heavyequipmentmaintain

[heavyequipmentmaintain]

Elephant Fluid Power

A charge pump is mounted on the back end of the main pump. This is sometimes referred to as a replenishing pump. In some cases, the charge pump is located inside the main pump assembly. The charge pump volume is normally 10-15 percent of the main pump volume. When the main pump is in idle mode, the charge pump volume prefills the "A" and "B" ports with fluid. The pressure will continue to build in both ports until the relief valve setting is reached. The charge pump relief is usually set between 200-300 pounds per square inch (PSI). Once the valve’s spring setting is reached, the charge pump volume will flow through the charge pump relief and into the pump case. The oil then returns to the tank through the case drain line.

 Elephant Fluid Power supplies Rexroth, Sauer, Komatsu, Kawasaki and other brand piston pumps to provide charge pumps.

What's the Charge Pump Working Principle?

The purpose of the charge pump is to provide makeup fluid to the system during operation. There are tight tolerances between the pistons and the barrel in the pump and motor. This means that some of the oil inside the pump and motor will bypass the pistons and flow back to the tank through the case drain lines.

 Because of this bypassing, less oil flows out of the motor than what the main pump actually requires. The charge pump will supply makeup oil through the check valve, preventing pump cavitation. The charge pump is also used to supply oil to the spring-loaded cylinders for stroking the main pump.

https://www.heavyequipmentmaintain.com/products/charge-pump/

[heavyequipmentmaintain]

Cat Piston Pump Spare Parts 9T Series

Elephant Fluid Power provides Caterpillar pump accessories with the advantages of reasonable price, fast delivery and quality OEM.

Detail Of Cat Piston Pump Spare Parts 9T Series

These 9T series piston pump parts helpful for Caterpilla machine pump repair such as12G, 120G, 130G, 140G, 160G...

 After use this spare parts, customers no need to buy new pump, waste more cost for customer.

 And all this spare parts with top quality and 100% replacement with Cat original.

 Including Piston, Retainer plate, Ball guide, Cylinder block, Valve plate, Saddle bearing, Shaft, Swash plate....

 Application:

 1. Widely used for Construction machine such as Excavator, Loader, Bulldozer, Concrete pump, Truck Mixer.

 2. Industry machine

 3. Ships

 Attribute Of Cat Piston Pump Spare Parts 9T Series

Attribute

Specifications

Material

Cast/Ductile iron, steel, bronze and others

Types

Replacement parts for hydraulic piston pump

Function

Completely interchangeable with original pump

Parts name

Cylinder block, piston, retainer plate, ball guide, valve plate, drive shaft, swash plate and more

Processing technic

Cutting, lathe, machining center, heat treatment, grind, honing, burring and so on

Trademark

Elephant Fluid Power, Neutral label, or according to client's requirement

Competitive Advantage of Cat Piston Pump Spare Parts 9T Series

1. Our products have been exported to Germany, Norway, Poland, Finland, Spain, UK, France, Russia, USA, Brazil, Mexico, Australia, Japan, Korea, Thailand, Indonesia, Uruguay and many other countries

2. 100% replace with Original

3. Fast delivery time

4. Top quality with a good price

5. Professional technicians and After-sales service

 6. Complete models Available

https://www.heavyequipmentmaintain.com/products/cat-piston-pump-spare-parts-9t-series.html

[heavyequipmentmaintain]

Caterpillar Pump Parts Seal Kit

Elephant Fluid Power: Provide Cat series Hydraulic pump seal kit, original OEM pump parts and auxiliary factory pump parts.

 Elephant Fluid Power: guarantee quality and appropriate prices, and perfect after-sales service.

