hayscooling

[hayscooling]

5 Plumbing Maintenance Tips That Save You Money

A typical household of four people uses 144,000 gallons of water on average every year.

With every flush and faucet turned on, your pipes are subjected to a barrage of pressure and debris.

We’ve put together a list of plumbing maintenance tips that will not only help you keep your pipes clean and running smoothly, but also ensure you spend less and keep your bills down.

Save Big with These Plumbing Maintenance Tips

The best way to avoid problems with your plumbing is to be proactive with your maintenance and habits.

Cleaning pipes and performing maintenance is both easier and cheaper in the long run. If you wait until there is a problem, it can mean entire areas of your home being dug up or broken to get to the pipes that have been affected.

1. Notice a Leak? Fix It Immediately

Showers and bathroom spouts are notorious for having a few leaks while running. In the more extreme cases, there will be a whole stream of water running away from the main flow.

Most people, however, do nothing about it because they don’t see a problem. They that it’s just a few drops of water here and there. Or that since they’re having a shower the walls are getting wet anyway.

But studies conducted by organizations like the EPA have shown that leaks in the average American household equal almost 10,000 gallons every year. The problem is that you never spend all your time watching your tap dripping so you’re only aware of it when you use it. But during all the hours you spend at work, sleeping, or watching TV, the tap is still dripping constantly.

This is not only a huge waste of water but it also contributes to your water bill. On average, fixing and sealing any leaks can save you up to 10% on your monthly bill.

That may not seem like a lot, but just like the dripping tap, the money you save can add up to a huge amount as the years go on.

2. Rethink Your Garden

Having your own garden is a lot of fun and it gives you a lot of opportunities to create a beautiful space for your home.

But it’s common for many of us to not think about the types of plants we’re buying and what effect they may have on our pipes. Often, we go for plants that we think will look pretty and help our yard stand out without thinking about their root systems.

Roots seek out water and will grow in the direction of any sources they can detect. Unfortunately, this means condensation on pipes or any small leaks will act as a magnet and attract the roots towards them.

Over time, the roots can wrap around the pipes or work their way inside causing blockages and, in worst case scenarios, cracks.

Fortunately, there are many gorgeous plants that have short roots making them perfect for yards. Camellias, rhododendrons, and even lilacs are all great options if you want to protect your plumbing and save an issue in the future.

3. Don’t Let Your Drains Clog

If you turn on the tap and the water flows away easily it’s normal to assume everything is working great—but that’s not always the case.

The problem with household drainage systems is that they can function well even with a lot of build up. It’s only when it becomes overly clogged with debris that the water starts bubbling back up at you and it struggles to drain. At this point, however, the gunk has already gotten out of control and you may need to hire a professional to fix it.

Over time, things like hair, grease, and tissue all build up and get harder to remove. So when your drains are working fine, that’s the right time to consider cleaning them.

By using drain maintenance products at least once a year, you’ll make it a lot easier for yourself and save potential costs in the future.

4. Upgrade Your Toilets and Showerheads

Another way to save money and reduce your water consumption is to invest in high-efficiency toilets and showerheads designed to minimize the flow of water.

Older models of toilets can use anywhere from three to seven gallons of water every single flush. It’s for this reason that toilet flushing accounts for up to 30% of a home’s water consumption.

The best models are designed to use a lower flow of water that can slash the amount used each time. These high-efficiency toilets can flush with as low as 1.28 gallons which can be a reduction of 50% or more compared to older toilets.

Equally, a water-saving showerhead can help you save even more water and cut gallons from each use. If you also take shorter showers, over time you will see a significant fall in your water bill with less water also putting less strain on your plumbing.

5. Get a Professional

Think of it like this, you can buy all the products yourself and spend hours trying to figure out where problems are arising to be fixed. You can spend a little bit of money to get a professional to quickly clean everything and keep it good condition. Or you can wait until a problem occurs and spend hundreds of dollars on repairs and replacements.

When thinking about your costs over time it’s always worth thinking about what will give you the best long-term value.

Be Proactive

These plumbing maintenance tips are great places to start if you are looking to save money and problems from arising in the future.

The steps you take now are the most essential. Check out our special promotions and book an expert service with us today.

_______________________________________

If you run into any issues that require a professional, call an expert plumbing repair service in Phoenix! At Hays, our top-rated plumbing services are fast and affordable. Call us at 602-714-8270 now to schedule an appointment!

Read Related Articles:

Toilet Plumbing Made Easy: How to Fix a Clogged Toilet

When to DIY Leaking Faucet Repair and When to Call the Pros

Searching for a Plumbing Repair Company in Phoenix? Here’s What to Look For

Read full story at: https://hayscoolingandheating.com/plumbing-maintenance-tips-save-money/

[hayscooling]

What to Do When You Have a Broken AC Unit

The average cost of a new air conditioner is between $3,000 and $7,000. When you’re paying that much for a piece of equipment, you expect it to work all the time, right?

But sometimes, accidents happen and homeowners find themselves dealing with a broken AC unit. And it always seems to break right when you need it most.

When your AC isn’t working, it’s easy to start panicking or get frustrated.

But you don’t have to. We’re here to help. And we’ve put together a few simple things you can do when you can’t cool your home.

Check for Outages

When your HVAC system stops working right when you need it, it’s easy to assume the worst. But the problem might not be with your unit at all.

In fact, it could just be a rolling summer power outage.

Check the other appliances and electronics in your home. If they’re all working properly, the problem is your air conditioner.

If only a few of your appliances have no power, you probably blew a fuse. Head to your breaker box to check and reset any tripped breakers. This should restore power to your AC system.

If it doesn’t, schedule a repair appointment immediately.

Inspect Your Thermostat

Accidents happen. And sometimes, the thermostat gets turned off or temperature settings change.

Before you jump to conclusions and start worrying about a broken air conditioner, check your thermostat.

See if any of the settings changed by accident. If not, try replacing the batteries. In most cases, this will be enough to reset the system and get your AC up and running.

If not, schedule a repair appointment and let a professional inspect the system.

Find Somewhere Cool to Go

When the temperatures rise, you need a place to cool off. And when your air conditioning system breaks, that place won’t be your home.

Head to a coffee shop, the library, the mall, or take in a movie. Anywhere with a functioning AC unit will do the trick.

If the weather is really hot, you may want to take the pets to their veterinarian and board them overnight. The last thing any pet parent wants is to watch their furry family members suffer in the heat.

Keep Your Refrigerator Closed

It’s tempting to use the refrigerator to cool off when the air conditioner stops working. But doing so could cost you.

Every time you open the fridge or freezer doors, you let cold air out into the room. This causes the temperature inside the fridge to heat up. Once it hits a certain temperature, the fridge kicks on and starts cooling down again.

The warmer the room is, the harder the refrigerator has to work to get cool again. When your AC is out, use the fridge sparingly. Open it when you need to and do it as fast as you can.

This will save you money on your electric bill and helps reduce the chance of adding a broken fridge to your list of repairs.

Close the Blinds

Your windows may provide a lot of natural light. But when you have a broken AC unit, they also let a lot of heat indoors.

As the sun filters through the window, it warms up the room. And over time, this can make your space incredibly uncomfortable.

It might not be as warm as it is outside, but you’ll still want to keep as much heat out as possible.

All you have to do is close the blinds or curtains. This blocks the sun and keeps the heat out during the day. Once the outdoor temps drop, open the windows and let the cool air inside.

Plug in a Fan

Believe it or not, using a fan can make you feel cooler the minute you turn it on. That’s because moving air is dryer than air in a still room. Remember, it’s the humidity that makes you feel the heat most.

When you circulate air with a fan, it helps to remove the humidity and helps the sweat on your skin evaporate.

If you have a ceiling fan in the room, use it. If not, a freestanding fan works just fine.

Keep in mind that you don’t have to leave the fan running while you’re not in the room. Since it cools you, not the room itself, leaving it on is just a waste of energy.

Don’t Put Off Repair Appointments

Putting off a repair appointment is the last thing any homeowner should do in the middle of the summer. It can lead to worse problems and leave you wondering why your AC isn’t working when you need it most.

As soon as you notice your unit struggling to keep up with the thermostat, have the system inspected.

The sooner you get it looked at, the less likely you are to deal with a broken AC unit in the first place. And if you can prevent it, you’ll save money in the long-run.

Get Your Broken AC Unit Fixed Today

The last thing you need to do is deal with summer heat without a working air conditioner. At Hays Cooling Heating & Plumbing, we’ll help you get your system up and running fast.

Our experienced technicians will inspect your system for damage and find the underlying cause. Once they do, they’ll make the repairs fast, leaving you with a cool and comfortable home.

Don’t wait until you’re dealing with a broken AC unit. Stay on top of repairs and contact our team to schedule a routine maintenance appointment today.

_____________________

When it comes to Phoenix cooling repair, look for the best air conditioning company to keep your unit running strong, even during the blazing hot summer months! Our trusted professionals work hard to provide you with exceptional AC repair and replacement services at a fair price.

Call us today at (602) 714-8270 or contact us online to schedule an appointment! It Pays To Call Hays!

Read Related Articles:

5 Signs that It’s Time for an AC Upgrade

What Do You Get From an Air Conditioning Tune Up?

Switching from Heat to Air Conditioning When Winter Ends

Read full story at: https://hayscoolingandheating.com/a-broken-ac-unit/

[hayscooling]

How to Do the Dirty Job of Clearing Toilet Blockage

Few things are more annoying — and nastier — than a clogged toilet.

Prevention is certainly the best cure when it comes to toilet blockage, but if you have a clog, you may be able to fix it on your own.

However, because of the serious health risks associated with exposure to sewage, it’s important that you know when to call in a professional to help.

In this post, we’ll tell you all about some of the most common causes of a clogged toilet, and offer you basic tips on how to unclog a toilet with standard blockage.

We’ll also fill you in on when it’s best to call in a plumber, and where you can go to find the experienced help you need.

Remember, a toilet blockage isn’t something that’s going to magically go away on its own. Read on to understand how to stop the problem before it gets any worse.

Why Toilet Blockage Happens

It might not be the most pleasant thing to think about, but let’s quickly talk about why your toilet clogged in the first place.

In some cases, using too much toilet paper could be the reason for the blockage. The same goes for flushing objects, like feminine hygiene products, food waste, baby wipes, and cotton balls down your toilet.

Because many objects like the above are absorbent, they expand and block the pipe completely.

Sometimes, toilet blockage occurs because you have a low-flow toilet, designed to save water. While low-flow toilets manufactured after the mid-1990s usually don’t clog, earlier models weren’t quite perfected before they went to market.

You may also deal with a toilet blockage because you don’t have enough water in your tank, making it impossible to create enough pressure to properly flush.

Toilets can also clog because of issues with hard water. This water eventually calcifies and makes it tough for waste and water to properly move through your pipes.

How to Fix a Clogged Toilet

The first step in learning how to unclog a toilet is to begin by giving it a thorough cleaning.

