Don't wanna be here? Send us removal request.
Text


DSDN 141 Project 2
Venom.
It is a kind of parasitic phenomenon. I use the plastic and wood to make. The wood could be exist by itself but not the plastic. Firstly i melt a hole in the middle of the plastic and put the wood under the plastic. Then i melt the plastic untill them connection. Finally i used the latex on the plastic to modified appearance.
0 notes
Photo


DSDN 141 For the freedom. This project i main use the wood, metallic line, crayon and heat gun to make. I tried to melt these crayons and make them combine to a new shape. I choosed the blue and red color as symbol the ice and fire. Wire symbolizes a cage.For get the freedom, we need to fight, such as the kinds of reaction between materials.
0 notes
Photo

DSDN 141 The honour. This experiment i used the coke can. Firstly, i cut the part what i need from the can. Secondly, i heat the Aluminum material by using heat gun until it color change. Then i use the nail hammer hit it to make a nice look.
0 notes
Photo

DSDN 141 Mould experiment. This experiment took me 2 weeks to process it and observe. I left some chili powder in a bowl and mix in some water. Then i put the bowl at normal room temperature. After about 1 week later, it became some mould. There are all kinds of microbes everywhere in the natural environment. One species of fungi can form well-developed, branched hyphae called mould.
0 notes
Photo

DSDN 141 Foam snowflakes. I dissolve gold foam with acetone and final got this shape.Because foam is a kind of ethylene material, it is very lively, so it is easy to produce chemical reactions. The acetone chemical formula is CH3COCH3, and at the same time, it can be used as an organic solvent in medicine, paint, plastics, gunpowder, resin, rubber, photographic film and other industries.
0 notes
Photo

DSDN 141 The dagger. I used the wooden(From drying rack)as the pedestal, and then saw it and beat it got the scratch . After it, i used the electronic high temperature gun carved these cross patterns. I found that the burning point of wood is about two hundred degrees centigrade. C+O2=CO2. Then i usd the glue gun bond with the tin sheet to make it looks nice.
0 notes