glasswindowequipment-blog

[glasswindowequipment-blog]

From monolithic glass to finished insulating glass

Today, I’d like to talk about the process from simple glass to insulating glass.

Above all, we already knew why more and more people choose double hollow glass in door window installation nowadays, have more very person can choose 3 layer glass. That’s because insulating glass has a good insulation performance, can make the room warmer. Double glazing also improves security and is firmer to a certain extent.

First of all, we should choose the right thickness of glass, glass too thick, the final production of insulating glass will be thicker, not conducive to installation and use, but also difficult to operate. After selecting the glass, we should use a glass cutter to cut the glass into the required size according to the size of the Windows and doors. This is the first step in insulating glass production.

Automatic glass cutting machine

Next, we clean the glass. In general, insulating glass production will choose a complete insulating glass production line. This production line in addition to the transfer section generally consists of three parts, cleaning, pressing and sealing adhesive three parts. First glass will wash, clean after dry, dry, glass transfer out of the washing machine, this time will have the staff has been filling a desiccant, and after the first article aluminum spacing of butyl rubber seal on the glass, the aluminum spacing shall be made according to the size and shape of the glass, there is a certain width, and the final formation of the hollow glass thickness has a certain relationship. The next step is to clean and dry the second piece of glass. After the second piece of glass is delivered, the two pieces of glass and the aluminum strip are put in place, and the transfer continues to the next step.

Automatic aluminum spacer bending machinerans.

Butyl extruder machinem

Desiccant filling machine

Then comes the pressing stage, which is then transferred to the sealing section. The second sealing glue of insulating glass is made in this paper. Automatic sealing adhesive. Apply a circle of paint around the glass, and then a piece of insulating glass is finished.

Clean and press glass.

Auto Sealing line

The above is the whole process of our insulating glass production, in this process, we also need some glass handling machine, glass suction machine and so on. If you are interested, you can click the link to find out.

[glasswindowequipment-blog]

How did the round window come about

Along with the development of science and technology, the progress of The Times, our material life and spiritual life constantly improve, aesthetic level is in constant growth, we are no longer satisfied with bland square window, we are in the premise of guarantee quality, gradually to design the Windows of various shapes, round, S – shaped or arched and so on.

Where do these curved profiles come from? As we all know, profile in the initial production of the time, are straight, will not have a little bit of radian, since we need is not straight, it can be put on, is not it? So someone developed a straight profile into a curved profile of the machine, that is, our hero today – bending machine.

With the different needs, the progress of science and technology, more and more types of bending machine. What we say today is often used in the door and window industry aluminum profile bending round machine.

This is the most commonly used CNC bending machine. This machine is mainly used for bending iron, copper, aluminum and other metal materials and shaped materials. It is the ideal surface processing equipment for furniture manufacturing, forging iron engineering manufacturing, aluminum alloy doors and Windows manufacturing, aluminum alloy doors and Windows manufacturing, decorative steel structure enterprises. CNC control, CNC software and touch screen, easy to operate, high precision. It can bend various shapes, such as arch, c, s, u, whole circle, spring and so on. The machine can also detect material rebound data and eliminate material rebound. And no damage or scratch to the bending material, suitable for paint or color profile.

According to the profile size, we will make the appropriate pressure roller, set the required shape, radian and other elements, after starting can wait for the profile done. In this way, we have curved profiles to make Windows with profiled shapes.

That’s our fully automatic aluminum profile bending machine. Next time, let’s learn how PVC goes from straight to curved. Interested friends can collect the following url, next week update oh.

[glasswindowequipment-blog]

The formation of Windows has been revealed

Hello, guys. This week we find out how Windows are made. We saw how the window frames were made.

Look at these beautiful Windows, are you curious about how they were made? Today we look at how window frames and glass make up the Windows to be used. When we make the window frame, we have determined the size of the window, so we need to cut the appropriate glass according to the size, using the automatic glass cutting machine line, we can better achieve mechanical processing.