As long as the toilet bowl isn’t yet overflowing or close to overflowing, you can use a standard drain unclogging solution to attempt to fix the blockage. Leave the solution for about 15-20 minutes, and then flush it once the water level is close to normal levels.

One important rule to keep in mind?

Avoid pouring too much bleach down the pipes. This can often end up doing more harm than good, as bleach can release harmful fumes if there are already other chemicals in the pipes, and even damage their structural integrity.

If this doesn’t work, it’s time to break out the plunger.

Put it directly over the toilet trap (the small opening in the center of the toilet bowl) and use an even force to push and pull the plunger in and out. You’ll likely need to do this a few times.

When you spot the water level going down, the plunging method is working properly. Flush it to eliminate the blockage.

You can also try using a toilet snake for more stubborn clogs.

Put the end of the snake down the toilet trap, and slowly turn it clockwise as you continue to push it further down into the trap. This should break things up.

When to Call a Professional

You’ve used toilet drain cleaner, a plunger, and some of the other methods we mentioned above.

However, you’re still dealing with a seriously clogged toilet. The last thing you want to do is accidentally make the problem worse than it already is.

It’s time to call in a professional.

In addition to a stubborn toilet clog you just can’t fix on your own, when else should you call in a professional plumber?

If you suspect that you may have a blocked plumbing vent, it’s not something you can fix on your own. These vents stop air pressure from building up, and bring air into your plumbing. Sometimes, twigs, leaves, and even nests can block the vents.

This leads to serious, consistent clogs. An expert will be able to properly identify where the clog is located, and use the right tools to fix it once and for all.

Sometimes, the issue is much larger than your toilet or even the vent. In some cases, the true problem originates in your main sewer line.

This can happen because of a buildup of foreign objects over a long period of time, or even because of tree roots that have spread and poked holes in the sewer line.

Sewer line issues aren’t just responsible for annoying clogs. They can also seriously threaten your health. You’ll be at a higher risk for exposure to harmful bacteria, which can lead to stomach pain, vomiting, diarrhea, and serious disease.

Call in a professional right away, and never attempt to fix this issue on your own.

Need Professional Help with a Toilet Blockage?

No one likes dealing with toilet blockage, but the good news is that being proactive and taking good care of your toilet can prevent lots of these issues.

However, sometimes, there are toilet and sewage problems that you can’t — and shouldn’t — handle on your own.

When that happens, you deserve the best professional help from plumbers that will properly diagnose the problem and find a lasting solution.

Whether you suspect the issue is with your main sewer line, a plumbing vent, or if you’re dealing with a stubborn clog, we’re here to help.

Reach out to us today to get an estimate or schedule a service call.

_______________________________________

Is your toilet leaking or clogging on a regular basis? When it comes to toilet repair service, Scottsdale residents rely on Hays, the top plumbing company in the greater Phoenix area, to take care of toilet and other plumbing issues quickly and affordably! Call Hays at 602-714-8270 now to schedule an appointment!

Read Related Articles:

Toilet Plumbing Made Easy: How to Fix a Clogged Toilet

How To Fix Your Clogged Toilet: A Step-By-Step DIY Guide

7 Signs It’s Time to Replace a Toilet

Read full story at: https://hayscoolingandheating.com/clearing-toilet-blockage/

[hayscooling]

What Happens During an Air Conditioner Tune Up?

On average, homeowners in America spend around 3 percent of their home’s total value on maintenance. Failing to provide a home with the maintenance it needs is a recipe for disaster. The last thing you want is for the vital systems in your residence to break down due to a lack of care.

Maintaining a comfortable indoor temperature is something most homeowners take for granted. If you ignore the maintenance needs of your HVAC unit, it is only a matter of time before repair issues surface.

During the summer months, your HVAC unit will get quite the workout. Hiring a reputable professional to perform an air conditioner tune up can help you keep your unit reliable. Attempting to service your own unit will lead to lots of mistakes being made.

The following are some of the things a technician should do during the air conditioner tune up process.

The Air Conditioner Tune Up Should Start With a Check of Refrigerant Levels

Most homeowners are so accustomed to their HVAC unit working that they don’t know how to act when problems occur. One of the most important parts of your HVAC system is the refrigerant. Without proper levels of refrigerant, your unit will be unable to produce cool air.

One of the first things a technician will do when hired to maintain a residential HVAC unit is to check the refrigerant levels. If the refrigerant in the unit is low, chances are there is a leak that needs to be addressed.

A certified HVAC technician will have no problem finding and fixing the leak in question. Once this leak has been taken care of, the technician will top off the refrigerant in the unit.

Keeping the Condenser Coil Clean

A residential HVAC unit has both an inside and outside portion. One of the most important parts of the outdoor portion of your unit is the condenser coil. The refrigerant in your unit will pass through this coil on a regular basis.

Often times, the condenser coil will become covered in dirt and other substances due to its exposure to the elements. Allowing this part of the unit to stay covered in debris can lead to energy efficiency issues. This is why allowing professionals to clean it during a tune up is so important.

A technician will have no problem washing and cleaning the coil in a hurry. Once they are done performing this work, you will probably notice a change in your unit’s efficiency levels.

Checking the HVAC Unit’s Electrical Components

The HVAC unit in your home has a number of different electrical components. In order for your unit to come on and operate efficiently, these components will have to work correctly. During the tune up process, an HVAC technician will check the contractor inside of your HVAC unit.

When testing these electrical components, the technician will be looking to ensure that the electrical current is flowing properly. If any breaks in the electricity occur, it generally means the contractor needs to be replaced.

By detecting these issues early on, the technician can help you avoid a lot of headaches. If this contractor goes out during the dog days of summer, it can lead to uncomfortable temperatures inside of your home. The money paid to an HVAC technician for this type of work will be worth it considering the problems they can help you prevent.

Inspecting the Condenser Fan Motor

When cool air is produced by your HVAC unit, it is the job of the condenser fan motor to blow it through your vents. As time goes by, the capacitors that power this motor may start to weaken. Allowing these capacitors to go out completely will lead to the inability to get cool air into your home.

When a technician is hired to tune up a residential unit, they will spend a lot of time inspecting and testing the condenser fan motor. This is because without a functional fan, an HVAC unit will be rendered useless.

If the technician does discover problems with this fan, you need to let them perform repairs immediately. The longer you wait to get issues with a condenser fan addressed, the higher the risk becomes of it going out completely.

Flushing the Condensate Drain

Most homeowners fail to realize how much condensation their HVAC unit produces. The reason why they are unaware of this moisture is due to the fact that their condensate drain is functioning properly. As time goes by, this drainage system may begin to clog up and will need to be flushed.

Failing to flush and clean this drainage system can lead to problems like water damage and even the development of mold and harmful bacteria. An HVAC technician will have the tools and the experience needed to flush this drain completely.

As the flush the drain, the technician will inspect the drain lines to ensure they are free of mold and other obstructions. With their assistance, you can keep your HVAC unit running like a well-oiled machine.

Checking and Changing Air Filters

The cornerstone of any good running HVAC unit is proper air flow. If this airflow is restricted, it will lead to the unit getting overworked.

Having clean air filters is an essential part of keeping the right amount of air flowing through the HVAC system. This is why an HVAC technician will check and change out dirty filters if needed.

Choosing the Right Professionals to Work With

The main thing you need to do to ensure the success of an air conditioner tune up is to find the right professionals. Selecting a company with a great deal of previous experience is a wise decision?

Are you in need of professional HVAC maintenance and repairs? If so, contact us now to find out more about the services we offer.

_____________________

When it comes to air conditioning, Phoenix AZ residents look for the best air conditioning maintenance specialists to keep their units running strong, even in triple-digit heat! Our trusted professionals work hard to provide you with exceptional service at a fair price.

Call us today at (602) 714-8270 or contact us online to schedule an appointment! It Pays To Call Hays!

Read Related Articles:

What Do You Get From an Air Conditioning Tune Up?

Looking to Hire a Top Rated Heating Repair Company in Phoenix? Here’s What to Look For

Switching from Heat to Air Conditioning When Winter Ends

Read full story at: https://hayscoolingandheating.com/air-conditioner-tune-up/

[hayscooling]

When to DIY Leaking Faucet Repair and When to Call the Pros

With the DIY market now bumping up against the $14 billion mark, more homeowners and even apartment renters are getting acquainted with repairs. They find that with the help of a quick internet search, they can get a comprehensive how-to for fixing the very model of faucet or bath fixture troubling them. Leaking faucet repair or any other bathroom issue is easier to tackle than you might even realize.

Here are four simple fixes for dealing with leaking faucets or common bathroom issues and how to know when you should just call a pro.

1. Sink Caulking

If you’ve been living in your home for a while or your home is on the older side, then the caulk around your tub or sink could wear off. When that seal starts to crack and deteriorate, not only does it look bad but you could introduce mold and mildew into your walls.

To avoid water damage or plumbing issues, start by removing all the caulk that’s already all around your sink or tub if that’s your issue. Use a putty knife or carefully scrape with a razor blade. You need to remove the old caulk as thoroughly as you can to make it easier for the new caulk to bond to the surface.

Get yourself a caulk gun to apply a line of unbroken caulk all around the edge. Take your time to keep the lines neat and smooth. Make them look professional and you’ll not only be happier with yourself later, but you’re less likely to deal with leaking.

Caulk tends to dry quickly so work as fast as you can. However, if you make a major mistake, you can always start over and reapply.

If you can’t get it right, don’t leave the job half done. Call a professional to take on the issue. If there are leaks around your sink or tub after you’ve caulked, call a pro to help.

2. Replacing a Shower Head

While we all want to have clean surfaces and strong water pressure, sometimes our shower heads fail us. While most of the problems that we have with shower heads come from inadequate cleaning, shower heads need to be replaced every few years. Unscrewing the old shower head and screwing in a new one can be easy.

It can also be a challenge if the old one has rusted on or was put on too tight. You might need a pair of pliers to get the job done. You need something that can exert a strong grip around the head so that you can twist it off without damaging your pipe.

If you don’t have this, ask a neighbor if they can help out. This is such an easy fix that you might not want to call a plumber on this one. However, when you call a professional, you get service that ensures that not only will your shower head be put on tightly, but they can assess your system.

For anyone who has been dealing with water pressure issues, they can do a few quick tests to ensure that there aren’t any major issues with your shower setup.

3. Leaky Faucet Fixes

If you’ve got a faucet that has been giving you trouble with leaks, it’s easier to fix on your own than you might think. Many leaks stem from a loose nut at the base of the faucet or a drip that starts at the spout.

Some fixes are pretty straightforward and easy while others are a bit more challenging. Depending on your faucet, you could be facing a day-long repair.

Faucets with a rotary ball are a standard option you find at most home improvement stores. You can usually repair these easily but if they break, they can be replaced just as simply.

If you have a cartridge-style faucet, you might have a little more trouble getting the parts you need.