Details of Caterpillar Pump Parts Seal Kit

Model 1: CAT 12G, 120G, 130G, 140G, 160G. GRADER MAIN PISTON PUMP

 Model 2: CAT 12G, 120G, 130G, 140G, 160G. GRADER PUMP

 Model 3: CAT 12H, 120H, 135H, 140H, 160H, MOTOR GRADER CAT 950G, 950GII, 962G, 962GII, 950H, 962H WHEEL LOADER CAT IT62C, IT62G, IT62H INTEGRATED TOOLCARRIER

 CAT 5130, 5130B, 5230B, 5230G MINING EXCAVATOR CAT 515, 525, 525B, 535B WHEEL SKIDDER

 Model 4: CAT 14G-16G GRADER MAIN PISTON PUMP

 Model 5: CAT D8R, D9R TRACK-TYPE TRACTOR CAT 14H, 16H, 20H, 24H MOTOR GRADER CAT 789C, 793, 793B, 793C TRUCK CAT 5230, 5230B MINING EXCAVATOR

 Model 6: CAT D6H, D6R TRACTOR MAIN PUMP CAT 205B, 206B, 235C, 235D, 245B EXCAVATOR

 Model 7: CAT D6H TRACTOR, 160G MOTOR GRADER

 Model 8 : CAT 12H, 120H, 135H, 140H, 160H, 163H MOTOR GRADER CAT 824G, 824GII, 854G, 992G, 972G, 972GII, 972H, 996H WHEEL LOADER

 Model9: CAT 980G, 980GII, 992G, 825G, 825GII, 826GII WHEEL LOADER CAT D6H, D7R, D6R TRACK-TYPE TRACTOR

 Model 10:CAT 215, 215B EXCAVATOR

 Model 11: CAT 225, EXCAVATOR MAIN PISTON PUMP, CAT 227 LOGGER

 Model 12 : CAT 245, 245B, 235D, 245D EXCAVATOR PISTON PUMP & SWING MOTOR

 Modle 13: CAT 943 TRACK-TYPE LOADER, CAT 990 WHEEL LOADER

 Model 14: CAT 215, 215B, 225, EXCAVATOR SWING MOTOR, CAT 227 LOGGER

 Mode 15: CAT 215, 215B EXCAVATOR MOTOR

 Modle 16: CAT 953, 953B, 963, 963B, 973 TRACK LOADER AXIAL PISTON PUMP

 Model 17: CAT D7R TRACK-TYPE TRACTOR MOTOR TRAVEL CAT M315, M318, M320 WHEEL EXCAVATOR CAT 572R PIPELAYER

 Model 18: CAT 992C WHEEL LOADER VARIABLE PISTON PUMP CAT 245, 245B, 245D EXCAVATOR MAIN PISTON PUMP

 Model 19: CAT 994, 992D, 992C, 994D WHEEL LOADER

 Model 20: CAT 994, 992D, 992G, 990D WHEEL LOADER

 Model 21: CAT 235, 235B, 235C, 235D, 245B EXCAVATOR MAIN PISTON PUMP

 Model 22: CAT 235, 235B, 235C, 235D, 245B EXCAVATOR MAIN PISTON PUMP

 Model 23: CAT 416, 426, 436, 438 BACKHOE LOADER MAIN PUMP

 Modle 24: CAT D5H TRACK-TYPE TRACTOR

 Model 25: CAT D5H, D6M, 517, 527 TRACK SKIDDER

 Model 26 : CAT 211B. 212B, 213B, 214B. 224B EXCAVATOR PUMP

 Model 27:CAT 572 PIPELAYER PUMP

 Model 28:CAT D7H, D8N TRACK-TYPE TRACTOR PUMP

 Model 29: CAT 215B, 215C, 215D, 219, 219D, 225, 225D, 229, 229D, 231D, M313C EXCAVATOR DOUBLE PUMP & MOTOR

 Model 30: CAT 320 B, 320BL, 320BLL, 320BLN, 320BN, 320BS, 320C, 322B, 322BL, 322BLN, 322C, 322L, 325B, 325BL, 325BLN, 330B, 330 BL EXCAVATOR MOTOR TRAVEL

