jieqi5896

[jieqi5896]

Pay attention to safety when adding alcohol to the washing machine

The new coronavirus has in vitro activity. Previously, the Guangzhou Center for Disease Control and Prevention had found viral nucleic acid on the doorknob of a patient's home, which made everyone pay more attention to disinfection.

Among various disinfection methods, medical alcohol and 84 disinfectant have good virus-killing effects, are easy to produce, relatively cheap, and simple to use. In order to do a good job in epidemic prevention, communities, colleges, shopping malls, etc. have added disinfection products to floor cleaning machine such as sweepers and ride-on washing machines.

floor scrubber manufacturers remind you to be careful about fire protection when using medical alcohol for disinfection

Medical alcohol is a mixed solution of ethanol and water, in which the concentration of ethanol is 75%. Medical practice has proved that this concentration of medical alcohol has the best disinfection effect, which can kill a variety of bacteria and viruses, and can also effectively kill the new coronavirus.

In addition to its use in disinfection, an important industrial use of ethanol is as a fuel. For example, ethanol gasoline is to mix ethanol into gasoline and use it as a vehicle fuel. This also shows that ethanol and gasoline have similar properties. They both have strong volatility and are extremely easy to burn. The floor scrubber manufacturers said that although medical alcohol is not pure ethanol, its concentration is quite high and it has strong flammability. When using alcohol, it must be kept away from fire sources to prevent alcohol from igniting and causing fires.

When using medical alcohol, in addition to not directly contacting the fire source, it is also necessary to prevent combustion and explosion caused by alcohol vapour. The floor scrubber manufacturers introduced that when using medical alcohol, especially when cleaning and disinfecting floor cleaning machines such as sweepers and driving floor scrubbers, alcohol vapour is easily generated due to the strong volatility of alcohol, especially in confined spaces such as In a room with doors and windows closed, alcohol vapour may accumulate and reach the explosion range, and it may burn or even explode when encountering a fire source.

In short, after adding alcohol to the water tank of floor cleaning machines such as sweepers and washing machines, keep it away from fire sources; alcohol stored at home should also be kept away from fire sources, and should not be placed in places close to fire sources such as kitchens.

Jieqi's products have a certain reputation, and washing machines are more secure. We attach importance to quality control and after-sales service. Choosing our products is very cost-effective, saving your company's later cleaning costs and achieving more ideal cleaning results. . As a washing machine manufacturer, Jieqi has a complete pre-sales and after-sales system. From the initial pre-sales consultation to the after-sales series after the transaction, we can solve the whole process for you, and the national warranty will save you from worries. It is your safe choice.

[jieqi5896]

Eight reasons for the noise of electric sweepers

Electric sweepers often appear in public places such as urban residential quarters, street communities, business districts, and pedestrian streets. Of course, they can also be seen often in factories and parks. Electric sweepers can greatly improve the speed and efficiency of cleaning, and the effect of cleaning. Also very good.

Many enterprises and companies can use one electric sweeper to replace multiple manual cleaning work. Sometimes, when companies are difficult to recruit workers, they just solve the problem of difficult recruitment.

The ride on sweeper for sale pointed out that the use of electric sweepers instead of manual cleaning can effectively reduce the cleaning cost of enterprises. After all, an electric sweeper can be used for 2-3 years, and some are equipped with lithium batteries, or even It can be used for 3-5 years. This machine is only equivalent to investing a few hundred dollars every month, and the monthly salary of a labourer is at least more than 2,000 yuan. Therefore, this can be regarded as reducing the cleaning cost for the enterprise.

As the saying goes, "flowers are not blooming in a hundred days, and people are better without a thousand days", and people still know how to adjust themselves, but machines can't, so the machine will fail after long-term use, and some customers have responded that the sweeper has been used for more than a year. When there is a problem with loud noise, how should we solve it at this time? Today, ride on the sweeper for sale will talk about the reasons for the noise of the sweeper.

1. Wiring error;

2. The winding is short-circuited;

3. Individual branches in multiple windings are short-circuited;

4. Broken rotor bars: In a normal running motor, if the stator and rotor windings are short-circuited or the squirrel-cage rotor bars are broken, the motor will emit a high and low humming sound, and the fuselage will also vibrate slightly;

5. The core silicon steel sheet is relaxed;

6. Power

Voltage asymmetry: abnormal sound suddenly appears in the motor in normal operation. During the test with load, the rotation speed drops significantly, and a low roar is issued. It may be that the three-phase current is unbalanced, the load is too heavy or the single-phase operation;

7.  magnetic circuit asymmetry;

8. The motor of the electric sweepers is overloaded.

If the electric sweeper has a loud noise problem, we should contact the ride on sweeper for sale for on-site maintenance and solve the problem as soon as possible, and we must not repair it according to our own feelings.

Jieqi company is committed to the manufacture and production of floor cleaning equipment, products include sweepers, electric sweepers, and automatic floor scrubbers. Clean anytime, anywhere with a sound level of 68 decibels. Cost-saving innovations simplify operations, improve cleaning, and reduce expenses by lowering the cost of ownership. We are the industry leader in floor cleaning equipment, and we are confident to compete with any similar products on the market. Choosing us must be your most correct decision.

[jieqi5896]

What should I do if the noise of the sweeper becomes louder?

No matter the large sweeper or the small sweeper, they are more or less noisy in the process of operation, which is disturbing, especially in public places. For example, schools, hospitals, museums and other places have refined standard requirements for sound decibels. At this time, when purchasing a sweeper, the noise level has become one of the important purchasing reference standards.

The noise of electric sweepers will affect people's regular rest. Although it is unavoidable, we can effectively reduce the noise caused by the sweeper by taking certain measures.

The noise generated by the electric sweeper is determined by its working principle. electric sweepers rely on a vacuum (negative pressure) to suck dust particles into the dust bag, and the vacuum is mainly formed by the high-speed operation of the fan driven by the motor. In the process of high-speed operation of the motor, noise is generated, and the faster the motor rotates, the greater the suction, or the longer it is used, the greater the noise.

The floor scrubber manufacturers suggested that if the motor of the electric sweeper is noisy, this problem may be more difficult, because the motor is in the centre of the equipment, and it is impossible for us non-professionals to "anatomy" the motor. After a long-term operation of the motor, the noise may become louder to a greater or lesser extent, and some problems such as internal ageing occur due to the long service life, and these problems will cause the noise to become louder. In view of this situation, the best way is to go to the floor scrubber manufacturers for maintenance.

In addition, the floor scrubber manufacturers said that it is impossible for a large sweeper or a small sweeper to be completely silent, as long as the noise it produces is not harsh, which is normal, after all, it brings us more convenience. The electric sweeper can be cleaned manually on a regular basis to see if it works. At this point, the floor scrubber manufacturers remind us that we must frequently maintain the equipment for subsequent use when using the electric floor sweeper.

