#Multi Monitoring Meter kit

[lindahaley123]

Multi Monitoring Meter

Abimed Multi Monitoring Meter measures glucose (20–600 mg/dL), cholesterol (10–413 mg/dL), uric acid (1.5–20 mg/dL), and hemoglobin (5–26 g/dL) with results in 8–15 sec. It requires a 0.5 µL sample and has auto-strip recognition, optional Bluetooth, and coding up to 49

[geotechharper]

GIM-10 Multi-channel Intelligent Resistivity & IP Meter: Redefining the Future of High-Density Electrical Resistivity Tomography (ERT)

1. Conceptual Foundations: Understanding Electrical Resistivity Tomography (ERT)

Electrical Resistivity Tomography (ERT) is an advanced geophysical exploration method that reconstructs subsurface resistivity distribution through intelligent electrode arrays. Unlike traditional ​DC Electrical Sounding methods limited to single-point measurements, ERT enables ​2D/3D Electrical Resistivity Imaging by analyzing spatial variations in electrical properties. The ​High-Density Electrical Method revolutionizes this process through multi-channel synchronous acquisition and automated electrode switching, achieving millimeter-level geological modeling accuracy.

2. Technological Evolution: From Conventional Methods to GIM-10’s Breakthroughs

2.1 Limitations of Traditional Approaches

ParameterConventional DC SoundingGIM-10 ERT SystemImprovementMax Depth500m1,500m+200%Daily Coverage<0.5 km²>5 km²900%Vertical Resolution5m@500m0.1m@1,000m50xData Acquisition Speed120 points/hour600 points/hour400%

Traditional systems face critical challenges:

Single-channel architecture causing low efficiency

Limited spatial resolution for complex geology

Inability to perform real-time 4D monitoring

2.2 GIM-10’s Core Innovations

2.2.1 10-Channel Parallel Acquisition Architecture

​Technical Implementation:η=10×(60n​)×log2​(m)Where: η = Efficiency multiplier vs conventional methods n = Parallel channels (10 in GIM-10) m = Electrode spacing grade

​Advantages:

600 points/hour acquisition speed

1,500m penetration depth with 3,200W power output

IP68-rated titanium alloy electrodes for 100m underwater operation

2.2.2 Hybrid Array Synchronization Technology

Combining ​Wenner-Schlumberger-Tripole configurations:ρa​=K⋅IΔV​

Dynamic K-value adjustment enables:

30% vertical resolution enhancement (0.1m thin-layer detection)

50% lateral coverage expansion

40% reduction per measurement cycle

3. Engineering Applications: Full-Scenario Solutions

3.1 Environmental Monitoring Cases

Project: Chemical Contaminant Plume Tracking Technical Metrics:

300×300m area scanned in 24 hours

Identified 3 chlorinated solvent sources (positioning error <1.5m)

4D diffusion model accuracy R²=0.95

Technical Advantages:

Real-time SP compensation (±10V range)

20-time-window IP analysis

3.2 Urban Underground Space Mapping

Case Study: Metro Tunnel Void Detection Results:

0.5m³ karst cavity detection at 30m depth

94% prediction accuracy vs drilling verification

60% cost reduction compared to GPR+drilling methods

4. Intelligent Data Processing Ecosystem

4.1 Forward Modeling Optimization

GIM Studio integrates ​FEM-BEM Coupled Algorithms:Model ComplexityConventional TimeGIM-10 TimeSpeed Gain3-layer geology15 minutes2.1 minutes86%Fault zone42 minutes6.8 minutes84%

4.2 Inversion Algorithm Comparison

Algorithm TypeResolutionTime CostMemory UsageConventional LSQ5m@500m120min8GBANN-Inversion3m@500m25min3GBTD-Inversion (GIM-10)1.8m@500m18min5GB

5. Technical Superiority & Sustainability

5.1 Unmatched Performance Parameters

​Voltage Accuracy: 0.3%±1μV (Industry-leading)

​Dynamic Range: ±48V (2x conventional systems)

​Noise Rejection: 120dB power-line interference suppression

5.2 Eco-Friendly Engineering Solutions

​Modular Cable System: 70% replacement cost reduction

​SPB900 Power Unit: 850WH Li-ion battery (85% carbon reduction vs lead-acid)

​OTA Updates: 10-year technical lifecycle assurance

6. Industry Prospects: The ERT Revolution

With GIM-10 deployment, geophysical exploration is witnessing:

​Efficiency Leap: 5km²/day coverage capacity

​Cost Restructuring: 40-60% operational cost reduction

​New Frontiers:

Geothermal reservoir characterization

Carbon sequestration monitoring

Submarine cable route optimization

Experience the Future of ERT Technology

Featured Configurations:

Standard Package: GIM-10 Host + 100 Electrodes + SPB900 Power

Advanced Kit: Underwater Detection Module + Borehole Adapter

Technical Support:

Global case study video library

Customized array configuration services

Field operation training programs

Explore GIM-10 Specifications

[atplblog]

Price: [price_with_discount] (as of [price_update_date] - Details) [ad_1] From the manufacturer IMPACT by Honeywell CCTV camera kits Image clarity that makes it easy to spot violations The ultra-clear images generated by IMPACT by Honeywell CCTV cameras makes it easier to identify suspicious activity and security violations, by capturing details that are missed at lower resolution. Dependable quality, and value that goes beyond expectations Impact by Honeywell CCTV cameras maintain the quality of video feed over long distances, even when coaxial cables are used for the transmission. Peak performance across varying conditions Features like built-in analytics, IR cut filter, digital wide dynamic range, auto backlight compensation - and much more – make IMPACT by Honeywell CCTV Kits a true one-stop solution. Ideal solution for remote monitoring Impact by Honeywell DVR stores the video feed captured by the CCTV cameras .The videos (live feed + playback) are accessible via IHDVR app at your convenience. Advanced monitoring with multi-channel playback Available in 2MP resolution, with both dome and bullet form factors, and compatible with all major video formats. Live View, Record and play back video on multiple channels at the same time with the high speed core processors. Various applications, to suit every need Impact by Honeywell CCTV Kits are easy to tailor to the needs of banks, offices, industrial sites, warehouses, parking lots, retail shops, bungalows and more. Impact By Honeywell 2MP AHD CAMERA- CMOS progressive scan, Minimum illumination: 0 Lux (IR ON), TDN (IR-cut), AWB, AGC, 3.6mm Fixed Lens, IR Distance: Upto 20 Meters, Power: 12VDC, True day night capability .Ensures sharp, accurate and high resolution video quality. Made In India, Plastic Housing-White. DVR - 1080P high resolution support : AHD, CVI, TVI, CVBS supports H.265 / H.264 high profile compression. Playback 4 channels simultaneously & DHCP, DDNS, IE browser and CMS supported. Pentaplex operation: live view, record, playback, backup and remote access. Video Output: HDMI, VGA Suitable for Indoor, Outdoor, Home, Offices, Retail Outlets/Shops, Restaurants, Pre-school, Warehouse, Banks, Godown, Factory and more. CCTV Kit consists of 4 Dome Wired Camera, 1TB Hard disk, Power Supply, Cable Roll, BNC Connectors & DC Pin. For Technical Support Connect @ Email: hbt.mms@honeywell.com & Toll Free Number: 18001034761.Installation is not included.

[awpro]

Introducing All New Hollyland Cosmo C2 

The Hollyland Cosmo C2 Wireless Video Transmission System is engineered with advanced transmission capabilities for professional broadcast and video production. This wireless system includes two transmitters (TX) and a dual receiver (RX) unit, also equipped with a V-mount battery plate for streamlined workflow. It supports dual-camera setups, enabling the transmission of two video feeds to a director’s monitor or multiple displays1.

Key Features

2TX & 1RX Solution: The Cosmo C2 facilitates transmission between two transmitters and one receiver, reducing the number of devices and cables needed, minimizing wireless interference, and ensuring better synchronization of video feeds for a more productive workflow1.

Dual SDI and HDMI Outputs: The RX unit provides two SDI outputs and two HDMI outputs, which allows simultaneous distribution to two monitors or a single dual-view display1.

UVC Output for Streaming: The transmitters of the Cosmo C2 offer UVC output for direct connection to computers without additional converters.

NDI Compatibility: With its LAN port, the system supports NDI for integration into IP-based video workflows1.

Flexible Power Options: The TX units can be powered via a DC barrel connector or V-mount battery, providing adaptability to different on-set power needs1.

Upgraded Range and Performance

The Cosmo C2 features an impressive operating range of up to 1000 meters (3280 feet), significantly exceeding the 300-meter (984-ft) range of the Cosmo C1. This extended range makes the Cosmo C2 ideal for large-scale productions requiring strong and stable video transmission1.

The Cosmo C2 also has a lower latency (33ms) compared to the Cosmo C1 (40ms). However, the Cosmo C2 has a lower bit rate (Up to 12Mbps) compared to the Cosmo C1 (Up to 20Mbps).

Where to Use

The Hollyland Cosmo C2 Wireless Video System is designed for diverse professional settings, offering versatility across industries:

Film and TV Production: Provides stable video transmission between cameras and director’s monitors, even on large sets.

Live Broadcasting: Delivers real-time video feeds to control rooms or on-air monitors with low latency.

Event Coverage: Suitable for multi-camera setups at live events such as concerts, conferences, and sports matches.

Live Streaming: UVC output enables seamless computer connectivity for high-quality streaming with multiple cameras.

Drone and Gimbal Operations: Its compact design and extended range make it ideal for aerial and stabilized camera setups.

Corporate Video Production: Ensures dependable multi-camera functionality for training videos, presentations, or virtual events.

Theater and Stage Productions: Supports monitoring and signal distribution in large venues for enhanced production coordination.

