loyalfoodmachine

[loyalfoodmachine]

How Do You Replace a Plastic Straw?

According to news from CCTV Finance on July 12. At the same tiem, the National Development and Reform Commission and the Ministry of Ecology and Environment issued the "Opinions on. Further Strengthening the Treatment of Plastic Pollution". And stipulating that by the end of 2020, non-degradable disposable plastic straws will prohibit in the catering industry nationwide. In accordance with relevant laws and regulations. At the same time, after the implementation of the policy ordinance takes effect. At the same time, the production or sales in violation of regulations will revoke if the circumstances are serious. And a fine of 10,000 to 100,000 yuan will impose.

The "Most Prohibited Plastic Order" is about to implement. How will the tea industry. At the same time, it has become a trend to add a variety of small ingredients and desserts to beverages, respond to market changes?

As a matter of fact, many domestic packaging manufacturers have already begun researching plans before the "plastic ban"  issue. The main breakthrough points are the lid and the straw.

1. Injection Duckbill Drinking Cup Lid The lid material is "injected PP", which is suitable for PP cups and injection cups with 89 calibers. There is a raised drainage groove on the lid of the cup. At the same time, so you can drink the drink directly. And then, it is suitable for pure tea, milk lid tea and coffee without any small ingredients.

2.Degradable cup lid for direct drinking and straw The lid is made of food-grade PET material. At the same tiem, it can withstand temperatures between -20℃-60℃. Suitable for 90-caliber paper cups and plastic cups. This lid can directly drink hot and cold beverages without solids. At the same time, such as cola, cold brew coffee, etc. And all kinds of cold drinks containing solids. Such as bubble milk tea, fresh fruit tea, burnt grass, etc.. At the same time, it can use with straws.

3. Eco-friendly paper straws Paper straws were the most used solution before the "plastic ban" issue. According to the relevant person in charge of Chengyu Packaging. At the same time, the current paper straw technology has matured. Compared with earlier similar products. And then, it can already achieve the characteristics of being not easy to soften in liquid and not fading for a long time. In addition, the use of natural wood pulp roll paper has advantages in environmental protection and health issues. From the experience of some consumers. At the same tiem, the paper straw can deform in a short period of time. But over time, the straw soaked in the beverage will become deformed.

4 .Biodegradable straws of pasta drinking straws extruder The straw of pasta drinking straws extruder is fused with new biodegradable raw materials in material. And it is the same as the PP straw and resistant to cold and heat. At the same tiem, the temperature range is -20℃-100℃. In terms of performance and experience. At the same tiem, it is not much different from the straws commonly used in the tea industry. Judging from the current solutions provided by the packaging supply side. At the same time, even if the "plastic ban" is implemented at the end of the year. And then, the impact on the tea industry will not be too great.

When the direction of the new policy affects the entire industry chain. At the same time, the relationship is large. And both technology and resources can replace and upgrade. And the the entire industry is subtly advancing and shuffling. In the face of these changes, the market has already given a number of solutions. It may be easier for a tea brand to complete a "transformation" than to wait and try to change.

[loyalfoodmachine]

Bread crumb microwave drying equipment

What are the advantages of bread crumb microwave drying equipment? 1. Short time and fast speed Conventional hot drying transfers heat. From the surface of it to the inside through heat conduction, convection or radiation. It often takes a long time for the inside of it to reach the required no water and disinfection temperature.

It is compose of polar members and non-polar members. Under the action of field. These polar members change from the original random distribution state. To the direction according to the polarity of it. Under the action of high-frequency electromagnetic field. They are constantly changing according to the frequency of it.

This process causes the movement of thems and mutual friction to generate heat. At this time, the field energy of it is transform into the heat energy in the medium. It for vegetables makes the temperature of it rise continuously. So it is the heating of the medium material itself by consuming the electric field energy. Therefore, it time greatly shorten.

Under a certain power strength, generally only tens of seconds or a few minutes can achieve satisfactory results. It maintains nutrients. It has a rapid heating and non-thermal effect of double disinfection. Compared with conventional thermal drying and disinfection. The required drying and disinfect effects can be obtain at a lower temperature and a shorter time.

Generally, it is 65-70. C, 75-80. C or 103-121. In C, the time is 3-8 minutes.Then it can retain more food nutrients and flavors. Such as color, sweet smell, taste and shape. 3. Energy saving microwave power conversion efficiency is high, generally above 70%. Microwave directly treats food. The heating box itself not heat. So there is no additional heat loss. Therefore, energy saving and electricity saving can generally save 30-50% of electricity.

4. Even and thorough it starts from the surface of it. Then it transfers to the inside of it through heat conduction. There is a temperature difference between the inside and outside of the material. Then the inside and outside are dry and it effect is poor. In order to maintain the flavor and shorten the processing time. It is often not reached. Which affects the drying and sterilization effects.

This phenomenon can be improve by increasing the processing temperature. But this reduces the quality of the surface of it. Such as color, fragrance, taste, and shape.

It has run away. It works at the same time on the surface and inside. Which it can ensure that the internal and external temperatures reach the required value together. So the drying and sterilization are uniform and thorough.

5. Easy to control and easy to realize automatic production. Then, it is simple to action, easy to control. Without hot habitat.  Then, it can be process according to the requirements of them. Reducing production operators and reducing production costs.

6. Simple equipment and advanced technology. Compared with conventional drying. It not require pot, piping systems, coal yards and transportation cars. As long as it has basic water and electricity conditions. No special requirements for it. Also low investment.  The effect is good.

7. Improve working conditions and save floor space. It has no high temperature, no heat, no heat radiation. It can greatly improve it conditions. Then it is compact and it is save. Range of it. It is suitable for it and disinfection of them in t. Such as: bread crumbs, seasoning, chicken powder, oatmeal, extra, egg white ,powder, beef jerky. Dried fish, dried meat.

