weijiang-automation

[weijiang-automation]

How to choose an automatic immersion tin machine?

First of all, there are many types and specifications of automatic immersion tin machine. According to the function, automatic immersion tin machine can be divided into: automatic double-head immersion tin machine, single-head twisted wire end immersion tin machine, and automatic parallel wire end immersion tin machine. , Fully automatic heading and end dipping and stranding machine. The equipment can be customized for you according to customer needs. If there are special needs, multiple lines can be processed at the same time, and components such as wire feeding device, wire twisting device, tin furnace and other components can be added.

Automatic double-head immersion tin machine can be selected as required:

1. Fully automatic double-head immersion tin machine: It can realize the functions of cutting both ends of the wire, single-ended stripping, double-ended stripping, double-ended half stripping, double-ended twisting, and double-ended immersion tin.

2. Single-head twisted wire end immersion tin machine: It can realize the functions of terminal on one end of the wire and twisting, stripping, and immersion tin on the other end.

3. Fully automatic parallel wire end immersion tin machine: designed for single-end stripping and dipping, the other end can be used for stripping, stripping, and dipping. Stripping, half stripping and immersion tin function, each function is fully computerized and digitally operated, and the replacement of wires only needs to replace the wire splitting mold accessories and terminal mold accessories and terminal mold accessories.

4. Fully automatic heading and end immersion tinning and stranding machine: For equipment with stranded wire requirements, it can realize the integration of wire cutting, finishing, and immersion tinning and stranding to improve production efficiency.

The automatic tin immersion machine is selected according to its characteristics:

1. The automatic tin immersion machine replaces manpower and saves costs. Increase productivity

2. The automatic immersion tin machine cuts off the wire, strips, and immerses the tin. The relevant time actions will be automatically adjusted;

3. The production wire range of the automatic tin immersion machine can range from AWG18 to AWG34, which is extremely wide-ranging and practical;

4. The twisting method adopts the clamping method of two twisting knives, which can adjust the clamping half of the rubber to change the tightness of the twisting, so that the twisting is straight and beautiful;

5. The immersion tin angle of the automatic immersion tin machine is close to 90 degrees, so that the wire diameter immersion tin degree is average (the point depth is accurate);

6. The automatic immersion tin machine adjusts the lifting height of the small tin cup with the rapid fine-tuning knob rotation to make the dip depth more accurate;

7. Designed to have the wire feeding barrel before moving forward, the wire feeding function is available, and the wire feeding is stable

8. The clamping position of the automatic immersion tin machine and the immersion tin end point can be adjusted to about 10mm

9. The immersion tin end of the control wire is not easy to bend, and the spotting position is more accurate.

10. Equipped with an automatic smoking device and a lead-free tin stove, meeting high environmental protection standards (the tin stove heating device uses durable heating sheets instead of traditional heating wires);

11. There is an automatic tin scraping device to make the cut wire bright and free of tin residue;

The working environment of the automatic tin immersion machine has high requirements, and the room needs to be kept clean and dry. Placed in a horizontal place, it must have good stability. During processing, there will be slight vibrations in the fully automatic immersion tin machine. At this time, you should pay attention to safe operation, keep a proper distance between the staff and the machine, and pay attention to rest in the middle, so that the machine has a process of adapting.

Kunshan Weijiang Automation Equipment Co., Ltd. is a modern technology enterprise specializing in the processing, cutting, research and development of wire harness equipment. It has a strong technical research and development force, a strong after-sales service team and precision processing equipment. Our machines are exported to more than 20 countries. If you are purchasing an automatic immersion tin machine, I believe weijion will be your good choice.

Recommended reading:

Application of wire stripping machine

Features of wire stripping machine products

Technical inspection of automatic terminal machine

[weijiang-automation]

Precautions for operating the fully automatic immersion tin machine

Even with automatic tin immersion machines, safety accidents may occur during use. In fact, most of these accidents are caused by human factors. As the basis of enterprise production, safety must be ensured, and at the same time, efforts must be made to reduce the operational risks of automatic immersion tin machines.

First of all, it is necessary to strengthen the safety awareness and operation mode training of the operators; although the automatic immersion tin machine automatically completes the production of the terminal, the installation of the knife and other links still needs to be completed manually, and must be carried out by professionals after the installation, and testing must also be carried out .

In order to improve the safety of the automatic immersion tin machine, it is necessary to ensure that the power supply is disconnected when the processing wiring harness is replaced, and the power supply cannot be replaced while the machine is running. This is a very irresponsible performance. After the automatic immersion tin machine is produced, the surrounding environment and the cleaning and trimming of the equipment itself cannot be ignored, so as to avoid safety accidents caused by residual materials at the edges and corners, thereby improving the safety of the automatic immersion tin machine.

Common faults and solutions of immersion tin machine

The automatic immersion tin machine is an indispensable special equipment for the production and processing of various cables and wires. It is a professional and intelligent high-end technology enterprise product separated from the laser cutting multi-function machine. It is basically not manual operation in actual operation. , But also malfunctions. Haisheng introduces you to several common faults and solutions of immersion tin machine.

The cutting length of the electronic wire of the automatic immersion tin machine is different

1. The wire drive wheel is too tight or too loose. If this phenomenon causes problems, we only need to use the rolling line to rotate to adjust the gap between the two wheels, so that the cable is not flattened, too loose and cannot fall off. This mechanical failure can be completely resolved;

2. The straightening device is too tight or too loose. If due to this problem, our correct handling should be based on the basic principle of being able to play the role of the straightening device and successfully complete the delivery, in order to completely solve it;

3. Cutting edge damage or edge, in this case, we only need to remove and replace with a new tool.

Machines and equipment cannot run or stop in rotation

First check whether there is current input, and then check whether the total number of settings is reached, whether the wire or an operating part is stuck, and then check whether the automatic immersion tin machine has a signal connection or a power connection, so that the immersion tin machine does not press down.

