andrewchatergy813-blog

[andrewchatergy813-blog]

192.168.2.1 router setup dashboard

Hey guys what’s up! From my couple of days of research, I have found that many of you are looking for 192.168.2.1 belkin router setup dashboard. Still now if you are looking for the same thing then you are at the right post. Because in this article we are going to discuss how to setup Belkin Router.

What Is 192.168.2.1

It is nothing but a Default gateway which allows you to access your Belkin router Console page by using the Local machine. It is the IP address of BELKIN router which allows to access and configure Belkin router setup And settings.

How to Setup Belkin wireless Router.

•    At the first turn on your Router.

•    Then open any of the web browsers on to your computers such as opera mini, internet explorer, Google Chrome and etc. Then on the address bar of the web browser enter your router default IP address. Then press Enter.

•    After entering the IP address of the Router, Now a new Login page of Amped Wireless Router Will open, Where you have to enter the Default Username and password of your Router.

 •    Once you enter correct username and password, You will be login into your Router main admin page.

•    Now go to Advanced Section, then under the Advanced section, you will find one option called Setup. You have to click on that Setup option. From where you will be able to setup your Amped wireless Router as per your need.

IN THIS above way you will be able to 192.168.2.1 router setup.

How to Update Belkin Router firmware

•    You have to login into your Belkin Router and then go to settings, now check for the update if there then Download Belkin Firmware setup. Now install the latest Firmware into your Belkin router.

[andrewchatergy813-blog]

Quality of service for Netgear wifi router

Quality service is an progressive feature that orders internet traffic for application, ethernet LAN ports,stated or online gaming MAC addresses to minimize the impact of busy bandwidth.

To create a policy for Ethernet LAN port.

1. Connect your computer to Nighthawk router.

2. Open your browser and type login routerlogin net setup onthe address bar.

3. Here you enter a username and password enter the username is admin and password is a password if default login credentials do not work might have changed the admin if you cannot remember new password must perform a factory reset to restore the router.

4. Here you see genie home page display.

5. Click advanced then setup and then QoS setup then upstream QoS and Tap setup QoS rule.

6. QoA priority rule list displayed scroll down and click add priority rule.

7. Priority rules screen display under priority category select ethernet LAN port.

8. Under LAN port Tap your desired LAN port.

9. Under priority select highest, high, normal or low select internet access priority for the port traffic relative to other the apps.

10. Click Apply.

To configure your router for cable internet connection.

1.Connect the modem to internet port of Net gear router and computer to any of four port.

2. Switch your PC router and broadband, off and on again wait for them all finish booting up.

3. Open a web browser and type router login net setup the router  IP address which would be either in the address bar and press enter, your default username is admin and the default password is password.

4. Tap setup wizard.

5. Tap yes and click next.

6. Click next router saves settings.

7. To check if you are connected to internet select router status under the maintenance.

[andrewchatergy813-blog]

Website filtering for dlink

The following are the various steps involved in the set up the Website Filtering on your router.

•             First of all, you have to open the browser that you are using like Mozilla Firefox, Google Chrome, Internet Explorer etc. Then type the web address http://dlinkrouter.local into the address bar menu and then press enter, you can also search for setup dlink extender.

•             After that, you will be redirected to the basic home page that asks you to enter the login details for your router devices like the userName and Password.  The default username for your router is Admin and the default password is Blank (nothing). After entering the login details just click on the Login icon.  

•             After login, a web page appears to you have the following option on the top like SETUP, ADVANCED, TOOLS, STATUS, SUPPORT. You have to click on the ADVANCED tab on the top of the page and then website filter on the left screen.  Then from the Configure Website Filter below select the option “Deny computers access to only these sites”.  Then enter the URLs or Website Domain name that you want to block on this router.  Click the Save Settings at the end to save the settings that you have made.

•             The next step is to go to the Access Control section and then to enable the access control settings, just click on the checkbox. You have to set up a policy on the router for the Website Filter by using Access Control.  Click on the Add Policy to proceed further and then click next.

•             In the next step, you have to enter the Policy name and then click Next.

•             Select the name and schedule it and then click Next.

•             After that select the machine to which the policy applies by using the MAC or IP address and then click on the Next.

•             After selecting the filtering method and Enable or Disable Web Access Logging, click the save icon.

[andrewchatergy813-blog]

VPN settings for your Netgear wifi router device

You can access your home network through the internet when you re away from home using the  VPN Service function.  In addition to this you can access the various internet sites, when you are roaming outside the country that you may not usually allow to access due to the geographical limitations.  You need to connect to the internet through your router to use the VPN service.  To locate your router there are two different ways.