Shrimp, dried shrimp, seafood, fruits, nuts, fruit slices, beans. Vegetables, Mushrooms, flour, instant noodles, starch. Soy products, brine products, yellow mealworms, silkworm cocoons, feed, granulation, nutrition and health products, etc. Conventional methods (such as hot air, steam, etc.) transfer heat from it of it to the inside. By means of it, conduction or radiation. So it is slow and there is uneven heating between the surface and the inside.

It directly heats both the surface and the inside of it under the action of it electromagnetic field. Through the polar members init. So it is even. It is high. Then, it is fast. Which it is 2 to 4 times more efficient than it heating method.

Generally, it can be completely kille at 75℃~85℃. It only takes 2~3 minutes. Fast speed and short time. Therefore, the nutrients and traditional flavors in the food are keep. It has a significant effect on improving product quality.

[loyalfoodmachine]

How do you get old grease off a deep fryer?

The gas fryer machine has electric heating, coal heating, gas heating and other methods. It is also a smokeless, multi-functional frying equipment. Then the equipment adopts the most advanced oil-water mixed frying process in the world. Also it completely changes the structure of traditional frying equipment and fundamentally solves the shortcomings of traditional fryer. What’s more, it can fry a variety of foods at the same time, without mutual flavour, and one machine with multiple functions.

With the continuous progress of social development, people have more and more needs for commercial deep fryer. However, the fryer will turn black after frying things for a long time. So how should we pay attention to the daily cleaning and maintenance of the fryer? 1. What Is The Application Of The Industrial Deep Fryer Machine?

1. Nuts: such as green beans and peanuts, etc. 2. Puffed foods: like rice cake and potato chips, etc. 3. Noodle products: such as cat ears, twists and so on. 4. Meat products: like meat pieces and chicken legs, etc. 5. Aquatic products: such as yellow croaker and fish, etc. 6. Soy products: such as dried tofu and so on. 2. What Is The Feature Of The Industrial Deep Fryer? 1. The whole oil temperature automatic control, the temperature from 0-300 degrees can be set arbitrarily, suitable for frying a variety of process requirements of food, so that the taste of the food blown more crispy. 2. The use of double-belt conveyor with food, up and down with variable frequency speed.

3. According to the different fried food to adjust the transmission speed of the network, fast heating, high production efficiency. 4. Setting up the automatic filtration system, cleaning the oil sediment anytime, always guarantees oil fresh and clean during frying. 5. Automatic smoke system and constant temperature continuous production system to ensure that workers have a good working environment. 3. How Do You Get Old Grease Off a Gas Deep Fryer? The fryer must be cleaned up after it is shut down. And it important to remove remaining oil stains in the frying tank. so as not to deteriorate and breed bacteria after a long time, which is not good to the hygiene of the food. What kind of cleanup work?

1. Turn off the heating system and make up the oil system.

2. Cool down, recover oil and prepare caustic soda.

3. Collect large pieces of dirt and oil residue in the trash can.

4. Raise the fryer and insert the bumper.

5. Fill the fryer with clean water, add caustic soda and heat to 95°C and cook for 45 minutes. After the cooking is finished, drain the sewage.

6. Use a high-pressure gun to wash the dirt and caustic soda in the fryer, carefully wash the oil pan, filter, and rinse the inner and outer covers until they are clean.

7. First, prepare TP with a concentration of 2-5%. Then raising the fryer and using the fryer to clean the froth from the top to the bottom of the fryer and other parts. Finally, covering the inner and outer surfaces of the equipment. The dwell time of the froth is 10-15 minutes.

8. After cleaning, close the drain valve, stop the mesh belt running, and then turn off the main power supply.

9. After each use, be sure to pull out the plug and start cleaning after the pan is completely cooled. When cleaning, use a soft cloth soaked in neutral detergent and wipe lightly. Also do not use metal brushes or corrosive solvents to avoid damage to the non-stick coating and body surface.

10. Do not wash the entire appliance in water to avoid electric shock hazards and dysfunction. Wipe the attached debris with a wrung wet cloth.

The cleaning steps of an automatic fryer are basically the above three points. Users should pay attention to cleaning, because it is related to the food industry. Regular cleaning can also extend the life of the fully automatic fryer.

[loyalfoodmachine]

Cheese slice microwave drying equipment

It produced by Shandong Senxiang Machinery Equipment Co., Ltd. is use for drying various cheese slices. With low wet content, or after processing, drying materials with wet on the outer surface.

Since they may be pollut by mold during the processing. It drying equipment for it is company by disinfection performance while drying. Which it can effectively kill germ. Then, it cheese slices from being germ, and extend the shelf life.

Features of it cheese slice drying and disinfection equipment： 1. Selective heating. Because they absorb them well. The part with high water content absorbs more microwave power than the part with low water content. This is the features of it.  Which it can be use to achieve even heating and even drying.

2. Save energy consumption. It acts directly on it. So there is no additional heat loss. Then, the air in the oven and it will not generate heat. So it is high. Then, it is also improve. Then, it can save 3% of electricity compared with far line. ten.

3. Short time and high efficiency. It heating is to make it object itself become a heating element. Without the process of heat conduction. Then, it penetrates the inside of it from them. Then, it is heat at the same time inside and outside. So it reaches a symmetrical heating in a short time. Which it greatly shortens the drying time.

4. Easy to control and advanced technology. Compared with the conventional drying method. It is ready to use, no hot inertia, flexible and convenient operation. Then,it is adjustable, and it is adjustable. In microwave heating and drying, no waste water or waste gas is generat.  Which it is a harmless high-tech equipment. It cheese slice drying and it can dry and disin different packaged and unpackaged items. Then, it can be use for: 1. Food products: bread, moon cakes, noodles, tofu, dried tofu, etc. 2. Vegetables: kimchi, bamboo shoots, shiitake mushrooms, etc. 3. Fruits: litchi, longan, etc. 4. Dairy products, seasoning, flavors and spices, instant noodle soups, warm pot seasonings and various liquids can be sterilized.

