icunlockmcucrack-blog

[icunlockmcucrack-blog]

What is the importance of the unlock chip in PCB design?

In PCB designing, cloning chip is performed by the engineers and many get the wrong idea about reverse engineering. They also assume that it is the same as copying the exact design while it is not so. There is a difference between clone and copy. It allows the designer to make something that behaves somewhat identical in nature fundamentally.

Unlock chip uses the process of reverse engineering which can be used for the examination of innovation for learning. Moreover, it connects with the people helping them in the learning process concerning the operation of the items and frameworks.

Coming to the reasons, there are plenty of them to prove that why reverse engineering may be used on a PCB layout. For instance, the existing pattern may involve obsolete semiconductors that were available when it was first designed. Also, they are expensive and environmentally non-complaint.

Unlock chip allows you to copy the design but that is not always possible with complex multilayered VLSI designed. It is also possible to photocopy the board into layers but it introduces anomalies that affect its function.

Moreover, it allows you to redesign the printed circuit board from the first concepts with a set of first-generation plans which can be reused.

Unlock chip is performed depending on the PCB design software.

What are the steps you need to take care of while performing chip cloning?

1.      Schematic is complete and it is connected to what is on the schematic

2.      Now, place the components for one of the channels and keep track of the board form factor, and the other channels that will be a part of the design.

3.      In case you want to route connections then select the components, traces, and vias that you want to copy.

If you want more information regarding the unlock chip, then visit ICunlock MCUcrack’s official website!

[icunlockmcucrack-blog]

Get Premium IC hack Services at a very low price | Shenzhen Orod Technology

Shenzhen Orod Technology provides the best IC hack service globally. We provide to unlock IC, MCU decryption; CPLD decryption; PCB copy, PCB clone, schematic diagram, BOM bill of materials production as well as circuit board supporting original device supply. We are backed by advanced decryption equipment as well as professional decryption technology and years of research as well as development strength. Our company provides you with the most challenging chip decryption services as well as various new models of single-chip decryption development. The company has now developed into a domestic professional feature, prestige in the electric technology industry highly influenced high-tech companies. To know more visit us at https://icunlock-mcucrack.com/

[icunlockmcucrack-blog]

How PCB clone will PCB redesign and development?

PCB clone which is also known as PCB copy or PCB duplication is a reverse engineering technology that is based on existing physical PCB boards and makes a copy of it.

PCB cloning is done under the premise that there are already physical objects and circuit boards of electronic products while the reverse analysis technology is used to reversely analyze the circuit board and the original product PCB file, schematic file, and other production documents such as PCB Gerber and PCB silkscreen.

Now let us look at how PCB cloning would help PCB re-design and development. As we discussed earlier, PCB cloning is a reverse research technology that has made the development process much shorter. However, in recent years, the development of electronic technology has been changing and many electronic products have been upgraded. We can be sure that future electronic product updates may be faster and it has been felt that using conventional R&D methods cannot meet the fast steps of modern electronic product replacement.

What are the PCB cloning steps?

1.      IC Unlock where you need to extract the IC program

2.      Get Gerber file, BOM list & Schematics from PCB sample

3.      PCB Prototype: here, you will build new boards by using the Extract IC program and PCB files.

4.      Now comes the testing and debug where you will check the function of the new board and fix the bug, incompatible, and other error.

Now it must have been clear that how PCB clone can help the circuit industry, so if you need any help regarding PCB cloning, make sure to visit our official website i.e. https://icunlock-mcucrack.com/ !

[icunlockmcucrack-blog]

Are you in search of IC Hack? Shenzhen Orod specializes in IC hack. We provide to unlock; MCU decryption; CPLD decryption; PCB copy, PCB Clone, Schematic diagram, BOM bill of materials production as well as circuit board supporting original device supply, circuit board design, Circuit board processing as well as debugging services and other high-tech enterprises with a full-range of products.

