mountaintopsedc-blog

[mountaintopsedc-blog]

10% off the listed prices !! Use code : BEADDAY All custom made by hand, only one of each. Direct link below! Custom made beads, one of each. •Timascus /TI Flamed timascus head with anodized body. 85.00 •Ghost timascus and titanium Ghost style anodized timascus and anodized body. 88.00 •Fordite / Titanium Rare Ford Fordite inlay with a titanium body anodized and brushed finish on the ti with matte finished machined regions. 75.00 •X machined Full TITANIUM anodized and machined finish body. 65.00 •Fordite / Titanium Rare Ford Fordite inlay with a titanium body and brushed finish on the ti with matte finished machined regions. non colored. 75.00 •Stainless Damascus / Titanium Stainless Nichols Damascus etched and inlaid into titanium. Anodized body 75.00 http://www.mountaintopsedc.com/product/titanium-timascus-dama-beads WWW.MTNEDC.COM #titanium #damascus #Dama #bead #customknife #pocketknife #flashlight #edc #everydaycarry https://www.instagram.com/p/Bn1LjrvhtG6/?utm_source=ig_tumblr_share&igshid=1fxp4mz88nzd1

[mountaintopsedc-blog]

Xl stem TI / copper •.650 hollow titanium stem •1.125 copper body •Blacked out copper with brushed highlights •.500” ceramic bearing •Matte finished and anodized on machined regions •4:00 spin time , very light wobble starts at 1:45 and progresses throughout the spin. #tops #edc #pockettoptalk #damascus #titanium #everydaycarry #superconductor #timascus #damasteel (at Newmarket, New Hampshire) https://www.instagram.com/p/Bnw03q9hMtQ/?utm_source=ig_tumblr_share&igshid=xpcn1csgro17

[mountaintopsedc-blog]

3 peice CU/AL/AL 1.125 Copper •Machined hollow body •Machined bell •Blacked out copper with brushed highlights •.125 tungsten bearing •Matte finish on body •10:10 spin time , Light movement starting at 5:30 and almost completely disappearing around the last min or so . #Spinningtops #edc #pockettoptalk #damascus https://www.instagram.com/p/Bnw0sQHhd82/?utm_source=ig_tumblr_share&igshid=pnwn55p5mkxl

[mountaintopsedc-blog]

Skull 💀 Damascus 1.125” skull Damascus donut •Mirror polished •Anodized body •Anodized stem •.125 tungsten bearing •Milled stem 9:05 spin , dead still throughout Available! 308.00 shipped with the stand #Damascus #Spinningtops #fidget #Spinning #edc #pockettoptalk #pockettop https://www.instagram.com/p/Bnw0TMyhq3A/?utm_source=ig_tumblr_share&igshid=i7xykvm4fw06

[mountaintopsedc-blog]

Super machined titanium over copper! #titanium #copper #Spinningtops #Spinning #fidget https://www.instagram.com/p/Bnt3PFLhQul/?utm_source=ig_tumblr_share&igshid=t2uo04jsfvvk

[mountaintopsedc-blog]

First "in" gets it! damasteel heimskringla .875" body Titanium stem Milled stem Anodized Diamond machined stem grip .125 tungsten bearing Etched and polished body Dead still spinner 5:00 spin time 275.00 / 310.00 with matching stand +8 for conus shipping / 16 international #tops #edc #pockettoptalk #damascus #titanium #everydaycarry #superconductor #timascus #damasteel https://www.instagram.com/p/BneZRhmhfo9/?utm_source=ig_tumblr_share&igshid=1twchvus4121v

[mountaintopsedc-blog]

For sale! First "in" gets it I'll end the sus this afternoon. Damascus and Titanium Donut 1.00" donut style Damascus bell Colored Titanium stem Mirror polished body Milled and anodized stem .125 tungsten bearing 9:30 spin dead still throughout 250.00 w/o the stand 285.00 with +8 shipping conus /16 international #tops #edc #pockettoptalk #damascus #titanium #everydaycarry #superconductor #timascus https://www.instagram.com/p/BneY_dAgZF4/?utm_source=ig_tumblr_share&igshid=ltgmemaonqri

[mountaintopsedc-blog]

