eeintl-blog

[eeintl-blog]

Management consulting

Management consulting helps organizations to improve and develop their plans and performance. In the era of development and technologies, consultancies help companies and organizations a lot to improve their services which lead them to success. Management consulting analyses the problems of organization and recommend them the effective way to come over their problem. Frederick Winslow Taylor startedthe first ever management consultancy in 1893. The first method was organizing work which was used worldwide for many years. In 2013, Lasse Lund won the best performance consultant of the year in Management Consultancies Association’s awards (MCA).

Now-a-days, people are more likely toward management consulting, because it incorporates all the aspects of business management. No matter you are expert in business or not, it always gives you better suggestion and awareness. A lot of small business owners do not have much time to focus on each and every thing which result in loss. There are some important reasons why management consulting is necessary:

Guidance to use your experience at the right time: no matter how experienced you are. If you do not know how and when to use it, you cannot get benefit from it. Management consultant guides you in a right way to use your skills.

Manages team through growth: to run a company with improvement, it is very important to manage the team. If you do not satisfy you employ, you may ruin your reputation by disappointing them. Hiring new staff and make them trained is not easy. Management consulting gives you better ways in this regard.

Profit gaining and time saving strategy: Management consultants also guide the owner how to control costs and improve efficiency. In this way, expenses can be reduced and there is more chance to get profit.

For all the small business and on large scale business, Energy expert Industry (EEI) provides the best consultants to guide customer with every aspect to improve their business.

As the business, increasing worldwide, there is more competition between the companies. Management consulting has become a must thing that one should do before starting a business, whether on small scale or on large scale. From all the above description, Energy Expert Industry (EEI) is the best choice for consulting. EEI (ENERGY EXPERT INDUSTRY) not only guide you personally, but also online facility is available. Energy Expert Industry (EEI) is also known for their best customer service and is highly recommended.

[eeintl-blog]

Gas Engineering

Gas is a natural occurring compound composed of a complex mixture of hydrocarbons and is a subcategory of petroleum. Methane is a major component of the gas mixture. Natural gas has many properties which include temperature, viscosity, compressibility factor, pseudocritical pressure and gas density, etc. From the properties of natural gas, we can find the composition of the gas through measurements.

Basically, oil and gas engineer works in many areas which involves the extraction of oil and natural gas from different reservoir. This work can also be done by drilling engineer, production engineer or reservoir engineer. Gas engineers need to know all the advance and basic knowledge like Geo-mechanics, thermos hydraulic etc. The engineers follow Petro physics knowledge to do their work accurately.Following is the main work a gas engineer does:

· Information about drilling activities

· Follow the laws

· Find out the location of production

· Keeping in mind all the safety while working

· Interpret the result accurately

Development of natural gas resources is done in natural gas engineering. This work is done by team work. A reservoir engineer finds out the gas and oil that can be extracted from the expected area. Then drilling engineer select the method and equipment by which process is to be done. Finally, oil and gas engineer manages the whole process and result. Many new positions of engineering came into existence, since the industry is becoming more advanced.

During the last 30 years, oil and gas training attended by over 4000 participants, which shows the interest of people in the field of gas engineering. This training is also organized by companies which know about this field. A well-known company names as Energy Expert Industry(EEI) guides wonderfully about how an engineer can do their work more accurately as this company is known for their best management consultancy.

On gas engineering, the duties of an engineer depend on location, type of material or gas, etc. they have to extract, process and transport natural gas or petroleum. For this, the information and knowledge about the material you are extracting is very important. Also the method of transferring the material so that it will remain as pure. While transferring, engineers need pipelines. Here, again, everything should be of best quality and reliable so that no gas can be wasted. Moreover, the engineer should know how to handle with the machinery he is dealing with. For this purpose, you definitely need a better training. As described above, Energy Expert Industry (EEI) is highly recommended for guidance. As the location of extraction is different in different countries, it is not necessary that the same tool, machine or pipeline is used for extraction. Depending on the spot from where gas is to be extracted, a specific tool has needed. The Energy Expert Industry (EEI) provides you the best quality of tools, machines or pipeline you want within the budget you provide. Furthermore, Energy Expert Industry (EEI) also guides you how to use it and the safest method you can do.

[eeintl-blog]

Electrical substation

The electricity generated by the plant is not supplied straight to our homes. Electrical substations are used to lower the voltage of electricity and then it is supplied to homes and other living areas. The substation also manages the network to supply a fault free electricity.