The points for attention when operating the automatic immersion tin machine equipment and the solutions to common faults are the above. I hope to help you. If you have more questions about the automatic immersion tin machine, please consult us.

Kunshan Weijiang Automation Equipment Co., Ltd. is a modern technology enterprise specializing in the processing, cutting, research and development of wire harness equipment. It has a strong technical research and development force, a strong after-sales service team and precision processing equipment. Our machines are exported to more than 20 countries. If you are purchasing an automatic immersion tin machine, I believe weijion will be your good choice.

Recommended reading:

How to choose an automatic immersion tin machine?

Correct use method of automatic terminal machine

Common fault treatment of coax

[weijiang-automation]

Simple overview of automatic pipe cutting machine

The principle of the automatic pipe cutting machine is to cooperate with each other through the air-push-oil type. The electric system controls the movement direction of the pneumatic system and pushes the oil circuit to make a straight reciprocating movement. In the reciprocating movement, the signal detected from the carriage limit is used as the basis , Control and change the gas and oil circuit movement, so as to achieve the expected path of the knife.

Advantages and innovations of automatic pipe cutting machine:

1. Greatly improve and ease installation safety and fire safety;

2. Precision cutting, both sides of the pipe are flat after cutting, which is convenient for connection

3. The cutting method is simple and fast, saving a lot of working time;

4. Provide a light work method, you can design a cutting plan according to the workplace (on-site);

5. High safety, no need to move the pipe by hand when working;

6. When cutting, it will not produce sparks and dust to the outside world;

7. Full-featured, it can cut various built pipelines of the power system;

8. Cutting pipe material corrugated pipe, pvc pipe can be cut;

9. There are no specific requirements for pipe diameter and working platform;

10. Good quality and low price, high cost performance.

Operating procedures of automatic pipe cutting machine:

1. Check before starting:

1.1 Check whether the saw blade is in good condition, and replace it if there are cuts or cracks.

1.2 According to the specifications of the high pressure hose, replace the corresponding positioning pin and guide sleeve.

2. Operation steps:

2.1 Turn on the power supply and start the motor.

2.2 Pass the cut high-pressure hose into the replaced guide sleeve, pull the knife-shaped handle to drive the hose into the saw blade, the hose is cut, and when the slide plate is reset, it will be pulled back to its original position by two tension springs.

2.3 Insert the inner hole of the cut rubber tube into the positioning pin shaft. When the saw blade rotates, make a slit at the place where the rubber is to be stripped to ensure a good glue breaking effect when the rubber tube is stripped.

2.4 After working, the power supply must be cut off.

Main features of automatic pipe cutting machine:

1. Good energy-saving effect. Using the cutter to rotate, the pipe does not move, saving the power required for pipe rotation.

2. High efficiency and low operating cost. It adopts the cutting method of multi-tools processing at the same time, which has high processing efficiency and low tool consumption.

3. High processing precision and low noise.

4. High reliability, good accuracy maintainability and convenient maintenance.

5. The control system adopts a motion control platform based on industrial Ethernet, with a high degree of automation and strong control function, which fully realizes the production automation of tube cutting processing.

Kunshan Weijiang Automation Equipment Co., Ltd. is a modern technology enterprise specializing in the processing, cutting, research and development of wire harness equipment. It has a strong technical research and development force, a strong after-sales service team and precision processing equipment. Our machines are exported to more than 20 countries. If you are purchasing an automatic pipe cutting machine, I believe weijion will be your good choice.

Recommended reading:

Correct use method of automatic terminal machine

What should I do if the automatic terminal machine overheats?

Insulated terminal crimping machine

[weijiang-automation]

How to choose a fully automatic pipe cutting machine

How to choose a fully automatic pipe cutting machine is one of the more headaches for every salesperson who is new to this industry. After all, a good pipe cutting machine not only involves the cost of the company's products, but also affects the efficiency of the operation. Therefore, choosing a good pipe cutting machine is the common goal of every manager. The company draws on the practical experience of the guests and gives the following suggestions:

The size of the data that can be processed is different; different data depends on the material to be cut, the shape (round tube, square tube, bar, or special shape), the size and thickness of the data, straight cut or bevel cut 45 degrees Choose models of different sizes. Different types of pipe cutting machines. The power of the pipe cutting machine required is different; with a pipe cutting machine, the size of the material cut by 45 degrees is often smaller than that for 90 degrees.

Requirement on length accuracy, for example. Requirements for cutting surface burrs, etc.

Let me tell you about the precautions during the use of the corrugated pipe cutting machine:

1. Use a stable power supply while ensuring reliable grounding of the equipment shell to prevent damage to people caused by machine leakage. If the voltage is unstable, in order to make the equipment operate normally, the user must be equipped with a voltage regulator.

2. During the working process of the equipment, do not allow children or other non-operating personnel to approach it to avoid injury.

3. Lubricate and protect the transmission mechanism of the machine regularly. When the temperature is low, use antifreeze oil. There are two small holes on the outer cover of the knife holder, which are lubrication holes.

4. The working environment of the equipment should be kept clean, free of dust, corrosive chemicals, and strong electromagnetic interference. Do not use the equipment in extremely cold and extremely hot environments, and maintain good ventilation.

The above are the precautions for the use of the corrugated pipe cutting machine. I hope it will be helpful to you. If you are purchasing corrugated pipe cutting machine equipment, welcome to choose Weijion.

Kunshan Weijiang Automation Equipment Co., Ltd. is a modern technology enterprise specializing in the processing, cutting, research and development of wire harness equipment. It has a strong technical research and development force, a strong after-sales service team and precision processing equipment. Our machines are exported to more than 20 countries.

