Text
VXDIAG Subaru SSM3 Fixed 2015 Outback SRVD Issue
I bought the
VXDIAG for Subaru
. I have a 2015 Outback which had thrown a code regarding the Subaru Rear/Side Vehicle Detection (SRVD) System. My plan was to try to clear the code and potentially run the radar calibration process if necessary. Using the process described in the SubaruOutback.org forum
(
https://www.subaruoutback.org/threads/srvd-disabled-fixed-and-dont-trust-the-dealer.500049/
)
I was able to clear the code without needing a recalibration.
After the SRVD disabled, I pulled the bumper cover to see of there was any physical damage. None. I went on Google and did a search for 87611AL00A (Subaru part number for the RADAR units) and found that 87611AL01A or 87611AL03A was a replacement. A place on Ebay had two of the 87611AL01A units from the same car which I bought for $60 each (it was hard to refuse a money-back guarantee). With the bumper cover still removed, installation and testing was simple. The replacement parts worked perfectly. I was so happy not have to do an alignment per above. I also bought all new bumper clips from an on-line Subaru parts place. Most of the old clips were damaged during removal.
The reason the car is on jacks and the tires removed was because this car has factory mud flaps which were difficult to remove with the tires in place. Having the tires off also made seeing what needed to be done to remove the bumper cover easier.
Things to note: A) A more recent version of the VXManager (ver 1.6.2) software is available at the AllScanner site .
B) Some types of system diagnostics only work if the ignition is in either accessory mode or the car is running. I found that this applies to the Radar diagnostics and calibration processes only.
C) The default password for the Wifi on the device is 12345678
http://www.vxdiagshop.com/wholesale/vxdiag-subaru-ssm-iii-multi-diagnostic-tool.html
0 notes
Text
Possible to Program Land Cruiser TPMS IDs with VXDIAG Toyota Techstream?
Background:
Wrongfully assumed loading new TPMS IDs was as easy as my 2006 Land Cruiser.
Vehicle in question is a 2015 LC, 09/2014 build date
First attempt:
Steps I have taken so far
Attempted with Techstream V13 something and a V1.4.1 mini mini cable
Attempted with Techstream V14 something and a V2.0.4 mvci cable
Attempted with Techstream V14 something and a V1.4.1 mini vci cable
Cables connect, Techstream works fine, fails on the same screen when it tries to write sensor IDs to the vehicle, gives t "ground terminal blah blah blah
Throughout this all I can read TPMS codes, read live data, clear codes, all other modules perform normally.
One thing I noticed is that both cables pass the CAN test but both fail the K line and L Line test.
Second attempt:
I emailed Drew Tech regarding their Mongoose cable and they could not confirm or deny that it would allow you to set TPMS IDs on a 2015 LC. That's a little disappointing for a $500 cable.
Third attempt:
I have looked at the Autel offerings but not in depth. A friend of mine got a Autel TS408 and OEM sensor. He was managed to program it to a 2013 LC200. A $250 tool that's a 1 time fee is a lot more my speed than a phone/subscription based service.
Fourth attempt:
Tonight I got my VXDiag VCX Nano for Toyota from vxdiagshop and set it up. Installation was pretty painless, shows up as another VCI option in Techstream once you install the drivers.
What I noticed right away was communication with the vehicle was faster - way faster. even than the 2.0.x mini VCI cable.
I had the most success connecting the VCX Nano to my PC, opening the utility software that comes with the VCX Nano and making sure its all good in the hood, then starting Techstream.
Went to load up my new TPMS sensor IDs and it loaded them quickly and painlessly.
Viewed sensor data and the new IDs are loaded in.
The decision to do OEM sensors programmed through Techstream came down to a few things.
Closest Discount Tire is an hour away, local Mom and Pop shop has always treated me right - but I bought 4 wheels with tires and 4 more tires in the bed of a pickup to them so no option to program my vehicle
I highly value being able to do service myself, even if it means spending lots of money on tools.