Kit Contents

Cosmo C2 Wireless Video Transmitter*2

Cosmo C2 Wireless Video Receiver*1

Blade Antenna*7

12V/2A DC Power Adapter*1

USB-C OTG Adapter*1

Expansion Accessory*2

Cold Shoe*2

Warranty Card*1

User Manual*1

Packing List Card*1

With dual-transmitter functionality, multiple output options, and an extended range, the Hollyland Cosmo C2 is a reliable solution for filmmakers, broadcasters, and live event professionals, ensuring performance across various production scenarios.

The Hollyland Cosmo C2 is available at AWPRO Dubai and was launched on 13 Feb 25! AWPRO is an authorized Hollyland distributor, providing cutting-edge wireless transmission equipment for professional audio and video production. Visit AWPRO for the most advanced video transmission equipment or the best Hollyland wireless microphone in Dubai.

[oceantrust01]

Best Dive Computers of 2024 | Chosen By A Expert Diver

Ask most divers the one piece of equipment that they will never dive without, and it is likely to be their trusty ol’ dive computer. The dive comp is often the diver’s best friend, containing crucial information that will make the dive safe and enjoyable. However, not all dive computers are created equal! From the basic comps that give you standard information like NDL and depth to the fancy comps that technical divers use, your choice should reflect on the type of diving you do, your budget, and personal preferences. Also, many dive computers are worn watch-style, but console-type comps will be used as part of your SPG.  Fret not, we’re here to help you out! Here are all of the dive comps that are popular with the diving community that we are proud to be a part of!  1. 🌟 Best Dive Computers of 2024 Mares Genius Air Integrated Computer with LED Transmitter Our Rating★★★★★ The Mares Genius Air Integrated Computer is great for technical divers who use Trimix and Nitrox mixtures with multiple changes and want to optimize decompression and bottom times depending on gas supply.  The interface is easy to use, with an intuitive design and large buttons. It also has a Bluetooth connection for your smartphone, and the battery is rechargeable. The kit comes with the Mares LED tank module that allows you to transmit pressure measured from the tanks directly to your dive computer, letting you know the level of gas using a color code system.  Specifications Included Components: Dive computer, LED transmitter Battery Life: 40 hours Weight: 1.9 pounds Price: US$1,527.90 Suggested users: Technical divers  Garmin Descent Mk3i  Our Rating★★★★★ A dive computer is a watch-style tool with an AMOLED display, scratch-resistant sapphire lens, and titanium bezel. With a 200-meter dive-rated case, this watch can satisfy both technical and free divers.  The enhanced SubWave sonar technology allows diver-to-diver messaging for up to 30 meters and monitors the tank pressures and depth for up to 8 divers. The LED flashlight has variable intensities and strobe modes.  There are also DiveView maps that offer bathymetric depth contours and more than 4,000 dive sites. Lastly, the multi-band GPS technology helps you gain positional accuracy while out of water, while its built-in ABC sensors help navigate every part of your dive when you’re underwater.   Specifications Included Components: Dive computer, silicone band, adjustment strap, USB-C, documentation  Material: silicone Weight: 3.72 ounces Price: US$1,443.75 Suggested users: Experienced divers Oceanic Pro Plus X Dive Computer with QD Hose Our Rating★★★★★ Simple and to the point, this dive computer gives you all the necessary information without being complicated. The display is bright and easy to read, adaptable in both sunlight and night diving.  It has a dual algorithm system where you can choose the best method of measuring your NDL. There’s also a push button ocean glow backlight, a smart glow backlight sensor, and an audible alarm when you get close to any of your limits.  Specifications Included Components: Dive computer Material: Plastic Weight: 2 pounds Price: US$1,199.95 Suggested users: All levels Shearwater Research Peregrine TX Air Integrated Color Dive Computer Our Rating★★★★★ With a full-color, large, and easy-to-read LCD screen, the upgraded Peregrine TX is designed for the recreational sport diver. There’s also an option of wireless air integration with a transmitter that allows real-time gas pressure data and accurate time remaining.  It also has a tilt-compensated digital compass, which the original Peregrine doesn’t. The Bluetooth wireless connection will make dive data tracking easier through the Shearwater Cloud.   Specifications Included Components: Dive computer, wireless charger Material: Plastic Battery Life: 30 hours of diving Weight: 16 ounces Price: US$1,000 Suggested users: Sport divers Aqua Lung i550C Dive Computer Our Rating★★★★★ This is an easy-to-use and versatile dive computer that’s suitable for both experienced and new divers. It comes with a pre-dive planning feature that allows you to preview planned dives. The i550C is equipped with gas integration, Nitrox and Gauge modes, backlight technology, and gas time remaining.  There are audible alarms and additional high-visibility LED warning lights. You can access History Mode, which includes your dive data like the total number of dives, max depth, total dive hours, and lowest temperature.   Specifications Included Components: Dive computer Weight: 1.3 pounds Price: US$699 Suggested users: All levels  Shearwater Tern Color Wrist Dive Computer Our Rating★★★★★ Small and compact, the Tern is flexible and can be used whether you’re snorkeling in sunny tropical areas or diving into much deeper explorations. The dive computer will adjust its brightness and sharpness accordingly, making it easy for you to check your status and focus on your dive.  The dive computer also has a Bluetooth integration that can sync effortlessly with your tablet or smartphone, keeping your dive log accessible.  Specifications Included Components: Dive computer Material: Aluminum Weight: 0.6 pounds Price: US$650 Suggested users: All levels Garmin Descent G1 Our Rating★★★★★ The rugged, watch-style dive computer comes with a sapphire lens and silicone bands for maximum durability. It has GPS/GLONASS/Galileo support, so you can mark your entry and exit for your dive log.  It tracks your activities with 30 built-in sports apps and you can use advanced training features like the VO2 Max to see how your body is responding to diving or training. You can also monitor your heart rate, pulse, and sleep score to give you more insights into your health, in and out of the water.  You can also pair this with your smartphone to give you notifications and access to up to 200 dive logs.    Specifications Included Components: Dive computer, charging/data cable, documentation  Material: Silicone Battery Life: 25 hours of diving Price: US$549.99 Suggested users: All levels  Cressi Leonardo Our Rating★★★★★ This is the second generation of Cressi’s original dive computer, Cressi Leonardo. It comes with better readability and a more audible sound alarm compared to the previous version. The single-button dive computer is an effortless model for divers who only want simple data.  It’s equipped with comprehensive Nitrox management, depth gauge mode, RGBM Algorithm, and Deep Stop feature for safety. You can also get the additional BT Interface to download the dive log to your smartphone via the Cressi app.  Specifications Included Components: Dive computer   Material: Various Weight: 0.4 gr Price: US$239.95 Suggested users: Budget-conscious divers 2. 🤔 Final Thoughts Whether you want something basic and affordable or treat yourself to something with all the bells and whistles, there’s a perfect dive comp for you out there. Have fun and stay safe diving!  Read the full article

[rprservicesllc]

What Are Tools & Equipment Used For Different Work Orders?

Property preservation companies know that having the right tools is one of the most essential aspects to finish any property preservation work order job properly. The company focuses on keeping inside and outside of the property in a suitable condition by repairing the damages. Property preservation business is all about preserving the property from any internal or external issues, repairing the damages, and maintaining the authenticity of the property. To perform any work orders efficiently, one needs to know the precise tools used for the right work order.

Being a professional is one thing, but knowing the correct tool for a particular process is solely another matter, and an expert should have the precise knowledge of every means and how to use it.

Necessary tools for every work order:

Camera: Digital camera with date and time on the photos, 2 Sets of extra batteries, extra memory card Cell phone Laptop with internet Drill machine: Cordless drill, corded drill, drill bits, and spare batteries Flashlights: 2-3 flashlights, extra batteries Extension cord: one 100′, two 50′, or 25′ Saws: Skill saw, reciprocating saw, chainsaw Screwdrivers Hammer: Sledgehammer, claw hammer Rakes Generator (size:3250 KW) Air compressor (size: C2002 wk) Pressure test kit Trailer for debris removal Shop-vac Ceiling fan duster foldable ladder GPS with a car charging cord Tools and equipment for property preservation inspection: Testers: Electrical testers, AFCI/GFCI tester, Carbon monoxide tester, humidity tester Voltage indicator Flashlights Half-face and full-face respirators Detector: Voltage detector, combustible gas detector Moisture meters Continuous radon monitors Cameras: Infrared (IR) camera, digital camera, snake camera Telescoping magnets Telescoping adjustable mirrors Compass Clothing: Safety glasses, electrical gloves, roof boots, kneepads, Shoe covers Toolkits: Power screwdriver, power drill, tool vest, Knife, and multi-tool, screwdrivers, measuring tape, Binoculars Ladders: Telescoping ladders, articulating ladders Thermometer Extra batteries and light bulbs A computer and home inspection software Stationery: Pen, notebook, and Scale Tools and equipment for winterization: RV antifreeze: 2-3 gallons Shut-off valves: 1/2″ & 3/4″ Caps: 1/2″ & 3/4″ Plug: 1/2″ & 3/4″ Wrenches: Pipe wrenches, crescent wrenches Specialty pressure test gauge Zip ties Black markers: 2 1-2 rolls of duct tape Air compressor: 25-50′ length and 3/8″ diameter hose Garden hose: 25′ Tools and equipment for lawn maintenance: Shears: Pruning shears and hedge Shears lawn mower weed eater Pole pruner brooms leaf blower shovel hedge trimmer gloves rake Tools and equipment for maid service: Mop Water container Shop-vac Duster Paper towels Regular vacuum Pine-sol Oven cleaner Glass cleaner Tools and equipment for debris removal: Flat shovel: Large Equipment’s for dusting: Brooms, dustpans, Dump trailer or dumpster For personal wear: Gloves, dust masks (25-100 pack) Ratchet straps: 16′ Hammer: Mini-sledge hammer Garbage bags: 2 boxes Garbage cans: 2-4 heavy-duty

RPR Service is a property preservation work order processing and updating company, specialized in analyzing the photos, preparing PCR, and submission of the most relevant bids with the full documentation for the damages incurred at the property.

