#Intake Manifolds Market Report

[credenceresearchdotblog]

The global demand for Adipic Acid market was valued at USD 7984.2 Million in 2023 and is expected to reach USD 12927.1 Million in 2032, growing at a CAGR of 5.50% between 2024 and 2032.Adipic acid, a white crystalline powder, is primarily used as a monomer in the production of nylon 6,6, a key component in the textile and automotive industries. With its wide-ranging applications in various sectors, the adipic acid market has experienced significant growth over the past few decades. This article delves into the current state of the adipic acid market, its growth drivers, challenges, and future prospects.

Browse the full report at https://www.credenceresearch.com/report/adipic-acid-market

Market Overview

The global adipic acid market was valued at approximately USD 5 billion in 2023 and is projected to grow at a compound annual growth rate (CAGR) of 4.5% from 2024 to 2030. This growth can be attributed to the increasing demand for nylon 6,6, the expansion of the automotive and textile industries, and the rising emphasis on sustainability.

Key Drivers

1. Automotive Industry Growth: Nylon 6,6, derived from adipic acid, is extensively used in the automotive industry for manufacturing various components such as air intake manifolds, engine covers, and radiator end tanks. The lightweight and durable nature of nylon 6,6 makes it a preferred material, driving the demand for adipic acid. The global shift towards electric vehicles (EVs) further fuels this demand, as EVs require lightweight materials to enhance energy efficiency.

2. Textile Industry Expansion: Nylon 6,6 is also a crucial material in the textile industry, used in the production of carpets, apparels, and industrial yarns. The increasing consumer demand for high-performance textiles and the growth of the fashion industry are significant factors propelling the adipic acid market.

3. Sustainability and Green Chemistry: There is a growing emphasis on sustainability and reducing carbon footprints across industries. The adipic acid market is witnessing innovations in bio-based production methods, which utilize renewable raw materials instead of traditional petrochemical sources. These environmentally friendly processes are gaining traction, aligning with global sustainability goals and attracting investments.

Challenges

Despite its promising growth, the adipic acid market faces several challenges:

1. Volatile Raw Material Prices: Adipic acid production relies heavily on petrochemical derivatives such as cyclohexane. Fluctuations in crude oil prices directly impact the cost of raw materials, affecting the overall production cost and market stability.

2. Environmental Concerns: Traditional adipic acid production methods involve the use of nitric acid, leading to the emission of nitrous oxide, a potent greenhouse gas. Stricter environmental regulations and the need to reduce greenhouse gas emissions pose significant challenges to conventional production processes. Companies are investing in research and development to discover more sustainable and eco-friendly production methods.

3. Competition from Alternatives: The development of alternative materials, such as bio-based polyamides and other synthetic fibers, poses a threat to the adipic acid market. These alternatives offer similar properties and, in some cases, better performance, leading to a potential shift in market dynamics.

Regional Insights

The Asia-Pacific region dominates the adipic acid market, accounting for the largest share in 2023. The region's rapid industrialization, expanding automotive and textile sectors, and growing population contribute to this dominance. China, in particular, is a major consumer and producer of adipic acid, driven by its robust manufacturing capabilities and increasing demand for high-performance materials.

North America and Europe also hold significant market shares, with well-established automotive and textile industries. The focus on sustainable production methods and stringent environmental regulations in these regions further drive innovation and market growth.

Future Prospects

The future of the adipic acid market looks promising, with several trends shaping its trajectory:

1. Bio-based Production Methods: Continued advancements in bio-based adipic acid production methods are expected to reduce the environmental impact and enhance sustainability. These methods leverage renewable resources and offer a greener alternative to traditional processes.

2. Technological Innovations: Ongoing research and development efforts are focused on improving production efficiency, reducing costs, and discovering novel applications for adipic acid. Innovations in catalyst technologies and process optimization are likely to drive future growth.

3. Rising Demand for High-Performance Materials: The increasing demand for lightweight, durable, and high-performance materials in various industries, including automotive, textiles, and electronics, will continue to propel the adipic acid market. The shift towards electric vehicles and sustainable practices will further augment this demand.

Key Players

Ascend Performance Materials

Asahi Kasei Corporation

BASF SE

INVISTA

LANXESS

Liaoyang Tianhua Chemical Co., Ltd

Radici Partecipazioni S.p.A.

Solvay

Sumitomo Chemical Co., Ltd.

DOMO Chemicals

Segmentation by Application

In 2023, the nylon production, six fiber application segment dominated the market, accounting for 53.1% of the total revenue. Its significant market share is driven by the expanding use of nylon 6, 6 as a metal alternative in automotive, electrical, and electronic devices, among other things. Nylon 6,6 fiber is also commonly used in technical components such as gears, nuts, bolts, bearings, powder tool casings, rivets and wheels, and rocker box covers. The properties of nylon 6,6 fiber, such as moisture and mildew resistance, high melting temperature, outstanding durability, and improved strength, are predicted to push its employment in a variety of applications in the coming years.

Polyurethane Production also has a consistent growth potential due to its use in a variety of end-use industries.

