone 5S LCD plays an important role in transferring the information between the LCD Display and the logic board, if the LCD Screen of your iPhone 5S blank screen, black screen or vertical line on the screen while the LCD Screen in good condition with…

[vipprogfixphone]

Solution: DL400 Pro Screen Tester Prompts "UNKNOWN FPC" After Software Update

Regarding the issue that the DL400 Pro LCD screen tester displays “Unknown FPC” and cannot be used after updating the software, the solution is that we need to replace the new DL400_V4.0 socket. Since the old socket of the DL400 Pro tester cannot be adapted to the new software and models, the DL400 Pro screen tester will prompt an unknown FPC after updating the software. After using the new…

[luphitouch]

Luphi Electronics see you at Electronica 2024(Munich,Germany)

Electronica 2024 will cover the entire electronics spectrum, featuring everything from components to systems. Luphi Electronics participates in  the 2024  Germany Munich Electronics Fair,  from November 12 to 15, 2024.  Welcoming numerous professionals from various countries  to visit LuphiTouch ( Hall C6, Booth 341.8)!

About Luphi Electronics

Dongguan Luphi Electronics Technology Co., Ltd. (Trademark: LuphiTouch) was established in 2015. The factory covers 4500 square meter. We have 80+ workers and we have been certified by ISO9001, ISO13485, ISO14001 and ISO45001. LuphiTouch mainly focuses on various kinds of human machine interface switch panels, keypads and modules development and manufacturing. Our capabilities cover from mechatronic design, graphic art design, function control PCBA development, MCU development, IC programming, embedded system development to tools making, prototypes making, function testing, mass production and shipping of one-stop total solutions service. We also provide circuit board manufacturing, components sourcing, SMT&PTH assembly, EMS contract manufacturing service for our end clients.

On this fair, Luphi Electronics will show our high quality Products include:

· Medical Membrane Switches（Medizinische Folientasten）

· Backlighting  Membrane  Switches（Hinterleuchtete Folientasten）

· FPC Membrane Switches（FPC-Folientasten）

· PCB  Membrane  Switches（PCB-Folientasten）

· Silicone Rubber Keypads（Gummitasten）

· Capacitive Membrane Switches（Kapazitive Folientasten）

· Backpanel Membrane Keypads （Rückseiten-Folientasten）

· Touchscreen  &  LCDs（Touchscreens und LCDs）

· User Interface Modules（Benutzeroberflächen module）

......

We serve various industries such as medical, industrial control, home appliances, new energy, instrumentation, rail transportation, aviation and navigation, network communications, and mechanical equipment.

Our Commitment to Quality

At Luphi Electronics, we prioritize quality and innovation. Our manufacturing processes are certified under ISO standards (ISO9001, ISO14001, ISO13485, and ISO45001), ensuring that our products meet the highest industry standards. We are proud to be the first ISO13485-certified membrane switch factory in China, we sincerely expect your inquires and look forward to the long-term & stable cooperation with your company!

Professional HMI Switch Sub-assemblies & Touch Display Modules Provider!

Luphi Electronics official website: https://www.luphitouch.com

[applefixnz-blog]

https://applefix.co.nz/blog/samsung-repair-hamilton-new-zealand-samsung-a52-broken-lcd-fpc-connectors

Samsung Repair Hamilton New Zealand Samsung A52 Broken LCD FPC connectors

Repairing broken FPC (Flexible Printed Circuit) connectors on Samsung devices requires precision and care to ensure proper functionality. Here’s a general guide on how to solder a broken FPC connector on a Samsung device:

Tools and Materials Needed:

Soldering Iron: A fine-tipped soldering iron (preferably temperature-controlled).

Desoldering Tools: Such as solder wick or a desoldering pump.

Replacement FPC Connector: Ensure you have a compatible replacement part.

Flux: Helps in soldering and desoldering by promoting better solder flow.

Solder: Use lead-free solder with a small diameter for precision work.

Magnifying Lamp or Loupe: Optional but highly recommended for better visibility.

Anti-static wrist strap: To prevent static discharge that could damage sensitive components.

Samsung Repair experts in Hamilton New Zealand 937 victoria street Hamilton New Zealand 078393188

Steps to Solder a Broken FPC Connector:

Prepare the Work Area:

Work on a clean, well-lit surface with good ventilation.

Use an anti-static mat if available to prevent static electricity buildup.

Inspect the Damage:

Identify the extent of the damage to the FPC connector and surrounding components.