 Model 31: CAT 320B, 320BL, 320BN, 320BS, 322BL, 322BLN, 322C, 325BL, 330BL, EXCAVATOR MOTOR

 Modle 32: CAT 322L, 322LL, 322FB, 325L, 325LL, 325FB, 330, 330L, 330LN EXCAVATOR TRAVEL MOTOR

 Model 33: CAT 320, 320B, 320BL, 320L, 320N, 322B, 322BL, 322 BLN, 322L, 322LN, 322N, 325B, 325BL, 325L, 325LN E300B EXCAVATOR DOUBLE PUMP CAT 539 KNUCKLE BOOM LOADER

 Model 34: CAT 320, 320BL, 320L, 320N, 345B, 345BL SWING MOTOR

 Modle 35: CAT 320, 320L, 320N, 320S, 322, 322L, 322LN TRAVEL MOTOR

 Modle 36: CAT 318C, 319C, 320, 320B, 320C, 320D, 321C, 323D EXCAVATOR DOUBLE PUMP

 Model 37: CAT 318C, 319C, 320, 320L, 320B, 320C, 320D, 321C, 323D EXCAVATOR DOUBLE PUMP

 Modle 38: CAT 320C, 322BL, 322C, 322CL, 323D, 324D, 325BL, 325BLN, 325C, 325CL, 325D, 325DL, 325DLN, 330BL

 Model 39: CAT 325, 325L, 325LN, 325N EXCAVATOR MOTOR

 Modle 40: CAT 322C, 322CL, 324D, 324DL, 325C, 325CL, 325D, 325DL, 328D, M325C EXCAVATOR PUMP

 Modle 41: CAT 330, 330B,330BL, 330LN, 330BLN, 330L, 345B, 345BL, 354BLC

 Modle 42: CAT 416, 428 BACKHOE LOADER PUMP CAT 650B, 800C, 900B, 1000B, 1050B, 1055B ASPHALT PAVER PUMP CAT D250E, D300E ARTICULATED TRUCK PUMP

 AP1000, AP1055 B, BG230, BG225C, BG245C, BG255C, BG260C, BG2455C, BG230D ASPHALT PAVER

 Model 43: CAT 918F, 924F, 928F, 928G, 988F WHEEL LOADER PUMP CAT 30-30, D4H, D4HTSK, D5M, D8L, TRACK-TYPE TRACTOR PUMP CAT PM-565, PM-565B COLD PLAYER PUMP CAT IT18F, IT24F, IT28F, IT28G INTEGRATED TOOLCARRIER PUMP CAT D4H TRACK SKIDDER PUMP CAT 65C, 75C, 75D, 85C, 85D CHALLENGER PUMP

 Model 44: CAT 322BL, 322L, 325B, 325, 325BL, 325L, 325LN, 330, 330B, 330BL, 330L, 350, 350L, CAT 375, 375L, 352 BL, M325B, W330B EXCAVATOR SWING MOTOR CAT 5080 FRONT SHOVEL CAT TK1051 TRACK FELLER BUNCHER

 Modle45: CAT E200B, EL200B EXCAVATOR PUMP

 Modle 46: CAT 330C, 330CL, 345B, 345BL DOUBLE PUMP CAT 541, 551, 552, 511, TK1051, 1090, 1190, 1290, 1390, TK711, TK721, TK722, TK732, TK741, TK751, TK 521, 522, 532, 2290 TRACK FELLER BUNCHER

 Model 47: CAT M312, M313C, 322C, CAT 325C, CAT 330C, 330D EXCAVATOR MOTOR TRAVEL CAT 939C TRACK LOADER CAT D4C, D5C TRACTOR CAT IT14G INTEGRATED TOOLCARRIER CAT 1390, TK741, 541 TRACK FELLER BUNCHER CAT 5130B MINNING EXCAVATOR CAT 914G WHEEL LOADER

 Model 48: CAT 416B, 426B, 436B, 416C, 426C, 436C, 428C, 416D, 424D, 432D, 442D, 438C, 430D, 420D, 420E, 430E, 450E PUMP CAT 990 WHEEL LOADER PUMP CAT 844 WHEEL TRACTOR CAT D11N, D11R TRACK-TYPE TRACTOR CAT D250E, D300E, 730, 725 ARTICULATED TRUCK CAT 711D, 766D, 773D, 773E, 773F, 784C QUARRY OFF HIGHWAY TRUCK

