Don't wanna be here? Send us removal request.
Statistics
We looked inside some of the posts by abcgardentool and here's what we found interesting.
Average Info
Notes Per Post
0
Likes Per Post
0
Reblog Per Post
0
Reply Per Post
0
Time Between Posts
26 seconds
Number of Posts By Type
Text
9
Link
8
Last Seen Tumblr Blogs
Fun Fact
Tumblr has a low social media market share in South America.
Text
Classification of pruning scissors
There are three types of pruning shears: manual, rechargeable and pneumatic, each with its own advantages and disadvantages: (1) Manual branch shears are easy to operate and will not be restricted by the environment. The disadvantage is that they are prone to fatigue after operating for a long time. (2) The rechargeable tree pruner is also labor-saving, that is, it is easily affected by the battery and has a limited use time. (3) Pneumatic tree shears are also a relatively labor-saving, suitable for long-term operation, as long as the air pressure is sufficient, the operation will not be easy to fatigue.
http://www.gardentoolmanufacturers.com/garden-tool-rack/
0 notes
Text
Common methods of turning the ground
Flat turning: The flat turning method is a method that is widely used in spring soybean cultivation areas to fully plow the cultivated layer with machinery. The appropriate depth of tilling and turning is 20-22 cm, and the depth of spring turning should be 5-7 cm shallower than autumn turning. The standard for plowing should be as follows: the field is level, the depth of tillage is the same, the width of tillage is the same, and the land is the same, and no heavy ploughing and no omission of ploughing should be ensured. Stubble: Stubble is a method of shallowly turning and sowing soybeans. The stubble depth is generally 12-15 cm. Soybean stubble cultivation method: When the previous crop is wheat crops, immediately after the spring wheat is harvested, use the double-row disc harrow to harrow the stubble, and use the diagonal raking method to harrow twice, and then grow thin and long before sowing in the second year. Level, reach the most suitable state for sowing. When the previous stubble is corn, sorghum and other crops, for fields with deep plowing or deep loosening, the stubble can also be raked in autumn to pick the clean stubble, and then rake the stubble evenly. Ridge turning: Ridge turning is a traditional farming method adopted by farmers in Northeast China. The specific method of ridge turning is different due to the different crops of the previous crop.
http://www.gardentoolmanufacturers.com/
0 notes
Text
The characteristics of iron rake
1. The iron rake is one of the main labor tools in the past farming era, and its main function is to build and turn fields and columbine fields. Although modern agriculture has basically achieved mechanized operations, there are still many farmers, and iron rakes are still kept as an auxiliary field tool, and they are often used. 2. The iron rake has a long handle, which is used as a gripper. 3. The main function of the iron rake is that there are several sharp iron teeth on the front iron head. There are three teeth, four teeth, six teeth, and more such as nine teeth. I haven't heard of those with more than nine teeth, probably because they are too big and heavy and inconvenient to work. The sharp teeth in front of the iron head are used to build and turn fields, or flat fields. 4. The main material of the iron rake, as the name suggests, the iron head at the end is made of iron. 5. The handle of the iron rake is generally made of wood or bamboo. The characteristics of the wooden or bamboo handle are that it is light and flexible when working, can take materials on the spot, and can be easily replaced after damage. In recent years, some iron handles have also appeared, such as thin-walled steel pipes, stainless steel pipes and so on.
http://www.gardentoolmanufacturers.com/pruning-shears/
0 notes
Text
Classification of garden tools
Gardening tools include garden scissors, flower tools (garden flower tools, small flower sets), etc. The main products of garden shears are high branch shears, hedge shears (hedge shears), pruning shears (pruning shears, pruning shears), multi-purpose shears, fruit picking shears, flower shears, grass shears, etc.; garden set of flower tools (garden Flower tools, small sets of flower tools) including flower shovel, flower shovel, flower rake, flower hoe, flower fork and so on. Garden machinery mainly includes: lawn trimmers, brush cutters, hedge trimmers, chainsaws, water pumps, punches, drafting machines, sprayers and various garden tools. With the development of urban construction in China over the past few years, urban greening has formed a large industry, and daily maintenance depends on these tools. Most of the garden tools powered by gasoline engines, such as lawn mowers, pruning shears, lawn mowers, trimmers, brush cutters, etc., are commonly seen in daily life.
http://www.gardentoolmanufacturers.com/garden-rake/
0 notes
Text
The characteristics of garden tools
Garden tools refer to tools used in gardens and other aspects. Classified according to the occasion of use, garden tools include garden tools and garden tools. According to the classification of the objects of use, it can also be divided into household tools and professional tools. According to the different power, it is divided into engine type and electric type. The engine type uses 2-stroke or 4-stroke engine. Honda or BS are the first choices for high-end products; electric type is subdivided into AC type and DC type.
