dttouchgroup-blog

[dttouchgroup-blog]

Efficient Cooling Technologies – EmergyKool, Qatar

A cooling tower is a device used to reduce the temperature of water. The water is then recycled back into the many processes and industries that use it. Some industries use the water to control the temperature (sensible heat), of a process, like a car radiator. The HVAC industry uses the water to condense the refrigerant (latent heat). In the past most of the processes requiring cooling use piped town water through the equipment, cooling the equipment, and then drained the water to the gutter (100% waste). Because Australia is such a dry continent the water supply authorities introduced the Water Conservation Act, which forced all the industries to install cooling towers to recycle the water.

Cooling towers are a very important part of many chemical plants. The primary task of a cooling tower is to reject heat into the atmosphere. They represent a relatively inexpensive and dependable means of removing low-grade heat from cooling water. The make-up water source is used to replenish water lost to evaporation. Hot water from heat exchangers is sent to the cooling tower. The water exits the cooling tower and is sent back to the exchangers or to other units for further cooling.

In today’s highly competitive markets, businesses and institutions must make wise use of available resources. Increasingly the most forward-thinking companies are partnering with local utilities to reduce their demands for energy and water, both to save costs and improve the long-term sustainability of their business. Using highly treated recycled water for non-potable purposes is an effective way to reduce the demand for precious fresh-water resources. It is also a recognized green building practice. Recycled water has been used in industrial settings throughout California and the arid west for nearly 100 years.

In spray nozzle cooling, water is distributed into the inlet air to reduce the inlet air temperature by evaporative cooling prior to reaching the condensers. This increases the overall cycle efficiency and helps the plant recover some of the performance reduction caused by hot ambient temperatures. An effective water spray design needs to avoid non-uniform cooling distribution and incomplete evaporation of droplets. These issues can be avoided and an optimum design can be achieved only if the spray cooling mechanisms under these conditions are well understood. Spray cooling is becoming more popular due to its simplicity, low capital price, and ease of operation and maintenance.

Significant opportunities were identified when the operation and maintenance of the cooling system was analyzed from a water and energy efficiency perspective. EMergyKool decided to address this inefficiency by using variable speed drives on the cooling towers. Installation of variable speed drives allowed the cooling tower fans to operate at their optimal speed, depending on the weather conditions and the degree of cooling required at any given time.

Mechanical Draft, are fitted with fans to improve the airflow through the tower which increases the evaporation rate of the water which increases the capacity of the tower. Mechanical Draft Towers are used just about everywhere including the HVAC industry.

Mist Cooling, Misting Fan, Misting System.

Conclusion: EMergyKool is a leading supplier of Energy Efficient Misting fans which can be used in industries, parks, beaches etc., For more information visit http://qatar.emergykool.com/

[dttouchgroup-blog]

Achieving Green Building Environment – Emergy, Dubai

Green Building, Air Quality, Renewable Energy, Temperature Control

To reduce the rate of growth of energy consumption while enhancing economic development;

To facilitate the growth of the Green Technology industry and enhance its contribution to the national economy;

To increase the capacity for innovation in Green Technology development and enhance competitiveness in Green Technology in the field;

To ensure sustainable development and preserve the environment for future generations, and

To increase public awareness and education on green technology and encourage its widespread use Green Technology.

U.S. Environmental Protection Agency de nest green building, also known as “sustainable” or “high performance” building, as: “... the practice of creating structures and using processes that are environmentally responsible and resource- e client throughout a building’s life-cycle from siting to design, construction, operation, maintenance, renovation and deconstruction. is practice expands and compel- mints the classical building design concerns of economy, utility, durability, and comfort.”

The process of green building begins with clever design. Calculating something as simple as where to place the windows can make a major difference in energy usage. Strategically placed windows can mean fewer hours using electric lighting and less need for heating in the winter. Shading of windows and roofs in the summer can mean less energy use and less pollution from air conditioning. The same can be true of the placement of insulation in walls, ceilings, and floors.

