bestblanerblades-blog

[bestblanerblades-blog]

Maintenance suggestions for WEN 6552 13-inch replacement blade

Regular maintenance of your planer blade can serve you the more delicate cuts for a long time. It's your regular duty to keep your planer blades shiny and sharp. The more you maintain your device, the more it will make you happy. So, follow our maintenance tips for WEN 6552 13-inch replacement blade. It will help you to keep your blade running smoothly.

Check for worn blades

The condition of the blades always affects the precision of cuts. So observe the quality of the cut that the planer produces to check the health of the knives. You should remember that dull blades will tear, rather than sever wood fibers. It also provides fuzzy appearances. When dull blades pound on a wood, raised grain will occur. The wood will have varying density. Raised edges will also be produced where the knives have been nicked. WEN 6552 planer blades are reversible and should always be replaced or reversed as a matched set. It is highly recommended that always keep a spare set of blades on hand. You can order the replacement blades from various websites.

Types of planer blades

Both Carbide Tipped knives and High Speed Steel (HSS) knives are used for a wide variety of machines. You don't need to do anything to the blades before you install them. The knives are good enough to go out of the box and perform beautifully. Otherwise, if you want to bring the edge to the next level, you can use a card style sharpener. It will remove any burr that is left from the factory sharpening process and bring the blade to a keen edge. Only a few quick swipes are enough for a new knife.

You may have a question about the difference between carbide and HSS blade. To be frank, the carbide knife will hold an edge as much as ten times longer than steel blades. On the other hand, steel knife will feel sharper than carbide.

Experts said that a good quality HSS blade would hold an edge 3 to 4 times longer than a stock replacement steel blade. The carbide knife is a little more challenging to sharpen instead of the steel blade. But it can be an easier task with the right tools.

That's all for the maintenance of the WEN 6552 13-inch replacement blade, and hopefully, you have gathered some knowledge about the types of planer blades.Visit  http://www.jtex.com/product/wen-6552-13-inch-replacement-3-blade if you are looking for more Information