bigtreetech-blog

[bigtreetech-blog]

BIQU to realize B1, 32 Bit Dual Operation System 3D printer

BIQU has announced the release of a new consumer-grade and desktop-sized FDM 3D printer, BIQU B1. With the super 32 Bit Dual Operation System, the BIQU is designed to be a consumer-friendly 3D printer with a lot of applied features with an affordable price at 267$. Therefore, it has won wide acclaim from engineers, artists, and hobbyists alike.

Specification:

l Printing Size 235 x 235 x 270mm

l Nozzle Quantity 1 PCS

l Layer Thickness 0.1mm — 0.3mm

l Nozzle Diameter Standard 0.4mm

l Printing Accuracy ±0.05mm

l Rated Voltage 100–120V / 200–240V 50 / 60 HZ

l Output Voltage 24V

l Rated Power 270W

l Max Temp of Hot Bed 100℃

l Max Temp of Nozzle 260℃

l OS Compatible Win 7 / Win 10

l Max Printing Speed 100mm/s

l Normal Printing Speed 60mm/s

Mainboard

The mainboard of BIQU B1 is BTT Skr V4.0 with ARM Cortex-M3 CPU. It has a motor driver interface of X, Y, Z, E0, E1. The TMC2225 stepper drivers in this board are powerful, which enables the printing process really silent.There are also great DIY interface of I2C, SPI and WIFI double z-axis. Therefore, BIQU B1 is really easy to operate, which is friendly to the beginners.

Software

BIQU B1 has different connecting methods, which supports data cable, TF card and USB interface. It is compatible with slicing software like Cura, Repetier-Host and Simplify 3D. B1 comes with a recovery printing module, which allows the printer to continue printing after reconnecting the power supply. At the same time, B1 also has a filament exhaustion detection module, which can automatically cut off the power after detecting the filament exhaustion, thereby saving power consumption.

Touchscreen

BIQU provides dual operating system. Both BTT TFT35 V3.0 marlin and touch work modes are available. Customers can switch the operating system with only one click. There are up 15 languages on choice, including English, French, German, Portuguese and etc..

Other features

BIQU B1 has a unique flexible removable super spring steel (SSS) with a soft magnetic patch. Customers can easily remove the printing item after the steel sheet cooling down. There is also a filament sensor to detect the broken material. Once the filament is detected to break, it will automatically stop printing. Four color RGB light on the extruder and 8 colors for the encoder is available. And you change the color with the touch screen. With the cool light, the printing status can be viewed in the dark night. Besides, B1 applies type-C connector on the extruder, both sides can be used, very convenient to operate. All-in-one C connector makes for a very tidy cable setup and easy replacement of extruder. It also supports BL touch interface connector, customers can easily do some DIY improvement they need.

#biqu #3dprinting #3dprinter #3dprint