 Model 49: CAT. 550, 570, 580, 550B, 560B, 570B, 580B WHEEL HARVESTER CAT. 554, 574 FORWARDED, CAT. CHALLENGER 65, 65B, 65C, 65D, 70C, 75, 75C, 85C

 Model 50: CAT C9, C11, C13, C15, C18 PETROLEUM ENGINE, CAT CB543D VIBRATORY COMPACTOR CAT D3C, D4G, D5G, D5K, D6N TRACK TYPE TRACTOR CAT 933C TRACK LOADER

 Modle 51: CAT 307, 307B, 307C, EXCAVATOR, CAT 305, 5 MINI-EXCAVATOR A10VD43

 Model 52: CAT 938F, 938G WHEEL LOADER CAT RM-350, RR-250, RM-350B, SM-250, SS250 RECLAIMER MIXER CAT D250E, D300E ARTICULATED TRUCK CAT IT38F, IT38G INTEGRATED TOOLCARRIER

 Model 53: CAT 330D, 330DL, 345B, 345BL, 345C, 345CL, 385BL, 385C, 385CL, 5090B EXCAVATOR CAT 12H, 14H, 16H, 120H, 135H, 140H, 13H,160H, 163H MOTOR GRADER CAT 651E, 657E, 657G, 938G, 938H, 950G, 962G WHEEL LOADER, CAT IT38G, IT62G INTEGRATED TOOLCARRIER

 Modle 54: CAT 854G, 992G, 994, 994D WHEEL LOADER, CAT 5080 FRONT SHOVEL, CAT 5130, 5230 EXCAVATOR

 Model 55: CAT 735, 740, 775, D350E, D400E ARTICULATED TRUCK CAT 554 FORWARDED, CAT 777F TRUCK, CAT 844 WHEEL TRACTOR CAT D6T, D10T TRACK-TYPE TRACTOR CAT 990 WHEEL LOADER CAT 776D, 777D TRACTOR CAT 365B, 365BL EXCAVATOR

 Model 56: CAT D5N, D11R TRACK-TYPE TRACTOR CAT 924G, 966G, 97G, 980G, 924H, 966H, 972H, 980H, 988H WHHEL LOADER CAT 824G, 834H, WHEEL TRACTOR CAT 5090B, 5110B, 345C, 365B, 365C, 385B, 385C, EXCAVATOR CAT 35, 45, 55 CHALLENGER CAT TH330B, 350B, 355B, 360B TELEHANDLER CAT CP54, CS54, CS533E, CP533E, CS563E, CS563D, CS533C, CS563C, CP563D, CS56, CP56, CS533D, CS531D RATORY COMPACTOR CAT PM-465 COLD PLANER, CAT 825G, 826G, 825H, 836H SOIL COMPACTOR

 Modle 57: CAT D8T, D9T TRACK-TYPE TRACTOR CAT 834G, 836G, 834H, 836H WHEEL DOZER CAT 988G, 988H WHEEL DOZER CAT 797 OFF-HIGHWAY TRUCK

 Modle 58: CAT 245B, 245D EXCAVATOR MOTOR, CAT 235C, 235D EXCAVATOR MOTOR CAT 5110B, 5230, 5230B MINING EXCAVATOR MOTOR CAT 963C TRACK LOADER MOTOR

 Model 59: CAT M315, M318, M316C, M315C, M318C, M315D, M318D EXCAVATOR PUMP CAT 623F, 623E, 623G WHEEL TRACTOR CAT 793C, 797B, 797 TRUCK

 Model 60: CAT 215B, 215C, 219, 219D, 225, 225B, 225D, 227, 229 EXCAVATOR CAT 623E, 623F, 623G WHEEL SCRAPER, CAT 5130, 5130B, 5230 MINING EXCAVATOR, CAT 797 TRUCK CAT D6H, D6R, D7H, D7R, D8N, D8R, B8T, D9R, D9T, D10T, D11R, D11T TRACK-TYPE TRACTOR CAT 844H, 988F, 990H WHEEL LOADER