Prepare the Replacement Connector:

If necessary, remove any adhesive or remnants of the old connector from the PCB using a soldering iron and desoldering braid/pump.

Align and Secure the Replacement Connector:

Place the new FPC connector in the correct orientation on the PCB.

Use a small piece of double-sided tape or a small amount of adhesive (if appropriate and if it won’t interfere with soldering) to temporarily secure it in place.

Soldering Process:

Apply a small amount of flux to the pads where the FPC connector will be soldered.

Tin the soldering iron tip with a small amount of solder.

Heat the pad on the PCB and the corresponding pad on the FPC connector simultaneously.

Touch the solder to the joint, allowing it to flow smoothly and create a good electrical connection. Be careful not to bridge adjacent pads.

Repeat this process for each pad of the FPC connector, ensuring all connections are solid and clean.

Inspect and Test:

Once soldered, visually inspect the joints under magnification if possible to ensure there are no solder bridges or cold joints.

Test the functionality of the FPC connector by gently inserting the flex cable and checking for proper alignment and functionality.

Reassemble and Final Checks:

If everything works correctly, reassemble the device carefully.

Perform a final functionality test to ensure all features dependent on the FPC connector (such as display, touch, etc.) are working properly.

Tips:

Practice on Scrap: If you're new to soldering FPC connectors, practice on an old circuit board or scrap PCB to gain confidence and skill.

Patience and Precision: Take your time and avoid rushing through the soldering process to minimize the risk of damage.

Important Considerations:

Safety: Always work in a well-ventilated area and be cautious with hot soldering irons and electronic components.

Compatibility: Ensure the replacement FPC connector is compatible in terms of size and pin configuration with your Samsung device.

By following these steps carefully and methodically, you should be able to successfully solder a broken FPC connector on a Samsung device, restoring its functionality.

Not sure how to fix, bring it to applefix & tech engineers @ 937 victoria street Hamilton new zealand

[kingtechdisplay]

3.5 Inch 320x480 MCU Interface IPS TFT LCD Module

Kingtech 3.5inch 320x480 IPS/ free / all/ wide viewing angle TFT LCD display is our most leading product. Kingtech is only the distributor of the IPS LCD panel, so we have price and resource advantage.

 The 3.5inch IPS display has a resistive touch and capacitive touch. The PINOUT is 40PINs, most customers use it.

Features of 3.5 Inch 320x480 MCU Interface IPS TFT LCD Module

All/Free/Wide viewing angle··

320x480 resolution

IPS type

Support resistive touch and capacitive touch 

Support MCU 8 / 16 /18 bits

Specification of 3.5 Inch 320x480 MCU Interface IPS TFT LCD Module 

 Item 

3.5 inch 320RGB*480 TFT LCD module 

Model No

PV0350B2Z10

Resolution 

320RGB*480 

Outline Dimension 

53.76(W)*84.18(H)*3.30(T)(Exclude FPC) 

Active Area(mm)

48.96(W)*73.44(H) 

Interface 

MPU 16-bit

Viewing Angle

full viewing angle /  IPS

Driving IC 

ILI9488 

Display Mode 

Normally Black

Operating Temperature 

 -20 to +70

Storage Temperature 

 -30 to +80

Brightness

200nits

Touch panel

The resistive and capacitive touch panel

 Application of 3.5 Inch 320x480 MCU Interface IPS TFT LCD Module

 The 3.5inch IPS display can be used for medical devices, handheld equipment, industrial control, smart home, POS machine, and the black box.

https://www.kingtechdisplay.com/products/3.5-inch-320-480-mcu-interface-ips-tft-lcd-module.html

[adelaidemobilescreenrepair]

Why Not Feel Harassed for iPad Mini Screen Repair at Adelaide?

Buying the latest form of iPad may be an honorable moment for you but when it comes to of iPad mini screen repair a lot of you feel despair. Whenever you feel that there is the slightest bit of screen/LCD/display/glass issues with your iPad just the cost of it is enough to you shake in your heels.

But in reality, there is not much that you have to worry about. There is many a shop for quality iPad mini repair in AU with technicians who are more than capable of solving any of the technical issues that arise from time to time.

Just because these shops are located in a corner providing iPad mini repair near me, you should not look down on them. As not only are these repairs shops budget friendly but their uncompromising stance regarding quality makes them a favorite among all.

The experienced technicians are more than capable of resolving your multiple iPad issues like –

Camera/sensor issue

IC issues / FPC issues

Speaker, sound issues

Motherboard issues

Button issues like sound/volume/power off-on

Wet/water damage issues

Charging pin/port issues

Battery replacement

Screen/LCD/display/glass issues

Nothing goes untouched by the technicians who have long since had the best idea about the inner comings and goings of the iPad issues. Nothing baffles them as they have repaired it all and are more than ready to deal with the various problems listed above.

