#Yanhua ACDP Module 38

[auto-tools]

Yanhua BMW BDC2 Keys Learning Bench Platform: All Keys Lost Solution

The YANHUA Mini ACDP2 with Module 38 can now fully handle BMW BDC2 All Keys Lost scenarios. This advanced solution, combined with the BDC2 Bench Test Platform and LF Smart Key Antenna + Remote Control Receiver, streamlines key programming for BMW vehicles without requiring module reinstallation in the car.

Why choose the BMW BDC2 Platform? The YANHUA BMW BDC2 Keys Learning Bench Platform is a game-changer for automotive locksmiths and technicians. It simplifies key programming by allowing off-car operations, saving time and effort.

Key Features 1. It contains the BMW BDC2, and all keys have lost authorization (used with module 38).

2. Enables bench learning of BDC2 keys without reinstalling the module in the vehicle.

3. Test the key emergency function to verify ignition capability and successful key learning.

4. Supports connection of smart antennas and a remote control receiver for testing: 1) Key remote control functions; 2) Keyless entry systems.

5. Compatible with BDC2 instrument and DME module connections.

This platform is ideal for professionals seeking efficiency, accuracy, and versatility in BMW key programming.

Frequently Asked Questions (FAQs) Q1: Can YANHUA ACDP2 perform All Keys Lost on BMW BDC2? A: Yes! The YANHUA Mini ACDP2 + Module 38, combined with the BDC2 Bench Platform, fully supports All Keys Lost programming.

Q2: Is the BDC2 Bench Platform compatible with other devices? A: Yes, it can connect to any device that supports this function.

Q3: How do I read the ISN (Immobilizer Security Number)? A: You’ll need the Module 3 + B48 Bench Interface Board to read the ISN.

Q4: What if the DME module is locked? A: The DME module is not locked in general.

Q5: If I have my bench or do this job on the car, do I need this platform? A: For BMW BDC2 all keys lost, it needs Module 38 and the platform together.

Q6: What's the BDC2 Keys Learning Bench Platform authorization? A: It's A504 allows to do BMW BDC2 all keys lost.

ACDP Configuration List (BMW BDC2 Keys Learning Bench Platform)

Enhance your workflow, save time, and deliver professional results with this must-have BMW key programming solution!

Contact Us Email: Sales@OBD2shop.co.uk Whatsapp/Wechat: +86 13983755934 Visit: www.obd2shop.co.uk

[eobdtooluk-blog]

Yanhua ACDP Module 38 Adds BMW BDC2 Module Erase and Replace Functions

Yanhua Tech has released a new free update for the Yanhua ACDP Module 38.In addition to adding keys to BMW BDC2 modules, the update now supports BDC2 module reflash, copy, and replacement functions.

[auto-tools]

ACDP Module38 BDC2-ICP Interface Board Installation and Disassembly

This guide provides step-by-step instructions for installing and disassembling the Yanhua Mini ACDP Module 38 BDC2-ICP interface board.

Installation of the BDC2-ICP Interface Board

1. Unlock the Interface Board Push the lock on the interface board to the "Unlock" position.

2. Position the Interface Board Based on the location column of the interface board, determine its corresponding installation area on the BDC2 module.

Align the Board Align the location column of the interface board with the positioning holes on the BDC2 module.

Secure the Interface Board Press the interface board downward firmly. Slide the PCB lock buckle to the "Lock" position to secure the board.

Disassembly of the BDC2-ICP Interface Board 1. Unlock the Board Slide the PCB lock buckle to the "Unlock" position to release the locked state.

2. Remove the Interface Board Place your hand in the CON area and apply an even upward force to remove the interface board.

Follow the steps carefully to avoid damage to the board or module. For more details, please refer to the video:

www.obd2shop.co.uk

[eobdtooluk-blog]

How to Program BMW G Chassis BDC2 Key by Yanhua ACDP and Module 38?

How to use Yanhua Mini ACDP/ACDP-2 and Module 38 to add new key to BMW G Chassis BDC2 module on bench? Check the step-by-step guide below.

[eobdtooluk-blog]

Yanhua BMW BDC2 Keys Learning Bench Platform Program BMW G Series BDC2 AKL FAQ

Yanhua Mini ACDP/ACDP2 with Module 38 can program BMW BDC2 all keys lost on bench. The

BMW BDC2 Keys Learning Bench Platform is required to work with. Here have collected some frequently asked questions for reference.

Q1: Yanhua ACDP2 support BMW BDC2 All Keys Lost now? Is it true?

