clear-clogged-drain-blog - Tumblr blog

clear-clogged-drain-blog · 5 years ago

Text

Heating Service For Hire in Vancouver

Pioneer Plumbing has built a reputation of honesty with our long time returning customers. We’ve found that “doing the right thing” in all aspects of our company has brought us to where we are today, and will continue to guide us into the future. Don’t hesitate to call and ask us any plumbing, heating, ventilation, or gas related questions. Chances are if you have a tricky issue, we can solve it.

We have a few goals for our clients. One is to be available for you. It is very uncommon that when you call us we are unable to make it within the same day. We give our repeat customers priority service so if you’ve used us before and you have an emergency, we are going to do what we need to, to get someone there.

Two is to be upfront and honest. From our quotes to our service techs on site, we don’t like to beat around the bush. We will let you know our concerns, our recommendations, and our opinions on how we would handle each situation as if it were our own residence where the problem occurred. We won’t tell you the job is only a 2 hour repair when we have had situations where it turned into an all day repair.

Three is to stand behind our installations and repairs. With mechanical work, it is very common for jobs to get larger or go sideways as you get into them. If we give you a quote we will stand true to the price, if we complete a job for you and you are unhappy with the finished product, we will come back and make it right. In return, all we ask is that you communicate with our office respectfully and honestly so that we can make sure at the end of the day you are happy with our services!

So next time you have a plumbing, heating, cooling, or gas question, repair, or installation you would like quoted, give us a call! Were here to help.

HVAC in Vancouver

Are you currently trying to locate ideas about Natural Gas Furnace?

How One Can Avoid High Heating Repair Expenses

There are a few ways to maintain your furnace system. Odds are, during wintertime months your heater is on all day attempting to keep the home warm. In fact, it is probably on more than it needs to be because it is incapable of maintaining an efficient climate. There are several areas in the heating section to look at when troubleshooting for proficiency.

Replace The Air Filter

This subject is what gets brought up probably the most in discussions about furnace maintenance, but is sometimes disregarded. When there is a obstruction, you either run the chance of not circulating heat appropriately or possibly igniting a fire.When the air filter is dirty air will not flow through either which means the unit must work overtime and will also mean a likelihood of fire. If the system is not distributing heat effectively, it is working harder. The fire concern is obviously self-explanatory. Neither situation is good for your bank account or your well-being..

Try The Blower

Look at the blower blades to ensure they are clean. Should there be any build-up of grime and dust, your fan will need to work harder to blow the air around, and your heating system will be overexerting itself. Meaning that the system is over taxed and costing more money to run.

Fire Damper Function

Next, look at the fire damper to ensure it is running the right way. The fire damper explains itself so pay attention to this component.

The Flex Duct

It is possible that your ducts became damaged over the years for a variety of reasons. If a duct has collapsed or become obstructed, the system will believe that the proper temperature has been achieved, which will not be true. Ultimately your equipment will be straining to maintain your house cool as you continue adjusting the thermostat to get to cozy conditions.

Band Insulation

Insulation is often ignored but is perhaps the most common explanations why an furnace system does not work properly. Take take time to focus on the insulation between the duct work and the exterior to ensure it has not worked itself loose. When this has happened furnace works more than desired while attempting to reach the best temperature.

Ductwork Needs To Be Connected

See that your ductwork has not become separated from other sections. Disconnected ductwork will permit hot air to escape and of course add to the running costs.

Check For Leaks In The Return Air Inlets And Zone Dampers

Ensure that return air intakes are free of the dust and dirt so air can flow easliy. Look at the zone dampers to see if they are in the correct spot. Every so often a damper might get moved in error like when you need to fit by it, or create space for storage. Check to see that the dampers are actually in the right position too.

If that is a tad too much to handle yourself, we propose you hire a local plumbing service certified for furnace and heating repair. You will find a number of heating specialists around you who will care for all of this quite skillfully. For the right results you could set up annual maintenance for furnace and the heating people will call every year to take care of it.

https://www.google.com/maps?cid=16109373416364653742 https://vancouver-plumber.business.site/

https://www.pioneerplumbing.com/

Pioneer Plumbing & Heating Inc

626 Kingsway, Vancouver BC, V5T 3K4 Phone: (604) 872-4946

Business Hours: Sunday Open 24 hours Monday Open 24 hours Tuesday Open 24 hours Wednesday Open 24 hours Thursday Open 24 hours Friday Open 24 hours Saturday Open 24 hours

7 Home Heating System Types

It can be hard to let go of your old heating system and commit to a new one you hardly know. If you have an aging unit that needs replacement, however, it can be exciting to see the variety of heating technologies available as replacement options. All of these systems come in different models and sizes to accommodate your home. Consult a professional HVAC company for more information on installing or replacing a new heating system.

