#spanner holders

[toolboxwidgetuk]

Hey fellow gearheads! If you're anything like me, you know the struggle of keeping your toolbox organized, especially when it comes to those elusive spanners. Today, let's dive into the world of spanner holders and how finding the right one can make a mechanic's life a whole lot easier.

[columboscreens]

[gallifreyinstituteforlearning]

How old was the oldest time lord?

How old was the oldest Time Lord?

This is one of those "it depends" questions:

👑 Rassilon

The record holder for age is probably Rassilon, who's been lingering in various forms for at least 10 million years, probably even a billion. However, there are big question marks over how much of that time was spent using all sorts of trickery and tech to extend his physical and mental lifespan, so it isn't exactly natural or reliable.

🎓 Professor Chronotis

If we ignore those who used such dubious methods, another contender enters the ring: Professor Chronotis, aka Salyavin. He lived to 12,000-13,000 years (impressive, even for a Time Lord) and retired peacefully on Earth, without reportedly dabbling in any artificial life-extension techniques.

📜 Spanners in the Works

Then there's this wild claim from a Time Lord named Handrel, who stated that each incarnation could live for up to 10,000 years, meaning a potential lifespan of 130,000. But in reality, we've never seen any Time Lord naturally reach that number.

Of course, we can't forget to mention the Timeless Child, who could potentially be over a billion years old—though for any kind of conclusive answer to that, you'll have to consult Professor Chibnall.

🏫 So ...

Rassilon technically holds the record for just refusing to die, but if you're after a more 'natural' example, Professor Chronotis, at around 12,000-13,000 years old, takes the crown.

Related:

🤔|🧬👵How do Gallifreyans age?

📺|🧬👵Converting Gallifreyan Age to Human Years

💬|👤👑Why is Rassilon everywhere?: Who Rassilon is and why he’s so important.

Hope that helped! 😃

Any orange text is educated guesswork or theoretical. More content ... →📫Got a question? | 📚Complete list of Q+A and factoids →📢Announcements |🩻Biology |🗨️Language |🕰️Throwbacks |🤓Facts → Features: ⭐Guest Posts | 🍜Chomp Chomp with Myishu →🫀Gallifreyan Anatomy and Physiology Guide (pending) →⚕️Gallifreyan Emergency Medicine Guides →📝Source list (WIP) →📜Masterpost If you're finding your happy place in this part of the internet, feel free to buy a coffee to help keep our exhausted human conscious. She works full-time in medicine and is so very tired 😴

[fanficwritinggirl]

Chapter 6 - Mistake (My Montana)

Hot balls of oil spit underneath the bacon as it sizzles in the pan on the stove, the smell filling the house as it cooks. Cooked bacon was what woke Josie from her deep slumber, having no recollection of even falling asleep. She carries herself down the stairs, the need for food becoming more imminent. Hattie stands at the stove, the tip of a spatula placed on the bacon as she presses on it.

"You know that's not going to make it cook quicker right," Josie tells her as she passes behind her and to the coffee maker. Hattie smirks.

"It's cooked, I just want it to get some colour. Colour adds..." Josie looks over her shoulder and cuts her off. "Flavour, I know. I swear I hear you bang on about it every time you cook food," Josie fills her mug and walks over, planting herself in a chair at the table taking a sip of her black coffee, grabbing a slice of toast that was sitting between the metal wires of the toast holder. Hattie, having taken the bacon the pan, follows behind her, plate of bacon in hand.

"Well seeing as I don't cook that often, it's surprising that it has stuck with you as much as it has," Hattie comments as she takes her own slice of toast. Josie smirks, raising an eyebrow as she chews on her toast and swallows.

"I think that because of the rare insistence that you cook, the memories stay with me more," the room falls into silence, though smiles are both present on their faces.

"I don't remember falling asleep, it was like I passed out," Hattie nods at the comment, taking a sip of her tea.

"Yeah. I ended up coming back late, got called out to the Bennetts ranch due to a calf being breached, and had to do an emergency C-section."

"Did they survive?" Josie's eyebrows were knitted together in concern. Hattie shakes her head a bit and sighs.

"Mama was fine, but the calf died, there wasn't enough oxygen. Mr Bennett was able to get a surrogate calf from Mr Myers farm," Josie nods, understanding that, that was a normal thing in farming, stock died, it's mother nature. The room returned to silence again, a pause in the conversation as one topic needed for discussion, hanging in the corner of the room, waiting to be discussed.

"So... are we going to talk about what I walked in on yesterday?" Hattie purses her lips slightly as she glances at her niece from the corner of her eye. Josie places her mug down, cradling it in between her hands as she ponders her words.

"What do you want to know?" Josie asks quietly, causing Hattie to laugh, her hands lifting into the air a little as her face lifts.

"Oh, I don't know what is going on between you and Cole," it was such an obvious question and Josie didn't quite know how to answer it.

"There is nothing going on between us," Josie tells her aunt truthfully, Hattie's eyes lift in disbelief. Josie puts her hands out.

"No, I am being serious. Nothing is going on," Hattie leans back in her chair and crosses her arms.

"SERIOUSLY!" she shouted, and Josie couldn't help but groan.

"Yes, seriously."

"What is your guy's problem?" Hattie's hands untangle themselves and she places them on the edge of the table. "I mean come on, you were clearly having a moment before I interrupted," Josie scrunches her eyes up and nods her head.

"Yeah, you did. Thanks for that."

"Sorry."