With the mission and responsibility, Jieqi has developed a series of cleaning equipment products with a sense of the times to meet market demand, scenario-based applications, and experiential services. It will be officially launched into the market in 2021. Competitive products, feedback and many other aspects are improved and improved, focusing on users, and taking the initiative to attack the market, taking the lead in taking the quality and service advantages as the main marketing line, combining innovation, giving a "forced needle" to the chaotic market, the response is excellent.

[jieqi5896]

Improper operation has serious consequences

The emergence of chemical plants can improve people's daily life, but chemical plants are also prone to pollution problems. All countries have very high cleaning standards for chemical plants. Factory floors are cleaned to meet standards. Of course, the industrial ride on floor scrubber can not only improve the cleaning requirements but also can replace the manual cleaning, which can bring benefits to the factory while saving labour costs.

Although the industrial ride on floor scrubber has many advantages, if the operation is not correct and non-standard, it is easy to cause different degrees of damage to the washing machine, which will also increase the factory cost when it is sold. Today, professional driving-type washing machines are used. The staff of the ride on floor scrubber for sale came to organize somehow to regulate the use of floor washing machines.

1. When the factory buys a new washing machine, it should not operate the washing machine without permission before it is assembled. It should read the operation manual first and have a preliminary understanding of the washing machine because different types of washing machines are operated. are all different. Now many brand washing machine manufacturers are delivered to their door, and then professional floor washing machine staff train the factory cleaning staff to operate the washing machine so that the cleaning staff can get started faster when using the industrial ride on floor scrubber. ride on floor scrubber for sale with this service, making customers more satisfied.

2. When cleaning the chemical floor, it is necessary to perform a simple cleaning on the floor first, so that the water-insoluble large particles, metal wires, lathe waste, small stones, etc. can be removed, because the rubber strip needs to form a seal on the floor. Only when there is enough space, the sewage can be recycled, otherwise, working without closing will greatly affect the work efficiency.

3. If the chemical floor is very dirty, it is recommended to use different cleaning agents to meet the cleaning requirements. If the cleaning ground is uneven, do not push the driving scrubber directly, it may cause the scrubber to collide and cause damage, and the operator needs to judge the ground. To properly clean the chemical plant floor, these specifications are essential. After understanding these specifications, the use of a ride on scrubbers can better improve work efficiency and greatly increase the use of ride on scrubbers. life.

Jieqi's industrial ride on floor scrubber is a product that conforms to national policies, meets the needs of the development of the times, and will inevitably become an important part of society. The company is committed to becoming a first-line brand of global new energy clean sanitation equipment manufacturing service providers, building an IoT ecosystem, and providing equipment and operation solutions for environmental operation companies, property companies, and enterprise units. Continuously develop new intelligent products, replace manual cleaning with machines, and improve the overall operational efficiency of customers.

[jieqi5896]

The washing machine suddenly stops rotating during use?

As common cleaning equipment, the floor cleaning machine is playing an increasingly important role in the cleaning work of enterprises and factories, and more and more people prefer to use the floor cleaning machine to help us complete the cleaning. In the long-term use of a piece of mechanical equipment, failures and faults are unavoidable.

The floor cleaning machine manufacturer introduces what to do if the floor cleaning machine brush plate does not rotate during use:

First check if this is a battery problem. If the floor cleaning machine has been used for more than a year, then this problem must exist, that is, the battery storage power becomes smaller, and the power of the floor cleaning machine is insufficient. Please charge the floor cleaning machine first. For more than 12 hours, the basic floor cleaning machine can be solved if the brush plate does not rotate when the machine is turned on. If it is fully charged and the brush plate works, it is the problem of the battery. Whether the switch of the floor cleaning machine brush plate is in the on position, check whether the switch is turned on on the control panel of the floor cleaning machine, the battery of the floor cleaning machine is exhausted and needs to be recharged.

Secondly, consider whether it is a wiring problem. There is another possibility that the brush disc of the floor cleaning machine does not rotate, that is, the wiring problem. From the switch of the brush disc of the floor cleaning machine to the wiring of the motor below, it must be checked. Due to the ageing problem of the line, the brush plate of the floor cleaning machine will not rotate. Just check the line responsible for flashing the disk, and you can leave the others untouched so that you can find out whether it is a problem with the line.

floor cleaning machine manufacturers say there may also be a problem with the brush plate of the floor cleaning machine. Check whether the motor is ageing and the brush disc does not rotate, the brush disc motor of the floor cleaning machine is overheated and shut down or the motor of the floor cleaning machine is overloaded. It is necessary to turn off the motor switch of the floor cleaning machine and use it after cooling for 45 minutes. If the brush plate motor is damaged, the motor needs to be replaced in time. Check whether the carbon brush of the brush plate motor of the floor cleaning machine is worn. If it is worn, replace the carbon brush and it can be dealt with. You can also take out the original carbon brush, adjust the orientation, and continue to use it.

Finally, the gearbox of the floor cleaning machine is damaged, and the gearbox needs to be replaced. The motor of the floor cleaning machine is damaged, and the motor of the floor cleaning machine needs to be replaced. The motor fuse is burned out, and the fuse is returned after the cause is found.

Insufficient water in the clean water tank of the floor cleaning machine, fill in clean water.

If the above problems are checked and there is no problem, and the floor cleaning machine still cannot operate normally, then you should contact the floor cleaning machine manufacturer for after-sales service, and ask professionals to help you solve it.

The floor cleaning machine will lead the cleaning equipment industry to bid farewell to the current situation of low cleaning efficiency and high operating costs and will open a new era of intelligent and humanized cleaning.

As a professional floor cleaning machine manufacturer, Jieqi has become a modern enterprise integrating R&D and design, mould manufacturing, automated production, machining, product assembly and sales. It is the earliest domestic manufacturer of electric sweepers and electric sweepers. factory. Jieqi currently has 3 major factories, 2 major product R&D centres, 5 wholly-owned subsidiaries, and has nearly 100 service centres around the world, covering a full range of ride-on sweepers, ride-on washing machines, and industrial ride-on floor scrubbers and other products. We not only provide you with high-quality products but also provide you with one-stop product services. From the introduction of the product structure, and detailed instructions for use, to the regular maintenance of the product, as well as the later after-sales maintenance, our service guarantees your satisfaction. Choose our products, only with peace of mind, peace of mind and peace of mind.

