blundenmontgomeryblog-blog

[blundenmontgomeryblog-blog]

The Creation of Auto Glass

Auto glass starts out just like all other glass products. It is made from an amorphous solid material that is typically very brittle and optically transparent. Many items are made from this material including windows in homes and offices, drinking vessels, and pretty items used to decorate the home. Almost all items that are created from this substance have the common factor of sand.

Soda lime glass is the most familiar substance used in making the drinking vessels and windows, and even auto glass. The big problem with the sods lime substance is that it is brittle, and when it breaks it breaks into large pieces that can injure people severely. To be used as auto glass the substance needs to be harder to break than the average drinking vessel is. The soda lime substance must be tempered before it can be used as windshields in automobiles, or as doors on commercial properties.

The tempered variety of this soda lime substance is much harder to break than the original version is. With the material in its original state you can easily break it with very little force. Once the material is tempered you can barely break it unless you manage to strike it on the very edge of the piece. The tempering process makes the material stronger and it also makes the material break into small pieces when it does break instead of into large sections. Small pieces cause less damages to humans when they come into contact with them.

In order to temper the material it is gotten hot to the point of melting, and then it is cooled very slowly. This variety of the familiar material is called annealed glass. During this process the strength of the material is made to be ten times what it was originally. The heating and cooling of this material takes place in a leer, which is a type of kiln.

This special kiln is needed to bring the substance to the annealing temperature or annealing point. At this temperature the substance is still too hard to release from its formed shape, but it is soft enough that all of the stresses it contains can relax. Once this point has been reached the item will be allowed to soak up heat until it is an even temperature throughout. Once the heat soaking process is complete the substance is cooled to a temperature that is less than the strain point. Once this temperature has been achieved it is safe for the item to be quickly dropped to room temperature. At this time the piece can be drilled, cut to size, or polished.

Auto glass is http://www.sodalimeglass.com.au/shower-screen-solutions-port-stephens-hunter-valley-hunter-valley.html  put through the annealing processes for the added strength, but mainly for the safety features annealed glass has. When a window in a car is broken it breaks into those tiny little pieces that are less likely to cause deadly injuries. The officials that oversee the production of cars and automobiles require that the safety variety be installed.

[blundenmontgomeryblog-blog]

Where Does Glass Come From?

Imagine living in a world without glass - or even a house without glass? No natural light and no view of the outside without being harshly exposed to the elements as well as letting in all kinds of vermin. - hard to say which one's worse! Glass comes in many different sizes and styles, and has been around since as early as 3500 BC!

Glass provides a hard, durable, and aesthetically pleasing architectural material for structures of all kinds. I think we can all agree that appropriate amounts and placement of glass gives off a "rich" and classy vibe to a building, am I right? But one thing many of us don't know is how glass is made.

So where DOES glass come from?

So how does perfectly smooth and flat sheets of glass of all sizes come to be? You don't really hear of it being mined like metals or oil, and it certainly doesn't grow off trees. So where in the world does this stuff come from? Well, perhaps some of you have been told that it's made from sand - and you're right.

But that's not the only ingredient! I mean, how does grainy, sandy sand turn into perfect, smooth glass? There are many different kinds of glass for many different purposes, but we'll stick to what is called Soda lime glass. About 90% of manufactured glass today is this Soda lime glass, and it's the kind of glass used for window panes, glass containers and beverage bottles etc.

Ingredients used for the production of Soda lime glass include sodium carbonate, lime, dolomite, silicon dioxide, aluminum oxide, and other fining agents in smaller quantities. All these technical names might confuse you but you should know that the chief constituent of sand is silica (silicon dioxide), often in the form of quartz.

Between 70% and 75% of the resulting Soda lime glass is silica, which is probably why sand is the first thing that many people think of when asked what glass is made of. Instead of using the pure chemicals to make glass, manufacturers simply use the cheaper minerals such as sand, which we covered above, and trona, which is the primary source of sodium carbonate.

There are 2 main categories of soda lime glass: windows and containers. Glass used for windows are also called "float glass", named after the process with which it's created. Glass made for containers is made to be more durable against water due to its prolonged http://www.sodalimeglass.com.au/home-window-door-glass-replacement.html  contact with liquids, and therefore has a slightly different and more durable chemical makeup.

You should know that prior to the discovery or invention of the float glass or Pilkington process, there were processes such as crown glass and blown glass, which were the main methods used to produce glass all the way up until the 19th century. These methods had many limitations and imperfections - namely, on size, thickness uniformity, transparency, and flatness.

[blundenmontgomeryblog-blog]

Flint (Leaded) Glass Vs Non-Flint (Soda Lime) EAPG Glass

From the earliest of times, glass has contained lead, the densest of elements, used to give the glass a "ring" to it as well as to increase its' density, allowing the deep and precise cuts of American Brilliant Cut glass and the superior quality for pressed glass patterns.

During the Civil War, much of the available lead was used in the manufacture of munitions, leaving the glass industry to substitute in its place soda lime, a combination of the oxides of sodium, calcium, silicon, aluminum, sulfur, phosphorus magnesium, titanium and iron. The various glass houses of the time each had their own secret formulas, varying the composition of the different oxides to each produce their unique blend of glass.