•             The Dynamic DNS service

•             The second alternate option is through the public Internet address of your router.

You need to make sure that you have either of the static IP address settings or the Dynamic DNS service settings enabled for your internet connection.  The VPN service only OpenVPN clients and not work with any other VPN clients.  

The following are the steps that need to follow if you are using your iOS device to access the VPN service on your Nighthawk router.

•             Launch the web browser that you are using and type the address http routerlogin.net in the search bar menu and then press enter.  If you encounter problems while accessing this address then you can also search for routerlogin net start.

•             Then you need to fill in your login details like username and password.  Type the username as “admin” and the password as “password”.  

•             Then go to the Advanced Setup under the Advanced option, and then tap on the VPN Service.

•             Click on the Enable VPN Service and then tap on the Apply.

•             By clicking on the For Smart Phone button you can now download the OpenVPN configuration package.

•             After that extract smartphone.zip.

•             Find OpenVPN and install it via the App Store or iTunes.

•             In the next step connect your iOS device to the computer to locate the files that you extracted earlier.

•             Open the  OpenVPN and tap the + button visible on the screen.

[andrewchatergy813-blog]

Roblox friends handle from your computer

For the lovers of the games, robolox is among the most trending games. In this World of the games and technology, there are millions of games that are available in the market and for you it becomes difficult for you in handling the games. But you do not need to worry when we are here. In this blog, we will help you in learning to manage the user account of your roblox app.

In the information, which is described below helps in managing the friends on your robolox account

Step 1: start the web browser from your computer and visit to the official website of robolox.com and the web browser that you are using may be anyone like Mozilla Firefox, Google Chrome or internet explorer.

Step 2: Now, move to the option of the friend list and make a search for the friend whom you want to delete from the list.

Step 3: After receiving the name of the searched friend you will also have receive the option for deleting that particular friend.

Step 4: After clicking on the option of unfriend, that friend will not be more in the list of your friend.

If you want to check for the friend list again, then you will see that the deleted friend will not be in the list of your friend.

In some of the case, the game users want to unfollow their friend for doing that you have to follow all these steps

Step 1: Using your browser, just visit to the official website of the Robolox and login to its webpage of the app www.roblox.com.

Step 2: After visiting its login page, you will be asked to enter the details of the username and the password.

Step 3: Move to the option of the friend list in your profile list

Step 4: Make the selection of friend to whom you want to unfollow.

[andrewchatergy813-blog]

DDNS settings for Asus wifi router

Wifi routers are very common and errors that occur in the asus wifi routers are also very common. But you do not have to worry regarding all those errors when we are here to get all your problems away. Just keep on following our website and have the best guidance in terms of the troubleshooting problems.

In our website, we have explained all the steps in such a way so that it becomes easy for everyone in understanding the steps and how to apply all those steps:

Step 1: Visit to the website of www asus.com and choose the option for the DDNS client or Asus router login 192.168. One thing that you keep in your mind is that this service is completely free of cost.

Step 2: You need to enter the details of the host name, which is displaying under the option of the host name. If you find the domain name that you have entered has already been registered. You have to consult to the support team of the asus wifi routers immediately.

Step 3: After the completion of the addition of the configuration just click on the button of apply and this will help you in getting all of your setting saved successfully.

The other options that you will see here are adapter QoS, USB application, AI cloud 2.0, network map, guest network, Ai protection, reboot, logout, internet connection, port trigger, DMZ, NAT passthrough, virtual server or port forwarding, quick internet setup and much more. You will be cleared more about the options that you will get from the image that we have shown to you in this blog.

Here are the things that you must keep in your mind

Note 1: You must be using the wireless type of private network which are having IP address like 192.168 etc etc.

[andrewchatergy813-blog]

For those parents who are concern about the safety of their kids, this router is the best option for them because this router is having the feature of parental control. You can easily make the transfer of data from one device to the other with the speed of around 1GHz which is very much fast as possible and desired for transferring the heavy files.

[andrewchatergy813-blog]

The router basically works as a decoder for the radio signals. We suggest you use the Belkin Wireless Router. As it helps in connecting more number of wireless as well as wired devices. Also, it helps in expanding the wireless network range also. The most important is that the Belkin router login is very easy to do and you can do the set up in few minutes.

[andrewchatergy813-blog]

If you or your kid wants to register yourself on this game, then you must age 13+ and you must require an adult supervision. If you find that someone is trying to chat along with you or sharing some type of mature content along with you then you can easily block them.