Here is the bunch of problems that the technicians can provide a solution against –

1.    Screen/LCD/display/glass issues of iPad mini - 

From changing the broken iPad Mini LCD repair of a fall to the other much-needed damages that occur due to temperature, water, and even pressure damage. You name it and the technicians are ready to provide iPad mini LCD screen, display repair solutions with ease.

The glass laid on top of the LCD screen is present there to protect the iPad from any damages. Now the glass can get easily shattered if too much pressure gets applied to it. The first thing that you would need to check is whether the iPad is responding to your touch. If it is, then you would need to get the iPad mini screen repair done to your iPad to get it back to its original shape.

But if your screen remains unlit after you turn on your iPad or is not functioning as it should be; you can be sure that your LCD is broken and is in need of being repaired. You would have to get it all done as soon as you possibly can at the very start when you initially start to experience these problems. Otherwise, your device would get damaged, further.

A bad LCD would hamper the display feature of your mobile. You would encounter a dark horizontal or vertical line appearing on the screen of the iPad. The left-hand part of the screen is the part that gets affected the most. Instantly you would notice a difference of color between the two parts of the screen as the left side develops a yellow hue. This anomaly gets easily noticed in a white background.

All these issues are collectively known as the iPad mini screen problems. These problems are not to be treated lightly. If you are facing any one of these above problems, then you could contact the shops who does iPad mini cracked screen repair. You should withdraw from repairing the screen by yourself as you might not be able to fix it properly. They would have the iPad mini LCD screen, display repair that would aid in repairing the iPad in a proper method.

2.    Camera/sensor issue

Most of the iPad users complain about the iPad mini camera shutter that remains closed or frozen even when the camera app is open. Not only that they also complain that the sensor does not read when they try to switch from their front camera to the rear one. All these problems are solved with ease by the trusted iPad mini backlight repair service in Australia Adelaide who is more than capable of repairing their backlight as well.

3.    Speaker, sound issues

If you are facing issues like the no sound from the iPad speaker for face time, apps, music, or problems like zero sound in head iPad mode then rest assured as everything can be solved by the best iPad mini screen repair services in the deftest manner.

4.    Motherboard issues

Also referred to as main board it is the epicenter of the entire set-up and running of an iPad. Any trouble in this part would ensure a full-stop on all functions including simple iPad calls to the running of various apps. Technicians offering online iPad mini logic board repair would be able to handle it all for you with a certain élan that is in no way lesser than the technicians at Apple repair center.

5.    Button issues like sound/volume/power off-on

If you are having trouble with the adjustment ability of the volume bar then rest assured as the local technicians of Adelaide are more than capable of providing you with the cheap iPad mini screen repair that solves all your troubles without providing relieving your pocket much.

6.    Wet/water damage issues

Accidents are not avoidable in many cases and there are scenarios when no matter what you do it is unavoidable to save your iPad from water damages. Rather than trying to solve it at have it is best to have the expert technician at Adelaide check out all the problems and provide you with iPad mini screen repair that you so desire at a very low cost.

7.    Charging pin/port issues

It is the biggest problem that is faced by most owning an iPad. Just a hint of the charging trouble is enough for most to run to the nearest shop to purchase another iPad. But it is not the most ideal solution. Just bring your iPad to the expert technicians and watch them wave their magic over it like they do with mobilescreenrepair iPad mini corner repair tool and give you, your iPad back just like it was when you first bought it.

8.    Battery replacement

There are many-a-times when you are in urgent need of a battery replacement feel scared to go to the apple store to get the original product as it costs a lot. You may then come to the place you get your iPad mini display, LCD repair, as well as the battery, can be gotten from these stores as well. The shops keep the original product and can sell them to you at a decreased cost. They offer you a discount by letting go a percent of their own profit with such ease and élan that is quite unheard of from the Apple stores.

9.    IC issues / FPC issues

If you are having trouble in the IC or FPC of your iPad then rather than panicking it is best to visit the technicians at Adelaide. Not only would they be able to solve all your problems of repair and replacing the needed source, but they would also be able to offer you with all the solutions at a very low cost. This way you would be able to get the iPad back to its original form without any major or minor delay.