Set the required size, place the glass, cut, through the next stage or transmission section of the cut glass transfer to the edge grinding machine, or can omit this step, directly to the door and window gluing machine, put the window frame and glass, automatically find the edge gluing. Seal the window frames and glass. Set aside to dry. So a window can be installed and used. Below is the full automatic glass cutting line and window gluing machine：

In fact, some other processes are needed during the process of making Windows, such as glass handling, window frame assembly and so on. Glass handling will use a variety of handling tools, such as suction crane. We also introduced the type of suction crane before. I’ll mention two briefly here. One is fixed column cantilever suction crane, can be placed on both ends of the production line, used to carry the glass is the best. Another is a manual handling tool, and the principle of the suction crane is the same, but a little smaller, only suitable for handling small glass. See the diagram below for details.

And the window frame assembly is another processing line, the need is a set of processing equipment. We’ll talk about that next time. How the Windows were made, that’s it, guys, see you next week.

[glasswindowequipment-blog]

How are window frames made

Some of you who have read our previous articles have joined us to learn how Windows are made. This week we take a closer look at how window frames are made for aluminum doors and Windows.

First, we will find the aluminum profile manufacturer to customize the profile we need. The profile needs us to determine the size according to the Windows and doors we want. After the profile is determined, it is the production of the frame.

We need to determine the size of the required frame and cut the profile according to the demand. This is what we often refer to as a double-end cutting saw, but it’s also possible to use a single-end cutting saw on a budget. Double-end cutting saws are more convenient. Place the material on the machine, press the start button and cut out the desired length and Angle. In general, double-headed saws can cut 45 degrees. After cutting enough of the required ingredients, we can proceed to the next step.

We need to prepare other materials, some need to prepare corner code, some need to prepare screws and so on. The Angle code used here can be cut with an Angle code saw. Set the width of the Shouting, fix it and then you can cut it. Our corner code saws are automatic feeders, so it is safer to have a shield.

Before the assembly, generally will use copying milling, water tank milling, keyhole slot machine and other machines, in the profile of the appropriate position on the milling out of the appropriate hole slot, used to install the door lock or reserved water tank. This step is usually done before Angle formation. In this way after the Angle can be a finished window frame.

When the corner code is ready, we need to assemble the corner code and profile. PVC window frame is used in the way of welding, aluminum profile is used in the way of splicing. With the corner code card in the profile, fixed, here is the use of the corner machine. There will be no problems such as loose, fixed will be very strong. When you have all four sides together, you basically end up with a border.

[glasswindowequipment-blog]

Machines sent to Senegal

Hello, everyone. Today, just after Christmas and approaching New Year’s day, I wish you all a happy New Year.

A few days ago, our company received an order from a customer in Senegal. It only took six days from confirmation of purchase to payment and delivery. It also includes the time for packing. This is our company’s fastest order, the fastest delivery. Another record for the fastest delivery.

The products ordered by the client include double copy, small end milling and a corner machine.

Simple machine, simple customer requirements. All are regular models, regular configuration. Before the customer decides to place an order, the customer also goes through many times to understand the product. The staff of our company has made positive and effective reply to every inquiry of the customer, which is the premise for the customer to make such a quick decision to place an order for payment.

The staff of our company pay the most sincere sincerity every time when facing customers, and treat every customer with the greatest sincerity, personally understand the needs of every customer, and try to meet all reasonable requirements of customers. This has always been the norm in my company.

We “Care What You Care”, and supply products and service beyond expectation.

[glasswindowequipment-blog]

What is Glass Window Equipment?

In the glass processing industry, glass is one of the most important materials that you cannot do without. Glass is very significant in our homes and most especially, our industries as it serves as strong protective equipment. In most companies, especially in an office setting, glass is one of the most used equipment, especially in the creation of doors and windows.

The entire glass processing process is done in a typical glass processing factory with a lot of machines and equipment involved. First, there is the glass cutting machine which helps in cutting the glass into desired shapes and sizes, then, there is the edging machine that helps the edges of the glass to be smooth and presentable to the customers. The entire process, though it is a rigorous process gets the right results for you with ease. Glass is the most widely used material when it comes to the creation of window equipment and that is why most of the production process has to be made in high standard.

Glass Window Equipment is the equipment that is used during the production, installation, and maintenance of glass windows for the homes and offices. The finished work in the glass manufacturing process is then used to create windows and doors according to the specifications of the homeowners. From the beginning of the manufacturing process down to the point where the glass is being sold, this material undergoes a very rigorous process to make it fine and ready for use by the customers.

Features of the Glass Window Equipment.