[andrewchatergy813-blog]

Why Internet Is Slow In My Laptop?

Internet is one of the most inconsistent things when it comes to networking. Sometimes, from the same internet connection, the internet speed might be used and at other times, it might be really slow. There can be situations where the internet connection is slow only in one of your laptops, but on any other device, it is absolutely alright. There are many reasons why this might be possible.

Probable Reasons For Slow Internet Speed In Laptop

1. You have to check how many devices the internet is connected to. If you are subscribed to an internet plan which is unlimited and there are many devices which are using the same wireless internet connection, it is most obvious that the speed won't be that fast in your laptop. This is because the bandwidth is usually really less and most of it is being consumed by other devices already. If you have a router of Netgear, go to http Netgear router login page. After you have logged into it, you can watch, who are accessing your internet connection. You can even block or limit some of them, if you want to.

2. Check the different types of adwares which might be installed in your laptop. These consume a lot of bandwidth at once and showcase unwanted ads. You don't want that to happen, do you?

3. Turn off automatic updates this might be already on in your laptop. This is because the auto-updates take up too much of speed had also unwanted memory storage. Update those apps that you want to update and when you want to update. Windows will start updating automatically if you have not set it properly. Change the configuration and get a better internet connection speed always.

[andrewchatergy813-blog]

The forgotten password and username has a solution, one can always reset the details through the reset button and by putting the details to verify.Most of the time, users confuse in entering the https://router.Asus.com address in the search bar instead of the address bar. What it does is that the search bar would take the user to result on the web.

[andrewchatergy813-blog]

The Belkin N300 F9k1111UK encompasses with excellent Range Extender projectionists into its super class design. This major benefits you by growing the range of your wireless Internet router. This intends you obtain blanket exposure everywhere, and the dead zones are totally eradicated. It helps your router in prolonging the coverage of your home. This exactly indicates you can obtain much more flexible with where you logon the Internet.

[andrewchatergy813-blog]

The DAP-1520 will re-communicate the Wi-Fi association from the uplink switch as an expanded Wi-Fi organize. An SSID and watchword will naturally be created for both the 2.4 GHz and 5 GHz systems. On the off chance that you wish to change these settings, enter the SSID and secret key that you wish to apply to the expanded Wi-Fi arrange). Snap Next to proceed.

[andrewchatergy813-blog]

If there is only one field listed for a particular device then that device uses an Asus router default login without a username. If there is no username or password by default then it will be shown as (blank).  If the device has multiple default logins then the one with greater privileges or system access will be listed.

[andrewchatergy813-blog]

Open your web browser in your computer or in any wireless device. Inurl address bar ofyour browser type http://www.routerlogin.net or http://www.routerlogin.com. Now your login display will be seen, enter your user name and password of the router. Fill username as "admin" and fill "password" in password field. Both username and password are case sensitive.

[andrewchatergy813-blog]

Remove the existing wireless network profile on windows?

Sometimes you need to reconnect to the existing Wi-Fi network when there is a change in password. You can connect the same Wi-Fi network by entering the new or updated password. When there is a change in name of the network, then correctly identify the new name.

There are two different ways by which you can remove the existing wireless network profile

Method 1:

Step1: After turning on your system, click the WI-FI icon present in the lower right corner of the screen.

Step2: Click on the existing network that you wish to remove or forget. Then select the ‘Forget network’ option.

Step3: Now once again click the WIFI icon and connect to the existing WI-FI network by re-entering the correct or updated password.

 Method 2:

Step 1: Open the control panel by clicking the windows key + X.

Step 2: Now click the ‘Network and Internet’ option. Thereafter click the ‘Network and sharing center’ option. And click ‘change adapter settings’ option on the left-hand side.

Step 3: Right-click on the network that you wish to forget or remove and click the ‘connect/disconnect’ option. You will be taken to the WI-FI settings where you will see the existing wireless networks.

Step 4: Click on the network that you wish to remove and forget the network.

Step 5: Connect to the existing network by re-entering the new password.

If you are a Linksys Router user and you forget your password, then you can reach to 192.168.1.1 login by clicking http www.ip-19216801login.com/ and recover your password.

[andrewchatergy813-blog]

The best part about this Belkin router is that it blocks the inappropriate contents automatically in all the devices that are connected to the router. The process of logging in to the routers of Belkin is also not something to worry about. Log in to my Belkin router as mentioned above that logging in to any of the Belkin wireless routers is not something to worry about for someone using it for the first time. The user requires the default login password and username to get started which is provided in the user guide in the box.  After the first login to your router, it is always advised that the initial username and password must be changed for a better network security.