alldvalledup - Tumblr blog

[alldvalledup]

[alldvalledup]

Via RedIslandSeaGlass

[alldvalledup]

love characters who (for whatever reason) absolutely cannot smile for the life of them. they just don’t know how. they don’t have the training. but then they do anyway and it’s the most beautiful thing you’ve ever seen in your life

[alldvalledup]

no thoughts head empty

[alldvalledup]

[alldvalledup]

Calm down old friend....

[alldvalledup]

no see the thing is I think he has a point

[alldvalledup]

Afternoon, Max Ritvo

[alldvalledup]

Listen to your elders

So last week I posted abut the importance of downloading your fic. And then three days later AO3 went down for 24 hours. No one was more weirded out by this than I was. But while y’all were acting like the library at Alexandria was on fire I was reading my download fic and editing chapter eight of Buck, Rogers, and the 21st Century. And also thinking about what I could do to be helpful when the crisis was actually over.

So first off, I’m going to repeat that if you’re going to bookmark a fic, you really need to also download the fic and back it up in a safe place. I just do it automatically now and it’s a good habit to get into.

But let’s talk about some other scenarios. Last October I lost power for over a week after hurricane Ian. Apart from not having internet or A/C I did find plenty to do, I collect books so I had plenty to read, but maybe, unlike me, your favorite comfort reads aren’t sitting on a bookshelf. So let’s do something about that, shall we?

In olden times many long years ago around 1995 we printed off a lot of fic. It was mostly SOP to print a fic you planned to reread and stick it in a three ring binder. And that’s totally valid today too, but you can also make a very nice paperback with a minimum amount of skill and materials.

Let’s start with the download; Go to Ao3 and select your fic, we’ll be working with one of mine. This method works best with one shots, long fic tends to need a more complicated approach. Get yourself an HTML download

Open up the HTML download and select all then copy paste into any word processor. Set the page to landscape and two columns, then change the font to something you find easy to read, this is your book, no judgement. This is all you have to do for layout but I like to play a little bit. I move all the meta, summary, notes to the end and pick out a fun font for the title: 

No time like the present to do a quick proofread. Congratulations, you’ve just created your first typeset. On to the fun part.

Now you’re going to need some materials:  8.5x11in paper ruler one sheet of 12x12 medium card stock (60-80lb) scissors pencil pen or fine tip marker sheet of wax paper white glue two binder clips 2 heavy books or 1 brick butter knife

You’ll also need a printer, if you’re in the US there is almost a 100% chance your local library has a printer you can use if you don’t have your own. None of these materials are expensive and you can literally use cheap copy paper and Elmers glue.

Print your text block, one page per side. Fold the first page in half so that the blank side is inside and the printed side out:

use the butter knife to crease the edge. Repeat on all the sheets. When you’ve finished, stack them up with the raw edge on the left and the folded edge on the right. I used standard copy paper, because you’re only printing on one side there’s no bleed to worry about. Take the text block and line everything up. Use the binder clips to hold the raw edge in place.

Wrap the text block in the wax paper so that the raw edge and binder clips are facing out. I’m going to use my home built book press but you don’t need one, a brick or a couple of books or anything else heavy will work fine.

Once the text block is anchored down, take off he binder clips and get out the glue.

You can use a brush but you don’t need one, smear some glue on that raw edge.

Go make a margarita, watch The Mandalorian, call your mother. Don’t come back for at least an hour

In an hour smear some more glue on there and shift your brick forward so that the whole book is covered. This keeps the paper from warping. While glue part 2 is drying we’ll do the cover. Get out your 12x12 cardstock

Mark the cardstock off at 8.5 inches and cut it. Measure in 5.5 inches from the left and put in a score line with the butter knife (the back edge not the sharp edge)

Carefully fold the score line, this is your front cover. You have some options for the cover title, you can use a cutting machine like a cricut if you have one, you can print out a title on the computer and use carbon paper to transfer the text to the cardstock. I was in a mood so I just freehanded that beoch. Pencil first then in pen.

Take your text block out from under your brick. Line it up against the score mark and mark the second score on the other side of the spine

Fold the score and glue the textblock into the cover at the spine. Once the glue dries up mark the back cover with the pencil and then trim the back cover to fit with your scissors.

Voila:

I’m going to put this baby on the shelf next to the Silmarillion.

The whole process, not counting drying time, took less than an hour.

If you want to make a book of a longer fic, I recommend Renegade Publishing, they have a ton of resources for fan-binders. 

[alldvalledup]

[alldvalledup]

Soo did y'all know you can get a soldering iron for 8 bucks? I didn't. I do now. I'm about to burn the shit out of myself.

[alldvalledup]

venti

[alldvalledup]

it’s always so meaningful when someone interprets you accurately, or says a spark of a phrase, a half-a-sentence, that resonates with you so intimately that it feels like they’ve dipped a finger in a lake of you and made a ripple that goes on and on and on

[alldvalledup]

Okay so there are some genshin designs I really like

[alldvalledup]

was in the car with my friend when I saw the car we passed had the license plate "SADNESS" and I went oh wait we gotta slow down so I can get a pic, but every time we went slower the other car also slowed down. so I looked behind us to see what was going on and the passenger also had their phone up and wheezing the same way I was, and that's when I remembered my friend's license plate is "LOSSJPG"

[alldvalledup]

“A cloud atlas symbolizing Dvalin and his former master, the Anemo Archon. It details the winds and clouds of the northern regions and contains the powers of the sky and wind” -Skyward Atlas description

[alldvalledup]

so true beastie *we are laying in a field of dandelions and i am petting your massive snout* *you are 30 feet long and i love you*