First "in" gets it! 4 peice Fordite 1.00" Fordite body Titanium stem Copper core with a superconductor inlay Milled & colored stem .125 tungsten bearing Polished body 3:30 spin time dead still until the last 10 seconds 265.00 +8 shipping conus / 16 international +40.00 for the matching 2 peice stand. #Tops #fidget #Spinning #Spinningtops #edc #fordite #superconductor #copper https://www.instagram.com/p/BneKbN5Bt0Q/?utm_source=ig_tumblr_share&igshid=vb13hbc1qwci

[mountaintopsedc-blog]

Labor day sale! 160.00 shipped 50% off!! Custom stick spinner Titanium Bronze and Fordite Diamond oval machined handle R188 one drop bearing Fordite capped compartment Quartz finished bronze cap #stickspinner #edc #fidget https://www.instagram.com/p/BnRICRBBi-A/?utm_source=ig_tumblr_share&igshid=gtqac8th1ccp

[mountaintopsedc-blog]

I'm going to runs bunch of 50% off labor day sales today here on the page and ig!! If your looking for tops or coins keep your eyes out!! First one up! First "in" gets it!! This is a 4 peice 1.125" body Dupont corian polished Copper base -Mirror polished Texture tech titanium inlay on bottom Frag style machined handle 4:00 light hula motion starting in last min 108.00 shipped!!! #labordaysale #handmade #Tops #edc #copper #Spinning https://www.instagram.com/p/BnRG8y_ht36/?utm_source=ig_tumblr_share&igshid=1had4f99o3c1x

[mountaintopsedc-blog]

Super Bullet beads! Prices on the last picture, DM or comment to buy! Only one of each! #handmade #edc #titanium #timascus #everydaycarry #knife #custom #bead #fordite #damascus (at Newmarket, New Hampshire) https://www.instagram.com/p/BnOskODBKzb/?utm_source=ig_tumblr_share&igshid=169k98pjz7lut

[mountaintopsedc-blog]

Fidget stick spinner with deep hidden compartment on one side with a fordite inlay . Quartz finished bronze machined inlay . Great spinner. On sale 325.00 ! #fidgetspinner #fidgetspinner #titanium #fordite #edc #spinner #handmade

[mountaintopsedc-blog]

Blue to purple fade headed out of the shop! Tibolt powder coated black then machined with a dimple fade out and a frag grip. #titanium #tibolt #edc #pen #custompen #everydaycarry #tibolt #fellhoelter

[mountaintopsedc-blog]

Recent pen customized for my buddy @chans_edc ・・・ 😳 #anodizedtitanium #tisurvivalanodizingservices #mountaintopsedc #fellhoeltertibolt #fellhoelter #tibolt #ztknives #zt0920 #kochtools #kochtoolskaplifter #kochtoolsbead #liontribearmory #edchank #edc #everydaycarry #dailycarry #edcpocketdump #pocketdump #edcdump #geardump #edcpics #knifeporn #knifepics #knivesofig #knivesofinstagram #titanium #ilovetitanium

[mountaintopsedc-blog]

View this post on Instagram

A post shared by Sanco Design (@sancodesignedc)

Custom machined beads from this week!! #fidgetspinner #edc #bead #beads #everydaycarry #handmade

[mountaintopsedc-blog]

View this post on Instagram

A post shared by Sanco Design (@sancodesignedc)

@chans_edc new pen I just sent back!! Thanks!! #Repost @chans_edc ・・・ Had to put the gloves on for today’s #edcmailcall Thanks to @mountain_tops_edc for the beautiful work on my #fellhoeltertibolt I think I need another one to put my mokuti parts on now, this is just simply amazing! Also (swipe) my biggest piece of #blacktimascus to date and a great deal from @qerim37 👌 #mountaintopsedc #qerim37 #timascusprybar #fellhoelter #tibolt

[mountaintopsedc-blog]

Zirc and Timascus Spinning top 1.125" diameter Zirc stem -Mirror polished -Colored black Timascus body -Mirror polished -Anodized .125 tungsten carbide bearing 325.00 shipped within USA Perfect spinner dead still 5:00 spin time. #edc #pockettop #pockettoptalk #Spinningtops #Spinning #fidgetspinner