[jieqi5896]

Can a chemical plant be cleaned with a floor cleaner?

floor cleaning machines are used in the field of factory production and can contribute to the production scale of the factory and the area that actually needs to be cleaned, ground conditions, cleaning standards, etc.; as a leader of a production enterprise, it is also necessary to properly understand some basics of floor cleaning machine equipment Common sense of the situation, according to your own conditions and requirements, choose the cleaning equipment that suits your business. Choosing a good floor cleaning machine can not only bring excellent cleaning effect, improve corporate image and safety, but also reduce costs and improve work efficiency.

The emergence of chemical plants can improve people's daily life, but chemical plants are also prone to pollution problems. The cleaning standards of chemical plants are very high. Therefore, many chemical plants now use industrial floor cleaning machines to clean the factory floor. to meet the standard. Of course, the floor cleaning machine can not only improve the cleaning requirements but also can replace the manual cleaning, which can bring benefits to the factory while saving labour costs.

In the past, all the cleaning in our factory workshop was done manually. The workshop area is large, and the floor area to be cleaned is also large, which is also a big challenge for the cleaning staff. The floor cleaning machine manufacturer pointed out that the floor cleaning machine used in the workshop can clean the floor very well. A floor cleaning machine is a machine that combines washing and drying. It has a simple structure and is very easy to use. It is also very convenient for cleaning personnel to operate.

For the operator, in order to maintain a good working environment for a long time, the factory assigns a special person to use the floor cleaning machine to clean the floor of the workshop every day to ensure that the floor of the workshop and warehouse is free of debris, sewage, dirt, dust and other phenomena. The factory floor cleaning machine can protect the environment of employees for a long time, and the floor cleaning of the factory is carried out through the floor cleaning machine, which not only cleans the company comfortably and cleanly, but also provides a beautiful and clean working environment for factory workers. A good image enhances the cohesion and coordination of employees, and such a factory can become a stable factory.

floor cleaning machine manufacturers said that many chemical plants now use floor cleaning machines to clean the workshop floor. Whether it is a hand-push floor cleaning machine or a ride-on floor cleaning machine, it can bring excellent cleaning effects to chemical plants and improve safety. At the same time, it can reduce costs and maximize work efficiency.

In the factory workshop area to be cleaned, it should be cleaned first. It is recommended to use a hand-push sweeper, mainly for some non-water-soluble large particles, wire, lathe waste, small stones, etc., and others that will affect water absorption The reason is that the squeegee must form a closed space with the ground to recycle the sewage, otherwise, it will not work properly if it is not closed, which is of great benefit for you to improve work efficiency and protect the factory floor cleaning machine.

For the cleaning of the painted floor and epoxy floor in the chemical plant workshop, the floor cleaning machine manufacturer reminds the floor cleaning machine to operate the floor cleaning machine correctly. The living and working environment of the staff, through the correct operation specifications of the floor cleaning machine used in the chemical plant in the above three points, can effectively improve the work efficiency in a timely manner, and greatly increase the service life of the floor cleaning machine.

The floor cleaning machine cleans the floor of the chemical factory workshop. It only needs to hire a small number of operators, and it can be cleaned quickly. Not only can it save a lot of labour costs, but the working environment of workers will also be greatly improved. Among Gaomei's customers, many do not even need to hire special cleaning personnel. The enthusiasm of the workers to use the floor cleaning machine to clean the workshop is generally high. The cleaning of the workshop can be completed shortly after getting off work, and it will hardly take up any working time.

Jieqi Environmental Protection's products include ride-on sweepers, ride-on scrubbers, and industrial ride-on floor scrubbers. We not only provide you with high-quality products but also provide you with one-stop product services. From the introduction of the product structure, and detailed instructions for use, to the regular maintenance of the product, as well as the later after-sales maintenance, our service guarantees your satisfaction. Choose our products, only with peace of mind, peace of mind and peace of mind.

[jieqi5896]

What if the suction motor of the scrubber doesn't turn?

Now in some stations, airports, workshops, schools, hospitals and other places, the shadow of the floor cleaning machine can be seen. I believe that most users often encounter one or another problem with the failure of the floor cleaning machine in the process of using the floor cleaning machine, so what should I do if the suction motor does not rotate? floor cleaning machine manufacturer to answer your questions.

1. First, check whether the brush disc motor of the floor cleaning machine is overheated and shut down or the motor of the floor cleaning machine is overloaded. At this time, you need to turn off the motor switch of the floor cleaning machine and use it after cooling for 45 minutes.

2. Next, check whether there is a problem with the line of the floor cleaning machine.

The floor cleaning machine manufacturer says to check the wiring from the switch on the brush plate of the floor cleaning machine to the motor below. Due to the problem of line ageing, it will also cause the brush plate of the floor cleaning machine not to rotate. Just check the line responsible for flashing the disk, and you can leave the others alone so that you can find out whether it is a problem with the line.

3. The suction motor of the floor cleaning machine enters the water and burns.

In the use of the floor cleaning machine, if the sewage tank does not discharge the sewage in time so that the sewage in the sewage tank of the floor cleaning machine exceeds the warning position, the sewage will extend the suction pipe into the suction motor, causing the Floor cleaner suction motor burned out. If there is too much detergent foam in the sump tank, it will also cause the foam to be sucked into the suction motor of the floor cleaner, causing the suction motor to burn out. Therefore, we should always observe the sewage level and foam situation in the sewage tank of the floor cleaning machine. Drain the sewage in time and fill the antifoaming liquid in the sewage tank.

4. There is another situation that is easily overlooked. If there is no water in the cleaning tank, or there is garbage in the pipe, the water pipe is blocked, which will also cause the brush plate to not work.

As common cleaning equipment, full-automatic floor scrubbers play an increasingly important role in industrial and commercial cleaning work, and more and more people prefer to use floor cleaners to help us finish cleaning. The full-automatic floor scrubbers produced and manufactured by the floor cleaning machine manufacturer are an indispensable 'cleaning artefact' at present.

Jieqi's products have a certain reputation, and full-automatic floor scrubbers are more secure. We attach great importance to quality control and after-sales service. Choosing our products is very cost-effective, saving your company's later cleaning costs and achieving more ideal cleaning results. . As a floor cleaning machine manufacturer, Jieqi has a complete pre-sales and after-sales system. From the initial pre-sales consultation to the after-sales series after the transaction, we can solve the whole process for you, and the national warranty will save you from worries. It is your safe choice.

[jieqi5896]

Introducing the roller brush and disc brush of the scrubber

Nowadays, the emergence of floor cleaning machines has helped small and medium-sized enterprises to solve many cleaning problems, and the working efficiency of cleaning equipment has many advantages over manual cleaning. In factories, shopping malls, stations, etc., for some places that need to be cleaned of oil or incomplete cleaning, manual cleaning is far from ideal.

