Posting and sharing anything bitchsuit! No matter if lovely latex suits or plastic wrap.
Don't wanna be here? Send us removal request.
Statistics
We looked inside some of the posts by bitchsuits and here's what we found interesting.
Average Info
Notes Per Post
10K
Likes Per Post
8K
Reblog Per Post
2K
Reply Per Post
39
Time Between Posts
4 days
Number of Posts By Type
Text
17
Last Seen Tumblr Blogs
Fun Fact
There were a total of 171.5 billion posts on Tumblr in 2019.
Text
Silicone Bitchsuit by SMITIZEN, reviewed!
SMITIZEN a couple weeks back released their silicone Bitchsuit and have sent me one for review!
The suit is available in only a single size but there is an option to have either hard or soft silicone. The harder silicone does not stretch as much as the soft, which means if you are much larger than the measurements of the suit, you will struggle to get into the hard option. The soft is a lot more stretchy and thus allows for larger, be that taller or wider individuals to get into it.
Here are some rough measurements to give you an idea of the mould size used to create the suit.
Smitizen has sent me the soft silicone option to review as I am slightly wider than the mould. I would guess that the mould is based on 5'10-6ft tall slim build going off the measurements and my experience of being in the suit.
As for the suit, here is me in it. Sorry my photos are not great, unfortunately I don't have the space or a partner to help at the moment. But don't worry, I have had a good amount of time in the suit and have gathered enough feedback from other users of the suit to give you some good info and my thoughts. Note that the hood is a latex hood from AliExpress and not from Smitizen. I do plan on getting one of their hoods soon!
The suit is about 10KG in weight. The silicone is nice and thick all the way around though there are a couple thinner parts. It is quite hard to put on at first but you get used to it and work out a good way in.
For me, I stood up and placed both feet down into the suit where the feet go. There are some nice pockets for your feet to go in. I then pull up the suit so my legs are as far in as possible and the silicone is resting on my knees. I then kneel down and pull the silicone over my needs and get each knee into position.
As you can see, the knee positions are nicely moulded. The thickness is about 1" I would guess. This is loads of padding and makes stomping around on hard surfaces really nice. It is better than the foam pads in my red latex suit I reviewed a couple years ago. Once my knees are in, I them pull up the suit above my chest and get my arms in. Unfortunately I don't have anyone to help me past this but then once your arms are in, get someone to zip up the rear zipper and well now you are locked it!
The zipper is of good quality and closes quite nicely. The zipper is impregnated with rubber which is then glued to the suit and stitched along the zipper from top to bottom.
Once in the suit, it is really good fun to walk around in. The silicone thickness on the knees and elbows really does make this a nice experience and there was no slipping around like with the foam from the red latex suit.
As you can see, there is a slight amount of bunching up. I would say that because I am not fully zipped up, and slightly shorter than the mould, this will happen. With silicone moulds, you get one size unless if you make multiple moulds. So if you are on the shorter side, you will get this sort of bunching up of the material. Smitizen does sell as an option with this suit some leather straps. These might be useful if you are on the shorter side and need the suit to fit a bit more snug so you don't move around too much.
As for the experience inside of the suit. I can't imagine not using this without AC or living in a cold climate. As many have said, these suits trap not only sweat in but also the heat. With the 0.4-1mm latex suits, you get some heat coming off you so it is not too bad but with nearly 1cm thick silicone, you are keeping the heat in! Don't take this as a negative to not buy the suit, just be prepared and don't overdo it. Drink plenty of water, keep the room cold etc and you will be fine. So far the limiting factor for me being in this suit is the heat. I could probably last longer in the Bitchsuit position vs my Latex suits, of which I can manage about 4 hours in.
Like I said, stomping around with the silicone knee/elbows is really good. I have never felt more comfortable while in a Bitchsuit. The material against your body feels really nice and while hot, does not rub or slip. Due to the silicone, at least in my soft version of the suit being soft, you are able to move around more inside of the suit. This means you don't get as much cramp in the arms and legs vs a tighter fitting latex suit. The harder silicon version is probably more restrictive in this area. I do hope to get to try a hard version one day. I think it would be more fun for restrictive play vs the freedom of the softer silicone version.
The feet are positioned really well and don't feet tight against the material. One of the issues with the latex suits is the toes having a lot of pressure on them. It makes it harder to stay in longer when you have this pressure but there is none in this suit even when your feet fully fit the area for them.