The costs of a home wind generator vary greatly. Some have built their own wind generators with off-the-shelf parts from their local hardware stores. Others have purchased kits or paid for professional installation to supplement the power purchased from their local electrical grid. The power production capability of a home wind generator varies about as much as the initial expense. Many kit based generators will produce only enough power to offset 10-15% of your home energy costs.

Our concern on air pollution has been escalating. Concentrations of pollutants emitted from many of man’s activities arising from urbanization and industrialization thus built up to levels which override those caused by natural phenomena, and are sufficient to have adverse affects on our living environment. Of growing concern is the greenhouse gas emissions which have been identified as the main culprit for global warming and climate change. The greenhouse effect is a phenomenon whereby greenhouse gases create a condition in the upper atmosphere causing a trapping of heat and leading to increased surface and lower troposphere temperatures. Carbon dioxide emissions from combustion of fossil fuels are a main source of greenhouse gas emissions.

Green energy production technology built by engineers mean that homes and other buildings can also be designed to produce their own energy through the use of alternative energy systems like wind turbines and solar panels (photovoltaic systems). These devices are able to convert natural energy sources, like wind or sunlight, into electricity that can be funneled straight to the building’s electrical grid. In fact, some buildings are designed to be so energy efficiency that they actually produce more energy than they use.

Conclusion: EMergy, an experienced leader in Green Technology revolution, contributing to many innovations such as Renewable Energy Technology. For details, visit www.emergy.ae

[dttouchgroup-blog]

Choosing your wedding videographer – DTouch Production

Life is all about the joy and memories. The Wedding is one of the best memories which you can cherish forever. Capturing those moments or filming it will be helpful in making you feel good whenever you look at that. The last 5 years has brought more changes to the wedding videography than anyone had thought possible. Here comes the question in your mind that how should one select his wedding photographer or videographer. Choosing the right videographer is as important as choosing the bride or bridegroom. We have put down the most important factors that matters while choosing the wedding videographer. There are few tips which can help you making your wedding videography a memorable one.

REFERENCES

Get as many references as you possibly can from your friends who are recently married. If you’ve already booked your wedding photographer, they will have great recommendations for videographers they have previously worked with.

VIDEOGRAPHERS WORK

Once you have collected your references, spend some time in checking the work of that videographers in his website or in his official social media accounts and go through the reviews in the accounts.  We strongly recommend you watch three complete wedding films that your videographer has created. Watch through each wedding and think about how they make you feel: if you feel excited, nervous and emotional, it means the videographer has really captivated you and forged an emotional connection. The mark of a good videographer is transporting you to the wedding day through their film!

GET IN TOUCH

If you really like the work of the videographer you can just go to his office and speak with him personally about the wedding. Explain them what you like in their work and get some suggestion from them for your wedding photography. Get to know the equipment’s that they are going to use in your wedding shoot and the amount of time that they need for completing the work.

STYLE OF FILMING

Some videographers will take a documentary stance, where the finished film will show your wedding day as it happens, with interviews from your loved ones dispersed throughout the film. Some prefer the story-telling style, where they weave the different moments from your wedding day into a structured narrative. And some will take a “fly-on-the-wall” attitude and will just film the day as it unfolds and edit it accordingly. Convey your idea precisely to the videographer about your wedding location, time and most important your wedding costume that will really be helpful for them in filming and editing. If you have a song you want included – that one that gives you goose bumps or the one you heard when you first met!

Conclusion

At the end of the day this video will remind you of every moment of your wedding find the perfect person to do it and watch it repeatedly for the rest of life! If you need any videographers in Dubai you can check on www.dtouchproduction.com/videography.php

[dttouchgroup-blog]

Capture the Visitors Focus with Creative Exhibition Stand – DTouch Exhibit – DTouch Group - Dubai

As an exhibitor, you are no doubt aware that exhibitions cost money. The more thoroughly and intensively you prepare for your participation in the exhibition, the greater the benefits will be. For this reason, you should use all instruments at your disposal to their best effect, both prior to the event and afterwards. Press work, together with advertising, is of the utmost importance for sales strategies as well as for the overall and external representation of a company. Please note: press work is an extremely important part of your presence at an exhibition. The best product or the most amazing new idea is wasted if the public or trade visitors do not get to hear about it in good time.

