olliejoelinney

[olliejoelinney]

https://www.youtube.com/watch?v=CtVRjB0MrNg

https://www.youtube.com/watch?v=10Jg_25ytU0

[olliejoelinney]

Evaluation

To start off the project, we were introduced to the idea of a travelling library, holding books that we produced with the subject “eavesdropping”. I normally eavesdrop on people naturally (which is one of the ways I can get into conversations), although I was a little daunting knowing that I’d have to do this actively and on purpose.

 After seeing a presentation of a video featuring Raul lemesoff (driving a travelling library), giving books to families and children; I was convinced that the book I was creating should be created for children (after all, I behave like one). So associated with one memorable book from my childhood – Ladybird books. This childhood creativity was then enhanced after playing a childhood game of Chinese whispers with the whole of class.

 I wanted to produce the book initially for children. As for layout, I was using the “Ladybird book” format of text on the left, image on the right; but with the unpredictable story plot and context, it would be better suited to a teenage audience.

Most of my research has come from looking at book Layout, and colour combinations for preparing to eventually print on a risograph printer. I though the colours would provide a book that would stand out to children as they’d walk past.  

The best Ideas should’ve been the first to come to mind. The “conversation on the train” was one of the first eavesdrops that I heard, but I still waited weeks to see If anything better would come up. The reason I used the conversation as a basis of the book, was that it was the only eavesdrops I could visualize a narrative immediately, and vividly. The best Ideas came when I wasn’t consciously thinking about the Ideas. Mark making with Kate Brinksworth helped loosening up my drawing and painting (even more than it was.

In development, I had to create the story first, by writing each pages content into a notebook. After which, I wrote straight onto A5 paper and matched to Illustrations drawn roughly on facing pages. I then bound the pages together to stop me losing the order of the pages, and for convenience as a working draft. This cut out having to carry around a big storyboard with only tiny thumbnails showing a fraction of what would really be on each page.  

There was one relevant practitioner I looked at. Although mainly at his content in his book “750 years in Paris”. Vincent Mahe’ used screen printed images, with recurring colours all highlighted with orange (in this one particular book). I wanted to use Bright colours from the start of the project to produce striking images; and if not technically accurate, they do stand out.

I researched myself as well. What do I find funny? What makes me tick? What happens if I do this? All to achieve a spontaneous story.

All of the other research used was towards layout and composition. I haven’t made a book before, so I thought of looking at the best presented, but the simplest of books. 

To edit my Initial scanned Images and text, and add the blue overlays, I used Photoshop. To convert any lines to vectors, I used Adobe Illustrator. And then to produce the layout for the booklet I used Adobe InDesign. When printing 2 spreads on A3 paper, I used “Multiple print” setting, then printed to pdf. I then printed that final pdf as a single page. If I would’ve done it again, I would have used only Photoshop and illustrator, because of the ability to turn layers on and off.

For making a 2 colour Print on the risograph, I had to create an InDesign file with linked files, I could edit, so that I could turn layers on and off (to create two colour separations). I liked the overprint effect the risograph makes, so I chose 2 contrasting colours for my book (pink and blue).

I imposed 2 spreads on A3 pages (2 to a page), and printed from each pdf file. Odd pages first. Then even (when printing on the back of the sheets)

The risograph was a new Process to me. I could have used a normal CMYK print to print my work, but the overprints on the risograph can only be achieved when screen-printing. The colour is ready-mixed. The process If quite unpredictable which is reflected in the story of the book.

I also want to get to use the process more, so to make a whole book, on my first attempt, provides a steep learning curve.

The only thing I would judge as being completely successful, Is the CMYK print copy of the book. While it was duller than the Risograph prints, the registration was good, the colours were accurate to the digital copy, and the text wasn’t cut up. I was also able to print it on the same paper as my risograph prints. Although with inkjet prints, the paper becomes too glossy for the effect I wanted to achieve. The other thing that’s successful, is the fact that I’ve stuck to the brief. My Project still relates to eavesdropping. It may have turned into an improvised story, but it started with eavesdropping.

 I had to keep reconfiguring the pdf booklet files that were imposed onto A3, the registration was always off, as well as consistent misprints. I got yesterday that this was because I needed to flatten the original files before Importing into InDesign, because the pdf can still pick up any faults in the files. I know for next time.

   If I could try the project again, I’d get my book professionally printed on risograph. Somewhere like ROPE PRESS, and print a batch. That would beat any conventional printers in colour and quality. If it would be faster, I’d involve screen printing into the book, and with a thicker cover (card). I’ll concentrate on refining my drawings more in the future, and going with first ideas quickly, so I can get into drawing, rather than thinking what to draw.

[olliejoelinney]

Backup Book

After printing my risograph copies for the book yesterday, I realised that the story may get lost when the book’s read (due to a glitch when printing text onto some pages). As a backup, Iv’e printed a coloured CMYK version of my book at A5 size, as an accurate representation as to what it should have turned out when printing on the risograph (text/ background)

[olliejoelinney]

Finished “RANDOM RABBIT” - Risograph book

48 pages total -Including cover

[olliejoelinney]

Cropping/Binding

While cropping each of the books (piles of paper), Iv’e found that on the 2nd page in, the text is so misaligned, If I was to crop it as it is, the 1st page wouldn't be readable. To correct this, Iv’e cut 5mm off the opposite edge, so that there’s room for the text. Although it does mean the endpapers will have a white line on the edge. (although that ads to the imperfection of printing on the risograph)

[olliejoelinney]