Recommended reading:

Simple overview of automatic pipe cutting machine

Replacement of automatic wire stripping machine

How to judge the quality of the terminal crimping machine

[weijiang-automation]

Improper selection of wires and cables in the industry has potential accidents

Wire and cable users often use our wire stripping machines and terminal machines, so we can often see that some users are greedy for cheap products and improper selection, which is the main cause of electricity accidents and waste.

Coveting low prices of wires and cables is a common misunderstanding of a considerable number of users and even some companies using wires and cables. In order to save money and neglect safety, some users select low-quality wires and cables with low prices, no guarantee of quality, and high potential for accidents.

We know that due to the safety of wires and cables and other factors, the prices of wires and cables cannot meet the requirements of some users. However, some self-employed private enterprises are unable to manufacture wires and cables that meet the requirements of national standards in terms of material selection, production technology, and testing methods, and their safety will not be guaranteed. In addition, they are making fuss about short meters and a few meters at their low prices. Flood the market and cater to some users.

Some users have insufficient understanding of their own electrical requirements and environmental conditions, and have insufficient understanding of the use range, requirements, and performance of wire and cable models, and often choose the wrong model.

For example, a slag truck in front of the furnace of a steelmaking plant is powered by a motor, and the temperature in front of the furnace is as high as 800℃～900℃. Under such environmental conditions, because the factory has no special requirements for wires and cables. As we know, the general-purpose rubber-sheathed flexible cable is used to charge the YC type. As a result, the use time is short and the sheath is scorched. After consultation, the use of fire-resistant and flame-retardant cables reduced the pain and economic loss of cable replacement and ensured the normal production of the enterprise.

Some important departments, high-rise buildings, computing centers, chemicals, public entertainment venues, and places where people are concentrated must use flame-retardant or fire-resistant cables with fire-fighting functions; the Ministry of Coal stipulates that cables used in deep coal mines must be flame-retardant; There are also special performance requirements such as elevator cables, electric welding machine cables, and motor lead wires.

In actual use of these special wires and cables with special requirements, some companies, especially individual companies, often don’t know enough about them and refuse to use them; some companies ignore the Ministry of Coal’s requirements that cables used in deep coal mines must have flame retardancy. Instead, purchase general-purpose rubber-sheathed flexible cables; in some karaoke halls and places where people are concentrated, some general wires and cables that do not have fire-fighting functions are installed, causing great potential accidents.

If you are interested or have questions about wire harness processing equipment, please consult us.

Kunshan Weijiang Automation Equipment Co., Ltd. is a modern technology enterprise specializing in the processing, cutting, research and development of wire harness equipment. It has a strong technical research and development force, a strong after-sales service team and precision processing equipment. Our machines are exported to more than 20 countries.

[weijiang-automation]

About handheld tape winding machine

Hand-held tape winding machine means that during the operation of the tape winding machine, manual hands are required to hold both ends of the wire harness to make a forward movement of the wire harness. The hand-held tape winding machine mainly includes the weijion hand-held tape winding machine, which solves the problem of difficult winding of the wire harness and time-consuming labor for the complex wire harness industry, and greatly improves the efficiency.

The handheld tape winding machine can also be called the hand-held wire harness winding machine. It is an automated equipment used on the assembly line of the wire harness factory. Compared with the manual binding and winding wire harness products, it has the advantages of high efficiency and uniform winding. Compared with the desktop tape winding The hand-held belt winding machine has the advantages of small size, light weight, flexible use, high efficiency, and can be suitable for working in any environment.

handheld tape winding machine operation

1. Insert the tape into the tape holder

2. Press the "ON/OFF" switch to "ON"

3. Press the AUTO/MANU button to select the operation mode

4. Specify the speed

5. The speed must be specified during AUTO operation

handheld tape winding machine performance

1. The winding speed of the tape winding machine is adjustable

2. The number of winding turns of the tape winding machine can be set at will

3. With infrared anti-cutting function to improve the safety of workers

Support wire harness continuity and point tape. Using this handheld device, the wire harness can be wrapped with various tapes with high quality.

Parameters of weijion handheld tape winding machine:

Power specification: 110/220VAC, 50/60Hz

Tape width: 10-25mm

Outer diameter of tape roll: maximum Φ90mm / maximum Φ110mm

Packing speed: manual control

Weight: 4 kg

Features of Handheld Winding Machine:

1. It can be matched with a variety of material tapes.

2. On the support frame, with this hand-held device, various tapes can be used to wind the wire harness with high quality. Its effect is equivalent to other devices. It is sturdy, light, easy to operate and not easy to get tired.

3. The operation is simple and ergonomic, and the operator only needs simple exercises. This device has high efficiency because it is convenient to move.

4. Easily adjust the distance and overlap of the tape to reduce waste.

5. After cutting the tape, the tool automatically jumps to the next position for the next preparation without additional procedures. Branches can be skipped. If required, it can be fixed with numbered tape before or after the branch node.

6. The tape roll can be adjusted to the required direction, and the surface of the tape is guaranteed to be of the best quality: proper tension and no wrinkles.

Kunshan Weijiang Automation Equipment Co., Ltd. is a modern technology enterprise specializing in the processing, cutting, research and development of wire harness equipment. It has a strong technical research and development force, a strong after-sales service team and precision processing equipment. Our machines are exported to more than 20 countries.

Weijion is a professional manufacturer of hand-held tape winding machines, specializing in the production of tape winding machine equipment to meet your various winding needs. If you are purchasing wire harness tape winding machine equipment, I believe weijion is a very good choice.

Related Reading:

Obvious advantages of multifunctional computer wire stripping machine

Features of wire stripping machine products

How to effectively reduce the danger of operating the terminal machine?