It is a modern production firm sum up production. Research and development, customization, sales and after-sales service.

The products produced by the company include: air energy drying equipment. Heat pump drying equipment, microwave drying equipment, microwave killing equipmen.

Microwave disinfection and egg killing equipment and other environmental protection equipment. As well as washing machines, hoists, crushers, ovens and other food Industry supporting equipment, welcome to consult and purchase.

[loyalfoodmachine]

Dandelion microwave drying equipment

Dandelion tea uses finely sliced and dried roots or leaves. And then, they are rich in vitamins and minerals. At the same time, it can strengthen the liver. At the same time, it can lower cholesterol. Dandelion microwave drying equipment produced by our company. And then, it has the features of high level of automation. At the same time, it has fast heating rate. At the same time, it has high work efficiency. So, it can quickly dry the dandelion. And then, through the microwave curing process, the color of the dandelion can be more translucent and shiny. Microwave drying equipment. The economic benefits are significant. Because the traditional drying takes a long time. At the same time, the speed is very slow. And then, the energy consumption is large. At the same time, the processing cost is high. And then, using microwave heating can save a lot of energy. At the same time, it can increase the rate of heating and curing. And then, this is because the microwave is penetrative. And then, when heating the object, it does not need any media. At the same time, it can heat both the surface and the inside of the material. And then, according to domestic and foreign data. The rate and efficiency of heating materials with microwave equipment is 4-20 times that of conventional heating ways.

Dandelion microwave drying dryer. It can be designed and customized according to the actual production details. At the same time, it only need one person to operate the equipment. And then, the overall equipment uses assembly line operation. At the same time, it has one end feeding and the other output. So, it can ensure continuous production of materials. At the same time, the microwave dandelion curing equipment’s output is extremely high. And then, one kilowatt of microwave can kill five kilograms of dandelions. So, it is also energy-saving and environmentally friendly. At the same time, there is no waste. This equipment is very suitable for the finishing and drying operations of dandelion, green tea. At the same time scented tea, vegetables and other materials. At the same time, the effective nutrients contained in the microwave-cured materials are basically not lost. And then, the color, fragrance, and taste are better than traditional processing ways. At the same time, the curing effect is significant. At the same time, the products are all top-quality products. Our company has gathered first-class technical personnel and a complete sales team in the industry. At the same time, we have complete processing facilities. At the same time, we have strong technical strength. And then, we have scientific management concepts. At the same time, we have complete testing skills. At the same time, we have excellent quality assurance system. So, we can ensure the user’s product quality and process needs. At the same time, on the basis of cooperating with customers. And then, we can conduct application experiments. And then, we make a thorough and complete design and detailed implementation plan. At the same time, we carefully manufacture first-class equipment after reaching user recognition and resonance.

[loyalfoodmachine]

Microwave curing and drying equipment for barley seedlings

The microwave curing and drying equipment for barley seedlings. It is used to cure agricultural products. Such as mulberry leaves, tea. And then chrysanthemums, honeysuckle, and barley seedlings. And then, it has a significant effect. At the same time, the color, shape and aroma of the products are all good products. And then, it is composed of several independent microwave heating cabinets. At the same time, it has a microwave suppression system. And then a cooling system. At the same time a moisture and heat removal system. At the same time, it is controlled by ordinary buttons. And then, it is flexible in operation. At the same time, there is an observation door on the side of the cabinet. So, it is convenient for observation and washing. At the same time, feeding, finishing, and discharging can complete at the same time.

So, it is energy-saving. At the same time, it is efficient. Microwave curing and drying equipment for barley seedlings   The surface temperature of the material is not high during microwave curing. And then, it does not need to be air-cooled when leaving the leaves. So the chlorophyll changes little. At the same time, the color is fresh. At the same time, the fragrance loss is little. And then, it can evenly dry. At the same time, due to the fast water evaporation rate. And then, porosity is easy to form. So, it has good rehydration. At the same time, it has high quality. But, the traditional cylinder has a high temperature. And then, it is unevenness. So, it is difficult for operators to grasp. At the same time, it is easy to produce burnt leaves and instability.  This equipment uses automatic loading and unloading. And then, the operating staff only needs to press the button. And then, they can monitor the operation of the equipment. At the same time, they can inspect the degree of curing of the fresh leaves. And then, there is only need 1-2 people. But, the traditional curing and drying work is labor intensive. At the same time, the working environment is poor. And then, the whole curing and drying needs 5-6 people. And then, microwave curing and drying has the effect of alcoholization. At the same time, it does not produce high temperature, smoke and noise in the environment. So, it is an ideal pollution-free and environmentally friendly equipment. 

Microwave is an electromagnetic wave. And then, its frequency is of 300 MHz - 300 GHz. And then, the water in the heated medium is a polar molecule. At the same time, under the action of the cation of the rapidly changing high-frequency electromagnetic field. And then, its polarity orientation will change. Because with the change of the external electric field. So, it causes molecular movement and mutual friction. At the same time, the field energy in the microwave field is converted into heat energy in the medium. At the same time, it increases the temperature of the material. So, it promotes a series of physical and chemical processes of heating and curing. At the same time, it can microwave drying and curing. 

Our company will rely on microwave technology. At the same time, we have sophisticated production equipment. At the same time, we have high-precision testing instruments. And then, we have complete quality assurance system. At the same time, we have modern enterprise management system. At the same time, we can design and manufacture according to customer needs. And then, microwave technology builds a domestic microwave technology equipment industry manufacturing. At the same time, it bases with new industries, new formats, new products, new skills, and new models. At the same time, it has a certain position in the microwave equipment industry.