Segmentation by End-Use Industry

The automotive segment dominated the market over the projection period. The automotive industry mostly uses nylon 66, which is manufactured from adipic acid, due to its superior mechanical, temperature-resistant, and lightweight properties. Adipic acid is commonly used as a monomer in the production of polyamide 6.6 pellets and other polyamides or polymers for engineering plastics, as well as polyurethane for flexible and semi-rigid foam.

However, the food and beverage industry sector has gained significant market share.

Segmentation by Form

The powder form of Adipic Acid is in high demand in the market. Adipic acid powder is widely utilized in a variety of industries, including textiles, automobiles, and food. It is preferred for its portability, storage, and transportation. The powder form enables exact dosing, making it suited for a variety of applications. In addition, the powder form is more stable and has a longer shelf life than the liquid version.

Segmentation by Purity

Food Grade is the fastest-growing section of the Adipic Acid Market. Adipic Acid is becoming increasingly popular in the food business due to its numerous possibilities as a food ingredient. In food and beverage items, adipic acid is used to regulate acidity and increase flavor.

Segmentation by Production Process

Cyclohexane held the largest market share in 2023. Almost all commercial adipic acid is made from cyclohexane. It is commonly utilized as an intermediate chemical in a variety of processes, with around 54% of its output used to produce adipic acid for nylon-66.

However, cyclohexanone is expected to increase at the fastest CAGR of 8.5% throughout the projection period.

Segmentation by Region

North America dominated the global industry in 2023, accounting for more than 32.9% of total revenue

Asia Pacific is predicted to be the fastest-growing regional market

The rest of the world, including Latin America, the Middle East, and Africa, supplies the remaining demand for Adipic Acid.

Browse the full report at https://www.credenceresearch.com/report/adipic-acid-market

About Us:

Credence Research is committed to employee well-being and productivity. Following the COVID-19 pandemic, we have implemented a permanent work-from-home policy for all employees.

Contact:

Credence Research

Please contact us at +91 6232 49 3207

Email: sales@credenceresearch.com

Website: www.credenceresearch.com

[priyanshisingh]

Automotive Solenoid Market Dynamics: Global Growth and Trends (2023-2032)

Automotive solenoid market involves the design, manufacturing, and application of solenoids within various vehicle systems, playing a critical role in controlling and automating functions such as starting the engine, shifting gears, and managing fuel and emission systems. Solenoids are electromechanical devices that convert electrical energy into mechanical motion, used extensively in both traditional internal combustion engines and modern electric vehicles. The market is driven by increasing vehicle production, advancements in automotive technology, and the growing demand for enhanced fuel efficiency and reduced emissions. Technological innovations have led to the development of more efficient and durable solenoids, capable of withstanding harsh operating conditions and improving overall vehicle performance.

The market is also influenced by trends such as the integration of advanced driver-assistance systems (ADAS) and the shift towards electric and hybrid vehicles, which require specialized solenoid solutions. Despite challenges like high manufacturing costs and the need for precise engineering, the automotive solenoid market is poised for steady growth, driven by the ongoing evolution of automotive technologies and the increasing complexity of modern vehicles.

Automotive Solenoid: Key Points-

Functions:

Engine Starting: Used in starter solenoids to initiate engine cranking.

Transmission Control: Manages gear shifting in automatic transmissions.

Fuel and Emission Systems: Regulates fuel injection, vapor recovery, and exhaust gas recirculation (EGR) systems.

Door Locks and Trunk Release: Controls locking and unlocking mechanisms.

Valve Control: Operates in various fluid control systems, including HVAC systems.

Types:

Starter Solenoids: Engage the starter motor to crank the engine.

Shift Solenoids: Control the flow of transmission fluid to change gears.

EGR Solenoids: Regulate the flow of exhaust gases into the intake manifold.

Fuel Injector Solenoids: Control the opening and closing of fuel injectors.

Technological Advancements:

Development of more efficient and durable solenoids.

Innovations to withstand harsh operating conditions and improve performance.

Integration with advanced driver-assistance systems (ADAS).

Market Drivers:

Increasing vehicle production worldwide.

Rising demand for fuel-efficient and low-emission vehicles.

Advancements in automotive technology, including electric and hybrid vehicles.

Specialized solenoid solutions for managing battery systems, electric drive motors, and regenerative braking systems.

Challenges:

High manufacturing costs due to the need for precise engineering.

Durability and reliability requirements to withstand extreme conditions.

Competition and the need for continuous innovation to meet evolving automotive standards.

Market Trends:

Shift towards electric and hybrid vehicles, requiring new solenoid technologies.

Increased focus on automation and control in modern vehicles.

Growth of advanced driver-assistance systems (ADAS) driving demand for specialized solenoids.

Future Outlook:

Steady growth expected due to the ongoing evolution of automotive technologies.

Increasing complexity of modern vehicles will drive the need for more sophisticated solenoid solutions.

Continued innovation and R&D efforts to enhance solenoid performance and efficiency.

Key player:

Nidec Corporation

Mitsubishi Electric Corporation

Denso corporation

Global Point Magnetics Asia Co. Ltd.

Robert Bosch GmbH

Hitachi Ltd.

Padmini VNA Mechatronics Pvt. Ltd.

