amiibo420-blog

[amiibo420-blog]

use these arduino sketches and hook up a RC522 NFC shield to the board

https://github.com/konstantin-kelemen/arduino-amiibo-tools

here is my arduino/RC522 shield ghetto set up

open up the dump info sketch from the library, upload the sketch to your board, after doing so open up the serial monitor and keep an out for your UID tag

then

navigate to https://games.kel.mn/amiibo/

enter the blank UID tag,amiibo bin and key retail.bin (use google)

then copy to clipboard

open the write amiibo sketch, copy the hex numbers into the sketch ( starting around line 47 and ending around line 181 )

upload the sketch to your board and then you can write to your blank NFC card.if you please you can watch on the serial monitor the writing of the .bin file to the NFC card.

Now that amiibo bin file is written to your card,open up super smash and goto the amiibo menu and scan your brand new card and it should load right up!

Amazon shopping list

Enjoy!