ok4uandus-blog

[ok4uandus-blog]

Garage Door Brackets: To Replace or Repair

There are at least 7 different brackets that work to hold your garage door and opening components in place. General maintenance involves checking the screws for tightness, although you should always avoid over-tightening. Other repairs may require the help of a professional.

You might not realize how heavy the door is, because you can raise it manually with relative ease. This is something of an illusion. The doors are actually very heavy. It is the torsion springs at the top of each door that allows it to be raised without a lot of exertion in effective doremi door orange country.

As you are leaving or coming home for the day, take the time to watch the panels rise. Are they moving smoothly and quietly or is there are lot of shaking and noise?

Noisiness or shaking could indicate that a bracket is cracked or loose. If the issue is not addressed in a timely manner, the results could be bad. A section could fall on your vehicle. The weight of the door could cause other components to break or pull loose. If you don't spend a little time and money now to check for the cause of your problem, you could spend a lot of money in the future, repairing the damage.

Although the styles and designs vary from one manufacturer to the next, there are some similarities. You should notice a 5 inch bearing bracket in the center of the door. This one is under a great deal of tension. You should not try to replace it on your own. You can tighten it, if it seems loose. But, if it is cracked or does not tighten as it should, you should call a repairman and have it replaced.

On the top inside corners of each side is another pair of brackets. These work loose relatively easily and are usually simple to tighten. You can replace a cracked one as long as you have good tools.

Another pair is located at the bottom. A single one is referred to as a "lift bottom bracket". They are more complex than some of the others. They include a Milford pin and a cable holding stud.

With low headroom doors, there are additional brackets and carriers. Most are long-lasting as they are made of metal with a galvanized steel finish, but they can become damaged, just like any other piece of hardware.

I recently read an article where a homeowner was advised by an employee in a home improvement store to turn a cracked bracket upside down and drill a new screw hole. That is not something I would ever recommend. If your repair fails suddenly, you will end up spending a lot more in the long run. So, replacing is always better than repairing.

Home improvement stores sometimes sell single garage door brackets. If you need to replace one, you may as well replace the other. It has received just as much wear and tear as the other. It might look alright for now, but it won't last for long.

Article Source: http://EzineArticles.com/5667282

[ok4uandus-blog]

Garage Door Opener Ideas For Style and Function

Are you looking for a great home idea? Perhaps you have gone through great lengths renovating the living room, the kitchen, and even the shower room, but how about your garage? Although you do not frequent that place, it houses your prized vehicle. So give it a major boost with a good garage door opener.professional.

It is true that this device may be mostly invisible because it is usually installed on the ceiling, but it can do things that will make your house look dashing. With a mechanism that automatically operates your door to pull up and pull down, it can give your house a certain appeal.

But this is not just about look and design. A good quality garage door opener also provides convenience and ease of use. Most openers nowadays are electronically powered and can be operated without having to exert a muscle.

Some of these can be operated via a control panel usually mounted on the wall. It is usually placed six feet from the ground to avoid small children from reaching it. Most people however prefer a garage door opener installed with remote control sensors. This allows it to be operated even from inside the car.

But how exactly does a door opener work? Well, there are different designs available in the market. And although their functions are relatively the same, they have a different mechanism and they work differently.

First, there are the electric powered and the non-electric powered ones. But in either case, torsion springs or extension springs are commonly used. For the torsion spring types, the lifting force comes from the torque produced by rotating the spring. And as for the extension spring types, the strings are extended to pull the doors up and down. Other designs use trolleys and steel tracks. In this case, an electric motor pulls the trolleys along the steel tracks which cause the doors to open and close.

As for the doors itself, there are also several design types out there. The classic and most common design is the window-type which opens by moving upward in an angle. The other type which is gaining a lot of popularity lately is the sectional garage door. This has a mechanism similar to a roll up door which allows it to be pulled up vertically. This makes it a safer choice over the window-type especially on windy places.

But if you really want to make a statement, then you should focus on the materials used. Wooden garage doors may be more expensive but they certainly look better and they have that attractive classical feel. They also make a better statement when used with a good varnish.

Also, wooden garage doors are not only beautiful, but they also have several advantages over the other materials used for making doors. Like for example, it will not rust like metal. Metals also absorb a lot of heat from sunlight making the inside of your garage unbearably hot. Wood on the other hand promotes a cooler environment because it does not absorb or release as much heat.

However you look at it, getting a wooden garage door is a great home idea that is not only functional, but also very trendy. Never mind the additional cost. The better durability of wood makes it a wise investment choice in the long run.

Article Source: http://EzineArticles.com/4429002

[ok4uandus-blog]

All About Roll up Garage Doors

Technological innovations have made it easy to operate rollup garage doors. This door style is available in different modes of operation, including remote control, motorized and automatic in garagedoorMarinaDelReycal.com.

The push-button technology will also help enhance your home security. For example, you can open your remote-controlled rollup garage door without the need to get out of your vehicle, thus eliminating the risk that an intruder will attack you while you are still outside of your home.