[weijiang-automation]

What are the factors that affect the quality of the automatic terminal machine

Specialized equipment is extremely common today, and high-tech is developing, and the equipment can achieve its goals quickly with higher efficiency. The use of mechanical equipment allows us to provide a lot of convenience and efficiency. If the equipment has common faults, it cannot be used normally. In the wire harness processing and manufacturing industry, the automatic terminal machine is the most commonly used mechanical equipment.

The pros and cons of a piece of equipment will jeopardize the company's production efficiency, and the probability of common failures of good-quality equipment will be low. Every kind of mechanical equipment has a quality appraisal method. In order to evaluate its quality, the most common thing is whether the characteristics are stable, whether there are common faults in the whole process of application, whether the actual operation is safe, etc. aspect. The automatic terminal machine is also a mechanical device, and it is fully automatic.

Quality is related to the high efficiency and actual effect of cable production and processing, and each one is also expected to be a high-quality automatic terminal machine that can be purchased. Weijion specializes in the production of wire harness processing equipment, the quality is guaranteed, and it can definitely be used for a long time with peace of mind. Of course, everyone should also want to understand the quality of the automatic terminal machine and the harm caused by these elements.

Production raw materials: The raw materials for the production of mechanical equipment have a great harm to the final quality of the products, especially in the extreme conditions of the office environment, the main performance is particularly significant, so as to ensure the wear resistance and corrosion resistance of the automatic terminal machine. resistance, impact resistance work ability. It is necessary to select hard and solid metal composite materials with strong corrosion resistance and high compressive strength. Weijion's raw materials are all metal composite materials suitable for terminal machines, and the equipment is all high-quality equipment.

Production process: The quality of the automatic terminal machine will suffer from the harm of raw materials, and the cost-effectiveness will be harmed by the production process. Sometimes even if the best raw materials on the market are used, if the manufacturer does not master the key production process and the processing technology is not perfect, the fully automatic terminal machine produced will also have many shortcomings. Here A little weijion can ensure that it is carefully making the automatic terminal machine and grasps the key process of the automatic terminal machine. No matter what kind of harm it is, it will have a great impact on the quality of the automatic terminal machine. Therefore, manufacturers must attach great importance to the production of raw materials and the improvement of production processes.

Kunshan Weijiang Automation Equipment Co., Ltd. is a modern technology enterprise specializing in the processing, cutting and research and development of wire harness equipment. We have strong technical research and development strength, strong after-sales service team and sophisticated processing equipment. Our machines are exported to more than 20 countries. If you are purchasing automatic terminal machine equipment, I believe Weijion will be your best choice. Welcome to contact us.

[weijiang-automation]

What kind of terminal is the automatic terminal machine suitable for?

The automatic terminal machine is mainly used for wire harness professional processing equipment such as wire cutting, double-end stripping, and single-end crimping. Simple operation, stable performance and labor saving. The line length and the length of the stripping head are directly set by the touch screen menu panel, which is characterized by fast adjustment of base performance, short adjustment time, and simple and convenient operation.

The high degree of automation of mechanical equipment enables enterprises to reduce the number of employees; the design adopts modularization, and the adjustment of the machine becomes simple; the use of standard accessories reduces the maintenance cost; the use of high-end electrical control, independent development of programs, and easy operation of the human-machine interface.

The life of the terminal industry lies in the rapid development of the connector industry. The development of the terminal industry mainly depends on the economic development of a country and region, the government's attention and its own necessary terminal potential resource library. The development of the terminal industry is different in different regions. Europe, North America and parts of East Asia developed earlier. They mainly transitioned in the second industrial revolution, especially the United States and Japan. The rapid development in the three industrial revolutions has promoted the leap of the connector industry. For parts of East Asia, Africa and South America, the development of the connector industry is relatively slow, mainly because these regions have not completed the transformation of their own industries in the frenzy of the industrial revolution.

The continuous terminal uses the existing track-type continuous terminal connection technology, and adds a circuit composed of electronic components to realize the transmission coupling of the photoelectric process. The automatic terminal machine uses continuous terminals. It is used to facilitate the connection of wires. It is actually a piece of metal sealed in insulating plastic. There are holes at both ends to insert wires. There are screws for fastening or Loosen, such as two wires, sometimes need to be connected and sometimes need to be disconnected, then they can be connected with terminals and disconnected at any time without having to solder or twist them together, which is very convenient and fast. And it is suitable for a large number of wire interconnections. In the power industry, there are special terminal blocks and terminal boxes, all of which are terminal blocks, single-layer, double-layer, current, voltage, common, breakable, etc. A certain crimping area is to ensure reliable contact and to ensure that enough current can pass.

Kunshan Weijiang Automation Equipment Co., Ltd. is a modern technology enterprise specializing in the processing, cutting and research and development of wire harness equipment. We have strong technical research and development strength, strong after-sales service team and sophisticated processing equipment. Our machines are exported to more than 20 countries. If you are purchasing automatic terminal machine equipment, I believe Weijion will be your best choice. Welcome to contact us.、

Related Reading:

Wiring problem of automatic terminal machine

How to choose automatic terminal machine equipment?

About handheld tape winding machine

[weijiang-automation]

What is the working principle of the automatic terminal crimping machine?

There are many people who don’t know the wire harness processing industry and don’t know what the automatic terminal crimping machine is used for. Let me briefly introduce you to the following:

Automatic terminal machine is also called automatic terminal crimping machine

Definition: Crimping is a method of connecting wires and terminals in the cable assembly process. By applying a certain mechanical external force (refers to stripping the insulator of the wire, crimping the terminal to bite on the conductor), the two materials are tightly joined , So as to achieve the purpose of electrical conduction or firm connection. Therefore, precise crimping tools can ensure good crimping quality. At present, there are three types of crimping tools: hand tools, semi-automatic crimping equipment, and fully automatic crimping equipment.