Meeting qualified prospects and ultimately making sales are the reasons for exhibiting in an expo. It is not enough, however, to simply generate leads and sell franchises, a company must set specific goals for leads and sales to achieve. A conservative rule of thumb is to ultimately sell franchises through expos for approximately half the marketing cost of any traditional print ads. Remember that selling is not a simple process, it is rarely accomplished in a single step. Trade shows are used to accelerate that process.

But it’s not enough to simply choose an event and show up, say experts. Attendance doesn’t ensure your company’s success. With careful preplanning and a partnership with show management and the general services contractor, however, the exhibition can help you connect in a powerful way with the most active and motivated buyers in your market – while you skillfully manage the process.

Who’s right? Our feeling is it’s a matter of expectation. As an exhibitor, we approach our encounters with a certain level of expectation. If we expect the encounter to last only three minutes, that’s the mindset we take into it, and our behavior reflects that. On the other hand, an attendee is saying, “You give me a reason to stay and I’ll give you the time.” Who should be right?

The key question to ask when creating your exhibit is, “What is our brand identity, and what do we want our primary visitor to experience, remember and do because of visiting our exhibit?” A thoughtful and well-crafted answer to this question will put you head and shoulders above the competition.

Identity and Branding: Carefully consider the identity and brand message you want to communicate and make sure your exhibit supports both. If you are positioned as leading edge, or fun and easy to work, or solid and stable, then make sure your exhibit design supports this identity. Work closely with your exhibit designer to select exhibit construction materials, shapes, and colors that support your identity.

Make sure everything in your booth walks the talk. When an attendee looks at your exhibit, they must be able to understand who you are and what you do IMMEDIATELY – within just a few short seconds. If you insist on making them figure it out … well, they simply won’t take the time. They just walk away. There are plenty of other exhibitors for them to focus on!

Conclusion: DTouch Group is a one stop shop for all you advertising and Exhibition needs. For creative and unique exhibition stands, visit http://dtouchgroup.com/

[dttouchgroup-blog]

Elevate Your Business by Exhibiting – DTouch Exhibit – Dubai, UAE

The bridge between missions and actual exhibitions is generally an exhibition plan. Most museums have five-year exhibition plans. Some, especially those with plans for major reinstallation of permanent exhibitions, project 10 years out. The 5-10-year timeframe is partly because of the lead-time required to develop and fund projects. The plans are, however, flexible enough to allow for both serendipity and a response to unanticipated events.

Trade shows could not be underestimated as important marketing tools that were able to reach a huge target market at one go. Over the years organized trade shows had provided an even playing field in which small business and large ones came together to determine the trade show effectiveness. The objective of the study was to determine organizations’ views towards effectiveness of trade shows and exhibitions as a marketing tool. The problem statement was that most organizations were operating in budgetary constraints and therefore the need to ensure that their objectives were met became critical.

A business is worth what someone will pay for it. While this may sound obvious, it is important for anyone considering selling their business to understand that purchasers are becoming more and more sophisticated in how they value them. There is an increasing number of acquisition opportunities for purchasers and they expect sellers to be reasonable in their price expectations otherwise they will move on to something that gives them better value for money.

Attendees’ are becoming increasingly dependent upon both information on and their perceptions of fundamental exhibition attributes to make their attendance decisions. In seeking to identify these crucial attributes, various studies have posited not only different types of attributes relevant to the problem of exhibition attendance (which emerge variably depending on the chosen research framework) but also attributes that differ markedly depending on the level of analysis or the research framework chosen.

Comparing statistics from one event to another is a challenging task that may also potentially mislead the reader: many parameters impact the “quality” of an exhibition and the client’ expectations legitimacy varies from one company to another, from one country to another, from one industry sector to another, etc.

·         identify the existing educational programmers used in each country to train exhibition professionals and marketing professionals;

·         define a minimum set of standards to be used to appropriately train exhibition professionals (“exhibition management”) and marketing professionals (“exhibition marketing”).

·         promote the educational programmers supported by UFI and created by recognized organizations and academic institutions.

·         develop new educational programmers.

·         convince business and marketing schools/universities to dedicate more time to teach the power of exhibitions as a marketing and communications tool.