A manual rollup garage door is also available. Improvement in hardware has made operating the rollup door easy and smooth. Many online retailers (arm-r-lite.com, wayne-dalton.com) are offering rollup garage doors in various styles, designs and sizes. Prices vary depending on the features of the door.

Carriage House Overhead Rollup Door:

This carriage house garage door from Arm-R-Lite is designed for homeowners who like the look of a traditional carriage house door but want the contemporary elegance and convenience of a sectional door. Material choices are steel, wood, aluminum and vinyl. Aside from its residential application, the door is also ideal for use in restaurants and fire stations.

ARM-R-LON Fiberglass Rollup Door from Arm-R-Lite Door Manufacturing Co.:

This door is ideal for use in any residential and commercial applications because it has superior strength, lightweight, translucent and requires no maintenance and repair. Available sizes are 24 feet by 2 inches wide and 18 feet high. The door thickness is 1 and ¾ inches, bottom rail is 4 and ½ inches, meeting rails is 3 and 38 inches, end stiles 3 and 3/8 inches and center stiles 3 and ½ inches. Top rail dimensions range from 2 and ¾ inches to 16 feet and 2 inches wide, 4 and 12 inches over 16 feet and 2 inches.

DS 350 Commercial Roll Up Steel Door from Wayne Dalton:

This door provides windload protection of up to 150 miles per hour. Available sizes are up to 16 feet by 16 feet. This curtain rollup steel door is constructed from galvanized steel, deeply corrugated. The door is primed and painted finish with silicone polyester for beauty and durability. Color options are white, royal blue, mist white, continental brown, yellow, desert tan, cedar red, polar blue, sunset orange, hunter green, fern green, bronze, Valentine red, sea green and patriot red.

Steel Rollup Garage Door from Bluescope Steel:

The door is constructed from Colorbond and Zincalume steel. The door is easy to maintain, corrosion resistant, weather tight and designed against cracking, peeling or chipping. Yiu can choose from a wide array of colors.

944 Door Trac-Rite Door:

This door is ideal for self-storage, light-duty commercial and residential applications. Available custom sizes are 3 feet wide by 3 feet high to 11 feet wide by 10 feet and 4 inches high. Some features are live axle, helical torsion, zinc-coated steel, powder coated handle, stainless steel bottom assembly, cast zinc alloy and latch slide with magnetic properties.

Commercial Roller Door from Shanghai TOMA Building Material Co. Ltd.:

This door is available in manual and motorized models. The manual version is spring loaded which makes the door easy to lift and the bottom rail has a security center lock. The motorized version has a key switch and comes in different styles and designs that will fit with any contemporary home decor. Standard features are galvanized steel slat, aluminum slat, polyurethane slat and extruded aluminum slat.

Article Source: http://EzineArticles.com/3970417

[ok4uandus-blog]

Garage Door Repair - Entrust It to an Expert

Having a garage door in the garage is really worthwhile, especially if the door is controlled remotely by the car. This is not only for ease parking but for safety and security as well. You can easily drive inside the garage while the door opens and safely closes right after your car passed through it.

Garage doors may appear to be one simple device but there are a lot of minor details in it that make it one unique necessity for your garage. So when you handle door repairs, you can do it by yourself if you have the ability to do it or you could just hire someone from a repair company who is expert and knowledgeable with the different types, details, and function of the door.

Before you decide who will do the repair, analyze the problems first. There are times the problem is just simple and may need minor repair which you can do alone. Some common problems of the garage door are only related to it's automatic opening features http://GARAGEDOORREPAIRHAYWARDCAL.COM

Automatic functions of the door work through the use of a sensor as remotely controlled from the car. The problem usually occurs if there is something blocking the eye of the sensor, probably a pool of dusts or dirt. It could also be because of some wire disconnection causing the sensor to malfunction. The door may also malfunction due to mechanical problems which include spring tension, track alignment, and many more.

The initial step is to check all the above-mentioned causes of problems. If the problems are minors, you might be able to repair it by yourself. But because the garage door is made up of complex designs and functions, you might need the help of repair experts.

There are a lot of companies and firms that offer services for garage door repairs. If you aim to have the best service for an effective and efficient long lasting garage door facility, you should hire the best technician so you will not worry about recurrence of problems. When looking for a technician or repair man to fix your door, always consider the expertise of the technician. He should have been doing the repairs for quite some time now making him familiar with different problems and appropriate solutions.

Most of the dealers of garage door repairs specialize in repairing any types of door problems, from manual to automatic types of doors. It takes a skilled and experienced technician to be able to analyze properly and fix efficiently the exact problem of any door.

Entrusting the repair of your garage door to a repair specialist is important as it will ensure that your door will work properly again and that recurrence of problems would be prevented. This will also make you comfortable knowing that your garage door is working at its best to secure your house and your cars.

Article Source: http://EzineArticles.com/2809736

[ok4uandus-blog]

The Types of Garage Door Panels That Will Work for You

The garage door system is an essential part of the garage and the entire house to which the garage has been attached. It completes the overall appearance of the house's facade. Hence, the garage door panels should not be regarded as just an addition. It should be looked upon as one of the main attractions of the house.