Function: A good crimping terminal can reduce resistance, reduce copper wire oxidation at crimping, and have various excellent properties such as firm tightness and good electrical conductivity.

Firm tightness explanation: It will not be pulled loose or disconnected within a certain range after the tensile test.

Precautions for crimping:

1. Whether there is any problem with the installation and debugging of the equipment, which directly affects the quality of terminal crimping. (For example: is there any looseness in the mold, whether the terminals are in place, whether there are impurities in the mold, etc.)

2. The placement of employee gestures, incorrect gestures will cause a variety of defective products.

What is the working principle of the terminal machine?

1. The principle of stepping motor: the motor is constantly rotating.

There is a breaker with a clutch inside, and every time it is moved, a "0" marked in advance will go out, which is common.

2. In the past five years, there has been a silent terminal machine with a servo drive, and its operating principle is different from the above;

Only one message is given to the servo drive, and this message is sent to the motor to form a posture.

What is an automatic terminal machine:

The automatic type means that if the cable is put on, the terminal grinding tool on the shelf, and the main parameters are set in the interface, it can be manufactured.

Terminal machines can be classified as pneumatic terminal machines, terminal machines, ultra-quiet terminal machines, all-round terminal machines, continuous terminal cutting PIN machines;

Wire stripping machine, automatic ultra-quiet terminal machine, wire cutting and stripping machine, wiring terminal machine, stripping machine, small diamond terminal machine, series motor stator terminal machine;

Computer power cord automatic peeling and finishing machine, pin insertion machine terminal machine, gold wire terminal machine, terminal crimping machine, etc.

Weijion is a professional wire processing equipment manufacturer, producing all kinds of wire stripping machines and terminal machines. If you are purchasing automatic terminal crimping machines, welcome to contact us, I believe weijion will be your best choice.

Recommended reading:

How to deal with the bad terminal fixing of the terminal crimping machine

Problems that cannot be ignored when choosing a terminal crimping machine

Reasons for abnormal shutdown of automatic terminal machine

[weijiang-automation]

How to choose automatic wire bending machine equipment?

What is CNC wire forming?

The process refers to forming or bending a length of wire from a wound coil or length.

Manipulate the wire until it reaches the desired shape. This can be done manually (by bending the wire around the shape), or it can of course be done automatically, feeding the wire into the machine to create the desired shape.

This is because the wire can be bent in all directions, cut, coiled and angled as needed to create specific shapes.

Why high-quality equipment is important

The manufacture of high-quality springs and wires depends on many factors, such as the manufacturer’s skills and knowledge, the quality of the materials, and of course the actual machinery used.

Our high-quality equipment allows us to keep up with demand, not only in terms of order volume, but also in terms of industry-specific requirements. This is because our modern machines allow us to use the latest software to design and manufacture complex shapes that meet the most stringent specifications.

With the best machinery on the market, we can provide customers with:

Even the most complex shapes can be repeated with precision; fast and reliable delivery; different production run scales; wires manufactured according to precise standards. We always put quality and customer excellence first-this includes adding the best equipment to our facilities so that we can continue to provide excellent results for our customers.

The automatic wire bending machine is a forming tool whose purpose is to assemble and bend the workpiece. These machines are easy to use and do not require any special skills to use. The operating cost of wire bending machines is lower because they require only half of the energy required by electro-hydraulic machines. The cable bending machine is used to bend the coiled wire into various irregular shapes.

Weijion is a professional wire processing equipment manufacturer, producing all kinds of wire stripping machines and terminal machines. If you are purchasing automatic wire bending machines, please contact us. We believe that weijion will be your best choice.

Recommended reading:

How to choose a fully automatic pipe cutting machine

What should I do if the automatic terminal machine overheats?

Reasons for abnormal shutdown of automatic terminal machine

[weijiang-automation]

Preparation work before use of dipping tin machine equipment

The development trend of society has promoted the development trend of several manufacturing industries, and also made everyone's daily life more and more effective. The comfort and applicability requirements of objects are getting higher and higher, especially in the aspect of electronic equipment. Dip tin machine is also a wire harness processing equipment used by many manufacturers. All equipment must be paid attention to when in use. The actual operation staff must have a certain grasp, which is conducive to our effective use of the equipment.

Fully automatic dipping tin machine is a kind of fully automatic industrial production equipment. Its quality is related to the high efficiency and expected effect of cable manufacturing. Every customer hopes to be able to purchase a high-quality fully automatic dipping tin machine. Weijion is able to provide you with high-quality equipment, and has a sound after-sales maintenance service. If the equipment has common failures, we will also have full-time personnel to give a complete solution.

The automatic dipping tin machine only needs to place the substrate with the flux on the needle frame, and then press the start switch once to complete the soldering of multiple substrates at a time. The time from the oblique angle of the substrate to the horizontal immersion tin and the angle of the substrate to discharge the tin are all controlled by a microcomputer, which fully simulates the principle of manual immersion tin and the principle of a wave soldering machine. It is more than 5 times the manual speed, the quality is stable, and the production efficiency can be improved.

Fully automatic tin immersion machine has high configuration, high total output and high cost performance. The automatic tin immersion machine is exquisite, compact design, good design concept, and small footprint. The structure is solemn, high-precision parts are all first-line brands, and they are durable. Let's discuss the operation process of the automatic wire cutting and soldering machine in advance and its actual operation implementation plan.

1. Fully prepared for the operation process

1. Check whether the equipment parts have fallen off, and whether the pneumatic components are leaking.

2. Trial run the equipment, check whether the equipment is operating normally, and find abnormal noises.

3.Turn on the power transformer and check whether everything is normal with the power transformer identification and whether the equipment is powered off.