·         cooperate with organizations that have already launched educational courses for exhibition management.

Delegates and/or attendees may view participation in an event, at the event’s venue and the venue’s destination as one decision-making instance, with some attributes being considered more prominently than others. Meeting planners and/or organizers may, however, see each component as a separate step in a multi-level or multi-stage decision process. As discussed above, different studies tend to highlight different significant attributes based on the respondents selected to evaluate the attributes or based on the chosen level of analysis.

Conclusion: DTouchExhibit is a well reputed exhibition stand builder in Dubai. We do provide service in the other cuties of United Arab Emirates. Visit us at the following link www.dtouchexhibit.com

[dttouchgroup-blog]

Cooling at a low cost evaporative cooling – EMergyKool, dubai

The rudimentary basis for understanding any air conditioning, dehumidification and evaporative cooling is psychometrics. Psychometric consists of the interactions between heat, moisture and air. It is basically the study of air-water mixtures and is an essential foundation for understanding, how to change air from one condition to another. As air temperature rises, its capacity to hold moisture rises also; and warmer air becomes less dense. This makes moisture a very influential factor for heat gain, both for comfort and in calculations. The knowledge of systems consisting of dry air and water vapor is essential for the design and analysis of air conditioning devices, cooling towers, and industrial processes requiring close control of the vapor content in air. Air moisture and heat interactions are rather complex; fortunately, these interactions can be combined in a single chart.

Lowered energy consumption, lowered environmental impact. Companies installed the EMergyKool system following a review of its energy requirements for both factory and offices. Their low initial and running costs made them the units of choice. EMergyKool provided the design of a natural and mechanical ventilation system and also supplied a glazed roof.

As evaporative cooling works by removing heat from warm, dry ambient air to evaporate water inside a control volume, the cooling system was placed outside the cold storage room for access to the ambient air. For previous humidity control experiments, a delivery inlet had been placed in one of the walls of the cold room. The inlet’s diameter was a convenient dimension for the delivery pipe of this design, however it was difficult to access because of space restrictions in the antechamber to the cold room.

Consumers have learned that air conditioning uses three to five times as much electricity to cool their homes as evaporative cooling. They know how much their utility bills rise in the summer months. Some have added evaporative cooling for use during the hot, dry summer months and switch to air conditioning during the “monsoon” season.

The use of conventional evaporative cooling has rapidly declined in the United States despite the fact that it has high potential for energy savings in dry climates. Evaporative systems are very competitive in terms of first cost and provide significant reductions in operating energy use, as well as peak-load reduction benefits. Significant market barriers, such as the cost of the prototype evaporative cooling systems and consumer perceptions of evaporative coolers being unable to maintain comfort conditions, still remain and can be addressed through improved systems integration.

The cooling process works on the principle of evaporation of moisture. The fan of the cooler draws outside air through pads soaked with water. The evaporation of the water lowers the temperature of the air passing through the wet pads of the cooler. This cooled air is blown through an opening into the building. The movement of the cooled air is directed by the homeowner by means of ducts to appropriate areas around the home and exhausted from partially opened windows, doors or ceiling ducts.

Conclusion: EMergyKool is a leading supplier of Energy Efficient Evaporative Coolers which can be used in industries, parks, beaches etc., For more information visit www.emergykool.com

[dttouchgroup-blog]

Advantage of Digital Printing – DTouch Print, Dubai

There have been great advances in digital printing and print-on-demand technologies over the last decade. The manufacturers of high-volume digital presses have made huge improvements in print quality, formats, speed, and workflow. Monochrome text printing solutions have evolved to support both monochrome and color book printing and have the ability to customize and personalize all with the speed and quality required by publishers and customers. These developments have changed how publishers assess the life cycle of a book, and they come at a good time. Digital printing was only used “for extending the life of a title in the long tail, now titles are candidates for digital print at almost every stage after the initial lay down. If a bookstore’s initial stocking order is short, additional copies can be produced quickly to meet demand. Because the content setup and transaction costs for digital printing are very low, print costs at every stage of a book’s life cycle are economical.