[circlekirrigation]

Critical Components: Choosing the Best Wheel Line Parts for Your Irrigation System

If you're a farmer or grower relying on wheel line irrigation, having the right parts can make all the difference in efficiency, and performance, and avoid costly breakdowns. When it comes to wheel line irrigation, high-quality components are essential for distributing water evenly, minimizing waste, and keeping your system running smoothly season after season.

Critical Wheel Line Parts for Maintaining Your Automated Irrigation System

Here’s a list of the critical wheel line parts:

●      Wheels and Wheel Drive Units

The wheels on a wheel line parts do more than just roll the irrigation line across a field. They also power the system through hydraulic or electric wheel drive units. Selecting durable, high-traction wheels ensures the system through hydraulic or electric wheel drive units. Selecting durable, high-traction wheels ensures the system can reliably maneuver all kinds of terrain. Meanwhile, the wheel drive unit provides the rotating power to turn the system’s water delivery pipe.

●      Hubs, Couplers and Elbows

The hubs, couplers, and elbows are the connectors that join sections of pipe together and allow them to pivot. Galvanized steel fittings withstand corrosion better than plastics. Look for quality materials, thick walls, and secure joining to prevent leaks at connection points. Avoid undersized fittings that could get clogged and restrict water flow.

●      Sprinklers and Spiders

Sprinklers distribute water evenly along the length of the Irrigation line. Rotating multi-stream sprinklers cover more areas more efficiently. Durable sprinkler construction prevents them from breaking off if the line is dragged. Meanwhile, spiders stabilize the sprinklers and space them properly along the line. Durable mounting arms and robust spider materials like cast iron prevent damage from pressure surges.

●      End Gun and Hose Drag Equipment

An end gun significantly expands the coverage of a wheel line system. Large-area sprinklers can do automated irrigation over 200 feet beyond the last regular sprinkler. A hose dragging kit prevents hoses from tangling when reeling the end gun. Select durable end gun connections and a study reel that maintains smooth operation.

●      Controllers

The controller operates the automated system by opening and closing valves according to set schedules. Getting a smart WiFi-enabled controller allows monitoring and adjusting of schedules from anywhere using a smartphone. Simple programming ensures proper operation. Backup power options guarantee uninterrupted operation during electrical outages.

●      Monitor Water Application

To maximize efficiency, you must regularly monitor system water applications. Flow meters help determine proper sprinkler spacing and overlap. Pressure gauges identify worn nozzles or check valve failures before they compromise performance. Moisture sensors tell exactly when to irrigate, preventing over or under-watering healthier plants.

Consult with the Best Irrigation System Expert

Combining high-quality commercial-grade wheel line parts creates a heavy-duty automated irrigation system that maintains healthy yields year after year. Consult irrigation experts to select components suited to your specific field shape, size, terrain, and crops. Properly designed and maintained wheel line best irrigation systems provide consistent coverage, optimal efficiency, and seasons of reliable service.

[idris-hunts-the-mando]

Right place, Right time  \the departure pt.1/

Rating: Mature

Words: 6.1k

A/N:  this took me the bulk of a week to complete, i think ill make a few small bite sized works for a while, working on the next part in a week or so, once i get myself back together. give me all the love you as a reader can, I’m fueled by praise/hj 

pairings: none yet

Warnings: series typical violence, hard swearing, moderate gore

I woke up sore and hurt in the bunk room, the cold cot felt like frozen river stones under my tired bones. I could tell we arrived at our destination from the frostbite settling into my fingers and nose. The slow neutral hum of machinery was a tell tale sign that the ship was at ease, the noise usually deafening. Pulling my threadbare scarf up over my neck and chin, i started regretting choosing this particular cargo ship going to a frozen planet for a runaway plan. I braced for the aggravating beginning to the tiresome day and sat up from my cramped bunk space. sleeping in a room with a dozen oily work worn men didnt make any part of the trip to Maldo Keris easier, not to mention the fact they all saw me as more of a womp rat and less of a sentient being. keeping my eyes to myself, i shoved my tattered boots over my feet buckled my tool belt to my hip and hurried out of the barracks before the bulk of my crew mates woke up. stepping out onto the loading dock,i took a breath in. the smell of poorly filtered air irked my mechanics brain. It would be such an easy fix if they payed me to care. But alas, for this particular voyage, i was bunked out like a stowaway, giving in return my fix-it help around deck for passage off my planet of origin. Sighing out the musty air, i checked my stations. Navigating the hold was like a womp rat through a maze, you had to be rather nimble and graceful to get through the makeshift corridors without issue. Unluckily for me, I was neither nimble nor graceful. When i got to the panel, i took out my key ring and unlocked the rusted metal door to expose the intricacies within. the wiring looked tip top shape, but the fuel lines needed a bit more attention than the other tangle of electronics, so i took out my multi-tool to tighten the fittings. The liquid distilled Rhydonium that flowed through these particular lines was a less explosive substance than its pure form, but dangerous nonetheless. the multi-tool was a newer model, so it didn't fit this type of bolt all the way, but it was better than nothing. Better than allowing it to loosen over another voyage and have the ship explode mid hyper-speed.

  My mind was so stuck in its own world, the training I had over the many years in a scrappers shop spewing all of its knowings about rhydonium and fuel lines that I didn't have time to notice the first lieutenant Maegs stalking his way over to me. I jumped a moment before he spoke, tightening the last half inch of the bolt down maybe a bit too aggressively.

  "We the captains crew appreciate the helping you've been do'en for this ol beasty of a ship," he mentioned, one his independent eyes viewed me separably, while the second one was monitoring my work. I froze for a moment out of fear, but i didn't think he took notice. "You're more than welcome to stick 'round 'an see what else you can fix up for this rust-bucket." the first lieutenant never gave me much of a hard time, unlike most of the crew. But I had made up my mind the first night in hyperspace that I would haul ass out of this suffocating ship as soon as a habitable planet was spotted. I finished up closing and locking the wires box, shaking my head slowly and turning to face him.

  "I do love the sentiment, lieutenant. but maybe another time if our paths cross again." I forced an obligatory smile, avoiding making eye contact with him at all costs out of fear for not having the attention span to pick and stick to a wondering eye. If i could ever force myself to say something nice about the ship and its crew, it would be the acceptance of short interactions. A conversation rarely surpassed the 'how are you doing today' phase, by the moons it never got to that phase in the first place. And I was a person of not many words, and not much of a filter.

  Maegs nodded slowly, clasping two of his 4 arms behind his back and turning away. I felt the need to repay his unprompted kindness with some suggestions for the ship before I left it for good. Call me sentimental, but this ship, albeit mostly composed of literal blood sweat and spit, was my ticket into a new life. "don't let yourself get caught without changing the air filtration system, them new republic scouters are picky about what type of poison you use for cremates." I remark with a little smirk. Maegs paused, narrowing his eyes, amused by the backhanded remark. He had surely gotten complaints about the smell before. He gave a thoughtful nod toward me, and allowed himself a small smile. I looked down in my hands, the key ring still hanging off my index finger. I tossed it towards him and was relieved when he caught it. he turned with no further words needed. On his way to the control room, he pushed the cargo bay door release button. My line of sight was clear from the opening door to the nearby port town and when the frosty air stung my face, I knew in my soul that this was a good thing. Taking in a breath of the salted frozen air, my body naturally recoiled. I'm not one for cold. 'Ah well, way to go picking the nearest ice planet than idiot' I scolded myself, pulling my cloak back over my shoulders to take the first step out of the ship held together with sticker line and bantha spit. 'Good riddance'.

  Walking into town was harder than expected, the ice on the ground blended into the ice of the horizon, making spacial reasoning a thing of the past. The only anchor I had to the planet besides its heavy gravity was the stark grey buildings stapled to the sheets of ice about 10 meters in front of me. I never could have guessed the sky of Maldo Keris could get any uglier, but planets like these have a way of surprising a person. I tucked my hair and ears away with the hood of my raggedy travelers cloak, bracing myself from the heavy winds by retreating further and further into my cloths. I stayed on the worn path from the ship's dock port, hearing from previous crew mates that this was the warm season, that the ice was thinner and the creatures lurking underneath had no sense of remorse. Now nervous at the revival of that pleasant memory, I kept a close eye on my surroundings, not having the most faith in my feet for staying their course. The wind stung at my exposed skin, reminding me I was wearing only my work cloths that weren't  meant for the sudden change in climate. The cloak I had was best at protecting my human skin from the suns above. Beyond that, my tatterd outer layer didn't do much for the safeguarding of my body heat.

  I was relieved to have stumbled to shade from the wind so quickly, the heavy kit bag on my back was starting to feel more like a boulder taped to my body than a simple means of containing my tools and spare cloths. Paying attention to the signs overhead, i quickly located the nearest cantina and rushed towards it as fast as any human Popsicle can. Opening the circular doors with the press of a button took me into what felt like a summer time resort. Hiding my appreciation for the warmth from the patrons staring at me, i collected my composure and swiftly found an open table. The electronic doors closed rather harshly behind me. I recognized the sound of faulty pressure hinge and eyed the door for a moment when i took my seat. That door was a danger to customers who get caught in it, it could cause some serious injuries for larger species and even fatalities for humanoids.

  Sitting down at the frosty old wooden chair was a relief on the fatigue in my joints. It was neither a comfortable seat, nor a relatively stable one, but it gave me time to take off my pack and study the small, rather ugly, room I found myself to be in. It wasn't too long before I would have to order something, or I feared starvation. The crew mates on the cargo ship were kind, if the bare minimum counts. Food once a day (as per average in the parsec), and as much sleep as necessary per species or race. For humans in particular, that amount of time was annoyingly low. tired and hungry was a bad mix for me as it is, but add cold to that mixture, and the first person to get on my nerves would be the last. i checked the contents of my bag to make sure everything looked as it should and moved up from my chair, replacing the spot with my hefty bag. I was rather confident that if any Kung Nerfhearder tried to run off with it, it would be too weighted for them to get far. I may be rather small compared to other sub species of humans, but i pride myself on my strength often.