When moving around, you can hear the silicone slop around. Because it is so heavy, it really does make a nice sound. You can have a listen to this video by @melkiov to get an idea.
Photo by https://x.com/sam_rubber
The style of the suit really suits the drone style Bitchsuit experience. Paired with a drone hood, of the same material, it really comes together! That is not to say you have to have a drone style hood. I have seen people with those Neoprene hoods, and myself use my latex hood, at least until I get a silicone one.
There is an included tail moulded into the silicone and right below it is a rear hole. I was not aware of this hole until I received my suit. I do wish that this was an option rather than just included. When getting into the suit, it sticks to your body when there is no air inside and this hole provides a way for air to get in and out. Which means you can't push all the air out to get it to fully stick when zipped up. Some might prefer that though obviously the target market for this suit will prefer the rear hole...
There is no front hole on the suit. Just thick silicone. You can smack the front area pretty hard and not feel a thing! This again enforces that this is really a drone style suit, made for the wearer to be used as an object and have no pleasure. I don't think you could even rub up against anything in this suit and feel enough stimulation to orgasm unless if you are really turned on or have some sort of stimulating device installed.
The neck length of the suit does not look very long on the photos on the store page, in fact it looks like there is no neck but there is. It is about 3-4cm. It would be nice to have it longer so the hoods sit over it. I don't have one of their silicone hoods to test with but the photos I have seen of other users does show them using collars to hide what I think might be a gap. If the neck was 6-8cm long, this would resolve this.
The bottom of the knees and elbows have moulded paw prints in pink. These add a bit of thickness to the bottom of the legs. Again, there are no options to not have these or not have them in a different colour, just going off the website. I would guess that you could contact Smitizen and get these as an option?
Photo by https://x.com/sam_rubber
I did have a couple issues with my suit. I found after the first use that there was a pinhole in the back and a bit of the silicone fell out. This is on the inside of the suit. The zip at the bottom also came away where it was glued. The zip is sewn in along the zip line but not at the bottom. So take care when zipping it to not pull too hard.
There are also some patches where the silicone has not mixed fully or has cured incorrectly resulting in some marks on the outside of the suit. Not sure if I was just unlucky or this is standard with silicone products. The pinhole that was found does have some marks around it so I am wondering if that was the cause of the hole. My play area was fully cleaned so it is not like there was anything sharp on my plastic floor.
Handling and cleaning the suit is a little tricky. Being 10KG and when you pick it up, flaps around a lot and is quite awkward to move around. You will sweat a lot in this suit so cleaning is a must. Storing and transporting is a bit trickly as well. You are going to want a sturdy box with handles.
Photo by https://x.com/sam_rubber
Overall, I am really happy with the suit! It has been my favourite so far and an really treat to be in. I think it geared towards people who are into drone style Bitchsuits or want to be used as an object with one of their silicone hoods. With some slights modifications or options if they end up offering them, this can also be used as a general Bitchsuit that is just more comfortable to move around with over Latex suits. The heat can be dealt with by AC or not using it in a warm enviroment.
I think this is going to be a very popular option going forward and I have seen a lot of people interested in the silicone Bitchsuit on X and FetLife over the past couple months. I expect to start seeing these in use at conventions and in videos real soon as they are so much fun. I would finish by saying that I would like to see some options at least listed on the website when it comes to the rear hole, maybe offer a front hole and colour options?
A smaller size for shorter people would be good as well. I think the current suit is more leaning to the average male than female so the length of the arms, legs and torso are a tad longer. Maybe a slightly shorter mould would also be popular, I know I would get one if that was an option.
If you would like to get your own Smitizen Silicone Bitchsuit, please order it via the link below. It helps me make these reviews and keep the social media going.
https://www.smitizen.com/product/silicone-puppy-gimp-suit?ref=jacktlv
Many thanks to Smitizen for providing me with a suit to review. They were great to work with and I plan on buying some of their hoods to go with my suit very soon!
If you are on X/Twitter, don't forget to follow me there. @BitchSuitBDSM
If you are on FetLife, we have a Bitchsuit group here for you to join, https://fetlife.com/groups/93094
166 notes
·
View notes
Text
Silicone Bitchsuit by SMITIZEN, reviewed!
SMITIZEN a couple weeks back released their silicone Bitchsuit and have sent me one for review!