Start by shutting off the water supply. If your faucet just has a light drip, you might be able to remove the knobs and replace them, giving you full control over the fixture underneath. These fall out of place at times and make it so you can’t fully turn off the water supply.

If you’re not comfortable messing with the water line or worry about causing more problems than you can fix, that’s when you should call a pro in. Some people aren’t comfortable working on this kind of project and that’s okay. It’s better to know your limits than to take a risk.

4. Fix a Running Toilet

If your toilet is constantly running or you need to jiggle the handle to get it to stop, you need to fix it as soon as possible. It’s more than just a small annoyance, you could be wasting hundreds of gallons of water a day.

This is a sign that your stop valve is broken, your floater valve needs to be replaced, or that your chain is busted. Check to see if there’s a clear issue that something is broken. Most of these parts can be picked up at any standard hardware store.

To get the job done, start by shutting off the water supply. Then replace the setup as it looks to you now.

If you can’t get your toilet to flush, then the trap might be clogged. This is when you should call a pro to help you out.

Leaking Faucet Repair Could Be Easy or Not

Depending on the type of faucet you have or the age of your fixtures, leaking faucet repair could be a breeze. As long as you shut off the water supply in advance, you should be able to fix your faucet without causing a mess. If you feel overwhelmed, that’s when you should contact us for help to keep you out of trouble.

_______________________________________

Are you having problems with a leaking faucet? The Scottsdale plumbing repair experts at Hays can take care of any leak, big or small. Contact us online today or call 602-714-8270 to get your pipes taken care of!

Read Related Articles:

  Best Quality Kitchen Faucets [Shopping Guide]

Unblocking Drains in Your Home: A Plumber’s Ultimate Guide

Top 10 Common Plumbing Problems and How to Fix Them

Read full story at: https://hayscoolingandheating.com/when-to-diy-leaking-faucet-repair/

[hayscooling]

What You Need to Know About Upgrading to a Tankless Water Heater

Did you know that a tankless water heater can be 24% to 34% more energy efficient than your old storage tank water heater if you use about 41 gallons of water a day? (That’s about two ten-minute showers worth of water, by the way.)

Double your water usage to four showers a day and the numbers go up by 8% to 14% when you replace your water heater with a tankless water heater installation. If you set up tankless water heaters for multiple appliances you can get up to 50% more efficiency from your water heater!

That’s a big drop in your utility bill! But it has to be done right. So how do you make sure to get the right tankless water heater for your home specifically? And how do you install and maintain it properly?

Your plumbing professional can guide you, do the installation and come up with a maintenance plan, but it’s helpful to be informed so you can work with the professional in making choices to ensure the most efficiency and cost savings from your “on-demand” water heater.

To help you get the gist of what’s involved, we’ve put together a list of tankless water heater installation and upgrade basics.

1. The Right Tankless Water Heater for Your Home

Size

A tankless water heater heats the water as you go.

Energy is saved and you don’t run out of hot water for that nice, relaxing hot shower or when the whole fam is racing out the door in the morning. That is, unless you have multiple showers, faucets and/or appliances going all at once and your little tankless water heater that could can’t keep up.

That’s why you need to look at your household water use and talk to your professional to pick the right model. Gas-fueled models, for example, can heat more water faster than electric models.

But even the ones with the biggest output sometimes fall short. That’s when you might put two tankless water heaters next to each other or dedicate a tankless water heater to the big-use appliances, like dishwashers, that hog the hot water.

Purpose

You might also consider an additional tankless water heater if you have a remote bathroom in a guest house, for example, or as a booster to a solar-powered water heater.

Fuel Source

Speaking of alternate energy sources, you will need to choose a tankless water heater that works with the type of energy you want to use and that you have available. Tankless water heaters work for gas, natural gas, and electricity.

As mentioned, the gas-fueled models can push through more water, but some of them have a standing pilot light, which means it’s on all the time and uses more energy. Some do have intermittent ignition device (IID) that spark on the gas flow as needed.

Local Building Code Requirements and Permits

Be sure to check local building codes to make sure you get a model that will work for your home and location. Your plumbing professional should know these codes from experience and be able to advise you.

Sometimes you’ll need a permit. If so, your professional should get it for you.

2. Tankless Water Heater Installation

Location

Tankless water heaters are much more aesthetically pleasing than their behemoth counterparts. You know, because you want your garage or storage area to look nice and organized, right? And did we mention space yet?

No giant tank means a small box that you can put on the wall in your closet, garage, or utility room. And in warmer climate areas like Arizona, you can hang it on the wall outside!

Ventilation is also important. Your installer will advise you on that as well as on the best location with regards to the piping. The closer to the appliance, the faster the hot water arrives.

The Right Fit

Sometimes when going from the big tank water heater to a tankless version, you will need to alter some basic components for compatibility. For example, if your tankless water heater uses gas and burns it faster than your old water heater, you may need to install a larger gas line to bring in more gas faster.

Exhaust is another consideration. You may need a new “chimney” or system for exhaust, as well as ventilation, depending on the location.

Water

The water supply in Arizona is primarily considered “hard water.” And hard water can cause scaling in the tankless water heater which can cause problems for the heat exchanger.

The solution is to soften the water before it goes into the water heater. Be sure to have your installer address tankless water heater plumbing and set up a system or talk to you about regular maintenance service to descale the water heater.

Thermostat

You can set the thermostat lower to increase energy savings. A good typical temperature is 120 F. If it’s higher, like 140 F, it can cause scalding. Set it high and it can cost you up to $400 a year.

Insulation

Sometimes you can save energy if pipes are insulated. This may require additional work if your new water heater is in a new location and you can’t use the old pipes.

3. Options for Combined Energy Efficiency Savings

It’s easy to boost your tankless water heater energy savings. Here are a few tips:

Be sure to fix any leaks as soon as they start. A small drip will cost you about $1 a month.

Use energy-saving appliances.

Set your temp at the right level.

Use low-flow faucets and shower heads. Ask your professional for advice on the best quality flow system so clogs don’t happen to slow down water pressure.

Use cold water when you’re doing the laundry.

4. Maintenance Plan

Your tankless water heater should last about 20-plus years and that can be easily and significantly extended with regular maintenance. Keep up with service to keep efficiency high.

Take a look at the manual for specific recommendations for your model and talk your plumbing professional to set up a plan. Remember to discuss cleaning and descaling if that’s an issue.

Lastly, replace parts as needed to further extend the life of your unit. The good news? The parts for tankless water heaters are easy to replace.

The Little Water Heater With the Power Punch: You’re Ready to Go

Now that you know what’s involved with an upgrade and tankless water heater installation, you’re ready to contact a professional to find the right model for your Arizona home and get started. While you’re at it, find out if there are any local tax credits and rebates for energy-efficient water heaters. Please contact us for questions or a consultation.

_____________________

Do you need to replace your broken or under-performing water heater? Would you like to save money on energy bills? We specialize in energy-efficient traditional and tankless water heater installations. Our trusted Scottsdale water heater replacement professionals work hard to provide you with competitive pricing and unparalleled service.

Call us today at (602) 714-8270 or contact us online to to schedule an appointment! It Pays To Call Hays!

Read Related Articles:

Which is better: Traditional Hot Water Heater vs Tankless

When Do You Need a New Water Heater Installation in Phoenix?

A Homeowner’s Guide to the 5 Most Common Types of Water Heaters

Read full story at: https://hayscoolingandheating.com/upgrading-tankless-water-heater/

[hayscooling]

Switching From Heat to Air Conditioning When Winter Ends

Winter is passing and summer is just around the corner. It’s an exciting time, and you’re probably looking forward to days at the beach and time spent in your back yard.

But you can’t neglect your household maintenance, especially with regards to switching from heat to air conditioning.

Here are a few essential tasks you need to ensure your system is just as ready for springtime as you are, along with a quick guide to testing your system.

Check Your Thermostat

The first step in making sure you’re ready to turn on the air conditioner is making sure all the component parts of your system are working.

The easiest place to start is the most obvious: your thermostat.

If your heating equipment isn’t working properly, there’s a chance that the thermostat is defective. Even if the heating system is working properly, it’s important to test your thermostat to make sure everything is in good working order.

That way, you can be sure to avoid many of the common thermostat problems.

Replace Your Filters

If your thermostat is in good order, it’s time to check your filters.

Your air filters should be changed every three months or so (or as recommended by your manufacturer. Regardless, you should replace your air filters before the start of the season to give your AC unit a boost going into the new heating or cooling season.

If you’ve never changed a filter before, check out this article for tips to help get you started.

Check Your Insulation

While you’re working on the air filters, you should also spend some quality time checking on the state of your insulation.

Not sure what this means? No worries.

At the back of your AC unit, you’ll see coolant lines connecting the unit to your home. These coolant lines should have insulation on them to protect them against wear and tear (and to protect your system from leaking coolant).

If the insulation is missing, cracked, frayed, peeled, or otherwise in a state of disrepair, make sure to get in touch with your local HVAC repair contractors to fix it ASAP.

Check Your Drain Line

While you’re checking your coolant lines for insulation, you should also make sure to check your drain line.

Typically, there is a drain near your indoor cooling coil. If you periodically flush a cup of chlorine bleach down your drain and flush it with a gallon of water, you can keep your drain line clear for the season (which allows your unit to work more efficiently).

This might not seem like a big deal until you consider what happens if your drain line becomes clogged.

The whole point of the drain is to remove water from your system. If the drain gets clogged, that water still has to go somewhere. You’re just not going to like it, because it usually means serious water damage.

Inspect Your Outdoor Condenser Unit

On the topic of blockages and avoiding them, it’s equally important that you check your outdoor condenser unit for any potential blockages.

There should be no blockage in the unit and no debris around the unit, either–both are equally detrimental to the function of your system. Any leaves, dirt, or similar debris can interfere with interior components and prevent your unit from functioning properly.

To that end, make sure that the unit and the area around it are both clean and clear. You should also check for any missing or misshapen panels (these panels are meant to enclose electrical components and protect them against the elements–if a panel is missing, these components could be damaged).

Schedule a Tune-Up

If you’re not sure where to begin with your AC unit (or if you spot more than one problem with the unit) it’s time to schedule a tune-up.

Even if your unit seems to be working fine, you should have an HVAC professional visit your home at least once a year to make sure your system is in good working order.

It might seem like a waste of money if your system is already working, but doing regular checkups helps ensure that your system is running safely and efficiently. Not only does that help protect your home, but it also helps you save money.

Know Your Unit’s Retirement Age

Sometimes, though, taking care of your unit before switching over means more than just regular maintenance.

Sometimes, it means replacing your unit altogether.

Like anything else, AC units have a retirement age (or, at least, a period of maximal efficiency) and once they pass that age, they’re no longer doing everything you need them to.

And that will drive up your energy bill in time, on top of putting you at risk of potential hazards.

Even if your unit has been properly maintained, it will wear out eventually. The key is knowing when it’s time to say goodbye. Fortunately, the right HVAC company can make the installation process quick and easy.