The iPad mini screen repair Sydney & Adelaide is more than capable of solving all your screen/LCD/display/glass issues at a fraction of the cost of the Apple repair centers. This is because the Apple repair centers charge a certain amount in the name of the service provided thereupon which everything is included from the taxes to the charge of even the electricity used with the work provided by the technician.

It is quite understandable to worry about the cons that are often related to getting your phone checked by the local technicians. But you have to keep in mind that the word of the mouth is very powerful in making or breaking the business. Most of the technicians put in all their stakes in the business and repeat business that the good words of a customer would bring them. Doing a bad job would only get them in trouble! Thus they work had to eliminate all your problems from the get-go.

In case, you have to iPad mini screen repair something or change the screen or battery they do not provide any respite on the taxes of their own products this also increases the final bill amount. But the local technicians offer you a lot of respite of the price of the original product, and on their own labor, as well. Mobilescreenrepair.com.au brings down the total cost of the repair which turns you into, a very happy customer.

[panchalpooja-blog]

Electronic Films Market to Expand at a Steady CAGR in the Terms of Value by 2026

Global Electronic Films Market: Overview

Electronic films are highly functional films, which include materials for flexible printed circuits (FPCs) with ultra-thin copper layers; self-adhesive films; and silicone-coated films. These films offer various benefits such as chemical resistance, high-temperature tolerance, low coefficient of friction, optical transparency, conductivity, UV & weather resistance, fouling resistance, moisture resistance, high insulation, non-flammable properties, low surface energy, and low dielectric constant.

Read Report Overview @: https://www.transparencymarketresearch.com/electronic-films-market.html

Global Electronic Films Market: Key Segments

Based on type, the global electronic films market can be bifurcated into non-conductive and conductive. The non-conductive segment accounts for major share of the market, led by the high demand for non-conductive electronic films in electronic display, PCBs, and semiconductor applications. Non-conductive electronic films possess physical properties such as high-temperature tolerance, low coefficient of friction, chemical inertness, weather/UV resistance, and negligible moisture absorption. In terms of material type, the market can be classified into polymer, Information Technology Outsourcing (ITO) on glass, ITO on pet, and metal mesh. Polymer is estimated to dominate the global electronic films market in during the forecast period. Electronic films based on this material are used in various applications such as electronic display, semiconductors, and PCBs. In terms of application, the global electronic films market can be segregated into electronic displays, PCBs, and semiconductors. In terms of value, the electronic display is anticipated to be the key segment of the market in the near future. Rise in demand for large screen LCDs in residential and commercial destinations is estimated to boost the electronic display segment during the forecast period.

Request Brochure of Electronic Films Market @: https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=56250

Global Electronic Films Market: Trends & Developments

Increase in demand for tablets, smartphones, and other similar consumer electronic devices; rise in preference for touch-enabled LCD panels; and high-performance properties of polymer-based electronic films are the major factors driving the global electronic films market. High technology development & manufacturing cost of electronic films and volatility in prices of ITO are the prominent factors restraining the global electronic films market. Continuous development of application products and development of PCBS due to the expected 5G rollout are presenting growth opportunities for the global electronic films market.                 

Request For Discount On This Report @: https://www.transparencymarketresearch.com/sample/sample.php?flag=D&rep_id=56250

Global Electronic Films Market: Regional Outlook

Based on region, the global electronic films market can be split into North America, Europe, Asia Pacific, Latin America, and Middle East & Africa. Asia Pacific is anticipated to dominate the global electronic films market during the forecast period. Countries such as China, South Korea, Japan, and Taiwan are the leading producers of electronics in Asia Pacific. In terms of volume and revenue, the global electronics and LCD display market is dominated by China, Japan, and South Korea. According to the International Trade Centre, Hong Kong is one of the largest exporters of electronics in Asia Pacific due to the low manufacturing costs. This encourages producers of electronics films to shift to Hong Kong.

 Global Electronic Films Market: Key Players

Key players operating in the global electronic films market include DowDuPont, Toray Industries, Inc., Gunze Limited, Nitto Denko Corporation, Saint-Gobain, The Chemours Company, and Toyobo Co., Ltd.