The suit is available in only a single size but there is an option to have either hard or soft silicone. The harder silicone does not stretch as much as the soft, which means if you are much larger than the measurements of the suit, you will struggle to get into the hard option. The soft is a lot more stretchy and thus allows for larger, be that taller or wider individuals to get into it.
Here are some rough measurements to give you an idea of the mould size used to create the suit.
Smitizen has sent me the soft silicone option to review as I am slightly wider than the mould. I would guess that the mould is based on 5'10-6ft tall slim build going off the measurements and my experience of being in the suit.
As for the suit, here is me in it. Sorry my photos are not great, unfortunately I don't have the space or a partner to help at the moment. But don't worry, I have had a good amount of time in the suit and have gathered enough feedback from other users of the suit to give you some good info and my thoughts. Note that the hood is a latex hood from AliExpress and not from Smitizen. I do plan on getting one of their hoods soon!
The suit is about 10KG in weight. The silicone is nice and thick all the way around though there are a couple thinner parts. It is quite hard to put on at first but you get used to it and work out a good way in.
For me, I stood up and placed both feet down into the suit where the feet go. There are some nice pockets for your feet to go in. I then pull up the suit so my legs are as far in as possible and the silicone is resting on my knees. I then kneel down and pull the silicone over my needs and get each knee into position.
As you can see, the knee positions are nicely moulded. The thickness is about 1" I would guess. This is loads of padding and makes stomping around on hard surfaces really nice. It is better than the foam pads in my red latex suit I reviewed a couple years ago. Once my knees are in, I them pull up the suit above my chest and get my arms in. Unfortunately I don't have anyone to help me past this but then once your arms are in, get someone to zip up the rear zipper and well now you are locked it!
The zipper is of good quality and closes quite nicely. The zipper is impregnated with rubber which is then glued to the suit and stitched along the zipper from top to bottom.
Once in the suit, it is really good fun to walk around in. The silicone thickness on the knees and elbows really does make this a nice experience and there was no slipping around like with the foam from the red latex suit.
As you can see, there is a slight amount of bunching up. I would say that because I am not fully zipped up, and slightly shorter than the mould, this will happen. With silicone moulds, you get one size unless if you make multiple moulds. So if you are on the shorter side, you will get this sort of bunching up of the material. Smitizen does sell as an option with this suit some leather straps. These might be useful if you are on the shorter side and need the suit to fit a bit more snug so you don't move around too much.
As for the experience inside of the suit. I can't imagine not using this without AC or living in a cold climate. As many have said, these suits trap not only sweat in but also the heat. With the 0.4-1mm latex suits, you get some heat coming off you so it is not too bad but with nearly 1cm thick silicone, you are keeping the heat in! Don't take this as a negative to not buy the suit, just be prepared and don't overdo it. Drink plenty of water, keep the room cold etc and you will be fine. So far the limiting factor for me being in this suit is the heat. I could probably last longer in the Bitchsuit position vs my Latex suits, of which I can manage about 4 hours in.
Like I said, stomping around with the silicone knee/elbows is really good. I have never felt more comfortable while in a Bitchsuit. The material against your body feels really nice and while hot, does not rub or slip. Due to the silicone, at least in my soft version of the suit being soft, you are able to move around more inside of the suit. This means you don't get as much cramp in the arms and legs vs a tighter fitting latex suit. The harder silicon version is probably more restrictive in this area. I do hope to get to try a hard version one day. I think it would be more fun for restrictive play vs the freedom of the softer silicone version.
The feet are positioned really well and don't feet tight against the material. One of the issues with the latex suits is the toes having a lot of pressure on them. It makes it harder to stay in longer when you have this pressure but there is none in this suit even when your feet fully fit the area for them.
When moving around, you can hear the silicone slop around. Because it is so heavy, it really does make a nice sound. You can have a listen to this video by @melkiov to get an idea.
Photo by https://x.com/sam_rubber
The style of the suit really suits the drone style Bitchsuit experience. Paired with a drone hood, of the same material, it really comes together! That is not to say you have to have a drone style hood. I have seen people with those Neoprene hoods, and myself use my latex hood, at least until I get a silicone one.
There is an included tail moulded into the silicone and right below it is a rear hole. I was not aware of this hole until I received my suit. I do wish that this was an option rather than just included. When getting into the suit, it sticks to your body when there is no air inside and this hole provides a way for air to get in and out. Which means you can't push all the air out to get it to fully stick when zipped up. Some might prefer that though obviously the target market for this suit will prefer the rear hole...