Switching Over

If you’ve done all of that maintenance work, then you’re ready to start switching from heat to air conditioning.

Start by lowering the temperature of your thermostat to the desired level and turn the system “on” at the thermostat. Then, go outside and listen to the fan in your condenser. It should sound steady, and the air coming out of the top should feel warm (as the unit is removing warm air from your home).

Tips on Switching from Heat to Air Conditioning

Are you ready to start switching from heat to air conditioning?

You’re definitely ready for the summertime, but if you’re still not sure about the intricacies of your heating and cooling system, there’s nothing wrong with hiring experts to help you out.

If you need repair, maintenance, or an estimate, don’t hesitate to get in touch.

_____________________

Is your air conditioner ready for the warmer weather? If you’re not sure, get in touch with Hays, the air conditioning and heating maintenance specialists, to keep your HVAC system running strong for years to come. Our trusted professionals work hard to provide you with exceptional service at a fair price.

Call us today at (602) 714-8270 or contact us online to schedule an appointment! It Pays To Call Hays!

Read Related Articles:

What Do You Get From an Air Conditioning Tune Up?

Looking to Hire a Top Rated Heating Repair Company in Phoenix? Here’s What to Look For

Furnace Maintenance Checklist for Phoenix Homeowners

Read full story at: https://hayscoolingandheating.com/heat-to-air-conditioning/

[hayscooling]

A Homeowner's Guide to the 5 Most Common Types of Water Heaters

Has your old water heater given out completely? Are you thinking of a replacement because it is almost reaching the end of its life? Or, do you need to upgrade your hot water system to meet the increased need for hot water in your household? No matter the reason why you need a hot water system replacement, it’s important to get the right appliance.

Before you start shopping for your next water heater, you should know that not all water heaters are the same. There are many different types of water heaters in the market, and choosing the right one for your Phoenix or Scottsdale home can be confusing. But if you understand the options available to you, making the right decision needn’t be hard.

This guide discusses the 5 most common types of water heaters available to homeowners like you. Regardless of which type of water heater you choose for your home, having a maintenance program for your system is vital. Proper maintenance will ensure you enjoy reliable and efficient service from the system.

1. Conventional Water Heaters

If you’ve been getting your hot water from a storage tank, then you’re probably replacing a conventional water heater. This type of water heater is also known as a storage tank water heater because the heated water is stored in a large tank.

Older models of conventional water heaters are notorious for using too much energy, but newer models are designed to operate more energy-efficiently. If you’re looking to replace your conventional water heater with a newer model of the same type and energy source, expect your new hot water system to consume less energy regardless of whether it runs on electricity or natural gas.

Although conventional water heaters running on natural gas typically cost more to install than their electric alternatives, they cost less to operate. This makes them a more economical option for your home.

All storage tank water heaters require periodic draining and cleaning to remove sediment and also improve the efficiency of the system.

2. Tankless Water Heaters

These hot water systems don’t feature a storage tank. The omission of a tank from the hot water system is perhaps what appeals to homeowners the most.

Tankless water heaters only heat water when the need arises. This explains why they’re also referred to as on-demand water heaters. Supplying water on-demand basis can lead to significant energy savings in your household, and cut energy bills.

Although tankless water heaters operate more efficiently than their conventional counterparts, they’re generally more expensive to install. If you’ll be ditching your storage tank water heater for a tankless model, you should think about the additional expenses of retrofitting your home plumbing and electrical system to accommodate the new hot water system.

Another advantage of tankless water heaters worth mentioning is that they save space. Unlike conventional water heaters, they don’t require space reserved for tank installation.

3. Heat Pump Water Heaters

For homes located in areas with moderate climate, heat pump systems are an energy-efficient way to control indoor temperatures. But are you aware that these space-cooling equipment can also provide hot water?

Like a conventional water heater, a heat pump water heater uses a storage tank to carry hot water. But the operating mechanism of this water heater is much different from that of a conventional water heater.

Heat pump water heaters use electricity to move heat from one area of the home to another. The hot water system then absorbs heat from the air and transfers it to the cold water in the storage tank at a higher temperature.

Even though these water heaters are costlier to install than their electric-only counterparts, they’re cheaper to operate over the long term.

4. Condensing Water Heaters

Like conventional and heat pump water heaters, these hot water systems feature a tank. But they rely on combustion gases that are typically expelled from a home via the flue to provide hot water.

There’s a coil located at the bottom part of a heat pump water heater, where cold water enters the storage tank. The coil absorbs the heat carried by the exhaust gases and uses it to heat the cold water.

If you already have a gas-fired furnace or boiler in your home, you should consider installing a condensing water heater in your home. This is because you’ll be able to minimize energy losses that normally results from operation of the heating equipment.

5. Solar Water Heaters

So far, all the above-discussed hot water systems cost money to use. But what if you could get your hot water supply free of monthly energy bills? Solar water heaters eliminate monthly energy expenses because they use solar power. If you’d like to enjoy this benefit, you’ll need to install solar panels in your home.

Solar panels will produce the electricity required to power up your water heater. But they’re usually expensive to install. The good news is that there are solar incentives and rebates you can take advantage of. These incentives can include state and federal tax credits and rebates.

Check out which Arizona solar tax incentives are available for homeowners like you.

Which of These Types of Water Heaters Is Best for Your Home?

Choosing a hot water system replacement is a decision you’ll want to get right the first time. In determining the best water heater for your home, you need to consider the needs of your household, as well as the energy consumption of your hot water system. In this regard, make sure you check the energy rating of your water heater before buying it.

Now that you’re familiar with the different types of water heaters available for homeowners, you should be able to pick the best one for your Arizona home. But if you’re still on the fence about which type of water heater to get, you can always contact us to discuss your hot water needs. We’ll be glad to help you select the best water heater for your home.

_____________________

Do you need to replace your broken or under-performing water heater? We specialize in traditional and tankless water heater installation in Phoenix. Our trusted professionals work hard to provide you with exceptional service at a fair price.

Call us today at (602) 714-8270 or contact us online to to schedule an appointment! It Pays To Call Hays!

Read Related Articles:

When Do You Need a New Water Heater Installation in Phoenix?

How Long Does a Water Heater Last?

Which is better: Traditional Hot Water Heater vs Tankless

Read full story at: https://hayscoolingandheating.com/common-types-of-water-heaters/

[hayscooling]

7 Common Thermostat Problems and How to Fix Them in Phoenix AZ

A programmable thermostat can save you up to 10-20% on your energy bill. That is if everything in your heating and cooling system is working together. Diagnosing a furnace can be really overwhelming for anyone unfamiliar with them.

If you live in a climate with extreme weather conditions, those air conditioning service calls can add up. Troubleshooting the thermostat is one of the most accessible ways to solve HVAC problems by yourself. Use this maintenance guide as a process of elimination to see if thermostat problems are the culprit.

Here are seven suggestions to get you started.

1. Not Enough Power

A wireless thermostat that isn’t keeping programmed settings or lacks a battery indicator could be low on power. Try replacing the batteries to see if the HVAC system starts switching on and off properly. Alkaline batteries usually don’t last much longer than a few months, so go for high-capacity Lithium.

If there is no power at all going to the thermostat, check the power switch in the HVAC closet. After that, you can deduce that it may be a blown fuse or breaker.

2. Improper Voltage

Did you just purchase a new thermostat? Even if it’s a modern digital thermostat, it could be rated at an improper voltage. This is especially true for commercial air conditioning systems. Your thermostat needs to be rated at the voltage capacity of your furnace.

If there’s not enough voltage running from the thermostat, temperature readings and signals can be lost. The best way to match the proper voltage is to ask an HVAC pro or take it into a local hardware store.

3. Faulty Wiring

Older homes and buildings are vulnerable to dry rot and fraying of electrical wiring over time. This is a common problem with older thermostats. The connections and electrical contacts can degrade over time and produce intermittent service.

Don’t try to mess with the wiring on your own, it’s best to hire a professional to repair or replace your thermostat.

4. Heat Anticipator

This next component of the thermostat might be a little tricky. Inside the thermostat is a small electrical metal piece that regulates the heat pump and tells it to cycle on and off. If the heat anticipator isn’t calibrated correctly, your temperature reading will always be off.

Adjustments to heat anticipators only apply to older mechanical thermostats. Digital thermostats all use embedded anticipators that are automatically controlled and adjusted. If you have the metal coil inside, yours is mechanical.

If you have a mechanical thermostat, you can test out the anticipator by nudging it lightly to either side. If that allows the thermostat to switch on, then it might still be good. If the problem persists, consider swapping your thermostat for a digital one.

5. Dander and Dust

Over time, your thermostat can collect floating debris, especially between the wall and the unit. Dust and pet dander are common problems with thermostats. You should try to clean your thermostat and the interior components every year.

You can do this with a can of compressed air or a high-quality microfiber cloth. You’ll need to be careful and gently clean the coil that controls the temperature. Do not apply any pressure on it because if you bend it, you’ll throw off the readings.

To clean contacts, slip a piece of paper between them. Slowly move the paper back and forth until you don’t see any more dust.

6. Temp Readings Off

If your air conditioner seems to turn on at the wrong times, it could be located in a poor location. This can be a big issue with large business complex buildings. Your thermostat should be located in the center-most location, away from windows and doors that can let in hot air.

Also, consider which wall it is mounted onto. Ideally, your thermostat should be on an interior wall facing north or south. That way, throughout the day the sun will be evenly heating the location with the thermostat.

Watch for space heaters and surrounding electrical equipment that can radiate a lot of heat, too.

7. Bypass the Settings

Sometimes programmable thermostats can go haywire and your settings may be causing all your problems. To test this out, you should try inputting a specific temperature that you want the building to be. Force it to turn on by pressing the hold button. If that doesn’t work, consult the owner’s manual for your thermostat.

Determine if this reading is accurate by purchasing a cheap thermometer to compare. This should tell you if the location and settings are working as they should. If it does check out, you may need to start looking into insulation issues.

AC Maintenance and Repairs

With proper maintenance, HVAC units should last around 20 years. The key is not allowing problems to take a foothold. Not changing filters on-time, not utilizing programmable settings, and not getting regular servicing can all make your air conditioner run harder.

Thermostat problems add to the likelihood of things breaking down over time. Sure, your air conditioner may work okay if you turn it off and on manually, but is it running efficiently? For commercial air conditioning systems, small problems turn into big expenses in a hurry.

Diagnose and Treat Thermostat Problems

Protecting your investment and avoiding thermostat problems is as easy as hiring a professional AC service provider. Hays Cooling, Heating and Plumbing strives to provide a maintenance service that is tailored to each client’s needs. Whether you live in a studio apartment or own large office complex, you’ll get the best prices and expert diagnoses.

At Hays Cooling Heating and Plumbing, we know the importance of preventative maintenance to keep costs low and HVAC systems running smoothly. Emergency repairs are also offered for same-day turnarounds, so your business or personal life doesn’t come to a stop. Our experience and access to a wide range of tools and AC parts allow us to turn any big job into an easy repair.

