gsmdevelopers-blog

[gsmdevelopers-blog]

Samsung B110E Stock Rom Flashing Process

Download flash file & tool if you not already downloaded and extract it using winrar or 7zip.

Now from spd upgrade open “UpgradeDownload.exe”

Now click on gear icon to select downloaded firmware as show in picture below.

Now Select the flash file you downloaded , the same way as show in picture below.

Now its time for final click , click on play icon in tool as show in picture below.

Now connect your handset by pressing OK button as show in picture below.

Wait for flashing to be complete , happy flashing

For more info :  Samsung B110E Flash File

[gsmdevelopers-blog]

How to flash mi 6a using sptool and auth

Download the latest firmware and tool and also auth from link above if not already.

Extract everything you downloaded and open sp flash tool folder and run flash_tool.exe.

In Download-Agent select MTK_AllInOne_DA_4-19_-signed.bin,from Mi 6A DA Auth Folder.

In Scatter-Loading select scatter from firmware you downloaded.

Now time to click on Download button in tool to let start the flashing process.

Now turn off mi 6a if not already so , and press and hold vol up + vol down.

While holding vol up + vol download insert the usb cable and wait for process finish in sp flash tool.

Happy Flashing

For firmware or auth please download from here : Mi 6A Flash File

[gsmdevelopers-blog]

How to flash Jio F220B Flash File

First download the file from link above and also QFlash tool.

Now connect powered off phone to cable while pressing ‘*’ (Its a boot key to connect phone in flashing mode )

If everything went right now its should make Qualcomm HS-USB Diagnostics 9008 & now we are ready to flash.

Now install QFlash too you downloaded earlier from link above and install it.

After successfully install QFlash open it from desktop shortcut.

Now click on load content button and select content.xml from flash file you downloaded earlier.

Now click on download content button in QFlash software and wait for finish.

Once tool finish its work remove battery and reinstall it to make phone powered on.

For firmware please visit :  Jio F220B Flash File

[gsmdevelopers-blog]

How to use mi note 7 edl point to get QUALCOMM 9008.

Disconnect battery and usb cable if connected.

Short Point A & Point B which is shown in picture above using tweezers or some sharp clips.

While keep shorted Point A & Point B insert the usb cable.

If you correctly shorted mi note 7 edl points and did all well , your device should be connected to pc as QUALCOMMM 9008.

For more info : Mi Note 7 EDL Point

[gsmdevelopers-blog]

Umt Latest Setup

Its not easy task to take care of your box & dongle keep updated while its take so much time to visit each & very website to check new , while gd make it easy for you on gd you can see daily news of every dongle like umt so keep it with us.

get the latest setup here : UMT Latest Setup