"But I mean..." Josie brushes her hair back and she slides them over her head and rests them, connected, behind her neck. "He came over, we had hot cocoa, ended up having a water fight and then next thing I know, he is pulling me to him, and we are dancing in the kitchen. And it has just thrown me into a spanner, Aunt Hat. I mean what does this mean?" Josie spirals and all Hattie can do is place her hand on the younger girl's forearm.

"Hey. Listen to me, okay. I don't know what this means," Josie's face drops, and Hattie puts her free hand out. "But I think it's safe to say that there are clearly some feelings there from Cole's side. But clearly, he is not very good at expressing, verbally, what he is feeling," Josie scoffs.

"Oh, you can say that again," she takes a sip of her coffee and Hattie sighs.

"Look all I know is that there is something between you and Cole, and one of you need to grow a pair and say something, because at this rate you two are going to drive me to drink, and I already have 101 reasons to become an alcoholic as is," Hattie comments and Josie smirks at her aunt's antics, her face quickly changes as she leans back in her chair, her face becoming serious.

"It's just... my nightmares, me mentally right now, Danny. these things I take into consideration before starting a relationship. If there is a relationship to start."

"But what about what June said about being happy. Allowing yourself to be happy and that it might help the nightmares to become less severe. And I'm sure Danny isn't as blind as you think to what is going on between you and Cole," Josie snickers.

"Trust me, I love Danny, but he sometimes can be so oblivious to what is going around him, he almost deserves a medal for it, though I can't blame him. I mean when you have that big of a family and you are seeing and hearing about all the shit that is going on with them, I can't really blame him for not seeing it."

"Doesn't mean that the others haven't," Hattie comments and Josie smirks, shaking her head.

"Yeah, Alex. Guess he is the best perspective. But that is just because he watches every detail of Cole's life, waiting for him to slip up so that he can hold him to it forever. Not letting him forget the little mistake he has made. It's toxic," Hattie nods.

"Yeah. These two together have never been a good mix. Sometimes siblings are just made to argue, and that is Cole and Alex," Josie smiles.

"Where you and Mom like that," Josie asks and Hattie laughs as she reminisces.

"Oh, your mother was a pain in my ass. In a good way," Josie laughs. "She used to steal my clothes a lot when she started dating... you know," Josie smiles drops and looks down at her mug and nods understanding what her aunt was insinuating.

"And next thing I know, she was married and out of the house and moved to another state. And I would do anything to have one more day to argue with her," Hattie's voice cracks and Josie can do nothing but stand up and wrap her arms around her aunt in a hug. Hattie smiles as she wraps her arms around her niece.

"Hey, none of this now. Too early for this now. Why don't you go and get ready for the day. I'm sure the boys will be here soon to pick you up. You sure you don't want me to drive you?" Josie pulls away and shakes her head.

"No, it's your day off. Go back to bed, sleep some more and relax. I'll be fine," Josie tells her before putting her plate in the sink and running up the stairs. Hattie sat and sighed as she took a sip from coffee.

"God please let her be okay, and figure everything out. For my sake and your Aub," she speaks to nothing but herself.

————————————————————

Josie hated chemistry. She really did, like how was she going to be able to use this in her life. Yeah, she might not know exactly what it is she wants to do yet but she knows one thing, chemistry is not going to help her in any case.

"Okay class, can anyone tell me the atomic structure of oxygen," Josie puts her head down, continuing to doodle at the corner of her page.

"Anyone? Josie why don't you tell us," Josie lifts her head, eyes wide.

"Umm...it has protons and electrons," she states dumbly.

"Correct and how many protons and electrons are there?" The teacher asks her and Josie was stumped. A foot hits her, under the table and she turned and Danny has written on the corner of his page the answer.

"8 protons, 8 neurons" the teacher smiled and nod.

"Correct well done Josie," they moved on and continued the lesson. Danny nudged her with his elbow and she looks at him again.

"You okay?" Her lips lift up a little and she nods.

"Fine."

"You sure, you keep zoning out," Josie nods again.

"I'm fine, just tired. And it's doesn't help that chemistry makes absolutely no sense to me," Danny nods understanding where she was coming from.

"I know she is a few grades below up, but I heard that Jackie is quite good at science. I think she's in advanced classes. Maybe you could ask her to give you some help you know," Josie sits there and thinks about it. It would be useful, with Jackie living at the Walters and all, it not like Josie isn't there herself most of the time.

"Yeah, yeah. I think I will."

"So how was yesterday," Josie chokes on her water, coughing as she tries to catch her breath.

"Wow," Danny hands her a napkin and she wipes the drops of water running down her chin.

"Thank you," Danny chuckles before shoving some food in his mouth.

"So, how are you feeling after yesterday," Danny asks again and Josie nods her head, eating her food.

"Yeah, you know. Tiring, you know what June is like she doesn't leave any stone unturned. You would think after me going to her for so long she would have less to weave through," Danny shrugs.

"I don't think therapy is ever meant to be easy," Josie snickers at the comment.

"You can say that again," the pair chuckle between themselves. Josie eyes trail behind Danny and she sees a certain blonde waltzing in. She freezes for a moment as their eyes meet, he slows for a second, taking a longer look at her before he tears his eyes away from her, his eyes now falling to the floor and walking towards his friends. He slides in next to Erin, his arm draped over her shoulders as she turns and smiles up at him. Josie bites her tongue as she takes a breathe and looks down at her food. She should have known better.

"Hey, I'm going to go and see Miss Jacobs quickly before lunch ends," Danny looks confused.

"Yeah okay, is everything okay?" Josie nods as she grabs her back.

"Yeah fine I just remembered I needed to ask her something. See you in class," and then she was out of the door before he could say anything else.