At present, the electric floor cleaning machines on the market have two brushes, namely the brush disc and the roller brush. Although they are all accessories on the floor cleaning machine equipment, their functions are different. Floor cleaning machine manufacturers bring Do you know how they are different?

The problem of uneven ground treatment is the real nemesis: the traditional disk brush can achieve a better treatment effect on the ground with a relatively flat surface, but when the ground is uneven or there are gaps in the material because the disk brush is used as a surface as a whole, it is difficult to treat the recesses. The surface is effectively treated, and the entire surface has been unevenly stained for a long time.

The difference between the roller brush and the disk brush: Compared with the traditional disk brush, the roller brush design structure of the floor cleaning machine has been greatly changed. The equipment replaces the original disk brush with two relatively moving cleaning roller brushes so that the equipment can The effective area of the ground to be treated has changed from the original whole disk brush to two narrow roller brushes so that under the same weight conditions, the purpose of increasing the processing power of the ground unit by seven times is achieved. People naturally obtain the traditional disk brush. The obtained ground treatment effect.

The disc brush is a large brush, which is essentially the same as the brush that people use when washing shoes. The difference is that the disc brush is round. wash. The roller brush and the disc brush can be said to be completely different. The roller brush has undergone great changes in structure. The equipment replaces the original disk brush with two relatively moving cleaning roller brushes so that the effective area between the equipment and the treated ground changes from the original entire disk brush to two narrow roller brushes. Therefore, under the same weight condition, the purpose of increasing the processing power of the ground unit by seven times is achieved, and people naturally obtain the ground processing effect that cannot be obtained by the traditional disc brush.

floor cleaning machine manufacturer introduces the comparison of the roller brush and disc brush functions of the floor cleaning machine:

Anyone who has used a full-automatic floor scrubber knows that there are two brushes in the full-automatic floor scrubbers, namely the roller brush and the disc brush, and different places and grounds need to use different brushes. Features, so today I will ask you to briefly introduce their features:

The advantages and disadvantages of the floor cleaning machine roller brush and disc brush:

1. The rotating speed of the roller brush is higher, and the cleaning effect is better when it is aimed at the uneven ground.

2. The roller brush has a certain pre-sweeping function, which can realize the function of sweeping and washing.

3. The ground pressure generated by the roller brush is smaller than that of the disc brush, so the service life is longer.

4. Roller brushes are usually more expensive than disc brushes.

5. The pressure on the ground generated by the disc brush is greater, and the cleaning effect on the smooth ground is better.

6. The brush plate can be easily installed and removed without any tools.

7. The disk brush has a wider cleaning range and can clean the lower edges of shelves and walls.

8. The rotating speed of the disk brush is lower, and the energy consumption per unit time is lower.

9. The disc brush can be equipped with a needle holder, and cleaning pads of different materials can be selected for different floors.

With its mission and responsibility, Jieqi has developed a series of cleaning equipment products with a sense of the times to meet market needs, scenario-based applications, and experiential services. Competitive products, feedback and many other aspects have been improved and improved, focusing on users, taking the initiative to attack the market, taking the lead in taking quality and service advantages as the main marketing line, combining innovation, giving a "forced needle" to the chaotic market, the response is very good.

[jieqi5896]

Common faults and precautions of full-automatic floor scrubbers

In the process of using the full-automatic floor scrubbers, the machine may malfunction due to the wrong operation. Mastering some simple troubleshooting methods can make the cleaning effect and cleaning efficiency of the fully full-automatic floor scrubbers not be affected by some small reasons. Therefore, it is necessary for the operator to simply understand the troubleshooting methods for the common faults of the full-automatic floor scrubbers.

Generally speaking, there are only a few common faults that affect the cleaning effect of the automatic floor scrubber. The brushes and squeegees, as wearing parts, are the most prone to problems. In the stage of using for some time, when the brush plate and squeegee of the full-automatic floor scrubbers are worn to a certain extent, they must be replaced in time. If the brush plate of the full-automatic floor scrubbers cannot be rotated, the full-automatic floor scrubbers should be checked first. Whether the amount is sufficient, whether the fuse is blown, whether the brush motor is damaged, if the brush motor is damaged, please contact our after-sales department in time.

The deterioration of the water absorption effect of the automatic floor scrubber is also one of the common faults. When the automatic floor washing machine does not absorb water, or the water absorption effect becomes poor, we must first check whether the sealing condition of the automatic floor washing machine is in good condition. The ground machine uses a water suction motor to suck the air in the sewage tank, thereby reducing the air pressure and achieving the effect of water absorption.

If the sewage tank is not sealed well and the sewage pipe is not tightly covered, it will naturally affect the water absorption effect of the automatic floor scrubber. If the seal is good, we should check that the squeegee is clean and the sewer pipe is not clogged, all of which may lead to poor water absorption.

If it is not caused by the above reasons, then check whether there is a problem with the suction motor. If the suction motor is damaged, please contact the floor scrubber manufacturers in time, and the floor scrubber manufacturers will help solve it after-sales.

The floor scrubber manufacturers summarize the above are the most common faults and treatment methods of automatic floor scrubbers.

Precautions for the use of the full-automatic floor scrubbers:

1. The device uses about 2 grids of electricity to start charging, and the charging time is 8-12 hours!

2. It is forbidden to operate when there is garbage on the ground. Clean the garbage before cleaning. Otherwise, the suction rake and suction pipe will be blocked, and in severe cases, the brush plate, motor and suction strip will be damaged.

3. It is forbidden to go over the speed bump and reverse the vehicle during operation, raise the brush plate and squeegee, and continue the operation after passing or reversing.

4. If a cleaning agent such as neutral all-purpose water is added to the water tank, a defoamer must be added to the sewage tank, otherwise, the foam generated during the cleaning process will be sucked into the motor, which will cause the motor to burn. (It is forbidden to use washing powder and detergent in the freshwater tank)

5. When the automatic floor washing machine is working continuously, it is necessary to discharge the sewage in time, and it is forbidden to have a full tank of sewage.

6. It is forbidden to charge under high temperatures, scorching sun and sun exposure. Keep the charger dry and do not get water!

7. Regularly clean the water suction rake and suction pipe of the equipment to avoid foreign matter blocking the pipe and affecting the water absorption effect.

8. Regularly check the water-absorbing rake screws to avoid rusting caused by moisture and the water-absorbing tape cannot be replaced.

9. Check the filter regularly. Sometimes, the filter will be blocked due to impurities, which will affect the outflow of water during the process of cleaning the ground.