Continental AG

Johnson Electric Holding Ltd.

More About Report- https://www.credenceresearch.com/report/automotive-solenoid-market

Automotive Solenoid Market: Key Findings of Study-

Technological Advancements:

Significant advancements in solenoid technology have led to the development of more efficient, durable, and reliable solenoids capable of withstanding harsh automotive environments.

Integration of solenoids with modern vehicle systems, including advanced driver-assistance systems (ADAS) and electric and hybrid powertrains.

Regional Insights:

North America and Europe: Mature markets with high vehicle ownership and a strong focus on technological innovation and regulatory compliance.

Asia-Pacific: Rapidly growing market due to increasing vehicle production, rising disposable incomes, and urbanization, particularly in countries like China and India.

Latin America and Middle East & Africa: Emerging markets with growth potential driven by economic development and increasing automotive production.

Key Market Drivers:

Rising demand for fuel-efficient and low-emission vehicles, necessitating the use of advanced solenoid technologies in fuel and emission control systems.

Increasing complexity and automation in modern vehicles, leading to greater reliance on solenoids for various control functions.

Growth of electric and hybrid vehicles, which require specialized solenoid solutions for battery management, electric motor control, and regenerative braking systems.

Challenges:

High manufacturing costs due to the need for precision engineering and high-quality materials.

Durability and reliability requirements, as solenoids must perform consistently under extreme temperatures and conditions.

Competitive landscape requiring continuous innovation and adaptation to meet evolving automotive standards and consumer expectations.

Consumer Awareness and Acceptance:

Growing awareness among consumers and automakers about the benefits of advanced solenoid technologies in improving vehicle performance, safety, and efficiency.

Positive reception of solenoid-driven innovations in vehicle systems, contributing to broader market adoption.

Competitive Landscape:

Dominated by key players such as Bosch, Delphi Technologies, Denso Corporation, Mitsubishi Electric, and Hitachi Automotive Systems, who are investing heavily in R&D and innovation.

Smaller and emerging companies are focusing on niche applications and specialized solenoid solutions to gain market share.

Regulatory Impact:

Stringent emissions and safety regulations globally are driving the adoption of advanced solenoid technologies in automotive applications.

Compliance with these regulations requires continuous development and improvement of solenoid performance and reliability.

Segments:

By Vehicle Type

Passenger Vehicle

LCV

HCV

Electric Vehicle

By Application Type

Engine Control

Fuel and Emission Control

HVAC

Others

By Type

2-Way Valve

3-Way Valve

4-Way Valve

Others

Browse the full report –  https://www.credenceresearch.com/report/automotive-solenoid-market

Browse Our Blog: https://www.linkedin.com/pulse/automotive-solenoid-market-insights-comprehensive-6r6mf

Contact Us:

Phone: +91 6232 49 3207

Email: sales@credenceresearch.com

Website: https://www.credenceresearch.com

[themarketinsights]

Automotive Intake Manifold Market Will Hit Big Revenues In Future | Biggest Opportunity Of 2023

Latest released the research study on Global Automotive Intake Manifold Market, offers a detailed overview of the factors influencing the global business scope. Automotive Intake Manifold Market research report shows the latest market insights, current situation analysis with upcoming trends and breakdown of the products and services. The report provides key statistics on the market status, size, share, growth factors of the Automotive Intake Manifold The study covers emerging player’s data, including: competitive landscape, sales, revenue and global market share of top manufacturers are Magneti Marelli S.p.A. (Italy), Holley Performance Products (United States), Keihin North America, Inc. (United States), Mahle GmbH. (Germany), Edelbrock L.L.C. (United States), Röchling Group (Germany), Sogefi S.p.A. (Italy), Aisin Seiki Co., Ltd. (Japan)

Free Sample Report + All Related Graphs & Charts @: https://www.advancemarketanalytics.com/sample-report/22331-global-automotive-intake-manifold-market-1?utm_source=Organic&utm_medium=Vinay

The automotive intake manifold is the part of an engine that supplies the fuel/air mixture to the cylinders. The design of these components varies according to its application, but they all perform the same function and they all have a single input and multiple outputs. The rapid rise in vehicle production across the globe is projected to augment the demand for automotive intake manifolds in the coming years.

Thanks for reading this article; you can also get individual chapter wise section or region wise report version like North America, Europe or Southeast Asia.

[foodandbeveragesupdates]

Polypropylene Market Size & Share, Future Growth, Trends Evaluation, Demands, Regional Analysis and Forecast to 2028, Fortune Business Insights

The global polypropylene market size is projected to reach USD 108.57 billion by 2028, exhibiting a CAGR of 5.2% during the forecast period. As per the report by Fortune Business Insights™, titled “Polypropylene Market, 2021-2028”, the market size was USD 75.12 billion in 2020 and is estimated to hit USD 76.00 billion in 2021.