  Making my way to the bar counter, I lean up between two silent patrons sitting a few seats away from each-other. I get the barkeep's attention with a wave of my fingers, calling him to me. "What kind of meal do you have on the stove top right now?" I ask with my flattest low tone. In port towns like this its important to be as emotionless as possible in order to not draw attention to yourself. Colorless, shapeless, uniform and mad was always the role you had to play to make it through the galaxy.

  "We got a silver weed in the radiator, it'll be 3 credits." He replied, picking up a glass and wiping it out with his rag covered hand. I pulled the amount needed out of my pocket and set it down on the bar counter. he swiped his hand over the credits, picking them up quickly. nodding, he left the sight of the bar for only a spit second before returning to the table with a small bowl of mush. I tried my best to smile and be thankful for the meal, but as the bowl transferred to my hands I had to focus on not gagging. I hurried back to my private table in the corner and settled back into my seat, dropping my bag on the floor between my legs to keep it as safe as possible. The last thing I want is a soup that tastes like the scrapings of a persons shoe into street worn snow, but what can you expect on a planet such as this. Prodding the gelatinous mass in the bowl with my spoon, I ponder the ever growing question of 'what in the hell is in this shit'. my mind wonders deep into its personal wonderland while my environment continues to be less and less favorable.

     Hostile voices from the other side of the cantina rise louder and louder, as if at the warm up stage of a slowly progressing screaming match. The feeling of sourness in my heart rose with a predictable inclination. The tension in the air grows as yet again the same scene unfolds before my and all other patrons of the cantina's eyes. I strain my neck to see what was happening. At the far end of the room, closer to the door than I am, I saw the oddly familiar face of a poor amphibious creature's head being slammed on the table he was sitting at. The oldest and most primal of situations, the strong picking on the weak. Three tall imposing figures towered over the poor humanoid looking fellow who was obvious to any idiot to be lacking in intimidating features. Seeing this obligatory show of power for any insecure creature with anger issues never sat right with me. It reminded me too much of where I came from, the slums of sand and glass where bullies like these were treated like royalty without challenge from the ones they harassed.

     'Dank ferrik, don't do it' i challenged the assaulter internally, as if pleading with them to harm their victim any more so I would have a reason to put in use my blade skills. i had no idea where I've seen that face before, but as they say, curiosity killed the Cathar. And there it happened, the final action in the escalation. The largest of the assaulter lifted the poor guy to his feet and the ring leader lifted his knife to the throat of his victim. A cry of anguish and fear came from the poor fool being restrained, and that was my last straw.

     I stood from my chair, kicking away my bag and drawing my vibroblade from my thigh holster, walking over to the group across the tavern. I growl, squaring my shoulders and stiffening my legs to make me seem bigger. I must have looked pretty wild, my tattered cloak drawn over my body like a dark fog, and my scarf still pulled up like a mask over my nose with only my furious green eyes over the top. Just as I started my warpath towards the men, the heavy ring shaped door to the cantina opened abruptly, startling a few of the onlookers. I knew what type of situation I had put myself in and how important focus and intimidation was, so I didn't take any time away from the assholes with blades to gawk at who had happened to stroll in. With my attention solely married to the poor bastard and his assailants, I noticed all of their attention was stripped from their target and glued to the newcomer. Evaluating my surroundings, I saw most of the other patrons in my sight were enthralled too. This piqued my interest and I felt it safe enough to turn and check out the royalty.

     Standing soberly at the bar counter, the figure of a mandolorian stood in silence, facing the bar keep. My heart dropped first, than my jaw. Only legend, only in the oldest fables and the scary stories my nan would use to scare me into not stealing the sweets late at night, had I ever heard of the likes of him. from the bescar armor forged in the heart of a black flame forge (or so i've been told) to the galaxy known creed of mandalore, this being was the stuff of leadgeneds. To be feared and adorned wherever they so chose to walk. but not anymore. Not since the planet turned to glass a hundred years ago, destroying much of what was known of the infamous warriors.

     I don't think the aggressors saw me and the dangerous piece of weaponry clasped in my hand, instead they looked drunkenly amused at the new patron, like sly cats with a new toy. surveying his surroundings, the warrior's expressionless visor swept the room. He inspected the threat levels of the patrons, the bullies, the amphibious humanoid sucker that was caught under it all. The mandolorian made no comment as he momentarily swept over me, with my clenched fist around the vibroblade. Rather he ignored me entirely, leaning against the bar counter and staring absentmindedly at the wall ahead of him. The scum saw this as an odd mandolorian intimidation tactic and took it to heart, growling a string of multilingual insults. I couldn't quite understand all the words from their  chosen dialect, but something about a drink spilling and how it was somehow the mando's fault.

     when they didn't get a response, they snorted, puffing their chest out and stalking towards the armored newcomer. Continuing to talk in another language I didn't understand fully, the bar keep attempted to translate, feeling the tensions rise in the air. "He says you spilled his drink." a moment of silence, with the smell of anger wafting from the half intoxicated bantha shaggers, And the barman attempted to diffuse the situation by offering the men drinks to hopefully get them to settle down. And by the two suns it did not. The drink slid from the barkeep's hand and down the table. The mandolorian took it out of its trajectory and started the assault, smashing the creature's head on the counter to his right and simultaneously twisting the louder man on his left arm until the knife in his hand stabbed himself in the ass. As the third attempted to run out the front door, mando caught him with his grappling wire and pulled him back. The tangled creature got his blaster from a thigh holder and shot a round at his would-be captor. The blaster fire ricochet off the bescar Armour, bringing the mando's attention to his own firearm. With the tangled assaulter in the right position, mando fired a single shot at the door of the cantina, Forcing the wiring to go into hyperactive shut down, closing the doors around the alien. The doors struggled for a moment, and so did the thing caught in it, but nothing stopped the metal and electricity from slicing through the meat of its body. The legs of the now dead man fell to the ground at the door with a sickening thump.

     After this, the silence in the room was so thick you could swing at it with a hatchet and not make a dent in the shock factor. unsurprisingly enough, every patron went back to their own businesses with each other as if nothing had happened. A pair sitting at a table close to the door went swiftly to the half body to move it away to continue the flow of traffic as they then scurried out the doors, carrying the top half between them. Scavengers i bet, black market womp rats' i thought, sighing at how quickly the circle of life can flash before your eyes. death isn't something to be dewlled on in a universe like this, now back to the issue at hand.

     recollection hit me like a half ton of bricks when I remembered where I saw the face of the teal looking bastard with a knife previously on his neck. Spite flooded in my blood as I narrowed my eyes at my next target, shoving my vibroblade back in my thigh holster aggressively and stomping towards the useless excuse of flesh. "You're a dead man now, Mythrol." I said to myself. he must have heard me, or possibly sensed all the rage walking swiftly at him. His eyes upturned towards me, full of fear, but I now remember there is an ugly smugness to him too. I made it to the table, putting my hands down in front of him, leaning my top body weight on my palms. "You better have a divine excuse for not meeting me at that port you Druk Nerfhearder, or you'll be seeing the wrong side of the ice ocean outside in 30 seconds." I could barely contain my frustration with this sniveling worm, he was the reason i had to bunk with the disgusting oiled engineers for a week in hyperspace. The reason I had only 12 credits in my tech vault and less than that on hand. He scammed me out of a decent ride and my entire years savings. It was a genuine miracle how well I kept myself from not leaping over the table he sat at and giving him a new meaning to crazy bitch.  

     "H-hey, hey you, long time no see huh, man am I sorry for missing out on that meting we had that one time, sorry pal I kinda slept in-" but before he could make up any more exuces, any more lies, my vibroblade was at his throat right where the other man's was just a moment ago. He hissed and recoiled back in his seat, opening and closing his mouth a few times, trying to breathe, to speak. whichever it was, it wouldn't matter soon. He had talked enough in his lifetime to anger hundreds of poor victims throughout the parsec, letting him one last word would be a dishonor to all of them.

     Before I could press the blade into his flesh, a firm leather covered hand wrapped around my forearm, pulling it away carefully. I looked at the arm, attached to it was a shoulder, and atop the shoulder sat a gleaming bescar helmet. I felt my heart sink into the depths of my stomach, the anger switching places with feral panic that I tried my absolute best to contain. No words came from the mandolorian, a simple shake of his head was all i got. he loosened the grip on my arm, letting it recall back to my center of gravity.Ii looked down at the arm, looking for any obvious signs of damage, but his grip was closer to gentle and firm than harsh. A soft metallic thud brought my attention to the table, where the mando has tossed a puck. A bounty puck. Today was certainly a day for emotions, because T felt as pleased as a jawa coming across the flashing screen of Mythrol's face on the holographic screen projected by the puck.        Mytrol looked between me and the mandolorian a few times before painting his face with a fake smile, the wheels in his head turning into overdrive trying to make a lie up to get himself out of this one. "Is that me?" he questioned, the forced denial barely hiding the fear in his eyes. "Aw come on, I can pay you more than that pitiful bounty, a whole new cruiser," he pleaded, bargaining for his life. "on me, waddaya say."

     The mandolorian doesn't waste a breath to reply, his electronically filtered voice filling the getting-to-be awkward silence. "I can take you in warm." he placed a hand on his hip holster, bringing attention to the deadly gun strapped in it. "Or I can bring you in cold." Mythroll's face turned pale with fear, looking like a sort of pale blue spirit. Gulping down what could have been vomit, or another plea for life, he couldn't move at all, just staring at the mandolorian's unfeeling visor.