10. Empty and clean the sewage tank of the full-automatic floor scrubbers when the work is completed every day.

11. When cleaning the machine, remember not to directly rinse the machine with water, just wipe it with a rag!

Jieqi is committed to floor cleaning equipment, and the products it produces and manufactures include ride on sweepers, ride-on scrubbers and automatic floor washers. Our company adheres to the principle of the trinity of products, services and after-sales, and hopes to bring you a better user experience after-sales service. We not only provide you with high-quality products but also provide you with one-stop product services. From the introduction of the product structure, detailed instructions for use, to the regular maintenance of the product, as well as the later after-sales maintenance, our service guarantees your satisfaction. Choose our products, only with peace of mind, peace of mind and peace of mind. Driving sweepers, industrial driving full full-automatic floor scrubbers, etc. are all new energy vehicles, pollution-free, zero-emission, and keep urban roads clean at all times.

[jieqi5896]

If the washing machine charger won't charge

Most of the Ride on scrubber on the market are electric-assisted, which not only has high cleaning efficiency but also saves time and effort to use. However, once the battery or charger fails, the ride-on scrubber will also be affected and cannot function normally. After using it, what should I do if it cannot be charged? The following washing machine manufacturers will give you a simple analysis.

floor scrubber manufacturers - Damaged Battery

In the process of using the washing machine battery, problems such as water immersion, long-term power loss, or improper charging of the battery will cause serious damage to the battery in the short term, so we must maintain and maintain the battery in daily use. When the battery is seriously damaged, please contact the manufacturer for repair or replacement in time.

battery system failure

When the battery has a system failure, it will also not be able to be charged. At this time, we can boot into the recovery mode, select the advanced mode of advance, select wipeBattery, and clear the battery traces; if the operation still cannot be resolved, you can try to restore the factory settings. Check to see if it is a system cause.

Faulty charger or bad contact

Check whether there is a problem with the battery. If there is no problem with the battery, it is necessary to check whether the charger is faulty or the contact is poor, and contact the manufacturer to replace the suitable charger in time to avoid affecting the use of the battery due to the problem of the charger.

The battery is not properly connected to the charger. Check whether the welding port falls off at the connection between the battery and the charging port. In this case, you can use a multimeter to directly measure the output port of the battery. Check whether there is voltage, if there is a problem, you can find a high-power Luotie to weld it back, or contact the manufacturer for maintenance.

floor scrubber manufacturers - Battery Life is Too Long

The acid lead battery of the Ride on scrubber has a limited service life and generally needs to be replaced in about two years. When the battery cannot be charged, the battery needs to be replaced in time.

floor scrubber manufacturers - Charger Aging

The charger will be aged during long-term use, and the electronic components will be unstable. After a period of use, the components may be burned, resulting in abnormal output voltage. It should be replaced in time to avoid affecting the battery.

All in all, the failure of the washing machine charger to charge is either a battery problem or a charger problem. In this case, the cause of the problem should be checked in time to avoid long-term failures affecting the service life of the battery.

It is not accidental that Jieqi's full-automatic floor scrubbers are favoured by the cleaning industry, but an inevitable result of technological development. Every industry will become easier and cleaner, and cleaners will become more efficient and labour-saving to complete their work. The full-automatic floor scrubbers create a clean and comfortable working environment and improve the cleaning efficiency of employees. The full-automatic floor scrubbers are easy to use, flexible and convenient to operate and can be easily driven for cleaning. With the development of the times and the rapid changes in technology, the full-automatic floor scrubbers have also been rapidly improved. The performance of the current domestic full-automatic floor scrubbers is completely comparable to that of foreign factory washing machines.

[jieqi5896]

The scrubber charger alarms during the charging process?

The full-automatic floor scrubbers batteries on the market are generally divided into three types of batteries: liquid-filled batteries, lead-acid valve-controlled batteries and colloidal batteries. Different batteries have fixed chargers. The full-automatic floor scrubbers battery chargers are generally not It is easy to be damaged, but some users report that the battery charger used frequently fails. The floor scrubber manufacturers summarizes the following three reasons for the frequent failure of the battery charger of the full-automatic floor scrubbers:

1.The charger fan is faulty. This fault is one of the common faults of many brands of chargers. Only a few chargers do not use fans for heat dissipation. Today, most chargers use fans for heat dissipation. , but if the quality of the fan is not good enough, the fan will not turn, and this situation will easily cause the temperature in the charger to be too high to burn out the motor and other accessories;

2. The voltage is unstable. The charging voltage and charging curve of different batteries are different. Generally speaking, the charging voltage requirements required by the liquid-filled battery, the lead-acid valve-controlled battery and the gel battery are sequentially reduced. When a liquid battery charger is used to charge a gel battery, the long-term high voltage will exceed the charging requirements of the gel battery, resulting in battery bulging. The liquid battery is in a situation of long-term starvation, which causes the battery to gradually lose its vitality. At this time, if we use the charger to charge the battery, it is very likely that the charger will be damaged because the voltage is too low;

3. Use the automatic floor scrubber in a dusty environment, especially the dust generated in the workshop contains metal dust. These metal dust can easily accumulate on the circuit board of the charger through the heat dissipation holes of the charger, resulting in Charger circuit board components are short-circuited, etc.

The summary and analysis of the floor scrubber manufacturers tells us that when charging the battery, we must use a good quality charger, and keep the voltage stable and use it in a clean environment.

As one of the important accessories in the battery equipment of the full-automatic floor scrubbers, the charger is sometimes in the process of charging, what should I do if the charger suddenly alarms? At this time, we should not panic, we must immediately unplug the charger and cut off the power in time. Check that the voltage of the power outlet is the same as that of the battery charger, and that the transformer inside the charger is installed correctly. When the electric scrubber battery charger fails to work, please ensure that the working voltage is normal, replace the blown fuse, and check the output current.

The full-automatic floor scrubbers is used continuously for a long time, and the workload is too large, resulting in insufficient battery capacity and unable to complete the corresponding work. This situation is not a quality or installation problem, it can be solved by replacing the high-capacity battery or using another charged battery.

The service life of the electric full-automatic floor scrubbers has a lot to do with the battery in it. The manufacturer of the washing machine hopes that everyone will pay attention to the daily use specifications of the battery while using the full-automatic floor scrubbers, so that the full-automatic floor scrubbers can be fully automatic. The ground machine will serve us for a longer time.

The full-automatic floor scrubbers of Jieqi Company has accelerated the change of the new way of cleaning, and also brought great convenience to cleaning. Our life will become wonderful with it, because the characteristics of high efficiency, energy saving and environmental protection of automatic floor washing machine are undeniable. It will bring greater convenience to the life of the country, and can better promote the country's development and rapid progress. As the competition pressure of the washing machine market continues to increase, how should the washing machine enterprises gain a firm foothold or become a dominant position in this industry, this is what enterprises need to explore. Our company's products include ride on scrubber machine, electric sweepers, etc.