http://www.gardentoolmanufacturers.com/wheelbarrow/
0 notes
Text
Precautions for tree pruning
1. The cutting mouth of the pruning branches should be smooth, and the inclined plane at a 45-degree angle to the cutting mouth bud, fruit tree pruning shears, cut down from the opposite side of the cutting mouth, the upper part of the inclined plane is level with the cutting mouth bud tip, and the lowest part of the inclined surface is the bud. The base is flat, so that the cut surface is small, easy to heal, and the bud grows quickly after germination. Cut the sparse branches at the branch point, level with the stem, leaving no residual piles. The sparse branches of bushy shrubs are level with the ground. The direction and quality of cutting buds determine the growth direction of new shoots and the growth direction of branches. The direction of cutting sprouts should be considered from the distribution of branches in the crown and the strength of the expected growth of new branches. When the crown needs to be expanded outwards, the cutting sprouts should stay on the outside of the branches. Inward, for the overgrown branches, in order to suppress the growth of the branches, use weak buds as cut buds, and choose full and strong buds when supporting weak branches. 2. The pruning period of deciduous trees and evergreen trees should be different. In winter, deciduous trees stop growing. At this time, pruning loses less nutrients and wounds heal faster. Although evergreen trees are dormant in winter, there is a danger of freezing damage if the branches and leaves are cut off. Since the roots, branches and leaves of evergreen trees are active throughout the year, and their metabolism is not stopped, the nutrients in the leaves are not completely used for storage. When the branches and leaves are cut, the nutrients are lost, which affects the growth of the trees. The pruning period of evergreen trees is generally in late spring when winter has passed. 3. When pruning larger branches and trunks, a step-by-step operation method can be used. First cut the cut 20 cm above the required saw cut from the bottom of the branch up to the depth of half the thickness of the branch. Saw the branch from above, leaving a residual pile, and then saw the residue from the saw cut. Pile, can avoid the branches and trunk walls from cracking. 4. When sawing off the larger branches and stems, the wound surface is larger, which often rot due to rain or the invasion of germs. Therefore, when sawing the branches and trunks of trees, the saw cut must be flat, disinfected with 20% copper sulfate solution, and finally coated with a protective agent (protective wax, blending paint, etc.). Plays the role of antiseptic, anti-drying and promoting healing. 5. During pruning, the tools should be kept sharp, and the tree-climbing machinery and stepladder should be checked for flexibility and looseness before use to prevent accidents. Fasten the safety rope when climbing the tree. When working near high-voltage lines, pay special attention to safety and avoid electric shock. If necessary, please cooperate with the power supply department. When pruning the sidewalk trees, there is a dedicated person to maintain the site to prevent the large branches from being sawn and hurting the passing pedestrians and vehicles.
http://www.gardentoolmanufacturers.com/
0 notes
Text
Commonly used gardening tools
1. Flower shovel: Small and light, easy to control, can be used for transplanting, soil cultivation, soil loosening, weeding and other tasks. For planting in flower troughs or flower pots, flower shovel can replace large tools such as hoe, rake, shovel, etc. It has a wide range of uses and is a tool that must be purchased. But be careful, because the tool is small and the connection between the handle and the shovel body is most likely to break, so use it carefully. There are different styles on the market to choose from. Among them, the handle and the body are connected together, and the one cast in one time is more durable. 2. Branch shears: can be used for pruning, and it is also suitable for harvesting melons and beans. Also because of its light weight, it is easy to lose, and the spring in the middle is also very easy to lose. There are many styles on the market, and the price difference is quite big. Generally speaking, the more expensive the sharper, but ordinary scissors can complete the task for general gardening work. If young participants are afraid of hurting themselves and others while playing, consider using round-head scissors. 3. Flower pot: can be used for watering and liquid fertilizer. Metal is more durable than plastic, and you need to be careful. Generally, the most vulnerable part of a plastic flower pot is its spout. After each application of liquid fertilizer, it needs to be cleaned before storing. Gardening tools are mostly metal products, and they will inevitably come into contact with water and soil when they are used. Therefore, after using them, remember to wash the soil off the utensils with water, wipe off the water, and dry them before storing. It can be polished if necessary. 4. Portable sprayer / spray bottle: is mainly used for spraying water and natural pesticides. The water can be sprayed out in a mist, making it easier to evenly sprinkle on the plants. Its effectiveness depends on whether the sprayed water points are small and uniform. Most of the nozzles of the portable sprayer are slightly curved, which is convenient for spraying the medicine to the bottom of the leaf. Please remember to clean it after use to avoid clogging the water outlet with impurities. Although the spray bottle is not as accurate as a sprayer, it is still a cheap and good choice.
http://www.gardentoolmanufacturers.com/
0 notes
Text
Precautions for lawn mowers
In order to make garden tools more efficient, we didn't have to make preparations when using garden tools. Garden tool manufacturers talked about the preparations for lawn mowers before use. In fact, we must pay attention to safety before operating its products! First of all, we can carefully check the various parts to ensure the smooth progress of the weeding. Secondly, check whether there is enough fuel in the mail tank and check the air filter. It is important not to make the air filter dirty. The important thing is to check whether the blade installation nut is loose and whether the blade has cracks, nicks, bends and wear. Once a problem is found, it needs to be replaced immediately.
http://www.gardentoolmanufacturers.com/
0 notes
Text
Use skills of chain saw
1. Chain saw is the abbreviation of gasoline saw chain or gasoline powered saw. It is a powered saw used for logging and lumbering. The chain saw engine is a two-stroke engine. The fuel used is a mixture of engine oil and gasoline. The fuel configuration should not be randomly matched. The fuel must be matched strictly in accordance with the fuel dispenser attached to the machine. The mixed oil must be prepared for immediate use, and the mixed oil that has been configured for a long time cannot be used. The following article will give you a detailed introduction to the common knowledge of chain saws, and I hope it will be helpful to you.
http://www.gardentoolmanufacturers.com/
0 notes