Advancements in Plastic Recycling Technologies to Create New Growth Opportunities

Plastic pollution has become a scourge of development for the planet. Now, chemical industry companies, with support from governments and international bodies, are taking concerted steps to tackle this problem head-on using advanced recycling technologies. For example, in April 2021, INEOS bagged the ISCC Plus award from the International Sustainability & Carbon Certification organization for its successful commercial-scale trials of next-generation recycling technology to produce polypropylene (PP), high-density polyethylene (HDPE), propylene, and ethylene. In the same month, the US Polypropylene Recycling Coalition, a cross-industry collaboration, sanctioned USD 1 million to three facilities to augment the recovery of PP in the US. Thus, growing recognition and improving funding for the plastic circular economy will play a vital role in the development of this market.

Driving Factor

Integration of PP in Electric Vehicles to Catalyze MarketGrowth

With vehicle pollution at an all-time high in major economies, the adoption of electric vehicles (EVs) is surging worldwide. For example, in 2019, global electric car sales reached 2.1 million, according to data released by the International Energy Agency (IEA). The key to enhancing the energy efficiency of EVs is to reduce their weight by employing lightweight materials in the manufacturing of their components. Polypropylene, which is a thermoplastic, is perfectly suited to meet this goal, primarily because it has low density. As a result, many EV makers are actively integrating PP in their products to make them more energy-efficient. For example, the Skoda Scala features 10% low-talc PP from Borealis, which has been used to make the car’s center console, glove box, and instrument panel. Similarly, Renault’s B4D engine leverages a PP compound for the air intake manifold, weighing 15% lesser than manifolds made from traditional polyamide-based materials. In sum, the incorporation of PP-based materials in EVs is the new thriving trend in the plastics industry, which is propelling the market.

Regional Insights

Promising Growth of the Packaging Industry to Aid the Asia Pacific Market

Supported by the spectacular growth of the packaging industry, Asia Pacific is set to dominate the polypropylene market share during the forecast period. The progress of the packaging industry in this region is driven by rapid urbanization in India and China, where packaged foods, beverages, and consumer goods are in high demand. The region’s market size stood at USD 39.95 billionin 2020.

Information source:

[ellinapark]

Natural Gas Internal Combustion Engine Outlook: World Approaching Demand & Growth Prospect 2023-2028

Global Natural Gas Internal Combustion Engine Market Report from AMA Research highlights deep analysis on market characteristics, sizing, estimates and growth by segmentation, regional breakdowns & country along with competitive landscape, players market shares, and strategies that are key in the market. The exploration provides a 360° view and insights, highlighting major outcomes of the industry. These insights help the business decision-makers to formulate better business plans and make informed decisions to improved profitability. In addition, the study helps venture or private players in understanding the companies in more detail to make better informed decisions. Major Players in This Report Include:

Caterpillar (United States)

Mitsubishi Heavy Industries (Japan)

Cummins (United States)

Daimler AG (Germany)

Deutz (Germany)

Yanmar Company (Japan)

Rolls-royce (United Kingdom)

Hyundai (South Korea)

Agcopower (Finland)

Ashok Leyland (India)

Shanghai Diesel (China)

Compressed natural gas vehicles operate much like gasoline-powered vehicles with spark-ignited internal combustion engines. The engine functions the same way as a gasoline engine. Natural gas is stored in a fuel tank, or cylinder, typically at the back of the vehicle. A CNG fuel system transfers high-pressure natural gas from the fuel tank to the engine’s intake manifold or combustion chamber. The pressure is then reduced to a level compatible with the engine fuel injection system, and the fuel is introduced into the intake manifold or combustion chamber, where it is mixed with air. The fuel-air mixture is then compressed and ignited by a spark plug. Market Drivers The Exponential Growth in Automotive Industry Worldwide

The Rising Demand from Aerospace and Marine Sector

The Growing Environment Concerns Due to Gasoline Combustion

Stringent Government Regulations over Carbon Emissions

Market Trend The Growing Popularity of CNG as a Fuel

Opportunities Technological Advancements in CNG Internal Combustion Engines

The Growth Opportunities from Developing Nations

Challenges The Cost and Placement of Fuel Storage Containers Is the Major Barrier to Wider/Quicker Adoption of CNG as A Fuel

The Natural Gas Internal Combustion Engine market study is being classified 20180 Presented By

AMA Research & Media LLP

[electronalytics]

In-Vehicle Sensors Market Challenges, Analysis and Forecast to 2023-2032

In-vehicle sensors play a crucial role in modern automobiles, enabling various functionalities and enhancing overall safety, comfort, and efficiency. These sensors are designed to gather data about the vehicle's surroundings, internal conditions, and performance parameters. This information is then utilized by the vehicle's systems to make informed decisions and adjustments.

Some common types of in-vehicle sensors include:

Proximity and occupancy sensors: These sensors detect the presence of nearby objects or people and are used in applications like parking assistance, blind-spot detection, and occupant detection for airbag deployment.

Motion sensors: These sensors measure the acceleration, angular velocity, and orientation of the vehicle. They are used in applications such as electronic stability control, rollover detection, and adaptive headlights.

Temperature and humidity sensors: These sensors monitor the internal cabin temperature and humidity levels, enabling climate control systems to maintain a comfortable environment.

Pressure sensors: Pressure sensors are used to measure various parameters like tire pressure, fuel pressure, and engine intake manifold pressure.

Light sensors: Light sensors detect ambient light levels and are used in automatic headlight control systems and rain-sensing wipers.

