#openflexuremicroscope

[de3dprintman]

The first 3D printed parts for the OpenFlexure Microscope project are finished and look very good. The parts are printed without any support on the Original Prusa i3 MK3S with MMU2S by @josefprusa in the stunning @prusament PLA Mystic Brown and Pearl Mouse in 0.2mm layers. https://openflexure.org/projects/microscope/ #3dprinting #3dprintingindustry #3dp #openflexure #openflexuremicroscope #opensource #opensourcehardware #prusa3d #prusaresearch #prusaprinters #prusament #pla #filaments #raspberrypi #microscope #microscopy #maker #makersgonnamake #diy #laboratory #de3dprintman https://www.instagram.com/p/CAxE1VgjY0n/?igshid=4vj3woom9rbm

[de3dprintman]

I need some O-rings for my OpenFlexure microscope project but they never arrived in the mail and they are nowhere to find anywhere near here so I made some in @adskfusion360 and printing them in 50 microns on my Original Prusa SL1 by @josefprusa in @liqcreate_3dprinting Flexible-X. #3dprinting #3dprintingcommunity #3dp #3dprinter #3dmodel #prusa #prusa3d #prusasl1 #liqcreate3d #flexible-x #resin #fusion360 #openflexuremicroscope #microscope #additive #am #additivemanufacturing #maker #makermovement #de3dprintman https://www.instagram.com/p/CEwoLncjFlL/?igshid=5oqp20yoclei

[de3dprintman]

My wife Erica is having fun with my new OpenFlexure microscope. She works in Archeology so this might be a nice new tool for her. The lab version of the microscope uses a @raspberrypi, Pi Cam v2, a lens, PLAN objective. The hardest part to find is the 50/50 defuser which can cost a couple hundred bucks if your lucky. #3dprinting #3dprintingcommunity #3dp #raspberrypi #raspberrypifoundation #rpi #openflexure #openflexuremicroscope #microscope #microscopy #lens #objective #opensource #opensourcehardware #prusa3d #prusament #de3dprintman https://www.instagram.com/p/CEKL-2Wj2ZT/?igshid=1bby7izs49eyp

[de3dprintman]

The OpenFlexure project makes microscopy available for everyone and today I started building one of the lab grade versions. The OpenFlexure Microscope is a customisable, open-source optical microscope, using either very cheap webcam optics or lab quality, RMS threaded microscope objectives. It uses an inverted geometry, and has a high quality mechanical stage which can be motorised using low cost geared stepper motors. The printed parts are printed in @prusament PLA Pearl Mouse and Mystic Brown on the Original Prusa i3 MK3S by @josefprusa. The @raspberrypi 3B, Pi Cam v2, objectives, lenses, bolts and nuts, and other things needed cost over 300 euro. The normal version can be build for 50 euro or less. #3dprinting #3dprintingcommunity #3dp #3ddrucker #3ddruck #3d #prusa3d #prusai3mk3s #prusament #openflexure #openflexuremicroscope #microscope #microscopy #opensourcehardware #opensource #makermovement #laboratory #labgrade #industrial #de3dprintman https://www.instagram.com/p/CD6msDajuuy/?igshid=wp00g76cklyh