[jieqi5896]

Do you know how to get the scrubber strips?

floor cleaning machine are becoming more and more mature in the domestic market, which also brings convenience and discounts to the majority of users. The rubber strip of the washing machine is the consumable of the washing machine. The function of the squeegee of the washing machine is to contact the ground to generate a sealed space, and some sewage scraped from the ground by the rubber strip is recycled by the fan. The absorbent strip is a fragile consumable and will be replaced frequently if it is used frequently.

The absorbent strip is an important part of the squeegee of the washing machine. Its function is to contact the ground to create a sealed space, and the sewage on the ground can be recycled through the vacuum fan. It can be seen that the quality of the absorbent strip of the automatic floor washing machine also determines the quality of the clean floor hygiene.

The absorbent strip of the washing machine is installed on the squeegee, which is used to recycle sewage and detergent against the ground. After using for a period of time, the rubber strip will be worn due to friction, which will affect the water absorption effect, so please check the condition of the rubber strip frequently.

First of all, you should understand the material of the absorbent strip of the washing machine. Natural rubber is generally used for good quality, rather than other synthetic plastics. The softness and wear resistance of natural rubber are better, and the water absorption effect is better. In addition, the absorbent strip of the washing machine can also be divided into oil-resistant type and oil-intolerant type. As the name implies, the oil-resistant type is often used on oily floors, but the wear resistance is relatively poor, and the wear resistance of the oil-resistant type is relatively strong. Therefore, when purchasing, you need to distinguish the categories to buy, so as not to buy inappropriate ones and waste money.

Secondly, the thickness of the absorbent strips used by different brands of washing machines is also different, and generally thicker ones are more durable. This is also what we should pay attention to when purchasing.

The floor scrubber manufacturers said that the life of the rubber strip of the washing machine is determined according to the degree of wear and tear. There is no certain time. The surface finish and whether it is wiped clean and maintained after use will affect the use time of the rubber strip. The rougher the ground, the faster the strip wears out.

In addition, according to the quality of the strip, the time it takes to wear out is also different, and the washing machine absorbent strip is not only made of ordinary rubber materials. The material of the washing machine strip is divided into three types: natural rubber, anti-rust latex, and polyurethane. Different materials determine the different uses of the water-absorbing strip.

Inferior water-absorbing strips are made of ordinary rubber material, and the hardness is relatively hard, resulting in incomplete sewage recovery and rapid wear. High-quality absorbent strips are made of high-performance materials such as natural rubber and imported polyurethane, with moderate hardness, tear resistance, acid and alkali resistance, oil resistance, strong scraping water, and not easy to wear. There are two types of water-absorbing adhesive strips: oil-resistant and ordinary oil-resistant. It is more suitable to choose oil-resistant rubber strips when there is oil on the ground. The oil-resistant rubber strip is slightly harder and can withstand oil corrosion, but has poor wear resistance.

JIEQI is committed to floor cleaning equipment, and the products it produces and manufactures include electric sweepers, ride-on scrubbers and automatic floor washers. Our company adheres to the principle of the trinity of products, services and after-sales, and hopes to bring you a better user experience after-sales service. We not only provide you with high-quality products, but also provide you with one-stop product services. From the introduction of the product structure, detailed instructions for use, to the regular maintenance of the product, as well as the later after-sales maintenance, our service guarantees your satisfaction. Choose our products, only with peace of mind, peace of mind and peace of mind.

[jieqi5896]

Why is the wiper of the washing machine scratched?

Nowadays, the use of full-automatic floor scrubbers is becoming more and more popular, and it can be seen everywhere in factory workshops, large hospitals, station airports, large supermarkets and shopping malls. However, it is inevitable that the cleaning will not be clean. What's the matter with scratches on the wiper? How to solve?

The cleaning effect of the automatic floor scrubber is inseparable from its accessories. If there are problems with the accessories, the cleaning effect will be poor.

The scrubber mainly relies on the brush plate to scrub the ground. If the brush plate is not clean or the brush plate is damaged or the brush plate is not equipped properly, it will affect the cleaning of the floor washer.

The absorbent strip is also a more important factor, and the strip is damaged or dirty, which will also affect the cleaning effect.

Filters, sewage recovery pipes, and water tanks are also related factors that reduce the cleaning of automatic floor scrubbers. Of course, there may also be situations where the cleaning personnel operate improperly, which is also the reason for the weakening of the cleaning effect. Not only that, improper operation will damage the washing machine and shorten the service life of the washing machine.

The automatic floor washing machine not only needs the correct operation method, but also needs to be used correctly and reasonably according to the ground conditions, but also needs to do regular inspection, cleaning and maintenance work. Only in this way can the cleaning effect of the automatic floor washing machine not be weakened, and the automatic floor washing machine can have high working efficiency, fast cleaning speed and long service life.

How to adjust the squeegee of the washing machine is the most convenient

When we use the washing machine, we usually clean the ground by the brush plate, and then the squeegee is responsible for collecting and processing the sewage on the ground, so that the ground will become cleaner, but in order to achieve and ensure the best water absorption of the washing machine In effect, we need to keep the squeegee of the washing machine clean. If the adjustment method of the squeegee of the washing machine is incorrect, it will lead to the poor water absorption effect of the squeegee of the washing machine, and it is easy to cause the squeegee of the washing machine to not absorb water or leak.

The design principle of the Micro ride on floor scrubber squeegee of each floor scrubber manufacturers is the same, but the structure will be slightly changed, and the changes will remain the same.

There will be small universal wheels on the squeegee. This is the role of the wheel, which is mainly to play a supporting role. The adjustment of the height of the squeegee from the ground needs to be adjusted.

The adjustment of the angle between the rubber strip and the ground depends on the nut on the shovel body, and a suitable angle can ensure a good water absorption effect.

It is appropriate for the adhesive strip to form a 45-degree angle with the ground. The overall adhesive strip and the ground should be about the same degree of fit, and there should be no situation where one side is high and the other side is low.

Both ends of the squeegee will be equipped with universal wheels. Rotating the universal wheels up and down can adjust the height of the wiper strip, and the strip can be adjusted to match the ground. If you want a good water absorption effect, you must check the degree of wear of the rubber strip of the squeegee. If the wear is serious, you need to replace it, and then connect the drain pipe.

Jieqi is a company committed to environmental protection, in line with the principle of serving the public, in order to promote the construction of a community with a shared future for mankind, and manufactures good products such as automatic washing machines that benefit mankind. It is believed that in the near future, artificial intelligence will also be applied to the washing machine. The washing machine no longer needs human control, and can operate by itself like a sweeping robot, returning to its place after cleaning.