I wanted to keep my original wheels and tires mounted and ready to go for winter or just because I want to sell my LC with the OEM wheels and tires, since a set of 5 mounted and balanced Rock Warriors/All Terrains with LC TPMS pull a premium.
Wanted OEM sensors
Subscription based services/tools rub me the wrong way even if they are the cost effective solution.
VXDIAG VCX Nano + 5 Denso TPMS sensors cost me $240.
I learned a lot, and that is priceless.
The TPMS listed by Denso for my 2015 LC do not work. I had to order ones for a 2014. Those program and worked perfectly. I have a Sept 2014 built 2015 LC.
0 notes
Text
無料ダウンロードKsuite 2.53:Kess 5.017 中国クローンでOK
kess 5.017 Chinaクローンに無料のksuite 2.53を提供します。まだKtagクローンでは動作しません。
https://mega.nz/#!Lol0GCZR!nOeibBrssBZGwzzvHAlNozrMV3VkVWIl9P0zBT6dcIo
Kess 5.017 China clone:正常に動作します。
ktag 7.020 clone:現時点ではありません、。
WIN7 32ビットでテストされ、正常に動作しています。
WIN10 64ビットでテストされ、正常に動作しています。
ksuite 2.53 ok reading audi a3 ppd ...
OBDを経由でKESSでMED17.5.5を読みました。
@ sascha965(MHHフォーラム)ありがとうございます。
www.jobdii.jp
0 notes
Text
Will Vident iLink400 Diagnose OBDI Vehicles?
Can Vident ilink400 obd2 scanner scan obd1?
The answer is yes, what you need is one extra OBD1 to OBD2 16pin adapter.
Gift from videntstore:
If you buy Vident ilink400 code scanner, you will have one OBD1 to OBD2 connector for free.
I.E:
14Pin to 16Pin OBD Adapter for BENZ Sprinter
38 Pin to OBDII 16 Pins Adapter For Mercedes
20 pin to 16 pins adapter for BMW
14 Pins to 16 Pins adapter for Nissan
3 Pins to 16 Pins adapter for Honda
22 pin to 16pin adapter for Toyota
17 Pin to 16 Pin Adapter for Toyota
12 Pin to 16 Pin Adapter for Mitsubishi
12 Pin to 16 Pin Adapter for GM
17 Pin to 16 Pin Adapter for Mazda
20 Pin to 16 Pin Adapter for Kia
……(To be upgrading here: http://www.videntstore.com/wholesale/obd-adapters/ )
Does my car have an OBD port?
Does My Car Have OBD-II? All cars and light trucks built and sold in the United States after January 1, 1996 were required to be OBD II equipped. In general, this means all 1996 model year cars and light trucks are compliant, even if built in late 1995.
http://www.videntstore.com/service/will-vident-ilink400-diagnose-obdi-vehicles.html
0 notes
Text
VXDIAG Full Benz No WiFi Connection Solution
Problem:
I have got the vxdiag full with 2TB multi-brand car brand software.
JLR and Porsche WiFi work no problem, but when i run Benz Xentry, it failed to communicate with WiFi (Error: No connections are available).
What can i do?
Solution:
T0 enable WiFi network connection for VXDIAG Full Multi Tool, users have to install NICs driver (Network interface cards driver) for each car software partition.
www.vxdiagshop.com
0 notes
Text
VXDIAG VCX NANO JLR SDD on Win7 32-bit System
Some customer are struggling with installing the JLR SDD software for vxdiag vcx nano interface. The possible reason is the operating system.
VXDIAG JLR SDD software should be installed on Windows 7 32bit operating system only.
Current latest SDD software goes to V158.
Following are come customer reviews on the operating system:
1)
The software installed and opened up, but I couldn't get it to communicate with the car. The seller organized a time to remote into my computer and investigate the issue, and found the OS to be the problem. I re-imaged my computer with 32bit Windows 7 and ran the installer again and it worked like a dream. This tool is extremely useful. I was able to diagnose why my auto stop/start wasn't working within 2 minutes of opening the diagnostic toolset.