[mogood]

Industrial Grade LCD Screen Interface 20pins LCD Display manufacturer

▸Type:TFT, LCD Display

▸Display Size:1.77inch

▸Supplier Type:manufacture

▸Place of Origin:Guangdong, China

▸Brand Name:XW

▸LCD Type:TFT

▸Outline Dimension:42.94X33.3

▸Driver IC:ST7735

▸Connector:COG+FPC

Our factory mainly produce LCD screen for mobile phone : samsung LCD screen ,Iphone LCD screen ,motorola LCD screen ,Xiaomi LCD screen and Tecno LCD screen ,Infinix LCD screen ,OPPO lCD Screen ,Vivo LCD screen and custom small LCD screen like 16pin ,17pin,20pin ,we have also supply SD Memory card ,Phone Tempered glass we have full production lines of these products: we have our own assemble workshop and products testing centre.we accept low MOQ and provide fast delivery for customer

[rsrmdp]

Display LCD ZKFPC-070008 V1 / WJWS070087A-FPC (no es comaptible con 31400608458)

Display LCD ZKFPC-070008 V1 / WJWS070087A-FPC (no es comaptible con 31400608458)

Flex: WJWS070087A-FPC Codigo flex compatible: ZKFPC-070008 V1 No es comaptible con: 31400608458 Tablet Compatible: Positivo BGH Twist Tab T770K

[salvationrepair]

Lcd Display Fpc Connector Compatible For Google Pixel 6 / 6A / 6 Pro / 7 / 7A / 7 Pro (On Motherboard) (60 Pin)

LCD Display FPC Connector Compatible For Google Pixel 6 / 6A / 6 Pro / 7 / 7A / 7 Pro (On Motherboard) (60 Pin)

[a-onemart]

ElecLab Raspberry Pi Touchscreen Monitor 7 Inch DSI Capacitive LCD Display 800x480 RS232/RS485 Speaker Bracket for Raspberry Pi 4B 3B+ 3B 3A+ 2B B+

ElecLab Raspberry Pi Touchscreen Monitor 7 Inch DSI Capacitive LCD Display 800×480 RS232/RS485 Speaker Bracket for Raspberry Pi 4B 3B+ 3B 3A+ 2B B+

Price: (as of – Details) Product Description Product details The audio adapter board connects the Raspberry Pi and the display to transmit audio signals Volume/brightness adjustment potentiometer, respectively adjust the volume and brightness The USB signal adapter board connects the Raspberry Pi and the USB serial port of the display, providing RS232/RS485 communication function DSI FPC…

[sorenstore]

ال‌ سی‌ دی تبلت چینی 7 اینچ 30 پین 🟢🟢🟢 قیمت خرید صفحه‌نمایش ال‌سی‌دی اسکرین تبلت چینی 7 اینچ 30 پین FPC.070102B-7V1 190829 RX همراه با چندین کیفیت موجود در فروشگاه اینترنتی قطعات ‌موبایل سورن‌استور. 🔸🔸🔸 ‏Description LCD Display china Tablet ‏LCD Display for China Tablet ‏Versions: ‏Compatible models: ‏Models: FPC.070102B-7V1 190829 RX ‏Manufacturer part description: Display LCD, No Frame, With Frame Housing ‏Alternative names: Replacement LCD-screen including touch panel, digitizer ‏PRODUCT INFORMATION ‏Part Number: ‏Parts: LCD Display ‏Mobile Spare Parts ‏ Brand: China Tablet ‏Consists of: China Tablet FPC.070102B-7V1 190829 RX ‏Condition: Original, New, Copy, High Copy, Select Option Quality ‏Quality: 100% Brand New, Original, High Copy, Copy, Second Hands ‏Packing: Official China Tablet Service Pack, Soren Store 🔸🔸🔸 #tablet #chinatablet #chinatools #chinaparts #lcdtablet #mobileparts #30pin #7inch ‎#تبلت ‎#قطعات_تبلت ‎#تبلت_چینی ‎#لوازم_چینی ‎#چینی ‎#۷اینچ ‎#۳۰پین ‎#نمایشگر ‎#صفحه_نمایش ‎#پنل ‎#ال_سی_دی_چینی ‎#صفحه_چینی ‎#تبلت_دانش_آموزی ‎#وسایل_تبلت ‎#لوازم_تبلت ‎#قطعات_موبایل ‎#لوازم_جانبی ‎#ابزار ‎#لوازم ‎#فروشگاه_سورن ‎#سورن_استور ‎#سورن (at بانه Bane) https://www.instagram.com/p/CU2uen8A3PJ/?utm_medium=tumblr

[rethericentel]

For FPC-55Q054H0-A LCD Display No Touch Screen Digitizer Sensor Replacement With Tools

For FPC-55Q054H0-A LCD Display No Touch Screen Digitizer Sensor Replacement With Tools

Buy from Aliexpress.com : https://s.click.aliexpress.com/e/_puSAnWN

For FPC-55Q054H0-A LCD Display No Touch Screen Digitizer Sensor Replacement With Tools