Contact us today for a free consultation to find out how you can improve your heating and cooling system and start enjoying the savings.

_____________________

 Sometimes heating or cooling  problems are as simple as a faulty thermostat. In this case, look no further than Hays! Our trusted HVAC experts know how to accurately diagnose, and, if needed, replace thermostat units. Call us today at (602) 714-8270 or contact us online to to schedule an appointment! It Pays To Call Hays!

Read Related Articles:

The Benefits of Upgrading to a Nest Thermostat

5 Ways to Reduce Heating Costs in the Colder Months

Furnace Maintenance Checklist for Phoenix Homeowners

Read full story at: https://hayscoolingandheating.com/common-thermostat-problems-phoenix-az/

[hayscooling]

Dirty Showers: 6 Expert Tips for Preventing a Clogged Shower Drain

A clogged shower drain is one of the most common plumbing issues you can deal with, whether you’re a homeowner or a renter.

Do you find yourself trying to unclog your drain on a regular basis? Are you tired of standing in six inches of water whenever you take a shower?

If you’re struggling with a clogged shower drain, it’s important to figure out what’s causing it. Then, you can take steps to avoid it in the future.

Not sure what’s clogging your drain? Don’t worry, just keep reading. Here are six tips that will help you prevent a clogged shower drain.

1. Invest in a Hair Catcher

If you have a clogged shower drain, loose hair is almost always the culprit.

There’s not much you can do to prevent your hair from coming loose while you’re washing it in the shower. It’s a natural part of life. But, you can keep your hair from getting caught in your drain.

The easiest way to do this is to invest in a hair catching device.

This is an inexpensive plastic tool that sits over your shower drain. It features several small holes designed to let water flow through. But, it also catches the hair that falls out when you’re showering and keeps it from going down the drain.

When your shower is over, you only have to remove the hair catcher, clear away the hair, and throw it in the trash. Problem solved!

2. Change the Way You Use Body and Hair Oils

Most people think of oil as being a common cause of clogged drains in the kitchen. But, it can also contribute to clogs in your shower drain.

You may not be using vegetable oil or olive oil in the shower. But, are you rinsing off body or hair oils? These products, like cooking oils, can stick in your shower drain and lead to clogs.

Does this mean you have to give up your favorite hair or body oil? Not necessarily. You only need to change the way you use it to avoid needing to rely on regular drain cleaning services.

Instead of putting the oil on your skin or hair and then rinsing it off in the shower, try applying the products after you’ve showered and dried off. Then, they can soak in fully and won’t get rinsed down the drain.

When you use them this way, you get way more out of your products. And, they don’t clog up and damage your shower drains — it’s a win-win!

3. Avoid Activities that Clog the Drains

How often do you empty the bucket into the bathtub or shower after you’ve mopped the floor or washed your car? Or dumped carpet cleaning liquid down the drain?

These are common practices, but they’re not doing your drains any favors.

If you do any of these activities on a regular basis, you could be clogging your shower drain up with dirt, dust, pet hair, and other debris.

If you have nowhere else to empty your buckets, at least place a mesh screen (or even your hair catcher) over the top of your shower drain. This will catch the dirt, pet hair, and debris and keep it from sticking in your shower drain.

When you’re finished, empty the contents of the screen into the trash. Then, wipe out the shower or bathtub to keep your drain clear.

4. Clear Your Drains on a Regular Basis

Regular maintenance is one of the best steps you can take to prevent clogged drains.

When was the last time you cleared out your drain for the sake of keeping it clean (not because your tub was filling with water faster than a rowboat with a hole in the bottom)? Can’t remember? Well, that might be part of the problem.

Cleaning your drain out on a regular basis will help you avoid clogs and keep the water flowing smoothly.

So, how often should you be cleaning them? For most people, cleaning out the drains once a month is plenty.

If you have a lot of hair, or if you share a bathroom with lots of people, you may need to clean the drain more often.

5. Keep Vinegar or Baking Soda in Your Bathroom

Another great way to maintain your shower drain and keep clogs at bay is to keep a bottle of white vinegar or a box of baking soda in your bathroom. Both of these products do a great job of keeping drains clear.

If you’re using white vinegar, pour a half a bottle down the drain once every few months. Let the vinegar sit for about ten minutes. Then, let the hot water from the shower run over it for a few minutes to clear out any clogs that are beginning to form.

Don’t like the smell of vinegar? You can use baking soda in the same way. Pour it down the drain and rinse with hot water. This will neutralize odors and help to break down clogs so they will rinse away.

6. Let the Water Run When You’re Finished Showering

To keep your drains clear, try letting the water continue to run after you’ve finished showering.

This is a simple act that will help push any hair that escaped the hair catcher down the drain and keep it from getting stuck.

Worried about wasting water? Keep in mind that you don’t have to let the water run for very long to keep the drain from getting clogged.

Letting it run for a minute is often all you need to prevent clogs and keep the water draining in an efficient way.

Need Help with a Clogged Shower Drain?

As you can see, there are lots of steps you can take to prevent future clogs. Implementing these strategies will help you keep your drain clear and your pipes working as they’re supposed to.

But, what do you do if you’re already dealing with a clogged shower drain?

If you need help unclogging your shower drain, or handling any other plumbing issues, we’re here to help at Hays Cooling, Heating, and Plumbing.

Contact us today to learn more about our services or to schedule an estimate.

_______________________________________

Are you having problems with a clogged shower drain? As the top Phoenix plumber for shower drains, the experts at Hays can take care of any stubborn clog. Contact us online today or call 602-714-8270 to get your pipes flowing again!

Read Related Articles:

How to Keep Drain Pipes Clean [Expert Tips]

Unblocking Drains in Your Home: A Plumber’s Ultimate Guide

Water Coming up Through the Bathtub Drain? Typical Causes and What to Do About It

Read full story at: https://hayscoolingandheating.com/preventing-a-clogged-shower-drain/

[hayscooling]

Water Coming Up Through the Bathtub Drain? Typical Causes and What to Do About It

It’s called a fatberg. In London, sewage workers pulled a fatberg from the drains that were reported as 800 feet long and weighed approximately 130 metric tons, the size of 11 double-decker buses.

Essentially, a fatberg is just what it sounds like, a big glob of fat that clogs drains. If you have water coming up through bathtub drains, you may have your own fatberg, too. Find out what causes this, and how to fix water coming up through the bathtub drain right here.

Why Is Water Coming Up Through the Bathtub Drain?

There are many reasons for water coming up through the drains, whether that is happening in the kitchen sink, bathtubs, or shower drains. The primary reason, however, is the fatberg.

A fatberg is a big glob of fat, that combines with oil, grease, and congealed fats along with anything else you might flush or drain down the sinks. When you are flushing materials or draining materials in your house, blocks away someone else is doing the same.

Your fats from the holiday feast you drain down the sink could congeal and combine with anything from baby wipes to paper towels that someone down the block is draining.

That’s a problem. Those little items that are drained or flushed, congeal and combine with each other to create a baby fatberg.

The more you flush or drain, the bigger the fatberg. Plumbers know these as clogged drains.

In the 2018 holiday season, the City of Arcata Environmental Services Department had to issue a press release to encourage residents to be very careful of flushing or draining these types of fats.

Other Causes of Drain Problems

Fatbergs are not the only cause of drain problems. You may also have a clogged trap in the kitchen or bathroom, a clogged vent pipe, or a clog in the main drain.

The clog may not even be coming from your own home, but somewhere else in the system. This is rare, but problems from other homes could cause a clog in the main drain.

There is a trap in the plumbing of both your bathroom and kitchen and these traps are meant to keep sewer gas from coming into the home. There is always a bit of water here, but sometimes these traps experience a hair buildup, and this could also lead to a clogged drain or water coming up in the bathroom tub or sink.

When the hair builds up, it can restrict the water flow. This is a very common cause of water coming up the bathroom drain.

In some neighborhoods, main drains are also on a steep pitch and don’t drain as quickly as we would like. This is sometimes another cause of water coming up in the bathroom.

Clogged vent pipes are another cause as well. The vents take in air to ensure the plumbing flows well. It can happen that rodents or bugs get into the venting through your roof. This could lead to a clog as well.

So if you have water coming up through bathtub drains, know you are not alone. Sometimes the particles like hair and dirt are able to just wash away into sewage systems. And sometimes they cling to fatbergs and make a big mess.

Cleaning solvents like Drano or Liquid Plumber aren’t always effective in removing these fatbergs. When they don’t work, you see water coming up through the pipes, and there’s only one place for that yucky water to go. Here’s why.

How Your Home Plumbing Works

Your home plumbing system is shaped like a tree, with many branches. When you pour something down any drain, such as grease or hair after you wash it in the sink, those items travel down the drains.

Each branch of the plumbing tree in your home is attached to additional drain pipes outside the home. Outside the home, there is the main drain for the entire neighborhood and additional tree branches off of that.

The branches inside your home will collect what you flush down the sinks and will attempt to move it towards the main drain. When the main drain receives that water, it moves it towards the city septic tank or sewer system.

This is why a clog or fatberg can occur anywhere in your home. If you flush something down the kitchen sink after a big meal and then wash your hair in the bathroom sink, it’s all moving through the same main line towards the outside main drain.

Then if there is too much poured down the drain, a clog can occur. In the home, something you poured down the kitchen sink can clog the bathroom drain.

This is why you might see water coming through the bathroom drain. But it is more likely if you see this water that there is a clog in the somewhere in the bathroom pipe system.

Because it’s already moved with other water from other areas in the home, when it comes up through the drain, it might smell or be dirty. When the pipe is clogged, and additional water is poured down, it only has one place to go. Up.

So you’ll see water coming up through bathroom drains when this happens.

How to Fix Bathroom Plumbing

The first way to keep your bathroom plumbing in good working order is prevention. You may see signs in restaurant restrooms not to flush anything that is insolvent down the toilets.

Learn how to keep drain pipes clean for future reference.

That’s because those things cause clogs or fatbergs when they combine with restaurant garbage. So the first thing to do is not flush anything down the drain that isn’t water soluble.

You even need to be very careful about grease and fats going down the drain, in any area of your home.

Your first instinct is to plunge the problem when water is coming through the bathroom drain. You may also want to use a cleaner such as Drano or Liquid Plumber, or try a home remedy such as vinegar or baking soda.

In some cases, those products will dissolve the fatberg and resolve the problem. But that isn’t always the case. Many plumbers will even tell you that they just won’t work.

Another method of resolving clogs is cleaning out the J-trap that is underneath your bathroom sink. But if you have water coming into the bathtub, that’s a sign of a much bigger problem, due to the tree branches of the plumbing system of your home.

Plumbers advise of many methods of unblocking drains in your home. But due to how clogs can affect the main sewage system, they will almost always recommend calling them first.