4. Make it clear whether the cut cables are in accordance with the special safety and safety operating procedures.

2. Actual operation implementation plan

1.Turn on the power transformer, and pull the cut wire machine material to the right of the cutter head according to the wire feed wheel.

2. Set the required model specifications (varies according to the part number)

3. First cut out one or two for precise measurement. Check if there is any broken wire.

Various problems have arisen during the entire process of using the fully automatic multi-head soldering machine. At the beginning, the safety factor requires the staff to be as experienced as possible and deal with it carefully. Grasp the characteristics and characteristics of the fully automatic terminal machine. It is easy to improve the service life of the fully automatic terminal soldering machine. It is necessary to carry out multi-directional and meticulous maintenance of the equipment. The selection of the cutter head of the soldering machine and the installation method of the cutter head are also very important.

Weijion is a professional wire processing equipment manufacturer, producing all kinds of wire stripping machines and terminal machines. If you are purchasing an automatic tin immersion machine, please contact us. We believe that weijion will be your best choice.

Related Reading:

Application of wire stripping machine

Terminal machine correct operation steps

Automatic wire stripping machine troubleshooting table

[weijiang-automation]

Hand-held nylon winding machine use

In many cases, the sales of a product in the sales market are related to many stages, and basically involve all aspects of the product. Therefore, as far as manufacturers are concerned, many areas where products are produced and processed to the sales market must be improved and promoted. Only then can they have a certain amount of sales in the highly competitive sales market. There are many products that must be applied to the winding machine in the case of packaging, and nowadays, there are many winding machines on the market. Each type of winding machine often has some different advantages in application, especially at the level of application mode. Nylon winding machine is a very good one in the market, and this is still very much related to its application.

Although different types of winding machines can produce very good actual effects when they are applied, there are still some differences in specific application methods. The application of nylon winding machine is a very good improvement on the application of many traditional winding machines, so its overall application will be very easy. The first area to be improved depends on the actual operation of the automation technology. It is necessary to understand that there are many manual services that must be applied to the traditional winding machine in the case of application, and this is also very high in terms of packaging costs. However, most of the actual operation of this type of winding machine during the whole operation process can be carried out by automation technology based on the relative control system.

The second area of improvement depends on the software system of the nylon winding machine. Different products have different requirements on the elasticity of the tie when the packaging tie is carried out. Traditional cable tie methods use manual services to carry out these adjustments. This type of situation occurs in many cases, so the specific conditions of the cable tie vary. In that way, in many cases, it is also harmful to all normal market sales of the product. However, the software system of the new type winding machine can be adjusted according to the tension of the winding machine's straps on the computer under all normal applications. If the relative adjustment work is carried out, the tension of the straps of all products is uniform. of.

Basically, the application method of the nylon belt winding machine has been improved in the above two levels. Therefore, the machine and equipment have obtained very good market sales applications in the whole process of long-term market sales. After all, this is all closely related to the specific application, which means that it is more convenient for everyone in the application.

At this stage, there are two types of winding machine equipment on the market, hand-held and automatic, each of which is different in efficiency in the tie-up process. Therefore, this will have different characteristics in the course of work. If you want to cut with high-precision automation technology, the key is to understand the technical advantages in it. The handheld nylon winding machine has won the unquestionable and trust of most customers in the process of marketing and promotion in the market. What are the actual aspects?

First of all, the handheld nylon winding machine is the method of selecting the intelligent control system of electronic devices, which is equipped with high-precision imported electromagnetic brakes and rules and regulations, then the role of disassembly or power switch during the cutting process Next, its accuracy is getting higher and higher. Only by mastering the advantages of the equipment in the process of actual operation, you will understand that this is becoming more and more convenient in the application. The amount of shearing labor carried out during the enterprise's time is even more than five times that of the actual operation of manual services, and its technical performance has been greatly improved.

The hand-held nylon tying machine has a dexterous and precise posture in the hand-held condition, and it is very precise in the feeding process, so that the environmental protection and no noise technical advantages are still very good. After this is released on the market, we can see that the technical standards in the cable tie process are significantly enhanced, and we all hope to see the high-precision advantages in the actual operation process, and carry out the cutting characteristics of automation technology. In terms of design concept, it feels that its quality and performance are guaranteed.

The hand-held nylon winding machine has a good energy-saving effect during operation. Especially in the case of marketing promotion and application in processing and manufacturing companies, the cost of energy consumption is still quite small, and it is a level that most customers choose in the selection process. It is not difficult to see that after the cutting method of automation technology, it can be seen that the technical performance is very prominent, so that it has won the trust and recognition of many customers under the marketing promotion in the manufacturing industry. .

It is not difficult to see that the hand-held nylon winding machine, as a new generation of automated technology cutting equipment, has achieved half the effort in the process of cutting cable ties. It is very obvious at the level of manufacturing and processing technology, and it can be seen that the performance in the work is getting stronger and stronger. All of this is to understand the technical characteristics in the selection process.

Weijion is a professional wire processing equipment manufacturer, producing all kinds of wire stripping machines and terminal machines. If you are purchasing a hand-held winding machine, please contact us. We believe that weijion will be your best choice.

[weijiang-automation]

The advantages of using nylon cable tie machine

Nylon cable ties are often seen in people's daily life, and are generally used in wires or some products that must be bundled. This type of cable tie will have a very good effect of bundling when in use, and most of them are not easy to loosen. It is very important to understand that the effect that can be achieved is closely related to the use of the nylon cable tie machine, because when this product is bundled, it is based on the equipment to carry out the relative bundling work. Of course, because the use effect is more obvious, its demand in today's market is quite large. After all, most products must be bundled on many levels before they are sold.