There is no front hole on the suit. Just thick silicone. You can smack the front area pretty hard and not feel a thing! This again enforces that this is really a drone style suit, made for the wearer to be used as an object and have no pleasure. I don't think you could even rub up against anything in this suit and feel enough stimulation to orgasm unless if you are really turned on or have some sort of stimulating device installed.
The neck length of the suit does not look very long on the photos on the store page, in fact it looks like there is no neck but there is. It is about 3-4cm. It would be nice to have it longer so the hoods sit over it. I don't have one of their silicone hoods to test with but the photos I have seen of other users does show them using collars to hide what I think might be a gap. If the neck was 6-8cm long, this would resolve this.
The bottom of the knees and elbows have moulded paw prints in pink. These add a bit of thickness to the bottom of the legs. Again, there are no options to not have these or not have them in a different colour, just going off the website. I would guess that you could contact Smitizen and get these as an option?
Photo by https://x.com/sam_rubber
I did have a couple issues with my suit. I found after the first use that there was a pinhole in the back and a bit of the silicone fell out. This is on the inside of the suit. The zip at the bottom also came away where it was glued. The zip is sewn in along the zip line but not at the bottom. So take care when zipping it to not pull too hard.
There are also some patches where the silicone has not mixed fully or has cured incorrectly resulting in some marks on the outside of the suit. Not sure if I was just unlucky or this is standard with silicone products. The pinhole that was found does have some marks around it so I am wondering if that was the cause of the hole. My play area was fully cleaned so it is not like there was anything sharp on my plastic floor.
Handling and cleaning the suit is a little tricky. Being 10KG and when you pick it up, flaps around a lot and is quite awkward to move around. You will sweat a lot in this suit so cleaning is a must. Storing and transporting is a bit trickly as well. You are going to want a sturdy box with handles.
Photo by https://x.com/sam_rubber
Overall, I am really happy with the suit! It has been my favourite so far and an really treat to be in. I think it geared towards people who are into drone style Bitchsuits or want to be used as an object with one of their silicone hoods. With some slights modifications or options if they end up offering them, this can also be used as a general Bitchsuit that is just more comfortable to move around with over Latex suits. The heat can be dealt with by AC or not using it in a warm enviroment.
I think this is going to be a very popular option going forward and I have seen a lot of people interested in the silicone Bitchsuit on X and FetLife over the past couple months. I expect to start seeing these in use at conventions and in videos real soon as they are so much fun. I would finish by saying that I would like to see some options at least listed on the website when it comes to the rear hole, maybe offer a front hole and colour options?
A smaller size for shorter people would be good as well. I think the current suit is more leaning to the average male than female so the length of the arms, legs and torso are a tad longer. Maybe a slightly shorter mould would also be popular, I know I would get one if that was an option.
If you would like to get your own Smitizen Silicone Bitchsuit, please order it via the link below. It helps me make these reviews and keep the social media going.
https://www.smitizen.com/product/silicone-puppy-gimp-suit?ref=jacktlv
Many thanks to Smitizen for providing me with a suit to review. They were great to work with and I plan on buying some of their hoods to go with my suit very soon!
If you are on X/Twitter, don't forget to follow me there. @BitchSuitBDSM
If you are on FetLife, we have a Bitchsuit group here for you to join, https://fetlife.com/groups/93094
166 notes
·
View notes
Text
Silicone Bitchsuit by SMITIZEN, reviewed!
SMITIZEN a couple weeks back released their silicone Bitchsuit and have sent me one for review!
The suit is available in only a single size but there is an option to have either hard or soft silicone. The harder silicone does not stretch as much as the soft, which means if you are much larger than the measurements of the suit, you will struggle to get into the hard option. The soft is a lot more stretchy and thus allows for larger, be that taller or wider individuals to get into it.
Here are some rough measurements to give you an idea of the mould size used to create the suit.
Smitizen has sent me the soft silicone option to review as I am slightly wider than the mould. I would guess that the mould is based on 5'10-6ft tall slim build going off the measurements and my experience of being in the suit.
As for the suit, here is me in it. Sorry my photos are not great, unfortunately I don't have the space or a partner to help at the moment. But don't worry, I have had a good amount of time in the suit and have gathered enough feedback from other users of the suit to give you some good info and my thoughts. Note that the hood is a latex hood from AliExpress and not from Smitizen. I do plan on getting one of their hoods soon!
