motortoolblog-blog

[motortoolblog-blog]

Overview of Motortool CRDI Injector System

As a corporation that exclusively manufacturers Automotive Tester and equipment as well as embedded system, Motortool was established in 1999. We will continue to enhance the competitiveness of our customers by enhancing the product quality through continuous research and development and years of accumulated human and technological know-how and will make efforts ceaselessly in order to become global with international competitiveness by investing into work innovation and personnel development

MT-3000 I-CRDI

Specification    

·         Product: I-CRDI

·         Model No: MT -3000

·         Control Type:     Air Regulator + Digital

·         Display: 2 x 3 END, 9 LED

·         Input:    AC220 (110V optional)

·         Output:                2Ch, DC 0~200V

·         Proper inlet pressure:    4bar

·         Max. Output pressure:  800bar

·         Temperature:    10 ~ 50°C

·         Fuse:     220V, 10A

·         Weight (kg):       65kg

·         Dimension (mm):550 x 410 x 800

·         Support Injectors: Bosch, Delphi Llians .Denso, Bosch Piezo opflanD

·         Accessories: Bosch, Delphi connector. AC cable, Air hose

Functions

·         Electrical characteristics test for Bosch, Delhi CRDI injector

·         Clearly with suction and LED light

·         Max pressure: 800bar    

·         Embedded variable spray pattern            

·         Automated pattern in it

·         Air suction at the spray nozzle

·         Spray counter    

·         Automatic waste oil discharge after spray test

·         Short circuit protection

·         Diagnose spray pattern performance very

·         Check the status of injectors changing injection time

·         Measure the injected and returned (back-leak) volume

·         Check the injector starting pressure

·         Cleaning injectors with lots of oil flow

MT-4400

Specification

·         Product: I-CRDI "MT-4400"

·         Time: 180 us~2000us

·         Pressure: 0~1800 bar

·         Output: 4channel

·         Injector: Bosch, Delphi, Denso, Siemens, Piezo

·         Cooling: Forced Cooling

·         Power: 380V, 60Hz (Optional: 220V, 60Hz)

·         Motor: 3phase, 2HP

·         Tank: 40L

·         Dimension: 600 x 1320 x 1520 cm

Features

·         Automatic & Manual Control

·         Accuracy of the control expression by computer, Windows operation system

·         Embedded measuring value by the injector model  

·         Variable injector pattern

·         Motor-driven automatic system

·         High pressure pump test

·         IMV test

·         Injector’s minimum alteration pressure control

·         Functions of automatic discharge and automatic receiving of injection volume

Motortool one of the leading embedded system manufacturers in Korea, offer common rail injector tester, leakage current measurement system, multi-tester for automobile, solenoid valve tester to more than 50 agencies.

[motortoolblog-blog]

Overview of Motortool Common Rail Tester and its Equipment

CRDI TEST BENCH MT-5200 Cylinder type

High pressure pump, Injector, Cylinder Tester

Specification

·         Product name - M1.5200

·         Injection time - 100us •1600us

·         Injector - Bosch (RI solenoid, Bosch (RI piezo, Bosch CRIN, Siemens (Continental) plezo, Delphi solenoid, Dense solenoid, Dense plezo (Support all CRDI system)

·         Pump - Boseh CP1, CP2,CP3, CP4, Delphi etuo3, ewo4, euro5, Denso HP3

·         Output- 4 Channels

·         Cooling - Forced cooling

·         Pressure - 0-2000bar (Max 2800 bar when changing setup)

·         Power - 380V i 60Hz (Option: 220V/60Hz)

·         Motor - 3 phase, 3HP, 6 poles (Option: 5HP, 6 poles)

·         Oil tank – 40L

·         Size - 1375x730x1700 (mm)

Various Injector Test

·         Supply of dedicated connectors and high pressure pump for each injector

·         Manual control of the injection

·         High precision measurement that doesn't change even when measured 10 times