During the entire process, a lot of things have to take place. In a typical production facility, modern machines have to be used to get the job done fast timing. That is why the CNC type machine is mostly used to create glass window equipment. In a glass manufacturing factory, during the creation of this glass window equipment, a lot of safety measures have to be put in place to ensure that there are fewer accidents in the workplace.

Amongst all the companies manufacturing these glasses, the only company that produces some of the best glass window equipment is the Shandong Care Machinery Technology Co. LTD based in Jinan China. All over the world, we have excelled and perfected our skills when it comes to the manufacturing of top-notch glass window equipment that a lot of people use and love.

In your office and your home, you may be wondering how to best the best glasses which are made to perfection for your space.

Conclusion

Shandong Care Machinery Technology Co. LTD is one of the best companies you can find that makes this equipment to perfection. Your glass windows equipment needs to be made to standard and to be the very best at all times. To get the best products, we are always there for you in cases you are trying to reach us in any way. We are there for you at any time. Visit glasswindowequipment.com now!

[glasswindowequipment-blog]

Importance Of Glass Edging Machines

After a piece of raw glass has been cut, the importance of edging the cut glass cannot be overemphasized. Edging the glass material will prevent individuals from getting a sharp cut that may arise from the roughness of the material. During and after the entire cutting process, the edges of the glass materials are usually very rough and sharp. If they are given to the clients without going through proper edging procedures, it may cause a lot of accidents. That is where the glass edging materials come in. When the glass cutting machine is done cutting the glass material, the finished material is then sent to the glass edging machine to smoothen the surface and give it a fine finish. The finished glass material is what is sent to the market for sale.

In the industry, glass edging machines are very important because they help to improve the overall aesthetics of the materials. The entire process of glass cutting and finishing will not be complete without the inclusion of these glass edging equipment.

How is Glass Edging Done?

Glass Edging is done by the use of glass edging machines, which are very useful, especially in the glass cutting industries. There are several types of Glass edging machines that depend on the results you need. They are

Glass Pencil Edging machine.

Double edging machine.

Diamond wheel edging machine.

Glass Pencil Edging Machine.

The glass edging machine is very popular, especially when it comes to printing pencil-like edges especially with glasses of various thicknesses and various lengths.  In several industries, this is one of the most widely used and it does all the necessary edging works all at once. The various functions of the Glass Pencil Edging Machine include fine grinding and rough grinding of the edge. Another great reason why a lot of people love this machine is its consistency when it comes to the edging process.

Double edging machine.

After cutting the glass in the factory, the manufacturers may prefer to create double straight sides at both edges of the glass. This is where the double edge machine comes in. This machine is very reliable and over the years, it has been proven to be very effective. For most of the machines, there is a Programmable logic controller attached to it. These machines are referred to as the Automated Double-Edged Machine. These programmable logic controllers help the operators to set the right parameters that the machine will use for the entire processing.

Diamond wheel edging Machine.

The Diamond wheel edging machine is a glass edging machine that is very effective in smoothening the edges of a glass material. Several industries also use this material because it gives you the best results possible.

Conclusion

Glass Edging machines are very important, especially for the overall finishing of the glass material. It is one important machine that cannot be overlooked during the entire manufacturing process. TO get your job done for you, you need the best equipment, especially the glass edging machine.

[glasswindowequipment-blog]

Why You Need A Glass Polishing Machine For Your Facility

The glass polishing equipment is very useful, especially in the entire glass manufacturing and processing industry. It is an essential part of the glass processing industry which helps in the smoothening of the glass surface before and after cutting. For a lot of people, it is also referred to as glass grinding and it is important to produce a fine finish of the glasswork.  

In the industry, glass polishing machines are used for this kind of work. In some places, they make use of the manual glass grinding machines but over the years, there has been a lot of complications and it does not produce the kind of precision that the customers would need. Over time, as technology has been evolving, these machines have been created for the sole purpose of making the entire glass polishing process easier and giving it the very best finish that customers will love and appreciate over time. These machines make the entire work process easier, fast and reliable.

WHY YOU NEED A GLASS POLISHING MACHINE IN YOUR FACILITY.

As a facility manager in charge of a glass processing industry, you will most likely want to get your jobs done in the quickest time possible. In your facility, it will be very wrong of you to settle for using manual means of grinding and polishing your glass.