2) It works as good as the oem equipment and other aftermarket equipment at five to ten times the price.
3) VXDIAG JLR SDD Software is limited to operating on WIN7 or newer 32-bit operating system. Check your computer first. Excellent customer service however.
4) Initially I struggled in installing the software since it has to be installed on windows 7 with 32x operating system which is hard to find these days. However, after installation the software works well. The help provided by the supplier was superb....
See also:
Free Download JLR SDD V158 for VXDIAG VCX NANO
0 notes
Text
OEM Porsche PIWIS III software update to V38.400
OEM Porsche PIWIS Tester III software released to V38.4 on Nov. 7th, 2019.
Hardware:Porsche Piwis III Tester
OEM Porsche PIWIS Tester III (None-VXDIAG scanner)
Software Version: V38.400.000
Connection: USB connection only
Operating System: based on SSD system
Update method : Send SSD back
Support Vehicle: Support Porsche Models after 2002.
Update method: Send SSD back to run an upgrade
Compatible laptop: comes with a Panasonic CFAX3 Laptop
Language: German English French Italian Spanish Japanese Chinese Russian Portuguese Dutch
Developer Mode: enabled
Note: VXDIAG Porsche PIWIS III software remains V38.300.030.
0 notes
Text
VXDIAG Benz DTS Monaco All Gray Out Solution
Problem:
Hi, i have got a problem. The VXDIAG Benz DTS Monaco software is not working, all optional are grey out with no workspace loaded error..
Possible reason:
You didn't connect VXDIAG Benz C6 device to computer (check the C6 status on the right top of the interface)
Solution:
To use VXDIAG DTS Monaco engineer software, you have to connect VXDIAG C6 Benz VCI with laptop via USB.
Related guide:
How to Set up DTS Monaco for VXDIAG Benz C6?
Video guide: Benz Flash programming with VXDIAG C6 DTS Monaco
https://www.youtube.com/embed/yvqBY4c8JO8?feature=oembed
0 notes
Text
VXDIAG GM Tech2Win Missing Menu Solution
Problem:
Hi, i find there are only 2 function options of on vxdiag gm Tech2win software main menu.
My menu
The correct menu show have more function options, like this
How can i find the missing menu?
Solution:
We assume you set it up on Windows 10 operating system.
Windows XP and Windows 7 32bit system are recommended.
After connect car model you should choose correct software pack.
Feedback:
It works fine on Windows 7 system.
0 notes
Text
Picking a scan/reset/program tool for Porsche BMW Subaru Lexus Volvo
I am having trouble selecting a scan/reset/program tool between Foxwell NT530 and Foxwell NT680.
Cars in collection: (USA versions) 2012 Porsche Cayman R 2007 BMW X3 2005 BMW 330ciC 2005 Subaru Outback 2004 Lexus LX470 2004 Volvo V70R 2002 Mini Cooper S
I am trying to understand the functionality differences between the NT530 and NT680 series tools?
The NT680 appears to say “all cars” does that mean no individual software subscriptions like with the NT530? If so is the 680 simply a NT530 platform and with all cars?
If no individual subscriptions does that mean the NT680 series tools needs an active internet connection each time you plug into a car?
I don’t think I need all the cars in my collection to be available in the tool to start but the download options in the NT530 sounds attractive if the NT530 has all the functionality of the NT680.
Foxwelltool.com reply:
Advice you pick one Foxwell GT60 Plus to scan and reset these cars, which covers all car models.
What a pity is Foxwell GT60 Plus can't program these cars, advice to use Autel MaxiSYS® 908 Pro (about 2300USD).
Thanks.