[icunlockmcucrack-blog]

Craft Same PCBs without Files: PCB clone Service at Best Price

Are you missing the CAD or PCB files for that bare or assembled printed circuit board (PCB)? Shenzhen OROD Technology Co. Ltd has the solution to this unique problem that has afflicted many companies throughout the entire electronics industry.

Do you have the physical electronic circuit board on-hand but don’t have the circuit design files? Don’t have any PCB Gerber drawing files for your PCB production and circuit assembly. Or want to reproduce the PCB board without any blueprint? There’s a solution to everything – PCB Clone or PCB cloning!

So, What PCB Clone Exactly Is?

PCB Clone service enables you to replicate the same copy of electronic circuit board that you want for simple electronic circuit. PCB Clone isn’t too difficult. If right circuit involves intelligent controller, cloning should be the last resort that you should opt for as a solution for your engineering or business challenge.

Technology included to PCB Clone enables the possibility on reversing the PCB module from the physical item to engineering drawings. Physical PCB modules will be translated into PCB Gerber (the production engineering file), PCB BOM list (PCB component list) and PCB Schematic Diagram. With these engineering files, we are able to re-produce/clone a PCB module.

Reversing Steps to PCB Copy:

·         Remove all the components and record the placement of every components on the board

·         Scan outer layer PCB circuits to software for editing and comparison

·         Remove the dielectric layer PCB, and scan the inner layer PCB circuit to the software for editing and comparison

·         Remove copper coating scanned, and repeat step 3 until all layers are recorded

·         Reverse the images taken to Gerber file (the engineering file for manufacturing)

·         Convert the Gerber file acquired to PCB layout design, and add all the components in the drawings according the placement recorded

·         Check the outline drawing to make sure there is not open/break circuit

·         Convert the outline drawing to schematic drawing

·         Check the schematic drawing

How to Work for PCB Copy?

·         Take sample photos; send to Shenzhen OROD Technology Ltd

·         Our engineer will give rough price after verifying

·         Once samples are tested and verified; we’ll provide the exact quotation and you’ll have to process half of the payment.

·         Once the PCB Clone is done as per your requirements, we’ll send you samples to check

·         Once samples get checked and certified ok; we’ll send the link to pay the balance amount

·         Once the PCB Clone job is completed, we’ll start working on manufacturing the board for you

Contacting Shenzhen OROD Technology Co. Ltd to do PCB Clone will save much time and money for those customers who pay more attention to marketing and help them always stay ahead in the market. All these will create value for our customers.

For more complete information on PCB Copy; get in touch! Rest assured that you’ll receive 100% the same as the original PCB circuit every time you ask for PCB Clone service. To know more visit us at http://icunlock-mcucrack.com/

[icunlockmcucrack-blog]

How to understand PCB clone board

PCB Clone board is often referred to as PCB copy board, PCB cloning, cloning, PCB circuit board copy, PCB or PCB reverse backward design research and development.

PCB clone board has been in the electronic products and under the premise of circuit board material, uses reverse technology to reverse parsing of the circuit board.

Due to the electronic products are composed of all kinds of circuit board core control part, use of such a process PCB clone that can complete the extraction of any electronic products a full range of technical information and products of cloning and imitation.

For PCB clone board, a lot of people don’t understand what PCB clone board is. Some think that it is a fake board.

PCB clone board is for the purpose of the study abroad the latest technology of electronic circuit design and then absorb excellent design scheme and used to develop more outstanding product design.

PCB clone board is a type of reverse research techniques, in order to get good electronic products of PCB circuit design, BOM list, and circuit schematic.

Between the forward researches with reverse research is because of the competition.

So, in recent years the development of electronic technology to the rapid, electronic products, updated once a year.

PCB clone board is to make more and more developing countries quickly take the frontier of high-tech electronic technology.