As a manager, you need to boost your productivity, and making use of manual and mundane means of grinding and polishing will not help you do so. These machines are built with you and your company in mind to help ease the entire grinding process. There is no better place you can get this machine except for Shandong Care Machinery Technologies.

All around the world, several facility managers have given us a lot of positive acclaims based on the standard of our work and our production processes. Over the years, we have satisfied our clients by giving them the best when it comes to glass processing equipment.

Shandong Care Machinery Technologies have an excellent record, especially when it comes to these glass polishing equipment. We know that a good glass polishing machine will help any glass process industry to improve its overall work performance and increase the rate of output. We live in a time where the use of manual technologies is not accepted in any way.

But it is quite sad that a lot of people still center their entire business on these manual machines. In the process of glasses processing, the need for the glass polishing machine cannot be overemphasized. You cannot skip any part of the entire process without using this glass polishing machine.

If you are an industrial manager, facility manager or person in charge in the industry manufacturing and selling of glasses for commercial use. Then you will need this machine to work. If you are looking for the best price to get this machine without breaking the bank, then Shandong Care Machinery Technologies is always available to cater to your needs.

[glasswindowequipment-blog]

Why should your processing industry get a glass cutting machine?

Glass cutting machines are becoming very useful equipment when it comes to getting small or large glasses cut, especially in industries. These machines range from the smallest to the largest depending on the needs of the industry. As an individual, you may be wondering what these glass cutting machines are made up of and how they are operated to get the job done. We will discuss that in this article.  

WHAT ARE GLASS CUTTING MACHINES AND WHAT ARE THEY USED FOR?

Glass cutting machines are industrial equipment and tools built for the sole purpose of cutting glass into various shapes and sizes according to the needs of the customers and the clients. They are very useful because the process of cutting these glass materials manually can be very risky and very lead to a lot of accidents and also consume a lot of time. So, to get the job done, these machines were created to give you good jobs with accuracy and precision.

In most cases, these machines are used in the manufacturing of glasses mostly for windows, doors, mirrors and other materials that are made up of glass. These products are very useful, especially in homes and offices. While building a home, proper considerations are taken to ensure that windows and doors are provided accordingly. That is where these glasses come in. These machines help to cut these glasses into desirable shapes to fit the requirements in the home. Glass is a very important material, and in the industry, these machines help to get their work done faster and precisely.

HOW ARE THEY OPERATED?

The beauty of these machines is that it is easy to operate when you have learned and mastered all the technicalities behind its operation. It is important to note that these machines are not built for anybody to operate. To use or operate these machines, one must be aware of the precautionary measures involved and know how to properly handle the machine with care. The operation of the machine is a steady process that has to be learned and practiced over time.

That’s why in several industries, especially here in our company, they are a team of experts who have been trained adequately on how to handle the machine with care and how to deliver their jobs with accuracy and precision. Having a good glass cutting machine simply means that the quality of your work will be unparalleled. To help the machines lasting longer, proper care needs to be giving to the machines. Regular maintenance has to be observed to get the machines in check to perform optimally.

CONCLUSION.

A Glass cutting machine is there to serve you and give you the best cut for your windows, doors and every other area where there is a need for glass protection. Shandong Care Machinery Technology has the best machines that can give you the best results when it comes to glass cutting machines. They have the right tools and personnel that will ensure that you are getting the best at all times.

[glasswindowequipment-blog]

The Guide To Vacuum Lifter Machines

Glass lifter machines are a type of vacuum lifting tool. Vacuum lifting equipment is generally utilized in numerous industrial areas for the lifting and handling of materials that have a level or smooth surface. Specifically, materials, for example, metal or glass plates, slabs made from concrete, pipes, boards of plaster, plastic covers, concrete packs, brew barrels and tins, and so forth, can be handily lifted and taken care of utilizing vacuum lifting materials. Vacuum lifting equipment uses pads that help to achieve the suction features.

Two essential forms of vacuum lifting tools

The two basic types of vacuum lifting equipment include;

Vacuum lifting tubes (VLT) – this is a lifting framework or machine fusing a vacuum tube with suction pads utilized for both holding and lifting loads of different kinds.