·         Separated control system for each 3rd, td, 5th, 6th generation for Bosch, Delphi, Siemens, Dense

·         Accurate display of the knocking injection volume for Siemens (continental), Delphi and Dense - Use of rebuilding injection function and return connector nipples for Piezo

·         Support printing function

·         Air vents function for the setting of Piezo

·         Free voltage and current control

·         Possible to generate any voltage and current for all injectors around the world

·         Automatic detection of Piezo injectors

·         Micro resistance and HG check of coils

·         Zooming on injector waveforms

·         Shows real-time voltage waveform for Pine

·         Shows real-time current waveform for solenoid

·    ��    Possible to input of injectors data

·         Possible to create standard data for Injectors

High pressure pump & IMV

·         Display graphs of IMV NG, pressure, duty variations

·         Display graph of target pressure, current pressure

·         Able to select control type for different types of pumps: Bosch, Delphi, Denso, Siemens (continental)

·         Able to select rotation direction for each pump

·         Free control of the pump's pressure

·         Free control of the rail's duty

·         Automatic IMV measurement function

·         Use of flexible high pressure pump connector hose

·         Supply of dedicated connectors

·         Supply of connection adaptors for various types of pumps

·         Easy install and uninstall of pump

·         Coupling that doesn't damage the body of the pump: Jaw coupling that compensates the link tolerance

·         Installation of suction pressure gauge

·         Easy installation by the Implementation of a unified pressure

·         Negative pressure pump hose

·         Able to set the distance of the pump holder

·         Control the fuel pressure using just the IMV

Motortool - Best Motor tool and Common Rail Tester Manufacturer Korea. We are manufacturing common rail injector tester, multi-tester for automobile and solenoid valve tester and supplying them to more than 50 agencies. Buy Motor Tool Equipment in Korea!

[motortoolblog-blog]

Overview of Motor Tool Equipment MT 5600 Load cell

MT-5600 Load cell sensor

High pressure pump, Injector, IMV automatic test, Magnetic coil test, Piezo element test, Delphi defective test.

System

·         Real-time automatic upgrade through Internet (HQ's servers)

·         Automatic data update of injectors

·         Quiet operation by the use of motor control technology

·         Use of low current motor with high number of poles

·         Possible to adjust a variety of rail frequency

·         Support Common rails from all around the world

·         Use of Cowheels for an easy mobility

·         Able to control operation settings through preferences

·         LED for an easy work

·         Internal fuel cooling device

·         Selection of a purification structure for reduced contaminants in the tank

·         Show temperature of the fuel tank and rail

·         Convenient automatic cylinder

·         Use of precise cylinder for Lab use

·         Use of touch screen

Various Injector Test

·         Supply of dedicated connectors for each injector

·         Supply of dedicated high pressure pipes for each injector

·         Manual control of the injection

·         Precision measurement through the load cell sensor

·         High precision measurement that doesn't change even when measured 10 times

·         Separated control system for each 3rd, ltd., Sib, 6th generator for Bosch, Delphi, Siemens, Demo

·         Accurate display of the knocking injection volume for Siemens (continental)

·         Accurate display of the knocking injection volume for Delphi

·         Accurate display of the knocking injection volume for Denso

·         Use of rebuilding injection function and return connector nipples for Piezo

·         Support printing function

·         Air vents function for the setting of Piezo

·         Free voltage and current control

·         Possible to generate any voltage and current for all injectors around the world

·         Automatic detection of Piezo injectors

·         Micro resistance and NG check of coils

·         Automatic measurement of the resistance of the injector

·         Zooming on injector waveforms

·         Show real-time voltage waveform for Piezo

·         Show real-time current waveform for solenoid

·         Possible to input of injector's data

·         Possible to create standard data for injectors

·         Integrated standard data for injectors

·         Automatic diagnosis for NG injection per an injector

·         Automatic registering function of 4 measuring volume

High pressure pump & IMV (Applied of flow sensors)