[loyalfoodmachine]

Artificial rice microwave drying equipment

It made of corn, green adzuki beans, red adzuki beans, millet, rice. Then, tartary buckwheat. It made by puffing, crushing, stirring, grow up, granulating. Then, it drying. It has rich nutrition, smooth and elegant shape, and soft taste. It is not easy to age and it is a new healthy food. Then,it needs to be dry and disinfect after granulation.

Because they are relatively large. It is use to dry the artificial rice. Which it has a fast drying rate. But also it quickness kills its accompanying germ, Mold, Escherichia coli, etc. It has two functions. Which it simplifies the processing procedure and improves the enterprise efficiency.

It like other agricultural product drying equipment. It uses microwaves to heat and dry artificial rice. The advantage of it is that it can quickly steam water to achieve product drying. It consists of a control system.

An automatic correction system, an alarm system. A frequency conversion speed regulation system. A monitoring system, and a material control system. It can realize many functions in one machine. It is a many functions device confirm drying, baking, curing, baking, disinfection, and anti -mold. Which it greatly saves investment for them. It is suitable for the rapid drying and disinfection of artificial rice, fruits, vegetables, health products, etc. It can quickness steam it in the material and kill the accompanying germ, mold, E. coli, etc. Then, it quickly achieve the purpose of them.

The drying rate is fast. Which it is several to tens of times the quickness of the traditional process. At the same time, it is high. Then, it is high. Then it is require. It is an advance microwave drying equipment.

It has an part line action, simple action, high output, environmental protection, fast heating rate, even heating, good controllability. Then, it can work keep for 24 hours. Then, it reaches the national standard.

Because it is a special device. They are different, and the equipment parameters and prices are also different. They are for reference only. Welcome to call us or visit the company directly to discuss each other help.

[loyalfoodmachine]

Aerogel microwave drying equipment

Aerogel refers to a nano-porous solid material formed by a sol-gel way. And then, it uses a certain drying way to replace the liquid phase in the gel with gas. At the same time, it has the natural high water content. At the same time, it has low thermal conductivity. So, this determines the use of microwave equipment. At the same time, its high water content determines the rapid feasibility of microwave heating. At the same time, its low thermal conductivity determines the low efficiency of other heating ways. And then, combining these two aspects. And then, aerogel microwave drying equipment has become the first choice for aerogel processing companies. The features of Aerogel microwave drying equipment: 1. It has excellent system. And then, it optimizes the air intake system. At the same time, the way of dehumidification. So, it can remove water vapor in real time. At the same time, it can ensure the drying effect. 2. And then, it uses intelligent control. And then, cloth thickness is adjustable. At the same time, transmission rate is adjustable. At the same time, microwave power is adjustable. And then, material temperature is adjustable automatically.

3. It is energy saving. At the same time, it has high efficiency. And then, it has fast drying rate. At the same time, it is well-proportioned. At the same time, it is energy saving and high efficiency. And then, it is easy to control. At the same time, it is safe and pollution-free. 4. At the same time, Patented escort. And then, it has electronic correction technology. At the same time, conveyor belt uses PTFE. So, it can ensure long-term stable operation of materials. 5. And then, it is reasonable design. Due to the reasonable design of the microwave channel. At the same time, the electric wave resonance is related to the cabinet. So the microwave is greatly stable. At the same time, the change of the load will not affect the stability of the power supply.   The equipment uses the principle of microwave heating. At the same time, it can quickly oscillate and rub water molecules. At the same time, under the action of a rapidly changing high-frequency electromagnetic field. And then the polarity orientation of the water molecules will change. And then with the change of the external electric field. At the same time, high-frequency oscillation friction occurs between polar molecules. So, it can heat by itself. At the same time, it can achieve the purpose of drying.   The Aerogel microwave drying equipment. It can be used to agricultural and sideline products. Such as food, medicine. And then chemical industry, non-ferrous metals and other fields. Foods. Such as soy products, flowers. At the same time edible fungi, grains. And then dried fruits, snack foods. And then additives, puffed products, etc. Medicine. Such as medical center, Chinese herbal medicine. And then pills, powder, etc. Chemicals. Such as inorganic salts. At the same time catalysts, rubber additives, etc. Our company gathers first-class talents in the industry. At the same time, we have the best processing facilities in the industry. And then, we have strong technical strength. At the same time, we have scientific management ways. At the same time, we have perfect testing ways. And then, we have excellent quality assurance system. So, we can ensure user product quality and process needs.

At the same time, our company is committed to improving product quality. At the same time, we actively invest in exploring fields. And then, we develop new products. And then, we are willing to actively cooperate with all parties concerned. At the same time, we work together to help each other promote the application. At the same time, the company is responsible for product installation, commissioning and training. And then, we implement the "three guarantees". At the same time, we have one-year warranty. At the same time, we provide lifetime skills services.

[loyalfoodmachine]

Dry yam microwave drying equipment

It is also call microwave dryer. It is a microwave machine use to dry food. Medicinal materials, wood, building materials, cardboard and other materials. Compared with traditional drying equipment. Then， the features of it Yes: fast drying speed, high efficiency, environmental protection and energy saving. It is a new type of it . That  it responds to low-carbon economy.

It is to use the penetration heating of it to increase the temperature of the material. So that it is vaporiz and evaporate. Then it is discharge by the moisture exhaust system to achieve the purpose of them. The ability of it is mainly determine by its dielectric loss factor. The substance with a large dielectric loss factor has a strong ability to absorb microwaves. On the contrary, a substance with a small dielectric loss factor has a weak ability to them.

Due to the difference in the loss factor of each substance, microwave heating shows the characteristics of selective heating. Different substances have different thermal effects. The water molecule is a polar member with a large dielectric constant and a large dielectric loss factor. Which it has a strong ability to absorb microwaves.