[jaibros-tool]

Tips to Maintain Your Tools

Easy Ways to Keep Tools in Good Shape

Tools are part of daily work in every shop, factory, or small garage. A tool helps in cutting, drilling, fitting, or fixing. But if not taken care of, even the best tool can stop working well. That’s when problems begin, slow work, bad finish, or even broken parts.

Looking after tools is not difficult. Just some easy steps can keep them working like new. This saves both time and money. Below are very simple ways to keep tools safe and strong for a long time.

Clean Tools After Use

After finishing any job, tools must be cleaned. Dust, grease, and metal bits get stuck during use. If left as it is, they damage the surface. Tools also lose their shine and sharpness.

Wipe each tool with a clean cloth. Use thinner or kerosene if needed. Machine parts like CNC insert must be wiped well, especially the edges. Even a small bit of dirt can affect the cut. Clean tools always work better and last longer.

Keep Tools in Dry Place

Water and moisture cause rust. Rust makes tools weak and rough. Sometimes the tool looks fine outside but is already damaged inside.

Tools should be kept in a dry place. Cupboards, drawers, or tool boxes must stay free from water. During the rainy season, tools need extra care.

Tools like CNC tools must be packed with care. Foam trays or sealed boxes help keep them dry. Tools kept dry stay in good shape for years.

Use the Right Tool for Each Job

Each tool is made for a special job. Using the wrong one can spoil the tool and also the material.

Don’t use a small spanner on a tight bolt. Don’t cut thick metal with a thin blade. In machine work, don’t use a CNC insert meant for aluminium on steel.

Right tool = good job. Wrong tool = damage.

Do Not Drop or Throw Tools

Tools are made of strong material. But if dropped, they can break, bend, or lose balance.

Always place tools gently on the table or toolbox. Sharp tools should not touch each other. Keep small parts away from the edge.

Tools like CNC tools are very sharp and delicate. If they fall, even a tiny crack can affect the machine job.

Keep Cutting Edges Sharp

Blades, cutters, and drills must stay sharp. A blunt tool takes more force and gives a bad finish.

Check sharpness often. For small tools, use a file or sharpening stone. In case of machine tools, like a worn-out CNC insert, replacement is a better idea.

Sharp tools save time, give clean results, and are safer to use.

Oil the Moving Parts

Some tools have hinges, joints, or sliding parts. These must be oiled sometimes. Oil helps smooth movement and stops rust.

Just 1–2 drops of oil are enough. Wipe off extra oil with a cloth. Too much oil attracts dirt.

Even holders and clamps used with CNC tools work better with light oiling. It helps tools stay tight and smooth during work.

Dry the Tools Before Keeping Them

After cleaning or oiling, tools must be made dry. Water on the tool can start to rust. A dry cloth should be used after every wash or wipe.

Never store a tool when it is still wet. Sharp edges rust faster than other parts.

In machine work, CNC insert must be fully dry before putting it into the holder. Even a small water drop can affect the cut or tool life.

Check Tools Weekly

Sometimes a tool looks okay but is damaged inside. A loose handle, bent tip, or tiny crack can lead to breakage while working.

Each tool should be checked once every few days. Look for signs like wobble, rust, or dull edge. Fix small issues quickly.

Machine tools like CNC tools should be checked before every shift. A small chip can spoil the machine job or hurt the part.

Store Tools Neatly

Scattered tools get lost or broken. They also become hard to find during work.

Tools should be kept in order by size, type, or use. Use trays, boxes, or racks. Keep heavy tools in the lower shelves and sharp ones wrapped in cloth or foam.

CNC insert sets should be stored in labelled boxes. Keep each type separate. It saves time during fitting and avoids damage.

Change Tools That Are Damaged

No tool lasts forever. After long use, tools get weak, loose, or stop working well.

If a drill slips, a blade shakes, or a CNC insert gives bad finish, change it. Damaged tools slow down work and can be risky.

New tools work better and give peace of mind. Changing on time is always cheaper than repairing after damage.

Help Others Follow These Habits

In workshops, many people use the same tools. One careless person can spoil the tools for all.

It helps to put up small signs , "Wipe Before Keeping", "Handle with Care", "Sharp Tools Separate". These small tips remind everyone to follow the right habits.

When everyone looks after tools, the full team benefits.

Final Words

Good tools are like silent helpers. They make work fast, clean, and easy. But tools also need care.

No need for fancy machines or big money. Just clean, dry, store, and check. These 4 habits keep tools strong and smooth.

This is true for all kinds of tools, from spanners and drills to advanced CNC tools. Even machine parts like CNC insert give the best result when they are clean, sharp, and stored right.

Many buyers trust Jaibros for quality tools that last. Their hand tools, power tools, and machine parts are trusted by workers, engineers, and shop owners.

Good care + good tools = good work. Always.

[onlinecoursesbylearnkarts]

What are the Career Opportunities After Earning the GCP Architect Certification?

GCP Professional Architect Certification is a globally recognized badge of honor. The certification demonstrates the ability to design, build, and manage secure, scalable, and reliable GCP (Google Cloud Platform) solutions. As the IT world has shifted to the cloud computing side of things, GCP Architect certification holders are in demand. It can open a variety of job venues in diverse areas of study.

Cloud Architect

It is the job of a GCP Professional Cloud Architect to come up with cloud infrastructure options that meet the needs of businesses. Cloud architects help companies make sure that their cloud operations are fast, safe, and cost-effective. As more companies use Google Cloud, certified workers can get well-paying jobs in companies all over the world.

Cloud Consultant

Businesses making the shift to cloud solutions need professional consultants to guide them���with cloud migration and digitalization. The Google Professional Architect certification prepares you to analyze client needs and design solutions that make a seamless cloud transition.