1. Furnace (forced air distribution system)

With a furnace (usually powered with gas), air is forced through a series of ducts. This distributes heated, conditioned air throughout the home. While furnaces can heat the air with electricity, propane, or oil, most U.S. homes utilize natural gas.

Gas furnaces are the most popular type of heating system since the forced air distribution system (ductwork) can be used by your air conditioner during the summer months.

2. Boiler (Radiator distribution system)

Boilers are another common heating system. They send hot water or steam through pipes to provide heating. While this enables you to practice zoned heating and cooling, they are also significantly more expensive to install and cost more money to run.

The reason why furnaces and boilers are known as central heating systems are because the heat is generated in a central area of the home and then distributed throughout the house.

3. Heat Pump

Heat pumps can be used to both heat and cool the home. They use refrigerant and electricity to transfer heat rather than generating it directly like a gas furnace. As a result, they are often much more efficient than other types of heating systems. Unfortunately, they work best in moderate climates where temperatures rarely dip below freezing.

4. Hybrid Heating

Hybrid heating combines the energy efficiency of a heat pump with the power of a gas furnace. Most of the time, the heat pump will operate to heat and cool your home. It is only during extreme temperatures that the furnace kicks on.

And since you aren’t just relying on one system, you will reduce significant strain on both units, thus significantly reducing the need for repairs and replacements.

5. Ductless Mini-Splits

By getting rid of the need for lots of air ducts, mini-split units allow you to create separate HVAC zones, each with a separate thermostat. This is very helpful in larger homes and add-on areas that don’t have ductwork installed.

6. Radiant Heating

Radiant heating sends hot water or electric heat through special tubes located in the floor (and sometimes in the ceiling or walls). The heat can be generated by oil, gas, propane, or electricity.

While the radiant heating distribution system can last a long time, repairs can become very expensive if a problem arises. The lifespan of radiant heat is dependent on its heat source system.

Learn more about the different types of heating systems.

In addition to the type of heating system you install, learn what else should affect your decision-making.

7. Baseboard Heaters

Usually reserved as supplemental heating or heating in an add-on, baseboard heating can be an effective and affordable choice. You have two choices when it comes to baseboard heating: electric or hydronic. Speak with your HVAC contractor for more information on baseboard heaters.

https://www.servicechampions.net/blog/7-home-heating-system-types/

youtube

I came across that blog entry on Licensed Furnace Repair when perusing the internet. Sharing is caring. You won't know, you might be helping someone out. Kudos for your time. Please come visit our site back soon.

youtube

Furnace Cleaning HVAC Service Natural Gas Furnace Heating Repair Service Heating Cooling Repair

Heating Service For Hire in Vancouver

#Heating #HVAC #Heater

0 notes

clear-clogged-drain-blog · 5 years ago

Text

HVAC Service Contractors Near by in Vancouver

So next time you have a plumbing, heating, cooling, or gas question, repair, or installation you would like quoted, give us a call! Were here to help.

HVAC in Vancouver

Just how do you feel with regards to Electric Furnace Repair?

Heating Repair And Regular Maintenance Tips

There are many ways to maintain your furnace system. Odds are, during wintertime months your heater is on throughout the day attempting to keep the house warm. In fact, it is usually on more than it needs to be because it is unable to maintain an operable climate. When troubleshooting and optimizing the heating portion of your furnace system, there are several things to consider.

Change The Air Filter

This subject is what gets talked about the most in talks about furnace maintenance, but is sometimes overlooked. When there is a blockage, you either run the risk of not circulating heat adequately or possibly starting a fire.When the air conditioner filter gets dirty air will not flow through either which suggests the furnace must work overtime and could also mean a likelihood of fire. When the system works overtime, it is more expensive to run. You want eliminate any likelihood of fire. Neither circumstance is good for the pocket book or your well-being..

Try The Blower

Check the blower blades and clean them. A messy fan will work overtime to blow air around and naturally use more energy to preserve the thermostat level you set it at. This implies strain in your furnace system and your wallet since more energy is required to constantly run the blower.

Fire Damper Function

Next, look at the fire damper to make sure it is running the right way. The fire damper is self-explanatory so take note of this aspect.