A visit from the plumber to resolve a simple clog is more affordable than many homeowners think today.

Call the Experts

When you have water coming up through the bathtub drain, you have serious water and plumbing problem. The first instinct as a homeowner is to try plunging it yourself or using chemicals to resolve the problem.

In many cases, this makes the problem worse. It’s important to remember the tree system that your home plumbing system consists of.

Plunging the problem could actually send the fatberg or clog to somewhere else in your home.

At the same time, even temporary fixes could still send dirty clogged water into your bathroom or kitchen. Schedule a repair as soon as you can, and you will find solving the problem with an expert is affordable, fast, and safe.

_______________________________________

Is there a fatberg lurking in your pipes? Whether it is an annoying minor clog or sewer emergency service in Phoenix, the experts at Hays can take care of any stubborn clog. Contact us online today or call 602-714-8270 to get your pipes flowing again!

Read Related Articles:

How to Keep Drain Pipes Clean [Expert Tips]

Unblocking Drains in Your Home: A Plumber’s Ultimate Guide

How to Clear a Main Sewer Line Clog

Read full story at: https://hayscoolingandheating.com/water-coming-up-through-the-bathtub-drain/

[hayscooling]

5 Surefire Signs You Need a Heat Pump Repair in Phoenix

The weather’s freezing outside.

Come to think of it, it’s not so warm inside anymore either.

You jig the temperature setting on your heat pump. Nothing. All of a sudden you notice a clicking sound from inside it too. And then you recall that giant energy bill from last month.

It’s time for a heat pump repair…

Thankfully heat pumps last a long time. Indeed, according to Evergreen Energy, they can now last between 20-25 years before they need replacing. That’s some serious longevity.

However, replacing is one thing and repairing is another. And like any mechanical item, heat pumps are bound to run into issues along the way.

For such an integral part of a household, any mishaps or breakages are bound to be problematic. But how do you know when your pump needs repairing?

Keep on reading to discover 5 tell-tale signs that you need a heat pump repair in Phoenix.

5 Signs for Heat Pump Repair in Phoenix

Let’s go through 5 warning signs that indicate your heat pump probably requires repairing.

Be aware that the issues below can all indicate that your heat pump actually needs replacing. However, they can equally just indicate faults that can be repaired.

Whatever the issue, be sure to act quickly and speak with a professional to limit the damage done. This way you’ll give yourself a better chance of saving money by needing repairs alone.

1. Ever Increasing Energy Bills

Are you paying through the nose for energy that once cost considerably less?

If everything at home is the same, apart from the energy bill, the heat pump may be to blame.

Don’t be too quick to point fingers. Be sure to audit your energy consumption and external factors (such as the weather) first to see if any other changes you’ve made could explain the sudden spike in price.

At the end of the audit, it might become clear that your pump is indeed the culprit…It often is.

Thankfully there are certain things you can do to improve/restore the efficiency of your pump. You can try cleaning/replacing the vents and filters, for example. But the easiest thing to do is to call a repair person to come to take a look for you.

They might say you can fix the problem with minimal fuss or through general maintenance work.

This is one case where the problem could also be more serious, or the pump may be old and past its best, meaning it needs to be replaced.

2. Faulty Heating or Cooling

Obviously, the primary purpose of your pump is to provide hot or cold air, as required.

If that ain’t happening, you may have yourself a broken heat pump. FYI, this is actually one of the most common problems you’ll come across- especially if your pump’s old and decrepit.

Say for example you’ve set the temperature to a certain level of hot or cold.

If the weather’s too hot but the pump isn’t pumping cool air as per its setting, you’ll want to get that checked out. And vice versa too- if you’re getting no warm air in cool weather settings.

It isn’t necessarily the end of the pump. But it could indicate serious issues that need to be addressed and repaired.

3. The Air Ain’t Pumpin’ Properly

Likewise, a lack of air obviously isn’t great either.

The temperature settings may be set and working correctly (unlike the problem above). But if the air supply isn’t sufficient then you’ll quickly notice changes in temperature in your home.

It could just be the filter (give it a clean!), but it could also be time for a pro to come and take a look.

4. It’s Making Strange Noises

Any heat pump worth its salt should run smoothly, quietly and without fuss.

It should be a gentle hum in the background that you eventually forget about altogether.

Meaning there’s probably a problem if, all of a sudden, you hear a rattling, or a shaking, or any other unusual sounds erupting from your pump. Equally, if all goes quiet and there’s no noise at all, there could be a problem too.

Dodgy sounds usually indicate a problem somewhere inside the mechanism. Remember, a fully-functioning heat pump should run smoothly and quietly.

The sound itself could come from numerous mechanical defects, including faulty vents, filters or motors. Regardless of the source, you should search quickly for a solution and seek out a professional repair.

5. It’s Constantly Malfunctioning

All heat pumps require servicing and maintenance to keep them running properly.

Indeed, it’s recommended that you get a service at least once a year anyway, even if there’s no obvious issue. Taking this preventative approach gives you the best chance of both ensuring the longevity of your pump and catching potential problems early.

Pay attention if your pump plays up constantly throughout the year. Ongoing problems probably mean it’s time for a proper repair job.

Remember: you can’t afford to wait too long for a repair that needs doing. It’s always more cost-effective to nip any issue in the bud early.

Time to Wrap Up

And there you have it: 5 reasons you need a heat pump repair in Phoenix.

Like all mechanical objects, you’re guaranteed to run into problems over time with your pump. However, by looking and listening out for particular signs you can be sure to get the appropriate repairs in time to prevent the need for a full replacement.

Your heat pump almost certainly needs a repair if it’s no longer regulating the temperature in line with its settings, isn’t emitting enough air, is making funny noises, is causing your energy bill to skyrocket, or is a constant issue at home.

We hope this newfound knowledge will help you seek out the heat pump help you need!

Now we’d like to hear from you! What problems have you noticed with your pump? Drop us a comment below to let us know.

And be sure to contact us to see how we can solve your heat pump problems in Phoenix!

Are you concerned about your heat pump? If so, get in touch with Hays, the heat pump specialists, so you can have peace of mind your heater will be running strong. Our trusted professionals work hard to provide you with exceptional service at a fair price.

Call us today at (602) 714-8270 or contact us online to to schedule an appointment! It Pays To Call Hays!

Read Related Articles:

8 Reasons You Should Schedule Your Heater Inspection Now in Phoenix

5 Ways to Reduce Heating Costs in the Colder Months

Furnace Maintenance Checklist for Phoenix Homeowners

Read full story at: https://hayscoolingandheating.com/heat-pump-repair-in-phoenix/

[hayscooling]

Top 7 Signs of a Sewer Drain Clog

Are you worried that your drainage system is on its way to getting clogged?

If you dispose of your waste in an appropriate manner, then you shouldn’t worry about getting a clog any time soon. However, a sewer drain clog sometimes happens without warning.

Often, it’s because your neighbors don’t practice good waste disposal habits.

Simple acts like flushing foreign objects down the toilet or grease down the drain can sometimes clog entire city sewers. Other instances of clogs happen because of time passing, causing pipes to corrode and such.

Whatever the reason may be, once a clog happens, it’s going to be a pain to deal with. So, you need to stay one step ahead and nip the problem in the bud before it becomes worse.

Below are 7 telltale signs that point to a clogged drain. Read on to find out what they are.

1. Clogged Toilets

The first thing that often gets affected by clogged sewer drains are the toilets. Toilets often gurgle out dirty water when clogs happen. They also begin to make noise and often they bubble out gases from the sewers.

Most toilets also react when sinks, bathtubs, washing machines, and other household objects begin to pump water into the drain. Often, the toilet will fill up with more water than normal. If you notice this happening, then you can be sure there is a clog in the sewer drain.

Sometimes, it can only be your toilet having problems. So, it’s best to check if your toilet’s drain is the only one clogged before making any assumptions. A plunger is the best tool you can use in unclogging a toilet, a few pumps tend to be enough to push the clogs to the sewers.

Plumbers snake is also a great tool to unclog your toilet without a plunger. It reaches deep and can loosen the blockage enough to break it off of your pipes.

2. Jutting Tree Roots

Sometimes, your sewer drain system may stay in perfect working condition for years. Then you’ll start to notice it wane in its efficiency one day, and soon after, it stops working altogether. If this happens, check if there are any trees near the pipe systems.

Trees often have their roots penetrate the pipes if they grow big enough. It’s a slow process, but the drain pipes are not able to hold their own against the roots.

You will be able to notice trees are clogging the drains by checking the ground around them. Common neighborhood drain pipes are often buried close to the surface, roots will jut out or make bumps on the ground if they’re penetrating the pipes.

3. Noisy Plumbing Fixtures

Once a clog happens, certain plumbing fixtures often make noises. This is because it is sucking up the air to compensate for not being able to supply water.

The faucet will be the item that exhibits this best. You will start to hear a groaning noise coming from it when you turn it on. This is often followed by it sputtering some air or even dirty water. It’s also possible that it will vibrate in an unnatural way once it’s turned on.

Sometimes, the clog will be close enough to your sink that you’ll be able to use a drain auger to clear it. Before calling a plumber to take care of it, check to see if you’re able to remove the blockage yourself.

4. Noticeable Changes Around Your House

If you go out to your lawn and start to notice that some areas are changing at a rapid pace each day, it may be your house telling you that your sewer lines are in trouble.

The pipes that connect to your house often run close enough to the surface to impact your surroundings when they get damaged or compromised. These damages result in your lawn getting damaged as well.

You will see that there are bumps appearing all over the place, which mean water is trying to burst through. These bumps hold an enormous amount of pressure inside them, something minuscule like a small cut on it or even a simple nudge may be enough to make it burst.

Other times, you will see that some patches on your lawn become wetter than other areas. This means that the leak broke through to the surface.

In the event these happen to you, you should consider shutting off your water unless you want a huge water bill for the month.

5. Drains Backing Up

Having a drain back up is a common occurrence at home. Liquid drain cleaners tend to take care of the problem with ease. However, if you notice that it happens more often that it does, it may be a sign that you’ve accumulated enough gunk to cause a clog.

Liquid cleaners only soften the blockages your pipes have, they don’t melt or reduce it in any way. This means that, in the long run, enough gunk will clump together to block off the entire pipe. Call for professional help in case this happens to you.

6. A Tight Cleanout

Your cleanout can tell you if you have a clogged drain. You can find these special attachments around the outside of your house, and on rarer occasions, underneath your home like the basement or in the cellar.

If it’s outside your home, it’s safe for you to check it yourself. All you need to do is check to see if it’s loose or tight. A loose cleanout makes it so you can check the inside if there are any clogs close to it.

That said, you should watch your head if it’s tight. It means it’s holding a lot of pressure behind it. One wrong move can send it flying enough to give you a bump.

On the rare occasion that it’s underneath your home, it’s best to not disturb it. A high-pressure cleanout can flood your basement in a matter of minutes. Contact a sewer repair professional to deal with this problem.