[jieqi5896]

What should I do if the washing machine runs out of power soon?

We can always see battery-type washing machines in our daily life, such as shopping malls, supermarkets, stations, and airports. The washing machine is more energy efficient and cost-effective than traditional manual cleaning. But sometimes the floor cleaning machine runs out of power soon after charging. What's going on?

First of all, what we need to understand is the power consumption of the machine itself and the capacity of the battery. However, we cannot simply understand these specific data. For example, it takes 3 hours to fully charge the fully automatic washing machine. Under normal circumstances, it can be used continuously for 4 hours or even 6 hours. We use this as a criterion for judging power consumption and storage power. Below this usage time, it means that the power consumption is fast.

From the battery side, the quality of the battery determines the operating time of the machine. The second is that our daily charging method is wrong, which causes a lot of loss to the battery. Finally, it is the operation of the washing machine itself. For example, if we adjust the speed of the brush plate to the maximum, and adjust all the functions of the washing machine to the maximum value, the power consumption will definitely be faster than usual.

In fact, the impact of the battery charger on the battery of our washing machine is very important. It is easy to charge the battery with an unsuitable or inferior battery charger. The main reason is that the current is too large or the current is unstable. , The lack of current protection and the inability to intelligently cut off power, resulting in a violent chemical reaction inside the battery, generating a lot of heat, causing our battery to bulge and even be scrapped. Therefore, we use the charger to use the original matching charger, and we can't use some inferior chargers for cheap, which is not only unsafe, but also damages the battery of our washing machine.

The floor cleaning machine manufacturer pointed out that when the vehicle cannot be started due to power shortage, the floor washing machine is generally started by using the method of connecting wires. Preparation: - A full-automatic floor scrubbers with electricity and two connecting wires.

Open the hood and battery protection shell of the two vehicles to expose the positive and negative poles of the battery. Whether it is a rescue vehicle or a rescued vehicle, the operation of the battery should be carried out in the state of flameout, and the positive and negative poles of the battery must be confirmed. Take one wire, connect one end to the positive pole of the dead battery, and the other end to the positive pole of the battery. Do not touch the negative pole, there is a danger of short circuit!

Take the other wire, first connect the negative pole of the battery, and then connect the other end to the negative pole of the non-electric vehicle. After the line is set up, the washing machine with power loss can be started. The sequence of disconnection is to remove the negative electrode first and then remove the positive electrode. After starting the power-deficient vehicle, remove the wiring and let the vehicle run for at least ten minutes. During normal use, you can also charge the battery from time to time to ensure that the battery is in a good power supply state.

It is not accidental that Jieqi's automatic washing machine is favored by the cleaning industry, but an inevitable result of technological development. Every industry will become easier and cleaner, and cleaners will become more efficient and labor-saving to complete their work. The automatic washing machine creates a clean and comfortable working environment and improves the cleaning efficiency of employees. The automatic washing machine is easy to use, flexible and convenient to operate, and can be easily driven for cleaning. With the development of the times and the rapid changes in technology, the automatic washing machine has also been rapidly improved. The performance of the current domestic automatic washing machine is completely comparable to that of foreign factory washing machines.

[jieqi5896]

Food and beverage industry cleaning tool - automatic washing machine（2）

full-automatic floor scrubbers - professional cleaning technology, making our food safer and healthier.

The subversive cleaning concept in the cleaning industry, the mode of "pre-cleaning + cleaning later", that is, the front pre-cleaning device is used to clean the garbage and debris on the ground, and then the ground is deeply cleaned by the scrubbing function. In this way, garbage and debris are prevented from being mixed with the scrubbing brush, resulting in poor cleaning effect, and at the same time, damage to the ground caused by garbage entangled on the bristles can be avoided. The multi-function sweeping and washing machine equipped with pre-sweeping function enables efficient cleaning of food and beverage production workshops.

More innovative cleaning technologies to make cleaning operations more efficient and cost-effective. Among them, the water-saving skirt system can reduce the cost of cleaning agent and tap water consumption by 30-50% during the cleaning process, which greatly reduces the cleaning cost while achieving efficient cleaning. The "one-button" green button design makes the operation of the equipment very simple, and only one button is needed to start all functions, which reduces a lot of training time and the cost of damage to the equipment due to misoperation.

In the cleaning of food and beverage factories, due to the addition of sugar raw materials, the ground is prone to mold and other dirt. These mold and dirt are recycled into the sewage tank, which can easily lead to odor in the sewage tank. Hargo's unique silver ion antibacterial water tank can greatly reduce the growth rate of bacteria in the sewage tank.

In the face of narrow corners, the cleaning of the area below the equipment, the unique hand-held suction design can extend the narrow area that the equipment cannot reach for cleaning, so that our cleaning operations have no dead ends.

floor scrubber manufacturers state that squeegee heads are available in different widths to suit your environment.

Main sources and categories of pollutants in food and beverage factories

Dust: Due to the frequent entry and exit of staff and the loading and unloading of transportation equipment such as forklifts, the production workshop brings dust from the periphery of the factory into the workshop. At the same time, due to the frequent friction of forklift tires with the ground, a large amount of dust is generated.

Oil pollution: Because the production of industrial food needs to add a lot of edible oil, and edible oil is volatile and adhesive, it is easy to stick to the ground, causing the ground to be slippery, easily causing the staff to slip, and the wheels of transport equipment such as forklifts slipping. In addition, the mixing of cooking oil and dust makes the dirt on the ground more difficult to remove, and powerful cleaning equipment must be used.

Syrup: Since food and beverages need to be added with sugar as a raw material during the production process, sugar is easily volatilized into the air during heating, and finally adheres to the ground, making the ground sticky and inconvenient for walking. More importantly, sugar is very easy to breed mold. , affecting food safety.

Tire marks: Forklifts and other transport vehicles that carry raw materials and finished products on site, due to high tire pressure and sharp turns, it is easy to leave deep tire marks on the ground. Such marks are difficult to remove manually, and strong cleaning equipment must be used.

Debris, garbage: Food and beverage production requires a variety of food raw materials, some of which will be scattered on the ground, and need to be removed in time, otherwise they will be brought to all corners of the workshop with the movement of the staff. In addition, beverage bottles often fall off the ground and shatter, forming glass slag, which needs to be removed in time, otherwise there will be potential safety hazards for staff and vehicle tires.