The in-vehicle sensors market has been witnessing growth due to several factors, including the increasing demand for advanced driver assistance systems (ADAS) and autonomous vehicles. The integration of sensors in vehicles enables features like adaptive cruise control, lane departure warning, and collision avoidance, enhancing safety and convenience.

Furthermore, the growing emphasis on fuel efficiency and environmental regulations has driven the demand for sensors that monitor parameters like air-fuel ratio, exhaust gas temperature, and tire pressure, enabling vehicles to optimize performance and reduce emissions.

It's important to refer to the latest market reports and research to get accurate and up-to-date information about the current state and trends in the in-vehicle sensors market.

I recommend referring to our Stringent datalytics firm, industry publications, and websites that specialize in providing market reports. These sources often offer comprehensive analysis, market trends, growth forecasts, competitive landscape, and other valuable insights into the humidity sensors market.

By visiting our website or contacting us directly, you can explore the availability of specific reports related to the humidity sensors market. These reports often require a purchase or subscription, but we provide comprehensive and in-depth information that can be valuable for businesses, investors, and individuals interested in the market.

Remember to look for recent reports to ensure you have the most current and relevant information.

Click Here, To Get Free Sample Report : https://stringentdatalytics.com/sample-request/in-vehicle-sensors-market/805/

Market Segmentations:

Global In-Vehicle Sensors Market: By Company • Continental • NXP • ADI • Infineon • Delphi • Bosch • Denso • ZF TRW • Autoliv • Allegro Micro Systems • CTS • Melexis Microelectronic Systems • Sensata Global In-Vehicle Sensors Market: By Type • Wired • Wireless Global In-Vehicle Sensors Market: By Application • Passenger Vehicles • Commercial Vehicles Global In-Vehicle Sensors Market: Regional Analysis All the regional segmentation has been studied based on recent and future trends, and the market is forecasted throughout the prediction period. The countries covered in the regional analysis of the Global In-Vehicle Sensors market report are U.S., Canada, and Mexico in North America, Germany, France, U.K., Russia, Italy, Spain, Turkey, Netherlands, Switzerland, Belgium, and Rest of Europe in Europe, Singapore, Malaysia, Australia, Thailand, Indonesia, Philippines, China, Japan, India, South Korea, Rest of Asia-Pacific (APAC) in the Asia-Pacific (APAC), Saudi Arabia, U.A.E, South Africa, Egypt, Israel, Rest of Middle East and Africa (MEA) as a part of Middle East and Africa (MEA), and Argentina, Brazil, and Rest of South America as part of South America.

Visit Report Page for More Details : https://stringentdatalytics.com/reports/in-vehicle-sensors-market/805/

Reasons to Purchase In-Vehicle Sensors Market Report:

• To obtain insights into industry trends and dynamics, including market size, growth rates, and important factors and difficulties. This study offers insightful information on these topics.

• To identify important participants and rivals: This research studies can assist companies in identifying key participants and rivals in their sector, along with their market share, business plans, and strengths and weaknesses.

• To comprehend consumer behaviour: these research studies can offer insightful information about customer behaviour, including preferences, spending patterns, and demographics.

• To assess market opportunities: These research studies can aid companies in assessing market chances, such as prospective new goods or services, fresh markets, and new trends.

• To make well-informed business decisions: These research reports give companies data-driven insights that they may use to plan their strategy, develop new products, and devise marketing and advertising plans.

In general, market research studies offer companies and organization’s useful data that can aid in making decisions and maintaining competitiveness in their industry. They can offer a strong basis for decision-making, strategy development, and business planning.

Click Here, To Buy Premium Report: https://stringentdatalytics.com/purchase/in-vehicle-sensors-market/805/?license=single

About US:

Stringent Datalytics offers both custom and syndicated market research reports. Custom market research reports are tailored to a specific client's needs and requirements. These reports provide unique insights into a particular industry or market segment and can help businesses make informed decisions about their strategies and operations.

Syndicated market research reports, on the other hand, are pre-existing reports that are available for purchase by multiple clients. These reports are often produced on a regular basis, such as annually or quarterly, and cover a broad range of industries and market segments. Syndicated reports provide clients with insights into industry trends, market sizes, and competitive landscapes. By offering both custom and syndicated reports, Stringent Datalytics can provide clients with a range of market research solutions that can be customized to their specific needs

Contact US:

Stringent Datalytics

Contact No - 91-9763384149

Email Id -  sales@stringentdatalytics.com

Web - https://stringentdatalytics.com/

[karanresearchlayer]

Polyetherimide (PEI) Market is poised to achieve continuing growth During Forecast Period 2023-2030 |SABIC, RTP, Ensinger, Mitsui Chemicals, , etc

Polyetherimide (PEI) is a high-performance thermoplastic material that is known for its excellent thermal and mechanical properties, chemical resistance, and dimensional stability. It is used in a wide range of applications across various industries, including aerospace, automotive, electronics, and medical.

For Download Sample Report Click Here: https://www.marketinforeports.com/Market-Reports/Request-Sample/499292

Here are some key characteristics of PEI:

High heat resistance: PEI can withstand high temperatures of up to 180°C (356°F) without losing its mechanical properties or dimensional stability.