The first recorded instance of soda lime glass is attributed to William Leighton in 1864.

With the Lead containing glass, the higher the percent of lead, the deeper the tone of the ring of the glass piece, and I might add, the higher the value of the piece. Generally Flint Glass is deemed of higher value, though not always. Another consideration is the design of the piece/pattern.

Two Soda Lime patterns which have a much higher value than any other flint glass pieces are "Jumbo" and Squirrel", both of which have rather intricate designs. (More on these patterns to follow!) Many of the older patterns were made in both the Lead containing Flint Glass and the soda lime glass compositions, such as "Ashburton".

When purchasing a piece of glass determine whether it is lead or soda lime merely by tapping the piece. It also helps to know the name of the pattern/mold and whether it was produced solely in Flint or Soda Lime or both configurations. Be aware that when http://www.sodalimeglass.com.au/glass-shower-door-installers.html  tapping a piece, the inherent shape, such as a the bowl of a goblet, may cause the piece to resonate, but in comparison to flint glass the ring is quite muted. Soda Lime glass moreover does not have the brilliance of the leaded flint glass, but this is a difficult comparison as pieces of both are needed.

[blundenmontgomeryblog-blog]

When Should I Contest a Will?

When a loved one dies, feelings of pain, grief and shock are all common emotions. They can worsen, though, if when the Will is read, it isn't what was expected.

If you suspect the Will is not right, you might want to challenge it. This is known as contesting a Will. Good lawyers, specialised in this area, know how to deal with these cases and can act with discretion and tact. Your main objective should be to achieve a result quickly, without argument or destruction of relationships within the family circle. And, if possible, you want to do this avoiding Court. Whilst a lawyer deals with facts, not emotions, he or she can advise and offer guidance with the procedure.

Why contest a Will?

English Law sets what is called 'testamentary freedom' (the ability to write a Will benefiting any person you wish). However, occasionally injustices occur that can only be rectified by contesting the Will. Most cases are resolved without the need to go to Court. However, when someone has been overlooked and/or the Will affects their life with a big impact (like dependent, under aged children) it is worth consulting a lawyer.

Am I eligible to contest the Will?

A solicitor can help you determine if you have grounds for contesting a Will. Roughly speaking, the Inheritance (Provision for Family & Dependants) Act 1975 allows for a wide variety of people to contest a Will. These could be spouses, children - including adult children, former spouses and dependents of the person who died.

What is the cost?

There are occasions when the stress of making an inheritance claim just isn't worth it. If the process becomes too lengthy due to the case not being very strong, you could end up paying more than the outcome was worth.

Many solicitors offer a free initial consultation after which they will give you a fee quote based on the work required. But don't just shop around on price. Contesting a will is an area of law that is very specialist, so you should always consult a solicitor who is also https://www.blundenmontgomery.com.au/real-estate-deed-transfer-of-property/ specialist in the area - or you might regret it at a later stage. As with most things that fall into the legal sphere, contesting a Will should be conducted with time and care.

Give thought to this process; a potent mix of emotions can make anyone take the wrong or rushed decision.

[blundenmontgomeryblog-blog]

Going To Contest A Will? How To Choose Your Solicitor

Choosing to contest a will is a big decision. Not only can it be an emotionally exhaustive process, but it also falls into a complicated area of law. For this reason, it can often be a good idea to hire a solicitor to act on your behalf during proceedings, especially if your case goes all the way to court. They'll be able to advise you on what to do and help take care of everything for you. If you're looking to choose a solicitor to help you disputing a will, there are a few points you should consider.

Firstly, you need to know why you want to hire a solicitor. For example, do you want to contest the provision of the will or just the way the administration of the estate has been handled? Depending on your precise requirements, this may affect your choice of solicitor. You should also think carefully about your situation before going ahead with disputing a will: do you really believe you might be successful? It is sometimes beneficial to do some research about Wills before you begin any action to see if you are able to dispute it. If you think you are, this is the time to start thinking about hiring a lawyer.

After this you should try to take on a solicitor who is experienced in this type of law. Unless you already know a solicitor specialising in helping people contest a will, doing some research online is probably the right place to start looking for that expert. In fact it's such a specialist area, that you might find no local solicitors are specialist enough - so you might decide to instruct a forward thinking specialist solicitor at a distance, dealing with your case by e-mail and telephone. Choosing the right legal advice at the beginning is very important - this should mean that they are aware of the legal requirements surrounding Wills and have relevant expertise. When choosing your solicitor, you also need to make sure that you are comfortable working with them. Seeing a solicitor for an initial consultation might give you some insight into how your case will progress.

You need to also https://www.blundenmontgomery.com.au/contesting-a-will-solicitors-liverpool/  be discerning when choosing your solicitor to contest a will: if you find that one solicitor tells you what you want to hear be aware that this is not necessarily faultless advice. This is especially true if every other lawyer you speak to tells you something different. Think about the opinions you receive and use these to make an informed choice.

You should also remember that having a solicitor on board to assist you in disputing a will doesn't necessarily guarantee your success. This highlights the importance of taking on the right solicitor, they will be able to inform you of what the best steps are to take and what your real chances of success are.