Look For Holes In The Flex Duct

It is feasible that your ducts have become damaged throughout the years for a variety of reasons. If there are obstructions or the duct has flattened anywhere the furnace system will think the correct temperature has been reached, which can be wrong. Ultimately your equipment will be straining to keep your home cool as you keep on lowering the thermostat to reach cozy settings.

Band Insulation

It is easy to overlook the insulation, but is one of the most common reason for a system malfunctioning. Be sure to check the insulation and validate it has never become unfastened and prompted gaps between the ductwork and the outside. If this happens, your system will not reach ideal temperatures and will work too much to try and accommodate.

Ductwork Needs To Be Connected

Make sure the ductwork is hooked up everywhere to all sections. Disconnected ductwork will allow warm air to escape and naturally add to the running costs.

Check For Leaks In The Return Air Inlets And Zone Dampers

Be sure to make sure return air intakes are dirt free and in good shape or your system will be unbalanced. Look at the zone dampers to check if they are in the right position. Throughout the year we may change the position of the damper for a lot of reasons (i.e. getting into a tight space or arranging for storage). Check to notice that the dampers are in the correct position too.

If that is a tad too much to handle yourself, we suggest you hire an area plumbing business certified for furnace and heating repair. There will be a number of heating companies around you who can care for this all quite competently. The most sage advice we can offer is to establish yearly upkeep for this appliance.

https://www.google.com/maps?cid=16109373416364653742 https://vancouver-plumber.business.site/

https://www.pioneerplumbing.com/

Pioneer Plumbing & Heating Inc

626 Kingsway, Vancouver BC, V5T 3K4 Phone: (604) 872-4946

Business Hours: Sunday Open 24 hours Monday Open 24 hours Tuesday Open 24 hours Wednesday Open 24 hours Thursday Open 24 hours Friday Open 24 hours Saturday Open 24 hours

Types of Heating Systems

Central Heat

Furnaces

The majority of North American households depend on a central furnace to provide heat. A furnace works by blowing heated air through ducts that deliver the warm air to rooms throughout the house via air registers or grills. This type of heating system is called a ducted warm-air or forced warm-air distribution system. It can be powered by electricity, natural gas, or fuel oil.

Inside a gas- or oil-fired furnace, the fuel is mixed with air and burned. The flames heat a metal heat exchanger where the heat is transferred to air. Air is pushed through the heat exchanger by the “air handler’s” furnace fan and then forced through the ductwork downstream of the heat exchanger. At the furnace, combustion products are vented out of the building through a flue pipe. Older “atmospheric” furnaces vented directly to the atmosphere, and wasted about 30% of the fuel energy just to keep the exhaust hot enough to safely rise through the chimney. Current minimum-efficiency furnaces reduce this waste substantially by using an “inducer” fan to pull the exhaust gases through the heat exchanger and induce draft in the chimney. “Condensing” furnaces are designed to reclaim much of this escaping heat by cooling exhaust gases well below 140°F, where water vapor in the exhaust condenses into water. This is the primary feature of a high-efficiency furnace (or boiler). These typically vent through a sidewall with a plastic pipe.

New furnace standards are currently under development by the U.S. Department of Energy, and are due to be finalized in the spring of 2016. The current furnace standards have not been updated since 1987.

Heating system controls regulate when the various components of the heating system turn on and off. The most important control from your standpoint is the thermostat, which turns the system — or at least the distribution system — on and off to keep you comfortable. A typical forced air system will have a single thermostat. But, there are other internal controls in a heating system, such as “high limit” switches that are part of an invisible but critical set of safety controls.

The best gas furnaces and boilers today have efficiencies over 90%

The efficiency of a fossil-fuel furnace or boiler is a measure of the amount of useful heat produced per unit of input energy (fuel). Combustion efficiency is the simplest measure; it is just the system’s efficiency while it is running. Combustion efficiency is like the miles per gallon your car gets cruising along at 55 miles per hour on the highway.

In the U.S., furnace efficiency is regulated by minimum AFUE (Annual Fuel Utilization Efficiency). AFUE estimates seasonal efficiency, averaging peak and part-load situations. AFUE accounts for start-up, cool-down, and other operating losses that occur in real operating conditions, and includes an estimate of electricity used by the air handler, inducer fan, and controls. AFUE is like your car mileage between fill-ups, including both highway driving and stop-and-go traffic. The higher the AFUE, the more efficient the furnace or boiler.