Excellent chemical resistance: PEI is highly resistant to many chemicals, including acids, bases, and solvents.

High strength and stiffness: PEI has a high tensile strength and modulus of elasticity, making it ideal for applications that require a high degree of structural integrity.

Dimensional stability: PEI has low creep and low coefficient of thermal expansion, making it highly resistant to deformation under load and thermal cycling.

Good electrical properties: PEI is an excellent electrical insulator, with a high dielectric strength and low dissipation factor.

Some common applications of PEI include:

Aerospace components: PEI is used in aircraft components, such as ducting, insulation, and structural parts.

Automotive components: PEI is used in automotive applications, such as engine covers, air intake manifolds, and lighting components.

Electronics: PEI is used in electronics applications, such as connectors, sockets, and switches.

Medical devices: PEI is used in medical devices, such as surgical instruments, dialysis equipment, and diagnostic tools.

Overall, PEI is a versatile material with many desirable properties that make it suitable for a wide range of applications.

[researchvishal]

Global Automotive Air Intake Manifold Market Industry Overview and Competitive Landscape till 2032

According to Future Market Insights (FMI), the automotive air intake manifold market is poised to reach US$ 52,813.4 Million by 2032 and register growth at 4.9% CAGR over the forecast period (2022-2032).

Market Landscape

The automotive air intake manifold market is identified to be consolidated, comprising market players such as Röchling SE & Co. KG, Marelli Holdings Co., Ltd., MANN+HUMMEL, MAHLE GmbH, and Donaldson Company, Inc. Market players forming supply contracts with local and regional automotive ancillaries are expected to drive market growth.

Furthermore, tie-ups between intake manifold manufacturers are fueling automotive air intake manifold market growth. Moreover, the continual dependency of local automotive OEMs on aftermarket sales will surge demand for automotive air intake manifold during the forecast period.

Automotive air intake manifold Market Projection

The rising trend among automakers to offer automotive air intake manifold as a mandatory component in their vehicles Passenger cars are one of the significant vehicle segments supporting the expansion. The sector is anticipated to benefit from expanding auto production and rising sales of sports, luxury, and high-end vehicles.

The global automotive air intake manifold market report offers noteworthy insights and analysis for the forecast period of 2022-2032. The report includes macroeconomic factors, regional pricing analysis, market dynamics, value chain analysis, market value, and volume analysis, emerging market trends, important stakeholders, a list of manufacturers and distributors, an industry roadmap for the last five years, channel partners, and strategies deployed by market players to gain a competitive edge.

A push for personal mobility, demand for comfort and safety, preference for premium features and advanced safety is expected to drive the demand in the market. Further, continuing evolution of automotive technology, including driver assistance technologies, and automated driving systems are expected to facilitate the growth in the market.

Further, key players are aiming to deliver even more significant safety benefits and meet the increasing demand for fuel-efficient vehicles. Rising demand for road transportation and growing government intervention in promoting sustainable production of vehicles is likely to propel market growth.

The material technologies in the automotive air intake manifold have significantly changed, with cast iron, aluminum, and composite plastics. The rising wave of new material technologies, such as nylon 6,6 composite material and impact-resistant plastic, are creating significant potential for automotive air intake manifolds to evenly distribute the combustion mixture to each intake port in the cylinder head, which optimizes the efficiency and performance of the engine.

Rising demand for high-speed racing cars, and stringent regulations to use light-weight materials to improve vehicle maintenance, such as aluminum and advanced composites in passenger cars and commercial vehicles, are critical factors attributed to the automotive air intake manifold market.

For more information: https://www.futuremarketinsights.com/reports/automotive-air-intake-manifold-market

Key Takeaways from Market Study

By material type, the aluminum is estimated to account for the highest share of more than 49% in terms of value in 2022.

On the basis of vehicle type, the passenger and sport cars will dominate the market creating an incremental opportunity of nearly US$ 15,199.8 Mn from 2022 to 2032.

By sales channel, OEM is set to account for more than 89% of the global automotive air intake manifold market.

Based on manifold type, the dual plane segment is expected to register fastest growth over the forecast period.

The U.S. is expected to spearhead the growth in automotive air intake manifold market during the evaluation period.

Japan and Korea are expected to vanguard the sales in East Asia automotive air intake manifold marke through 2022 & beyond

 “For better performance and volumentric efficiency of the vehicle, demand for automotive air intake manifold market is expected to surge. Further, with growing production of sustainable and fuel-efficient vehicles, manufacturers are predicted to boost the production of automotive air intake manifold and gain competitive edge”, says a Future Market Insights analyst.

[stratviewresearch]

Automotive Fuel Injection System Market Is Expected to Witness an Incredible Growth by 2028

The report on the Automotive Fuel Injection System Market published by Stratview Research covers in depth details associated with the Automotive Fuel Injection System Market.

To get a free sample report, Click here:

The Automotive Fuel Injection System Market is likely to witness a CAGR of 8.8% during the forecast period. The prime factors that are driving the Automotive Fuel Injection System Market is its superior thermal conductivity property leading to its wide usage in a wide array of industries.