     The mandolorian slaps restraints on mythrol's wrists, pulling him up and out of his chair in one swift motion, the disparaged lump following along with his hands bound together. He seemed resigned to his fate as he was pulled out of the cantina, leaving in his wake and eruption of whispers and a few sobs of relief from the clientele of the bar. I myself was in a state of shock by what had happened and the intense speed at which it had occurred, Standing in front of a table with drops of blood on it not knowing what to do next. Mythrol had cheated me out of a lot of money, and he was just walking away, atoning for crimes he didn't commit against me. that in and of itself felt somewhat fair, fair to any of the galaxy he had screwed over so far.  

     My body flew back to my table mostly on its own, smashing into the chair at which I had just been sitting less than a minute ago. I hauled my ridiculously large bag over one shoulder, the extra strap free in the wind. I knew i had to at least try. for myself. Running back to the door panel where the halfed creature had met his end, I slammed the controls urgently, opening the door back out to the wild wind of Maldo Keris. Scanning the nearby environment was hard without protective goggles to shield me from the dust and yuck in the wind, but I spotted a pair of hulking figures 15 yards from the cantina, moving at a steady pace away. Try for me, I can do this one thing for myself. I sprinted as fast as I could with the pack over one shoulder, making me surely look like some sort of lame bantha to any possible onlookers. "Wait! wait please!" I called out to the mandolorian, my tone accidentally becoming demanding, but I think that helped to get the mandolorian's attention. They stopped and Mythrol looked at the mando, as if he was pleading to get him away from me in fear I had came back just to fight a mandolorinan for a chance to stab him again. As tantalizing as that thought was, the actions I were taking were purely selfish. I deserve justice just as much as any poor sap sad enough to cross paths with the scamming womp rat or the mystery person who called for the bounty.

     "Please let me come with you for when you collect his bounty." I asked somberly, stopping my chase a few paces away from the pair standing together. "I swear I wont take the credits from you, I just want to see him pay for what he's done." Tiny beads of sweat pearled at my brow, my breath was labored in my throat. Even walking with my bag was hard, but I had just chased down a bounty hunter and his captive. Strands of my hair stuck to my forehead and I wiped them away with the back of my forearm once they crept into my eyes.

   Mytrhol had to get his two cents in of course, holding the bounty hunter by the cape and making his eyes go wide with worry. "I don't know who this person is, don't let them come along, they could try to hurt me!" He plead, tugging on the cape like a whiny child. Now the anger came back, a cold rage in my fists, ready to start brutalizing someone at the drop of a pin. I narrowed my eyes at Mythrol, who didst bother to return the look. the mandolorian stared for a moment, looking off behind me in thought. The worry then set in, a fear whispered in the back of my skull 'You'll never get your closure and die alone on this hell planet.' My eyes went to the obsidian visor of the mando, creasing my brows together, subconsciously chewing on my lip as he made his decision. Loosening his shoulders, he slumped his head downward, as if morally defeated. I was taken aback by the conflict he was having about weather or not to let a weird stranger aboard his ship or not. oddly enough I understood his seeming frustration, I wouldn't let me go if I were him. He picked his head up after a second, looking me up and down as if to study me entirely. I felt eyes over my body, it was weirdly intimate. When he made his way back up to my eyes, he stood in silence for a moment before asking. "Do you have any weapons on you besides the blade?"

   Certainly a different question than what I thought was going to be asked, so for the answer, I had to think about it for a moment, mentally going through my bag and person. "n, no. I have my vibroblade. and a sack full of my electrician's tools, but they arn't traditional weapons." I responded earnestly, my tone going flat again. Another moment of silence, Mythrol looking quickly between the bounty hunter and myself.

   "If you truly wish to see the bounty delivered, I can take you to the trade. In exchange for the ride there, my ship needs mild internal repairs. If you try to cross me," He paused, a hand went to his blaster as a warning. A flashback to the cantina entered my forethought, the image of his hand on his blaster the same way as it was now moments before a man got cut in half. The warning was received properly, I felt thoroughly intimidated. "You'll be dead before you could pray to any gods." damn. That was intense. thoroughly intimidated, to the core. i took a breath in, almost allowing myself time to rethink my request in its entirity. but i responded with a quick nod. I knew my way around most ship interiors, if the ship wasn't rusted and breaking in half on take off, i knew i'd be able to mend it.

   The mandolorian gave no other word to me and turned, walking towards the ice flats docking crew. I allowed myself a cheeky smirk, fulfillment at the succession in my pursuit gave my heart a good warm squeeze. Following along behind the mandoloian a pace, he negotiated with the docking crew, asking oddly enough for a live pilot, not a droid. Some harmonic whistling came from the ferryman, hailing over a rust bucket of a speeder. As the speeder came to a stop to collect its haul, rusted pieces of under backing fell from the rear, clanking to the ice annoyingly. We all loaded into the speeder, I sat in front with the driver, the mando and his bounty in the back, a gloved hand around Mythrol's bicep at all times. We reached out frozen destination, the driver of the speeder calling one last warning to the three of us after collecting his dues and puttering off towards the port.

   I took a moment to asses the hull of the razor crest, it wasn't too bad for a pre new republic vessel. Some battle scars here and there around the landing gear, a charred blaster fire mark on the windows of the cockpit. This was truly the ship of a bounty hunter. Turning to follow the speeder's course, I couldn't help but feel a deep unease, he had warned about the ice planet's personal creature of death, Ravanack. Just then, the entire rusty hull of the speeder and its driver were swallowed whole in a single angry bite. The ravanack retreated back into the ice just as Mythroll let out a girlish scream of terror. He booked it twords the mandolorian who was opening the hatch to the belly of his ship, screaming for dear life to let him in. The ice where the speeder was swallowed started cracking in the direction of the ship, very quickly speeding directly at Mythrol.

   My instincts kicked in and I hopped out of the way, swinging myself onto the floor of the cargo hold of the ship with the momentum of my bag. Just as i got out of harms way, the mandolorian swung himself out of the ship to grab the petrified blue idiot only moments before the jaws of his early death lunged out of the ice, driving sickeningly deep into the landing gear of the razor crest. I winced at the damage done, scrambling back away from the flying Mythroll the mando had haphazardly chucked at me. The mandolorian seemed to ignore me entirely, herding his bounty into the cockpit with him. As the engines revved and the propellers blasted their heat down towards the ice at max capacity, the beast clung tightly to its prey of metal and paint, determined wholeheartedly to bring the ship down to its frigid death. The mando hopped down the ladder, rushing to the cargo bay door with his riffle. he stabbed the bayonet into the beast's head, sending a current of electricity into its skull. the beast roared furiously, releasing the ship and sinking back into the inky ocean.

   I collected myself and scrambled up off the floor. the cargo bay doors closed quickly, leaving the mandolorian and myself in the ambient humming of the bay. His breast plate rose and fell, getting less an less noticeable as he calmed down. turning towards me. He nodded at a upturned metal basket with a weather worn blanket tossed over it. I took the hint and put my bag on top of the makeshift stool, retrieving from it my more universal tools. Going from one job to another wasn't my ideal, but this was a more opportunistic adventure. My original goal was only ever to get off the sun bitten planet i was from, beyond that was up to fate, and I can't really complain about where it took me today. Now i'm headed to gods know where with a mandolorian and his bounty who single-handedly ruined the last year and a half's hard work I had done. turning my head towards the mandolorian, I saw him stand in the hallway between the cargo bay and the cockpit, eyeing his bounty.

   Words hung on the end of my tongue, ready to ask millions of questions out of pure adrenaline fueled thrill. But I stopped myself from spilling over, taking notice of the details in the mando's body for the first time. For the most feared warrior in the galaxy, this man looked as any other bounty hunter. His armor was chipped and dented, highlighting the flaws in the outer most shell of himself. A deep rooted curiosity took roots just then, desiring to know more of what laid under his iron and bescar plates. "Where should I start working first?" I asked as politely as possible. feeling a need to use respective words when in the presence of a man who just stabbed a water beast in the head. This got his attention away from the bounty if only for a moment. He paused for a second, going through the archives of his mind to see where needed the most urgent attention. Turning 180 degrees, he lifted a gloved hand to point at the panel of buttons and levers at the end of the metal room. It looked mostly in tact, but only mostly. There was blaster char at the center of the damage, near the bottom left hand corner of the panel itself. "Yikes." I whispered mostly to myself, reaching in my bag for a clean oil rag. Acknowledging the mandolrian's request with a glance and half nod, I got to work at the station. It looked to be the control panel for the gun hold under the main cargo bay. The possible stories tied with the maiming of this piece of equipment swarmed my mind, finding my own way of theorizing any number of adventurous tales.

   A few minutes go by, tweaking the damaged area as best I could to fit my hands into the circuitry. Mythroll passed by quickly, entering the open door of the munitions hold to the ladder down. I got nervous for a moment, than I heard him calling back to the mandolorian pilot, talking about molting and stellar seasons. What an odd being. Slimy thieving nerfhearder. Going back to work, not questioning the reasons tmythroll went down there. so wrapped up, figuratively and literally, in the wires of the control panel, i hadn't noticed mando sneaking past me, silent as death. I hadn't noticed him, that is, until I heard the thumping and crashing of combat and the pitiful yelps of the bounty rise to draw my attention toward the lower hold. Mythroll's shout cut short with an angry metallic hiss. The fear now taking a hold of my stomach, I pulled my hand out of the tangle to look nervously down the ladder, seeing the mando start his ascent. "carbon freezing." he said simply. I know his intention was to explain what had just happen in hopes to ease my worry, but no. it worried me more. Drawing my thought to the intense reality that I was willingly trapped on the ship of a proven dangerous bounty hunter. I felt rather idiotic in that moment, the crushing weight of the situation bringing me to a moral defeat. The mando slid by me, his body language more casual than it should have been seeing as how he had just half killed someone in the hold of his ship. He paused momentarily, looking over my work. nodding, He left in silence, returning to the cockpit.