In fact, many times the nylon cable tie machine has many benefits in use, and this benefit is due to its popularity from a certain perspective. The first benefit depends on the high efficiency of packing and bundling. The efficiency of the old strapping machine is very limited when bundling, and once the equipment runs for too long, it is prone to various problems. However, most of these problems are not easy to occur when using this type of cable tie machine. Since many stages of the equipment's work are fully automatic, there is no need for manual services to help. And it is generally very efficient when bundling, which is very helpful for the use in many industries.

The second benefit depends on the environmental protection and energy saving of the nylon tie machine. At present, every industry advocates energy conservation and environmental protection. For the processing and manufacturing industry, it will be very, very good if some equipment with relatively environmental protection and energy saving effects can be used in the whole process of normal manufacturing. After all, everyone's comments and recognition in the market are very high. Considering it from a long-term perspective, it also has a certain guarantee effect on the future development of the company.

The third benefit depends on the cost of using the nylon tie machine. No matter what kind of equipment you buy, everyone has to take into account the cost. Generally, the market price of the purchased product will be kept within the cost range as much as possible, so that it is not easy to increase the manufacturing cost when it is used. But if the equipment is used, it is still very cost effective and economical. Most manufacturers will also have relative specifications for the price when selling, so most of the time the price level is not easy to have a big problem.

Weijion is a professional wire processing equipment manufacturer, producing all kinds of wire stripping machines and terminal machine equipment. If you are purchasing a nylon cable tie machine, please contact us, we believe that weijion will be your best choice.

Recommended reading:

Hand-held nylon winding machine use

About handheld tape winding machine

How to choose automatic wire bending machine equipment?

[weijiang-automation]

The difference between fully automatic and semi-automatic terminal machine

The automatic terminal machine is one of the products we use more, but there is also a semi-automatic terminal machine, which means that half of these products also need manual work, and the two are different terminal machines. Therefore, the way of working is also different. It can be said that the difference is quite big, but have you ever understood the main difference between the automatic terminal machine and the semi-automatic terminal machine? You can listen to the introduction of the automatic terminal machine manufacturer Weijion. You can learn more about which one is right for you.

Let us understand the difference between automatic terminal machine and semi-automatic terminal machine

1. The automatic terminal machine is fully intelligent and automatic. It integrates integrated circuits, servers, robots, detection signals, and integrates all production steps of wire processing into one power cord processing equipment. When running, it can save a lot of manual operations. It only needs to set the working mode and give the servo a working signal. This signal will be transmitted to the working drive motor through a series of components, and then realize the start and stop of the work. The entire workflow is fully automated, so the work is more efficient and manpower-saving.

2. Semi-automatic terminal machine is a relatively common terminal machine equipment, and we all refer to it as a terminal machine. The semi-automatic terminal machine used to be the most used equipment on the market because of its strong applicability. The semi-automatic terminal machine is controlled by a foot-operated power-off clutch device to control the terminal action of the machine by manually stepping on it. The single processing action of the semi-automatic terminal machine is only to punch the terminal, and the wire also needs to be manually divided and fed, and the work efficiency is lower than that of the automatic terminal machine.

Because the price of automatic terminal machines is higher than that of semi-automatic terminal machines, most of the terminal machines of many enterprises are still semi-automatic terminal machines. However, with the progress of the times, the automatic terminal machine has become the core equipment of automatic wire processing enterprises. With the development of the enterprise, the automatic terminal machine will gradually replace the semi-automatic terminal machine, which is the trend of future enterprises. If you need these two products or terminal copper tape, automatic pipe cutting machine and other mechanical equipment, you can contact us.

Kunshan Weijiang Automation Equipment Co., Ltd. is a modern technology enterprise specializing in the processing, cutting and research and development of wire harness equipment. We have strong technical research and development strength, strong after-sales service team and sophisticated processing equipment. Our machines are exported to more than 20 countries.

Related Reading:

Technical inspection of automatic terminal machine

What should I do if the automatic terminal machine overheats?

Analysis of the working principle of the terminal machine

[weijiang-automation]

What kind of CNC system is the automatic pipe cutting machine

The automatic pipe cutting machine is a very high-quality mechanized equipment. After the automatic pipe cutting machine is used, the whole work of cutting the pipe is more simple and convenient. It is also more reasonable to operate. There are many choices and demands for fully automatic pipe cutting machines in the industry. This time, weijion, the manufacturer of the automatic pipe cutting machine, will talk about what the CNC system of the automatic pipe cutting machine is like.

How does the CNC system of the automatic pipe cutting machine work?

Generally, the CNC system of pipe cutting machine consists of control system, servo system and position measurement system to form a complete closed-loop control CNC system of pipe cutting machine. The control system is mainly composed of bus, CPU, power supply, memory, operation panel and display screen, position control unit, programmable logic control unit and data input/output interface. The servo drive system mainly includes a servo drive device and a motor. The position measurement system is mainly an incremental displacement encoder using a long grating or a circular grating.

The main features of the CNC system of the pipe cutting machine: high reliability requirements, high environmental adaptability; complex interface circuit, the numerical control system of the pipe cutting machine should be matched with various numerical control equipment of the pipe cutting machine and external equipment, and the production should be processed at any time. Various situations in the process adapt to various technological requirements of the equipment, so the interface circuit is complicated and the work is frequent.

Conditions that should be met in terms of maintenance: 1) Prepare common spare parts and accessories; 2) Get actual support or supply of microelectronic components at any time; 3) Necessary maintenance tools, instruments, meters, wiring, and microcomputers. It is best to have a small programming system or programmer to support equipment debugging; 4) Complete information, manuals, circuit diagrams, maintenance instructions (including CNC operation instructions), as well as interface, adjustment and diagnosis, drive instructions, PLC instructions (including PLC user manuals) program list), component table, etc.