DevOps Engineer

DevOps engineers integrate Cloud automation tools, CI/CD pipelines, and infrastructure as code (IaC) to streamline software development and deployment, making them suitable for Google Cloud Architect Certified professionals. Strong DevOps technologies offered by GCP (Cloud Build, Cloud Run) make certified professionals strong candidates for organizations.

Cloud Solutions Engineer

Cloud Solutions Engineer is a position ideal for a Google Cloud Professional, who is skilled at cloud application designing and optimization. They support developers in making infrastructure and cloud services seamlessly.

A Site Reliability Engineer (SRE)

SREs manage the reliability, scalability, and efficiency of systems. Google Professional Cloud Architect is the major responsibility of building fault-tolerant architectures, and improving cloud performance, and making sure operations run smoothly in high-traffic settings.

Data Engineer

While GCP emphasizes data processing and analysis more, you can focus on data engineering with GCP Architect Certification. They use Google BigQuery, Cloud Spanner, and Dataflow to handle large-scale data pipelines. This facilitates better decision-making for data-driven organizations.

Security Engineer

Safe cloud architecture is essential, and certified architects know how to do that. For example, there is the Google Certified Professional Cloud Architect, who specializes in the realm of cloud security, ensuring that compliance requirements, identity management, and risk mitigation all stay covered in cloud environments.

GCP Architect Salary and Demand

The salary of a GCP Cloud Architect can be as low as $140,000 and as high as $180,000, according to industry reports, but the range depends on their expertise and employer. It is a good job option, as companies such as Google, Amazon, Deloitte, Accenture, and IBM are hiring in numbers with GCP Architect Certification.

Industries That are Hiring Google Cloud Architects

Technology & IT Services – Companies like Google, Microsoft, and IBM are constantly looking for GCP-certified architects for cloud infrastructure initiatives.

Finance & Banking – Google Professional Cloud Architects are also in demand for fintech businesses and banks, requiring secure and scalable cloud solutions.

Healthcare – Google Cloud Architect Certification training programs have made the role of holders in the healthcare industry more essential due to the implementation of cloud technology.

E-commerce & Retail – Cloud architects help online businesses get the most out of their web performance, manage high-volume data, and enhance the user experience.

Career Advancement and Growth Potential

By acquiring specializations in AI/ML, security, and big data analytics with a Google Cloud Architect Certification, professionals can fast-track their career growth. Certifications, such as Google Certified Professional Cloud Security Engineer or Google Certified Data Engineer, also help widen career opportunities.

Final Thoughts

Mastering the GCP Professional Architect Certification enhances career opportunities in cloud computing, including cloud architecture, security, DevOps, and data engineering positions. With organizations rapidly adopting Google Cloud, those with Google Cloud certifications get an advantage in the job market along with future career development in the ever-evolving cloud industry.

[toku-explained]

The Rainbow Alchemist

New Generation Stars: Yuka is excitedly working on the Sevengar Enhancement Plan, believing it will create the ultimate SAA Unit. Troubled since she first made the proposal, Ediom insists on showing her the time UPG were forced to utilise the Victorium Cannon. Yuka is horrified at being forced to witness this, and Ediom then shows her the result of the cannon's hijacking by evil, VictLugiel. In shock, Yuka can only stare at the King Joe model.

Gotchard: At the academy they try to find where Hotaro and the egg went, Minato and Kyouka explaining that they'd speculated Kudo Fuga had hid Chemy 101 inside the Gotchardriver, but this was their first confirmation of this, while Renge is blaming herself for both Hotaro and Hopper1's fate having brought up the legend. Hotaro's mother worries if he'll be alright with the rain. The egg greets Hotaro, explaining how it had helped him until now, but states it is unborn, and encourages Hotaro to stay inside itself, and be safe. Spanner arrives at the egg, Gigist interrupting, telling him his Black Flames come from him so he should join him, which Spanner outright rejects. Rather than face Valvarad himself, Gigist snatches MaCentaurus, VanFenrir, HaoDin, GinGriffon and DonPoseidon, and merges them into the Fantastic Malgam. As Valvarad battles, Minato and Sabimaru attempt to analyse the egg, but Kyouka can find no way in. Renge encourages Rinne to stop self-pitying and act like she normally does, and Majade joins the battle. At this point Gigist teleports all combatants away so he can attempt to forcefully draw the egg out. The egg tells Hotaro it is scared of the dangers in the outside world, and when he gets hungry produces an illusion of his mother and Kitchen Ichinose to make him an Omurice. Recognising TamaGon's own curiosity, Hotaro makes one for it while explaining he does need to go back, and after eating, TamaGon agrees to continue fighting with him, entering a card. Gigist is shocked when the egg explodes and the contents fly off in a rainbow, just managing to save Spanner and Rinne from the Malgam. The egg hatches into NijiGon, and agreeing to fight, separates into two Chemy Cards, allowing Hotaro to attach NijiGon to the Gotchardriver and becomes Rainbow Gotchard, immediately letting off a wave of rainbow energy that reaches the academy and the Chemy's lifeless bodies. Rainbow Gotchard is able to make efficient use of alchemy to defeat the Malgam and rescues Chemies, and as the revived Hopper1 rushes up, alongside Kyouka carrying SkeBows and AntRooper, everyone has renewed hope for their future.