Vacuum lifting attachments (VLA) – this is a separable lifting attachment that is made up of suction pads. The suction pads are fixed to a free lifting machine, for example, connection to a crane or pressure-driven excavator arm or forklift truck. The attachment is utilized for grasping the load while the device used to lift the entire get together.

The distinction between a VLT and VLA is that VLT is used for grasping and lifting, while the latter works as an attachment used to hold the load.

How do Glass Vacuum Lifters work?

The intensity of the vacuum is brought forth by utilizing uniquely structured vacuum pads whose role is to hold the load. The vacuum pads can be used separately or in pairs or more to suit the lifting operation. They can also be incorporated with extraordinary lifting outlines or frames that are called Vacuum Beams. The beams are suspended from overhead lifting gear, lifts, forklift trucks, or integrated with vacuums that function as special-purpose machines for transfer.

Guidelines for safely using glass lifting vacuums

These machines are quite dangerous. Therefore, below are a few guidelines that will keep you safe when using them;

Never work the lifter until it is properly inspected.

Report any abnormal activity or security worries to a certified individual and suspend utilization of the vacuum lifting gadget until wellbeing has been guaranteed.

Try not to utilize vacuum lifting gadget with a “Faulty” tag until it is repaired and declared safe for use again.

Try not to utilize lifter if limit or wellbeing markings are absent.

Ensure that the supporting structure and load-bearing attachments the likes of the crane, chains, and snare are appraised to make sure that they can handle the heaviness of the lifter and load as well.

Make certain to deduct the heaviness of the lifter from the crane while computing the net limit of the framework.

Utilize a protection lock on the hook of your crane to hold your lifter.

Conclusion

When using vacuum lifters for loads, make sure that the loads are either non-porous or slightly porous. Smooth loads would also do, but anything other than that would be dangerous. Also, note that the degree of porosity affects the ability of the device to make up for any form of air leakage.

[glasswindowequipment-blog]

Tips For Glass Washing And Basics Of Glass Washing Machines

Glass washing machines are used for washing glass surfaces like windows and doors. In addition to washing the Glass, the device is also used to dry the Glass. Also, the machines can be used to clean both flat and curved surfaces. The machines for washing glass can be used by Glass manufacturers to clean, dry, and test the glass products before they get out of the production stage.

Tips for Cleaning your Glass Manually

Below are some general tips that would be useful for cleaning Glass;

Use the topmost to nethermost technique

If you have to clean your glass equipment personally, whether utensils, windows, or doors, and you do not want there to be a streak, then you ought to clean from the top heading downwards. Because the solution you use for cleaning is likely to drip, take advantage of the force of gravity and let the cleaning solution trickle downward to areas that you have not washed. Begin with the topmost region and proceed down. This will help make certain that no cleaning solution dribbles will remain on glass areas that you have already cleaned.

Try Washing them on Day that isn’t Sunny

The technique applies to windows and doors that are made from Glass. This may seem like an absurd technique as sunlight helps you to see dirt streaks on your Glass better. The sun, in any case, can cause the cleaning detergent to dry off hastily. This would end up causing buildup and even more streaks. If you are certain that the day will be cloudy, make a point to clean your glass windows and doors. Reason being, the cleaning solution will not dry off until you are ready to wipe it. By doing so, your glass will end up looking incredibly sparkly.

Pay Extra Attention to the Corners

Regardless of how much you attempt to do the best cleaning job, buildup tends to develop toward the sides of the glass, especially for the case of windows and doors. Getting rid of this buildup can be difficult, especially if you do not have the correct instrument. Q-tips or cotton swabs are the best material for cleaning those windows areas that seem challenging to reach as you go about your cleaning work.

Pay Attention to the Wood and Other Materials

Many glass and window cleaners can seriously damage the confined wood regions of our mirrors and windows. You can protect your wooden frames from damage by placing a little material on the wood. The wood will help to absorb the drips. Furthermore, abstain from splashing an excess of cleaner at the same time or soon, rather, try to sprinkle the window with small in small portions from the top to the bottom as you work on it. The same applies when you are cleaning other types of glass equipment that are made from a combination of glass and other materials.

Conclusion

Glass washing machines are used mostly in industries than in the home setting. How they are designed depends on the type of application that the device. Glass making machine manufacturers design their equipment depending on the mode of application for which their clients are planning to use the machines.