[icunlockmcucrack-blog]

Highly- efficient IC decode brought to you by Shen Zhen Orod Technology

If you are looking for an IC decode, your best option is to visit official website of Shen Zhen Orod Technology is the optimum destination to be reached and delve the finest quality of electrical components at an affordable price. We are a professional company that offers premium IC Unlock, MCU Crack, PCB clone, as well as chip programmer.

In this blog post, we will discuss some imperative points about IC decode and their functional. Let’s dive down the blog post to know more!

Know your IC Decode!

In the world of digital electronics, an IC decode is a combinational logic circuit that converts binary information from the n coded inputs to a maximum of 2nd unique outputs. They are used in a wide variety of applications, encompassing data demultiplexing, seven-segment displays, as well as memory address decoding.            

Save time with IC Decode from Shen Zhen Orod Technology

If your application requires an IC decoder and you want to save time, feel free to grab the IC decode from Shen Zhen Orod Technology. This IC decoding board will help you to cut some days off your protect development. This shield is very easy and effortless to use.

Why Choose Shen Zhen Orod Technology?

·         Twenty years of rich experience for IC decode, IC Unlock, and MCU Crack, IC reverse analysis design, chip burnishes and model identification etc.

·         High success rate as compared to any other IC unlock company

·         High efficiency that means we can finish the work in very short period

·         High Integrity that means we can make all promised

·         You are very lucky if you choose us

So, want to buy IC decode from us? Then hurry up visit us now! We are ready to help you now! Our Official website is the best inventory that provides you opportunity to select your desired ones.

[icunlockmcucrack-blog]

Shen Zhen Orod Technology is the most advanced company in the field of IC copy in China. Our immense experience has helped domestic and foreign enterprises, government and public scientific research institutions to overcome numerous technical complications. We are the one-stop destination providing the whole process services. Have an issue? 24*7 customer support available! Get-in-touch!

[icunlockmcucrack-blog]

How IC Unlock can be done Flawless? Fruitful Ways to Attack an IC

Shenzhen OROD Technology Co. Ltd continues to be recognized as the leader in services for MCU Crack, IC Clone, IC Decode, PCB Clone, and PCB Copy, etc. With the advancement of today’s modern circuit board technology; it’s more important than ever to have specialists available to help you at a moment’s notice. Our engineering and commercial teams collectively have a vast amount of electronic experience covering field include consumer electronics, industrial automation electronics, wireless communication electronics, etc.

IC unlock service help anyone decrypt the ICs through the semiconductor reverse engineering approaches. There’re a lot of approaches used by certified IC unlock services provider in the real-time; some of which are:

IC Unlock via Software Attacking:

The technology typically attacking ICs by using the processor communication interfaces and exploits protocols, cryptographic algorithms, or security holes in these algorithms. A typical example of software attack was the attack on the early ATMELAT89C family of microcontrollers. The attacker took advantage of the loopholes in the timing design of the erasing operation of the series of microcontrollers; by using a self-designed program, stopped the next step of erasing the program memory data, after erasing the encryption locking bit. The program became non-encrypted and then just read out the on-chip program by programmer.

It also possible to utilize the encryption methods to attack IC, based on the development of new attacking devices, with some software to do IC unlocks. Recently, there has been attacking the device in China named Kai Ke Di Technology 51 Chip decryption equipment. This device was used to IC unlock mainly through SyncMos.Winbond, due to the loopholes in the IC production process.

IC Unlock by Electronic Detection Attacks:

The technology typically monitors the processor’s analog characteristics of all power and interface connections during normal operation with high temporal resolution and attacks by monitoring its electromagnetic radiation characteristics. Because the microcontroller is an active electronic device, the corresponding power consumption changes as they execute differently instructions. This allows the attacker to acquire specific critical information in the microcontroller by analyzing and detecting these changes using special electronic measuring instruments and mathematical statistics. As for the RF programmer can directly read the old model of the encryption MCU program is to use this principle.

How Shenzhen OROD Technology Co. Ltd Do IC Unlock?