Key Players

The following are the key players in the Automotive Fuel Injection System Market:

• Toyota

• Volkswagen

• General Motors

• Ford

• Nissan

• Hyundai

• BMW

• Audi

Growth drivers and Market Value:

This report, from Stratview Research, studies the Automotive Fuel Injection System Market value and growth drivers over the trend period of 2022-27. According to the report -

The fuel injection system delivers fuel or a fuel-air mixture to the cylinders by means of pressure from a pump. All diesel engine based automotive vehicles must use fuel injection by design because of diesel's greater viscosity and the need to overcome the high pressure of the compressed air in the cylinders. Gasoline engines can use either a carburetor or a fuel injection. Over a period, fuel injection has become the primary fuel delivery system in automotive gasoline engines by replacing carburetors. In gasoline engines, the fuel usually is injected into the intake manifold and mixed with air, and the resulting mixture is delivered to the cylinder.

Segment Analysis:

Based on by Fuel Type:

Gasoline direct injection system will continue to gain market acceptance in the global automotive fuel injection system market. Gasoline direct injection system is continuously replacing traditional gasoline port fuel injection system. Diesel injection system market is expected to experience a sustainable growth during the forecast period, driven by European region.

Based on Regional:

Asia-Pacific is expected to experience the fastest growth in the next five years and will remain the largest market for fuel injection system in the global automotive industry. The growth in Asia-Pacific is largely driven by increasing production of passenger vehicles in China and India to meet the regional demand. Brazil is also likely to offer healthy growth opportunities in the fuel injection system market in the global automotive industry.

Critical Questions Answered in the Report

What are the key trends in the Automotive Fuel Injection System Market?

How the market (and its various sub-segments) has grown in the last five years and what would be the growth rate in the next five years?

What is the impact of COVID-19 on Automotive Fuel Injection System Market?

What are the key strategies adopted by the major vendors to lead in the Automotive Fuel Injection System Market?

What is the market share of the top vendors?

Order a Copy of Automotive Fuel Injection System Market report here

About Us

Stratview Research is a global market research and consulting service provider, offering syndicated and custom research reports along with growth consulting services. Our business intelligence and industry research reports offer clients with insightful and actionable market data to aid strategic decision making. These exclusive reports are the result of exclusive research methodology and are available for key industries such as chemicals, composites, advanced materials, technology, renewable energy, and more. Stratview Research helps its user’s tract the ever-evolving market scenarios through its top-notch market reports.

Get in touch with us at – sales@stratviewresearch.com.Or connect with our experts at +1-313-307-4176

[wahid007posts]

Thermoplastic Composites Market - Key Players are Adopting Different Growth Strategies to Maintain Their Global Dominance

Thermoplastic composites are used in a variety of end-use industries, including aerospace & defense, transportation, wind energy, construction , consumer goods & electronics, sports & leisure, and others. Owing to its recyclability, fast processing,  and ability to remold into different shapes quickly, the demand for thermoplastic composites is expected to grow during the forecast period. However, amidst the global COVID-19 pandemic, the demand for thermoplastic composites from the industries mentioned above is expected to show a sharp decline in 2020 and would recover post 2020. The global Thermoplastic Composites Market size is expected to grow from USD 22.2 billion in 2020 to USD 31.8 billion by 2025, projecting a CAGR of 7.5% during the forecast period between 2020 and 2025.

Download PDF Brochure of the report: https://www.marketsandmarkets.com/pdfdownloadNew.asp?id=111944669

Browse 205 market data Tables and 48 Figures spread through 247 Pages and in-depth TOC on "Thermoplastic Composites Market”

Glass fiber composites comprise a major share of the composites market in terms of value and volume.

The glass fiber thermoplastic composites are cheaper as compared to carbon, basalt, and aramid fibers composites. Low cost, ability to blend with all the thermoplastic resins, ease of manufacturing, and comparable properties to other fiber thermoplastic composites are driving the growth of glass fiber thermoplastic composites in various end-use industries such as construction, wind energy, transportation, and consumer goods & electronics.

There is a high demand for glass fiber composites from the transportation, consumer goods & electronics, and wind energy industries. However, the demand for glass fiber thermoplastic  composites is expected to decline in 2020 due to COVID-19 that has enforced lockdown across national and international borders.  This has resulted in reduced automotive and consumer goods & electronics products sales. The recovery in the end-use industries would restore the demand for glass fiber thermoplastic composites during the forecast period.

PA resins accounts for the largest market share in the global thermoplastic composites market in terms of value and volume.

The high demand is mainly driven by the growing consumption of short glass fiber reinforced polyamide in transportation, sports & leisure, consumer goods, industrial, marine, energy, oil & gas, and construction & building applications. But, because of the lockdown situation occurred due to COVID-19, many floor workers are unable to work in manufacturing facilities, which has resulted in the reduction in output of resins and price fluctuations. Thus, the demand for PA thermoplastic resins is expected to decline in 2020. With the recovery of aforementioned industries, demand for PA based thermoplastic composites would rise gradually during the forecast period.