   After a second, I gathered my thoughts and took a deep breath into my lungs. The reality of my life now was flipped upside down and tossed into a spinning vortex of crazy, but I know my strengths. I know myself and what i can handle. This? was obviously odd and scary and new, but the skills I cary can get me far. Exhaling, I focused my mind at the task at hand. Knowing my entire world was going to be changing from here on out was more calming than expected. The determination I felt towards my own new chapter of life soothed my aching back and fried nerves. This was going to be epic.

   A/N: i'm so glad to have finally finished this, holy hell ;-;    

[bd-water-purifier]

Best 8 Water filter at cheap rate

Tap water is one of those things that you never know whether or not you can trust. It's always a guessing game as to what's in the water and whether it'll be unpleasant to drink. This is why it's critical to select the best water filter price in bd and utilize it as a home water filter.

There's no need for you to sift through all of the details for hours. We've combed through the options to find the best water purifiers for you. We've whittled it down so you can figure out which water purifier is right for you.

1.Sanaky Water Filter

The sanaky Water filter System takes advantage of the unique properties of a semi-permeable membrane to allow fluid to pass through while restricting the passage of dissolved ionic materials.

Sanaky water filters work on the mechanical principle of taking dirty raw water, filtering out impurities like sediments and microbes, and then delivering clean water.

One significant difference between the two is that a purifier can remove viruses and bacteria that filters cannot. Some purifiers employ chemicals to kill or catch viruses, while others use an electrostatic charge.

2.Aqua Pro Water Filter

This Water Purifier provides clean, fresh water to your family. In any space of your home or business, the purifier can be hung on the wall or placed under the sink. It's made of high-quality material that won't leak and will endure a long time.

This Water Purifiers & Filters is happy to offer a complete variety of water purifiers and filters. Which supports modern multi-stage point-of-use reverse osmosis (RO) systems and whole-house ultraviolet sterilizer systems for residential and commercial water filtering and purification.

It's simple to maintain, user-friendly, completely assembled, factory tested, and sanitized, and it's ready to go. The whole component set for this machine is made in Taiwan.

The filter employs some of the most cutting-edge water purifying technologies available. Even dissolved pollutants are removed, and the water is protected against all forms of waterborne illnesses.

3. Heron Water Filter

Heron water filter price in Bangladesh is inexpensive since they deliver the greatest quality at a low price. Heron is a Taiwanese company that manufactures water treatment equipment and is the world's leading manufacturer.

It is well-known for its capacity to supply customers with cost-effective water solutions of any size and at any stage in the water cycle. HERON is a water and water treatment technology firm that focuses completely on water and water treatment technology.

They are continuing to add to the company's distinctive technology and scientific application skills developed over the last 15 years.

Heron works on challenges that emerge during the design, installation, and maintenance of single point-of-use purification systems, as well as large projects that require interaction with architects, consultants, and clients.

Biocide test kits, comparator tests, corrosion monitoring services, portable incubators, analysis equipment, and laboratory services; microbiology monitoring equipment, electronic meters, test strips, titration tests, and professional in-field test kits; and microbiology monitoring equipment, electronic meters, test strips, titration tests, and professional in-field test kits; and microbiology monitoring equipment, electronic meters, test strips, titration tests, and professional in-field test kits.

4.Fluxtek Water Filter

Fluxtek's core values are innovation, trust, and kindness, and it focuses on providing clean water to people as well as providing input to the earth.

What could be more valuable than being able to sip a cup of water? In some areas, individuals must go to great lengths to find safe drinking water. This issue was discovered by Fluxtek's founder, Mr. Yen-Tsun Lai, among developing country consumers. It is difficult to obtain fresh water in most parts of these countries.

Fluxtek previously partnered with a filter plant to increase the output quality. The carbon material quality of the factory. On the other hand, it did not meet the standard. Mr. Lai refused to produce filters that did not meet Fluxtek's requirements, therefore he stopped delivering filters to customers.

Fluxtek is always loving and caring for people, with the sincerity and passion of southern Taiwan, in order to provide value to their products and secure their business's long-term success. Together, they form a trusted brand that seeks to provide safe and nutritious drinking water to everyone.

5. Karofi Water Filter

Karofi is proud to be the industry leader in iRO intelligent water purifier development, manufacture, and distribution. Because of its smart features, a large number of customers trust and prefer the products.

Karofi Group Joint Stock Company of Tecomen Group develops and distributes smart water and air purifiers. “By 2040, we want to be one of the top three global corporations in residential water and air solutions,” says the company.

Its mission is to “protect and promote the health and living quality of everyone in the water and air environment on the gorgeous green planet,” according to its mission statement. It concentrates its resources on improving fundamental competencies, such as meeting global standards with Southeast Asia's most advanced manufacturing.

The QCVN6-1 National Standard for Direct Drinking Water has been met by this brand for the first and only time in the globe. They're also the first company to leverage AIoTec technology to create smarter gadgets with improved service. Making a reputation for yourself in the filtration of water and air.

6.Lan Shan Water Filter

People in Bangladesh have come to trust the LAN SHAN water filter. This company began as a professional reverse osmosis system manufacturer in Taiwan in 1993.

Reverse osmosis devices include water systems, water purifiers, water filters, water dispensers, water fountains, ionizers, water equipment, quick filter systems, bag filter systems, ionized water, hi-flow manual valves, cabinet softeners, and shower filters.

LAN SHAN Enterprise Co., Ltd. has established itself as a leading supplier in Taiwan. The merchant is based in Homei, Changhwa, and is one of the most popular sellers of the items listed.

LAN SHAN Enterprise Co., Ltd. is listed on Trade India's list of approved merchants who supply high-quality products and services, among other things.

Lan Shan has also grown to become one of the most well-known brands on the international market, thanks to a dedicated team of product developers, designers, and manufacturers.

7.Tecomen Water Filter

The Tecomen Group was founded in 2006. Water purification equipment, household appliances, healthcare equipment, and other related items are all manufactured, traded, and distributed by this company.

With well-known brands like Karofi and Korihome, Tecomen has risen to become a significant manufacturer in Vietnam.

Tecomen is a leading OEM and ODM producer for the worldwide market in Vietnam. This isn't limited to Vietnam. The Group's distribution network spans the country and comprises subsidiaries, branches, and distributors, with intentions to expand into the global market.

Tecomen has put high-quality goods on the market with a lovely design, intelligent and distinctive characteristics... With the goal of providing every family with peace of mind and comfort.

Tecomen's goal is to become a prominent manufacturer, distributor, and exporter of domestic water purifiers, electronics, and household goods in Asia.

8. City Water Purifier Water Filter

The city water purifier (CWP) is the most widely used water purification device in Bangladesh. They've been working on a complete water purification system since 2012.

CWP is a distributor of Reverse Osmosis (RO) water treatment systems and associated products for residential, commercial, and industrial applications.

This firm has constantly evolved and achieved exceptional accomplishments in the international and Bangladeshi water purifier sectors. It got to the top of the Bangladeshi corporate sector in a short period of time.

In keeping with the company's motto of "Drink Better, Live Better," has built a high-level young workforce and a thorough marketing plan.

With their outstanding management expertise, vast history, and firm market basis, they would do everything possible to become the top professional company water purifier in Bangladesh.

City Purifier has a professional employee to service market water purifiers; the teams are available between the hours of 3 a.m. to serve their clients. & 24 hours a day, 7 days a week, 365 days a year In the capital city of Dhaka, they operate two showrooms, each with a large storage facility.

These are the best 8 water filters at a cheap rate.

[thekiranblogs-blog]

Everything you should know about Electrical Engineering

Electrical engineering is an associate engineering discipline involved with the study, style, and application of kit, devices, and systems that use electricity, physics, and electromagnetism. It emerged as a recognizable associate occupation within the latter 1/2 the nineteenth century when commercialization of the electrical telegraph, the phone, and power generation, distribution, and use.

Electrical engineering is currently divided into a good vary of fields together with laptop engineering, power engineering, telecommunications, radio-frequency engineering, signal process, instrumentation, and physics. Several of those disciplines overlap with alternative engineering branches, spanning a large variety of specializations together with hardware engineering, power physics, physics and waves, microwave engineering, engineering science, chemical science, renewable energies, mechatronics, and electrical materials science. See the gloss of electrical and physics engineering.

Electrical engineers generally hold a degree in engineering science or electronic engineering. Practicing engineers could have skilled certification and be members of a knowledgeable body or a global standards organization. There are various electrical engineering jobs as well. These embody the International Electrotechnical Commission (IEC), the Institute of Electrical and physics Engineers (IEEE), and therefore, the establishment of Engineering and Technology (IET) (formerly the IEE). The IEC prepares international standards for engineering science, developed through accord, because of the work of twenty,000 electrotechnical specialists, returning from 172 countries worldwide.

Electrical engineers add an extensive selection of industries, and therefore, the skills needed area unit likewise variable. These vary from circuit theory to the management skills of a project manager. The tools and instrumentality that a personal engineer might have area unit equally variable, starting from an easy meter to a high finish analyzer to stylish style and producing computer code.

Subfields

Electrical engineering has several subdisciplines, the foremost common of that area unit listed below. Though there area unit electrical engineers WHO focus entirely on one in all these subdisciplines, several manage a mix of them. Typically bound fields, like electronic engineering and laptop engineering, area unit thought of separate disciplines in their title.