0 notes
Text
CGDI MB V2.8.7.0はBenz EEPROMの読み書きを追加した
CGDI Prog MB キープログラマーソフトウェアは、2019年8月23日に2.8.7.0に更新されます。
CGDI MB BenzMonster V2.8.7.0 NEW
(2019.08.23)
1.SLK(R171)、Cクラス(W204)、CLK(W207)、E(W212)、GLK、SLS(197)、CLS(W218)機器のEEPROM読み取りおよび書き込み機能を追加しました。
2.1645450708高速取得でパスワードを計算できない問題を修正しました。
3.新しい21DFキー読み取り機能が追加されました。
3.00032638チップリセット機能を追加しました。
0 notes
Text
VXDIAG Porsche PIWIS Tester III Software Update to V38.300.030
The latest Porsche PIWIS III software V38.300.030 has been tested and verified working great with VXDIAG VCX DoIP Porsche Tester III scanner.
Release 38.300.030 08/21/2019
Multi-language: English, US English, German, French, Italian, Spanish, Japanese, Chinese, Russian, Portuguese
Update method: purchase new HDD/SSD
With Developer mode
www.vxdiagshop.com
0 notes
Text
Is VXDIAG VCX Pro Compatible with BMW Benz or DoIP License?
As titled, our customers have asked is it possible to add JLR DoIP license to the VXDIAG VCX Pro green interface.
Note:
VCX Pro (#SP304 3-in-1 & #SP323 7-in-1) Serial Number starts with P71***** is NOT compatible with BMW, Benz, Subaru, Porsche nor JLR DoIP license.
VCX Pro only supports following software license:
GM GDS2 Tech2Win/FORD IDS/MAZDA IDS/VW ODIS/HONDA HDS/VOLVO VIDA/TOYOTA TECHSTREAM/JLR SDD
VCX Pro 7-in-1 comes with all 7 license.You are free to choose any 3 licenses to the 3-in-1 interface.
0 notes
Text
How to Update VXDIAG Full Brands Multi Tool Software?
Question: How do i get the updates? I have received the Vxdiag Multidiag with full brands?
Vxdiagshop.com solution:
1.For BMW and Benz software, the new update is available only when you buy a new HDD/SSD.You should send back the old HDD/SSD, our engineer will burn the new software into HDD for FREE !!!Update is free. But you should bear the delivery cost yourself.
2.For other car software brands (Ford/Mazda IDS, Honda HDS, Toyota Techstream, VW ODIS, Subaru SSM, Porsche PIWIS2, JLR SDD, GM GDS2/tech2win ) Update is free. Pls contact us to get the latest software download link or visit our website "Download" column.
Email: [email protected] Skype: vxdiag.com Whatsapp: 0086-18064450969
0 notes
Text
Toyota Hilux Surf key lost program
From the customer who saw the blog
"Can you create the key for Toyota Hilux Surf ... I've lost everything ..."
In the inquiry, the person says ... It is a fairly old vehicle, but ... and with the declaration, it was requested to tell about the approximate amount of money.
It was a fairly old model vehicle. The first Hilux Surf! It seems to have been released from 1984. Smile, sweat, and left handle! It is a reverse import car. It looks like an unusual vehicle. Immobilizer is not installed.
When I check the stock of the blank key in the work vehicle ... ... I can not find anything that can substitute for sweat, but I can not find it, so I will return to the store. The location was good, close!
The old model vehicle was pretty tough, but it was successfully created! We make two and delivery is completion.
obd2 diagnostic tool,key program
0 notes
Text
VXDIAG Full JLR SDD Software Not Starting After Enter Password Solution
Device: VXDIAG with full brand 2TB HDD
Problem: software not starting after enter SDD user name and password
Possible reason:
You didn't install patch or run offline mode.
VXDIAGSHOP solution:
Run SDD PATCH offline mode (2nd option) before starting SDD software. Shown as pictures below:
Follow steps below to use SDD:
1.Install Patch
Free download JLR SDD software incl. patch
https://mega.nz/#!JUkTCSqI!bWm6Zm7FdcHtWY2OeWaQDAdftNYZWt-NK6q5UevEDFc
2. Enable network connection
3. Run SDD software on the desktop
4. Enter user name and password on the notepad
5. Software is ready to use.
0 notes