·         Display graphs of IMV NG, pressure, duty variations

·         Display graph of target pressure, current pressure

·         Able to select control type for different types of pumps: Bosch, Delphi, Denso, Siemens (continental)

·         Able to select rotation direction for each pump

·         Free control of the pump's pressure

·         Free control of the rail's duty - Automatic NV measurement function

·         Use of flexible high pressure pump connector hose

·         Supply of dedicated connectors

·         Supply of connection adaptors for various types of pumps: Bosch CP1, CP2, CP3, CP4, Delphi euro3, euro4, euro5, Denso HP3

·         Easy install and uninstall of pump

·         Coupling that doesn't damage the body of the pump Jaw coupling that compensates the link tolerance

·         Installation of suction pressure gauge

·         Easy installation by the implementation of a unified pressure

·         Negative pressure pump hose

·         Able to set the distance of the pump holder

·         Control the fuel pressure using just the IMV

Are you looking for Common Rail Tester Manufacturer Korea? Motortool, we are the leading manufacturer of common rail injector tester, multi-tester for automobile and solenoid valve tester, leakage tester and supplying those to more than 50 agencies. Buy Motor Tool Equipment in Korea and worldwide.

[motortoolblog-blog]

Get an outlook of Motortool manufacturer in Korea

As a corporation that exclusively manufacturers Automotive Tester and equipment as well as embedded system, Motortool was established in 1999. We will continue to enhance the competitiveness of our customers by enhancing the product quality through continuous research and development and years of accumulated human and technological know-how and will make efforts ceaselessly in order to become global with international competitiveness by investing into work innovation and personnel development

Products

MT-3000

Specification    

·         Product: I-CRDI

·         Model No: MT -3000

·         Control Type:     Air Regulator + Digital

·         Display: 2 x 3 END, 9 LED

·         Input:    AC220 (110V optional)

·         Output:                2Ch, DC 0~200V

·         Proper inlet pressure:    4bar

·         Max. Output pressure:  800bar

·         Temperature:    10 ~ 50°C

·         Fuse:     220V, 10A

·         Weight (kg):       65kg

·         Dimension (mm):550 x 410 x 800

·         Support Injectors: Bosch, Delphi Llians .Denso, Bosch Piezo opflanD

·         Accessories: Bosch, Delphi connector. AC cable, Air hose

Functions

·         Electrical characteristics test for Bosch, Delhi CRDI injector

·         Clearly with suction and LED light

·         Max pressure: 800bar    

·         Embedded variable spray pattern            

·         Automated pattern in it

·         Air suction at the spray nozzle

·         Spray counter    

·         Automatic waste oil discharge after spray test

·         Short circuit protection

·         Diagnose spray pattern performance very

·         Check the status of injectors changing injection time

·         Measure the injected and returned (back-leak) volume

·         Check the injector starting pressure

·         Cleaning injectors with lots of oil flow

MT-4400

Specification

·         Product: I-CRDI "MT-4400"

·         Time: 180 us~2000us

·         Pressure: 0~1800 bar

·         Output: 4channel

·         Injector: Bosch, Delphi, Denso, Siemens, Piezo

·         Cooling: Forced Cooling

·         Power: 380V, 60Hz (Optional: 220V, 60Hz)

·         Motor: 3phase, 2HP

·         Tank: 40L

·         Dimension: 600 x 1320 x 1520 cm

Features

·         Automatic & Manual Control

·         Accuracy of the control expression by computer, Windows operation system

·         Embeded measuring value by the injector model  

·         Variable injector pattern

·         Motor-driven automatic system

·         High pressure pump test

·         IMV test

·         Injector’s minimum alteration pressure control

·         Functions of automatic discharge and automatic receiving of injection volume

We are leading Motortool manufacturer in Korea and Common Rail Diesel System Supplier in Korea. We offer common rail injector tester, multi-tester for automobile, solenoid valve tester to more than 50 agencies.