Power

Power deals with the generation, transmission, and distribution of electricity because of a variety of connected devices. These embody transformers, electrical generators, electrical motors, high voltage engineering, and power physics. In several regions of the globe, governments maintain an associate electrical network known as an influence grid that connects a spread of generators beside users of their energy. The users purchase electricity from the grid, avoiding the pricey exercise of getting to come up with their own. Power engineers may go on the look and maintenance of the facility grid still because of the power systems that connect with it. Power engineers may additionally work on systems that don't connect with the network, known as off-grid power systems, that, in some cases, area unit preferred to on-grid systems. The longer-term includes Satellite controlled power systems, with feedback in real-time to stop power surges and forestall blackouts.

Control

It focuses on the modeling of various vary of dynamic systems and, therefore, the style of controllers, which will cause these systems to behave within the desired manner.[74] To implement such controllers, electrical engineers could use electronic circuits, digital signal processors, microcontrollers, and programmable logic controllers (PLCs). Management engineering contains a wide selection of applications from the flight and propulsion systems of business airliners to the controller gift in several trendy cars.[75] It conjointly plays a vital role in industrial automation.

Control engineers usually utilize feedback once planning management systems. For instance, in an associate automobile with the controller, the vehicle's speed is unceasingly monitored and fed back to the system that adjusts the motor's power output consequently. Wherever there's regular feedback, management theory may be wont to confirm; however, the system responds to such feedback.

Electronics

Electronic engineering involves the look and testing of electronic circuits that use the properties of parts like resistors, capacitors, inductors, diodes, and transistors to attain specific practicality. The tuned circuit that permits the user of a radio to separate virtually one station is simply one example of such a course. Another instance of the analysis could be a gas signal conditioner.

Before the Second War, the topic was usually referred to as radio engineering and primarily was restricted to aspects of communications and measuring instruments, business radio, and new tv. Later, in post-war years, as shopper devices began to be developed, the sphere grew to incorporate trendy tv, audio systems, computers, and microprocessors. Within the mid-to-late Nineteen Fifties, the term radio engineering step by step gave thanks to the name electronic engineering.

Before the invention of the microcircuit in 1959,  electronic circuits were created from distinct parts that might be manipulated by humans. These discrete circuits consumed a lot of houses and power and were restricted in speed, though they're still prevalent in some applications. In contrast, integrated circuits packed an oversized number—often millions—of little electrical parts, chiefly transistors, into a bit of chip around the size of a coin. This allowed for the powerful computers and alternative electronic devices we tend to see nowadays.

Tools and Work

From the worldwide Positioning System to power generation, electrical engineers have contributed to the event of a good vary of technologies. The style, develop, test, and supervise the preparation of electrical systems and electronic devices. For instance, they'll work on the look of telecommunication systems, the operation of electrical power stations, the lighting and wiring of buildings, the look of house appliances, or the electrical management of commercial machinery.

Satellite communications is on which electrical engineers work on. Being fundamental to the discipline area unit, the sciences of physics and arithmetic as these facilitate to get each a qualitative and quantitative description of; however, such systems can work. Nowadays, most engineering work involves the utilization of computers, and it's a commonplace to use software programs once planning electrical systems. Still, the flexibility to sketch concepts continues to be valuable for quickly human activity with others.

The Shadow automaton hand system

Although most electrical engineers can perceive basic circuit theory (that is that the interactions of parts like resistors, capacitors, diodes, transistors, and inductors during a circuit), the methods utilized by engineers usually rely on the work they are doing. For instance, quantum physics associated solid-state physics may well be relevant to an engineer engaged on VLSI (the style of integrated circuits), however area unit mostly moot to engineers operating with macroscopical electrical systems. Even circuit theory is not relevant to someone planning telecommunication systems that use ready-to-wear parts. Maybe the foremost necessary technical skills for electrical engineers area unit mirrored in university programs that emphasize strong numerical skills, laptop accomplishment, and, therefore, the ability to know the technical language and ideas that relate to engineering science.

An optical master is bouncing down an associate acrylic rod illustrating the overall internal reflection of sunshine during a multi-mode optical fiber.

Electrical engineers employ a wide variety of instrumentation. For straightforward management circuits and alarms, a basic multimeter measure voltage, current, and resistance could satisfy. Wherever time-varying signals have to be compelled to be studied, the electronic equipment is additionally associate omnipresent instrument. In engineering and high-frequency telecommunications, spectrum analyzers, and network analyzers area unit used. In some disciplines, safety may be a specific concern with instrumentation. For example, medical physics designers should take into consideration that a lot of lower voltages than traditional may be dangerous once the electrodes area unit directly to bear with internal body fluids. Power transmission engineering conjointly has excellent safety issues thanks to the high voltages used; though voltmeters could, in theory, be like their low voltage equivalents, safety and standardization problems build them different. Several disciplines of engineering science use tests specific to their training. Audio physics engineers use audio to take a look at sets consisting of a symbol generator and a meter, mainly to live level; however, conjointly alternative parameters like harmonic distortion and noise. Likewise, info technology has its own take a look at sets, usually specific to specific information, and therefore the same is true of tv broadcasting.

Radome at the Misawa air station Misawa Security Operations Center, Misawa, Japan

For many engineers, technical work accounts for under a fraction of the work they are doing. Plenty of your time may additionally be spent on tasks such as discussing proposals with shoppers, getting ready budgets, and determinant project schedules. Several senior engineers manage a team of technicians or alternative engineers and for this reason project management skills area unit necessary. Most engineering comes to involve some documentation and robust communication skills area unit, thus vital.

The workplaces of engineers area unit even as varied because of the sorts of work they are doing. Electrical engineers could also be found within the pristine science lab surroundings of a fabrication plant, onboard a military ship, the offices of a house, or on the website at a mine. Throughout their operating life, electrical engineers could realize themselves oversight a good vary of people together with scientists, electricians, laptop programmers, and alternative engineers.

Electrical engineering has associated an intimate relationship with the physical sciences. For example, the man of science Lord Kelvin vies a significant role within the engineering of the primary transatlantic telegraph cable. Conversely, the engineer physicist made significant work on the arithmetic of transmission on telegraph cables.Electrical engineers area unit usually needed on primary science comes. for example, massive particle accelerators like CERN want electrical engineers to manage several aspects of the project.

[zody77-blog]

Apple Final Cut Pro and Logic Pro for iPad

Apple said today that subscription-based versions of Final Cut Pro and Logic Pro will be available for the iPad later this month. New touch interfaces from Final Cut Pro and Logic Pro for iPad let users improve their processes with the speed and simplicity of multi-touch. Video artists can now capture, edit, polish, and publish their videos all from one portable device with the help of Final Cut Pro for iPad. With a comprehensive set of high-end tools for songwriting, beat creation, recording, editing, and mixing, Logic Pro for iPad puts the power of professional music production in the hands of the creative – wherever they may be. Both Final Cut Pro and Logic Pro on the iPad will be offered with a one-month free trial for $4.99 per month or $49.99 per year, respectively. Logic Pro requires an iPad with an A12 Bionic chip or newer, whereas Final Cut Pro requires an iPad with an M1 chip or newer. Starting on Tuesday, May 23, the applications will be accessible through the App Store.

Final Cut Pro

A digital jog wheel is provided in Final Cut Pro to move clips, explore the Magnetic Timeline, and perform frame-accurate editing. With support for Apple Pencil hover to skim and preview video, users may live doodle with the Apple Pencil directly on top of video content. Using an external keyboard enables key commands. For editing with precise color reproduction on the 12.9-inch iPad Pro, Final Cut Pro for iPad also supports Reference Mode. Scene Removal Mask, Auto Crop, and Voice Isolation are examples of machine learning tools that may be used to swiftly replace or remove backdrops without the need of a green screen. Auto Crop can be used to modify video for vertical, square, and other aspect ratios. The program comes with a bank of images, sound effects, and animations, as well as HDR backdrops, moving patterns, and soundtracks that adapt to the length of videos. The pro camera mode in Final Cut Pro enables artists to manually adjust parameters like exposure, white balance, and focus, monitor audio and recording time, and capture video in either landscape or portrait orientation. The ability to move between views with a single touch is made possible by multi cam video editing, which automatically synchronizes footage for editing together. Media may be stored instantly after being imported from Files or Photos within a project in Final Cut Pro. Additionally, users may export Final Cut Pro projects developed on the iPad to the Mac using the program, which also supports importing iMovie projects.

Logic Pro

A variety of multi-touch gestures are used by Logic Pro on the iPad to navigate projects, perform software instruments, and more. The Apple Pencil makes fine changes and meticulously crafted track automation easier. Key commands are supported while using an external keyboard, much like in Final Cut Pro. Users may also record audio directly in the app by using the built-in microphones on the iPad. A complete mixer with channel strips, volume faders, pan controls, plug-ins, sends, and precise automation is available in the app. Multiple faders may be moved and mixed at once by designers using multi-touch, and they can explore a map of track levels using the mixer meter bridge. Creators may now explore all of the available instrument patches, audio patches, plug-in presets, samples, and loops in one place thanks to an entirely new sound browser with dynamic filtering. Before adding a sound to a project, users may quickly press any sound to hear it. Over 100 instruments and effect plug-ins are available in the app, which has plug-in tiles for the key controllers. Users using production tools may program rhythms and bass lines, construct unique drum kits, and slice and flip samples. Creators may swipe and pinch to rearrange and shuffle sounds with the new time and pitch-morphing plug-in Beat Breaker. While Step Sequencer enables users to create drum patterns, bass lines, and melodies as well as automate plug-ins, Quick Sampler allows users to cut and reassemble samples into new playable instruments. By adding samples and plug-ins to any drum pad, Drum Machine Designer enables the creation of unique drum kits. Users may rapidly create compositions using Live Loops. Projects may be transferred back and forth between Logic Pro for the iPad and Logic Pro for the Mac using this feature. Individual audio track stems and finished songs in a variety of lossless and compressed formats are both exportable for iPad users. In Logic Pro, creators may create a soundtrack and export it to Final Cut Pro when combining video and music. Opening GarageBand projects is supported by Logic Pro for iPad as well. Read the full article

[geotechharper]

GIM-5 Multi-channel Intelligent Resistivity & IP Meter: Redefining Subsurface Imaging Standards

Technological Paradigm Shift: From Conventional Methods to Intelligent ERT Systems

The High-Density Electrical Method, as an advanced evolution of DC Electrical Sounding, achieves 2D/3D Electrical Resistivity Imaging through intelligent electrode array networking. At its core lies Electrical Resistivity Tomography (ERT), which constructs millimeter-precision geological models by analyzing the three-dimensional distribution of subsurface electrical parameters.