7. Bulging Pipes

Some waste products release gases when mixed with other certain wastes. This can make pipes expand and bulge since they have nowhere else to go.

If you notice a pipe bulging around your area, contact some professionals as soon as possible. These may contain explosive or poisonous gases, mishandling them can result in a big disaster in the neighborhood.

Know the Signs of a Sewer Drain Clog Now

A sewer drain clog can become an expensive problem to deal with the longer it exists. Look out for these 7 signs and to watch out for them before they become worse!

Still thinking of ways to clean a pipe? Contact us here instead! We have the answers you’re looking for.

______________________________________

Are you searching for a “sewer and drain cleaning company near me?” to handle a pesky clog? Contact Hays Cooling Heating & Plumbing for dependable sewer and drain clog services– no matter how big or small! Email us or call (602) 714-8270 now!

Read related articles:

How to Clear a Main Sewer Line Clog

When Do You Need Sewer Cleaning Services?

How to Find the Best Phoenix Drain Cleaning Service Near Me

Read full story at: https://hayscoolingandheating.com/signs-sewer-drain-clog/

[hayscooling]

What Do You Get with a Complete Heating Tune-Up in Phoenix?

No matter what type of furnace you use to keep your home warm during the cooler months, we know you want to do what you can to protect your investment.

You’d also like to find ways to manage the costs of heating your home, without having to compromise when it comes to your personal comfort level.

In order to ensure that your heater stays in good shape, it’s important to invest in a heating tune-up in Phoenix. This won’t just extend the life of your furnace. It will also help you to prevent having to make costly and time-consuming repairs and replacements in the future.

But what does a furnace tune-up consist of, and why is getting one such an important step in maintaining your heater?

Keep reading this post to find out.

The Benefits of a Furnace Service

First of all, let’s talk about why a heating tune-up in Phoenix is such a good idea.

As you might have expected, taking proper care of your heater is a great way to lower your monthly energy bills. Remember that, if your furnace is jammed with dust, dirt, and other debris, it will have to work harder to keep your home warm.

This means that you can expect higher energy bills, but not always an improvement in your home’s temperature consistency. Plus, a heater that works too hard will also wear out its parts much faster than normal.

Of course, this will also ensure that your home’s air quality is improved, in addition to reducing the risk of a furnace fire or explosion.

Additionally, getting a regular heater check up will also ensure that you’re not stuck without heat when you need it the most. While many HVAC companies do offer emergency furnace services, they can be a bit more expensive.

This kind of preventative maintenance also extends the overall life of your heating system, which is especially key if your warranty has expired.

Finally (and perhaps most importantly) proper furnace maintenance acts as an effective guard against potential carbon monoxide leaks. Though these leaks are very rare, they can happen.

Annual inspections and professionally-installed CO detectors help to keep your family safe — and you worry-free.

What to Expect out of a Furnace Service

Now, let’s talk about what usually happens during a heater tune up.

If possible, you should take the time to describe any specific issues you’re having with a heating specialist before your annual inspection. However, in most cases, there are a few routine elements that you should expect.

Let’s take a look at them.

A Part Lubrication

If the mechanical parts of your furnace aren’t properly lubricated, they can become worn-down and inefficient very quickly.

The friction can even sometimes result in squeaking, humming, and other irritating noises. To eliminate this, and to extend the lifespan of the smaller parts of your furnace, the system will be completely lubricated.

A Filter Replacement

When was the last time you replaced your heater’s filter?

While it’s best to make the switch at least once every three months (or more often if you live in a more polluted area) few homeowners actually remember to do it.

A filter replacement has become a standard part of any furnace service. A new filter will ensure that your heater works efficiently and that the heat is able to properly circulate throughout your home.

You’ll need to replace your filter even if you haven’t turned on your heater throughout the summer months.

A Total Inspection

To the untrained eye, a furnace that seems to be working properly is written off as free from problems.

However, a trained professional can quickly identify potential issues that you’d likely miss on your own. They can also help you to determine if your system has parts that need replacement, or if it’s a better move to invest in a new furnace altogether.

During your heater check up, your HVAC specialist will perform basic troubleshooting tests, and stop any smaller issues before they get out of control.

A Gas Pressure and Pilot Inspection

Depending on the health of your unit’s pilot, the technician may need to reconfigure your pressure levels.

Especially if you didn’t turn on your heater over the summer, it’s likely that these elements have shifted out of the specification range. In order to make sure everything is working properly, the technician will make the necessary adjustments.

A Comprehensive Written Report

Finally, the inspection will end with the homeowner receiving a written report completed by the HVAC technician.

This will include a checklist of the services performed and descriptions of any areas that need extra attention. They’ll also make suggestions about future services or parts that should be replaced.

In some cases, the tech may also talk to you about ways to keep your energy bills down or make suggestions for a more energy-efficient system altogether.

Do You Need a Heating Tune-Up in Phoenix?

We hope that this post has helped you to better understand what you can expect out of a heating tune-up in Phoenix.

Remember that an annual heater check up can help you to keep your energy costs down, ensure your system is operating safely and efficiently, and extend the overall lifespan of your unit.

Of course, to get all of those benefits, you’ll need to make sure you’re working with the best.

That’s where we come in.

Learn more about the HVAC services we offer on our website, and get in touch with us to schedule your appointment.

_____________________

Are you having routine heater maintenance done to keep your heating unit running at its peak on those chilly winter nights? If not, get in touch with Hays, the home heater tune up specialists, to keep your heater running strong for years to come.Our trusted professionals work hard to provide you with exceptional service at a fair price.

Call us today at (602) 714-8270 or contact us online to to schedule an appointment! It Pays To Call Hays!

Read Related Articles:

8 Reasons You Should Schedule Your Heater Inspection Now in Phoenix

5 Ways to Reduce Heating Costs in the Colder Months

Furnace Maintenance Checklist for Phoenix Homeowners

Read full story at: https://hayscoolingandheating.com/complete-heating-tune-up-phoenix/

[hayscooling]

Why Are Bradford Water Heaters So Popular in Phoenix?

Homeowners in Phoenix and Scottsdale have come to rely on the best overall value that Bradford Water Heaters provide. While finding out it’s time to replace your water heater isn’t always great news, with new technology you may find you are saving money in the long run.

When you know you need a water heater installation in Phoenix it’s important to consider the benefits of Bradford White. Their hot water heater technology is safer, more efficient, and longer lasting than the competition.

Here’s what makes their products so unique:

Take a Look Inside of a Water Heater

Taking a look inside a water heaters reveals that not all systems are made the same. One reason homeowners and plumbing professionals choose Bradford White is the wide range of options.

Depending on your needs for usage, energy demand, and efficiency you may choose between electric, gas, and hybrid models.

Also, Bradford water heater reviews are high because they have so many models and capacities to choose from. 50 and 80 gallons, and tankless options, are a few examples.

Safety First

No matter which water heater you choose, safety has to be the biggest concern. With contents under pressure, high energy demand, and the possibility of gaseous emissions, a water heater can be a dangerous piece of equipment.

If your water is too hot, or the gauges are undependable, your family and children could suffer burns. But you could also risk fire damage and other dangers with a sub-par water heater.

Water heaters can explode or cause massive fires. With a commitment to safety first, Bradford White products protect your home and family.

Ultra Low Gas Emissions

In addition to the safety precautions about pressure and fire protection, Bradford White goes one step beyond the competition. The have developed an Eco-Defender Safety System to keep consumers and businesses protected.

These systems utilize an advanced radiant gas burner and advanced control system. The result is hot water system operations ultra-low NOx gas emission.

With Bradford White, you’ll benefit from new safety technology as well as high-efficiency performance.

Efficient Enough for EnergyStar

EnergyStar is the EPA program that helps businesses and consumers save money and protect the environment. Their information is unbiased and credible and helps all of us make decisions on the best products for our homes and businesses.

Bradford White is unique among water heaters. Beyond the dependable service, their hybrid models are EnergyStar certified.

Their efficiency delivers. Unlike the competition, Bradford White converts more of their energy use to hot water for you and your family.

Keeping your showers short is only one way to help the environment and lower your energy bills at home. With a solid EnergyStar rating, your new Bradford White system will be saving money as well.

Backed by a Great Warranty

A hot water system is the lifeblood of a home. Between laundry, showers, doing dishes, and getting grimy hands clean, all of us depend on hot water to keep our homes running right.

And while it may be an ideal time to replace a hot water system, no one likes unexpected surprises when it comes to housing budget.

The solid Bradford White warranty is another reason homeowners have come to depend on the brand. You’ll be able to predict energy bills and usage.

You’ll also know you have a dependable system for years to come.

Lined With VitraGlas Enamel

High temperatures and high pressure are great for providing your home with hot water whenever you need. Unfortunately, these aspects also can do great damage to the inside of a water heater.

The pressurized water inside your water heater can eat away the lining of your system. Without the right protection, your hot water heater might destroy itself far too fast.

Bradford White solves the longevity issue with traditional hot water heaters by lining their systems. Their water heaters are lined with VitraGlas enamel.

VitraGlas enamel will protect the interior of the water heater for years to come. By protecting the inside of a water heater with new technology, Bradford White delivers longevity.

Hydrojet Performance System

The heat and pressure inside your water heater are only a few of the dangers to the lifespan of your equipment. But another reason Bradford White water heater reviews are consistently high is because the company anticipates issues and resolves them.

Hydrojet engineering in Bradford White water heaters keeps their systems running clean and efficiently. This technology rids the water heaters of sediment.

Even small sediment deposits can impact efficiency and performance. Hydrojet technology in Bradford White systems ensures long life and great performance.

Protection Inside and Out

With all the possible risks from a water heater, it’s no wonder Bradford White has spent extra time protecting their clients. But while competitors might focus solely on the inside of a hot water heater, Bradford White goes the extra mile.

Flammable vapors from a spill outside a water heater can spell disaster when they ignite. Bradford White’s Defender Safety System heads off this danger by sensing the trouble and shutting down the system.

With the Defender Safety System, your hot water heater will have protection beyond the lining of the tank.

Match the Equipment to The Service

While finding out about the benefits of Bradford is a great start, homeowners need to go further to get the best overall value. You can’t rely on Bradford White water heater reviews alone.

To get the most from your new water heater you need the best installation and the best service to match. Your new Bradford White will be dependable and secure when installed and serviced by Hays Cooling Heating and Plumbing.

Like Bradford White, Hays has great customer reviews so you know you are getting the best service.

Find Out More About Bradford Water Heaters

No two water heaters are the same. And no two models of Bradford Water Heaters are the same either.

Knowing the great value isn’t the same as knowing which model is best for you. That’s where Hays comes in.

Our expert staff and sales service can help you find the best solution for your home. Plus, you will have the comfort of knowing our installation and service can back up the product.

Contact Hays today to find out more about Bradford White.

_____________________

Do you need to replace your broken or under-performing water heater? Go with Hays, the best water heater installation company Phoenix has to offer. Our trusted professionals work hard to provide you with exceptional service at a fair price.