 Model 61: CAT D8R, D8N, D8T TRACK-TYPE TRACTOR CAT 973C, 963AlDl mTaRnAufCaKctuLrOerA's DnEaRmes, numbers, symbles and descriptions are for reference purposes ONLY CAT 583T, 587R, 587T PIPELAYER, CAT 621F, 621G, 627F, 627G, 631G, 637F WHEEL TRACTOR

 Model 62: CAT 322C, 324D, 325C, 325D, 328D, 330C, 330D, 345C, 345D

 Model 63: CAT 215B EXCAVATOR, AP-1055B, BG-2455C ASPHALT PAVER CS-573, CP-663, CS-683, CS-663, CS-76, CP-76, CS-583, CS72 VIBRATORY COMPACTOR 5110B, 5230B MINING EXCAVATOR

 Model 64: CAT 311B, 312, 312B, 315, 315L, 315B, 317, 317B, 317N, 318B EXCAVATOR MAIN PUMP

 Model 65: CAT 330D, 330DL, 330DN, 336D, 336DL, 345C, 345CL EXCAFVATOR MAIN PUMP

 Model 66: CAT M318, M318C, M318D, M320, M322C, M322D EXCAVATOR PUMP CP-663E, 583E, 573E, 533D, 64, 54, 74 VIBRATORY COMPACTOR CB-634C, 534C, 534B, 564D, 535B, 434C, 434B VIBRATORY COMPACTOR CS-663E, 563E, 573D, 573E, 583E, 563D, 583D, 531D, 64 VIBRATORY COMPACTOR CAT D6N TRACK-TYPE TRACTOR PUMP CAT 216, 226, 228 267, 277, 267B, 277B MULTI TERRAIN LOADER HYDROSTATIC PUMP

 Model 67: CAT M320, M322C, M322D, 350, 365C, 375 EXCAVATOR CAT 550, 570, 580, 550B, 560B, 570B, 580B WHEEL HARVESTER CAT 990, 990H WHEEL LOADER CAT 5080 FRONT SHOVEL, CAT 793D, 797B TRUCK CAT 844 WHEEALll mDaOnZuEfaRcturer's names, numbers, symbles and descriptions are for reference purposes ONLY

 Model 68: CAT 385B, 385C EXCAVATOR, 5090B FRONT SHOVEL

 Model 69: CAT 365C, 385B, 385C EXCAVATOR, 5090B FRONT SHOVEL

 Model 70: CAT PS-150B, 200B, 150C, 360B, 290B, 360C PNEUMATIC COMPACTOR CAT IT14G, INTEGRATED TOOLCARRIER CAT 914G WHEEL LOADER CAT D4C, D5C, D6K TRACK TYPE TRACTOR CAT 939C, 953C, 953D, 963, 963C TRACK LOADER

https://www.heavyequipmentmaintain.com/products/caterpillar-pump-parts-seal-kit.html

[heavyequipmentmaintain]

Bonfiglioli Concrete Mixer Truck Reducer

The reducer is manufactured by Elephant fluid Power Co., Ltd, a famous made in China brand. 575L, 577L, 580L model can be usted to replace Bonfiglioli 575L, 577L, 580L model. We have equivalent quality as the original one, more competitive price, delivery fast, and best after-sales services. ELEPHANT Fluid Power is a hydraulic power expert integrating professional concrete mixer (pump truck) hydraulic system supporting, maintenance, and spare parts supply.

 The reducer is manufactured by Elephant fluid Power Co., Ltd, a famous made-in-China brand. 575L, 577L, 580L model can be usted to replace Bonfiglioli 575L, 577L, 580L model. We have equivalent quality as the original one, more competitive price, delivery fast, and best after-sales services.

  Our company has long provided the hydraulic components of the following types of concrete machinery (concrete mixer, pump truck, etc.), original and replacement models.