Boilers

Boilers are special-purpose water heaters. While furnaces carry heat in warm air, boiler systems distribute the heat in hot water, which gives up heat as it passes through radiators or other devices in rooms throughout the house. The cooler water then returns to the boiler to be reheated. Hot water systems are often called hydronic systems. Residential boilers generally use natural gas or heating oil for fuel.

In steam boilers, which are much less common in homes today, the water is boiled and steam carries heat through the house, condensing to water in the radiators as it cools. Oil and natural gas are commonly used.

Instead of a fan and duct system, a boiler uses a pump to circulate hot water through pipes to radiators. Some hot water systems circulate water through plastic tubing in the floor, a system called radiant floor heating (see “State of the Art Heating”). Important boiler controls include thermostats, aquastats, and valves that regulate circulation and water temperature. Although the cost is not trivial, it is generally much easier to install “zone” thermostats and controls for individual rooms with a hydronic system than with forced air. Some controls are standard features in new boilers, while others can be added on to save energy (see the “Modifications by Heating System Technicians” section on the heating maintenance page).

As with furnaces, condensing gas-fired boilers are relatively common, and significantly more efficient than non-condensing boilers (unless very sophisticated controls are employed). Oil-fired condensing boilers are uncommon in the U.S. for several reasons related to lower latent heat potential, and potential for greater fouling with conventional fuel oil.

Heat Pumps

Heat pumps are just two-way air conditioners (see detailed description in the cooling systems section). During the summer, an air conditioner works by moving heat from the relatively cool indoors to the relatively warm outside. In winter, the heat pump reverses this trick, scavenging heat from the cold outdoors with the help of an electrical system, and discharging that heat inside the house. Almost all heat pumps use forced warm-air delivery systems to move heated air throughout the house.

A ground-source heat pump heats and cools in any climate by exchanging heat with the ground, which has a more constant temperature.

There are two relatively common types of heat pumps. Air-source heat pumps use the outside air as the heat source in winter and heat sink in summer. Ground-source (also called geothermal, GeoExchange, or GX) heat pumps get their heat from underground, where temperatures are more constant year-round. Air-source heat pumps are far more common than ground-source heat pumps because they are cheaper and easier to install. Ground-source heat pumps, however, are much more efficient, and are frequently chosen by consumers who plan to remain in the same house for a long time, or have a strong desire to live more sustainably. How to determine whether a heat pump makes sense in your climate is discussed further under “Fuel Options.”

Whereas an air-source heat pump is installed much like a central air conditioner, ground-source heat pumps require that a “loop” be buried in the ground, usually in long, shallow (3–6' deep) trenches or in one or more vertical boreholes. The particular method used will depend on the experience of the installer, the size of your lot, the subsoil, and the landscape. Alternatively, some systems draw in groundwater and pass it through the heat exchanger instead of using a refrigerant. The groundwater is then returned to the aquifer.

Because electricity in a heat pump is used to move heat rather than to generate it, the heat pump can deliver more energy than it consumes. The ratio of delivered heating energy to consumed energy is called the coefficient of performance, or COP, with typical values ranging from 1.5 to 3.5. This is a “steady-state” measure and not directly comparable to the heating season performance factor (HSPF), a seasonal measure mandated for rating the heating efficiency of air-source heat pumps. Converting between the measures is not straightforward, but ground-source units are generally more efficient than air-source heat pumps.

Direct Heat

Gas-Fired Space Heaters

In some areas, gas-fired direct heating equipment is popular. This includes wall-mounted, free-standing, and floor furnaces, all characterized by their lack of ductwork and relatively small heat output. Because they lack ducts, they are most useful for warming a single room. If heating several rooms is required, either the doors between rooms must be left open or another heating method is necessary. Better models use “sealed combustion air” systems, with pipes installed through the wall to both provide combustion air and carry off the combustion products. These units can provide acceptable performance, particularly for cabins and other buildings where large temperature differences between bedrooms and main rooms are acceptable. The models can be fired with natural gas or propane, and some burn kerosene.

Unvented Gas-Fired Heaters: A Bad Idea

Gas or kerosene space heaters that do not have an exhaust vent have been sold for decades, but we strongly discourage their use for health and safety reasons. Known as “vent-free” gas heating appliances by manufacturers, they include wall-mounted and free-standing heaters as well as open-flame gas fireplaces with ceramic logs that are not actually connected to a chimney. Manufacturers claim that because the products’ combustion efficiency is very high, they are safe for building occupants. However, this claim is only valid if you keep a nearby window open for adequate fresh air— which defeats the purpose of supplemental heat. Dangers include exposure to combustion by-products, as discussed in Ventilation, and oxygen depletion (these heaters must be equipped with oxygen depletion sensors). Because of these hazards, at least five states (California, Minnesota, Massachusetts, Montana, and Alaska) prohibit their use in homes, and many cities in the United States and Canada have banned them as well.