Boonboomger: Chassiro is at the aquarium only to run into Mira, explaining as a lifetime passed holder he intends to get Boonboom Marine to open up to him, rejecting unsolicited advice about Genba. The Sanseaters are scolded by Cannonborg for relaxing in the sun, Itashar hurriedly creates a refrigerator Kurumajin, Cannonborg stops them joining it, holding out the Boonboom Igniter. After the seal show, Chassiro tells Mira how once his work had him constantly on edge, but he stumbled on the aquarium and it helped him relax, so he makes sure to make time to come on occasion. The Kurumajin appears, and they go to fight it, only for the Sanseaters to roll up in the Boonboom Killer Wagon, which immediately converts to Boonboom Killer Robo, in a new heavy assault customisation. Chassiro insists on handling the Kurumajin to protect the aquarium and earn Marine's respect, so the others form Boonboomger Robo Police to fight Killer Robo. Unfortunately Killer Robo outspeeds them and stops them switching to Knight, and the Kurumajin blocks attacks and overpowers Chassiro. Mira goes to defend him, with a tire chain from Genba, and yells at him for being so willing to throw his life away, snapping him out of his single mindedness and informing Mira she's earned his respect, they then, as Marine observes, use aquatic themed techiques to break through the Kurumajin. Marine acknowledges Chassiro, and they break the others free of Killer Robo, using Safari and Marine to form Boonboomger Robo Monster to defeat Killer Robo. Later, as everyone talks, Marine rejects Chassiro's offer of flowers.

[fridgewaterfiltermelbourne]

How Water Filter Spare Parts Can Be Cost-Effective Solutions for Users?

Replacing water filter spare parts such as countertop tap adapter, cup holder, half-moon housing spanner, under sink plumbing kit, bracket and fittings, and more, within a certain time in maintaining the efficiency and longevity of water filtration systems. 

Using top-quality spare parts including water filter cartridges in Australia, is a cost-effective solution for sustained performance of the water filters, extending their self-life and saving money on unnecessary repairs or new purchases. 

Reputable sellers offer replacement parts so that customers can benefit from clean water without going over budget or adding to unnecessary technological waste; they also, can resolve particular problems, increase the system's longevity, and encourage simple maintenance.

Significance of Using Spear Parts of Water Filter Systems:

Using authorised and dedicated spare parts from renowned suppliers is important because they can fix many problems related to the functionality of the filtration system, extend the life of the filtration unit, and ultimately save money by avoiding the replacement of the entire unit.

Additionally, compared to the investment of a whole water filtration unit or a large part, small spare parts replacement from branded suppliers and regular maintenance are more affordable and cost-effective to continue the functionality and longevity of the spare part.

In addition to buying spare components, consumers can choose to replace one particular section of the water filter, such as the filter cartridge, O-rings, or tubing, when it breaks down or wears out, instead of purchasing a brand-new filtration device. This reduces electrical waste and saves money, also an environmentally friendly and sustainable approach.

Furthermore, recognised suppliers guarantee that their spare parts are cost-effective, and come after testing and quality assurance for full functionality. The system also keeps functioning properly by performing routine maintenance and replacing worn-out components on time, giving users clean and safe drinking water. 

How to Find a Recognised Spare Part Supplier in the Local Market?

People should select a reputable local provider to buy required spare parts, filtration cartridges, household water filters, water filters for caravans and other commercial needs.

Do some research before making any buying decision, visit stores online or offline to check their collections, product ranges, warranties and customer support.

Additionally, check their reviews and feedback from their clients, about the quality of their products and services. 

Look for certificates or affiliations that demonstrate adherence to quality standards. Consult with experts in the field or other customers who have had good experiences. 

Ask their customer support to make sure the supplier meets the specific demands and confidently select a reputable spare part seller in the local market. 

Source

[talencotrading]

16-piece Sounion tool box, black

Tool box with sliding mechanism locking system includes carpenter's hammer, 3.5m measuring tape with locking feature, spanner, cutter with locking feature, three-way leveler, 8 hex keys (1.5-6mm) in holder, long-handled pliers, wire cutter, voltage testing screwdriver, 4 precision screwdrivers (flat and Philips )and a screwdriver handle with 10 parts (PH, PZ, table, hex and adapter) in a holder. ABS Plastic Pad printing - upper panel - 70 x 30 mm - max color : 4.Selected label:No markingtampopainatus yläpaneelitampopainatus eteenlinssitarra yläpaneelilinssitarra eteenpyöreä silkkipainatus yläpaneelitampopainatus taaksetarra yläpaneelitarra eteenNumber of marking colors:1234Amount:pcs

44.13€ 44.13pcs (VAT 0%)

[toolboxwidgetca]

The organization plays a crucial role in enhancing productivity and Efficiency in any workshop or garage. A Magnetic Spanner Wrench Holder is a simple yet effective tool that can revolutionize your workspace. By securely holding spanner wrenches through magnetic force, this tool ensures quick and convenient access to your tools while maximizing organization and Efficiency.

[toolboxwidgetuk]

Elevate your workspace with our top picks for innovative spanner holders. Streamline your toolkit, enhance accessibility, and bring professional precision to your projects.