Call us today at (602) 714-8270 or contact us online to to schedule an appointment! It Pays To Call Hays!

Read Related Articles:

Searching for a Plumbing Repair Company in Phoenix? Here’s What to Look For

How Long Does a Water Heater Last?

Which is better: Traditional Hot Water Heater vs Tankless

Read full story at: https://hayscoolingandheating.com/bradford-water-heaters-popular-phoenix/

[hayscooling]

Powerful Heat Pumps: Complete Guide to Trane Heat Pumps

Looking for a way to heat up your home?

There are a lot of brands who boast that they are the best when it comes to home-based heating, ventilation, and air-conditioning. Their heat pumps may be good enough to keep you and your home warm for the coming winter.

However, “good enough” might not save you from blizzards or the hottest summers. If you’re looking for the best, then Trane is the brand for you.

Trane is one of the top HVAC manufacturing brands in the market. Despite having such strong competition, people still choose Trane heat pumps to provide themselves with warmth during the cold season.

Wondering why people hold them in such high regard? Read our Trane heat pump review below to find out why consumers prefer Trane above other brands.

Energy Efficiency

Unlike most heat pumps, heat pumps made by Trane make use of electricity instead of propane. In fact, many recognize them as the most efficient among the top HVAC brands.

Their heat pumps have a high HSPF (Heating Seasonal Performance Factor) compared to other brands. It’s the rating HVAC companies use to determine the energy efficiency of a heat pump. The higher the rating, the hotter it is and the lower the usage cost is.

Depending on where you are, you’ll need a heat pump to counteract the cold. Trane has different models of heat pumps for whatever HSPF you need for your home. This makes sure you have an affordable choice where ever you are.

Top Notch Durability

Trane manufactures its heat pumps using steel for the frames which help it resist most damage that comes its way.

Its internal parts are often made from the standard industry materials. However, Trane tries it’s best to come up with better, more durable components made from different materials.

The company experiments in using other materials such as carbon fiber and reinforced synthetic materials not only to increase their heat pump’s durability but to try and make their units lighter as well.

Surfaces of their units are also covered with a powdered material after manufacturing. This makes the unit more resistant to simple damages like scratches or light dents.

Extreme Resilience to the Weather

Heat pumps tend to be too big to fit inside a room in your house. So, people tend to place them outside close to the house instead, leaving the unit at the mercy of the elements. Trane knows this and made several tests to make sure their units are up to contend with nature.

Trane tests their heat pumps in a specialized lab in Texas. This particular lab subjects the machine to 15 weeks of simulated extreme weather conditions. For 2,600 hours straight, the heat pump becomes exposed to extreme heat and cold.

Once a machine passes the test, its entire batch becomes approved for shipping. If it doesn’t, they recall the entire batch to make sure everything is up to company standards. This makes sure what arrives in your home can withstand how cold it will be once winter comes along.

The Interface is Easy for New Users

The interface of a Trane heat pump is simple and easy to understand. New users will find themselves having little trouble understanding its basic functions.

It makes it a great choice if you’re worried about causing damage to your units through overuse. You can read the temperature with ease, and adjusting it is simple.

Buying a Trane heat pump also gives you a user manual for its more advanced functions. This makes it possible for you and those who like to tinker to revert any mistake you may commit while experimenting.

It’s also easy to perform a quick troubleshoot on their heat pumps. The interface also has some advanced diagnostics on it. Provided you know how to understand it, fixing the unit’s problems will be a breeze.

Multi-Functioned Heat Pumps

Trane’s line of heat pumps also supports a rare feature. Their heat pumps can also act like an air-conditioning unit.

It does so by detecting the temperature of the air outside compared to the air inside your home. Using the given information, it directs the hotter air out to the colder atmosphere.

The moment it’s hotter inside your home, the unit pumps the heat to the outside. Reducing the heat found inside your home.

Quieter Pumping

People love Trane’s heat pumps because they’re made to fit a family home. Not only are the units safe, but they are also quiet.

Many heat pumps have a constant background noise when it pumps in the heat or vice versa. What Trane did to solve this problem was soundproofing their products. They place sound-insulating material on the inside of their products.

Variety of Choices

The reason people love Trane’s line of heat pumps is that they have a wide selection to choose from. Different models have their own sizes, and each size has their own recommended house size to make sure that its heating feature reaches its optimum capacity.

How much does a Trane heat pump cost? Each model has its own price range regardless of size, and most of them are quite expensive. The good thing about it is other models will likely fit your price range if the one you want is too expensive.

It’s also worth noting that Trane heat pump prices have lowered throughout the years. According to older buyers, they were even more expensive 10 years prior. So, it may face another price reduction again soon.

How to Get the Best Trane Heat Pump Experience

To make the most of your Trane heat pumping product, you should make sure to hire a professional to install it.

Many of the negative reviews their heat pumps have gotten were due to poor installation. Most people think they can do it on their own. These pumps are quite complicated, one wrong move can lead to it breaking sooner than expected.

That said, if it does break without tampering, you have some great warranty opportunities. Their warranty lasts as long as 1 year and can extend to 20. They offer special deals that can extend that even further, from as short as 5 years to a lifetime warranty.

Also, if you frequent the air conditioning function, make sure to keep the unit clean. There are many reasons to clean your AC and one of them is to prevent it you home from getting polluted.

Get Your Home Heated with Trane Heat Pumps Now

People prefer Trane heat pumps, and now it’s easy to understand why. Get your own pump now!

Do you need a heat pump repair in Phoenix? Contact us here and we’ll get to it as soon as possible!

Read full story at: https://hayscoolingandheating.com/complete-guide-to-trane-heat-pumps/

[hayscooling]

How Does a Reverse Osmosis System Work Exactly?

Did you know? According to a May 2018 report by the Environmental Working Group, over 1,000,000 Americans are drinking contaminated water. It’s contaminated by poly- and perfluoroalkyl substances (PFAS).

Yes, these substances are as scary as they sound. PFAS are a class of fluorine-based chemicals. They are typically used during the manufacturing process of thousands of products you use daily. Everything from clothing, fire retardants, and oil repellents to takeout containers, paints, paper, and leather contains these harmful substances.

Over time, the ingestion of these substances can cause cancer, thyroid disease, and a compromised immune system. These chemicals can even reduce the effectiveness of vaccines in kids.

You can slash your risks by installing an osmosis system in your home. This kind of system can filter all of your water supply, including drinking water. How does a reverse osmosis system work? Read on to find out. Then, choose which one will function best for your needs.

Which Osmosis System Should I Use?

Browse the water purifier isle in any supply store. You’ll see quite a variety of water filtration systems are available. Still, an osmosis system is the most effective way to remove contaminants from your municipal drinking water.

What Is Osmosis?

If you want to understand how a reverse osmosis filtration system works, Let’s first learn about natural osmosis.

According to the Encyclopaedia Britannica, osmosis is “the spontaneous passage of water or other solvents through a semipermeable membrane.” In other words, osmosis occurs when water with a low volume of particles (like salt) travels across a filter to water with a higher volume of salt. Once the process is complete, this results in a solution that is more balanced on both sides.The balance also extends to pressure, not just to the volume of particles.

What Is Reverse Osmosis?

A reverse osmosis water filtration system flips this process on its head.

Your regular drinking water contains many foreign particles. When it goes through the filter, it’s put under pressure. This increased pressure causes the water with the higher concentration of particles to filter across the membrane into the section with the lower concentration. Once the process is complete, you’re left with pure water on one side and wastewater on the other.

How Does Reverse Osmosis Filtration Purify Water?

A reverse osmosis filter puts water through a few stages before it reaches your glass.

First, the water runs through a pre-filter to get rid of any larger particles. That can be anything from rust to dirt. Many osmosis systems use either pleated or melt blown polypropylene filters. These filters remove particles greater than five microns from water.

Next, the activated carbon filter — usually made from coconut shells — removes particles, greater than 0.5 microns.

The activated carbon filter removes chlorine, insoluble lead, and even some forms of bacteria from the water. This actually improves the overall taste of your water.

Once it passes through the activated carbon filter, your drinking water enters the osmotic membrane and undergoes the process of reverse osmosis. The water passes through a thin, filmy membrane which eliminates 95 percent of the remaining particles greater than .0001 microns.

Finally, your water passes through yet another activated carbon filter. This last post filtration step refines the taste of the water. This way, you have the pleasant experience of drinking the freshest-tasting water available. It does this by eliminating anything that the previous filters may have missed such as excess chlorine or particulates.

Why Is Reverse Osmosis Filtered Water Better?

In addition to removing harmful PFAS from your drinking water, an RO purifying system ensures that your pipes won’t become clogged due to excessive mineral buildup.

You probably know about most of the nasty things that can clog up your sink, toilet, showerheads, drains, and pipes. but did you know that mineral buildup contributes to clogs too? It’s often the last culprit You’d suspect, right? However, a reverse osmosis system will keep your water clean and free of minerals. This will make your pipes and toilets last longer.

Why Is Reverse Osmosis Better for Your Wallet?

High water bills are usually caused by a water leak somewhere in your home. But sometimes, the culprit may be your shower.

When your showerhead is clogged with mineral deposits, it reduces the water pressure. Reduced water pressure makes it difficult for you to remove soap and dirt from your body and tub.

Yes, it’s pretty easy to clean a showerhead with distilled white vinegar. But you can save yourself the hassle by preventing the scum build-up in the first place.

Since a reverse osmosis filter removes so much junk from your water, it will make your taps, showers, and faucets more efficient. This efficiency can translate into a lower water bill and a fatter wallet.

Also, this purified water will help your water heater last longer. Some contaminants can be corrosive. This causes the metal in your hot water tank to rust and weaken over time.

What Are Some More Factors to Consider?

The last thing to consider before having a reverse osmosis system installed is whether you should find a point-of-use or point-of-entry system.

A point-of-use system will only filter water from one faucet, such as your kitchen sink. On the other hand, a point-of-entry system will filter water from the point of entry.

Ready To Have Your Filtration System Installed?

The system you choose depends on your priorities. If you’re only interested in filtering your drinking water, then a point-of-use will be sufficient. However, you may want to purify all of your water. In that case, a point-of-entry system would be more useful for you.

Whichever system you opt for in the end, be sure to contact your Phoenix water filtration experts your. We will be glad to answer your questions and help in any way we can.

_________________________________

Are you worried about what’s in the water you are drinking? Contact Hays, the top reverse osmosis installation company in Phoenix, to schedule an appointment and learn what water treatment system will work best for you. Give us a call at (602) 714-8270 today!

Read related articles:

Reverse Osmosis System Review: The Most Popular RO Systems In The Arizona Desert

How to Choose a Water Purification System for Your Home

Clack WS1 Water Softener [Ultimate Guide]

Read full story at: https://hayscoolingandheating.com/how-does-a-reverse-osmosis-system-work/