The dielectric constants of them, carbohydrates, etc. They are relatively small, and their ability to it is much smaller than that of it. Therefore, for food. It has a great influence on the microwave heating effect.

It is a new atmospheric puffing technology that uses microwave radiation to heat. So that the wet in the material absorbs them.  Thereby driving the tissue puffing of them. It has a fast heating speed and a short heating time for food.

Compared with extrusion puffing and frying puffing. Then, it is not easy to cause some unnecessary chemical reactions in the food. It does not increase the fat of the food. Then, it retains the product better. The original flavor. So it is widely use in starch foods, protein foods (such as soybeans, etc.). Then , it mixed foods (such as shrimp chips, etc.). microwave drying equipment Using it energy to quickly heat. Make the wet in the material quickly absorb them in a short time. Thereby driving the glutinous rice material structure to expand a new atmospheric puffing technology.

Due to the fast heating speed and short heating time of the food, microwave puffing is not easy to cause some unnecessary chemical reactions of the food, and does not increase the fat of the food, and better retains the original product. Flavor.

Therefore, it is widely use in starch foods (such as corn, artificial rice, glutinous rice), protein foods (such as soybeans, etc.). Then, it mixed foods (such as shrimp chips, etc.).

[loyalfoodmachine]

Edible glue microwave drying equipment

It a microwave machine use to dry food, medicinal materials, wood.  Building materials, cardboard and other materials. Compared with it. It is features by fast drying speed and high efficiency . Environmental protection and energy saving. It is a new type of it to low-carbon economy.

Its working principle is to use the through heating of it to increase the temperature of it. So that it is vaporiz and evaporate. Then it discharg by the wet exhaust system to them of it.

Features of it for eat glue: 1. It speed is fast: heating directly inside and outside the material at the same time. Without heat. In traditional production. It must be a heat process. It not require.

2. Even heating: They complete the drying by it waves generated by it. The surface and the inside of them heated at the same time to it.

3. Reduce component loss: It only needs to stay in it for a short period of it. Then, it does not require air and steam to it. So it can be retain as much as possible.

4. Disinfection: During it process. It may cause secondary pollution to them. It also has the functions of it .

5. Reduce labor intensity and improve work quickness: It can automatically complete bait and bait. The operator only needs to press a button to them and stop level of it. The entire production only needs 1-2 people.

6. Energy saving and environmental protection: It will not produce high temperature, dust and noise. Then, it is an environmental protection equipment with high quickness and energy saving. microwave drying equipment

They can widely use in metallurgy, chemical,food, wood and other fields. Then, it can provide fast, energy-saving.  Also, efficient microwave drying, microwave disinfection. Microwave extraction, microwave heating and microwave sintering processes.

The use of it for them not only greatly shortens the drying time of it. But also it reduces labor capacity and use it. Then , it can be tailor to kinds them according to the actual requirements of them.

The temperature of it is controllable. The cooling effect of it is good. Then, it can run for a long time. Welcome customers to inquire, experiment and talk.

[loyalfoodmachine]

Spices microwave drying equipment

Microwave spice drying equipment is used for spice and seasoning powder products. Such as chili, ginger. And then pepper, garlic slices. At the same time, curry powder, chili powder. At the same time, five-spice pepper, onion. And then horseradish, laurel, cinnamon. And then cloves, incense Pod blue beans. At the same time, nutmeg fennel, caraway. And then licorice, thyme, turmeric. At the same time red pepper, cumin and so on. The spice microwave drying equipment has fast drying speed. At the same time, it is energy saving. At the same time, it has high efficiency and short time. And then, after drying, the product has stable color and fragrance without agglomeration. So, it ensures the quality of the spice. At the same time, it can be connected with the front-end and back-end equipment of the production process. And then, it can form a complete production line. So, it can achieve higher automation in production. Using microwave to dry and sterilize materials such as jelly, paste and sauce has the following advantages. 1. It has high product quality. At the same time, the product has a strong, uniform fragrance and bright color. 2. And then, it has high nutritional content. It is sterilization through special thermal and non-thermal effects. So, it can get the needed sterilization effect at a relatively low temperature and a short time. At the same time, practice has shown that the general sterilization temperature can reach the effect at 75-80 ℃. At the same time, microwave-treated food can keep more nutrients and flavors. Such as color, aroma, taste and shape. And then, it has a puffing effect.

3. It is energy saving. Microwave acts directly on the material. And then, there is no passing through the intermediate heat exchange link. So there is no additional heat loss. At the same time, the heating cavity and the equipment itself will not generate heat. So, the thermal efficiency is extremely high. At the same time, the production environment is significantly improved.

4. At the same time, it is environmental protection. In the process of heating, drying and sterilization. And then, there is no waste water, waste gas, etc. So, it is a harmless high-tech. At the same time, it has low noise during operation. At the same time, it has low temperature to the environment. So, it greatly improves labor conditions. At the same time, it allows employees to have a comfortable production environment. And then, the equipment saves floor space. At the same time, it is easy to move.

5. And then, it is easy to operate. It is ready to use. At the same time, there is no thermal inertia. And then, it is flexible and convenient operation. At the same time, the microwave power is adjustable. At the same time, the transmission speed is steplessly adjustable. 6. It is convenient post-process processing. Because microwave drying has a puffing effect. So it will greatly help the subsequent crushing.

Technical parameters of spice microwave drying equipment:

Spice microwave drying equipment can design and manufacture microwave dryers of different specifications according to the actual situation of users. And then, our company has microwave equipment test prototypes. At the same time, we provide free on-site production operations. And then, we combine with user products to provide one-stop technical services. Welcome new and old friends came to inspect and negotiate.