[toolsbelt]

Work Tools Belt DIY Scaffolding Electrician Multi Pockets Tools Holder

5 Tools Organizer

Tape holder, Level Holder, Double Frog, Triple Frog, Multi Tools Pocket / Mobile Holder

Leather & Nylon Tool Belt 2 in 1

2 inches width

easy fit adjustable waist

DShape rings for lanyard attachment

[superfastdriver]

Everyone should have a minimum tools to complete even one simple job at home. Just because every time when you are doing some repair at home you need something and always something (tools) is missing the too lbax are perfect for everyone . In this video I will show you one of the best home repair kit set - Makita P-90532 . The P-90532 is the complete home repair kit from Makita. This is a versatile tool and accessory kit in a quality carry case for a work site or a garage. Comprising of 227 pieces it contains all the parts necessary to complete the job to the highest standards.Makita P-90532 is the perfect Mechanics Tool Set and for your garage with full set of tools you can easily reach each point of your car . The high standard of Makita is transferred in this Mechanics Tool Set as well . Made in Japan , this Makita repair kit is fully fit for every home job. The toolbox has an excellent range of screwdriver bits and accessories . Professional socket set. All pieces stay very well in the box. Makita tool box P-90532 comes with great sturdy case with excellent quality . The durable case , doesn't take a lot of space and looks perfect with the Makita logo name on the top side . The tool box have lock with 2 keys. As I said Makita Mechanics Tool Set P-90532 kit comprises of 227 pieces it contains all the parts necessary to complete the job to the highest standards. Overall the tool set Makita P-90532 is Ideal for both professional or DIY use . Consider the total of high quality pieces 227 in the box the Makita price is just perfect. Please see all 227 pieces below :

12 No. Combination wrench, CRV, Size: 6/8/10/11/12/13/14/15/16/17/18/19MM

8 No. Folding HEX key wrench, CRV, BLACK OXIDE, SIZE: 1.5 ~ 8MM

Bit driver with magnetic tip, Carbon steel

1/4"DR. ( 72T ) & 1/2" DR. ( 72T) Streamline ratchet handle

10 No. Nutdriver, 50BV30, sandblasted finish, SIZE: 5/5.5/6/7/8/9/10/11/12/13MM

13 No. 1/4”DR. Socket, CRV, SIZE: 4/4.5/5/5.5/6/7/8/9/10/11/12/13/14MM

11 No. 1/2”DR. Socket, CRV, SIZE:15/16/17/19/20/21/22/24/27/30/32MM

1/4”DR. Coupler, CRV

5 No. 1/4”DR. E-Socket CRV SIZE: E4/5/6/7/8

6 No. 3/8”DR. E-Socket, CRV, SIZE: E10/11/12/14/16/18

3 No. 1/2”DR. E-Socket CRV SIZE: E20/22/24

6 No. 1/2”DR. Spark plug socket, CRV, SIZE: 16/21MM

1/4”DR. Spinner handle, CRV

2 No. 1/4”DR. Extension bar, CRV, SIZE: 2" & 4"

2 No. 1/2”DR.xtension bar, CRV, SIZE: 5" & 10"

1/4”DR. Sliding T-Bar, CRV

1/2”M X 3/8”F 3 Way socket adapter

1/4"DR. & 1/2" DR. Universal Joint, CRV

29 No. 30MM (L) BITS, S2 sandblasted, SIZES: SLOTTED: 6/6.5/8MM ; STAR: T25/27/30/35/40X2/45/50

Star with hole: T27/30/35/40/45/50

Phillips: PH1/PH2/PH3X2/PH4X2

Pozi: PZ1/PZ2/PZ3X2/PZ4X2

60MM & 80MM Magnetic holder

120MM Flexible Magnetic holder

30 No. 25MM (L) BITS, S2, in plastic box Sizes: Slotted: 3/4/5/6; Phillips: PH1/PH2/PH3/PH4;

80 No.25MM (L) BITS, S2, IN 8PC Plastic holders, Sizes: STAR: 8/9/10/15/20x5PCS/25x4PCS/27x4PCS/30/40, Star with hole: T8/9/10/15/20/25/27/30/40, 3 No. Spanner: 5/6/8MM, 3 No. Spline: 4/6/8MM, 3 No. Troq: 6/8/10, 3 No. Tri-wing: 1/2/3, 10 No. Pozi: PZ0x2PCS/PZ1x2PCS/PZ2x3PCS/PZ3x3PCS, 10 No. Hex with hole: H3x2PCS/H4x2PCS/H5x3PCS/H6x3PCS, 20 No. Phillips: PH0x5PCS/PH1x5PCS/PH2x5PCS/PH3x5PCS

Socket adaptor, 1/2FX3/8M

Coupler CRV SIZE: 1/2“ X 5/16”

Hope you find the video helpful, if you do, please subscribe for more videos.

Please leave a comment if any questions occurred, I will be happy to answer.

Thanks for watching!

Please rate 👍 , comment ✍ , share 🔗 and subscribe 🔔 for more videos: https://www.youtube.com/channel/UCOLiogxmoVZNkxFAWQ_FL1Q?sub_confirmation=1

[yummyyume]

Miraculous Ladybug x KHR prompt/idea

I apologize for any spelling or grammar errors, English is not my first language. I hope it’s still intelligible. 

I’d love it if anyone would had to it.

.

.

.

Summary:

After the death of his grandfather Fu and the ‘accident’ that damaged his mother’s mind, Tsuna found himself becoming the new Guardian of the Miraculous.

It’s not that he’s ill equipped to handle the situation, but more that someone is wrecking havoc in Japan using powers that are far too similar to Miraculous Gods and Tsuna doesn’t have a Black Cat to balance his Ladybug.

Enter Reborn, a diminutive hitman who is supposed to turn him into a mafia boss. Tsuna really doesn’t have the time for that nonsense.

.

Miraculous distribution and flames headcanons:

Tsuna - Sky - Tikki

Reborn - Sun - Plagg

Chrome - Mist - Nooroo

Mukuro - Mist - Trixx

Takeshi - Rain - Longg

Hayato - Storm - Barkk

Ryohei - Sun - Xuppu

Hibari - Cloud - Roaar

Kyouko - Mist - Daizzi

Hana - Storm - Sass

Haru - Lightning - Pollen

Mochida - Lightning - Wayzz

Irie - Sun - Fluff

Spanner - Lightning - Kaalki

Skull - Cloud - Mullo ??