A: Yes! It needs Module 38 + BDC2 Keys Learning Bench Platform.

Yanhua Module 3 + B48 Interface Board are also required for DME B48 EEPROM data backup.

Q2: Can the BDC2 Bench Platformwork with other devicesexcept the ACDP host?

A: Yes, it is compatible with other tools that support BDC2 all keys lost.

Q3: How to read a locked ECU?

A: The DME module is not locked, so no special steps are needed.

Q4: Is reading ISN required?

A: No, but you must back up the engine EEPROM data (Step 1) using Yanhua Module 3 and B48 Interface Board. This data is used for Step 6 (Write DME ISN) and Step 7 (Reset EGS EWS).

Q5: Can't read with another device? Is it necessary to have all the adapters for each version of the BMW engine to make the first step (backup coding data)?  

A: Use Yanhua Module 3 and B48 interface board to read the EEPROM data of DME B48 SPC5777. You also can use other available devices to read the data.

Q6: Do I need extra modules to do Step 7 (Reset EGS EWS)?

A: Only require the Yanhua BMW BDC2 Keys Learning Bench Platform. Then reinstall BDC2 in the car and reflash via OBD after programming.

Q7: Does it also require parts from a donor vehicle the front left and right antennas? What can the antenna do? Is it necessary?

A: No.

The LF Smart Key Antenna & Remote Control Receiver are used for key functionality (intelligence & remote control) testing.

If you don’t have them, just reinstall BDC2 in the vehicle for testing.

To be continued…

Learn more:

[eobdtooluk-blog]

Yanhua ACDP2 with BMW BDC2 Keys Learning Bench Platform Support BMW G Chassis BDC2 AKL

Is it possible to use Yanhua ACDP/ACDP2 to do all keys lost for BMW G Chassis BDC2 module?

The answer is YES.

Yanhua Mini ACDP now can support BMW BDC2 all keys lost programming.

It requires Yanhua Module 38, BMW BDC2 Keys Learning Bench Platform, and LF Smart Key Antenna + Remote Control Receiver to work with ACDP device.

Yanhua BMW BDC2 Keys Learning Bench PlatformFunctions:

1.Contains the BMW BDC2 all keys lost authorization

(used with module 38).

2.Key learning on Bench:

Can learn BDC2 keys on the bench without reassembling the BDC2 module back into the car

3.Emergency function test:

Can test the key emergency function to confirm if the key can turn on ignition and verify successful learning

4.Smart antenna & remote control support:

Supports connecting Smart Antennas and Remote Control Receivers to test key remote control and keyless entry functions.

5.Module compatibility:

Supports connecting the BDC2 instrument and DME module

Highlights:

Compatible with any device that supports the BDC2 module.

The interface board replaces manual wiring, which is safe, convenient, simple and efficient.

Menu function path:

BMW-> FEM/BDC-> IMMO/Mileage-> BDC2 ICP+ OBD (F/G Chassis)-> Add Key (All key lost)

Step 1: Backup coding data

Use Yanhua Module 3 and B48 Interface Boardto backup the engine EEPROM data

Step 2: Backup FAFP data

Step 3: Write IMMO data

Step 4: Write coding data

Step 5: Made dealer key

After making the dealer key, turn on the ignition to do key match

Step 6: Write DME ISN

Verify the key can start the car normally, then go to next step

Step 7: Reset EGS EWS

Turn on the ignition, but not start the car

After completing all the above steps, start the car, the key and the vehicle will be normal.

[eobdtooluk-blog]

How to Install and Disassemble Yanhua Module 38 BMW BDC2-ICP Interface Board?

Yanhua Module 38 is fully compatible with both Mini ACDP-1 and ACDP-2 for adding keys to the BMW G-chassis BDC2 module on the bench. No soldering required. No need to buy specific key. Check the guide below to install and disassemble the BDC2-ICP interface board for BMW G series BDC2 module.

Part 1: Install BDC2-ICP Interface Board

1.First, push the lock of the interface board to the “Unlock” position.

Then based on the location column of the interface board.

Determine the interface board’s installation area on the BDC2 module.

2.Align the location column of the interface board with the positioning holes of the BDC2 module.

3.Press the interface board downward.

Slide the PCB lock buckle toward the Lock position to secure the interface board.

Part 2: Disassemble Yanhua BDC2-ICP interface board

1.Slide the interface board lock buckle to the Unlock position.

Release the locked start of the interface board

2.Place your hand in the CON area.

Apply upward force evenly, and remove the interface board.