Electric Space Heaters

Portable (plug-in) electric heaters are inexpensive to buy, but costly to use. These resistive heaters include “oil-filled” and “quartz-infrared” heaters. They convert electric current from the wall socket directly into heat, like a toaster or clothes iron. As explained further under “Selecting a New System,” it takes a lot of electricity to deliver the same amount of useful heat that natural gas or oil can provide onsite. A 1,500- watt plug-in heater will use almost the entire capacity of a 15-amp branch circuit; thus, adding much additional load will trip the circuit breaker or blow the fuse. The cost to operate a 1,500-watt unit for an hour is simple to compute: it is 1.5 times your electricity cost in cents per kilowatt-hour. At national average rates—12¢ kWh for electricity— that heater would cost 18¢ per hour to run—and quickly cost more than its purchase price. On the other hand, for intermittent use, it is the “least-bad” solution when alternatives would require major investments to improve ductwork for a specific area, for example. Just remember, electric resistance heat is usually the most expensive form of heat, and it is, therefore, seldom recommended.

“Electric baseboard heat” is yet another kind of resistive heating, similar to a plug-in space heater except that it is hard-wired. It has two principal virtues: the installation cost is low, and it is easy to install individual room thermostats so you can turn down the heat in rooms that aren’t being used. Operating costs, as for all resistive systems, are generally very high, unless the house is “super-insulated.”

Wood-Burning and Pellet Stoves

Wood heating can make a great deal of sense in rural areas if you enjoy stacking wood and stoking the stove or furnace. Wood prices are generally lower than gas, oil, or electricity. If you cut your own wood, the savings can be large. Pollutants from wood burning have been a problem in some parts of the country, causing the U.S. Environmental Protection Agency (EPA) to implement regulations that govern pollution emissions from wood stoves. As a result, new models are quite clean-burning. Pellet stoves offer a number of advantages over wood stoves. They are less polluting than wood stoves and offer users greater convenience, temperature control, and indoor air quality.

Fireplaces

Gas (and most wood) fireplaces are basically part of a room’s décor, providing a warm glow (and a way to dispose of secret documents), but typically not an effective heat source. With customary installations that rely on air drawn from the room into the fireplace for combustion and dilution, the fireplace will generally lose more heat than it provides, because so much warm air is drawn through the unit and must be replaced by cold outside air. On the other hand, if the fireplace is provided with a tight-sealing glass door, a source of outside air, and a good chimney damper, it can provide useful heat.

State of the Art Heating

Radiant floor heat generally refers to systems that circulate warm water in tubes under the floor. This warms the floor, which in turn warms people using the room. It is highly controllable, considered efficient by its advocates, and is expensive to install. It also requires a very experienced system designer and installer, and limits carpet choices and other floor finishes: you don’t want to “blanket” your heat source.

Contact the Radiant Panel Association(link is external)

Ductless, Mini-Split, Multi-Split. Residential ductwork is relatively rare outside North America. “Ductless” heat pumps, which distribute energy through refrigerant lines instead of water or air, are widely used. Large field trials in the Pacific Northwest suggest that they can have good cold weather performance, and be very cost-effective where replacing electric resistance heating. Like ground-source systems, relative immaturity of the market helps assure that whole-house multi-split systems carry premium prices.

Combined heat and power (CHP) or cogeneration for houses is being seriously studied in some countries. The basic premise is to use a small generator to meet some of the electric demand of the house, and recover the waste heat (typically more than 70% of the heating value of the fuel) to heat the house (hydronic or water-to-air systems) and make domestic hot water. These systems are not yet widely available. They are likely to have the best economics in houses with high heating bills because the house cannot be feasibly insulated, such as solid stone or brick homes.

https://smarterhouse.org/heating-systems/types-heating-systems

youtube

As a devoted person who reads on HVAC System Repair, I imagined sharing that excerpt was worthwhile. So long as you enjoyed our post please be sure to pass it around. I value reading our article about Home Furnace Replacement.

youtube

First Rate Heating Repair HVAC Replacement Furnace Repair Service Residential Ac Repair Home HVAC Repair

HVAC Service Contractors Near by in Vancouver

#Heating #HVAC #Heater

1 note · View note