electricalstudents17 - Tumblr blog

[electricalstudents17]

Create a blog about how social media has helped families, social workers, and the government in discerning information during calamities. Differentiate it from the past where information is only provided by the media (TV, radio, and print)

-It helped families, social workers and government in discerning information during calamities. Through social media every family can easily communicate their relatives from other places especially those outside the country. While social workers it can be a tool to educate them informations during calamities

[electricalstudents17]

CIHS EIM STRANDS WORKSHOP TOUR-BASIC ELECTRICAL WIRING TUTORIAL

WIRING ELECTRICAL TOOLS

1.PHILIP SCREW DRIVER

DEFINITION : THE PHILIP SCREW DRIVER WILL BE USED TO TIGHTEN THE SCREW ON OUR WIRING BOARD TO ADJUST THE CONNECTION OF THE JUNCTION BOX, UTILITY BOX AS WELL AS THE PANEL BOARD AND OTHERS

2. FLAT SCREW DRIVER

DEFINITION : A SCREW DRIVER WITH WITH A FLAT WEDGE-SHAPED TIP THAT FITS INTO A SLOT IN THE HEAD OF A SCREW. TYPE OF: SCREWDRIVER. A HAND TOOL FOR DRIVING SCREW; HAS A TIP THAT FITS INTO THE HEAD OF A SCREW.

3.LINE MAN PLIERS

DEFINITION : USED IN THE ELECTRICAL TRADE TO CUT , STRAIGHTEN , AND BEND WIRE , AND ALSO TO TWIST WIRES TOGETHER WHEN MAKING SPLICES

4.LONG NOSE PLIERS

DEFINITION :PROPER USE OF LONG NOSE PLIERS : USE TO GRIP SMALL OBJECTS , REACH AWKWARD PLACES , HOLDING WIRES, BEND LOOPS , AND ATTACH WIRES . WORK INVOLVING SMALLER GAUGE WIRE.

5.SIDE CUTTER PLIERS

DEFINITION : SIDE CUTTERS ARE USED ON WIRE AND THE LEADS OF ELECTRONIC COMPONENTS , AS WELL AS TO STRIP INSULATION . STRIPPING REFERS TO SAFELY REMOVING THE OUTER LAYER WITHOUT DAMAGING THE CONDUCTORS UNDERNEATH . IF THEY DO GET NICKED , THE CONNECTION MAY BREAK OR IT COULD CAUSE AN ELECTRICAL SHORT CIRCUIT.

6.LEVEL BAR

DEFINITION : A LEVEL IS A TOOL USED TO DETERMINE WHETHER A SURFACE IS HORIZONTAL (LEVEL ) OR VERTICAL (PLUMB ). WITHOUT THIS , YOU CAN'T BUILD A HOUSE THAT WORKS WELL OR LOOKS GOOD —NOT TO MENTION HANG KITCHEN CABINETS OR TRIM OUT A DOOR.

7.WIRE STRIPPER

DEFINITION : WIRE STRIPPERS ARE AN ESSENTIAL TOOL FOR ANY ELECTRICIAN OR MECHANICAL ENGINEER . WIRE STRIPPERS CREATE A NEAT AND TIDY CUT TO REVEAL YOUR WIRES , READY TO BE SOLDERED OR HAVE A CONNECTOR ATTACHED

8.PULL PUSH RULE

DEFINITION :A PUSH -PULL RULER IS A TAPE MEASURE THAT CAN BE WRAPPED TOGETHER IN A COMPACT CASE . IT IS USED TO MEASURE LONG , SHORT AND STRAIGHT LENGTHS . THE BODY OF THE TAPE MEASURE IS THE CASE.

9.MULTIMETER

DEFINITION: A MULTIMETER OR A MULTITESTER, ALSO KNOWN AS A VOLT/OHM METER OR VOM, IS AN ELECTRONICS MEASURING INSTRUMENT THAT COMBINESSEVERAL MEASUREMENT FUNCTIONS IN ONE UNIT. A TYPICAL MULTIMETER MAY INCLUDE FEATURESSUCH AS THE ABILITY TO MEASURE VOLTAGE, CURRENT AND RESISTANCE

A VIDEO IS ABOUT CIHS EIM STRANDS WORKSHOP TOUR-BASIC ELECTRICAL WIRING TUTORIAL

#activityemtechcihs

#youtube