[loyalfoodmachine]

Tobacco microwave drying equipment

It is different from the traditional coal-burning tobacco leaf dryer. It is mostly dry by burning coal. Then, it not only causes a lot of energy waste.  But also it affects the environment. Industrial Microwave Vacuum Dryer

There is serious pollution. Moreover, it produced by our company adopts new environmentally friendly drying technology, microwave drying technology. In recent years, with the development of it and increasing attention to environmental issues. It is no longer suitable for the development of them.  Then, it will become Leading.  It has gradually become superior tobacco device. They are use and dry in the barn to fully reveal and develop their quality potential to achieve one yellow and two fragrances. If drying  properly, field management, grow up harvesting .It will each account for one-third of it. It is not properly. Then, it will very big. Therefore, it is very important to have a good tobacco drying device.   It for tobacco leaves uses it. The advantages of them are: One: Use electric energy, environmental protection.It uses electricity as the energy source. Which it converts the electricity energy into it energy. It can heat them for heating and drying.

They will not produce any waste gas, waste residue, or waste. Which it greatly improves it of them and increases the warmth of them in production.

Two: fast drying speed, deep drying. Then, it is radiat to the inside of it. The inside and outside of them are dry at the same time. The wet in it will be evenly emit to achieve a fast drying effect. The drying time of it is generally 10 minutes. Which it is relatively traditional.

The speed of it has been increase several times. Three: It is very energy-quickness. It has no heat conduction. During the drying process.  Then, it heats up to achieve the drying effect without causing heat loss. Therefore, the power consumption of it is very low and it is a very energy-saving device .

Four: It has a disinfection function. It is dry by the equipment microwave.Then, it plays a role of disinfection.  Which it can eliminate germ inside and outside it. The dried and disinfected them can quickness extend the shelf life.   Principle of it: 1. The thermal effect of it energy: Under the action of a certain intensity of it.They in food will absorb microwave energy to heat up due to molecular polarization.  Thereby denaturing their protein and losing biological activity. It is mainly use for rapid heating and disinfection.

2. The non-thermal effect of it energy: It also changes the membrane through and polar wet structure.  It causing the egg white and physiologically active substances in the microorganisms to grow up and lose vitality or death. Then, it plays a special role in disinfection that it does not have. It is also one of them of germ death.

3. They are the result of the combined effect of them. Therefore, it is lower than that of conventional methods. In general, it is 120°C-130°C and it is about 1 hour.  While it is only 70°C-105°C and it is 90-180 seconds.

It also call cut tobacco it. It can be use to dry cut tobacco once.  Then dry the cut it twice after it regains wet. While it drying the cut it.  It can disinfect, kill insects and kill them.

[loyalfoodmachine]

Edible fungus microwave drying equipment

With the improvement of people’s living standards. And then, people’s needs for food are also improving. So, for enterprises engaged in food deep processing. And then, only by using new skills and new processes. So, they can improve efficiency. At the same time, they can improve product quality. And then, they can comply with the national policy. And then, the“energy conservation and environmental protection”. At the same time, they can meet the growing needs of the people. And then, nowadays, the use of microwave skills is more and more common. At the same time, many microwave equipment has better promoted the development of society. Edible fungus microwave drying equipment. It is different from the traditional drying way. And then, it is heated as a whole. Because the external heat is easy to dissipate. So, its heat conduction bias and moisture diffusion bias are the same. And then, compared with the traditional drying way. And then, it has the advantages of fast drying speed. At the same time, it is energy saving. At the same time, it has high production efficiency. And then, it is uniform drying. At the same time, it is clean production. At the same time, it is easy automatic control. And then, it can improve product quality. At the same time, edible fungus low temperature drying equipment. At the same time, it mainly uses microwave technology. And then, for low-temperature drying. And then, for insecticidal treatment. So, it can effectively keep the nutritional content of its products.

At the same time, it can also be used as Edible fungus sterilization equipment. At the same time, agricultural and sideline products drying and insecticide equipment.   Microwave dryer is an automatic continuous drying equipment for batch production. And then, it mainly has belt conveyor. At the same time automatic feeder. And then drying host. At the same time hot air stove. At the same time transmission motor. And then control system. And then automatic correction system, etc. At the same time, it has the functions of automatic feeding. At the same time, automatic discharging and automatic control. And then, it has less heat consumption. And then it has high production efficiency. At the same time, it is simple operation. And then, it is convenient maintenance. And then, it has wide application range. At the same time, it has automatic temperature adjustment. At the same time, it has automatic speed adjustment. And then, it can be used for the dehydration and drying of vegetables. At the same time medicinal materials, edible fungi, etc.

Such as green stalks, cabbage. And then carrots, mushrooms. At the same time, flower buds. And then enoki mushrooms, chrysanthemums, etc. And then, it is the most automated equipment in the drying industry. Shandong Loyal Industrial Co., Ltd. has introduced advanced skills at home and abroad. And then, we now are a powerful comprehensive enterprise. At the same time, we link R&D, manufacturing, production and sales. At the same time, the product quality has three guarantees. And then, we can develop and make many food machinery. According to the actual needs of users. At the same time, we inherit the concept of being customer-oriented. At the same time, being an honest enterprise. And then, our equipment is guaranteed within one year. At the same time, we have long-term maintenance. And then, we are a permanent enterprise. At the same time, we have a complete after-sales service. And then, we provide protection for customers’ production convenience.

At the same time, welcome new and old customers from all walks of life to our company for on-site inspections and business negotiations. At the same time, we will be happy for you service!

[loyalfoodmachine]

Resin microwave drying equipment

Chemical products such as resins. They need strict temperature control during the drying process. And then, too low temperature will affect drying efficiency. At the same time, too high temperature will affect drying quality. Microwave resin drying equipment. It is mainly used for the drying of various resins. And then, when drying, the powder is evenly spread on the cloth conveyor belt with a hopper. At the same time, the conveyor belt is sent to the drying box. And then, the drying box uses microwave to heat and dry the resin. At the same time, there is no need to turn the material. So, it is convenient and fast. At the same time, it is time-saving. At the same time, it is a labor-saving drying equipment.