The suit is about 10KG in weight. The silicone is nice and thick all the way around though there are a couple thinner parts. It is quite hard to put on at first but you get used to it and work out a good way in.
For me, I stood up and placed both feet down into the suit where the feet go. There are some nice pockets for your feet to go in. I then pull up the suit so my legs are as far in as possible and the silicone is resting on my knees. I then kneel down and pull the silicone over my needs and get each knee into position.
As you can see, the knee positions are nicely moulded. The thickness is about 1" I would guess. This is loads of padding and makes stomping around on hard surfaces really nice. It is better than the foam pads in my red latex suit I reviewed a couple years ago. Once my knees are in, I them pull up the suit above my chest and get my arms in. Unfortunately I don't have anyone to help me past this but then once your arms are in, get someone to zip up the rear zipper and well now you are locked it!
The zipper is of good quality and closes quite nicely. The zipper is impregnated with rubber which is then glued to the suit and stitched along the zipper from top to bottom.
Once in the suit, it is really good fun to walk around in. The silicone thickness on the knees and elbows really does make this a nice experience and there was no slipping around like with the foam from the red latex suit.
As you can see, there is a slight amount of bunching up. I would say that because I am not fully zipped up, and slightly shorter than the mould, this will happen. With silicone moulds, you get one size unless if you make multiple moulds. So if you are on the shorter side, you will get this sort of bunching up of the material. Smitizen does sell as an option with this suit some leather straps. These might be useful if you are on the shorter side and need the suit to fit a bit more snug so you don't move around too much.
As for the experience inside of the suit. I can't imagine not using this without AC or living in a cold climate. As many have said, these suits trap not only sweat in but also the heat. With the 0.4-1mm latex suits, you get some heat coming off you so it is not too bad but with nearly 1cm thick silicone, you are keeping the heat in! Don't take this as a negative to not buy the suit, just be prepared and don't overdo it. Drink plenty of water, keep the room cold etc and you will be fine. So far the limiting factor for me being in this suit is the heat. I could probably last longer in the Bitchsuit position vs my Latex suits, of which I can manage about 4 hours in.
Like I said, stomping around with the silicone knee/elbows is really good. I have never felt more comfortable while in a Bitchsuit. The material against your body feels really nice and while hot, does not rub or slip. Due to the silicone, at least in my soft version of the suit being soft, you are able to move around more inside of the suit. This means you don't get as much cramp in the arms and legs vs a tighter fitting latex suit. The harder silicon version is probably more restrictive in this area. I do hope to get to try a hard version one day. I think it would be more fun for restrictive play vs the freedom of the softer silicone version.
The feet are positioned really well and don't feet tight against the material. One of the issues with the latex suits is the toes having a lot of pressure on them. It makes it harder to stay in longer when you have this pressure but there is none in this suit even when your feet fully fit the area for them.
When moving around, you can hear the silicone slop around. Because it is so heavy, it really does make a nice sound. You can have a listen to this video by @melkiov to get an idea.
Photo by https://x.com/sam_rubber
The style of the suit really suits the drone style Bitchsuit experience. Paired with a drone hood, of the same material, it really comes together! That is not to say you have to have a drone style hood. I have seen people with those Neoprene hoods, and myself use my latex hood, at least until I get a silicone one.
There is an included tail moulded into the silicone and right below it is a rear hole. I was not aware of this hole until I received my suit. I do wish that this was an option rather than just included. When getting into the suit, it sticks to your body when there is no air inside and this hole provides a way for air to get in and out. Which means you can't push all the air out to get it to fully stick when zipped up. Some might prefer that though obviously the target market for this suit will prefer the rear hole...
There is no front hole on the suit. Just thick silicone. You can smack the front area pretty hard and not feel a thing! This again enforces that this is really a drone style suit, made for the wearer to be used as an object and have no pleasure. I don't think you could even rub up against anything in this suit and feel enough stimulation to orgasm unless if you are really turned on or have some sort of stimulating device installed.
The neck length of the suit does not look very long on the photos on the store page, in fact it looks like there is no neck but there is. It is about 3-4cm. It would be nice to have it longer so the hoods sit over it. I don't have one of their silicone hoods to test with but the photos I have seen of other users does show them using collars to hide what I think might be a gap. If the neck was 6-8cm long, this would resolve this.