I love Skull, so maybe?

The three remaining Kwami I don’t know who to pair with. Any ideas?

Stompp

Ziggy

Orikko

.

Headcanons for this AU:

-Aged-up characters. The kids are sixteen/seventeen and in high school when the Daily Life Arc start.

-After the fall of the Order, Fu is determined to repair some of his mistakes. He goes back to the temple and looks for the Peacock and the Butterfly Miraculous until he finds them, then he flees.

-Nana is Duusu’s true holder, but repairing the brooch has broken her mind. That’s why she’s so oblivious and absentminded.

-Reborn hates the Back Cat Miraculous as much as he loves it. Every time he uses it, he transforms back into his adult body. It doesn’t make the burden of the pacifier disappear and would Reborn be a lesser man he would be crushed under the weight of the curse and the disappointment of changing back into a baby once his time was up.

-Endgame would be Tsuna x Reborn because I’m weak. Or I could keep it Gen, and Tsuna and Reborn are very, very close, but don’t have a mentor/mentee relationship. The thing is, since the Black Cat and the Ladybug are all about balance. Tsuna teach Reborn about the Miraculous while Reborn teach Tsuna about the Mafia. It’s a mutual relationship. No one is ‘above’ the other.

-Spanner is Irie’s internet penpal. They met on a forum about robotics and hit it off. Spanner, a minor, decided that he really liked Japan from what his friend was telling him and moved to Namimori. To this day, Tsuna still doesn’t know if Spanner has family members who miss him or if he even has a visa.

-Tsuna’s flames weren’t sealed because he was with Fu when Nono and Iemitsu visited so he didn’t activate them.

He’s still a bit of a loser in school, but that’s because he has other things to worry about than school: his mother’s and grandfather’s health, his guardian training...

After Fu’s death, he has to balance guardian and Ladybug duties with school and so doesn’t put much effort in the latter

-The Miraculous holders are all Tsuna’s guardians. None of them are actives, except maybe Hibari and Mukuro, but Tsuna chose them because they felt right.

-Mukuro arrives in Namimori when Tsuna is fourteen. He’s looking for a place to lay low while the dust he kicked up settles in Italy. He choose Namimori because he met a young girl while dream walking and her flames signature is so close to his own that he can’t pass it up. He wasn’t expecting Tsuna.

-As a matter of fact, no one is ever expecting Tsuna.

-The reports about Tsuna that Reborn gets from Iemitsu are utter garbage. The Hibari have long since intercepted the CEDEF’s plants and they are feeding Vongola false infos about their towns and their inhabitants. They will not accept any casualty like Tsuyoshi’s wife ever again.

-The Kwami are really, really not happy about Checker Face.

Who did that baby face alien thought he was? They were the ones regulating the balance of this world like they always had since the creation of the universe. They didn’t need some snot-nosed brat who was hiding in their town to make decision about the world without consulting them and undermining all their hard work!

Kawahira may or may not disappear. Tikki, in particular, looks really smug when they receive the news.

.

Personal headcanons that are true for all my AU:

-Namimori is neutral territory and they are a lot of retired criminals living there. The Hibari are in charge and don’t take well to outsiders coming for the people under their protection. Yamamoto Tsuyoshi is not worried about his son, because after his former employers tracked him down and killed his wife, the Hibari went on a rampage and eradicate Tsuyohi’s former yakuza clan.

-As a civilian Sky, Tsuna was never told that there could only be one of each element under his Sky. So it’s very surprising for anyone in the mafia to realise that he has two Lightning, two Storm, three Mist...

-The Rooster Miraculous’ weapon is a bow and their holder’s costume has a limited numbers of feathers. Each feathers is an arrow. Once all the arrows have been used, the Miraculous start beeping and they have five minutes before they detransform.

As experience grow, others Miraculous gain more minutes, except the Rooster who gains more arrows.

That’s all for now. I’ll add more later. Time for bed for me

[globalspecialistprograms-blog]

Global understudies in the UK: migration and visa Q&A

From visa lapse to Distance Learning and Tier 4 investigation visas, this Q&A by movement master law office, Reiss Edwards, can help. If you still have any query then you can visit Global Specialist.

Consistently, practically a large portion of 1,000,000 global understudies go to the UK to consider, of which more than 33% are from outside of the European Union. Coronavirus has, notwithstanding, put a 'spanner underway's implying that instructive foundations over the UK are shut aside from separation learning. On the off chance that you are a global understudy who is wanting to go to the UK to initiate your examinations, you are as of now in the UK, or you have gotten back to be with your family during the lockdown, you might be uncertain about your position with respect to movement, and what will occur straightaway.

Imagine a scenario in which my Study Visa Expires Soon.

In the event that your examination visa has lapsed or is expected to terminate inevitably, and you can't leave the UK because of COVID-19, the Home Office have expressed they will extend it to 31st May 2020 without expecting you to present a movement application or pay a charge. You will, in any case, need to finish and send a structure to the Home Office's Coronavirus Immigration Help Center.

I Applied for a Study Visa While in the UK before the UKVI Offices Closed, what will Happen Now?

Right now, all UK Visas and Immigration (UKVI) administration focuses are shut in the UK. As per UKVI, as long as you applied before your present visa status lapsed, you won't be named an overstayer while hanging tight for a choice. This implies that you won't have to apply for the free augmentation illustrated previously.

In the event that I am Absent from my Studies will I Lose my Tier 4 Study Visa?