Resin microwave drying equipment. During the drying process. And then, all the water in the resin. That is, the water in the inner layer and the surface layer. And then, microwave can selectively heat it at the same time. At the same time, the water vaporizes instantly after heating. And then, the inner layer and the surface layer air film and air produce a huge pressure difference. So, this forms a huge push force. At the same time, the moisture quickly transfers from the resin to the air. At the same time, the processed resin products by microwave resin powder drying equipment. And then, the adhesion, hardness, impact resistance and flexibility are good.   Microwave drying resin equipment. And then, its heating does not need any heat conduction process. At the same time, it directly transfers energy to molecules or atoms. Through the dielectric loss of the microwave in the resin. And then, this energy transfer way is different from the traditional heat transfer way. So, it is beneficial to improve the chemical diffusion process. At the same time, the chemistry reaction speed. At the same time, it does not produce waste water, waste gas, etc. So, it is a huge improvement to the traditional drying process. At the same time, it can improve the problem of environmental damage. So, it has good social benefits. 

Microwave refers to electromagnetic waves. And then, its frequency between 300 MHz and 300 GHz. And then, substances are composed of polar molecules and non-polar molecules. Under the action of the microwave electromagnetic field. At the same time, the polar molecules in the medium change from their original thermal motion state. And then, it follows the alternation of the microwave electromagnetic field to separate orientation. For example: the microwave frequency is 2450 MHz. And then, there will be 2.45 billion points per second. At the same time, there is a violent friction between the molecules. And then, the microwave energy is instantly converted into heat. So the temperature of the substance rises rapidly. At the same time, it can heat and dry. 

Microwave drying technology has a unique heating and heat transfer mechanism. And then, compared with conventional drying technology. At the same time, it has obvious advantages. And then, it is selective heating. At the same time, it has high dehydration efficiency. At the same time, it has low energy consumption. And then, it can improve resin performance. So, it is efficient. At the same time, it is energy-saving. At the same time, it is a economical new technology in the drying field. And then, it is bound to play an increasingly important role in the production of materials, metallurgy, chemical, food and other industries.

[loyalfoodmachine]

Carbon fiber microwave drying equipment

Carbon fiber needs to be dried and removed static electricity during the processing process. And then, in existing technologies, hot air blowers and static-removing ionizing fans. And then, they are generally installed on the side of the drying box. So, this makes the temperature in the drying box uneven. At the same time, the part of the drying table where the carbon fiber is placed in the drying box. And then, it is in contact with the carbon fiber. And then, since the heat cannot be quickly dissipated. So, there will keep some moisture. At the same time, it will increase the drying time and reduce the efficiency. And then, aiming at the skill problems in existing skills. So, now there have a Carbon fiber microwave drying equipment . The advantages of Carbon fiber microwave drying equipment: 1.There are two types of microwave dryers. The cabinet microwave dryer and tunnel microwave dryer. At the same time, according to the user’s actual production volume and material characteristics. And then, we can recommend suitable microwave dryers. 2.Its heating way is different from traditional heating. At the same time, it does not need heat transfer. And then, it heats the material from the inside to the outside. So, the drying is even and thorough. 3. It heats up quickly. At the same time, the drying rate is fast. And then, the tunnel-type microwave dryer needs only 6-8 minutes. At the same time, the cabinet-type microwave dryer can discharge 1 ton at a time. And then, it only takes 30-60 minutes.

4. At the same time, the whole machine is made of high-quality SUS304 stainless steel. And then, it runs smoothly. At the same time, it has stepless frequency conversion speed regulation. At the same time, it has low noise. And then, it has high strength stainless steel mesh belt. And then, it has small elasticity. At the same time, it is not easy to deform. And then, it is easy to maintain. 5. It has compact structure. And then, it is convenient operation and low failure rate. At the same time, the heating way uses boiler steam or boiler hot water. So, it is safe and environmentally friendly without pollution. At the same time, it is energy saving and high efficiency. Carbon fiber microwave drying equipment Technical Parameters:

Carbon fiber microwave drying equipment. The main performance and technical parameters can be customized according to customer needs. The equipment touch screen display and control, with automatic and manual dual operation functions, adopts infrared, thermocouple thermometer and humidity measuring instrument to measure the internal temperature and humidity of the equipment and realize Full control, dedicated automatic cloth, material collection and dust removal system. Our company has microwave drying equipment test prototypes. At the same time, we provide on-site production operations for free. At the same time, we provide one-stop technical services based on user needs. And then, we adhere to the tenet of “service to the end”. At the same time, we stop at home, look at the world. And then, we always pay attention to suggestions from the market and users, and constantly improves technology, service, and quality.

[loyalfoodmachine]

Corn starch microwave sterilization and insecticide equipment

Shandong Loyal Industrial Co.,Ltd. newly developed a corn starch microwave sterilization and insecticide equipment. It has the advantages of: 1. fast drying rate, 2. and uniformity, 3. and then energy saving and high efficiency, 4. also convenient operation, 5. and then easy control, 6. and then safety and pollution-free. At the same time, the equipment is suitable for drying and killing many kinds of powdery materials. Such as sweet potato starch, corn starch, wheat starch and flour. corn starch microwave sterilization and insecticide equipment Advantages of corn starch microwave sterilization and insecticidal equipment: 1. It saves energy. Common thermal sterilization has heat loss in the environment and equipment. And then, the microwave is to directly process food. So, there is no additional heat loss. At the same time, in comparison, it can save 30-50% of electricity.