The bottom of the knees and elbows have moulded paw prints in pink. These add a bit of thickness to the bottom of the legs. Again, there are no options to not have these or not have them in a different colour, just going off the website. I would guess that you could contact Smitizen and get these as an option?
Photo by https://x.com/sam_rubber
I did have a couple issues with my suit. I found after the first use that there was a pinhole in the back and a bit of the silicone fell out. This is on the inside of the suit. The zip at the bottom also came away where it was glued. The zip is sewn in along the zip line but not at the bottom. So take care when zipping it to not pull too hard.
There are also some patches where the silicone has not mixed fully or has cured incorrectly resulting in some marks on the outside of the suit. Not sure if I was just unlucky or this is standard with silicone products. The pinhole that was found does have some marks around it so I am wondering if that was the cause of the hole. My play area was fully cleaned so it is not like there was anything sharp on my plastic floor.
Handling and cleaning the suit is a little tricky. Being 10KG and when you pick it up, flaps around a lot and is quite awkward to move around. You will sweat a lot in this suit so cleaning is a must. Storing and transporting is a bit trickly as well. You are going to want a sturdy box with handles.
Photo by https://x.com/sam_rubber
Overall, I am really happy with the suit! It has been my favourite so far and an really treat to be in. I think it geared towards people who are into drone style Bitchsuits or want to be used as an object with one of their silicone hoods. With some slights modifications or options if they end up offering them, this can also be used as a general Bitchsuit that is just more comfortable to move around with over Latex suits. The heat can be dealt with by AC or not using it in a warm enviroment.
I think this is going to be a very popular option going forward and I have seen a lot of people interested in the silicone Bitchsuit on X and FetLife over the past couple months. I expect to start seeing these in use at conventions and in videos real soon as they are so much fun. I would finish by saying that I would like to see some options at least listed on the website when it comes to the rear hole, maybe offer a front hole and colour options?
A smaller size for shorter people would be good as well. I think the current suit is more leaning to the average male than female so the length of the arms, legs and torso are a tad longer. Maybe a slightly shorter mould would also be popular, I know I would get one if that was an option.
If you would like to get your own Smitizen Silicone Bitchsuit, please order it via the link below. It helps me make these reviews and keep the social media going.
https://www.smitizen.com/product/silicone-puppy-gimp-suit?ref=jacktlv
Many thanks to Smitizen for providing me with a suit to review. They were great to work with and I plan on buying some of their hoods to go with my suit very soon!
If you are on X/Twitter, don't forget to follow me there. @BitchSuitBDSM
If you are on FetLife, we have a Bitchsuit group here for you to join, https://fetlife.com/groups/93094
166 notes
·
View notes
Text
Silicone Bitchsuit by SMITIZEN, reviewed!
SMITIZEN a couple weeks back released their silicone Bitchsuit and have sent me one for review!
The suit is available in only a single size but there is an option to have either hard or soft silicone. The harder silicone does not stretch as much as the soft, which means if you are much larger than the measurements of the suit, you will struggle to get into the hard option. The soft is a lot more stretchy and thus allows for larger, be that taller or wider individuals to get into it.
Here are some rough measurements to give you an idea of the mould size used to create the suit.
Smitizen has sent me the soft silicone option to review as I am slightly wider than the mould. I would guess that the mould is based on 5'10-6ft tall slim build going off the measurements and my experience of being in the suit.
As for the suit, here is me in it. Sorry my photos are not great, unfortunately I don't have the space or a partner to help at the moment. But don't worry, I have had a good amount of time in the suit and have gathered enough feedback from other users of the suit to give you some good info and my thoughts. Note that the hood is a latex hood from AliExpress and not from Smitizen. I do plan on getting one of their hoods soon!
The suit is about 10KG in weight. The silicone is nice and thick all the way around though there are a couple thinner parts. It is quite hard to put on at first but you get used to it and work out a good way in.
For me, I stood up and placed both feet down into the suit where the feet go. There are some nice pockets for your feet to go in. I then pull up the suit so my legs are as far in as possible and the silicone is resting on my knees. I then kneel down and pull the silicone over my needs and get each knee into position.
As you can see, the knee positions are nicely moulded. The thickness is about 1" I would guess. This is loads of padding and makes stomping around on hard surfaces really nice. It is better than the foam pads in my red latex suit I reviewed a couple years ago. Once my knees are in, I them pull up the suit above my chest and get my arms in. Unfortunately I don't have anyone to help me past this but then once your arms are in, get someone to zip up the rear zipper and well now you are locked it!