SFT holds a significant revenue share in the global thermoplastic composites market in terms of value and volume

High demand for SFT in transportation, consumer goods & electronics is driving the growth of the SFT thermoplastic composites market. China is the major market for SFT due to wel established automotive and electronics industries. However, the country being majorly affeceted by the pandemic, the demand for SFT in the automotive and electronis indutreis has reduced. The demand is expected to stabilize in 2021 and would increase with recovery of the industries.

The transportation end-use industry accounts for the largest market share in the global thermoplastic composites market during the forecast period in terms of value and volume.

The demand for lightweight thermoplastic composites is driven by the increasing emphasis on enhancing fuel-efficiency in the automobile industry. Thermoplastic composites are widely used in interior automotive parts, which include brake pedals, airbag modules, engine noise shielding, instrument panel carrier, trunk liners, and air intake manifolds, among others. The demand for thermoplastic composites in automotive and penetration in electric vehicles has been severely impacted by the COVID-19. However, the demand for the thermoplastic composites would surge with recovery of the global automotive and electric vehicle sectors post 2020. .

https://www.prnewswire.com/news-releases/thermoplastic-composites-market-worth-31-8-billion-by-2025--exclusive-report-by-marketsandmarkets-301104555.html

APAC is expected to account for the largest market share in the thermoplastic composites market during the forecast period.

APAC accounts for the biggest share of the global thermoplastic composites market. The electrical & electronics, automotive, and consumer goods sectors are the major consumers of thermoplastic composites in the region. North America is the second major consumer of thermoplastic composites. Aerospace & defense and automotive are the major industries fueling the growth of the thermoplastic composites market in this region. Moreover, the US is a manufacturing hub of various commercial, military, and private aircraft. However, the COVID-19 outbreak has affected the demand for thermoplastic composites in the region. On the positive side, the pandemic COVID-19 has instigated nations such as India to reduce dependency on imported goods and manufacture parts/components locally. Such initiatives coupled with recovery in the thermoplastic composites end-use industries will increase the demand for thermoplastic composites in APAC.

The key players in the thermoplastic composites market include BASF SE (Germany), Celanese Corporation (US), SABIC (Saudi Arabia), DowDuPont Inc. (US), Koninklijke DSM N.V. (Netherlands), Toray Industries, Inc. (Japan), and Lanxess AG (Germany). Among others. These companies are involved in adopting various inorganic and organic strategies to increase their foothold in the composites market. These players have taken different organic and inorganic developmental strategies over the past five years.

Early buyers will receive 10% free customization on this report.

Don't miss out on business opportunities in Thermoplastic Composites Market.

Speak to Our Analyst and gain crucial industry insights that will help your business grow.

https://www.marketsandmarkets.com/speaktoanalystNew.asp?id=111944669

About MarketsandMarkets

MarketsandMarkets is the largest market research firm worldwide in terms of annually published premium market research reports. Serving 1700 global fortune enterprises with more than 1200 premium studies in a year, M&M is catering to a multitude of clients across 8 different industrial verticals. We specialize in consulting assignments and business research across high growth markets, cutting edge technologies and newer applications.

Contact: Mr. Ashish Mehra MarketsandMarkets™ INC.  630 Dundee Road  Suite 430  Northbrook, IL 60062  USA: 1-888-600-6441  sales@marketsandmarkets.com

[sramfact]

The global automotive plastics market for passenger cars size is projected to grow from USD 21.1 billion in 2021 and is projected to reach USD 30.8 billion by 2026, at a CAGR of 7.9%. The demand for automotive plastics is mainly driven by the increase in passenger car production and the increasing utilization of automotive plastics in vehicle designs. Plastics offer a maximum weight reduction of automobiles, which in turn reduces carbon emissions. These could be the major reasons propelling the market. 

The shift towards use of bioplastics in vehicle production, use of anti-microbial plastics and additives, use of composites and PMMA and growing trend of vehicle electrification has increased the demand for automotive plastics across the globe. The development in 3D printing technology is expected to act as new opportunities for the automotive plastics market for passenger cars to grow. However, high cost of capital and infrastructure for re-engineering of plastics is expected to hinder the market growth during the forecasted period. 

The under-bonnet is the fastest-growing application segment of the automotive plastics market for passenger cars during the forecast period. Automotive plastics used in the manufacturing of under-bonnet components of passenger cars include Polypropylene, PBT, polyamide, and other engineered plastics. The use of plastics in under-bonnet applications provides high durability, high-temperature resistance, strength, and rigidity to automobiles. The under-bonnet segment includes components such as the battery, onboard chargers, connectors, cables, electric motor, anti-lock braking system, hoses, hydraulic booster unit, load-sensing valve, master cylinder, metering valve, fuel delivery modules, intake manifolds, brackets, duck work, accumulator pistons pressure differential valve, proportioning valve, and thermal management system which require plastics in their manufacturing.

BASF SE (Germany), SABIC (Saudi Arabia), LyondellBasell Industries Holdings BV (Netherlands), LG Chem (South Korea), DuPont (US), Covestro AG (Germany), Evonik Industries AG (Germany), Solvay (Belgium), Arkema SA (France), Borealis AG (Austria), among others are the key players operating in the automotive plastics market for passenger cars.