Traditional single-channel systems are constrained by low data acquisition efficiency (daily coverage <0.5 km²) and limited detection depth (<500m). The GIM-5 system revolutionizes this with its 5-channel parallel acquisition architecture and patented segmented cabling technology, delivering:

400% efficiency improvement (daily coverage >5 km²)

Detection depth exceeding 1,500m

8x higher data density compared to conventional methods

Core Innovation: Engineering Implementation of Intelligent Acquisition

1. Multi-mode Electrode Management System

Featuring titanium alloy deep-water electrode arrays and bidirectional cascade controllers, the system enables:

IP68 underwater operation (100m depth endurance)

20% electrode fault tolerance

Auto grounding detection (±5Ω accuracy)

Technical Parameter Comparison:MetricConventional SystemsGIM-5Max Channels15/10 (expandable)Voltage Accuracy1%±5μV0.3%±1μVDynamic Range±24V±48VPower Output800W3,200W

2. Hybrid Array Synchronization Technology

Breaking through traditional Wenner-Schlumberger array limitations, GIM-5 pioneers the Tripole-Bipole Hybrid Mode:ρa​=K⋅IΔV​

With dynamically adjusted K-values, this innovation achieves:

30% vertical resolution enhancement (0.1m thin-layer identification)

50% lateral coverage expansion

40% reduction per measurement cycle

Full-scenario Applications: From Mineral Exploration to Urban Underground Space

1. Environmental Engineering Monitoring

In contaminant plume tracking Project, GIM-5’s 4D resistivity imaging demonstrates:

300×300m site scanning in 48 hours

Precise identification of 3 chloride sources (positioning error <2m)

Dynamic diffusion model accuracy R²=0.93

2. Urban Geological Surveys

In Metro Extension Project results using cross-hole measurement:

0.5m³ karst cavity detection at 30m borehole spacing

92% geological anomaly prediction accuracy

60% cost reduction vs traditional drilling

Intelligent Data Processing: Forward Modeling to Dynamic Inversion

1. Forward Modeling Optimization

GIM Studio software integrates FEM-BEM Coupled Algorithms, significantly accelerating modeling:

Complex geology modeling time: 6.8 minutes (vs 42 minutes conventionally)

Grid precision: 0.1m×0.1m×0.1m

2. Inversion Algorithm Advancements

ANN-TD Hybrid Inversion Architecture performance:Algorithm TypeResolution GainTime CostMemory UsageConventional LSQBaseline120min8GBNeural Network+40%25min3GBTime-Dynamic+65%18min5GB

Sustainable Engineering Solutions

GIM-5’s modular design enables full lifecycle management:

SPB900 Smart Power Unit: 850WH Li-ion battery with multi-unit series support

Segmented Cable System: 70% replacement cost reduction

OTA Wireless Updates: Firmware upgrades without factory return

Explore Revolutionary GIM Series Now

Visit Product Page Now  https://geotechcn.net/products/electrical-instrument/gim-1-single-channel-intelligent-resistivity-ip-meter%e4%b8%a8high-density-resistivity-tester/

Whether you’re engaged in environmental monitoring, mineral exploration, or urban underground space development, the GIM Series DC Electrical System delivers tailored solutions. Our product page features:

Technical comparisons of full series (GIM-1/GIM-5/GIM-10)

Latest underwater detection kit specifications

Typical engineering configuration packages

Global case study video demonstrations

[gantengpermanen]

A suitable soil environment is important for the healthy growth of plants.This means having ideal soil conditions, adequate water, sunlight and plenty of nutrients for your plants. The 3 in 1 soil tester helps to provide you with better information for growing your plants. It will help you avoid some of the common gardening mistakes such as over, or under watering, planting in an area with in area with insufficient lighting and help you monitor the acidity or alkalinity of your soil 3-IN-1 FUNCTIONS: Test the soil moisture, pH value and sunlight levels of any plant . The 3 in 1 soil meter, helps you giving you accurate information for growing your plants ACCURATE & RELIABLE: The double-needle detection technology greatly enhances the speed and accuracy of detecting and analyzing soil moisture and it's pH acidity EASY TO USE: No batteries needed, just insert the sensor probe into the soil about 5 - 10cm deep (2-4 inches) Toggle the switch to test moisture, pH or the sunlight levels you would like to measure. This soil tester can not be applied to test pH value of any other liquid. If the soil is too dry the indicator will not move. Always water the soil before testing it. INDOOR & OUTDOOR USE: Designed to be lightweight and portable, easy to carry around for outdoor use. The ideal soil test tool kit for home plants, gardens, lawns and farms. With integrated multi-function highly sensitive sensors. The 3-in-1 soil tester is able to test soil moisture, pH values and sunlight exposure levels of your plants. It can be used on plants in the garden, lawn, farm, indoors, outdoors. It's lightweight and portable, easy to be carried for outdoor use. It's the ideal plants care kit! Specifications : - pH Range: 3.5-8 Ph (3.5-6.5 ACID, 7 NOR, 7-8 ALKALI) - Moisture Range: 1-10 (1-3 DRY, 4-7 NOR, 8-10 WET) - Relative Light: 0-2000 lux (0-200 LOW, 200-500LOW+, 500-1000 NOR 1000-2000 HIGH) INSTRUCTIONS: Step 1: Switch to either the moisture/ pH/ or Light position Step 2: Stick the probe in to the soil roughly 5-10cm's deep (2-4 inches) Step 3: Adjust the position of the probe until the pointer on the dial swings slightly Step 4: After 10 minutes- note the moisture, pH or ligh level on the dial Step 5: Remove the probe from the oil and thoroughly wipe it clean after

[jalinnovation]

Blood Glucose Meters, Rapid Screen Test Kits & Health Products by Jal Innovation

Jal Innovation is a renowned name in the field of health care manufacturing that supply and exports a wide range of patented diabetics sensing devices and in vitro screening tests for home as well as professional use.  The product range is safe, dependable and affordable, and worth perusal-

Blood Glucose Meters- The blood glucose manufacturers ensure a thorough tracking of blood glucose levels with the help of advanced blood glucose meters. Continuous glucose monitoring reviews the changes and trends helping in a quicker diagnosis and preventive treatment. Thereare200, 700 Blood Glucose meters that come with techniques that provide an accurate and quick result and help understand the changes in lifestyle that may be required. Jal innovations also specialize in the OK Match 1 blood glucose meters, the OK Match 2 blood glucose meters, and the OK 1 Blood glucose meters which are exported worldwide owing to their superior functioning.

STD Rapid Screen Tests-The STD rapid screen tests as their name suggests are fast and easy to use and provide results at the point of care. They can be used to diagnose infectious diseases that are transmitted through sexual contact. These rapid tests are chosen over blood tests, due to their cultural acceptance, non-invasiveness, and high accuracy. Some of the renowned and popular tests include the iCARE HIV rapid screen tests (whole blood/serum/ plasma), the iCARE Gonorrhea Rapid Screen Test, the iCARE Syphilis Rapid Screen Test, and the iCARE HIV 1&2 Rapid Screen Test (Urine and Saliva).

Drug of Abuse Rapid Screen Tests the DOA rapid screen tests can detect an extensive range of drugs in urine and make use of the strips, cassettes, and multi-drug panels as testing equipment. There are iCARE DOA 1 Panel (Configurable) Rapid Screen Tests as well as the DOA 3 Panels rapid Screen tests, the iCARE DOA Cup Rapid Screen Tests, and the iCARE Single Cassette Rapid Screen Tests that are a popular choice amongst DOA Rapid Screen test kits. Manufacturers of DOA offer variations as client specifications and the DOA testing can be viewed without any extra apparatus.

Infectious Diseases Rapid Screen Test - The Infectious diseases rapid tests have a very less turnaround time and are a promising tool for patients. The iCARE Dengue Tri line Rapid Screen Test, the iCARE Malaria (P.f/Pan ) Rapid Screen test, the HBsAg – Hepatitis B Surface Antigen test, the multi HBV device rapid test and the like strengthen the surveillance of infectious diseases in the most accurate manner. They have also gained more acceptances, especially after the Covid 19 pandemic, and have several advantages compared to the molecular assays.

Fertility Rapid Test kits- The fertility Rapid test kits are rapid visual immunoassays for the qualitative detection of luteinizing hormone in human urine specimens. These rapid tests are testing solutions for ovulation, menopause, and pregnancy. The accuracy rates of these kits are tremendous and the fertility rapid test kit manufacturers offer these kits which can be stored in pouches even under dry conditions.

Other Rapid Screen Tests- There are a lot of options in the other Rapid tests which are the advanced ABO and RhD Blood Grouping Test kit which can determine one’s, blood group.  They use a completely new technology that can be used on fresh blood samples and has high accuracy even at room temperature. The other similar tests in this category are the iCARE ABO Blood Grouping Test card and the iCARE ABO and RhD Blood Grouping Test Card.

Health Products- Health Products aim at increasing immunity and improving the metabolism of the body. The medicinal benefits are available in an array of products like the Nutrisyz Ganoderma Lucidum Spores Powder and the Ganoderma Spore oil and the Cordyceps SP Sinensis mycelium. This mushroom-based supplement has many bioactive ingredients and can enhance the immune system, improve digestion and metabolism. Similarly, there is an Endour herbal hair tonic that improves overall hair health.