Detail Of Bonfiglioli Concrete Mixer Truck Reducer

1. ZF series: P3301, P4300, P5300, P7300, P7500, PLM-7, PLM-9 mixer truck reducer assembly

 2.PMP series: PMB6R100, PMB7A120, PMB7B129, PMB6.5R120, PMB6spR129, PMB7aspR120, PMB7.1R120, PMB7R130, PMB7.1R130, PMB7.2R130, PMB8R140 mixer truck reducer assembly;

 3.Bonfiglioli Bonfiglioli series: 575L, 577L, 580L mixer truck reducer assembly;

 4. SAUER Sauer series: TM51.2, TM61.2, TM71.2 mixer truck reducer assembly;

 5. TOPUNIOU top series: P68, P70S, P75S, P75R, P90 mixer truck reducer assembly;

 6. DAIKIN series: DD33-MF, PK86-BF mixer truck reducer assembly.

 7. KYB card dumb series: RC100, RC102 mixer truck reducer assembly.

 8. Mixer truck hydraulic pump series: Rexroth Rexroth A4VTG71, A4VTG90, Sauer SPV22, SPV23, T90, PV089, KYB PSVS-90, NP71, NP90, NP112, Eaton 4623, 5423, 6423 assembly

 9. Mixer hydraulic motor series: Rexroth AA2FM68, AA2FM80, AA2FM90, Sauer MF22, MF23, TMM90, MF089, KYB MSF-85, MP71, MP90, MP112, Eaton 4633, 5433, 6433 assembly

 Attribute of Bonfiglioli Concrete Mixer Truck Reducer

After-sales Service:

Online Support, Video Technical Support

Warranty:

12 Months

Transport Package:

Anti-Rust Treatment+Poly Bag+Wooden Box

Specification:

60*40*45

Trademark:

Elephant fluid power

Origin:

China

https://www.heavyequipmentmaintain.com/products/bonfiglioli-concrete-mixer-truck-reducer.html

[heavyequipmentmaintain]

Big Bearing F-207813 For Rexroth A4VG180 Piston Pump

Big Bearing F-207813 for Rexroth A4VG180 piston pump

 Elephant Fluid Power provides hydraulic piston pump bearings, original bearings, the price is reasonable, and will be shipped within 5 days.

Detail of Big Bearing F-207813 For Rexroth A4VG180 Piston Pump

The important part of the plunger pump is the bearing. If there is play in the bearing, the normal clearance of the three pairs of friction pairs inside the hydraulic pump cannot be guaranteed. At the same time, the thickness of the hydrostatic bearing oil film of each friction pair will be destroyed, reducing the use of the plunger pump bearing. life. According to the information provided by the hydraulic pump manufacturer, the average service life of the bearing is 10000h, and it is necessary to replace the new port if this value is exceeded. Bearings removed can not be detected without professional testing equipment, and can only be visually inspected. If scratches or discoloration are found on the roller surface, they must be replaced.

 When replacing bearings, attention should be paid to the English letters and models of the original bearings. Most of the plunger pump bearings use large load capacity bearings. Purchase the original manufacturer and original specifications. If you replace another brand, you should consult a person who has experience with the bearing to look up the table and exchange, the purpose is to maintain the accuracy level and load capacity of the bearing.

 Axial plunger pumps can also use frequency converters to save electrical energy. In the actual production process, axial plunger pumps are usually operated under pressure or flow to adjust the operating state. When the actual pressure is greater than the required pressure, it is adjusted through the relief valve to keep its operating pressure stable and let the relief valve release the excess. The motor has been running at full speed repeatedly, and the power consumption remains unchanged.

 The valve plate has two forms: plane flow distribution and spherical flow distribution. The friction pair of spherical flow distribution is repaired by grinding when the scratches on the flow distribution surface of the cylinder are relatively shallow: when the groove on the flow distribution surface of the cylinder is deep, the groove should be filled with "surface engineering technology" before grinding Do not blindly grind to prevent the copper layer from thinning or oil leakage from the steel base.

