ledlightt

[ledlightt]

The daily use of high-pole lights are equipped with manual

Nowadays, night lighting is an indispensable part of our daily life, especially the external night lighting of some office activity places has a very important effect on the overall night environment atmosphere. 

The electrical control system is installed inside the light pole, which can effectively avoid the failure of the lifting movement caused by external factors. The company has a number of patented products IP65 Led street lights fixtures. 

The rain cover can prevent rainwater from entering the inside of the light pole, and prevent the lifting pulley and other parts from being rusted by rain. Various fasteners, washers, clamp rings and other parts are also made of hot-dip galvanized parts or stainless steel.

 At present, the daily use of high-pole lights are equipped with manual and electric lifting control methods, so that the lamp panel can be safely and conveniently lowered to 2. The main steel wire rope is connected with the auxiliary steel wire rope of the lamp panel through the rope splitter, which can avoid the entanglement of the auxiliary steel wire due to the stretching of the main steel wire. 

With the development of society and our high standards for aesthetics, high pole lights. The electrical resistance of the entire grounding system must be no greater than 10. The products are sold all over the country.

[ledlightt]

LED lamps are not as profitable as traditional high-pressure sodium lamps

Due to the lack of understanding of LED products, many people did not make in-depth comparisons.High-pole lamps usually use high-pressure sodium lamps as the main light source, and LED lamps are rarely used. In this contrast, many people will subconsciously choose high-pressure sodium lamps.

However, LED lamps are not as profitable as traditional high-pressure sodium lamps due to manufacturing costs, but the use of LED lamps for high-pole lamps has many advantages. Many high-pressure sodium lamps sold on the market are counterfeit brands, and the fake ones can obtain considerable profits from them. 

Next, the editor of the high-pole lamp manufacturer will tell you what advantages the high-pole lamp uses LED lamps. According to the Philips high-pressure sodium lamp, the price of a full set of genuine 400w is about 500 yuan, and the price of a better 45w LED floodlight is generally not less than 200 yuan.

The brightness of the two qualified 45w LED floodlights is no less than that of 400w sodium lamps. Even if there is no problem with the accessories, the service life of the light source will not exceed 10,000 hour. It is troublesome to lift the high-pole lamp once, and it is often time-consuming and laborious. 

In fact, the price of LED lamps is not as expensive as people think. In the long run, it is cheaper than other lamps because of its long life and low Customize led street lights power consumption, which can be regarded as a long-term benefit from the last investment. 

[ledlightt]

The lamps used on high-pole lamps are high-pressure sodium lamps

Secondly, the price of different light source lamps is different: for LED high-pole lamps, the purchase price of high-pole lamps is completely different if you choose different lamp sources. 

Many people do not understand the difference between these types of light sources when purchasing high-pole lights, so they choose to use more frequently, but the price is relatively cheap, and the light source is not very good. High-pressure sodium lamps, metal halide lamps, and LED lights are commonly used on high-pole lamps, and high-intensity light sources are required in most construction situations.com) on different occasions in our daily lives. 

When choosing a high pole lamp, there will be a certain difference in the price for the different choice of lamps. For the price of high pole lights, IK09 IK10 led street light it can be said that there are low and high prices, and the price difference is still very obvious. 

Therefore, the lamps used on high-pole lamps are high-pressure sodium lamps and Metal halide lamps, although LED lamps can also emit very bright light sources, LED lamps are cold light, and the effect of the light source emitted is not as good as that of high-pressure sodium lamps. 

 For high pole lights, a strong light source must be available during use.is a manufacturer specializing in the production of solar street lights, high pole lights, garden lights, landscape lights, led street lights, more than 15 years of production experience, high quality, low prices, honesty, and welcomes new and old customers Come to consult.

[ledlightt]

So how to set the azimuth angle of solar cell installation more reasonable?

Some people have asked that solar street lights are charged by solar energy, so how to install battery panels to get the maximum charging effect? In fact, we only need to set the angle of the solar panel. Due to the continuous development of renewable energy, more and more people are beginning to face energy conservation and environmental protection. 

So how to set the azimuth angle of solar cell installation more reasonable? Director Wang of the street lamp manufacturer briefly introduces the azimuth angle of the solar street lamp panel for the big brothers and sisters. Azimuth angle of solar panel: Under normal circumstances, the direction due to the south is the direction with the highest sunlight intensity.

Of course, the installation angle of solar street light panels should be within 20° of southwest as much as possible, so that the peak of solar power generation will appear sometime after noon, which is beneficial for more power generation in winter. When installing, it will not have any major impact on the power generation within the range of 20 degrees from the due south. Solar Wholesale led high bay light fixture Manufacturers street lights are one of the many solar equipment on the market. 