The major part of a substation is a power transformer. Atransformer is used to increase or decrease the voltage of electricity. Transformer lowers the voltage and make it suitable for further distribution. Switch gear controls and protects the circuit of substation and reduce the supply of fault currents. Circuit breakers are used to cut the supply if current if there is any problem. This works so quickly to avoid any danger.

There are two types of substations:

Large substation: it is also known as Grid substation. This substation is used to supply electricity to a long distance area. The high voltage passes with insulators which is made of glass and ceramics so that current does not travel to the ground.

Small Substation: this substation is used to supply electricity to factories, hospitals, and rail network. This lowers the voltage between 11,000 volts and 33,000 volts.

An electrical current may pass through several substations to reach its destination. Substation may be formed with required buildings or outdoors. In urban areas, indoor substations are also found to avoid the noise of transformers and to keep the switch gear safe from rain and pollution.

An earthing system must be designed to avoid fault current to flow in the earth’s surface. This can cause a ground potential rise and may cause damage. This is the reason behind properly grounding ametal fencearound the substation. This causes a substation a bit costly because it requires reliability and more space to build a well-designed substation.

Now-a-days, in the times of power shortage and increasing demand of electricity, working of power stations is becoming more important. Power companies are under pressure and starting to pay much more attention for the better production of electricity. Each and every thing is under supervision with a strong level of security and safety, which will lead them to achieve their aim.

The best company known for their best quality products within your budget is the ENERGY EXPERT INDUSTRY (EEI). We guide our clients how they can manage and build a system with the best safety and in convenient budget. We are here to solve all your problems. Energy Expert Industry (EEI) is highly recommended for consultancy for safer and profitable business.

[eeintl-blog]

Substation design

Stepping up and stepping down the voltage for distribution, transmission and for switching purposes, substations are basically used. When the electricity is generated, it has to be transmitted to far apart where it is required. So, to meet this requirement, substations are used to transmit the electricity at very high voltages and at low currents to reduce heat and many other transmission losses. Moreover, for safety purposes, circuit breakers, transformer and capacitor are also used by substations.Transformers transform the high voltage electricity to a lower voltage. Circuit switches used for the direct flow of electricity. Breakers stops the flow of current when the current flows too fast and too slow to safe the circuit from danger. Capacitors are used to improve the supply of electricity. Substations are both indoor and outdoor and enclose by a wire a fence for safety purpose. These are designed in a specific way.

In order to design a substation, the first step is to design anearthing and bonding system. This function neutralizes the transformer so; the maximum fault current can pass. In this way there will be no thermal or mechanical damage occur within the power substation and no dangerous potential will develop.

The materials use in earthing is:

· Conductors

· Connections

· Earthing rods

· Switchyard fence

Substation Layout

For the security of supply, layout of substation is very important. Three kinds of layouts are there

· Single bus bar: in this type of layout, each circuit has its own circuit breaker. After isolating the circuit breaker, all circuits may be restored. Substation outage never result in loss of supply.

· Mesh substation: in this type of layout, two circuit breakers is required to connect or disconnect a circuit, and for the disconnection of a circuit, opening of a mesh is must. Without loss of supply or protection, circuit breakers may be repaired. There is no need of additional bypass facilities.

· One and a half circuit breaker layout: in this type of layout, 9 circuit breakers is there. One and the half circuit breaker is used to protect one feeder. Any one pair of circuits, or groups of pairs of circuits can be operated. There is less chance of loss of supply.

Principle of Substation Layouts

Substation layout based on:

· Number of switchgear component

· Rules of spatial separation. Spatial separation rules include earth clearance, phase clearance, isolating distance and section clearance

· Separation of Maintenance Zones,

· Establishing Maintenance Zones,

· Electrical Separations. Three main separations are needed; the separation between the terminals of the bus bar and their connections, the separation between the terminals of the circuit breaker and their connections, the separation between the terminals of the feeder isolator and their connections.

Components of a Substation

Components of a substation effect substation layout the most.

· Circuit Breakers

· Current Transformers

· Isolators

· Conductor Systems

· Insulation

· Power Transformers

· Overhead Line Terminations

After establishing the layout for various voltage levels, transformers may be connected between them.

To construct a substation, Energy Expert industry (EEI) provides and guides how to design and construct a plant both outdoor and indoor. The Energy Expert Industry (EEI) is known for their best customer service and we provide all the above mentioned consultancy and engineering services.