The zipper is of good quality and closes quite nicely. The zipper is impregnated with rubber which is then glued to the suit and stitched along the zipper from top to bottom.
Once in the suit, it is really good fun to walk around in. The silicone thickness on the knees and elbows really does make this a nice experience and there was no slipping around like with the foam from the red latex suit.
As you can see, there is a slight amount of bunching up. I would say that because I am not fully zipped up, and slightly shorter than the mould, this will happen. With silicone moulds, you get one size unless if you make multiple moulds. So if you are on the shorter side, you will get this sort of bunching up of the material. Smitizen does sell as an option with this suit some leather straps. These might be useful if you are on the shorter side and need the suit to fit a bit more snug so you don't move around too much.
As for the experience inside of the suit. I can't imagine not using this without AC or living in a cold climate. As many have said, these suits trap not only sweat in but also the heat. With the 0.4-1mm latex suits, you get some heat coming off you so it is not too bad but with nearly 1cm thick silicone, you are keeping the heat in! Don't take this as a negative to not buy the suit, just be prepared and don't overdo it. Drink plenty of water, keep the room cold etc and you will be fine. So far the limiting factor for me being in this suit is the heat. I could probably last longer in the Bitchsuit position vs my Latex suits, of which I can manage about 4 hours in.
Like I said, stomping around with the silicone knee/elbows is really good. I have never felt more comfortable while in a Bitchsuit. The material against your body feels really nice and while hot, does not rub or slip. Due to the silicone, at least in my soft version of the suit being soft, you are able to move around more inside of the suit. This means you don't get as much cramp in the arms and legs vs a tighter fitting latex suit. The harder silicon version is probably more restrictive in this area. I do hope to get to try a hard version one day. I think it would be more fun for restrictive play vs the freedom of the softer silicone version.
The feet are positioned really well and don't feet tight against the material. One of the issues with the latex suits is the toes having a lot of pressure on them. It makes it harder to stay in longer when you have this pressure but there is none in this suit even when your feet fully fit the area for them.
When moving around, you can hear the silicone slop around. Because it is so heavy, it really does make a nice sound. You can have a listen to this video by @melkiov to get an idea.
Photo by https://x.com/sam_rubber
The style of the suit really suits the drone style Bitchsuit experience. Paired with a drone hood, of the same material, it really comes together! That is not to say you have to have a drone style hood. I have seen people with those Neoprene hoods, and myself use my latex hood, at least until I get a silicone one.
There is an included tail moulded into the silicone and right below it is a rear hole. I was not aware of this hole until I received my suit. I do wish that this was an option rather than just included. When getting into the suit, it sticks to your body when there is no air inside and this hole provides a way for air to get in and out. Which means you can't push all the air out to get it to fully stick when zipped up. Some might prefer that though obviously the target market for this suit will prefer the rear hole...
There is no front hole on the suit. Just thick silicone. You can smack the front area pretty hard and not feel a thing! This again enforces that this is really a drone style suit, made for the wearer to be used as an object and have no pleasure. I don't think you could even rub up against anything in this suit and feel enough stimulation to orgasm unless if you are really turned on or have some sort of stimulating device installed.
The neck length of the suit does not look very long on the photos on the store page, in fact it looks like there is no neck but there is. It is about 3-4cm. It would be nice to have it longer so the hoods sit over it. I don't have one of their silicone hoods to test with but the photos I have seen of other users does show them using collars to hide what I think might be a gap. If the neck was 6-8cm long, this would resolve this.
The bottom of the knees and elbows have moulded paw prints in pink. These add a bit of thickness to the bottom of the legs. Again, there are no options to not have these or not have them in a different colour, just going off the website. I would guess that you could contact Smitizen and get these as an option?
Photo by https://x.com/sam_rubber
I did have a couple issues with my suit. I found after the first use that there was a pinhole in the back and a bit of the silicone fell out. This is on the inside of the suit. The zip at the bottom also came away where it was glued. The zip is sewn in along the zip line but not at the bottom. So take care when zipping it to not pull too hard.
There are also some patches where the silicone has not mixed fully or has cured incorrectly resulting in some marks on the outside of the suit. Not sure if I was just unlucky or this is standard with silicone products. The pinhole that was found does have some marks around it so I am wondering if that was the cause of the hole. My play area was fully cleaned so it is not like there was anything sharp on my plastic floor.