 Dear Customer:

 Hello, Elephant Fluid Power is a high-quality development group with strong technical force, providing high-quality products, complete solutions and first-class technical service companies to users. The company adheres to the tenet of establishing business with integrity, keeping business with quality, and making progress with progress. It continues to climb new peaks at a firmer pace and contributes to the national automation industry. Welcome new and old customers to buy their favorite products with confidence. We will serve you wholeheartedly!

 Attribute of Big Bearing F-207813 For Rexroth A4VG180 Piston Pump

Attribute

Specifications

Material

Cast/Ductile iron, steel, bronze and others

Types

Replacement parts for the hydraulic piston pump

Function

Completely interchangeable with the original pump

Parts name

Cylinder block, piston, retainer plate, ball guide, valve plate, drive shaft, swash plate and more

Processing technic

Cutting, lathe, machining center, heat treatment, grind, honing, burring and so on

Trademark

Elephant Fluid Power, Neutral label, or according to the client's requirement

https://www.heavyequipmentmaintain.com/products/big-bearing-f-207813-for-rexroth-a4vg180-piston-pump.html

[heavyequipmentmaintain]

Bearing F-205045, F-224580 For Piston Pump A11V095

Bearing F-205045, F-224580 for Piston pump A11V095

 Elephant Fluid Power provides hydraulic piston pump bearings, original bearings, the price is reasonable, and will be shipped within 5 days.

Detail of Bearing F-205045, F-224580 For Piston Pump A11V095

The important part of the plunger pump is the bearing. If there is play in the bearing, the normal clearance of the three pairs of friction pairs inside the hydraulic pump cannot be guaranteed. At the same time, the thickness of the hydrostatic bearing oil film of each friction pair will be destroyed, reducing the use of the plunger pump bearing. life. According to the information provided by the hydraulic pump manufacturer, the average service life of the bearing is 10000h, and it is necessary to replace the new port if this value is exceeded. Bearings removed can not be detected without professional testing equipment, and can only be visually inspected. If scratches or discoloration are found on the roller surface, they must be replaced.

 Attribute of Bearing F-205045, F-224580 For Piston Pump A11V095

Attribute

Specifications

Material

Cast/Ductile iron, steel, bronze and others

Types

Replacement parts for hydraulic piston pump

Function

Completely interchangeable with original pump

Parts name

Bearing

Processing technic

Cutting, lathe, machining center, heat treatment, grind, honing, burring and so on

Trademark

Elephant Fluid Power, Neutral label, or according to client's requirement

 Competitive Advantages of Bearing F-205045, F-224580 For Piston Pump A11V095

1. Our products have been exported to Germany, Norway, Poland, Finland, Spain, UK, France, Russia, USA, Brazil, Mexico, Australia, Japan, Korea, Thailand, Indonesia, Uruguay and many other countries

 2. 100% replace with Original

 3. Fast delivery time

 4. Top quality with good price

 5. Professional technicians and After-sales service

 6. Complete models Available

https://www.heavyequipmentmaintain.com/products/bearing-f-205045-f-224580-for-piston-pump-a11v095.html

[heavyequipmentmaintain]

B1-300 Five-Star Motor Hydraulic Piston Pump

Application areas: injection molding machines, hydraulic rotary lifting machinery, road machinery, snow removal vehicles and other fields.

Details of B1-300 Five-Star Motor

Product introduction:

 Low-speed high-torque motor, no connecting rod structure, the driving part is an eccentric spherical pair, no lateral force;

 Fully balanced and compensated oil distribution, high reliability;

 The starting efficiency is as high as 90%, and the volumetric efficiency and mechanical efficiency are high;

 The minimum speed is 0.5~1 revolutions per minute, and the minimum speed is stable.

 Features of B1-300 Five-Star Motor

1. Axial piston pump with swashplate design for hydraulic drive in open circuit.

2. Optional installation location.

3. Excellent oil absorption characteristics.

4. Low noise level.

5. Long service life.

6. Modular design.

7. Short response time.

8. Variable speed drive options.

https://www.heavyequipmentmaintain.com/products/b1-300-five-star-motor-hydraulic-piston-pump.html