I Wish I wouldve printed an image instead of pdf pages

while pdf pages are presented neatly in order in a document, from printing them, It’s turned into quite a hastle printing from pdf. text glitches, and unwanted anomelys mean the pages were unpredictable in how they printed

It may be due to the version of the pdf i was saving, although i havent had time to test this, as the risograph printer at uni, Is/was being used for most of the 2nd and 3rd years work

had I done it again, I would have either printed png’s/ jpegs, or photocoppied printouts

Iv’e now found out that this could’ve been avoided If I would have “flattened” the image on photoshop

[olliejoelinney]

Printing Book 

Following Jo Newman’s advice of printing on thicker paper, I'd ordered an A3 sketchpad, to use the paper for printing on, the thicker paper may also absorb the riso Ink better (as the ink takes days to fully cure)

Iv’e spent most of the day trying to Line up the other side of the prints to print pink. I also risked running through the blue layer of the prints, expecting track marks (from printer rollers) to appear all over the paper where the ink’s wet. Fortunately there's been no track marks, although the registration wasn't at all accurate (which is to be expected) 

One issue that’s Unexpected, Is the pink boxes that have printed out on the text pages. I don’t know why the Risograph printed it out that way, but I’m unable to print a 2nd run of prints, as It’s already take a week to set up a PDF file that prints correctly from the computer that’s connected to it ( which still only runs windows xp!!!!!!)

Tomorrow, I need to figure out a way of lining up the 12 spreads, so that no text, or significant amounts of images are cropped when binding.  

[olliejoelinney]

major miss-registration

While printing on the risograph, I was expecting Mis-registration to occur, but not like this (above). It seems both of the blue layers were somehow enlarged (or printed “actual size” instead of “fit”) before they were imposed onto a3 to correct this mistake, I’m going to have to re-size them in Photoshop and rub out any crop and registration marks (In case registration is off, the next time i print)

[olliejoelinney]

Mistake made judging sketchbook paper thickness

Dummy book (right) consisted of 11 pages, I was measuring 22 pages, twice the thickness as to what’s needed. Normal copier paper is about 60gsm, the sketchbook paper is 95gsm, so only slightly thicker. so I will now print on this thicker paper from my sketchbook

[olliejoelinney]

Precautions to take for Riso printing

After witnessing someone today completely destroy their artwork in the Risograph, by creating a paper Jam, I thought I may familiarise myself with the risks of Risograph printing

http://www.workflowstudio.co.uk/risograph-printing

[olliejoelinney]

Wrong page order

Two spreads on each page, but are meant to print back to back. got to shuffle up the order of printing, or resort to using a4 paper to print

Had to order pages 1,3,2,4  5,7,6,8 9,11,10,12

This was still the wrong order, and as shown in the photos, Iv’e had to map out the page order in multiples of 4.

[olliejoelinney]

Constructing the cover

Iv’e used a knife painted piece of paper, which was initially scrap, but iv’e been able to scan it in and convert to black and white, to create a sandy texture to the cover.

I’ve printed letterpress type on different coloured card, to see if there's any difference when scanning each sample in to editing Photoshop. (I found out white and blue worked best)

I also redrew the rabbit from the centrefold, to enlarge, and put on the cover, so that the cover is relevant to the book.

It’s at this stage in the project, where I realise the process of creating my book is very technical. There’s nothing wrong with that, I wanted it that way, because I like to be challenged, and be presented with difficulties, to bring a greater sense of achievement. 

With printing on the Risograph, the creative ability lies in the technical ability first. Without that, I wouldn't have been able to use the Risograph, and create unique effects with fluorescent ink.

[olliejoelinney]

The book now has a name- RANDOM RABBIT

After struggling for a name for the past week, for my book, 

I knew I couldn't name it a logical name, like “a clown left alone”, or “Larry and Garry”, so I looked on the centrefold page, and found a “random” little rabbit I’d drawn, initially for comedic purposes (like an Easter egg in video games).

So just like a “Where's Wally” book, where Wally can sometimes only appear on one page in a whole book; the rabbit appears on the centrefold. 

[olliejoelinney]

Endpapers designs

Reminiscent of old marbled pages from old books, there's a method of using shaving foam to create a marbling effect on paper with acrylic or ink,

 However, I don’t have shaving foam (I don’t even shave), so ‘Im carrying through the theme of using knife painting to produce in blue Risograph ink. when printing on layers, I’ll have to use the same half-tone as i use on the pink background (60) instead of the half-tone i use for the blue. this will be tricky because altering half-tones on a printer spread page, will mean altering the look of the half-tones on the blue lines of the main book pages (image outlines), unless both endpapers are printed on the same spread. which would then mean simply swapping out the colour

The cover page is missing text, to give any information on the book, like a “foreword” or “blurb”, I don’t want to use another page for a foreword, so I’ve decided to put a “Disclaimer” on the endpaper

I made this decision after watching an episode of Law & Order UK, to Include a disclaimer in my book.  There’s a disclaimer at the end of the show, in case any court cases Imitate, or are inspired by real court cases going on at the time. 

As a humorous take on this, Iv’e decided to include the quote in the disclaimer for the book. Its highly unlikely, and Ironic if there’s any similarities between the story and other people, because of the bizarreness of the storyline (other than myself)

[olliejoelinney]

Test prints from Risograph

While at first sight, the test print turned out accurate, there’s a problem.

There’s a glitch In the Risograph printing programme that sometimes decide to make artwork into a puzzle, by cutting up text and images, or printing them in the wrong place. This happened to “Garry’s” legs in the picture, and it also cut up some text. 

Although I didn't want the effect, It ads to the confusion of the story, just like the “eavesdrop” was a confusion to me.