Handling and cleaning the suit is a little tricky. Being 10KG and when you pick it up, flaps around a lot and is quite awkward to move around. You will sweat a lot in this suit so cleaning is a must. Storing and transporting is a bit trickly as well. You are going to want a sturdy box with handles.
Photo by https://x.com/sam_rubber
Overall, I am really happy with the suit! It has been my favourite so far and an really treat to be in. I think it geared towards people who are into drone style Bitchsuits or want to be used as an object with one of their silicone hoods. With some slights modifications or options if they end up offering them, this can also be used as a general Bitchsuit that is just more comfortable to move around with over Latex suits. The heat can be dealt with by AC or not using it in a warm enviroment.
I think this is going to be a very popular option going forward and I have seen a lot of people interested in the silicone Bitchsuit on X and FetLife over the past couple months. I expect to start seeing these in use at conventions and in videos real soon as they are so much fun. I would finish by saying that I would like to see some options at least listed on the website when it comes to the rear hole, maybe offer a front hole and colour options?
A smaller size for shorter people would be good as well. I think the current suit is more leaning to the average male than female so the length of the arms, legs and torso are a tad longer. Maybe a slightly shorter mould would also be popular, I know I would get one if that was an option.
If you would like to get your own Smitizen Silicone Bitchsuit, please order it via the link below. It helps me make these reviews and keep the social media going.
https://www.smitizen.com/product/silicone-puppy-gimp-suit?ref=jacktlv
Many thanks to Smitizen for providing me with a suit to review. They were great to work with and I plan on buying some of their hoods to go with my suit very soon!
If you are on X/Twitter, don't forget to follow me there. @BitchSuitBDSM
If you are on FetLife, we have a Bitchsuit group here for you to join, https://fetlife.com/groups/93094
166 notes
·
View notes
Text
Silicone Bitchsuits are here!
Silicone Bitchsuit now available in either soft or hard silicone, with or without straps and optional hoods! Order it via the link below and get $100 off your Bitchsuit for a limited time!
https://www.smitizen.com/product/silicone-puppy-gimp-suit?ref=jacktlv
You can also pickup some great silicone puppy and drone masks here as well! https://www.smitizen.com/product-category/latex-gloss-silicone-product/hood
532 notes
·
View notes
Text
She just has to walk on her knees and elbows for one minute, one whole minute: that is all her captors require, and she will be free. Several days have passed. She has been fed and watered, has passed waste into the suit several times, but she is no closer or further from her goal than at the start. Trapped in the suit, she cannot see them, but can hear their footfalls and soft laughter at her predicament, taunting her with the promise of freedom. The suit stinks of her own sweat and waste, but she can only scream into the gag in frustration as the noisome mixture of bodily fluids slips and slides between her skin and the thick clinging layer which imprisons her. She does not know that her entire ordeal is being streamed live, with viewers betting on how long she will take to get her freedom, if at all. If she does not get out within a month, she will be given as a gift to the highest donor to the channel.
1K notes
·
View notes
Text
Lock me in this suit all weekend? 🥵
30% off right now, limited time! www.smitizen.com/product/silicone-puppy-gimp-suit?ref=jacktlv
https://www.smitizen.com/product/silicone-puppy-gimp-suit?ref=jacktlv
87 notes
·
View notes
Text
Silicone Bitchsuits are here!
Silicone Bitchsuit now available in either soft or hard silicone, with or without straps and optional hoods! Order it via the link below and get $100 off your Bitchsuit for a limited time!
https://www.smitizen.com/product/silicone-puppy-gimp-suit?ref=jacktlv
You can also pickup some great silicone puppy and drone masks here as well! https://www.smitizen.com/product-category/latex-gloss-silicone-product/hood
532 notes
·
View notes
Text
Silicone Bitchsuits are here!
Silicone Bitchsuit now available in either soft or hard silicone, with or without straps and optional hoods! Order it via the link below and get $100 off your Bitchsuit for a limited time!
https://www.smitizen.com/product/silicone-puppy-gimp-suit?ref=jacktlv
You can also pickup some great silicone puppy and drone masks here as well! https://www.smitizen.com/product-category/latex-gloss-silicone-product/hood
532 notes
·
View notes
Text
2K notes
·
View notes