Bottom of Form

We are seeing both toner and ink-jet technologies utilized in various segment and product combinations, such as memory books, self-publishing, and rapid replenishment during inventory stock outs. To operate most efficiently, POD and print-to-order content and order management should be fully automated. In such a system, publishers, retailers, and distributors receive and process orders that are then passed directly to the printing systems. Turnaround times range from one to four days when all the workflows are in place. When a customer orders several titles from a publisher or distributor, but sales forecasts for some of the titles are unavailable, SRDP can reduce the risks of overstocking. Printers often have good Web interfaces, allowing orders to be placed online if an automated interface isn’t in place. Turnaround times on these orders are typically five to 10 days. With the advances in both color toner and ink-jet printing, titles can be produced whose quality is comparable to that of the original editions, which were made using offset printing. A key reason digital printing is now in the manufacturing mix is that current digital printing platforms have greatly flattened the cost curve across order quantities, and publishers that consider the total cost of ownership are rapidly taking advantage of these technologies. A new paradigm is emerging in which, rather than relying on large print runs, publishers order fewer copies of each title and then replenish their inventory more frequently, without increasing their expenses, thereby reducing inventory risks and conserving cash. And because of automated workflows, smaller publishers and distributors that don’t have large IT infrastructures can take full advantage of digital printing. Placing an order might not be automated, but much of today’s printing is.

All printing process are concerned with two kinds of areas on the final output:

1.     Image Area (printing areas)

2.     Non-image Area (non-printing areas)

Keywords: Business Cards, Brochure Printing, Printing Design

CONCLUSION

As this digital printing is on the booming phase if you would like to know more about this digital printing or want to print anything in Dubai or Abu Dhabi you can just check on  this http://www.dtouchprint.com

[dttouchgroup-blog]

CHALLENGES IN MODELLING INDUSTRY

The modeling industry can be extremely difficult to work. To be a model there is few things which you have to work precisely. While all careers have their pressures, being successful in the world of fashion sometimes comes with strings attached. This industry is competitive and there are so many challenges.

 Posture

A good posture can totally change someone’s look. The posture plays a important role in becoming a successful model. Posture is not just standing straight its more on the body balance. Stand in front of a mirror, with a straight vertical indicator behind you, Look at your reflection carefully. Does your head lean slightly to one side? Are your shoulders even? If not, try to get everything even and see how it feels. Height and lift helps to give a good posture. When it comes to the height its not just stretching your neck or extending your spine. To get a natural lift you have to start with your legs. The foundation should be firm then concentrate on the chest, lungs and then extend your spine as you do. Also make sure that your head is not leaning forward and light on your neck.

 MAKE UP

We all know that good makeup can make you look flawless but a bad makeup can make you look dull. Every model first needs to know how to do their makeup naturally because if you can learn to bring out your natural beauty first then lot of the other stuff is like a piece of cake. If you don't feel comfortable doing your own makeup then find a good makeup artist. Good hair is just as important as makeup. It can also make or break a photo. For example you can have the most amazing wardrobe and the most amazing makeup but if that hair is off the whole image is off so again learn to do your own. Keep your eye brow's shaped and if you dye your hair keep it maintained. There is nothing worse than crazy eyebrow's and some serious roots.

DIET

Diet is plays a important role in models lifestyle. The diet may vary from a person to person based on their body structure and height. It is always good to consult and also have a personal doctor for the diet tips. There are some basic thing which helps you to become a successful model. They are like keeping a healthy lifestyle by drinking a lot of water, work-out regularly, get sufficient sleep and avoid cigarettes and alcohol. Look after your skin and your hair: use skin & hair care products, keep make-up at a minimum, take off your make-up every night and go for a regular trim.

 MODELLING AGENICIES

 Approaching a good Modeling agencies is not only important, it is tough too. There are a number of agencies that cannot give you the required exposure and in return might do more harm than good. Hence, before approaching any agency make sure you have made your researches and approach only such agencies that actually have the experience of launching real models.

 CONCLUSION

DTouchModel is the best place to start you modeling career. With expert guidance and tips, we have helped a lot of young modeling enthusiasts to shape their career. For more information visit

www.dtouchmodel.com