The world’s senior professional reverse research labs – Shenzhen OROD Technology Ltd – provide you with the most professional reverse research technology services, such as PCB copying, IC unlock, PCB design, electronic product cloning etc.

· We receive the original chip at first phase, then test the chip for error-detection, pays the deposit and make arrangements for IC unlock

· Once the IC unlock gets complete, two samples are provided to the customer for testing

· If testing goes verified, balance payment is processed; if not, then testing continues

· Test results are submitted within one month as far as possible

· The deposit will not be refunded if the customer fails to provide testable equipment to find the defect

· IC unlock process is risky and we strive for 100% success

Though we are backed by latest technology and professionals to do IC unlock; the process is critical and needs accurate equipment to move ahead further. Rest assured that IC unlock done by Shenzhen OROD Technology Ltd won’t disappoint you!

Need more info about IC unlock? Get in touch!

[icunlockmcucrack-blog]

IC Decode: Concept Designed to Improve System Performance! Why & How – Know It Here

Before going into the IC decode section, let’s first get started with what is ICs. Pay close attention to everything mentioned here or else you’ll get lost in the dreamland of digital closed-loop motion control systems.

ICs stand for Integrated Circuits. A CMOS Integrated Circuit is a device that performs quadrature decoding, counter, and bus interface functions. IC decodes or decoder integrated circuits are therefore designed specifically to improve system performance in both digital closed-loop motion control and digital data input systems. The IC decoders manage the task by shifting time intensive quadrature decoder functions to cost-effective hardware. The IC decoders consist of quadrature decoder logic, an 8-bit bus interface and binary up/down state counter. The use of Schmitt-triggered CMOS inputs and input noise filters allow reliable IC decoder operation in noisy environments. These IC decoders contain a 12-bit counter and offer CMOS compatible tri-state output buffers.

Difference between IC Decode and Encode

In communication systems, IC encoders are used for transmitting digital information. There, the encoders reduce the number of bits needed to represent digital information, so that, the transmission link could transfer the encoded information using fewer lines. The encoders are also used for encoding the data which is to be stored for later use as it facilitates fewer bits storing over the available space.

The IC decoders perform the inverse operation of the IC encoders. They’re used to decode IC binary codes into respective min-terms which in turn represent individual symbols and characters. Both IC decode and encode components are combinational circuits as their output depends only on the current values of the input. Each circuit they’re connected with has a unique truth table from which the respective Boolean expression for each output can be derived. The minimized Boolean expression is then converted into a logic gate diagram which is built on a breadboard using a series of ICs.

Designing 2-to-4 Line IC Decoder  

An IC decode is a multiple input multitude output logic circuit which converts coded input into coded output where input and output codes are different. The input code generally has fewer bits than the output code. Each input codeword produces a different output code word. There’s one to one mapping exists which can be expressed in the truth table. In an IC decode circuit; the encoded information is present as ‘n’ input producing ‘2n’ possible outputs. The 2n output values range from 0 to 2n-1.

A 2-to-4 line IC decodes can interpret 4 symbols or characters. There are two inputs that can have input values ranging from 00 to 11 and at the output, there are 4 lines. The IC decode constructed here has an additional enable input to switch on and off the decoder operation.

The circuits designed can be tested by giving supply voltage to the ICs by a battery via a voltage regulator. The same voltage can be dropped to 2V level using a variable resistor for High logic while providing Low logic through the ground. The output signals can be checked by connecting LEDs at the output pins of each combinational circuit. The circuits can be checked by verifying truth tables for each circuit.

Stay connected to learn how to connect IC decode and encode for optimal system performance!

[icunlockmcucrack-blog]

PCB stands for Printed Circuit Board which is an essential electronic component in any electronic component and electrical connection. PCB copy boards use reverse research and development technology to reverse analysis of circuit boards. Shenzhen experts combine the most advanced scanning technology and software technology to clone single or multilayer PCB and complicated PCB with all kinds of buried and blind. Get effective and most advanced PCB copies at lowest possible price! Contact today on +86-13378667812