Trees and houses may affect the daylighting time of solar panels and affect charging. The only thing we need to pay attention to is that solar street lights should be installed in places with the strongest daylight as much as possible. This is our common sense.At present, the application of solar energy equipment in the market can be described as increasing. 

Compared with traditional roads, solar street lights have advantages such as easy installation, long service life, low maintenance costs, energy saving, environmental protection, and safety. When the solar panel laying area in the south direction is not enough At large, solar panels can also be laid in the east and west directions

[ledlightt]

The surface is treated with imported powder spray

The electric lifting operation is convenient. Beautiful appearance and strong decoration. The length of the lead wire of the manual remote control device is 10 meters. It is required to have sufficient structural strength, which can be easily disassembled and installed. It can directly supply power to the lamp panel and repair the lamps. All connecting parts are made of stainless steel.com] is also equipped with a spare cable.

Gaoyou high pole lamp installation, maintenance and manufacturer-The lift-type high pole lamp [www.5 meters from the ground, which is convenient for maintenance work. The 35-meter high pole lamp is customized by the manufacturer.China 100W led street lights The lamp panel is a steel frame structure, which has been treated by hot-dip galvanizing as a whole. In order to reduce the gear ratio of the worm gear and the worm, and reduce the rising torque, a set of movable pulleys is specially added to make the lifting speed of the lamp panel less than 0.

The material adopts industrial pure aluminum L2 conforming to: GB3190-82, the lamps are integrated design, with independent light source room and isolated electrical room, the surface is treated with imported powder spray, UV radiation resistance, high temperature resistance. When the lamp panel is lowered to the low position, one end of the cable is inserted into the socket of the electrical control system, and the other end is inserted into the junction box on the lamp panel. The lift-type high-pole lamp is equipped with manual and electric lift control modes, so that the lamp panel can be safely and reliably lowered to 2. 

After the lamp panel is raised to the working position, the lamp panel can be automatically taken off, hooked and unloaded by the wire rope. The operator controls the lifting of the lamp panel at a distance of 5 meters, which can ensure the personal safety of the operator. For security and anti-theft, the rectangular cavity is equipped with a sealed door, and a special lock is installed on the sealed door. The main and auxiliary steel wire ropes are made of high-strength corrosion-resistant 6*19 non-rotating galvanized steel wire rope.

Common height of high pole lights: 20-40 meters (25 meters, 30 meters, 35 meters, 40 meters) Middle pole lights: 15-20 meters (15 meters, 18 meters, 20 meters) Material: high-quality low-silicon carbon steel Q235A steel hot-dip galvanized spray (including Si;smooth and flat, without bumps. The lighting area is large, the lighting effect is good, the light source is concentrated, the illumination is uniform, the glare is small, and it is easy to control and maintain. The main steel wire rope is connected with the auxiliary steel wire rope of the lamp panel through the rope splitter, which can avoid the entanglement of the auxiliary steel wire due to the stretching of the main steel wire

[ledlightt]

This kind of lamp is called a double-arm lam

This kind of lamp is called a double-arm lamp. Although these two lamps are not much different on the surface, their functions are quite different. It is usually installed on both sides of adjacent rivers, ramps or wider roads to illuminate road conditions and cause safe driving. Generally speaking, it is installed on a multi-lane green belt. Street lamps can be divided into single-arm street lamps and double-arm street lamps according to their shapes. 

When purchasing, street lamp manufacturers recommend choosing different types of street lamps according to the road needs to achieve the ideal lighting effect. Due to different light sources, single-arm lights can be divided into ordinary sodium single-arm street lights, energy-saving single-arm street lights, xenon single-arm street lights and LED single-arm street lights. Single-arm lights are the most common type of street lights. Taking into account both sides of the road, parts with special lighting requirements will also use this kind of light. 

 After Wholesale Die Casting Empty Led Street Light Housing factory forming, use anticorrosive hot dip galvanizing and spraying treatment.In our daily life, we can see only one light pole, but on both sides of the road, we can see that some light poles will extend two arms at the top and install two lamp heads to illuminate the road on both sides. The two arms of the double-arm lamp have a certain symmetry, which is more abundant than the single-arm lamp, but it is not suitable for installation on a single road condition or narrow road. 

After forming, use anticorrosive hot dip galvanizing and spraying treatment. It looks beautiful, simple and smooth. So what is the difference between single-arm street lights and double-arm street lights? Manager Hu from the street lamp manufacturer will introduce their differences.. Solar energy is also called single-arm solar street light. The weld is smooth and flat. The rod body is made of Q235 low-carbon high-quality steel by one-time bending and welding. 