As a professional cleaning and sanitation equipment manufacturing service provider, Jieqi has become a modern enterprise integrating R&D and design, mold manufacturing, automated production, machining, product assembly and sales. It is the earliest domestic research and development of electric sweepers and electric sweepers. manufacturer. Jieqi currently has 3 major factories, 2 major product R&D centers, 5 wholly-owned subsidiaries, and has nearly 100 service centers around the world, covering a full range of ride-on sweepers, ride-on washing machines, and industrial ride-on washing machines Ground machines and other products. We not only provide you with high-quality products, but also provide you with one-stop product services. From the introduction of the product structure, detailed instructions for use, to the regular maintenance of the product, as well as the later after-sales maintenance, our service guarantees your satisfaction. Choose our products, only with peace of mind, peace of mind and peace of mind.

[jieqi5896]

Food and beverage industry cleaning tool - automatic washing machine

Creating good sanitation conditions and a good production environment are inseparable from good cleaning equipment. At present, with the rising labor costs, and the effect and efficiency of manual cleaning cannot be compared with equipment, automated equipment instead of manual cleaning is a must in the food and beverage industry. The inevitable trend. More and more food and beverage factories have abandoned the previous mode of mainly relying on manual cleaning, and began to use automatic floor cleaning machine for daily cleaning, creating a good environment for the production of food and beverages.

"People take food as the sky", the food and beverage industry has always been a relatively stable industry. With the continuous advancement of China's urbanization process and the continuous influx of people into cities, the demand for food and beverages has been on a continuous growth trend. While food and beverage consumption continues to grow, food safety has always been a concern of people. In addition to good food requiring good raw materials, the production process and the sanitation of the production environment are also important factors that determine the quality of the final food and beverage products. The safety level of food production is also the highest and most demanding in the production and processing industry.

On-site working condition analysis of food and beverage factories

【Food Factory】

Compared with general production factories, food production factories add oil and sugar to enhance the taste. Therefore, food factories generally have oil and sugar residues on the ground, and at the same time, mixed dust forms dirt on the ground, and these ground dirt are very prone to mold. pose a threat to food safety. The grease attached to the ground can easily cause the on-site personnel to slip, and transport vehicles such as forklifts are also prone to wheel slippage, resulting in safety accidents.

【Beverage Factory】

Beverage production factories are relatively large in scale, and products are often spilled on the ground in their workshops, which are mixed with ground dust to form dirt. At the same time, during the production process, a large amount of sugar often adheres to the ground, which causes the ground to be sticky and breeds a variety of bacteria, which brings hidden dangers to the quality and safety of the final product.

In addition, some of the packaging of beverage products are glass bottles, such as beer. Glass bottles are very easy to fall on the ground and shatter, forming glass slag. If not cleaned up in time, it is easy to puncture the tires of staff and on-site transportation vehicles, bringing hidden dangers to personal safety and vehicle transportation.

To sum up, food and beverage factory workshops are in great need of cleaning equipment for deep cleaning and daily cleaning.

As a professional floor cleaning machine manufacturer, Jieqi has become a modern enterprise integrating R&D and design, mold manufacturing, automated production, machining, product assembly and sales. It is the earliest domestic research and development of electric sweepers and electric sweepers manufacturer. Jieqi currently has 3 major factories, 2 major product R&D centers, 5 wholly-owned subsidiaries, and has nearly 100 service centers around the world, covering a full range of ride-on sweepers, ride-on washing machines, and industrial ride on floor scrubber and other products. We not only provide you with high-quality products, but also provide you with one-stop product services. From the introduction of the product structure, detailed instructions for use, to the regular maintenance of the product, and later.

[jieqi5896]

Manufacturing cost to see the competitiveness of washing machine(2)

The electric drive efficiency is close to saturation, and the cost reduction space is limited

The electric drive consists of three parts: transmission mechanism, drive motor, and inverter. At present, the overall efficiency of the motor and electronic control is about 95% (tram resource data), and the space for cost reduction through efficiency is limited.

1) At present, the transmission mechanism of full-automatic floor scrubbers at home and abroad is a single-machine deceleration, that is, there is no clutch and transmission. In the future, various electric vehicle companies will increase the complexity of the transmission mechanism and reduce the demand for motors and motor varistors.

2) At present, there are three main types of drive motors for vehicles: DC motors, permanent magnet synchronous motors, and AC induction motors.

The decrease in the cost of the motor mainly depends on the main internal components of the motor. The cost of the motor for commercial vehicles is almost proportional to the output torque of the motor. With long motor types, we expect the cost to be difficult to reduce.

3) The inverter is a device that converts DC power into AC power. The higher the inverter supports voltage, the higher the charging power and the shorter the charging time; but at the same time, the charging heat increases a lot, and it is necessary to solve the IGBT module in the inverter. cooling problem.

There are currently 3 mainstream solutions

1) Motor direct drive: the advantage is that the transmission efficiency is very high, the highest is about 95% (the data of the truck home), and the single peak torque duration is short, which is not suitable for long-term operation.

2) Motor + reducer/gearbox drive: The electric drive system is equipped with a reducer/gearbox, which can greatly amplify the motor torque, so the torque of the motor can be reduced, and the resulting motor cost can be reduced by up to more than 50% (Truck Home Data ). In addition, the weight of the gearbox is much lower than that of the motor, so it has certain advantages in reducing weight, but it is not as efficient as the direct drive form.

3) Electric drive axle: The advantage is that the powertrain installation suspension, drive shaft, three-phase line, water pipe and other components are omitted, and the overall weight is lower than that of the gearbox, but the disadvantage is that the unsprung weight is larger, resulting in increased energy consumption and comfort Sexual weakening.

Summary: New energy sanitation vehicles are an emerging product of technological development, but it still takes time to settle; I believe that with the maturity of technology and the improvement of manufacturing links, new energy sanitation vehicles will eventually become the mainstream of the market.

Because the automatic washing machine is small, convenient, safe and low-speed, it is suitable for walking in the streets and alleys, and can cover more back streets and alleys, and improve the mechanized operation ratio of the whole district. At the same time, when carrying out sanitation operations, the noise of new energy vehicles is smaller than that of traditional vehicles, which is more in line with the public's requirements for a quiet and comfortable environment. It not only won praises from the masses, but also for colleagues who have the most contact with vehicles every day, because it is an automatic transmission, there is no need to step on the clutch, the body is also smaller than before, and it is more convenient to operate.

JIEQI is a large-scale professional floor cleaning machine manufacturer integrating R&D, production, sales and service. Professional research and development, production of various types of washing machines, electric sweepers and other equipment. The products sell well in all provinces of the country and are exported to more than 30 countries and regions in the world. We specialize in providing high-quality cleaning equipment and supplies, to ensure the quality of the products for you, so that you can choose with confidence. In addition, it also has a cleaning equipment repair service center with the strength of the cleaning equipment industry, and it is also the official service center of many brands. The strong after-sales support will give you peace of mind.