The selection effect of the automatic pipe cutting machine is very good, and the feeling of using it in the numerical control system is great. If you know the numerical control system of the automatic pipe cutting machine better and know how to control it, the effect of using it will be even better.

The numerical control use of the automatic pipe cutting machine is briefly introduced. If you want to know more about the automatic pipe cutting machine, please continue to pay attention to our official website, we will continue to update the news of wire harness processing.

Kunshan Weijiang Automation Equipment Co., Ltd. is a modern technology enterprise specializing in the processing, cutting and research and development of wire harness equipment. We have strong technical research and development strength, strong after-sales service team and sophisticated processing equipment. Our machines are exported to more than 20 countries.

Our main products are: winding machine series, wire cutting and stripping machine series, wire terminal crimping machine series, pipe cutting machine series. In addition, our factory accepts the research and development and production of non-standard automation equipment.

Recommended reading:

Technical inspection of automatic terminal machine

What should I do if the automatic terminal machine overheats?

Insulated terminal crimping machine

[weijiang-automation]

Application of double faces transmission shrinkable tube heating machine

The double faces transmission shrinkable tube heating machine (local heating does not damage the wire) is especially suitable for the processing requirements of the wire harness processing enterprises for the ddouble faces transmission shrinkable tube heating machine.

Application in Connector

Structural connection

double faces transmission shrinkable tube heating machine can be used to strengthen the connection between electrical connectors and cables (see Figure 1). When the cable and the electrical connector are connected, put on the double-sided transmission heat shrinkable tube heater to heat and shrink. This can improve the connection strength, electrical performance and tightness of the connection part. The double-sided transmission heat shrinkable tube heater will become hard when it shrinks, so the double-sided transmission heat shrinkable tube heater should not be too long, otherwise it will affect the use. If hot melt glue is added to the connection part, the effect is better. According to the relevant information, the connection part can withstand the atmospheric pressure of 98MPa.

As an insulator

The insulators on the outer surface of many terminals are not only complex in shape, but also have a thin wall thickness. The plastic mold of this insulator is difficult to manufacture, and the double faces transmission shrinkable tube heating machine is used to solve this problem (see Figure 2). The specifications of the double faces transmission shrinkable tube heating machine should be selected according to the requirements of the technical characteristics of the connector.

Assembly points

To ensure a firm and reliable connection, the size selection of the double faces transmission shrinkable tube heating machine is very important. The best selection principle for the size of thedouble faces transmission shrinkable tube heating machine is the outer diameter of the protected object is less than 0.9X the inner diameter of the double faces transmission shrinkable tube heating machine before shrinking, and it is greater than 1.2X the double-sided transmission heat shrinkable tube. The inner diameter of the heater after shrinkage. The axial shrinkage rate of the double faces transmission shrinkable tube heating machine is about 10% to 16%. Due to the irregularity of the rear end of the heat shrinkage, a trimming allowance should be reserved. The length of the blanking of the double faces transmission shrinkable tube heating machine should be considered the above two factors. As shown in Figure 2, when the double faces transmission shrinkable tube heating machine is set, the right end should grow about 3mm from the end face of the part, and the end can be flattened after heat shrinking.

In my country, the application field of double faces transmission shrinkable tube heating machine can be said to penetrate into all sectors of the national economy, and it is a promising emerging industry.If you are purchasing double faces transmission shrinkable tube heating machine, I believe Weijion will be your best choice.

[weijiang-automation]

The working principle, classification and characteristics of the winding machine

Winding machine is also known as winding packaging machine, film wrapping machine, film winding machine, etc. Its function is to prevent the damage of goods in the process of transportation during logistics and transportation, and can play the role of dustproof, moisture-proof and cleaning, and is widely used in foreign trade. Containerized cost of export, food and beverage, plastic chemicals, glass ceramics, electromechanical castings and other products.

The working principle of the winding machine

The working principle of the winding machine is to place the winding object on the turntable, and then start the motor to rotate, and the turntable rotates, so that the object realizes the packaging machinery for peripheral winding packaging. At the same time, the elevator motor also starts, and the winding machine drives the winding and strapping machine. The assembly moves up and down to achieve the winding in the height direction of the object, which can complete the winding and packaging of the entire object.

Classification of winding machines

Winding machines can be divided into eight categories according to the different winding goods:

1. Pallet wrapping machine: It is specially used for wrapping pallet goods with film wrapping.

2. Cylinder winding machine: specially used for packaging cylindrical goods, such as roll paper, roll paper, non-woven fabric, etc.

3. Online winding machine: realize assembly line operation, and the goods on the equipment turntable rotate.

4. Rocker arm winding machine: the assembly line works, the goods do not move, the equipment rocker arm rotates and rotates around the goods.

5. Horizontal winding machine: wrapping long-shaped goods, such as profiles, furniture, pipes, etc.

6. Baggage winding machine: a device specially used for packing at the airport.

7. Palletless wrapping machine: pack single or multiple carton packs, which can be manually turned over to achieve six-sided wrapping.

8. Ring wrapping machine: wrapping wrapping of ring-shaped products, such as single tires, wheel hubs, strip steel, etc.

The main application features of the winding machine

1. The running structure is stable.

2. Start and stop the device slowly, and avoid falling of the upper packaging.

3. Digital electronic control loop, high stability and low failure rate.

Fourth, the upper and lower packaging layers can be set by inputting data

5. Touch screen, easy to operate.

Kunshan Weijiang Automation Equipment Co., Ltd. is a modern technology enterprise specializing in the processing, cutting and research and development of wire harness equipment. It has strong technical research and development strength, strong after-sales service team and precise processing equipment. The company's main products are: winding machine series, wire cutting and stripping machine series, wire terminal crimping machine series, pipe cutting machine series. If you have a need for the winding machine, especially handheld tape winding machines,please contact us.