Due to the different light sources, double-arm lamps can be divided into ordinary sodium lamps, energy-saving lamps, Xenon lamps and LED lamps. It has only one arm and smooth welding. As a derivative of the single-arm lamp, the double-arm lamp has two arms. The installation of solar energy is also called solar dual-arm light

[ledlightt]

The high pole lamp is a new type of environmentally friendly lamps

The light efficiency is high. Now there are high pole lights everywhere, and it has become the most beautiful scenery in the city. In addition, there is no light pollution during use, and it is a green light source. It is precisely because of such advantages that high pole lights make it popular. 

The high pole lamp is an environmentally friendly and energy-saving lamp, its light decay is very small, and it can still meet the road lighting requirements after more than ten years of use. The light of the high pole lamp is unidirectional, which avoids the diffusion of light, ensures the illuminance of the light, and improves the light efficiency. High cost performance, long service life of high pole lights, and does not require excessive maintenance. 

Therefore, the installation of high pole lights is economical and can be used for a long time with only one investment. Such high pole lights are very cost-effective. The high pole lamp not only has good lighting effect, but also has a beautiful appearance and can beautify the environment. How long is the life of high-pole lights? What are its advantages? Let Thousand Degrees Lighting introduce to you: The service life of high pole lights: The high pole lamp is a new type of environmentally friendly lamps, and its service life is very long, even as long as ten years. In short, high pole lights have many advantages, and the use of high pole lights has become a fashion trend. 

The installation is simple, the installation of the high pole lamp is relatively simple, no need to add buried cables, saving installation costs. Die casting led street lamps suppliers Many people ask about the service life of high-pole lights. The light color is uniform, the light color of the high pole lamp is uniform, the brightness is high, and it is not dazzling, which is also of great benefit to human health. Advantages of high pole lights: High pole lights are very common in daily life, and we can often see them in streets, squares, scenic spots and other places

[ledlightt]

LED is always there as an option for you

Whether you are thinking about installing new lighting in home or upgrading the existing one, looking to shine your favorite showcases, or adorn your backyard swimming pool with dramatic lighting, LED is always there as an option for you. LED luminaries are actively creating enchant and colorful environment in every possible sector like industrial, commercial, residential, security, public places, hospitals, automobiles and electronics. LED has registered its presence in widespread area and yet expanding with numerous possibilities.

 Some of the application areas that are distinguished and beautify by LEDs are: FEATURING THE RETAIL MARKET - Retail market that includes shopping malls, jewelry shop, garment store, boutique and other general stores are now becoming point of attraction and interaction with use of LED lights. LEDs can precisely highlight the product and set the aura of the shop to reflect mood. The cool and colorful lighting by LED enhance the shopping experience and makes them feel luxurious with power of light. SETTING MOOD AT WORKPLACE - The right amount of creative and dramatic lighting make mood of the employees to stay at the workplace. Due to its portability and different colors, LED offers flexibility to illuminate any shape and design. 

The controlled intensity and focused direction of LED creates comfort space environment to work. INDUSTRIAL AND WAREHOUSE LIGHTING - Industries and factories are usually of huge size and work 24x7 to manufacture their product. These places require brighter light to work efficiently and in need to reduce energy consumption. Thus, LED is the smart move for them. Switching to LED light has reduced their energy cost without compromising with light quality. OUTDOOR LIGHTING - LED illuminates any outdoor spaces in unparalleled way with its enhancing visible appearance. Roadways and parking structure are now using LED lights to appeal its visibility and security. Cities are upgrading to LED Street light to improve light quality and efficiency. 

 Parks, hotels, airport, and railway station are switching to LEDs for better light performance, security and to reduce maintenance expenses. INDICATORS AND SIGNALING - LEDs are actively used as lighting indicators because of their low energy consumption, low maintenance and small size. Mostly one color LED lights are used in automobile and traffic signal indicators. LEDs also act as luminaries for fiber optic cables that uses its light for signaling in telecommunication and for lighting application. DECORATIVE ART LIGHTING- Use of LED for decorative purpose is a traditional practice. 

People use various LED items to adorn their Christmas trees, frames, showcase and range of LED products to produce festive light. UNDERWATER AND SWIMMING POOL LIGHTING -China 100W led street light Manufacturers With the enhancement in technology, LEDs are now available in waterproof form for underwater application. LEDs are now capable to create a dramatic lighting effect in your aquarium and luxurious swimming pool area along with cutting your energy cost.