Customarily, instructive patrons have an obligation to screen participation of Tier 4 examination visa holders and report global understudies who are not going to their course. In the current circumstance, the Home Office has affirmed that no implementation move will be made against understudies who are done going to homeroom based learning or missing because of COVID-19 because of related sickness or travel.

Imagine a scenario in which I have been given Immigration Approval, however I can't go to the UK.

In the event that you have a spot on a course in the UK, you have been given a CAS, and your Tier 4 examination visa has been affirmed, and you wish to initiate concentrate yet you can't make a trip to the UK, at that point your solitary alternative will be to inquire as to whether you can embrace online far off separation learning with your instructive supplier. When the movement limitations are lifted and your course has restarted, you should check if your entrance leeway is as yet legitimate. In the event that it has, you will have the option to demand a supplanting passage leeway vignette sticker with the new date, for nothing out of pocket (until the finish of 2020).

Would i be able to Keep my Tier 4 examination visa regardless of whether I am utilizing Distance Learning?

The exhortation of the UK government is that Tier 4 backers can keep on supporting their current Tier 4 visa understudies who are examining through separation realizing, regardless of whether they are in the UK, or in another nation. Besides, scholarly backers (for example the British school or University) are not needed to pull back sponsorship for any new Tier 4 visa understudies who have been not able to head out to the UK to begin their examinations, and are using separation learning.If you are a global understudy who wishes to learn at a UK instructive foundation yet can just do so by means of separation learning, you won't have to apply for a Tier 4 visa to do as such, as you won't have to enter the UK presently (anyway this is being investigated on 31st May '20).

Would i be able to Start my Studies before my Application to Switch to Tier 4 is chosen?

Under explicit conditions, the Home Office is permitting the individuals who are exchanging into the Tier 4 investigation course to start their examinations preceding their application being chosen if it tends to be appeared:

The individual is concentrating with a Tier 4 support (not a 'Inheritance Sponsor')

The Tier 4 support has appointed a Certificate of Acceptance for Studies (CAS)

The individual has presented an in-time application and has furnished the support with affirmation of that reality

The individual has a substantial ATAS testament (where fundamental) needed for their course

Imagine a scenario where I needed to leave the UK before I got my Biometric Residence Permit (BRP.

The UK Council for International Student Affairs (UKCISA) suggests that those understudies who left the UK however were still to get their biometric living arrangement grant (BRP) ought to ask their training supplier or a confided in singular still in the UK to advance the archive by post. Shockingly, there is a danger that in the event that it isn't gathered, it might be dropped, implying that the individual should reapply before entering the UK.

Would i be able to enter the UK to Commence my Studies once Travel Restrictions in my Home Country are Lifted?

You won't have the option to apply for authorization to enter the UK for the motivations behind investigation until vis-à-vis study resume, and application revolves re-open the world over. Tragically, expected postponements in handling applications (for example because of overabundances) may mean you can't proceed with your seminar on schedule; in such conditions, you may need to embrace your course utilizing separation learning until you can enter the UK.

Last words

Covid pandemic has caused numerous issues for worldwide understudies previously considering or wanting to concentrate in the UK. In the event that you are in the UK or your nation of origin and still uncertain of your position, contact your instructive supplier to request their recommendation. They are managing requests from understudies over the globe as of now and will have the option to clarify your alternatives from the stance of examining and UK migration. You can be guaranteed that UK instructive foundations will be as adaptable as conceivable given the troublesome conditions, and will do everything they can to continue courses for their esteemed worldwide understudies as quickly as time permits.

[withastolenlantern]

The setting Mediterranean sun threw long shadows across the floor of the garage as Collier pulled the car through the threshold door, the engine sputtering as he throttled it down and brought the vehicle to a stop.

"Something's wrong with the timing," he called as he pulled off his helmet and tossed it to an approaching crew member. "I felt it in turn seven and then it just got worse."

"Was that before or after you you clipped the safety berm in the straights?" his chief mechanic replied, already reaching to remove the bonnet cover. "And what the hell did you do to my transmission!?"

"It's not YOUR transmission, Doc. It's de Marais'. And it's not my fault the fucking clutch slipped. There's still more horsepower in the margins, you just need to retune." Collier climbed from the cockpit of the racer, unizpped the top half of his track suit, and walked around to the front of the car where the Belgian crew chief was swearing through the steam in a Flemish-French patois.

"Do you see this? This piston head is nearly cracked, Jan. If you keep driving like this, this will be je hoofd some day," he warned Collier with a furstrated finger to the chest, his round glasses still fogged from the heat of the radiator. "And I for one do not look forward to scraping you out of this vehicle."

Parnaße took a skinny cigarette out from the front pocket of his cover-alls and lit it with a practiced ease. "Marcel, bring the spanner set. The big one. Messieur Collier has made a mess of things once again," he called across the garage floor.

Jan turned to walk out of the pit area to the showers, but was arrested by the sight of an unfamiliar figure chatting amongst the mechanical crew. It was a woman, dark skinned an elegantly dressed, her gloves hands cradling a long ivory cigarette holder. "Who the hell is that Doc?" the driver asked Parnaße. "Someone from the firm?"

"Je ne sais pas," the chief said. "Asked for you a few minutes ago. Anglo, by the her accent so I doubt it. Zeer mooi, non?"

"Oui," Collier replied. "That's why I'm worried."

The woman broke from the huddle of shophands and strode confidently toward Jan. "Messieur Collier, your reputation proceeds you.

"I'm afraid I can't say the same for you, madame. Have we met?"

"I should think not, she said with a small laugh. "Lady Mary Smith."