If you are planning to build your garage, there are some factors to be considered before purchasing a door. Like any other buy, you have to conduct serious planning before anything else. First, remember the function that it has to perform. So it is intended for the garage. Does it have to look a particular way? How do you plan it to match up with the exterior of the entire house? What kind of garage door panels are you planning to use?

In general, there are four types of garage door panels that are available for sale in the market: wood, aluminum, steel, and steel with overlay. These four types also come with different designs.

Wood is the most traditional material used in making the door. Despite that, it has never been out of style and it has never left the limelight. It is still one of the common materials that people adhere to when building a garage door. However, being a natural product, it requires some degree of maintenance to be able to prolong its life. And this makes a wooden door unsuitable for those homes which are located in the coastal areas. Remember that wood cannot stand being exposed to the salty moisture coming from the sea.

The aluminum-made garage door panels are the more appropriate for those houses located near the seas. This type is of material is light and rustproof. Its durability is also suitable for all weather conditions.

The more sturdy type of material for a paneled door is the stamped steel. This is tougher than the wood and aluminum, and it possesses a non-corrosive property that resist rusts and other substances that may cause decay.

The last type of door is the steel with overlays. This type is commonly made with four layers of steel. First, it is composed of two layers of steel. Then these are topped with some layer of insulation compounds. And finally, a composite overlay will be capping the layers.

Article Source: http://EzineArticles.com/5938849

[ok4uandus-blog]

Garage Door Opener Installation In Few Easy Steps

The process of garage door opener installation is usually straightforward, though manufacturers and parts may vary. Since these openers are generally installed by the consumer, installation instructions are clear. Parts are labeled to ensure easy assembly.

This process should only take a minimal amount of time and your opener will be fully operational.

Assemble the Opener

Lay out all parts as the instructions indicate. Parts are usually stamped or may contain lettered stickers. The first step is to assemble the rail. Next you will attach it to the opener's motor head. Once the opener has been completely assembled, the final step is installation.

Attach the Rail to the Header

To perform this step, you will need an 8-foot ladder. Raise your garage and mark it at the highest point. Close the garage door.

At the site of the mark, measure up two inches. The bottom of the header bracket will be placed here, over the center of the door. Place the header bracket on at the second mark and secure it with two wooden lag bolts.

With the motor end on the floor and the rail inside the header bracket, line up the opener assembly on the door. You will need to line up the holes on the rail with the header bracket. Slide a clevis pin through the bracket and rail to attach.

Mount the Motor

Place the ladder at the back of the door tracks, in the center. Place the motor on the ladder. Slowly, raise the garage door until it comes in contact with the door. As you continue to open the door, the motor assembly will be lifted off the motor. When the door is fully open, place a 2x4 between the opener rail and the door.

To do your garage door opener installation proper, you will need to fasten the hangers to the motor head into the ceiling stuffs. Using the instructions and hangers provided, attach them to the ceiling with lag bolts. After attaching the hangers, lift the motor head and bolt it to the ceiling hangers.

Article Source: http://EzineArticles.com/5190548

[ok4uandus-blog]

Read This Before Trying to Install a Garage Door Opener

Installing a garage door opener can be a big job for a homeowner. There are plenty of tutorials about just that sort of thing, but one has to keep a few things in mind.

The most important criteria is the skill level of the installer. A homeowner might not balk at replacing a door knob, but if on the other hand a repair person is called into replace a leaking faucet, perhaps a professional should be called. This is not to be taken as a sign of weakness, but merely a precaution. Garage doors that come loose and lower themselves due to faulty installation can cause serious damage to a person, car or other object nearby.

Once one is sure his or her skills are up to the task and an opener must be chosen. Follow the scout motto and be prepared make sure all the tools are available and organize the supplies. Go over the entire set of instructions. Remember safety is more important that pride. Reading over the instructions will gives one a chance to make sure all the bolts and screwdrivers are in place. Discovering a missing bolt half way through a project when the door is down and the car is trapped in is not very smart. Not having all the necessary tools might be an indication that a professional should be called.

This is also the time to make sure one can reach the ceiling to perform the installation. Is the ladder tall enough? Will an extra set of hands be needed for a crucial hold and tighten moment. Recruiting that person and having them wait may seem like a waste of their time. Instead ask them to help by handing out tools and supplies as needed. Getting help through the whole process is better than ones arms getting weak from exhaustion while shouting across the home.

Ensure that the door is lifting properly. The garage door opener is not actually lifting the full weight of the door. There are springs and pulleys doing the actual labor, a manually opening door and the new opener are actually breaking the force of inertia that hold the door up or down. If the door can't be lifted manually, then a repairman needs to be called to fix the door first.

These a helpful hints should make installing a garage door opener a little easier and safer. Remember to side act with caution and be thorough and follow the manufacturer's instructions to ensure that an afternoon of effort is rewarded with years of use, and when in doubt, call in a garage door service to get the job done right the first time.

Article Source: http://EzineArticles.com/4478141