2. And then, it sterilizes evenly. Common thermal sterilization starts from the surface of the material. And then, transfers it to the inside through heat conduction. So, there is a temperature difference between the surface and the inside. And then, it can only keep the food flavor. So, the processing time is shortened. So, the inside of the food does not reach enough temperature. And then, this affects the sterilization effect. But microwave has a penetrating effect. So, it can heat the whole food. At the same time, its exterior and interior are both affected at the same time. So it sterilizes well.

3. At the same time, it is easy to control. The device is ready to use. And then, it does not have the thermal inertia of conventional heat sterilization. At the same time, the operation is convenient. And then, the microwave power is continuously adjustable from zero to the rated power. At the same time, the transmission rate can be adjusted continuously from zero. So, it is easy to control.

4. The equipment is simple. At the same time, it has advanced technology. And then, the microwave sterilization equipment does not need a boiler. At the same time, it does not need a huge pipeline system. At the same time, it does not need coal yards and transportation vehicles. And then, it only needs to have basic conditions of water and electricity. Technical parameters of corn starch microwave sterilization and insecticidal equipment:

The microwave sterilization effect is remarkable. And then, the material only needs to be in the microwave field at 85℃ for 3~5 minutes. And then, it can reach the predetermined sterilization effect. So, this far exceeds traditional sterilization methods. At the same time, it is safe and harmless. At the same time, it has no additional investment. And then, the whole microwave sterilizer is made of stainless steel plate. So, it is strong. At the same time, it has strong thermal insulation properties. The equipment uses a tunnel structure. And then, it sets up the PLC system. At the same time, it has hot and cold air system. At the same time, it has infrared thermometers and so on. So, it can implement assembly line work. And then, this greatly enhances the upstream and downstream connection of the production process. At the same time, this improves overall work efficiency. Corn starch sample We sincerely look forward to seeing you and your team visit our factory. At the same time, we would appreciate it if you can bring samples to the experiment. And then, we will accordingly let our skilled staff test the machine for you.

[loyalfoodmachine]

How do you make a biscuit factory?

Biscuits are one of the most popular snacks around the world. And it liked and enjoyed by people of all age groups. The thing that most people enjoy about a biscuit is that it can eat with anything from a cup of tea or coffee to milk.

1. How To Make a Biscuit Factory? Before deciding to build a factory, the one things we need to confirm first is the type of factory and the structure of the plant. The second is the type of food processing. What;s more, the other things is the equipment and cost investment of the factory and the subsequent preparations. For the establishment of a biscuit processing factory, we must first confirm the type of biscuit. Second is the composition of the factory's machinery and equipment. And then we need to know the full automatic biscuit production and processing technology. 2. What Are The Types Of Cookies? The main raw material of biscuits is wheat flour, in addition to sugar, fat, eggs, dairy products and other recipes. According to different recipes and production processes, biscuits can be divided into two categories: hard biscuits and crisp biscuits.

1. Hard biscuits are characterized by molded flowers that are mostly concave. The surface of the hard biscuit has needle-like holes, which are flat and smooth, and the cross-sectional structure is layered. The taste is crispy when chewed. Featured crispy. The ratio of sugar to fat in tough biscuits is lower than the ratio of sugar to fat in crisp biscuits. Usually less than 30% sugar and 20% fat are used. 2. Crisp biscuits are characterized by the shape of embossed flowers, the pattern is obvious, and the structure is delicate, accounting for 14% to 30% of the flour. Some special products have a crisp sweet taste, and the fat content can be as high as 50%.

3. What Is The Process Of The Automatic Biscuit Production Line?

The industrial biscuit processing line which is a whole line of biscuits. It under the action of a series of biscuit machinery. It consists of mixer, biscuit forming machine, the oven, oil spraying machine, cooling line, biscuit finishing machine, biscuit sandwich machine, packing table and so on. Also the biscuit making machine makes it easy and convenient to produce delicious biscuits. Then it achieves the automatic integration of biscuit production. The biscuits production line not only reduces many intermediate links, but reduces a lots manual operation. 4. What Are The Main Steps To Make a Biscuits In The Automatic Biscuit Production Line? Biscuits make in different shapes and forms, but each one needs the right raw materials mixed perfectly to produce the wanted end product. There are also basic four stages of making the biscuit including mixing, forming, baking, and cooling.

1. In the mixing part, flour, fat, sugar, water and other materials mixes together in the right contents in large mixers to form the dough. The mixing time need to achieve even distribution of materials and the right dough consistency. So during this process, the dough temperature and mixing time play an important role. And also the temperature of the finished batter is 26-28℃. The mixing time is 10-15 minutes, which is depending on factors like flour characteristics.

2. In order to avoid the temperature increase during the summer operation, the dough is not too viscous. Therefore, it is generally not necessary to stand and press the surface during the processing process, and it can directly enter the forming process after the powder is adjusted. . Cookie dough can be produced by various molding methods such as roll printing, extrusion molding, extrusion molding, and wire cutting molding, but generally, the method of printing and molding is not used.

3. Choose the appropriate baking temperature according to the product formula, the size and hardness of the biscuit base. Generally speaking. The temperature in the front zone of the oven is 250～280℃. The temperature in the middle zone is 220～240℃. The back zone temperature is 180～200℃. At this baking temperature. The baking time is 5-6min. A high-temperature and short-time baking process can be used.

4. Due to the high sugar and oil content in biscuits, even products with low moisture content are very soft at high temperatures. The surface temperature of the product can reach about 180℃ when it is just out of the furnace, so it is necessary to prevent bending and deformation. Suitable cooling conditions are 30-40°C. The relative humidity is 70% to 80%. In the cooling process, when the room temperature is 25℃ and the relative humidity is 85%, the cooling time from the oven to the moisture reaching the value is about 6min, and the relative stability time of the moisture is 6-10min.