#plasterboard panel hoist | Explore Tumblr posts and blogs

wellthatfailed · 6 years ago

Photo

Professional Drywall Installers Ensure the Perfection

Drywall is also known as wallboard, gypsum board, and plasterboard, etc. Drywall has taken the place of the plaster wall. Because it is more convenient in every sense. It is long-lasting, less-costly (because installation is easy), fire-resistance and has an ability to reduce noise.

There are many professional drywall installers working in San Fernando Valley CA who take the responsibility of installing the drywall in the best professional manner, low costs and least time.

A drywall is generally made up mainly of gypsum, which is wrapped in several layers of, particularly, recycled paper. Layers and layers of paper and gypsum are sandwiched to make drywall. There are other compositions of drywall too for different environments, for example, there are some specified high moisture resistance walls too which can be used where the use of water is in more quantity.

Getting Assistance of Professional Drywall Installation Services

The drywall installers assist you in selecting the rightly thick drywall for your place. Then, they can also help you in selecting the particularly composited wall for some specific area. For example, ‘green rock’ can be used in places like bathrooms, pantries, and garages.

Then, they will prepare the decided wall area for the installation. Their professional installation-preparation skills will ensure the removal of any kind of leftover of the old wall i.e. nails, studs or uneven lumps, etc. Along with the external removal of old-wall-leftovers, they will also professionally detect any other internal problems too. For example, they will detect that if there is some problem present related to leakage or lose blocking, etc., which will be addressed first.

Then the professional installers will do all the measurements, gluing and taping. After this, they will do the hoisting of the drywall panel and screw it there. Then, the professional installers will cut the drywall according to their expert measurements and cutting skills by using correct tools. Then the installers will glue the wall are just right before pasting the drywall on it. Along with this, they will also cut the needed parts of drywall with a saw. Then, the mudding and taping of the drywall will secure the placement. In the end, the installers will do the finishing and sanding.

This is simply the whole basic process of drywall installation which most of the drywall installation services.

#drywall installation #drywall installation tips #drywall installers #home improvement #construction

0 notes

airitastethers · 6 years ago

Text

What Are the Most Common Injuries from Falling Tools?

New Post has been published on https://www.airitas.com/what-are-the-most-common-injuries-from-falling-tools/

What Are the Most Common Injuries from Falling Tools?

Injuries from falling objects are one of the most common hazards encountered in construction. They are also one of the easiest to avoid. Falling objects can range from small tools to larger items such as steel beams. Unfortunately, most contractors tend to belittle the dangers caused by falling objects, believing that a small object could not cause serious injury.

Injuries caused by falling objects range from relatively minor ones such as bruises and lacerations to more severe injuries such as concussions, back and neck injuries, and broken bones. At worse, these incidents can result in paralysis, traumatic brain injuries, permanent disabilities, and death.

According to the Bureau of Labor Statistics, there are about 50,000 “struck by falling object” incidents recorded by OSHA every year. This means that there is approximately one injury from this cause every ten minutes. And there are probably many more incidents that go unreported.

One example of a fatality caused by falling objects involves the death of 58-year-old Gary Anderson in New Jersey. Anderson was delivering plasterboard to the site of a luxury high rise under construction when a tape measure struck him.

The tape measure had slipped from the belt of a worker working 50 stories above Anderson. It bounced off a piece of equipment ten feet above the ground before hitting him and knocking him unconscious. He suffered a cardiac arrest and later expired in a hospital.

While these incidents are fortunately rare, they serve to highlight how potentially dangerous falling objects at construction sites can be. They can also be easily prevented with some simple precautions being taken.

Prevent injuries from falling objects

There is a number of basic measures that workplaces can implement to prevent injuries from falling objects. These include:

Tethers and tool lanyards. These will ensure that tools are securely attached to a worker’s tool belt or harness and prevent them from falling. Workers should always secure their tools while they are at the worksite.

Barricades. These should be set up on the perimeter of exclusion zones to prevent workers from entering. If barricades are not feasible, then overhead protective structures should be used.

Warning signs should also be placed around these areas. When workers see people wandering near these sites, they should also be instructed to give them verbal warnings.

Grating covers. Even placing a piece of non-slip plywood to cover an open grating can prevent tools from falling through it.

Toeboards. These are installed on guardrails and prevent dropped tools from falling to the level underneath. In addition, if you pile materials beside guardrails that are higher than 3.5-inches, place screening or plywood panels on the guardrails to prevent small debris from falling through them.

Carts with sides. These will help ensure that what is placed on them will not accidentally fall off. If you have to place a load on a cart that extends over its side, make sure to tie it down or otherwise secure it.

In addition, these best practices can be implemented in the workplace to avoid falling object accidents.

When hoisting, make sure that the operator does not swing, lower or lift over someone’s head. If the operator’s view is blocked, a spotter should assist him in avoiding accidents.

Tools and other equipment and materials should be kept away from the edges of elevated surfaces. Materials should always be stacked on a stable, flat surface.

Materials and equipment should be kept at least six feet away from the edge to avoid tipping. These should also be arranged so that they don’t slide or roll in the direction of an opening.

When working at a height where there is strong wind, always tie down or otherwise secure materials and equipment.

When removing something from a secured pile, make sure to re-secure the pile afterward.

Workers should maintain the cleanliness of their work areas. After a tool is used, it should be put away and not left lying around. Debris and other messes should be promptly cleaned up after work.

Anyone who is at a site where there is a risk of falling objects should wear hard hats and other protective equipment. If there are visitors, they should be accompanied by employees who will escort them and prevent them from entering potentially hazardous areas.

0 notes